xref: /illumos-gate/usr/src/uts/i86pc/io/isa.c (revision d4039345)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2014 Garrett D'Amore <garrett@damore.org>
23  * Copyright (c) 2012 Gary Mills
24  * Copyright (c) 1992, 2010, Oracle and/or its affiliates. All rights reserved.
25  */
26 
27 /*
28  *	ISA bus nexus driver
29  */
30 
31 #include <sys/types.h>
32 #include <sys/cmn_err.h>
33 #include <sys/conf.h>
34 #include <sys/modctl.h>
35 #include <sys/autoconf.h>
36 #include <sys/errno.h>
37 #include <sys/debug.h>
38 #include <sys/kmem.h>
39 #include <sys/psm.h>
40 #include <sys/ddidmareq.h>
41 #include <sys/ddi_impldefs.h>
42 #include <sys/ddi_subrdefs.h>
43 #include <sys/dma_engine.h>
44 #include <sys/ddi.h>
45 #include <sys/sunddi.h>
46 #include <sys/sunndi.h>
47 #include <sys/acpi/acpi_enum.h>
48 #include <sys/mach_intr.h>
49 #include <sys/pci.h>
50 #include <sys/note.h>
51 #include <sys/boot_console.h>
52 #include <sys/apic.h>
53 #if defined(__xpv)
54 #include <sys/hypervisor.h>
55 #include <sys/evtchn_impl.h>
56 
57 extern int console_hypervisor_dev_type(int *);
58 #endif
59 
60 
61 extern int pseudo_isa;
62 extern int isa_resource_setup(void);
63 extern int (*psm_intr_ops)(dev_info_t *, ddi_intr_handle_impl_t *,
64     psm_intr_op_t, int *);
65 extern void pci_register_isa_resources(int, uint32_t, uint32_t);
66 static void isa_enumerate(int);
67 static void enumerate_BIOS_serial(dev_info_t *);
68 static void adjust_prtsz(dev_info_t *isa_dip);
69 static void isa_create_ranges_prop(dev_info_t *);
70 
71 #define	USED_RESOURCES	"used-resources"
72 
73 /*
74  * The following typedef is used to represent an entry in the "ranges"
75  * property of a pci-isa bridge device node.
76  */
77 typedef struct {
78 	uint32_t child_high;
79 	uint32_t child_low;
80 	uint32_t parent_high;
81 	uint32_t parent_mid;
82 	uint32_t parent_low;
83 	uint32_t size;
84 } pib_ranges_t;
85 
86 typedef struct {
87 	uint32_t base;
88 	uint32_t len;
89 } used_ranges_t;
90 
91 #define	USED_CELL_SIZE	2	/* 1 byte addr, 1 byte size */
92 #define	ISA_ADDR_IO	1	/* IO address space */
93 #define	ISA_ADDR_MEM	0	/* memory adress space */
94 
95 /*
96  * #define ISA_DEBUG 1
97  */
98 
99 #define	num_BIOS_serial	4	/* number of BIOS serial ports to look at */
100 #define	min_BIOS_serial	2	/* minimum number of BIOS serial ports */
101 #define	COM_ISR		2	/* 16550 intr status register */
102 #define	COM_SCR		7	/* 16550 scratch register */
103 
104 /*
105  * For serial ports not enumerated by ACPI, and parallel ports with
106  * illegal size. Typically, a system can have as many as 4 serial
107  * ports and 3 parallel ports.
108  */
109 #define	MAX_EXTRA_RESOURCE	7
110 static struct regspec isa_extra_resource[MAX_EXTRA_RESOURCE];
111 static int isa_extra_count = 0;
112 
113 /* Register definitions for COM1 to COM4. */
114 static struct regspec asy_regs[] = {
115 	{1, 0x3f8, 0x8},
116 	{1, 0x2f8, 0x8},
117 	{1, 0x3e8, 0x8},
118 	{1, 0x2e8, 0x8}
119 };
120 
121 /* Serial port interrupt vectors for COM1 to COM4. */
122 static int asy_intrs[] = {0x4, 0x3, 0x4, 0x3};
123 /* Bitfield indicating which interrupts are overridden by eeprom config */
124 static uchar_t asy_intr_override = 0;
125 
126 /*
127  *      Local data
128  */
129 
130 static ddi_dma_attr_t ISA_dma_attr = {
131 	DMA_ATTR_V0,
132 	(unsigned long long)0,
133 	(unsigned long long)0x00ffffff,
134 	0x0000ffff,
135 	1,
136 	1,
137 	1,
138 	(unsigned long long)0xffffffff,
139 	(unsigned long long)0x0000ffff,
140 	1,
141 	1,
142 	0
143 };
144 
145 
146 /*
147  * Config information
148  */
149 
150 static int
151 isa_bus_map(dev_info_t *dip, dev_info_t *rdip, ddi_map_req_t *mp,
152     off_t offset, off_t len, caddr_t *vaddrp);
153 
154 static int
155 isa_dma_allochdl(dev_info_t *, dev_info_t *, ddi_dma_attr_t *,
156     int (*waitfp)(caddr_t), caddr_t arg, ddi_dma_handle_t *);
157 
158 static int
159 isa_dma_mctl(dev_info_t *, dev_info_t *, ddi_dma_handle_t, enum ddi_dma_ctlops,
160     off_t *, size_t *, caddr_t *, uint_t);
161 
162 static int
163 isa_ctlops(dev_info_t *, dev_info_t *, ddi_ctl_enum_t, void *, void *);
164 
165 static int
166 isa_intr_ops(dev_info_t *pdip, dev_info_t *rdip, ddi_intr_op_t intr_op,
167     ddi_intr_handle_impl_t *hdlp, void *result);
168 static int isa_alloc_intr_fixed(dev_info_t *, ddi_intr_handle_impl_t *, void *);
169 static int isa_free_intr_fixed(dev_info_t *, ddi_intr_handle_impl_t *);
170 
171 struct bus_ops isa_bus_ops = {
172 	BUSO_REV,
173 	isa_bus_map,
174 	NULL,
175 	NULL,
176 	NULL,
177 	i_ddi_map_fault,
178 	NULL,
179 	isa_dma_allochdl,
180 	ddi_dma_freehdl,
181 	ddi_dma_bindhdl,
182 	ddi_dma_unbindhdl,
183 	ddi_dma_flush,
184 	ddi_dma_win,
185 	isa_dma_mctl,
186 	isa_ctlops,
187 	ddi_bus_prop_op,
188 	NULL,		/* (*bus_get_eventcookie)();	*/
189 	NULL,		/* (*bus_add_eventcall)();	*/
190 	NULL,		/* (*bus_remove_eventcall)();	*/
191 	NULL,		/* (*bus_post_event)();		*/
192 	NULL,		/* (*bus_intr_ctl)(); */
193 	NULL,		/* (*bus_config)(); */
194 	NULL,		/* (*bus_unconfig)(); */
195 	NULL,		/* (*bus_fm_init)(); */
196 	NULL,		/* (*bus_fm_fini)(); */
197 	NULL,		/* (*bus_fm_access_enter)(); */
198 	NULL,		/* (*bus_fm_access_exit)(); */
199 	NULL,		/* (*bus_power)(); */
200 	isa_intr_ops	/* (*bus_intr_op)(); */
201 };
202 
203 
204 static int isa_attach(dev_info_t *devi, ddi_attach_cmd_t cmd);
205 
206 /*
207  * Internal isa ctlops support routines
208  */
209 static int isa_initchild(dev_info_t *child);
210 
211 struct dev_ops isa_ops = {
212 	DEVO_REV,		/* devo_rev, */
213 	0,			/* refcnt  */
214 	ddi_no_info,		/* info */
215 	nulldev,		/* identify */
216 	nulldev,		/* probe */
217 	isa_attach,		/* attach */
218 	nulldev,		/* detach */
219 	nodev,			/* reset */
220 	(struct cb_ops *)0,	/* driver operations */
221 	&isa_bus_ops,		/* bus operations */
222 	NULL,			/* power */
223 	ddi_quiesce_not_needed,		/* quiesce */
224 };
225 
226 /*
227  * Module linkage information for the kernel.
