xref: /illumos-gate/usr/src/uts/common/io/xge/hal/xgehal/xgehal-device-fp.c (revision 8347601b)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 *
 * Copyright (c) 2002-2006 Neterion, Inc.
 */

#ifdef XGE_DEBUG_FP
#include "xgehal-device.h"
#endif

#include "xgehal-ring.h"
#include "xgehal-fifo.h"

/**
 * xge_hal_device_bar0 - Get BAR0 mapped address.
 * @hldev: HAL device handle.
 *
 * Returns:	BAR0 address of	the	specified device.
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	char *
xge_hal_device_bar0(xge_hal_device_t *hldev)
{
	return hldev->bar0;
}

/**
 * xge_hal_device_isrbar0 -	Get	BAR0 mapped	address.
 * @hldev: HAL device handle.
 *
 * Returns:	BAR0 address of	the	specified device.
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	char *
xge_hal_device_isrbar0(xge_hal_device_t	*hldev)
{
	return hldev->isrbar0;
}

/**
 * xge_hal_device_bar1 - Get BAR1 mapped address.
 * @hldev: HAL device handle.
 *
 * Returns:	BAR1 address of	the	specified device.
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	char *
xge_hal_device_bar1(xge_hal_device_t *hldev)
{
	return hldev->bar1;
}

/**
 * xge_hal_device_bar0_set - Set BAR0 mapped address.
 * @hldev: HAL device handle.
 * @bar0: BAR0 mapped address.
 * * Set BAR0 address in the HAL device	object.
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	void
xge_hal_device_bar0_set(xge_hal_device_t *hldev, char *bar0)
{
	xge_assert(bar0);
	hldev->bar0	= bar0;
}

/**
 * xge_hal_device_isrbar0_set -	Set	BAR0 mapped	address.
 * @hldev: HAL device handle.
 * @isrbar0: BAR0 mapped address.
 * * Set BAR0 address in the HAL device	object.
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	void
xge_hal_device_isrbar0_set(xge_hal_device_t	*hldev,	char *isrbar0)
{
	xge_assert(isrbar0);
	hldev->isrbar0 = isrbar0;
}

/**
 * xge_hal_device_bar1_set - Set BAR1 mapped address.
 * @hldev: HAL device handle.
 * @channelh: Channel handle.
 * @bar1: BAR1 mapped address.
 *
 * Set BAR1	address	for	the	given channel.
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	void
xge_hal_device_bar1_set(xge_hal_device_t *hldev, xge_hal_channel_h channelh,
			   char	*bar1)
{
	xge_hal_fifo_t *fifo = (xge_hal_fifo_t *)channelh;

	xge_assert(bar1);
	xge_assert(fifo);

	/* Initializing	the	BAR1 address as	the	start of
	 * the FIFO	queue pointer and as a location	of FIFO	control
	 * word. */
	fifo->hw_pair =
			(xge_hal_fifo_hw_pair_t	*) (bar1 +
				(fifo->channel.post_qid	* XGE_HAL_FIFO_HW_PAIR_OFFSET));
	hldev->bar1	= bar1;
}


/**
 * xge_hal_device_rev -	Get	Device revision	number.
 * @hldev: HAL device handle.
 *
 * Returns:	Device revision	number
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	int
xge_hal_device_rev(xge_hal_device_t	*hldev)
{
		return hldev->revision;
}


/**
 * xge_hal_device_begin_irq	- Begin	IRQ	processing.
 * @hldev: HAL device handle.
 * @reason:	"Reason" for the interrupt,	the	value of Xframe's
 *			general_int_status register.
 *
 * The function	performs two actions, It first checks whether (shared IRQ) the
 * interrupt was raised	by the device. Next, it	masks the device interrupts.
 *
 * Note:
 * xge_hal_device_begin_irq() does not flush MMIO writes through the
 * bridge. Therefore, two back-to-back interrupts are potentially possible.
 * It is the responsibility	of the ULD to make sure	that only one
 * xge_hal_device_continue_irq() runs at a time.
 *
 * Returns:	0, if the interrupt	is not "ours" (note	that in	this case the
 * device remain enabled).
 * Otherwise, xge_hal_device_begin_irq() returns 64bit general adapter
 * status.
 * See also: xge_hal_device_handle_irq()
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	xge_hal_status_e
xge_hal_device_begin_irq(xge_hal_device_t *hldev, u64 *reason)
{
	u64	val64;
	xge_hal_pci_bar0_t *isrbar0	= (xge_hal_pci_bar0_t *)hldev->isrbar0;

	hldev->stats.sw_dev_info_stats.total_intr_cnt++;

	val64 =	xge_os_pio_mem_read64(hldev->pdev,
				  hldev->regh0,	&isrbar0->general_int_status);
	if (xge_os_unlikely(!val64)) {
		/* not Xframe interrupt	*/
		hldev->stats.sw_dev_info_stats.not_traffic_intr_cnt++;
		*reason	= 0;
			return XGE_HAL_ERR_WRONG_IRQ;
	}

	if (xge_os_unlikely(val64 == XGE_HAL_ALL_FOXES)) {
				u64	adapter_status =
						xge_os_pio_mem_read64(hldev->pdev, hldev->regh0,
						  &isrbar0->adapter_status);
				if (adapter_status == XGE_HAL_ALL_FOXES)  {
					(void) xge_queue_produce(hldev->queueh,
						 XGE_HAL_EVENT_SLOT_FREEZE,
						 hldev,
						 1,	 /*	critical: slot freeze */
						 sizeof(u64),
						 (void*)&adapter_status);
			*reason	= 0;
			return XGE_HAL_ERR_CRITICAL;
		}
	}

	*reason	= val64;

