1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2006 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #pragma ident "%Z%%M% %I% %E% SMI" 27 28 /* 29 * EHCI Host Controller Driver (EHCI) 30 * 31 * The EHCI driver is a software driver which interfaces to the Universal 32 * Serial Bus layer (USBA) and the Host Controller (HC). The interface to 33 * the Host Controller is defined by the EHCI Host Controller Interface. 34 * 35 * This module contains the main EHCI driver code which handles all USB 36 * transfers, bandwidth allocations and other general functionalities. 37 */ 38 39 #include <sys/usb/hcd/ehci/ehcid.h> 40 #include <sys/usb/hcd/ehci/ehci_intr.h> 41 #include <sys/usb/hcd/ehci/ehci_util.h> 42 #include <sys/usb/hcd/ehci/ehci_isoch.h> 43 44 /* Adjustable variables for the size of the pools */ 45 extern int ehci_qh_pool_size; 46 extern int ehci_qtd_pool_size; 47 48 49 /* Endpoint Descriptor (QH) related functions */ 50 ehci_qh_t *ehci_alloc_qh( 51 ehci_state_t *ehcip, 52 usba_pipe_handle_data_t *ph, 53 uint_t flag); 54 static void ehci_unpack_endpoint( 55 ehci_state_t *ehcip, 56 usba_pipe_handle_data_t *ph, 57 ehci_qh_t *qh); 58 void ehci_insert_qh( 59 ehci_state_t *ehcip, 60 usba_pipe_handle_data_t *ph); 61 static void ehci_insert_async_qh( 62 ehci_state_t *ehcip, 63 ehci_pipe_private_t *pp); 64 static void ehci_insert_intr_qh( 65 ehci_state_t *ehcip, 66 ehci_pipe_private_t *pp); 67 static void ehci_modify_qh_status_bit( 68 ehci_state_t *ehcip, 69 ehci_pipe_private_t *pp, 70 halt_bit_t action); 71 static void ehci_halt_hs_qh( 72 ehci_state_t *ehcip, 73 ehci_pipe_private_t *pp, 74 ehci_qh_t *qh); 75 static void ehci_halt_fls_ctrl_and_bulk_qh( 76 ehci_state_t *ehcip, 77 ehci_pipe_private_t *pp, 78 ehci_qh_t *qh); 79 static void ehci_clear_tt_buffer( 80 ehci_state_t *ehcip, 81 usba_pipe_handle_data_t *ph, 82 ehci_qh_t *qh); 83 static void ehci_halt_fls_intr_qh( 84 ehci_state_t *ehcip, 85 ehci_qh_t *qh); 86 void ehci_remove_qh( 87 ehci_state_t *ehcip, 88 ehci_pipe_private_t *pp, 89 boolean_t reclaim); 90 static void ehci_remove_async_qh( 91 ehci_state_t *ehcip, 92 ehci_pipe_private_t *pp, 93 boolean_t reclaim); 94 static void ehci_remove_intr_qh( 95 ehci_state_t *ehcip, 96 ehci_pipe_private_t *pp, 97 boolean_t reclaim); 98 static void ehci_insert_qh_on_reclaim_list( 99 ehci_state_t *ehcip, 100 ehci_pipe_private_t *pp); 101 void ehci_deallocate_qh( 102 ehci_state_t *ehcip, 103 ehci_qh_t *old_qh); 104 uint32_t ehci_qh_cpu_to_iommu( 105 ehci_state_t *ehcip, 106 ehci_qh_t *addr); 107 ehci_qh_t *ehci_qh_iommu_to_cpu( 108 ehci_state_t *ehcip, 109 uintptr_t addr); 110 111 /* Transfer Descriptor (QTD) related functions */ 112 static int ehci_initialize_dummy( 113 ehci_state_t *ehcip, 114 ehci_qh_t *qh); 115 ehci_trans_wrapper_t *ehci_allocate_ctrl_resources( 116 ehci_state_t *ehcip, 117 ehci_pipe_private_t *pp, 118 usb_ctrl_req_t *ctrl_reqp, 119 usb_flags_t usb_flags); 120 void ehci_insert_ctrl_req( 121 ehci_state_t *ehcip, 122 usba_pipe_handle_data_t *ph, 123 usb_ctrl_req_t *ctrl_reqp, 124 ehci_trans_wrapper_t *tw, 125 usb_flags_t usb_flags); 126 ehci_trans_wrapper_t *ehci_allocate_bulk_resources( 127 ehci_state_t *ehcip, 128 ehci_pipe_private_t *pp, 129 usb_bulk_req_t *bulk_reqp, 130 usb_flags_t usb_flags); 131 void ehci_insert_bulk_req( 132 ehci_state_t *ehcip, 133 usba_pipe_handle_data_t *ph, 134 usb_bulk_req_t *bulk_reqp, 135 ehci_trans_wrapper_t *tw, 136 usb_flags_t flags); 137 int ehci_start_periodic_pipe_polling( 138 ehci_state_t *ehcip, 139 usba_pipe_handle_data_t *ph, 140 usb_opaque_t periodic_in_reqp, 141 usb_flags_t flags); 142 static int ehci_start_pipe_polling( 143 ehci_state_t *ehcip, 144 usba_pipe_handle_data_t *ph, 145 usb_flags_t flags); 146 static int ehci_start_intr_polling( 147 ehci_state_t *ehcip, 148 usba_pipe_handle_data_t *ph, 149 usb_flags_t flags); 150 static void ehci_set_periodic_pipe_polling( 151 ehci_state_t *ehcip, 152 usba_pipe_handle_data_t *ph); 153 ehci_trans_wrapper_t *ehci_allocate_intr_resources( 154 ehci_state_t *ehcip, 155 usba_pipe_handle_data_t *ph, 156 usb_intr_req_t *intr_reqp, 157 usb_flags_t usb_flags); 158 void ehci_insert_intr_req( 159 ehci_state_t *ehcip, 160 ehci_pipe_private_t *pp, 161 ehci_trans_wrapper_t *tw, 162 usb_flags_t flags); 163 int ehci_stop_periodic_pipe_polling( 164 ehci_state_t *ehcip, 165 usba_pipe_handle_data_t *ph, 166 usb_flags_t flags); 167 int ehci_insert_qtd( 168 ehci_state_t *ehcip, 169 uint32_t qtd_ctrl, 170 size_t qtd_dma_offs, 171 size_t qtd_length, 172 uint32_t qtd_ctrl_phase, 173 ehci_pipe_private_t *pp, 174 ehci_trans_wrapper_t *tw); 175 static ehci_qtd_t *ehci_allocate_qtd_from_pool( 176 ehci_state_t *ehcip); 177 static void ehci_fill_in_qtd( 178 ehci_state_t *ehcip, 179 ehci_qtd_t *qtd, 180 uint32_t qtd_ctrl, 181 size_t qtd_dma_offs, 182 size_t qtd_length, 183 uint32_t qtd_ctrl_phase, 184 ehci_pipe_private_t *pp, 185 ehci_trans_wrapper_t *tw); 186 static void ehci_insert_qtd_on_tw( 187 ehci_state_t *ehcip, 188 ehci_trans_wrapper_t *tw, 189 ehci_qtd_t *qtd); 190 static void ehci_insert_qtd_into_active_qtd_list( 