228  */
229 
230 static struct modldrv modldrv = {
231 	&mod_driverops, /* Type of module.  This is ISA bus driver */
232 	"isa nexus driver for 'ISA'",
233 	&isa_ops,	/* driver ops */
234 };
235 
236 static struct modlinkage modlinkage = {
237 	MODREV_1,
238 	&modldrv,
239 	NULL
240 };
241 
242 int
243 _init(void)
244 {
245 	int	err;
246 	char tty_irq_param[9] = "ttyX-irq";
247 	char *tty_irq;
248 	int i;
249 
250 	if ((err = mod_install(&modlinkage)) != 0)
251 		return (err);
252 
253 	/* Check if any tty irqs are overridden by eeprom config */
254 	for (i = 0; i < num_BIOS_serial; i++) {
255 		tty_irq_param[3] = 'a' + i;
256 		if (ddi_prop_lookup_string(DDI_DEV_T_ANY, ddi_root_node(),
257 		    DDI_PROP_DONTPASS, tty_irq_param, &tty_irq)
258 		    == DDI_PROP_SUCCESS) {
259 			long data;
260 
261 			if (ddi_strtol(tty_irq, NULL, 0, &data) == 0) {
262 				asy_intrs[i] = (int)data;
263 				asy_intr_override |= 1<<i;
264 			}
265 
266 			ddi_prop_free(tty_irq);
267 		}
268 	}
269 
270 	impl_bus_add_probe(isa_enumerate);
271 	return (0);
272 }
273 
274 int
275 _fini(void)
276 {
277 	int	err;
278 
279 	impl_bus_delete_probe(isa_enumerate);
280 
281 	if ((err = mod_remove(&modlinkage)) != 0)
282 		return (err);
283 
284 	return (0);
285 }
286 
287 int
288 _info(struct modinfo *modinfop)
289 {
290 	return (mod_info(&modlinkage, modinfop));
291 }
292 
293 static int
294 isa_attach(dev_info_t *devi, ddi_attach_cmd_t cmd)
295 {
296 	int rval;
297 
298 #if defined(__xpv)
299 	/*
300 	 * don't allow isa to attach in domU. this can happen if someone sets
301 	 * the console wrong, etc. ISA devices assume the H/W is there and
302 	 * will cause the domU to panic.
303 	 */
304 	if (!DOMAIN_IS_INITDOMAIN(xen_info)) {
305 		return (DDI_FAILURE);
306 	}
307 #endif
308 
309 	switch (cmd) {
310 	case DDI_ATTACH:
311 		break;
312 	case DDI_RESUME:
313 		return (DDI_SUCCESS);
314 	default:
315 		return (DDI_FAILURE);
316 	}
317 
318 	if ((rval = i_dmae_init(devi)) == DDI_SUCCESS)
319 		ddi_report_dev(devi);
320 
321 	return (rval);
322 }
323 
324 #define	SET_RNGS(rng_p, used_p, ctyp, ptyp) do {			\
325 		(rng_p)->child_high = (ctyp);				\
326 		(rng_p)->child_low = (rng_p)->parent_low = (used_p)->base; \
327 		(rng_p)->parent_high = (ptyp);				\
328 		(rng_p)->parent_mid = 0;				\
329 		(rng_p)->size = (used_p)->len;				\
330 		_NOTE(CONSTCOND) } while (0)
331 static uint_t
332 isa_used_to_ranges(int ctype, int *array, uint_t size, pib_ranges_t *ranges)
333 {
334 	used_ranges_t *used_p;
335 	pib_ranges_t *rng_p = ranges;
336 	uint_t	i, ptype;
337 
338 	ptype = (ctype == ISA_ADDR_IO) ? PCI_ADDR_IO : PCI_ADDR_MEM32;
339 	ptype |= PCI_REG_REL_M;
340 	size /= USED_CELL_SIZE;
341 	used_p = (used_ranges_t *)array;
342 	SET_RNGS(rng_p, used_p, ctype, ptype);
343 	for (i = 1, used_p++; i < size; i++, used_p++) {
344 		/* merge ranges record if applicable */
345 		if (rng_p->child_low + rng_p->size == used_p->base)
346 			rng_p->size += used_p->len;
347 		else {
348 			rng_p++;
349 			SET_RNGS(rng_p, used_p, ctype, ptype);
350 		}
351 	}
352 	return (rng_p - ranges + 1);
353 }
354 
355 void
356 isa_remove_res_from_pci(int type, int *array, uint_t size)
357 {
358 	int i;
359 	used_ranges_t *used_p;
360 
361 	size /= USED_CELL_SIZE;
362 	used_p = (used_ranges_t *)array;
363 	for (i = 0; i < size; i++, used_p++)
364 		pci_register_isa_resources(type, used_p->base, used_p->len);
365 }
366 
367 static void
368 isa_create_ranges_prop(dev_info_t *dip)
369 {
370 	dev_info_t *used;
371 	int *ioarray, *memarray, status;
372 	uint_t nio = 0, nmem = 0, nrng = 0, n;
373 	pib_ranges_t *ranges;
374 
375 	used = ddi_find_devinfo(USED_RESOURCES, -1, 0);
376 	if (used == NULL) {
377 		cmn_err(CE_WARN, "Failed to find used-resources <%s>\n",
378 		    ddi_get_name(dip));
379 		return;
380 	}
381 	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, used,
382 	    DDI_PROP_DONTPASS, "io-space", &ioarray, &nio);
383 	if (status != DDI_PROP_SUCCESS && status != DDI_PROP_NOT_FOUND) {
384 		cmn_err(CE_WARN, "io-space property failure for %s (%x)\n",
385 		    ddi_get_name(used), status);
386 		return;
387 	}
388 	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, used,
389 	    DDI_PROP_DONTPASS, "device-memory", &memarray, &nmem);
390 	if (status != DDI_PROP_SUCCESS && status != DDI_PROP_NOT_FOUND) {
391 		cmn_err(CE_WARN, "device-memory property failure for %s (%x)\n",
392 		    ddi_get_name(used), status);
393 		return;
394 	}
395 	n = (nio + nmem) / USED_CELL_SIZE;
396 	ranges =  (pib_ranges_t *)kmem_zalloc(sizeof (pib_ranges_t) * n,
397 	    KM_SLEEP);
398 
399 	if (nio != 0) {
400 		nrng = isa_used_to_ranges(ISA_ADDR_IO, ioarray, nio, ranges);
401 		isa_remove_res_from_pci(ISA_ADDR_IO, ioarray, nio);
