xref: /illumos-gate/usr/src/uts/i86pc/Makefile.files (revision 19397407)

#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#

#
# Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
#	This Makefile defines file modules in the directory uts/i86pc
#	and its children. These are the source files which are i86pc
#	"implementation architecture" dependent.
#

#
#	object lists
#
CORE_OBJS +=			\
	acpi_stubs.o		\
	biosdisk.o		\
	bios_call.o		\
	cbe.o			\
	cmi.o			\
	cmi_hw.o		\
	cms.o			\
	confunix.o		\
	cpuid.o			\
	cpuid_subr.o		\
	cpupm.o			\
	dis_tables.o		\
	ddi_impl.o		\
	dtrace_subr.o		\
	dvma.o			\
	fpu_subr.o		\
	fakebop.o		\
	fastboot.o		\
	fb_swtch.o		\
	graphics.o		\
	hardclk.o		\
	hat_i86.o		\
	hat_kdi.o		\
	hment.o			\
	hold_page.o		\
	hrtimers.o		\
	htable.o		\
	i86_mmu.o		\
	instr_size.o		\
	intr.o			\
	kboot_mmu.o		\
	kdi_subr.o		\
	kdi_idt.o		\
	kdi_idthdl.o		\
	kdi_asm.o		\
	lgrpplat.o		\
	mach_kdi.o		\
	mach_sysconfig.o	\
	machdep.o		\
	mem_config_stubs.o	\
	memnode.o		\
	microcode.o		\
	microfind.o		\
	mlsetup.o		\
	mp_call.o		\
	mp_implfuncs.o		\
	mp_machdep.o		\
	mp_pc.o			\
	mp_startup.o		\
	memscrub.o		\
	mpcore.o		\
	notes.o			\
	pci_bios.o		\
	pci_cfgspace.o		\
	pci_mech1.o		\
	pci_mech2.o		\
	pci_neptune.o		\
	pci_orion.o		\
	pmem.o			\
	ppage.o			\
	startup.o		\
	timestamp.o		\
	todpc_subr.o		\
	trap.o			\
	vm_machdep.o		\
	x_call.o

#
#	Add the SMBIOS subsystem object files directly to the list of objects
#	built into unix itself; this is all common code except for smb_dev.c.
#
CORE_OBJS += $(SMBIOS_OBJS)

#
# These get compiled twice:
# - once in the dboot (direct boot) identity mapped code
# - once for use during early startup in unix
#
BOOT_DRIVER_OBJS =		\
	boot_console.o		\
	boot_keyboard.o		\
	boot_keyboard_table.o	\
	boot_vga.o		\
	boot_mmu.o

CORE_OBJS += $(BOOT_DRIVER_OBJS)

#
#	locore.o is special. It must be the first file relocated so that it
#	it is relocated just where its name implies.
#
SPECIAL_OBJS_32 +=		\
	locore.o		\
	fast_trap_asm.o		\
	interrupt.o		\
	syscall_asm.o

SPECIAL_OBJS_64 +=		\
	locore.o		\
	fast_trap_asm.o		\
	interrupt.o		\
	syscall_asm_amd64.o

SPECIAL_OBJS += $(SPECIAL_OBJS_$(CLASS))

#
# Objects that get compiled into the identity mapped PT_LOAD section of unix
# to handle the earliest part of booting.
#
DBOOT_OBJS_32 =

DBOOT_OBJS_64 += dboot_elfload.o

DBOOT_OBJS +=			\
	dboot_asm.o		\
	dboot_grub.o		\
	dboot_printf.o		\
	dboot_startkern.o	\
	memcpy.o		\
	memset.o		\
	muldiv.o		\
	string.o		\
	$(BOOT_DRIVER_OBJS)	\
	$(DBOOT_OBJS_$(CLASS))

#
#			driver and misc modules
#
GFX_PRIVATE_OBJS	+= gfx_private.o gfxp_pci.o gfxp_segmap.o \
			   gfxp_devmap.o gfxp_vgatext.o gfxp_vm.o vgasubr.o
IOAT_OBJS += ioat.o ioat_rs.o ioat_ioctl.o ioat_chan.o
ISANEXUS_OBJS += isa.o dma_engine.o i8237A.o
PCI_E_MISC_OBJS += pcie.o pcie_fault.o
PCI_E_NEXUS_OBJS += npe.o npe_misc.o
PCI_E_NEXUS_OBJS += pci_common.o pci_kstats.o pci_tools.o
PCINEXUS_OBJS += pci.o pci_common.o pci_kstats.o pci_tools.o
PCPLUSMP_OBJS += apic.o apic_regops.o psm_common.o apic_introp.o mp_platform_common.o

ACPI_DRV_OBJS	+= acpi_drv.o

CPUDRV_OBJS	+= \
	cpudrv.o \
	cpudrv_amd.o \
	cpudrv_intel.o \
	cpudrv_mach.o \
	cpudrv_throttle.o \
	cpu_acpi.o \
	speedstep.o \
	pwrnow.o

PPM_OBJS	+= ppm_subr.o ppm.o ppm_plat.o

ACPIPPM_OBJS	+= acpippm.o acpisleep.o

ROOTNEX_OBJS += rootnex.o iommu_rscs.o dmar_acpi.o intel_iommu.o
TZMON_OBJS	+= tzmon.o
UPPC_OBJS += uppc.o psm_common.o
XSVC_OBJS += xsvc.o

#
#	Build up defines and paths.
#
ALL_DEFS	+= -Di86pc
INC_PATH	+= -I$(UTSBASE)/i86pc -I$(SRC)/common

#
# Since the assym files are derived, the dependencies must be explicit for
# all files including this file. (This is only actually required in the
# instance when the .nse_depinfo file does not exist.) It may seem that
# the lint targets should also have a similar dependency, but they don't
# since only C headers are included when #defined(__lint) is true.
#

ASSYM_DEPS      += 		\
	copy.o			\
	desctbls_asm.o		\
	ddi_i86_asm.o		\
	exception.o		\
	fast_trap_asm.o		\
	float.o			\
	i86_subr.o		\
	interrupt.o		\
	lock_prim.o		\
	locore.o		\
	mpcore.o		\
	sseblk.o		\
	swtch.o			\
	syscall_asm.o		\
	syscall_asm_amd64.o	\
	cpr_wakecode.o

CPR_IMPL_OBJS	= cpr_impl.o	cpr_wakecode.o

$(KDI_ASSYM_DEPS:%=$(OBJS_DIR)/%):	$(DSF_DIR)/$(OBJS_DIR)/kdi_assym.h

ASSYM_DEPS += kdi_asm.o