191 ehci_state_t *ehcip, 192 ehci_qtd_t *curr_qtd); 193 void ehci_remove_qtd_from_active_qtd_list( 194 ehci_state_t *ehcip, 195 ehci_qtd_t *curr_qtd); 196 static void ehci_traverse_qtds( 197 ehci_state_t *ehcip, 198 usba_pipe_handle_data_t *ph); 199 void ehci_deallocate_qtd( 200 ehci_state_t *ehcip, 201 ehci_qtd_t *old_qtd); 202 uint32_t ehci_qtd_cpu_to_iommu( 203 ehci_state_t *ehcip, 204 ehci_qtd_t *addr); 205 ehci_qtd_t *ehci_qtd_iommu_to_cpu( 206 ehci_state_t *ehcip, 207 uintptr_t addr); 208 209 /* Transfer Wrapper (TW) functions */ 210 static ehci_trans_wrapper_t *ehci_create_transfer_wrapper( 211 ehci_state_t *ehcip, 212 ehci_pipe_private_t *pp, 213 size_t length, 214 uint_t usb_flags); 215 int ehci_allocate_tds_for_tw( 216 ehci_state_t *ehcip, 217 ehci_pipe_private_t *pp, 218 ehci_trans_wrapper_t *tw, 219 size_t qtd_count); 220 static ehci_trans_wrapper_t *ehci_allocate_tw_resources( 221 ehci_state_t *ehcip, 222 ehci_pipe_private_t *pp, 223 size_t length, 224 usb_flags_t usb_flags, 225 size_t td_count); 226 static void ehci_free_tw_td_resources( 227 ehci_state_t *ehcip, 228 ehci_trans_wrapper_t *tw); 229 static void ehci_start_xfer_timer( 230 ehci_state_t *ehcip, 231 ehci_pipe_private_t *pp, 232 ehci_trans_wrapper_t *tw); 233 void ehci_stop_xfer_timer( 234 ehci_state_t *ehcip, 235 ehci_trans_wrapper_t *tw, 236 uint_t flag); 237 static void ehci_xfer_timeout_handler(void *arg); 238 static void ehci_remove_tw_from_timeout_list( 239 ehci_state_t *ehcip, 240 ehci_trans_wrapper_t *tw); 241 static void ehci_start_timer(ehci_state_t *ehcip, 242 ehci_pipe_private_t *pp); 243 void ehci_deallocate_tw( 244 ehci_state_t *ehcip, 245 ehci_pipe_private_t *pp, 246 ehci_trans_wrapper_t *tw); 247 void ehci_free_dma_resources( 248 ehci_state_t *ehcip, 249 usba_pipe_handle_data_t *ph); 250 static void ehci_free_tw( 251 ehci_state_t *ehcip, 252 ehci_pipe_private_t *pp, 253 ehci_trans_wrapper_t *tw); 254 255 /* Miscellaneous functions */ 256 int ehci_allocate_intr_in_resource( 257 ehci_state_t *ehcip, 258 ehci_pipe_private_t *pp, 259 ehci_trans_wrapper_t *tw, 260 usb_flags_t flags); 261 void ehci_pipe_cleanup( 262 ehci_state_t *ehcip, 263 usba_pipe_handle_data_t *ph); 264 static void ehci_wait_for_transfers_completion( 265 ehci_state_t *ehcip, 266 ehci_pipe_private_t *pp); 267 void ehci_check_for_transfers_completion( 268 ehci_state_t *ehcip, 269 ehci_pipe_private_t *pp); 270 static void ehci_save_data_toggle( 271 ehci_state_t *ehcip, 272 usba_pipe_handle_data_t *ph); 273 void ehci_restore_data_toggle( 274 ehci_state_t *ehcip, 275 usba_pipe_handle_data_t *ph); 276 void ehci_handle_outstanding_requests( 277 ehci_state_t *ehcip, 278 ehci_pipe_private_t *pp); 279 void ehci_deallocate_intr_in_resource( 280 ehci_state_t *ehcip, 281 ehci_pipe_private_t *pp, 282 ehci_trans_wrapper_t *tw); 283 void ehci_do_client_periodic_in_req_callback( 284 ehci_state_t *ehcip, 285 ehci_pipe_private_t *pp, 286 usb_cr_t completion_reason); 287 void ehci_hcdi_callback( 288 usba_pipe_handle_data_t *ph, 289 ehci_trans_wrapper_t *tw, 290 usb_cr_t completion_reason); 291 292 293 /* 294 * Endpoint Descriptor (QH) manipulations functions 295 */ 296 297 /* 298 * ehci_alloc_qh: 299 * 300 * Allocate an endpoint descriptor (QH) 301 * 302 * NOTE: This function is also called from POLLED MODE. 303 */ 304 ehci_qh_t * 305 ehci_alloc_qh( 306 ehci_state_t *ehcip, 307 usba_pipe_handle_data_t *ph, 308 uint_t flag) 309 { 310 int i, state; 311 ehci_qh_t *qh; 312 313 USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 314 "ehci_alloc_qh: ph = 0x%p flag = 0x%x", (void *)ph, flag); 315 316 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 317 318 /* 319 * If this is for a ISOC endpoint return null. 320 * Isochronous uses ITD put directly onto the PFL. 321 */ 322 if (ph) { 323 if (EHCI_ISOC_ENDPOINT((&ph->p_ep))) { 324 325 return (NULL); 326 } 327 } 328 329 /* 330 * The first 63 endpoints in the Endpoint Descriptor (QH) 331 * buffer pool are reserved for building interrupt lattice 332 * tree. Search for a blank endpoint descriptor in the QH 333 * buffer pool. 334 */ 335 for (i = EHCI_NUM_STATIC_NODES; i < ehci_qh_pool_size; i ++) { 336 state = Get_QH(ehcip->ehci_qh_pool_addr[i].qh_state); 337 338 if (state == EHCI_QH_FREE) { 339 break; 340 } 341 } 342 343 USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 344 "ehci_alloc_qh: Allocated %d", i); 345 346 if (i == ehci_qh_pool_size) { 347 USB_DPRINTF_L2(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 348 "ehci_alloc_qh: QH exhausted"); 349 350 return (NULL); 351 } else { 352 qh = &ehcip->ehci_qh_pool_addr[i]; 353 354 USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 355 "ehci_alloc_qh: Allocated address 0x%p", (void *)qh); 356 357 /* Check polled mode flag */ 358 if (flag == EHCI_POLLED_MODE_FLAG) { 359 Set_QH(qh->qh_link_ptr, EHCI_QH_LINK_PTR_VALID); 360 Set_QH(qh->qh_ctrl, EHCI_QH_CTRL_ED_INACTIVATE); 361 } 362 363 /* Unpack the endpoint descriptor into a control field */ 364 if (ph) { 365 if ((ehci_initialize_dummy(ehcip, 366 qh)) == USB_NO_RESOURCES) { 367 368 bzero((void *)qh, sizeof (ehci_qh_t)); 369 Set_QH(qh->qh_state, EHCI_QH_FREE); 370 371 return (NULL); 372 } 373 374 ehci_unpack_endpoint(ehcip, ph, qh); 375 376 Set_QH(qh->qh_curr_qtd, NULL); 377 Set_QH(qh->qh_alt_next_qtd, 378 EHCI_QH_ALT_NEXT_QTD_PTR_VALID); 379 380 /* Change QH's state Active */ 381 Set_QH(qh->qh_state, EHCI_QH_ACTIVE); 382 } else { 383 Set_QH(qh->qh_status, EHCI_QH_STS_HALTED); 384 385 /* Change QH's state Static */ 386 Set_QH(qh->qh_state, EHCI_QH_STATIC); 387 } 388 389 ehci_print_qh(ehcip, qh); 390 391 return (qh); 392 } 393 } 394 395 396 /* 397 * ehci_unpack_endpoint: 398 * 399 * Unpack the information in the pipe handle and create the first byte 400 * of the Host Controller's (HC) Endpoint Descriptor (QH). 