402 		ddi_prop_free(ioarray);
403 	}
404 	if (nmem != 0) {
405 		nrng += isa_used_to_ranges(ISA_ADDR_MEM, memarray, nmem,
406 		    ranges + nrng);
407 		isa_remove_res_from_pci(ISA_ADDR_MEM, memarray, nmem);
408 		ddi_prop_free(memarray);
409 	}
410 
411 	if (!pseudo_isa)
412 		(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "ranges",
413 		    (int *)ranges, nrng * sizeof (pib_ranges_t) / sizeof (int));
414 	kmem_free(ranges, sizeof (pib_ranges_t) * n);
415 }
416 
417 /*ARGSUSED*/
418 static int
419 isa_apply_range(dev_info_t *dip, struct regspec *isa_reg_p,
420     pci_regspec_t *pci_reg_p)
421 {
422 	pib_ranges_t *ranges, *rng_p;
423 	int len, i, offset, nrange;
424 
425 	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
426 	    "ranges", (caddr_t)&ranges, &len) != DDI_SUCCESS) {
427 		cmn_err(CE_WARN, "Can't get %s ranges property",
428 		    ddi_get_name(dip));
429 		return (DDI_ME_REGSPEC_RANGE);
430 	}
431 	nrange = len / sizeof (pib_ranges_t);
432 	rng_p = ranges;
433 	for (i = 0; i < nrange; i++, rng_p++) {
434 		/* Check for correct space */
435 		if (isa_reg_p->regspec_bustype != rng_p->child_high)
436 			continue;
437 
438 		/* Detect whether request entirely fits within a range */
439 		if (isa_reg_p->regspec_addr < rng_p->child_low)
440 			continue;
441 		if ((isa_reg_p->regspec_addr + isa_reg_p->regspec_size - 1) >
442 		    (rng_p->child_low + rng_p->size - 1))
443 			continue;
444 
445 		offset = isa_reg_p->regspec_addr - rng_p->child_low;
446 
447 		pci_reg_p->pci_phys_hi = rng_p->parent_high;
448 		pci_reg_p->pci_phys_mid = 0;
449 		pci_reg_p->pci_phys_low = rng_p->parent_low + offset;
450 		pci_reg_p->pci_size_hi = 0;
451 		pci_reg_p->pci_size_low = isa_reg_p->regspec_size;
452 
453 		break;
454 	}
455 	kmem_free(ranges, len);
456 
457 	if (i < nrange)
458 		return (DDI_SUCCESS);
459 
460 	/*
461 	 * Check extra resource range specially for serial and parallel
462 	 * devices, which are treated differently from all other ISA
463 	 * devices. On some machines, serial ports are not enumerated
464 	 * by ACPI but by BIOS, with io base addresses noted in legacy
465 	 * BIOS data area. Parallel port on some machines comes with
466 	 * illegal size.
467 	 */
468 	if (isa_reg_p->regspec_bustype != ISA_ADDR_IO) {
469 		cmn_err(CE_WARN, "Bus type not ISA I/O\n");
470 		return (DDI_ME_REGSPEC_RANGE);
471 	}
472 
473 	for (i = 0; i < isa_extra_count; i++) {
474 		struct regspec *reg_p = &isa_extra_resource[i];
475 
476 		if (isa_reg_p->regspec_addr < reg_p->regspec_addr)
477 			continue;
478 		if ((isa_reg_p->regspec_addr + isa_reg_p->regspec_size) >
479 		    (reg_p->regspec_addr + reg_p->regspec_size))
480 			continue;
481 
482 		pci_reg_p->pci_phys_hi = PCI_ADDR_IO | PCI_REG_REL_M;
483 		pci_reg_p->pci_phys_mid = 0;
484 		pci_reg_p->pci_phys_low = isa_reg_p->regspec_addr;
485 		pci_reg_p->pci_size_hi = 0;
486 		pci_reg_p->pci_size_low = isa_reg_p->regspec_size;
487 		break;
488 	}
489 	if (i < isa_extra_count)
490 		return (DDI_SUCCESS);
491 
492 	cmn_err(CE_WARN, "isa_apply_range: Out of range base <0x%x>, size <%d>",
493 	    isa_reg_p->regspec_addr, isa_reg_p->regspec_size);
494 	return (DDI_ME_REGSPEC_RANGE);
495 }
496 
497 static int
498 isa_bus_map(dev_info_t *dip, dev_info_t *rdip, ddi_map_req_t *mp,
499     off_t offset, off_t len, caddr_t *vaddrp)
500 {
501 	struct regspec tmp_reg, *rp;
502 	pci_regspec_t vreg;
503 	ddi_map_req_t mr = *mp;		/* Get private copy of request */
504 	int error;
505 
506 	if (pseudo_isa)
507 		return (i_ddi_bus_map(dip, rdip, mp, offset, len, vaddrp));
508 
509 	mp = &mr;
510 
511 	/*
512 	 * First, if given an rnumber, convert it to a regspec...
513 	 */
514 	if (mp->map_type == DDI_MT_RNUMBER)  {
515 
516 		int rnumber = mp->map_obj.rnumber;
517 
518 		rp = i_ddi_rnumber_to_regspec(rdip, rnumber);
519 		if (rp == (struct regspec *)0)
520 			return (DDI_ME_RNUMBER_RANGE);
521 
522 		/*
523 		 * Convert the given ddi_map_req_t from rnumber to regspec...
524 		 */
525 		mp->map_type = DDI_MT_REGSPEC;
526 		mp->map_obj.rp = rp;
527 	}
528 
529 	/*
530 	 * Adjust offset and length correspnding to called values...
531 	 * XXX: A non-zero length means override the one in the regspec.
532 	 * XXX: (Regardless of what's in the parent's range)
533 	 */
534 
535 	tmp_reg = *(mp->map_obj.rp);		/* Preserve underlying data */
536 	rp = mp->map_obj.rp = &tmp_reg;		/* Use tmp_reg in request */
537 
538 	rp->regspec_addr += (uint_t)offset;
539 	if (len != 0)
540 		rp->regspec_size = (uint_t)len;
541 
542 	if ((error = isa_apply_range(dip, rp, &vreg)) != 0)
543 		return (error);
544 	mp->map_obj.rp = (struct regspec *)&vreg;
545 
546 	/*
547 	 * Call my parents bus_map function with modified values...