	/* separate	fast path, i.e.	no errors */
	if (val64 &	XGE_HAL_GEN_INTR_RXTRAFFIC)	{
		hldev->stats.sw_dev_info_stats.rx_traffic_intr_cnt++;
		return XGE_HAL_OK;
	}
	if (val64 &	XGE_HAL_GEN_INTR_TXTRAFFIC)	{
		hldev->stats.sw_dev_info_stats.tx_traffic_intr_cnt++;
		return XGE_HAL_OK;
	}

	hldev->stats.sw_dev_info_stats.not_traffic_intr_cnt++;
	if (xge_os_unlikely(val64 &	XGE_HAL_GEN_INTR_TXPIC)) {
		xge_hal_status_e status;
		hldev->stats.sw_dev_info_stats.txpic_intr_cnt++;
		status = __hal_device_handle_txpic(hldev, val64);
		if (status != XGE_HAL_OK) {
			return status;
		}
	}

	if (xge_os_unlikely(val64 &	XGE_HAL_GEN_INTR_TXDMA)) {
		xge_hal_status_e status;
		hldev->stats.sw_dev_info_stats.txdma_intr_cnt++;
		status = __hal_device_handle_txdma(hldev, val64);
		if (status != XGE_HAL_OK) {
			return status;
		}
	}

	if (xge_os_unlikely(val64 &	XGE_HAL_GEN_INTR_TXMAC)) {
		xge_hal_status_e status;
		hldev->stats.sw_dev_info_stats.txmac_intr_cnt++;
		status = __hal_device_handle_txmac(hldev, val64);
		if (status != XGE_HAL_OK) {
			return status;
		}
	}

	if (xge_os_unlikely(val64 &	XGE_HAL_GEN_INTR_TXXGXS)) {
		xge_hal_status_e status;
		hldev->stats.sw_dev_info_stats.txxgxs_intr_cnt++;
		status = __hal_device_handle_txxgxs(hldev, val64);
		if (status != XGE_HAL_OK) {
			return status;
		}
	}

	if (xge_os_unlikely(val64 &	XGE_HAL_GEN_INTR_RXPIC)) {
		xge_hal_status_e status;
		hldev->stats.sw_dev_info_stats.rxpic_intr_cnt++;
		status = __hal_device_handle_rxpic(hldev, val64);
		if (status != XGE_HAL_OK) {
			return status;
		}
	}

	if (xge_os_unlikely(val64 &	XGE_HAL_GEN_INTR_RXDMA)) {
		xge_hal_status_e status;
		hldev->stats.sw_dev_info_stats.rxdma_intr_cnt++;
		status = __hal_device_handle_rxdma(hldev, val64);
		if (status != XGE_HAL_OK) {
			return status;
		}
	}

	if (xge_os_unlikely(val64 &	XGE_HAL_GEN_INTR_RXMAC)) {
		xge_hal_status_e status;
		hldev->stats.sw_dev_info_stats.rxmac_intr_cnt++;
		status = __hal_device_handle_rxmac(hldev, val64);
		if (status != XGE_HAL_OK) {
			return status;
		}
	}

	if (xge_os_unlikely(val64 &	XGE_HAL_GEN_INTR_RXXGXS)) {
		xge_hal_status_e status;
		hldev->stats.sw_dev_info_stats.rxxgxs_intr_cnt++;
		status = __hal_device_handle_rxxgxs(hldev, val64);
		if (status != XGE_HAL_OK) {
			return status;
		}
	}

	if (xge_os_unlikely(val64 &	XGE_HAL_GEN_INTR_MC)) {
		xge_hal_status_e status;
		hldev->stats.sw_dev_info_stats.mc_intr_cnt++;
		status = __hal_device_handle_mc(hldev, val64);
		if (status != XGE_HAL_OK) {
			return status;
		}
	}

	return XGE_HAL_OK;
}

/**
 * xge_hal_device_clear_rx - Acknowledge (that is, clear) the
 * condition that has caused the RX	interrupt.
 * @hldev: HAL device handle.
 *
 * Acknowledge (that is, clear)	the	condition that has caused
 * the Rx interrupt.
 * See also: xge_hal_device_begin_irq(), xge_hal_device_continue_irq(),
 * xge_hal_device_clear_tx(), xge_hal_device_mask_rx().
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	void
xge_hal_device_clear_rx(xge_hal_device_t *hldev)
{
	xge_hal_pci_bar0_t *isrbar0	= (xge_hal_pci_bar0_t *)hldev->isrbar0;

	xge_os_pio_mem_write64(hldev->pdev,	hldev->regh0,
				 0xFFFFFFFFFFFFFFFFULL,
				 &isrbar0->rx_traffic_int);
}

/**
 * xge_hal_device_clear_tx - Acknowledge (that is, clear) the
 * condition that has caused the TX	interrupt.
 * @hldev: HAL device handle.
 *
 * Acknowledge (that is, clear)	the	condition that has caused
 * the Tx interrupt.
 * See also: xge_hal_device_begin_irq(), xge_hal_device_continue_irq(),
 * xge_hal_device_clear_rx(), xge_hal_device_mask_tx().
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	void
xge_hal_device_clear_tx(xge_hal_device_t *hldev)
{
	xge_hal_pci_bar0_t *isrbar0	= (xge_hal_pci_bar0_t *)hldev->isrbar0;

	xge_os_pio_mem_write64(hldev->pdev,	hldev->regh0,
				 0xFFFFFFFFFFFFFFFFULL,
				 &isrbar0->tx_traffic_int);
}

/**
 * xge_hal_device_poll_rx_channel -	Poll Rx	channel	for	completed
 * descriptors and process the same.
 * @channel: HAL channel.
 *
 * The function	polls the Rx channel for the completed	descriptors	and	calls
 * the upper-layer driver (ULD)	via	supplied completion	callback.
 *
 * Returns:	XGE_HAL_OK,	if the polling is completed	successful.
 * XGE_HAL_COMPLETIONS_REMAIN: There are still more	completed
 * descriptors available which are yet to be processed.
 *
 * See also: xge_hal_device_poll_tx_channel()
 */
__HAL_STATIC_DEVICE __HAL_INLINE_DEVICE	xge_hal_status_e
xge_hal_device_poll_rx_channel(xge_hal_channel_t *channel, int *got_rx)
{
	xge_hal_status_e ret = XGE_HAL_OK;
	xge_hal_dtr_h first_dtrh;
	xge_hal_device_t *hldev = (xge_hal_device_t *)channel->devh;
	u8 t_code;
	int got_bytes;