401 */ 402 static void 403 ehci_unpack_endpoint( 404 ehci_state_t *ehcip, 405 usba_pipe_handle_data_t *ph, 406 ehci_qh_t *qh) 407 { 408 usb_ep_descr_t *endpoint = &ph->p_ep; 409 uint_t maxpacketsize, addr, xactions; 410 uint_t ctrl = 0, status = 0, split_ctrl = 0; 411 usb_port_status_t usb_port_status; 412 usba_device_t *usba_device = ph->p_usba_device; 413 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 414 415 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 416 "ehci_unpack_endpoint:"); 417 418 mutex_enter(&usba_device->usb_mutex); 419 ctrl = usba_device->usb_addr; 420 usb_port_status = usba_device->usb_port_status; 421 mutex_exit(&usba_device->usb_mutex); 422 423 addr = endpoint->bEndpointAddress; 424 425 /* Assign the endpoint's address */ 426 ctrl |= ((addr & USB_EP_NUM_MASK) << EHCI_QH_CTRL_ED_NUMBER_SHIFT); 427 428 /* Assign the speed */ 429 switch (usb_port_status) { 430 case USBA_LOW_SPEED_DEV: 431 ctrl |= EHCI_QH_CTRL_ED_LOW_SPEED; 432 break; 433 case USBA_FULL_SPEED_DEV: 434 ctrl |= EHCI_QH_CTRL_ED_FULL_SPEED; 435 break; 436 case USBA_HIGH_SPEED_DEV: 437 ctrl |= EHCI_QH_CTRL_ED_HIGH_SPEED; 438 break; 439 } 440 441 switch (endpoint->bmAttributes & USB_EP_ATTR_MASK) { 442 case USB_EP_ATTR_CONTROL: 443 /* Assign data toggle information */ 444 ctrl |= EHCI_QH_CTRL_DATA_TOGGLE; 445 446 if (usb_port_status != USBA_HIGH_SPEED_DEV) { 447 ctrl |= EHCI_QH_CTRL_CONTROL_ED_FLAG; 448 } 449 /* FALLTHRU */ 450 case USB_EP_ATTR_BULK: 451 /* Maximum nak counter */ 452 ctrl |= EHCI_QH_CTRL_MAX_NC; 453 454 if (usb_port_status == USBA_HIGH_SPEED_DEV) { 455 /* 456 * Perform ping before executing control 457 * and bulk transactions. 458 */ 459 status = EHCI_QH_STS_DO_PING; 460 } 461 break; 462 case USB_EP_ATTR_INTR: 463 /* Set start split mask */ 464 split_ctrl = (pp->pp_smask & EHCI_QH_SPLIT_CTRL_INTR_MASK); 465 466 /* 467 * Set complete split mask for low/full speed 468 * usb devices. 469 */ 470 if (usb_port_status != USBA_HIGH_SPEED_DEV) { 471 split_ctrl |= ((pp->pp_cmask << 472 EHCI_QH_SPLIT_CTRL_COMP_SHIFT) & 473 EHCI_QH_SPLIT_CTRL_COMP_MASK); 474 } 475 break; 476 } 477 478 /* Get the max transactions per microframe */ 479 xactions = (endpoint->wMaxPacketSize & 480 USB_EP_MAX_XACTS_MASK) >> USB_EP_MAX_XACTS_SHIFT; 481 482 switch (xactions) { 483 case 0: 484 split_ctrl |= EHCI_QH_SPLIT_CTRL_1_XACTS; 485 break; 486 case 1: 487 split_ctrl |= EHCI_QH_SPLIT_CTRL_2_XACTS; 488 break; 489 case 2: 490 split_ctrl |= EHCI_QH_SPLIT_CTRL_3_XACTS; 491 break; 492 default: 493 split_ctrl |= EHCI_QH_SPLIT_CTRL_1_XACTS; 494 break; 495 } 496 497 /* 498 * For low/full speed devices, program high speed hub 499 * address and port number. 500 */ 501 if (usb_port_status != USBA_HIGH_SPEED_DEV) { 502 mutex_enter(&usba_device->usb_mutex); 503 split_ctrl |= ((usba_device->usb_hs_hub_addr 504 << EHCI_QH_SPLIT_CTRL_HUB_ADDR_SHIFT) & 505 EHCI_QH_SPLIT_CTRL_HUB_ADDR); 506 507 split_ctrl |= ((usba_device->usb_hs_hub_port 508 << EHCI_QH_SPLIT_CTRL_HUB_PORT_SHIFT) & 509 EHCI_QH_SPLIT_CTRL_HUB_PORT); 510 511 mutex_exit(&usba_device->usb_mutex); 512 513 /* Set start split transaction state */ 514 status = EHCI_QH_STS_DO_START_SPLIT; 515 } 516 517 /* Assign endpoint's maxpacketsize */ 518 maxpacketsize = endpoint->wMaxPacketSize & USB_EP_MAX_PKTSZ_MASK; 519 maxpacketsize = maxpacketsize << EHCI_QH_CTRL_MAXPKTSZ_SHIFT; 520 ctrl |= (maxpacketsize & EHCI_QH_CTRL_MAXPKTSZ); 521 522 Set_QH(qh->qh_ctrl, ctrl); 523 Set_QH(qh->qh_split_ctrl, split_ctrl); 524 Set_QH(qh->qh_status, status); 525 } 526 527 528 /* 529 * ehci_insert_qh: 530 * 531 * Add the Endpoint Descriptor (QH) into the Host Controller's 532 * (HC) appropriate endpoint list. 533 */ 534 void 535 ehci_insert_qh( 536 ehci_state_t *ehcip, 537 usba_pipe_handle_data_t *ph) 538 { 539 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 540 541 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 542 "ehci_insert_qh: qh=0x%p", pp->pp_qh); 543 544 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 545 546 switch (ph->p_ep.bmAttributes & USB_EP_ATTR_MASK) { 547 case USB_EP_ATTR_CONTROL: 548 case USB_EP_ATTR_BULK: 549 ehci_insert_async_qh(ehcip, pp); 550 ehcip->ehci_open_async_count++; 551 break; 552 case USB_EP_ATTR_INTR: 553 ehci_insert_intr_qh(ehcip, pp); 554 ehcip->ehci_open_periodic_count++; 555 break; 556 case USB_EP_ATTR_ISOCH: 557 /* ISOCH does not use QH, don't