548 	 */
549 
550 	return (ddi_map(dip, mp, (off_t)0, (off_t)0, vaddrp));
551 }
552 
553 static int
554 isa_dma_allochdl(dev_info_t *dip, dev_info_t *rdip, ddi_dma_attr_t *dma_attr,
555     int (*waitfp)(caddr_t), caddr_t arg, ddi_dma_handle_t *handlep)
556 {
557 	ddi_dma_attr_merge(dma_attr, &ISA_dma_attr);
558 	return (ddi_dma_allochdl(dip, rdip, dma_attr, waitfp, arg, handlep));
559 }
560 
561 static int
562 isa_dma_mctl(dev_info_t *dip, dev_info_t *rdip,
563     ddi_dma_handle_t handle, enum ddi_dma_ctlops request,
564     off_t *offp, size_t *lenp, caddr_t *objp, uint_t flags)
565 {
566 	int rval;
567 	int arg = (int)(uintptr_t)objp;
568 
569 	switch (request) {
570 
571 	case DDI_DMA_E_PROG:
572 		return (i_dmae_prog(rdip, (struct ddi_dmae_req *)offp,
573 		    (ddi_dma_cookie_t *)lenp, arg));
574 
575 	case DDI_DMA_E_ACQUIRE:
576 		return (i_dmae_acquire(rdip, arg, (int(*)(caddr_t))offp,
577 		    (caddr_t)lenp));
578 
579 	case DDI_DMA_E_FREE:
580 		return (i_dmae_free(rdip, arg));
581 
582 	case DDI_DMA_E_STOP:
583 		i_dmae_stop(rdip, arg);
584 		return (DDI_SUCCESS);
585 
586 	case DDI_DMA_E_ENABLE:
587 		i_dmae_enable(rdip, arg);
588 		return (DDI_SUCCESS);
589 
590 	case DDI_DMA_E_DISABLE:
591 		i_dmae_disable(rdip, arg);
592 		return (DDI_SUCCESS);
593 
594 	case DDI_DMA_E_GETCNT:
595 		i_dmae_get_chan_stat(rdip, arg, NULL, (int *)lenp);
596 		return (DDI_SUCCESS);
597 
598 	case DDI_DMA_E_SWSETUP:
599 		return (i_dmae_swsetup(rdip, (struct ddi_dmae_req *)offp,
600 		    (ddi_dma_cookie_t *)lenp, arg));
601 
602 	case DDI_DMA_E_SWSTART:
603 		i_dmae_swstart(rdip, arg);
604 		return (DDI_SUCCESS);
605 
606 	case DDI_DMA_E_GETATTR:
607 		bcopy(&ISA_dma_attr, objp, sizeof (ddi_dma_attr_t));
608 		return (DDI_SUCCESS);
609 
610 	case DDI_DMA_E_1STPTY:
611 		{
612 			struct ddi_dmae_req req1stpty =
613 			    { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
614 			if (arg == 0) {
615 				req1stpty.der_command = DMAE_CMD_TRAN;
616 				req1stpty.der_trans = DMAE_TRANS_DMND;
617 			} else {
618 				req1stpty.der_trans = DMAE_TRANS_CSCD;
619 			}
620 			return (i_dmae_prog(rdip, &req1stpty, NULL, arg));
621 		}
622 
623 	default:
624 		/*
625 		 * We pass to rootnex, but it turns out that rootnex will just
626 		 * return failure, as we don't use ddi_dma_mctl() except
627 		 * for DMA engine (ISA) and DVMA (SPARC).  Arguably we could
628 		 * just return an error direclty here, instead.
629 		 */
630 		rval = ddi_dma_mctl(dip, rdip, handle, request, offp,
631 		    lenp, objp, flags);
632 	}
633 	return (rval);
634 }
635 
636 /*
637  * Check if driver should be treated as an old pre 2.6 driver
638  */
639 static int
640 old_driver(dev_info_t *dip)
641 {
642 	extern int ignore_hardware_nodes;	/* force flag from ddi_impl.c */
643 
644 	if (ndi_dev_is_persistent_node(dip)) {
645 		if (ignore_hardware_nodes)
646 			return (1);
647 		if (ddi_getprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
648 		    "ignore-hardware-nodes", -1) != -1)
649 			return (1);
650 	}
651 	return (0);
652 }
653 
654 typedef struct {
655 	uint32_t phys_hi;
656 	uint32_t phys_lo;
657 	uint32_t size;
658 } isa_regs_t;
659 
660 /*
661  * Return non-zero if device in tree is a PnP isa device
662  */
663 static int
664 is_pnpisa(dev_info_t *dip)
665 {
666 	isa_regs_t *isa_regs;
667 	int proplen, pnpisa;
668 
669 	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "reg",
670 	    (caddr_t)&isa_regs, &proplen) != DDI_PROP_SUCCESS) {
671 		return (0);
672 	}
673 	pnpisa = isa_regs[0].phys_hi & 0x80000000;
674 	/*
675 	 * free the memory allocated by ddi_getlongprop().
676 	 */
677 	kmem_free(isa_regs, proplen);
678 	if (pnpisa)
679 		return (1);
680 	else
681 		return (0);
682 }
683 
684 /*ARGSUSED*/
685 static int
686 isa_ctlops(dev_info_t *dip, dev_info_t *rdip,
687     ddi_ctl_enum_t ctlop, void *arg, void *result)
688 {
689 	int rn;
690 	struct ddi_parent_private_data *pdp;
691 
692 	switch (ctlop) {
693 	case DDI_CTLOPS_REPORTDEV:
694 		if (rdip == (dev_info_t *)0)
695 			return (DDI_FAILURE);
696 		cmn_err(CE_CONT, "?ISA-device: %s%d\n",
697 		    ddi_driver_name(rdip), ddi_get_instance(rdip));
698 		return (DDI_SUCCESS);
699 
700 	case DDI_CTLOPS_INITCHILD:
701 		/*
702 		 * older drivers aren't expecting the "standard" device
703 		 * node format used by the hardware nodes.  these drivers
704 		 * only expect their own properties set in their driver.conf
705 		 * files.  so they tell us not to call them with hardware
706 		 * nodes by setting the property "ignore-hardware-nodes".
707 		 */
708 		if (old_driver((dev_info_t *)arg)) {
709 			return (DDI_NOT_WELL_FORMED);
710 		}
711 
712 		return (isa_initchild((dev_info_t *)arg));
713 
714 	case DDI_CTLOPS_UNINITCHILD:
715 		impl_ddi_sunbus_removechild((dev_info_t *)arg);
716 		return (DDI_SUCCESS);
717 
718 	case DDI_CTLOPS_SIDDEV:
719 		if (ndi_dev_is_persistent_node(rdip))
720 			return (DDI_SUCCESS);
721 		/*
722 		 * All ISA devices need to do confirming probes
723 		 * unless they are PnP ISA.