	/* for each opened rx channel */
	got_bytes = *got_rx = 0;
	((xge_hal_ring_t *)channel)->cmpl_cnt = 0;
	channel->poll_bytes = 0;
	if ((ret = xge_hal_ring_dtr_next_completed (channel, &first_dtrh,
		&t_code)) == XGE_HAL_OK) {
		if (channel->callback(channel, first_dtrh,
			t_code,	channel->userdata) != XGE_HAL_OK) {
			(*got_rx) += ((xge_hal_ring_t *)channel)->cmpl_cnt + 1;
			got_bytes += channel->poll_bytes + 1;
			ret = XGE_HAL_COMPLETIONS_REMAIN;
		} else {
			(*got_rx) += ((xge_hal_ring_t *)channel)->cmpl_cnt + 1;
			got_bytes += channel->poll_bytes + 1;
		}
	}

	if (*got_rx) {
		hldev->irq_workload_rxd[channel->post_qid] += *got_rx;
		hldev->irq_workload_rxcnt[channel->post_qid] ++;
	}
	hldev->irq_workload_rxlen[channel->post_qid] += got_bytes;

	return ret;
}

/**
 * xge_hal_device_poll_tx_channel -	Poll Tx	channel	for	completed
 * descriptors and process the same.
 * @hldev: HAL channel.
 *
 * The function	polls the Tx channel for the completed	descriptors	and	calls
 * the upper-layer driver (ULD)	via	supplied completion	callback.
 *
 * Returns:	XGE_HAL_OK,	if the polling is completed	successful.
 * XGE_HAL_COMPLETIONS_REMAIN: There are still more	completed
 * descriptors available which are yet to be processed.
 *
 * See also: xge_hal_device_poll_rx_channel().
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE xge_hal_status_e
xge_hal_device_poll_tx_channel(xge_hal_channel_t *channel, int *got_tx)
{
	xge_hal_dtr_h first_dtrh;
	xge_hal_device_t *hldev = (xge_hal_device_t *)channel->devh;
	u8 t_code;
	int got_bytes;

	/* for each opened tx channel */
	got_bytes = *got_tx = 0;
	channel->poll_bytes = 0;
	if (xge_hal_fifo_dtr_next_completed (channel, &first_dtrh,
		&t_code) ==	XGE_HAL_OK)	{
		if (channel->callback(channel, first_dtrh,
			t_code,	channel->userdata) != XGE_HAL_OK) {
			(*got_tx)++;
			got_bytes += channel->poll_bytes + 1;
			return XGE_HAL_COMPLETIONS_REMAIN;
		}
		(*got_tx)++;
		got_bytes += channel->poll_bytes + 1;
	}

	if (*got_tx) {
		hldev->irq_workload_txd[channel->post_qid] += *got_tx;
		hldev->irq_workload_txcnt[channel->post_qid] ++;
	}
	hldev->irq_workload_txlen[channel->post_qid] += got_bytes;

	return XGE_HAL_OK;
}

/**
 * xge_hal_device_poll_rx_channels - Poll Rx channels for completed
 * descriptors and process the same.
 * @hldev: HAL device handle.
 *
 * The function	polls the Rx channels for the completed	descriptors	and	calls
 * the upper-layer driver (ULD)	via	supplied completion	callback.
 *
 * Returns:	XGE_HAL_OK,	if the polling is completed	successful.
 * XGE_HAL_COMPLETIONS_REMAIN: There are still more	completed
 * descriptors available which are yet to be processed.
 *
 * See also: xge_hal_device_poll_tx_channels(),	xge_hal_device_continue_irq().
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	xge_hal_status_e
xge_hal_device_poll_rx_channels(xge_hal_device_t *hldev, int *got_rx)
{
	xge_list_t *item;
	xge_hal_channel_t *channel;

	/* for each opened rx channel */
	xge_list_for_each(item,	&hldev->ring_channels) {
		if (hldev->terminating)
			return XGE_HAL_OK;
		channel	= xge_container_of(item, xge_hal_channel_t,	item);
		(void) xge_hal_device_poll_rx_channel(channel, got_rx);
	}

	return XGE_HAL_OK;
}

/**
 * xge_hal_device_poll_tx_channels - Poll Tx channels for completed
 * descriptors and process the same.
 * @hldev: HAL device handle.
 *
 * The function	polls the Tx channels for the completed	descriptors	and	calls
 * the upper-layer driver (ULD)	via	supplied completion	callback.
 *
 * Returns:	XGE_HAL_OK,	if the polling is completed	successful.
 * XGE_HAL_COMPLETIONS_REMAIN: There are still more	completed
 * descriptors available which are yet to be processed.
 *
 * See also: xge_hal_device_poll_rx_channels(),	xge_hal_device_continue_irq().
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	xge_hal_status_e
xge_hal_device_poll_tx_channels(xge_hal_device_t *hldev, int *got_tx)
{
	xge_list_t *item;
	xge_hal_channel_t *channel;

	/* for each opened tx channel */
	xge_list_for_each(item,	&hldev->fifo_channels) {
		if (hldev->terminating)
			return XGE_HAL_OK;
		channel	= xge_container_of(item, xge_hal_channel_t, item);
		(void) xge_hal_device_poll_tx_channel(channel, got_tx);
	}

	return XGE_HAL_OK;
}

/**
 * xge_hal_device_mask_tx -	Mask Tx	interrupts.
 * @hldev: HAL device handle.
 *
 * Mask	Tx device interrupts.
 *
 * See also: xge_hal_device_unmask_tx(), xge_hal_device_mask_rx(),
 * xge_hal_device_clear_tx().
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	void
xge_hal_device_mask_tx(xge_hal_device_t	*hldev)
{
	xge_hal_pci_bar0_t *isrbar0	= (xge_hal_pci_bar0_t *)hldev->isrbar0;

	xge_os_pio_mem_write64(hldev->pdev,	hldev->regh0,
				   0xFFFFFFFFFFFFFFFFULL,
				   &isrbar0->tx_traffic_mask);
}