do anything but update count */ 558 ehcip->ehci_open_periodic_count++; 559 break; 560 } 561 ehci_toggle_scheduler(ehcip); 562 } 563 564 565 /* 566 * ehci_insert_async_qh: 567 * 568 * Insert a control/bulk endpoint into the Host Controller's (HC) 569 * Asynchronous schedule endpoint list. 570 */ 571 static void 572 ehci_insert_async_qh( 573 ehci_state_t *ehcip, 574 ehci_pipe_private_t *pp) 575 { 576 ehci_qh_t *qh = pp->pp_qh; 577 ehci_qh_t *async_head_qh; 578 ehci_qh_t *next_qh; 579 uintptr_t qh_addr; 580 581 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 582 "ehci_insert_async_qh:"); 583 584 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 585 586 /* Make sure this QH is not already in the list */ 587 ASSERT((Get_QH(qh->qh_prev) & EHCI_QH_LINK_PTR) == NULL); 588 589 qh_addr = ehci_qh_cpu_to_iommu(ehcip, qh); 590 591 /* Obtain a ptr to the head of the Async schedule list */ 592 async_head_qh = ehcip->ehci_head_of_async_sched_list; 593 594 if (async_head_qh == NULL) { 595 /* Set this QH to be the "head" of the circular list */ 596 Set_QH(qh->qh_ctrl, 597 (Get_QH(qh->qh_ctrl) | EHCI_QH_CTRL_RECLAIM_HEAD)); 598 599 /* Set new QH's link and previous pointer to itself */ 600 Set_QH(qh->qh_link_ptr, qh_addr | EHCI_QH_LINK_REF_QH); 601 Set_QH(qh->qh_prev, qh_addr); 602 603 ehcip->ehci_head_of_async_sched_list = qh; 604 605 /* Set the head ptr to the new endpoint */ 606 Set_OpReg(ehci_async_list_addr, qh_addr); 607 608 /* 609 * For some reason this register might get nulled out by 610 * the Uli M1575 South Bridge. To workaround the hardware 611 * problem, check the value after write and retry if the 612 * last write fails. 613 * 614 * If the ASYNCLISTADDR remains "stuck" after 615 * EHCI_MAX_RETRY retries, then the M1575 is broken 616 * and is stuck in an inconsistent state and is about 617 * to crash the machine with a trn_oor panic when it 618 * does a DMA read from 0x0. It is better to panic 619 * now rather than wait for the trn_oor crash; this 620 * way Customer Service will have a clean signature 621 * that indicts the M1575 chip rather than a 622 * mysterious and hard-to-diagnose trn_oor panic. 623 */ 624 if ((ehcip->ehci_vendor_id == PCI_VENDOR_ULi_M1575) && 625 (ehcip->ehci_device_id == PCI_DEVICE_ULi_M1575) && 626 (qh_addr != Get_OpReg(ehci_async_list_addr))) { 627 int retry = 0; 628 629 Set_OpRegRetry(ehci_async_list_addr, qh_addr, retry); 630 if (retry >= EHCI_MAX_RETRY) 631 cmn_err(CE_PANIC, "ehci_insert_async_qh:" 632 " ASYNCLISTADDR write failed."); 633 634 USB_DPRINTF_L2(PRINT_MASK_ATTA, ehcip->ehci_log_hdl, 635 "ehci_insert_async_qh: ASYNCLISTADDR " 636 "write failed, retry=%d", retry); 637 } 638 } else { 639 ASSERT(Get_QH(async_head_qh->qh_ctrl) & 640 EHCI_QH_CTRL_RECLAIM_HEAD); 641 642 /* Ensure this QH's "H" bit is not set */ 643 Set_QH(qh->qh_ctrl, 644 (Get_QH(qh->qh_ctrl) & ~EHCI_QH_CTRL_RECLAIM_HEAD)); 645 646 next_qh = ehci_qh_iommu_to_cpu(ehcip, 647 Get_QH(async_head_qh->qh_link_ptr) & EHCI_QH_LINK_PTR); 648 649 /* Set new QH's link and previous pointers */ 650 Set_QH(qh->qh_link_ptr, 651 Get_QH(async_head_qh->qh_link_ptr) | EHCI_QH_LINK_REF_QH); 652 Set_QH(qh->qh_prev, ehci_qh_cpu_to_iommu(ehcip, async_head_qh)); 653 654 /* Set next QH's prev pointer */ 655 Set_QH(next_qh->qh_prev, ehci_qh_cpu_to_iommu(ehcip, qh)); 656 657 /* Set QH Head's link pointer points to new QH */ 658 Set_QH(async_head_qh->qh_link_ptr, 659 qh_addr | EHCI_QH_LINK_REF_QH); 660 } 661 } 662 663 664 /* 665 * ehci_insert_intr_qh: 666 * 667 * Insert a interrupt endpoint into the Host Controller's (HC) interrupt 668 * lattice tree. 669 */ 670 static void 671 ehci_insert_intr_qh( 672 ehci_state_t *ehcip, 673 ehci_pipe_private_t *pp) 674 { 675 ehci_qh_t *qh = pp->pp_qh; 676 ehci_qh_t *next_lattice_qh, *lattice_qh; 677 uint_t hnode; 678 679 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 680 "ehci_insert_intr_qh:"); 681 682 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 683 684 /* Make sure this QH is not already in the list */ 685 ASSERT((Get_QH(qh->qh_prev) & EHCI_QH_LINK_PTR) == NULL); 686 687 /* 688 * The appropriate high speed node was found 689 * during the opening of the pipe. 690 */ 691 hnode = pp->pp_pnode; 692 693 /* Find the lattice endpoint */ 694 lattice_qh = &ehcip->ehci_qh_pool_addr[hnode]; 695 696 /* Find the next lattice endpoint */ 697 next_lattice_qh = ehci_qh_iommu_to_cpu( 698 ehcip, (Get_QH(lattice_qh->qh_link_ptr) & EHCI_QH_LINK_PTR)); 699 700 /* Update the previous pointer */ 701 Set_QH(qh->qh_prev, ehci_qh_cpu_to_iommu(ehcip, lattice_qh)); 702 703 /* Check next_lattice_qh value */ 704 if (next_lattice_qh) { 705 /* Update this qh to point to the next one in the lattice */ 706 Set_QH(qh->qh_link_ptr, Get_QH(lattice_qh->qh_link_ptr)); 707 708 /* Update the previous pointer of qh->qh_link_ptr */ 709 if (Get_QH(next_lattice_qh->qh_state) != EHCI_QH_STATIC) { 710 Set_QH(next_lattice_qh->qh_prev, 711 ehci_qh_cpu_to_iommu(ehcip, qh)); 712 } 713 } else { 714 /* Update qh's link pointer to terminate periodic list */ 715 Set_QH(qh->qh_link_ptr, 716 (Get_QH(lattice_qh->qh_link_ptr) | EHCI_QH_LINK_PTR_VALID)); 717 } 718 719 /* Insert this endpoint into the lattice */ 720 Set_QH(lattice_qh->qh_link_ptr, 721 (ehci_qh_cpu_to_iommu(ehcip, qh) | EHCI_QH_LINK_REF_QH)); 722 } 723 724 725 /* 726 * ehci_modify_qh_status_bit: 727 * 728 * Modify the halt bit on the Host Controller (HC) Endpoint Descriptor (QH). 