724 		 */
725 		if (is_pnpisa(rdip))
726 			return (DDI_SUCCESS);
727 		else
728 			return (DDI_FAILURE);
729 
730 	case DDI_CTLOPS_REGSIZE:
731 	case DDI_CTLOPS_NREGS:
732 		if (rdip == (dev_info_t *)0)
733 			return (DDI_FAILURE);
734 
735 		if ((pdp = ddi_get_parent_data(rdip)) == NULL)
736 			return (DDI_FAILURE);
737 
738 		if (ctlop == DDI_CTLOPS_NREGS) {
739 			*(int *)result = pdp->par_nreg;
740 		} else {
741 			rn = *(int *)arg;
742 			if (rn >= pdp->par_nreg)
743 				return (DDI_FAILURE);
744 			*(off_t *)result = (off_t)pdp->par_reg[rn].regspec_size;
745 		}
746 		return (DDI_SUCCESS);
747 
748 	case DDI_CTLOPS_ATTACH:
749 	case DDI_CTLOPS_DETACH:
750 	case DDI_CTLOPS_PEEK:
751 	case DDI_CTLOPS_POKE:
752 		return (DDI_FAILURE);
753 
754 	default:
755 		return (ddi_ctlops(dip, rdip, ctlop, arg, result));
756 	}
757 }
758 
759 static struct intrspec *
760 isa_get_ispec(dev_info_t *rdip, int inum)
761 {
762 	struct ddi_parent_private_data *pdp = ddi_get_parent_data(rdip);
763 
764 	/* Validate the interrupt number */
765 	if (inum >= pdp->par_nintr)
766 		return (NULL);
767 
768 	/* Get the interrupt structure pointer and return that */
769 	return ((struct intrspec *)&pdp->par_intr[inum]);
770 }
771 
772 static int
773 isa_intr_ops(dev_info_t *pdip, dev_info_t *rdip, ddi_intr_op_t intr_op,
774     ddi_intr_handle_impl_t *hdlp, void *result)
775 {
776 	struct intrspec *ispec;
777 #if defined(__xpv)
778 	int cons, ttyn;
779 
780 	cons = console_hypervisor_dev_type(&ttyn);
781 #endif
782 	if (pseudo_isa)
783 		return (i_ddi_intr_ops(pdip, rdip, intr_op, hdlp, result));
784 
785 
786 	/* Process the interrupt operation */
787 	switch (intr_op) {
788 	case DDI_INTROP_GETCAP:
789 		/* First check with pcplusmp */
790 		if (psm_intr_ops == NULL)
791 			return (DDI_FAILURE);
792 
793 		if ((*psm_intr_ops)(rdip, hdlp, PSM_INTR_OP_GET_CAP, result)) {
794 			*(int *)result = 0;
795 			return (DDI_FAILURE);
796 		}
797 		break;
798 	case DDI_INTROP_SETCAP:
799 		if (psm_intr_ops == NULL)
800 			return (DDI_FAILURE);
801 
802 		if ((*psm_intr_ops)(rdip, hdlp, PSM_INTR_OP_SET_CAP, result))
803 			return (DDI_FAILURE);
804 		break;
805 	case DDI_INTROP_ALLOC:
806 		ASSERT(hdlp->ih_type == DDI_INTR_TYPE_FIXED);
807 		return (isa_alloc_intr_fixed(rdip, hdlp, result));
808 	case DDI_INTROP_FREE:
809 		ASSERT(hdlp->ih_type == DDI_INTR_TYPE_FIXED);
810 		return (isa_free_intr_fixed(rdip, hdlp));
811 	case DDI_INTROP_GETPRI:
812 		if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
813 			return (DDI_FAILURE);
814 		*(int *)result = ispec->intrspec_pri;
815 		break;
816 	case DDI_INTROP_SETPRI:
817 		/* Validate the interrupt priority passed to us */
818 		if (*(int *)result > LOCK_LEVEL)
819 			return (DDI_FAILURE);
820 
821 		/* Ensure that PSM is all initialized and ispec is ok */
822 		if ((psm_intr_ops == NULL) ||
823 		    ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL))
824 			return (DDI_FAILURE);
825 
826 		/* update the ispec with the new priority */
827 		ispec->intrspec_pri =  *(int *)result;
828 		break;
829 	case DDI_INTROP_ADDISR:
830 		if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
831 			return (DDI_FAILURE);
832 		ispec->intrspec_func = hdlp->ih_cb_func;
833 		break;
834 	case DDI_INTROP_REMISR:
835 		if (hdlp->ih_type != DDI_INTR_TYPE_FIXED)
836 			return (DDI_FAILURE);
837 		if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
838 			return (DDI_FAILURE);
839 		ispec->intrspec_func = (uint_t (*)()) 0;
840 		break;
841 	case DDI_INTROP_ENABLE:
842 		if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
843 			return (DDI_FAILURE);
844 
845 		/* Call psmi to translate irq with the dip */
846 		if (psm_intr_ops == NULL)
847 			return (DDI_FAILURE);
848 
849 #if defined(__xpv)
850 		/*
851 		 * if the hypervisor is using an isa serial port for the
852 		 * console, make sure we don't try to use that interrupt as
853 		 * it will cause us to panic when xen_bind_pirq() fails.
854 		 */
855 		if (cons == CONS_TTY && ispec->intrspec_vec == asy_intrs[ttyn])
856 			return (DDI_FAILURE);
857 #endif
858 		((ihdl_plat_t *)hdlp->ih_private)->ip_ispecp = ispec;
859 		if ((*psm_intr_ops)(rdip, hdlp, PSM_INTR_OP_XLATE_VECTOR,
860 		    (int *)&hdlp->ih_vector) == PSM_FAILURE)
861 			return (DDI_FAILURE);
862 
863 		/* Add the interrupt handler */
864 		if (!add_avintr((void *)hdlp, ispec->intrspec_pri,
865 		    hdlp->ih_cb_func, DEVI(rdip)->devi_name, hdlp->ih_vector,
866 		    hdlp->ih_cb_arg1, hdlp->ih_cb_arg2, NULL, rdip))
867 			return (DDI_FAILURE);
868 		break;
869 	case DDI_INTROP_DISABLE:
870 		if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
871 			return (DDI_FAILURE);
872 
873 		/* Call psm_ops() to translate irq with the dip */
874 		if (psm_intr_ops == NULL)
875 			return (DDI_FAILURE);
876 
877 		((ihdl_plat_t *)hdlp->ih_private)->ip_ispecp = ispec;
878 		(void) (*psm_intr_ops)(rdip, hdlp,
879 		    PSM_INTR_OP_XLATE_VECTOR, (int *)&hdlp->ih_vector);
880 
881 		/* Remove the interrupt handler */
882 		rem_avintr((void *)hdlp, ispec->intrspec_pri,
883 		    hdlp->ih_cb_func, hdlp->ih_vector);
884 		break;
885 	case DDI_INTROP_SETMASK:
886 		if (psm_intr_ops == NULL)
887 			return (DDI_FAILURE);
888 
889 		if ((*psm_intr_ops)(rdip, hdlp, PSM_INTR_OP_SET_MASK, NULL))
890 			return (DDI_FAILURE);
891 		break;
892 	case DDI_INTROP_CLRMASK:
893 		if (psm_intr_ops == NULL)
894 			return (DDI_FAILURE);
895 
896 		if ((*psm_intr_ops)(rdip, hdlp, PSM_INTR_OP_CLEAR_MASK, NULL))
897 			return (DDI_FAILURE);
898 		break;
899 	case DDI_INTROP_GETPENDING:
900 		if (psm_intr_ops == NULL)
901 			return (DDI_FAILURE);
902 
903 		if ((*psm_intr_ops)(rdip, hdlp, PSM_INTR_OP_GET_PENDING,
904 		    result)) {
905 			*(int *)result = 0;
906 			return (DDI_FAILURE);
907 		}
908 		break;
909 	case DDI_INTROP_NAVAIL:
910 	case DDI_INTROP_NINTRS:
911 		*(int *)result = i_ddi_get_intx_nintrs(rdip);
912 		if (*(int *)result == 0) {
913 			return (DDI_FAILURE);
914 		}
915 		break;
916 	case DDI_INTROP_SUPPORTED_TYPES:
917 		*(int *)result = DDI_INTR_TYPE_FIXED;	/* Always ... */
918 		break;
919 	default:
920 		return (DDI_FAILURE);
921 	}
922 
923 	return (DDI_SUCCESS);
924 }
925 
926 /*
927  * Allocate interrupt vector for FIXED (legacy) type.