/**
 * xge_hal_device_mask_rx -	Mask Rx	interrupts.
 * @hldev: HAL device handle.
 *
 * Mask	Rx device interrupts.
 *
 * See also: xge_hal_device_unmask_rx(), xge_hal_device_mask_tx(),
 * xge_hal_device_clear_rx().
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	void
xge_hal_device_mask_rx(xge_hal_device_t	*hldev)
{
	xge_hal_pci_bar0_t *isrbar0	= (xge_hal_pci_bar0_t *)hldev->isrbar0;

	xge_os_pio_mem_write64(hldev->pdev,	hldev->regh0,
				   0xFFFFFFFFFFFFFFFFULL,
				   &isrbar0->rx_traffic_mask);
}

/**
 * xge_hal_device_mask_all - Mask all device interrupts.
 * @hldev: HAL device handle.
 *
 * Mask	all	device interrupts.
 *
 * See also: xge_hal_device_unmask_all()
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	void
xge_hal_device_mask_all(xge_hal_device_t *hldev)
{
	xge_hal_pci_bar0_t *isrbar0	= (xge_hal_pci_bar0_t *)hldev->isrbar0;

	xge_os_pio_mem_write64(hldev->pdev,	hldev->regh0,
				   0xFFFFFFFFFFFFFFFFULL,
				   &isrbar0->general_int_mask);
}

/**
 * xge_hal_device_unmask_tx	- Unmask Tx	interrupts.
 * @hldev: HAL device handle.
 *
 * Unmask Tx device	interrupts.
 *
 * See also: xge_hal_device_mask_tx(), xge_hal_device_clear_tx().
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	void
xge_hal_device_unmask_tx(xge_hal_device_t *hldev)
{
	xge_hal_pci_bar0_t *isrbar0	= (xge_hal_pci_bar0_t *)hldev->isrbar0;

	xge_os_pio_mem_write64(hldev->pdev,	hldev->regh0,
				   0x0ULL,
				   &isrbar0->tx_traffic_mask);
}

/**
 * xge_hal_device_unmask_rx	- Unmask Rx	interrupts.
 * @hldev: HAL device handle.
 *
 * Unmask Rx device	interrupts.
 *
 * See also: xge_hal_device_mask_rx(), xge_hal_device_clear_rx().
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	void
xge_hal_device_unmask_rx(xge_hal_device_t *hldev)
{
	xge_hal_pci_bar0_t *isrbar0	= (xge_hal_pci_bar0_t *)hldev->isrbar0;

	xge_os_pio_mem_write64(hldev->pdev,	hldev->regh0,
				   0x0ULL,
				   &isrbar0->rx_traffic_mask);
}

/**
 * xge_hal_device_unmask_all - Unmask all device interrupts.
 * @hldev: HAL device handle.
 *
 * Unmask all device interrupts.
 *
 * See also: xge_hal_device_mask_all()
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	void
xge_hal_device_unmask_all(xge_hal_device_t *hldev)
{
	xge_hal_pci_bar0_t *isrbar0	= (xge_hal_pci_bar0_t *)hldev->isrbar0;

	xge_os_pio_mem_write64(hldev->pdev,	hldev->regh0,
				   0x0ULL,
				   &isrbar0->general_int_mask);
}


/**
 * xge_hal_device_continue_irq - Continue handling IRQ:	process	all
 * completed descriptors.
 * @hldev: HAL device handle.
 *
 * Process completed descriptors and unmask	the	device interrupts.
 *
 * The xge_hal_device_continue_irq() walks all open	channels
 * and calls upper-layer driver	(ULD) via supplied completion
 * callback. Note that the completion callback is specified	at channel open
 * time, see xge_hal_channel_open().
 *
 * Note	that the xge_hal_device_continue_irq is	part of	the	_fast_ path.
 * To optimize the processing, the function	does _not_ check for
 * errors and alarms.
 *
 * The latter is done in a polling fashion,	via	xge_hal_device_poll().
 *
 * Returns:	XGE_HAL_OK.
 *
 * See also: xge_hal_device_handle_irq(), xge_hal_device_poll(),
 * xge_hal_ring_dtr_next_completed(),
 * xge_hal_fifo_dtr_next_completed(), xge_hal_channel_callback_f{}.
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	xge_hal_status_e
xge_hal_device_continue_irq(xge_hal_device_t *hldev)
{
	int	got_rx = 1,	got_tx = 1;
	int	isr_polling_cnt	= hldev->config.isr_polling_cnt;
	int	count =	0;

	do
	{
		if (got_rx)
			(void) xge_hal_device_poll_rx_channels(hldev, &got_rx);
		if (got_tx && hldev->tti_enabled)
			(void) xge_hal_device_poll_tx_channels(hldev, &got_tx);

		if (!got_rx && !got_tx)
			break;

		count += (got_rx + got_tx);
	}while (isr_polling_cnt--);

	if (!count)
		hldev->stats.sw_dev_info_stats.not_traffic_intr_cnt++;

	return XGE_HAL_OK;
}

/**
 * xge_hal_device_handle_irq - Handle device IRQ.
 * @hldev: HAL device handle.
 *
 * Perform the complete	handling of	the	line interrupt.	The	function
 * performs	two	calls.
 * First it	uses xge_hal_device_begin_irq()	to	check the reason for
 * the interrupt and mask the device interrupts.
 * Second, it calls	xge_hal_device_continue_irq() to process all
 * completed descriptors and re-enable the interrupts.
 *
 * Returns:	XGE_HAL_OK - success;
 * XGE_HAL_ERR_WRONG_IRQ - (shared)	IRQ	produced by	other device.
 *
 * See also: xge_hal_device_begin_irq(), xge_hal_device_continue_irq().
 */
__HAL_STATIC_DEVICE	__HAL_INLINE_DEVICE	xge_hal_status_e
xge_hal_device_handle_irq(xge_hal_device_t *hldev)
{
	u64	reason;
	xge_hal_status_e status;

	xge_hal_device_mask_all(hldev);

	status = xge_hal_device_begin_irq(hldev, &reason);
	if (status != XGE_HAL_OK) {
		xge_hal_device_unmask_all(hldev);
		return status;
	}

	if (reason & XGE_HAL_GEN_INTR_RXTRAFFIC) {
		xge_hal_device_clear_rx(hldev);
	}

	status = xge_hal_device_continue_irq(hldev);

	xge_hal_device_clear_tx(hldev);

	xge_hal_device_unmask_all(hldev);

	return status;
}

#if	defined(XGE_HAL_CONFIG_LRO)