729 * 730 * If several threads try to halt the same pipe, they will need to wait on 731 * a condition variable. Only one thread is allowed to halt or unhalt the 732 * pipe at a time. 733 * 734 * Usually after a halt pipe, an unhalt pipe will follow soon after. There 735 * is an assumption that an Unhalt pipe will never occur without a halt pipe. 736 */ 737 static void 738 ehci_modify_qh_status_bit( 739 ehci_state_t *ehcip, 740 ehci_pipe_private_t *pp, 741 halt_bit_t action) 742 { 743 ehci_qh_t *qh = pp->pp_qh; 744 uint_t smask, eps, split_intr_qh; 745 uint_t status; 746 747 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 748 "ehci_modify_qh_status_bit: action=0x%x qh=0x%p", 749 action, qh); 750 751 ehci_print_qh(ehcip, qh); 752 753 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 754 755 /* 756 * If this pipe is in the middle of halting don't allow another 757 * thread to come in and modify the same pipe. 758 */ 759 while (pp->pp_halt_state & EHCI_HALT_STATE_HALTING) { 760 761 cv_wait(&pp->pp_halt_cmpl_cv, 762 &ehcip->ehci_int_mutex); 763 } 764 765 /* Sync the QH QTD pool to get up to date information */ 766 Sync_QH_QTD_Pool(ehcip); 767 768 769 if (action == CLEAR_HALT) { 770 /* 771 * If the halt bit is to be cleared, just clear it. 772 * there shouldn't be any race condition problems. 773 * If the host controller reads the bit before the 774 * driver has a chance to set the bit, the bit will 775 * be reread on the next frame. 776 */ 777 Set_QH(qh->qh_ctrl, 778 (Get_QH(qh->qh_ctrl) & ~EHCI_QH_CTRL_ED_INACTIVATE)); 779 Set_QH(qh->qh_status, 780 Get_QH(qh->qh_status) & ~(EHCI_QH_STS_XACT_STATUS)); 781 782 goto success; 783 } 784 785 /* Halt the the QH, but first check to see if it is already halted */ 786 status = Get_QH(qh->qh_status); 787 if (!(status & EHCI_QH_STS_HALTED)) { 788 /* Indicate that this pipe is in the middle of halting. */ 789 pp->pp_halt_state |= EHCI_HALT_STATE_HALTING; 790 791 /* 792 * Find out if this is an full/low speed interrupt endpoint. 793 * A non-zero Cmask indicates that this QH is an interrupt 794 * endpoint. Check the endpoint speed to see if it is either 795 * FULL or LOW . 796 */ 797 smask = Get_QH(qh->qh_split_ctrl) & 798 EHCI_QH_SPLIT_CTRL_INTR_MASK; 799 eps = Get_QH(qh->qh_ctrl) & EHCI_QH_CTRL_ED_SPEED; 800 split_intr_qh = ((smask != 0) && 801 (eps != EHCI_QH_CTRL_ED_HIGH_SPEED)); 802 803 if (eps == EHCI_QH_CTRL_ED_HIGH_SPEED) { 804 ehci_halt_hs_qh(ehcip, pp, qh); 805 } else { 806 if (split_intr_qh) { 807 ehci_halt_fls_intr_qh(ehcip, qh); 808 } else { 809 ehci_halt_fls_ctrl_and_bulk_qh(ehcip, pp, qh); 810 } 811 } 812 813 /* Indicate that this pipe is not in the middle of halting. */ 814 pp->pp_halt_state &= ~EHCI_HALT_STATE_HALTING; 815 } 816 817 /* Sync the QH QTD pool again to get the most up to date information */ 818 Sync_QH_QTD_Pool(ehcip); 819 820 ehci_print_qh(ehcip, qh); 821 822 status = Get_QH(qh->qh_status); 823 if (!(status & EHCI_QH_STS_HALTED)) { 824 USB_DPRINTF_L1(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 825 "ehci_modify_qh_status_bit: Failed to halt qh=0x%p", qh); 826 827 ehci_print_qh(ehcip, qh); 828 829 /* Set host controller soft state to error */ 830 ehcip->ehci_hc_soft_state = EHCI_CTLR_ERROR_STATE; 831 832 ASSERT(status & EHCI_QH_STS_HALTED); 833 } 834 835 success: 836 /* Wake up threads waiting for this pipe to be halted. */ 837 cv_signal(&pp->pp_halt_cmpl_cv); 838 } 839 840 841 /* 842 * ehci_halt_hs_qh: 843 * 844 * Halts all types of HIGH SPEED QHs. 845 */ 846 static void 847 ehci_halt_hs_qh( 848 ehci_state_t *ehcip, 849 ehci_pipe_private_t *pp, 850 ehci_qh_t *qh) 851 { 852 usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; 853 854 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 855 "ehci_halt_hs_qh:"); 856 857 /* Remove this qh from the HCD's view, but do not reclaim it */ 858 ehci_remove_qh(ehcip, pp, B_FALSE); 859 860 /* 861 * Wait for atleast one SOF, just in case the HCD is in the 862 * middle accessing this QH. 863 */ 864 (void) ehci_wait_for_sof(ehcip); 865 866 /* Sync the QH QTD pool to get up to date information */ 867 Sync_QH_QTD_Pool(ehcip); 868 869 /* Modify the status bit and halt this QH. */ 870 Set_QH(qh->qh_status, 871 ((Get_QH(qh->qh_status) & 872 ~(EHCI_QH_STS_ACTIVE)) | EHCI_QH_STS_HALTED)); 873 874 /* Insert this QH back into the HCD's view */ 875 ehci_insert_qh(ehcip, ph); 876 } 877 878 879 /* 880 * ehci_halt_fls_ctrl_and_bulk_qh: 881 * 882 * Halts FULL/LOW Ctrl and Bulk QHs only. 883 */ 884 static void 885 ehci_halt_fls_ctrl_and_bulk_qh( 886 ehci_state_t *ehcip, 887 ehci_pipe_private_t *pp, 888 ehci_qh_t *qh) 889 { 890 usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; 891 uint_t status, split_status, bytes_left; 892 893 894 