928  */
929 static int
930 isa_alloc_intr_fixed(dev_info_t *rdip, ddi_intr_handle_impl_t *hdlp,
931     void *result)
932 {
933 	struct intrspec		*ispec;
934 	ddi_intr_handle_impl_t	info_hdl;
935 	int			ret;
936 	int			free_phdl = 0;
937 	apic_get_type_t		type_info;
938 
939 	if (psm_intr_ops == NULL)
940 		return (DDI_FAILURE);
941 
942 	if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
943 		return (DDI_FAILURE);
944 
945 	/*
946 	 * If the PSM module is "APIX" then pass the request for it
947 	 * to allocate the vector now.
948 	 */
949 	bzero(&info_hdl, sizeof (ddi_intr_handle_impl_t));
950 	info_hdl.ih_private = &type_info;
951 	if ((*psm_intr_ops)(NULL, &info_hdl, PSM_INTR_OP_APIC_TYPE, NULL) ==
952 	    PSM_SUCCESS && strcmp(type_info.avgi_type, APIC_APIX_NAME) == 0) {
953 		if (hdlp->ih_private == NULL) { /* allocate phdl structure */
954 			free_phdl = 1;
955 			i_ddi_alloc_intr_phdl(hdlp);
956 		}
957 		((ihdl_plat_t *)hdlp->ih_private)->ip_ispecp = ispec;
958 		ret = (*psm_intr_ops)(rdip, hdlp,
959 		    PSM_INTR_OP_ALLOC_VECTORS, result);
960 		if (free_phdl) { /* free up the phdl structure */
961 			free_phdl = 0;
962 			i_ddi_free_intr_phdl(hdlp);
963 			hdlp->ih_private = NULL;
964 		}
965 	} else {
966 		/*
967 		 * No APIX module; fall back to the old scheme where the
968 		 * interrupt vector is allocated during ddi_enable_intr() call.
969 		 */
970 		hdlp->ih_pri = ispec->intrspec_pri;
971 		*(int *)result = hdlp->ih_scratch1;
972 		ret = DDI_SUCCESS;
973 	}
974 
975 	return (ret);
976 }
977 
978 /*
979  * Free up interrupt vector for FIXED (legacy) type.
980  */
981 static int
982 isa_free_intr_fixed(dev_info_t *rdip, ddi_intr_handle_impl_t *hdlp)
983 {
984 	struct intrspec			*ispec;
985 	ddi_intr_handle_impl_t		info_hdl;
986 	int				ret;
987 	apic_get_type_t			type_info;
988 
989 	if (psm_intr_ops == NULL)
990 		return (DDI_FAILURE);
991 
992 	/*
993 	 * If the PSM module is "APIX" then pass the request for it
994 	 * to free up the vector now.
995 	 */
996 	bzero(&info_hdl, sizeof (ddi_intr_handle_impl_t));
997 	info_hdl.ih_private = &type_info;
998 	if ((*psm_intr_ops)(NULL, &info_hdl, PSM_INTR_OP_APIC_TYPE, NULL) ==
999 	    PSM_SUCCESS && strcmp(type_info.avgi_type, APIC_APIX_NAME) == 0) {
1000 		if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
1001 			return (DDI_FAILURE);
1002 		((ihdl_plat_t *)hdlp->ih_private)->ip_ispecp = ispec;
1003 		ret = (*psm_intr_ops)(rdip, hdlp,
1004 		    PSM_INTR_OP_FREE_VECTORS, NULL);
1005 	} else {
1006 		/*
1007 		 * No APIX module; fall back to the old scheme where
1008 		 * the interrupt vector was already freed during
1009 		 * ddi_disable_intr() call.
1010 		 */
1011 		ret = DDI_SUCCESS;
1012 	}
1013 
1014 	return (ret);
1015 }
1016 
1017 static void
1018 isa_vendor(uint32_t id, char *vendor)
1019 {
1020 	vendor[0] = '@' + ((id >> 26) & 0x1f);
1021 	vendor[1] = '@' + ((id >> 21) & 0x1f);
1022 	vendor[2] = '@' + ((id >> 16) & 0x1f);
1023 	vendor[3] = 0;
1024 }
1025 
1026 /*
1027  * Name a child
1028  */
1029 static int
1030 isa_name_child(dev_info_t *child, char *name, int namelen)
1031 {
1032 	char vendor[8];
1033 	int device;
1034 	uint32_t serial;
1035 	int func;
1036 	int bustype;
1037 	uint32_t base;
1038 	int proplen;
1039 	int pnpisa = 0;
1040 	isa_regs_t *isa_regs;
1041 
1042 	void make_ddi_ppd(dev_info_t *, struct ddi_parent_private_data **);
1043 
1044 	/*
1045 	 * older drivers aren't expecting the "standard" device
1046 	 * node format used by the hardware nodes.  these drivers
1047 	 * only expect their own properties set in their driver.conf
1048 	 * files.  so they tell us not to call them with hardware
1049 	 * nodes by setting the property "ignore-hardware-nodes".
1050 	 */
1051 	if (old_driver(child))
1052 		return (DDI_FAILURE);
1053 
1054 	/*
1055 	 * Fill in parent-private data
1056 	 */
1057 	if (ddi_get_parent_data(child) == NULL) {
1058 		struct ddi_parent_private_data *pdptr;
1059 		make_ddi_ppd(child, &pdptr);
1060 		ddi_set_parent_data(child, pdptr);
1061 	}
1062 
1063 	if (ndi_dev_is_persistent_node(child) == 0) {
1064 		/*
1065 		 * For .conf nodes, generate name from parent private data
1066 		 */
1067 		name[0] = '\0';
1068 		if (sparc_pd_getnreg(child) > 0) {
1069 			(void) snprintf(name, namelen, "%x,%x",
1070 			    (uint_t)sparc_pd_getreg(child, 0)->regspec_bustype,
1071 			    (uint_t)sparc_pd_getreg(child, 0)->regspec_addr);
1072 		}
1073 		return (DDI_SUCCESS);
1074 	}
1075 
1076 	/*
1077 	 * For hw nodes, look up "reg" property
1078 	 */
1079 	if (ddi_getlongprop(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS, "reg",
1080 	    (caddr_t)&isa_regs, &proplen) != DDI_PROP_SUCCESS) {
1081 		return (DDI_FAILURE);
1082 	}
1083 
1084 	/*
1085 	 * extract the device identifications
1086 	 */
1087 	pnpisa = isa_regs[0].phys_hi & 0x80000000;
1088 	if (pnpisa) {
1089 		isa_vendor(isa_regs[0].phys_hi, vendor);
1090 		device = isa_regs[0].phys_hi & 0xffff;
1091 		serial = isa_regs[0].phys_lo;
1092 		func = (isa_regs[0].size >> 24) & 0xff;
1093 		if (func != 0)
1094 			(void) snprintf(name, namelen, "pnp%s,%04x,%x,%x",
1095 			    vendor, device, serial, func);
1096 		else
1097 			(void) snprintf(name, namelen, "pnp%s,%04x,%x",
1098 			    vendor, device, serial);
1099 	} else {
1100 		bustype = isa_regs[0].phys_hi;
1101 		base = isa_regs[0].phys_lo;
1102 		(void) sprintf(name, "%x,%x", bustype, base);
1103 	}
1104 
1105 	/*
1106 	 * free the memory allocated by ddi_getlongprop().