__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL int
__hal_lro_check_for_session_match(lro_t	*lro, tcplro_t *tcp, iplro_t *ip)
{

	/* Match Source	address	field */
	if ((lro->ip_hdr->saddr	!= ip->saddr))
		return XGE_HAL_FAIL;

	/* Match Destination address field */
	if ((lro->ip_hdr->daddr	!= ip->daddr))
		return XGE_HAL_FAIL;

	/* Match Source	Port field */
	if ((lro->tcp_hdr->source != tcp->source))
		return XGE_HAL_FAIL;

	/* Match Destination Port field	*/
	if ((lro->tcp_hdr->dest	!= tcp->dest))
		return XGE_HAL_FAIL;

	return XGE_HAL_OK;
}

/*
 * __hal_tcp_seg_len: Find the tcp seg len.
 * @ip:	ip header.
 * @tcp: tcp header.
 * returns:	Tcp	seg	length.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL u16
__hal_tcp_seg_len(iplro_t *ip, tcplro_t	*tcp)
{
	u16	ret;

	ret	=  (xge_os_ntohs(ip->tot_len) -
		   ((ip->version_ihl & 0x0F)<<2) -
		   ((tcp->doff_res)>>2));
	return (ret);
}

/*
 * __hal_ip_lro_capable: Finds whether ip is lro capable.
 * @ip:	ip header.
 * @ext_info:  descriptor info.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL xge_hal_status_e
__hal_ip_lro_capable(iplro_t *ip,
			 xge_hal_dtr_info_t	*ext_info)
{

#ifdef XGE_LL_DEBUG_DUMP_PKT
		{
			u16	i;
			u8 ch, *iph	= (u8 *)ip;

			xge_debug_ring(XGE_TRACE, "Dump	Ip:" );
			for	(i =0; i < 40; i++)	{
				ch = ntohs(*((u8 *)(iph	+ i)) );
				printf("i:%d %02x, ",i,ch);
			}
		}
#endif

	if (ip->version_ihl	!= IP_FAST_PATH_HDR_MASK) {
		xge_debug_ring(XGE_ERR,	"iphdr !=45	:%d",ip->version_ihl);
		return XGE_HAL_FAIL;
	}

	if (ext_info->proto	& XGE_HAL_FRAME_PROTO_IP_FRAGMENTED) {
		xge_debug_ring(XGE_ERR,	"IP	fragmented");
		return XGE_HAL_FAIL;
	}

	return XGE_HAL_OK;
}

/*
 * __hal_tcp_lro_capable: Finds	whether	tcp	is lro capable.
 * @ip:	ip header.
 * @tcp: tcp header.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL xge_hal_status_e
__hal_tcp_lro_capable(iplro_t *ip, tcplro_t	*tcp, lro_t	*lro, int *ts_off)
{
#ifdef XGE_LL_DEBUG_DUMP_PKT
		{
			u8 ch;
			u16	i;

			xge_debug_ring(XGE_TRACE, "Dump	Tcp:" );
			for	(i =0; i < 20; i++)	{
				ch = ntohs(*((u8 *)((u8	*)tcp +	i))	);
				xge_os_printf("i:%d	%02x, ",i,ch);
			}
		}
#endif
	if ((TCP_FAST_PATH_HDR_MASK2 !=	tcp->ctrl) &&
		(TCP_FAST_PATH_HDR_MASK3 !=	tcp->ctrl))
		goto _exit_fail;

	*ts_off	= -1;
	if (TCP_FAST_PATH_HDR_MASK1	!= tcp->doff_res) {
		u16	tcp_hdr_len	= tcp->doff_res	>> 2; /* TCP header	len	*/
		u16	off	= 20; /* Start of tcp options */
		int	i, diff;

		/* Does	Packet can contain time	stamp */
		if (tcp_hdr_len	< 32) {
			/*
			 * If the session is not opened, we	can	consider
			 * this	packet for LRO
			 */
			if (lro	== NULL)
				return XGE_HAL_OK;

			goto _exit_fail;
		}

		/* Ignore No-operation 0x1 */
		while (((u8	*)tcp)[off]	== 0x1)
			off++;

		/* Next	option == Timestamp	*/
		if (((u8 *)tcp)[off] !=	0x8) {
			/*
			 * If the session ie not opened, we	can	consider
			 * this	packet for LRO
			 */
			if (lro	== NULL)
				return XGE_HAL_OK;

			goto _exit_fail;
		}

		*ts_off	= off;
		if (lro	== NULL)
			return XGE_HAL_OK;

		/*
		 * Now the session is opened. If the LRO frame doesn't
		 * have	time stamp,	we cannot consider current packet for
		 * LRO.
		 */
		if (lro->ts_off	== -1) {
			xge_debug_ring(XGE_ERR,	"Pkt received with time	stamp after	session	opened with	no time	stamp :	%02x %02x\n", tcp->doff_res, tcp->ctrl);
			return XGE_HAL_FAIL;
		}

		/*
		 * If the difference is	greater	than three,	then there are
		 * more	options	possible.
		 * else, there are two cases:
		 * case	1: remaining are padding bytes.
		 * case	2: remaining can contain options or	padding
		 */
		off	+= ((u8	*)tcp)[off+1];
		diff = tcp_hdr_len - off;
		if (diff > 3) {
			/*
			 * Probably	contains more options.
			 */
			xge_debug_ring(XGE_ERR,	"tcphdr	not	fastpth	: pkt received with	tcp	options	in addition	to time	stamp after	the	session	is opened %02x %02x	\n", tcp->doff_res,	tcp->ctrl);
			return XGE_HAL_FAIL;
		}

		for	(i = 0;	i <	diff; i++) {
			u8 byte	= ((u8 *)tcp)[off+i];

			/* Ignore No-operation 0x1 */
			if ((byte == 0x0) || (byte == 0x1))
				continue;
			xge_debug_ring(XGE_ERR,	"tcphdr	not	fastpth	: pkt received with	tcp	options	in addition	to time	stamp after	the	session	is opened %02x %02x	\n", tcp->doff_res,	tcp->ctrl);
			return XGE_HAL_FAIL;
		}