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 895 "ehci_halt_fls_ctrl_and_bulk_qh:"); 896 897 /* Remove this qh from the HCD's view, but do not reclaim it */ 898 ehci_remove_qh(ehcip, pp, B_FALSE); 899 900 /* 901 * Wait for atleast one SOF, just in case the HCD is in the 902 * middle accessing this QH. 903 */ 904 (void) ehci_wait_for_sof(ehcip); 905 906 /* Sync the QH QTD pool to get up to date information */ 907 Sync_QH_QTD_Pool(ehcip); 908 909 /* Modify the status bit and halt this QH. */ 910 Set_QH(qh->qh_status, 911 ((Get_QH(qh->qh_status) & 912 ~(EHCI_QH_STS_ACTIVE)) | EHCI_QH_STS_HALTED)); 913 914 /* Check to see if the QH was in the middle of a transaction */ 915 status = Get_QH(qh->qh_status); 916 split_status = status & EHCI_QH_STS_SPLIT_XSTATE; 917 bytes_left = status & EHCI_QH_STS_BYTES_TO_XFER; 918 if ((split_status == EHCI_QH_STS_DO_COMPLETE_SPLIT) && 919 (bytes_left != 0)) { 920 /* send ClearTTBuffer to this device's parent 2.0 hub */ 921 ehci_clear_tt_buffer(ehcip, ph, qh); 922 } 923 924 /* Insert this QH back into the HCD's view */ 925 ehci_insert_qh(ehcip, ph); 926 } 927 928 929 /* 930 * ehci_clear_tt_buffer 931 * 932 * This function will sent a Clear_TT_Buffer request to the pipe's 933 * parent 2.0 hub. 934 */ 935 static void 936 ehci_clear_tt_buffer( 937 ehci_state_t *ehcip, 938 usba_pipe_handle_data_t *ph, 939 ehci_qh_t *qh) 940 { 941 usba_device_t *usba_device; 942 usba_device_t *hub_usba_device; 943 usb_pipe_handle_t hub_def_ph; 944 usb_ep_descr_t *eptd; 945 uchar_t attributes; 946 uint16_t wValue; 947 usb_ctrl_setup_t setup; 948 usb_cr_t completion_reason; 949 usb_cb_flags_t cb_flags; 950 int retry; 951 952 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 953 "ehci_clear_tt_buffer: "); 954 955 /* Get some information about the current pipe */ 956 usba_device = ph->p_usba_device; 957 eptd = &ph->p_ep; 958 attributes = eptd->bmAttributes & USB_EP_ATTR_MASK; 959 960 /* 961 * Create the wIndex for this request (usb spec 11.24.2.3) 962 * 3..0 Endpoint Number 963 * 10..4 Device Address 964 * 12..11 Endpoint Type 965 * 14..13 Reserved (must be 0) 966 * 15 Direction 1 = IN, 0 = OUT 967 */ 968 wValue = 0; 969 if ((eptd->bEndpointAddress & USB_EP_DIR_MASK) == USB_EP_DIR_IN) { 970 wValue |= 0x8000; 971 } 972 wValue |= attributes << 11; 973 wValue |= (Get_QH(qh->qh_ctrl) & EHCI_QH_CTRL_DEVICE_ADDRESS) << 4; 974 wValue |= (Get_QH(qh->qh_ctrl) & EHCI_QH_CTRL_ED_HIGH_SPEED) >> 975 EHCI_QH_CTRL_ED_NUMBER_SHIFT; 976 977 mutex_exit(&ehcip->ehci_int_mutex); 978 979 /* Manually fill in the request. */ 980 setup.bmRequestType = EHCI_CLEAR_TT_BUFFER_REQTYPE; 981 setup.bRequest = EHCI_CLEAR_TT_BUFFER_BREQ; 982 setup.wValue = wValue; 983 setup.wIndex = 1; 984 setup.wLength = 0; 985 setup.attrs = USB_ATTRS_NONE; 986 987 /* Get the usba_device of the parent 2.0 hub. */ 988 mutex_enter(&usba_device->usb_mutex); 989 hub_usba_device = usba_device->usb_hs_hub_usba_dev; 990 mutex_exit(&usba_device->usb_mutex); 991 992 /* Get the default ctrl pipe for the parent 2.0 hub */ 993 mutex_enter(&hub_usba_device->usb_mutex); 994 hub_def_ph = (usb_pipe_handle_t)&hub_usba_device->usb_ph_list[0]; 995 mutex_exit(&hub_usba_device->usb_mutex); 996 997 for (retry = 0; retry < 3; retry++) { 998 999 /* sync send the request to the default pipe */ 1000 if (usb_pipe_ctrl_xfer_wait( 1001 hub_def_ph, 1002 &setup, 1003 NULL, 1004 &completion_reason, &cb_flags, 0) == USB_SUCCESS) { 1005 1006 break; 1007 } 1008 1009 USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 1010 "ehci_clear_tt_buffer: Failed to clear tt buffer," 1011 "retry = %d, cr = %d, cb_flags = 0x%x\n", 1012 retry, completion_reason, cb_flags); 1013 } 1014 1015 if (retry >= 3) { 1016 char *path = kmem_alloc(MAXPATHLEN, KM_SLEEP); 1017 dev_info_t *dip = hub_usba_device->usb_dip; 1018 1019 /* 1020 * Ask the user to hotplug the 2.0 hub, to make sure that 1021 * all the buffer is in sync since this command has failed. 1022 */ 1023 USB_DPRINTF_L0(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 1024 "Error recovery failure: Please hotplug the 2.0 hub at" 1025 "%s", ddi_pathname(dip, path)); 1026 1027 kmem_free(path, MAXPATHLEN); 1028 } 1029 1030 mutex_enter(&ehcip->ehci_int_mutex); 1031 } 1032 1033 /* 1034 * ehci_halt_fls_intr_qh: 1035 * 1036 * Halts FULL/LOW speed Intr QHs. 1037 */ 1038 static void 1039 ehci_halt_fls_intr_qh( 1040 ehci_state_t *ehcip, 1041 ehci_qh_t *qh) 1042 { 1043 usb_frame_number_t starting_frame; 1044 usb_frame_number_t frames_past; 1045 uint_t status, i; 1046 1047 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 1048 "ehci_halt_fls_intr_qh:"); 1049 1050 /* 1051 * Ask the HC to deactivate the QH in a 1052 * full/low periodic QH. 1053 */ 1054 Set_QH(qh->qh_ctrl, 1055 (Get_QH(qh->qh_ctrl) | EHCI_QH_CTRL_ED_INACTIVATE)); 1056 1057 starting_frame = ehci_get_current_frame_number(ehcip); 1058 1059 /* 1060 * Wait at least EHCI_NUM_INTR_QH_LISTS+2 frame or until 1061 * the QH has been halted. 