1107 	 */
1108 	kmem_free(isa_regs, proplen);
1109 
1110 	return (DDI_SUCCESS);
1111 }
1112 
1113 static int
1114 isa_initchild(dev_info_t *child)
1115 {
1116 	char name[80];
1117 
1118 	if (isa_name_child(child, name, 80) != DDI_SUCCESS)
1119 		return (DDI_FAILURE);
1120 	ddi_set_name_addr(child, name);
1121 
1122 	if (ndi_dev_is_persistent_node(child) != 0)
1123 		return (DDI_SUCCESS);
1124 
1125 	/*
1126 	 * This is a .conf node, try merge properties onto a
1127 	 * hw node with the same name.
1128 	 */
1129 	if (ndi_merge_node(child, isa_name_child) == DDI_SUCCESS) {
1130 		/*
1131 		 * Return failure to remove node
1132 		 */
1133 		impl_ddi_sunbus_removechild(child);
1134 		return (DDI_FAILURE);
1135 	}
1136 	/*
1137 	 * Cannot merge node, permit pseudo children
1138 	 */
1139 	return (DDI_SUCCESS);
1140 }
1141 
1142 /*
1143  * called when ACPI enumeration is not used
1144  */
1145 static void
1146 add_known_used_resources(void)
1147 {
1148 	/* needs to be in increasing order */
1149 	int intr[] = {0x1, 0x3, 0x4, 0x6, 0x7, 0xc};
1150 	int dma[] = {0x2};
1151 	int io[] = {0x60, 0x1, 0x64, 0x1, 0x2f8, 0x8, 0x378, 0x8, 0x3f0, 0x10,
1152 	    0x778, 0x4};
1153 	dev_info_t *usedrdip;
1154 
1155 	usedrdip = ddi_find_devinfo(USED_RESOURCES, -1, 0);
1156 
1157 	if (usedrdip == NULL) {
1158 		(void) ndi_devi_alloc_sleep(ddi_root_node(), USED_RESOURCES,
1159 		    (pnode_t)DEVI_SID_NODEID, &usedrdip);
1160 	}
1161 
1162 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, usedrdip,
1163 	    "interrupts", (int *)intr, (int)(sizeof (intr) / sizeof (int)));
1164 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, usedrdip,
1165 	    "io-space", (int *)io, (int)(sizeof (io) / sizeof (int)));
1166 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, usedrdip,
1167 	    "dma-channels", (int *)dma, (int)(sizeof (dma) / sizeof (int)));
1168 	(void) ndi_devi_bind_driver(usedrdip, 0);
1169 
1170 }
1171 
1172 /*
1173  * Return non-zero if UART device exists.
1174  */
1175 static int
1176 uart_exists(ushort_t port)
1177 {
1178 	outb(port + COM_SCR, (char)0x5a);
1179 	outb(port + COM_ISR, (char)0x00);
1180 	return (inb(port + COM_SCR) == (char)0x5a);
1181 }
1182 
1183 static void
1184 isa_enumerate(int reprogram)
1185 {
1186 	int circ, i;
1187 	dev_info_t *xdip;
1188 	dev_info_t *isa_dip = ddi_find_devinfo("isa", -1, 0);
1189 
1190 	struct regspec i8042_regs[] = {
1191 		{1, 0x60, 0x1},
1192 		{1, 0x64, 0x1}
1193 	};
1194 	int i8042_intrs[] = {0x1, 0xc};
1195 	char *acpi_prop;
1196 	int acpi_enum = 1; /* ACPI is default to be on */
1197 #if defined(__xpv)
1198 	int cons, ttyn;
1199 
1200 	cons = console_hypervisor_dev_type(&ttyn);
1201 #endif
1202 	if (reprogram || !isa_dip)
1203 		return;
1204 
1205 	bzero(isa_extra_resource, MAX_EXTRA_RESOURCE * sizeof (struct regspec));
1206 
1207 	ndi_devi_enter(isa_dip, &circ);
1208 
1209 	/*
1210 	 * Check whether ACPI enumeration is disabled.
1211 	 *
1212 	 * Note this property may also be set if ACPI ISA enumeration has
1213 	 * failed, to communicate that to the i8042 nexus.
1214 	 */
1215 	if (ddi_prop_lookup_string(DDI_DEV_T_ANY, ddi_root_node(),
1216 	    DDI_PROP_DONTPASS, "acpi-enum", &acpi_prop) == DDI_PROP_SUCCESS) {
1217 		/* 0 == match == false */
1218 		acpi_enum = strcmp("off", acpi_prop);
1219 		ddi_prop_free(acpi_prop);
1220 	}
1221 
1222 	if (acpi_enum != 0) {
1223 		if (acpi_isa_device_enum(isa_dip)) {
1224 			ndi_devi_exit(isa_dip, circ);
1225 			if (isa_resource_setup() != NDI_SUCCESS) {
1226 				cmn_err(CE_WARN, "isa nexus: isa "
1227 				    "resource setup failed");
1228 			}
1229 
1230 			/* serial ports? */
1231 			enumerate_BIOS_serial(isa_dip);
1232 
1233 			/* adjust parallel port size  */
1234 			adjust_prtsz(isa_dip);
1235 
1236 			isa_create_ranges_prop(isa_dip);
1237 			return;
1238 		}
1239 		cmn_err(CE_NOTE, "!Solaris did not detect ACPI BIOS");
1240 	}
1241 	cmn_err(CE_NOTE, "!ACPI is off");
1242 
1243 	/* serial ports */
1244 	for (i = 0; i < min_BIOS_serial; i++) {
1245 		ushort_t addr = asy_regs[i].regspec_addr;
1246 		if (!uart_exists(addr))
1247 			continue;
1248 #if defined(__xpv)
1249 		if (cons == CONS_TTY && ttyn == i)
1250 			continue;
1251 #endif
1252 		ndi_devi_alloc_sleep(isa_dip, "asy",
1253 		    (pnode_t)DEVI_SID_NODEID, &xdip);
1254 		(void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
1255 		    "compatible", "pnpPNP,500");
1256 		(void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
1257 		    "model", "Standard PC COM port");
1258 		(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, xdip,
1259 		    "reg", (int *)&asy_regs[i], 3);
1260 		(void) ndi_prop_update_int(DDI_DEV_T_NONE, xdip,
1261 		    "interrupts", asy_intrs[i]);
1262 		(void) ndi_devi_bind_driver(xdip, 0);
1263 		/* Adjusting isa_extra here causes a kernel dump later. */
1264 	}
1265 
1266 	/* i8042 node */
1267 	ndi_devi_alloc_sleep(isa_dip, "i8042",
1268 	    (pnode_t)DEVI_SID_NODEID, &xdip);
1269 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, xdip,
1270 	    "reg", (int *)i8042_regs, 6);
1271 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, xdip,
1272 	    "interrupts", (int *)i8042_intrs, 2);
1273 	(void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
1274 	    "unit-address", "1,60");
1275 	(void) ndi_devi_bind_driver(xdip, 0);
1276 
1277 	add_known_used_resources();
1278 
1279 	ndi_devi_exit(isa_dip, circ);
1280 
1281 	isa_create_ranges_prop(isa_dip);
1282 }
1283 
1284 /*
1285  * On some machines, serial port 2 isn't listed in the ACPI table.