		/*
		 * Update the time stamp of	LRO	frame.
		 */
		xge_os_memcpy(((char *)lro->tcp_hdr	+ lro->ts_off +	2),
				(char *)((char *)tcp + (*ts_off) + 2), 8);
	}

	return XGE_HAL_OK;

_exit_fail:
	xge_debug_ring(XGE_ERR,	"tcphdr	not	fastpth	%02x %02x\n", tcp->doff_res, tcp->ctrl);
	return XGE_HAL_FAIL;

}

/*
 * __hal_lro_capable: Finds	whether	frame is lro capable.
 * @buffer:	Ethernet frame.
 * @ip:	ip frame.
 * @tcp: tcp frame.
 * @ext_info: Descriptor info.
 * @hldev: Hal context.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL xge_hal_status_e
__hal_lro_capable( u8 *buffer,
		   iplro_t **ip,
		   tcplro_t	**tcp,
		   xge_hal_dtr_info_t *ext_info,
		   xge_hal_device_t	*hldev)
{
	u8 ip_off, ip_length;

	if (!(ext_info->proto &	XGE_HAL_FRAME_PROTO_TCP)) {
		xge_debug_ring(XGE_ERR,	"Cant do lro %d", ext_info->proto);
		return XGE_HAL_FAIL;
	}
#ifdef XGE_LL_DEBUG_DUMP_PKT
		{
			u8 ch;
			u16	i;

			xge_os_printf("Dump	Eth:" );
			for	(i =0; i < 60; i++)	{
				ch = ntohs(*((u8 *)(buffer + i)) );
				xge_os_printf("i:%d	%02x, ",i,ch);
			}
		}
#endif

	switch (ext_info->frame) {
	case XGE_HAL_FRAME_TYPE_DIX:
		ip_off = XGE_HAL_HEADER_ETHERNET_II_802_3_SIZE;
		break;
	case XGE_HAL_FRAME_TYPE_LLC:
		ip_off = (XGE_HAL_HEADER_ETHERNET_II_802_3_SIZE	+
			  XGE_HAL_HEADER_802_2_SIZE);
		break;
	case XGE_HAL_FRAME_TYPE_SNAP:
		ip_off = (XGE_HAL_HEADER_ETHERNET_II_802_3_SIZE	+
			  XGE_HAL_HEADER_SNAP_SIZE);
		break;
	default: //	XGE_HAL_FRAME_TYPE_IPX,	etc.
		return XGE_HAL_FAIL;
	}


	if (ext_info->proto	& XGE_HAL_FRAME_PROTO_VLAN_TAGGED) {
		ip_off += XGE_HAL_HEADER_VLAN_SIZE;
	}

	/* Grab	ip,	tcp	headers	*/
	*ip	= (iplro_t *)((char*)buffer	+ ip_off);

	ip_length =	(u8)((*ip)->version_ihl	& 0x0F);
	ip_length =	ip_length <<2;
	*tcp = (tcplro_t *)((unsigned long)*ip + ip_length);

	xge_debug_ring(XGE_TRACE, "ip_length:%d	ip:"XGE_OS_LLXFMT
		   " tcp:"XGE_OS_LLXFMT"", (int)ip_length,
		(unsigned long long)(long)*ip, (unsigned long long)(long)*tcp);

	return XGE_HAL_OK;

}


/*
 * __hal_open_lro_session: Open	a new LRO session.
 * @buffer:	Ethernet frame.
 * @ip:	ip header.
 * @tcp: tcp header.
 * @lro: lro pointer
 * @ext_info: Descriptor info.
 * @hldev: Hal context.
 * @slot: Bucket no.
 * @tcp_seg_len: Length	of tcp segment.
 * @ts_off:	time stamp offset in the packet.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL void
__hal_open_lro_session (u8 *buffer,	iplro_t	*ip, tcplro_t *tcp,	lro_t **lro,
			xge_hal_device_t *hldev, int slot, u32 tcp_seg_len,
			int	ts_off)
{

	lro_t *lro_new = &hldev->lro_pool[slot];

	lro_new->in_use			=	1;
	lro_new->ll_hdr			=	buffer;
	lro_new->ip_hdr			=	ip;
	lro_new->tcp_hdr		=	tcp;
	lro_new->tcp_next_seq_num	=	tcp_seg_len	+ xge_os_ntohl(
								tcp->seq);
	lro_new->tcp_seq_num		=	tcp->seq;
	lro_new->tcp_ack_num		=	tcp->ack_seq;
	lro_new->sg_num			=	1;
	lro_new->total_length		=	xge_os_ntohs(ip->tot_len);
	lro_new->frags_len		=	0;
	lro_new->ts_off			=	ts_off;

	hldev->stats.sw_dev_info_stats.tot_frms_lroised++;
	hldev->stats.sw_dev_info_stats.tot_lro_sessions++;

	*lro = hldev->lro_recent = lro_new;
	return;
}

/*
 * __hal_lro_get_free_slot:	Get	a free LRO bucket.
 * @hldev: Hal context.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL int
__hal_lro_get_free_slot	(xge_hal_device_t *hldev)
{
	int	i;

	for	(i = 0;	i <	XGE_HAL_LRO_MAX_BUCKETS; i++) {
		lro_t *lro_temp	= &hldev->lro_pool[i];

		if (!lro_temp->in_use)
			return i;
	}
	return -1;
}

/*
 * __hal_get_lro_session: Gets matching	LRO	session	or creates one.
 * @buffer:	Ethernet frame.
 * @ip:	ip header.
 * @tcp: tcp header.
 * @lro: lro pointer
 * @ext_info: Descriptor info.
 * @hldev: Hal context.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL xge_hal_status_e
__hal_get_lro_session (u8 *buffer,
			   iplro_t *ip,
			   tcplro_t	*tcp,
			   lro_t **lro,
			   xge_hal_dtr_info_t *ext_info,
			   xge_hal_device_t	*hldev,
			   lro_t **lro_end3	/* Valid only when ret=END_3 */)
{
	lro_t *lro_match;
	int	i, free_slot = -1;
	u32	tcp_seg_len;
	int	ts_off = -1;

	*lro = lro_match = NULL;
	/*
	 * Compare the incoming	frame with the lro session left	from the
	 * previous	call.  There is	a good chance that this	incoming frame
	 * matches the lro session.
	 */
	if (hldev->lro_recent && hldev->lro_recent->in_use)	{
		if (__hal_lro_check_for_session_match(hldev->lro_recent,
							  tcp, ip)
							== XGE_HAL_OK)
			lro_match =	hldev->lro_recent;
	}

	if (!lro_match)	{
		/*
		 * Search in the pool of LROs for the session that matches
		 * the incoming	frame.
		 */
		for	(i = 0;	i <	XGE_HAL_LRO_MAX_BUCKETS; i++) {
			lro_t *lro_temp	= &hldev->lro_pool[i];

			if (!lro_temp->in_use) {
				if (free_slot == -1)
					free_slot =	i;
				continue;
			}

			if (__hal_lro_check_for_session_match(lro_temp,	tcp,
							  ip) == XGE_HAL_OK) {
				lro_match =	lro_temp;
				break;
			}
		}
	}


	if (lro_match) {
		/*
		 * Matching	LRO	Session	found
		 */
		*lro = lro_match;

		if (lro_match->tcp_next_seq_num	!= xge_os_ntohl(tcp->seq)) {
			xge_debug_ring(XGE_ERR,	"**retransmit  **"
						"found***");
			hldev->stats.sw_dev_info_stats.lro_out_of_seq_pkt_cnt++;
			return XGE_HAL_INF_LRO_END_2;
		}

		if (XGE_HAL_OK != __hal_ip_lro_capable(ip, ext_info))
			return XGE_HAL_INF_LRO_END_2;

		if (XGE_HAL_OK != __hal_tcp_lro_capable(ip,	tcp, lro_match,
							&ts_off)) {
			/*
			 * Close the current session and open a	new
			 * LRO session with	this packet,
			 * provided	it has tcp payload
			 */
			tcp_seg_len	= __hal_tcp_seg_len(ip,	tcp);
			if (tcp_seg_len	== 0)
				return XGE_HAL_INF_LRO_END_2;

			/* Get a free bucket  */
			free_slot =	__hal_lro_get_free_slot(hldev);
			if (free_slot == -1)
				return XGE_HAL_INF_LRO_END_2;

			/*
			 * Open	a new LRO session
			 */
			__hal_open_lro_session (buffer,	ip,	tcp, lro_end3,
						hldev, free_slot, tcp_seg_len,
						ts_off);

			return XGE_HAL_INF_LRO_END_3;
		}

				/*
		 * The frame is	good, in-sequence, can be LRO-ed;
		 * take	its	(latest) ACK - unless it is	a dupack.
		 * Note: to	be exact need to check window size as well..
		*/
		if (lro_match->tcp_ack_num == tcp->ack_seq &&
			lro_match->tcp_seq_num == tcp->seq)	{
			hldev->stats.sw_dev_info_stats.lro_dup_pkt_cnt++;
			return XGE_HAL_INF_LRO_END_2;
		}

		lro_match->tcp_seq_num = tcp->seq;
		lro_match->tcp_ack_num = tcp->ack_seq;
		lro_match->frags_len +=	__hal_tcp_seg_len(ip, tcp);

		hldev->lro_recent =	lro_match;

		return XGE_HAL_INF_LRO_CONT;
	}

	/* ********** New Session ***************/
	if (free_slot == -1)
		return XGE_HAL_INF_LRO_UNCAPABLE;

	if (XGE_HAL_FAIL ==	__hal_ip_lro_capable(ip, ext_info))
		return XGE_HAL_INF_LRO_UNCAPABLE;

	if (XGE_HAL_FAIL ==	__hal_tcp_lro_capable(ip, tcp, NULL, &ts_off))
		return XGE_HAL_INF_LRO_UNCAPABLE;

	xge_debug_ring(XGE_TRACE, "Creating	lro	session.");

	/*
	 * Open	a LRO session, provided	the	packet contains	payload.
	 */
	tcp_seg_len	= __hal_tcp_seg_len(ip,	tcp);
	if (tcp_seg_len	== 0)
		return XGE_HAL_INF_LRO_UNCAPABLE;

	__hal_open_lro_session (buffer,	ip,	tcp, lro, hldev, free_slot,
				tcp_seg_len, ts_off);

	return XGE_HAL_INF_LRO_BEGIN;
}

/*
 * __hal_lro_under_optimal_thresh: Finds whether combined session is optimal.
 * @ip:	ip header.
 * @tcp: tcp header.
 * @lro: lro pointer
 * @hldev: Hal context.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL xge_hal_status_e
__hal_lro_under_optimal_thresh (iplro_t	*ip,
					tcplro_t *tcp,
				lro_t *lro,
				xge_hal_device_t *hldev)
{
	if (!lro) return XGE_HAL_FAIL;

	if ((lro->total_length + __hal_tcp_seg_len(ip, tcp)	) >
						hldev->config.lro_frm_len) {
		xge_debug_ring(XGE_TRACE, "Max LRO frame len exceeded:"
		 "max length %d	\n", hldev->config.lro_frm_len);
		hldev->stats.sw_dev_info_stats.lro_frm_len_exceed_cnt++;
		return XGE_HAL_FAIL;
	}

	if (lro->sg_num	== hldev->config.lro_sg_size) {
		xge_debug_ring(XGE_TRACE, "Max sg count	exceeded:"
				 "max sg %d	\n", hldev->config.lro_sg_size);
		hldev->stats.sw_dev_info_stats.lro_sg_exceed_cnt++;
		return XGE_HAL_FAIL;
	}

	return XGE_HAL_OK;
}

/*
 * __hal_collapse_ip_hdr: Collapses	ip header.
 * @ip:	ip header.
 * @tcp: tcp header.
 * @lro: lro pointer
 * @hldev: Hal context.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL xge_hal_status_e
__hal_collapse_ip_hdr (	iplro_t	*ip,
			tcplro_t *tcp,
			lro_t *lro,
			xge_hal_device_t *hldev)
{

	lro->total_length += __hal_tcp_seg_len(ip, tcp);