1286  * This function goes through the base I/O addresses and makes sure all
1287  * the serial ports there are in the dev_info tree.  If any are missing,
1288  * this function will add them.
1289  */
1290 static void
1291 enumerate_BIOS_serial(dev_info_t *isa_dip)
1292 {
1293 	int i;
1294 	dev_info_t *xdip;
1295 	int found;
1296 	int ret;
1297 	struct regspec *tmpregs;
1298 	int tmpregs_len;
1299 #if defined(__xpv)
1300 	int cons, ttyn;
1301 
1302 	cons = console_hypervisor_dev_type(&ttyn);
1303 #endif
1304 
1305 	/*
1306 	 * Scan the base I/O addresses of the first four serial ports.
1307 	 */
1308 	for (i = 0; i < num_BIOS_serial; i++) {
1309 		ushort_t addr = asy_regs[i].regspec_addr;
1310 
1311 		/* Look for it in the dev_info tree */
1312 		found = 0;
1313 		for (xdip = ddi_get_child(isa_dip); xdip != NULL;
1314 		    xdip = ddi_get_next_sibling(xdip)) {
1315 			if (strncmp(ddi_node_name(xdip), "asy", 3) != 0) {
1316 				/* skip non asy */
1317 				continue;
1318 			}
1319 
1320 			/* Match by addr */
1321 			ret = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, xdip,
1322 			    DDI_PROP_DONTPASS, "reg", (int **)&tmpregs,
1323 			    (uint_t *)&tmpregs_len);
1324 			if (ret != DDI_PROP_SUCCESS) {
1325 				/* error */
1326 				continue;
1327 			}
1328 
1329 			if (tmpregs->regspec_addr == addr)
1330 				found = 1;
1331 
1332 			/*
1333 			 * Free the memory allocated by
1334 			 * ddi_prop_lookup_int_array().
1335 			 */
1336 			ddi_prop_free(tmpregs);
1337 
1338 			if (found) {
1339 				if (asy_intr_override & 1<<i) {
1340 					(void) ndi_prop_update_int(
1341 					    DDI_DEV_T_NONE, xdip,
1342 					    "interrupts", asy_intrs[i]);
1343 				}
1344 
1345 				break;
1346 			}
1347 		}
1348 
1349 		/* If not found, then add it */
1350 		if (!found && uart_exists(addr)) {
1351 			ndi_devi_alloc_sleep(isa_dip, "asy",
1352 			    (pnode_t)DEVI_SID_NODEID, &xdip);
1353 			(void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
1354 			    "compatible", "pnpPNP,500");
1355 			(void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
1356 			    "model", "Standard PC COM port");
1357 			(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, xdip,
1358 			    "reg", (int *)&asy_regs[i], 3);
1359 			(void) ndi_prop_update_int(DDI_DEV_T_NONE, xdip,
1360 			    "interrupts", asy_intrs[i]);
1361 			(void) ndi_devi_bind_driver(xdip, 0);
1362 
1363 			ASSERT(isa_extra_count < MAX_EXTRA_RESOURCE);
1364 			bcopy(&asy_regs[i],
1365 			    isa_extra_resource + isa_extra_count,
1366 			    sizeof (struct regspec));
1367 			isa_extra_count++;
1368 		}
1369 	}
1370 
1371 	/*
1372 	 * An asy node may have been attached via ACPI enumeration, or
1373 	 * directly from this file.  Check each serial port to see if it
1374 	 * is in use by the hypervisor.  If it is in use, then remove
1375 	 * the node from the device tree.
1376 	 */
1377 #if defined(__xpv)
1378 	i = 0;
1379 
1380 	for (xdip = ddi_get_child(isa_dip); xdip != NULL; ) {
1381 		dev_info_t *curdip;
1382 
1383 		curdip = xdip;
1384 		xdip = ddi_get_next_sibling(xdip);
1385 
1386 		if (strncmp(ddi_node_name(curdip), "asy", 3) != 0)
1387 			continue;
1388 
1389 		if (cons == CONS_TTY && ttyn == i) {
1390 			ret = ndi_devi_free(curdip);
1391 			if (ret != DDI_SUCCESS) {
1392 				cmn_err(CE_WARN,
1393 				    "could not remove asy%d node", i);
1394 			}
1395 
1396 			cmn_err(CE_NOTE, "!asy%d unavailable, reserved"
1397 			    " to hypervisor", i);
1398 		}
1399 
1400 		i++;
1401 	}
1402 #endif
1403 
1404 }
1405 
1406 /*
1407  * Some machine comes with an illegal parallel port size of 3
1408  * bytes in ACPI, even parallel port mode is ECP.
1409  */
1410 #define	DEFAULT_PRT_SIZE	8
1411 static void
1412 adjust_prtsz(dev_info_t *isa_dip)
1413 {
1414 	dev_info_t *cdip;
1415 	struct regspec *regs_p, *extreg_p;
1416 	int regs_len, nreg, i;
1417 	char *name;
1418 
1419 	for (cdip = ddi_get_child(isa_dip); cdip != NULL;
1420 	    cdip = ddi_get_next_sibling(cdip)) {
1421 		name = ddi_node_name(cdip);
1422 		if ((strncmp(name, "lp", 2) != 0) || (strnlen(name, 3) != 2))
1423 			continue;	/* skip non parallel */
1424 
1425 		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, cdip,
1426 		    DDI_PROP_DONTPASS, "reg", (int **)&regs_p,
1427 		    (uint_t *)&regs_len) != DDI_PROP_SUCCESS)
1428 			continue;
1429 
1430 		nreg = regs_len / (sizeof (struct regspec) / sizeof (int));
1431 		for (i = 0; i < nreg; i++) {
1432 			if (regs_p[i].regspec_size == DEFAULT_PRT_SIZE)
1433 				continue;
1434 
1435 			ASSERT(isa_extra_count < MAX_EXTRA_RESOURCE);
1436 			extreg_p = &isa_extra_resource[isa_extra_count++];
1437 			extreg_p->regspec_bustype = ISA_ADDR_IO;
1438 			extreg_p->regspec_addr = regs_p[i].regspec_addr;
1439 			extreg_p->regspec_size = DEFAULT_PRT_SIZE;
1440 		}
1441 
1442 		ddi_prop_free(regs_p);
1443 	}
1444 }
1445