	/* May be we have to handle	time stamps	or more	options	*/

	return XGE_HAL_OK;

}

/*
 * __hal_collapse_tcp_hdr: Collapses tcp header.
 * @ip:	ip header.
 * @tcp: tcp header.
 * @lro: lro pointer
 * @hldev: Hal context.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL xge_hal_status_e
__hal_collapse_tcp_hdr ( iplro_t *ip,
			 tcplro_t *tcp,
			 lro_t *lro,
			 xge_hal_device_t *hldev)
{
	lro->tcp_next_seq_num += __hal_tcp_seg_len(ip, tcp);
	return XGE_HAL_OK;

}

/*
 * __hal_append_lro: Appends new frame to existing LRO session.
 * @ip:	ip header.
 * @tcp: IN	tcp	header,	OUT	tcp	payload.
 * @seg_len: tcp payload length.
 * @lro: lro pointer
 * @hldev: Hal context.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL xge_hal_status_e
__hal_append_lro(iplro_t *ip,
		 tcplro_t **tcp,
		 u32 *seg_len,
		 lro_t *lro,
		 xge_hal_device_t *hldev)
{
	(void) __hal_collapse_ip_hdr(ip, *tcp,	lro, hldev);
	(void) __hal_collapse_tcp_hdr(ip, *tcp, lro, hldev);
	// Update mbuf chain will be done in ll	driver.
	// xge_hal_accumulate_large_rx on success of appending new frame to
	// lro will	return to ll driver	tcpdata	pointer, and tcp payload length.
	// along with return code lro frame	appended.

	lro->sg_num++;
	*seg_len = __hal_tcp_seg_len(ip, *tcp);
	*tcp = (tcplro_t *)((unsigned long)*tcp	+ (((*tcp)->doff_res)>>2));

	return XGE_HAL_OK;

}

/**
 * xge_hal_accumulate_large_rx:	LRO	a given	frame
 * frames
 * @buffer:	Ethernet frame.
 * @tcp: tcp header.
 * @seglen:	packet length.
 * @p_lro: lro pointer.
 * @ext_info: descriptor info, see xge_hal_dtr_info_t{}.
 * @hldev: HAL device.
 *
 * LRO the newly received frame, i.e. attach it	(if	possible) to the
 * already accumulated (i.e., already LRO-ed) received frames (if any),
 * to form one super-sized frame for the subsequent	processing
 * by the stack.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL xge_hal_status_e
xge_hal_accumulate_large_rx(u8 *buffer, tcplro_t **tcp, u32 *seglen,
lro_t **p_lro, xge_hal_dtr_info_t *ext_info, xge_hal_device_t *hldev,
lro_t **lro_end3)
{
	iplro_t	*ip;
	xge_hal_status_e ret;
	lro_t *lro;

	xge_debug_ring(XGE_TRACE, "Entered accumu lro. ");
	if (XGE_HAL_OK != __hal_lro_capable(buffer, &ip, (tcplro_t **)tcp,
						ext_info, hldev))
		return XGE_HAL_INF_LRO_UNCAPABLE;

	/*
	 * This	function shall get matching	LRO	or else
	 * create one and return it
	 */
		ret = __hal_get_lro_session(buffer, ip, (tcplro_t *)*tcp,
					p_lro, ext_info, hldev,	lro_end3);
	xge_debug_ring(XGE_TRACE, "ret from get_lro:%d ",ret);
	lro = *p_lro;
	if (XGE_HAL_INF_LRO_CONT == ret) {
		if (XGE_HAL_OK == __hal_lro_under_optimal_thresh(ip,
						(tcplro_t *)*tcp, lro, hldev)) {
			(void) __hal_append_lro(ip,(tcplro_t **) tcp, seglen,
							 lro,
					 hldev);
			hldev->stats.sw_dev_info_stats.tot_frms_lroised++;

			if (lro->sg_num	>= hldev->config.lro_sg_size) {
				hldev->stats.sw_dev_info_stats.lro_sg_exceed_cnt++;
				ret	= XGE_HAL_INF_LRO_END_1;
			}

		} else ret = XGE_HAL_INF_LRO_END_2;
	}

	/*
	 * Since its time to flush,
	 * update ip header	so that	it can be sent up
	 */
	if ((ret == XGE_HAL_INF_LRO_END_1) ||
		(ret ==	XGE_HAL_INF_LRO_END_2) ||
		(ret ==	XGE_HAL_INF_LRO_END_3))	{
		lro->ip_hdr->tot_len = xge_os_htons((*p_lro)->total_length);
		lro->ip_hdr->check = xge_os_htons(0);
		lro->ip_hdr->check = XGE_LL_IP_FAST_CSUM(((u8 *)(lro->ip_hdr)),
					(lro->ip_hdr->version_ihl & 0x0F));
		lro->tcp_hdr->ack_seq =	lro->tcp_ack_num;
	}

	return (ret);
}

/**
 * xge_hal_lro_close_session: Close LRO session
 * @lro: LRO Session.
 * @hldev: HAL Context.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL void
xge_hal_lro_close_session (lro_t *lro)
{
	lro->in_use = 0;
}

/**
 * xge_hal_lro_get_next_session: Returns next LRO session in the list or NULL
 *					if none	exists.
 * @hldev: Hal context.
 */
__HAL_STATIC_CHANNEL __HAL_INLINE_CHANNEL lro_t	*
xge_hal_lro_get_next_session (xge_hal_device_t *hldev)
{
	int	i;
	int	start_idx =	hldev->lro_next_idx;

	for(i =	start_idx; i < XGE_HAL_LRO_MAX_BUCKETS;	i++) {
		lro_t *lro = &hldev->lro_pool[i];

		if (!lro->in_use)
			continue;

		lro->ip_hdr->tot_len = xge_os_htons(lro->total_length);
		lro->ip_hdr->check = xge_os_htons(0);
		lro->ip_hdr->check = XGE_LL_IP_FAST_CSUM(((u8 *)(lro->ip_hdr)),
								(lro->ip_hdr->version_ihl &	0x0F));
		hldev->lro_next_idx	= i	+ 1;
		return lro;
	}

	hldev->lro_next_idx	= 0;
	return NULL;

}
#endif