1062 */ 1063 Sync_QH_QTD_Pool(ehcip); 1064 frames_past = 0; 1065 status = Get_QH(qh->qh_status) & EHCI_QTD_CTRL_ACTIVE_XACT; 1066 1067 while ((frames_past <= (EHCI_NUM_INTR_QH_LISTS + 2)) && 1068 (status != 0)) { 1069 1070 (void) ehci_wait_for_sof(ehcip); 1071 1072 Sync_QH_QTD_Pool(ehcip); 1073 status = Get_QH(qh->qh_status) & EHCI_QTD_CTRL_ACTIVE_XACT; 1074 frames_past = ehci_get_current_frame_number(ehcip) - 1075 starting_frame; 1076 } 1077 1078 /* Modify the status bit and halt this QH. */ 1079 Sync_QH_QTD_Pool(ehcip); 1080 1081 status = Get_QH(qh->qh_status); 1082 1083 for (i = 0; i < EHCI_NUM_INTR_QH_LISTS; i++) { 1084 Set_QH(qh->qh_status, 1085 ((Get_QH(qh->qh_status) & 1086 ~(EHCI_QH_STS_ACTIVE)) | EHCI_QH_STS_HALTED)); 1087 1088 Sync_QH_QTD_Pool(ehcip); 1089 1090 (void) ehci_wait_for_sof(ehcip); 1091 Sync_QH_QTD_Pool(ehcip); 1092 1093 if (Get_QH(qh->qh_status) & EHCI_QH_STS_HALTED) { 1094 1095 break; 1096 } 1097 } 1098 1099 Sync_QH_QTD_Pool(ehcip); 1100 1101 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 1102 "ehci_halt_fls_intr_qh: qh=0x%p frames past=%d, status=0x%x, 0x%x", 1103 qh, ehci_get_current_frame_number(ehcip) - starting_frame, 1104 status, Get_QH(qh->qh_status)); 1105 } 1106 1107 1108 /* 1109 * ehci_remove_qh: 1110 * 1111 * Remove the Endpoint Descriptor (QH) from the Host Controller's appropriate 1112 * endpoint list. 1113 */ 1114 void 1115 ehci_remove_qh( 1116 ehci_state_t *ehcip, 1117 ehci_pipe_private_t *pp, 1118 boolean_t reclaim) 1119 { 1120 uchar_t attributes; 1121 1122 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 1123 1124 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 1125 "ehci_remove_qh: qh=0x%p", pp->pp_qh); 1126 1127 attributes = pp->pp_pipe_handle->p_ep.bmAttributes & USB_EP_ATTR_MASK; 1128 1129 switch (attributes) { 1130 case USB_EP_ATTR_CONTROL: 1131 case USB_EP_ATTR_BULK: 1132 ehci_remove_async_qh(ehcip, pp, reclaim); 1133 ehcip->ehci_open_async_count--; 1134 break; 1135 case USB_EP_ATTR_INTR: 1136 ehci_remove_intr_qh(ehcip, pp, reclaim); 1137 ehcip->ehci_open_periodic_count--; 1138 break; 1139 case USB_EP_ATTR_ISOCH: 1140 /* ISOCH does not use QH, don't do anything but update count */ 1141 ehcip->ehci_open_periodic_count--; 1142 break; 1143 } 1144 ehci_toggle_scheduler(ehcip); 1145 } 1146 1147 1148 /* 1149 * ehci_remove_async_qh: 1150 * 1151 * Remove a control/bulk endpoint into the Host Controller's (HC) 1152 * Asynchronous schedule endpoint list. 1153 */ 1154 static void 1155 ehci_remove_async_qh( 1156 ehci_state_t *ehcip, 1157 ehci_pipe_private_t *pp, 1158 boolean_t reclaim) 1159 { 1160 ehci_qh_t *qh = pp->pp_qh; /* qh to be removed */ 1161 ehci_qh_t *prev_qh, *next_qh; 1162 1163 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 1164 "ehci_remove_async_qh:"); 1165 1166 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 1167 1168 prev_qh = ehci_qh_iommu_to_cpu(ehcip, 1169 Get_QH(qh->qh_prev) & EHCI_QH_LINK_PTR); 1170 next_qh = ehci_qh_iommu_to_cpu(ehcip, 1171 Get_QH(qh->qh_link_ptr) & EHCI_QH_LINK_PTR); 1172 1173 /* Make sure this QH is in the list */ 1174 ASSERT(prev_qh != NULL); 1175 1176 /* 1177 * If next QH and current QH are the same, then this is the last 1178 * QH on the Asynchronous Schedule list. 1179 */ 1180 if (qh == next_qh) { 1181 ASSERT(Get_QH(qh->qh_ctrl) & EHCI_QH_CTRL_RECLAIM_HEAD); 1182 /* 1183 * Null our pointer to the async sched list, but do not 1184 * touch the host controller's list_addr. 1185 */ 1186 ehcip->ehci_head_of_async_sched_list = NULL; 1187 ASSERT(ehcip->ehci_open_async_count == 1); 1188 } else { 1189 /* If this QH is the HEAD then find another one to replace it */ 1190 if (ehcip->ehci_head_of_async_sched_list == qh) { 1191 1192 ASSERT(Get_QH(qh->qh_ctrl) & EHCI_QH_CTRL_RECLAIM_HEAD); 1193 ehcip->ehci_head_of_async_sched_list = next_qh; 1194 Set_QH(next_qh->qh_ctrl, 1195 Get_QH(next_qh->qh_ctrl) | 1196 EHCI_QH_CTRL_RECLAIM_HEAD); 1197 } 1198 Set_QH(prev_qh->qh_link_ptr, Get_QH(qh->qh_link_ptr)); 1199 Set_QH(next_qh->qh_prev, Get_QH(qh->qh_prev)); 1200 } 1201 1202 /* qh_prev to indicate it is no longer in the circular list */ 1203 Set_QH(qh->qh_prev, NULL); 1204 1205 if (reclaim) { 1206 ehci_insert_qh_on_reclaim_list(ehcip, pp); 1207 } 1208 } 1209 1210 1211 /* 1212 * ehci_remove_intr_qh: 1213 * 1214 * Set up an interrupt endpoint to be removed from the Host Controller's (HC) 1215 * interrupt lattice tree. The Endpoint Descriptor (QH) will be freed in the 1216 * interrupt handler. 1217 */ 1218 static void 1219 ehci_remove_intr_qh( 1220 ehci_state_t *ehcip, 1221 ehci_pipe_private_t *pp, 1222 boolean_t reclaim) 1223 { 1224 ehci_qh_t *qh = pp->pp_qh; /* qh to be removed */ 1225 ehci_qh_t *prev_qh, *next_qh; 1226 1227 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 1228 "ehci_remove_intr_qh:"); 1229 1230 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 1231 1232 prev_qh = ehci_qh_iommu_to_cpu(ehcip, Get_QH(qh->qh_prev)); 1233 next_qh = ehci_qh_iommu_to_cpu(ehcip, 1234 Get_QH(qh->qh_link_ptr) & EHCI_QH_LINK_PTR); 1235 1236 /* Make sure this QH is in the list */ 1237 ASSERT(prev_qh != NULL); 1238 1239 if (next_qh) { 1240 /* Update previous qh's link pointer */ 1241 Set_QH(prev_qh->qh_link_ptr, Get_QH(qh->qh_link_ptr)); 1242 1243 if (Get_QH(next_qh->qh_state) != EHCI_QH_STATIC) { 1244 /* Set the previous pointer of the next one */ 1245 Set_QH(next_qh->qh_prev, Get_QH(qh->qh_prev)); 1246 } 1247 } else { 1248 /* Update previous qh's link pointer */ 1249 Set_QH(prev_qh->qh_link_ptr, 1250 (Get_QH(qh->qh_link_ptr) | EHCI_QH_LINK_PTR_VALID)); 1251 } 1252 1253 /* qh_prev to indicate it is no longer in the circular list */ 1254 Set_QH(qh->qh_prev, NULL); 1255 1256 if (reclaim) { 1257 ehci_insert_qh_on_reclaim_list(ehcip, pp); 1258 } 1259 } 1260 1261 1262 /* 1263 * ehci_insert_qh_on_reclaim_list: 1264 * 1265 * Insert Endpoint onto the reclaim list 1266 */ 1267 static void 1268 ehci_insert_qh_on_reclaim_list( 1269 ehci_state_t *ehcip, 1270 ehci_pipe_private_t *pp) 1271 { 1272 ehci_qh_t *qh = pp->pp_qh; /* qh to be removed */ 1273 ehci_qh_t *next_qh, *prev_qh; 1274 usb_frame_number_t frame_number; 1275 1276 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 1277 1278 /* 1279 * Read current usb frame number and add appropriate number of 1280 * usb frames needs to wait before reclaiming current endpoint. 1281 */ 1282 frame_number = 1283 ehci_get_current_frame_number(ehcip) + MAX_SOF_WAIT_COUNT; 1284 1285 /* Store 32-bit ID */ 1286 Set_QH(qh->qh_reclaim_frame, 1287 ((uint32_t)(EHCI_GET_ID((void *)(uintptr_t)frame_number)))); 1288 1289 /* Insert the endpoint onto the reclamation list */ 1290 if (ehcip->ehci_reclaim_list) { 1291 next_qh = ehcip->ehci_reclaim_list; 1292 1293 while (next_qh) { 1294 prev_qh = next_qh; 1295 next_qh = ehci_qh_iommu_to_cpu(ehcip, 1296 Get_QH(next_qh->qh_reclaim_next)); 1297 } 1298 1299 Set_QH(prev_qh->qh_reclaim_next, 1300 ehci_qh_cpu_to_iommu(ehcip, qh)); 1301 } else { 1302 ehcip->ehci_reclaim_list = qh; 1303 } 1304 1305 ASSERT(Get_QH(qh->qh_reclaim_next) == NULL); 1306 } 1307 1308 1309 /* 1310 * ehci_deallocate_qh: 1311 * 1312 * Deallocate a Host Controller's (HC) Endpoint Descriptor (QH). 1313 * 1314 * NOTE: This function is also called from POLLED MODE. 1315 */ 1316 void 1317 ehci_deallocate_qh( 1318 ehci_state_t *ehcip, 1319 ehci_qh_t *old_qh) 1320 { 1321 ehci_qtd_t *first_dummy_qtd, *second_dummy_qtd; 1322 1323 USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 1324 "ehci_deallocate_qh:"); 1325 1326 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 1327 1328 first_dummy_qtd = ehci_qtd_iommu_to_cpu(ehcip, 1329 (Get_QH(old_qh->qh_next_qtd) & EHCI_QH_NEXT_QTD_PTR)); 1330 1331 if (first_dummy_qtd) { 1332 ASSERT(Get_QTD(first_dummy_qtd->qtd_state) == EHCI_QTD_DUMMY); 1333 1334 second_dummy_qtd = ehci_qtd_iommu_to_cpu(ehcip, 1335 Get_QTD(first_dummy_qtd->qtd_next_qtd)); 1336 1337 if (second_dummy_qtd) { 1338 ASSERT(Get_QTD(second_dummy_qtd->qtd_state) == 1339 EHCI_QTD_DUMMY); 1340 1341 ehci_deallocate_qtd(ehcip, second_dummy_qtd); 1342 } 1343 1344 ehci_deallocate_qtd(ehcip, first_dummy_qtd); 1345 } 1346 1347 USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 1348 "ehci_deallocate_qh: Deallocated 0x%p", (void *)old_qh); 1349 1350 bzero((void *)old_qh, sizeof (ehci_qh_t)); 1351 Set_QH(old_qh->qh_state, EHCI_QH_FREE); 1352 } 1353 1354 1355 /* 1356 * ehci_qh_cpu_to_iommu: 1357 * 1358 * This function converts for the given Endpoint Descriptor (QH) CPU address 1359 * to IO address. 1360 * 1361 * NOTE: This function is also called from POLLED MODE. 1362 */ 1363 uint32_t 1364 ehci_qh_cpu_to_iommu( 1365 ehci_state_t *ehcip, 1366 ehci_qh_t *addr) 1367 { 1368 uint32_t qh; 1369 1370 qh = (uint32_t)ehcip->ehci_qh_pool_cookie.dmac_address + 1371 (uint32_t)((uintptr_t)addr - (uintptr_t)(ehcip->ehci_qh_pool_addr)); 1372 1373 ASSERT(qh >= ehcip->ehci_qh_pool_cookie.dmac_address); 1374 ASSERT(qh <= ehcip->ehci_qh_pool_cookie.dmac_address + 1375 sizeof (ehci_qh_t) * ehci_qh_pool_size); 1376 1377 return (qh); 1378 } 1379 1380 1381 /* 1382 * ehci_qh_iommu_to_cpu: 1383 * 1384 * This function converts for the given Endpoint Descriptor (QH) IO address 1385 * to CPU address. 1386 */ 1387 ehci_qh_t * 1388 ehci_qh_iommu_to_cpu( 1389 ehci_state_t *ehcip, 1390 uintptr_t addr) 1391 { 1392 ehci_qh_t *qh; 1393 1394 if (addr == NULL) { 1395 1396 return (NULL); 1397 } 1398 1399 qh = (ehci_qh_t *)((uintptr_t) 1400 (addr - ehcip->ehci_qh_pool_cookie.dmac_address) + 1401 (uintptr_t)ehcip->ehci_qh_pool_addr); 1402 1403 ASSERT(qh >= ehcip->ehci_qh_pool_addr); 1404 ASSERT((uintptr_t)qh <= (uintptr_t)ehcip->ehci_qh_pool_addr + 1405 (uintptr_t)(sizeof (ehci_qh_t) * ehci_qh_pool_size)); 1406 1407 return (qh); 1408 } 1409 1410 1411 /* 1412 * Transfer Descriptor manipulations functions 1413 */ 1414 1415 /* 1416 * ehci_initialize_dummy: 1417 * 1418 * An Endpoint Descriptor (QH) has a dummy Transfer Descriptor (QTD) on the 1419 * end of its QTD list. Initially, both the head and tail pointers of the QH 1420 * point to the dummy QTD. 1421 */ 1422 static int 1423 ehci_initialize_dummy( 1424 ehci_state_t *ehcip, 1425 ehci_qh_t *qh) 1426 { 1427 ehci_qtd_t *first_dummy_qtd, *second_dummy_qtd; 1428 1429 /* Allocate first dummy QTD */ 1430 first_dummy_qtd = ehci_allocate_qtd_from_pool(ehcip); 1431 1432 if (first_dummy_qtd == NULL) { 1433 return (USB_NO_RESOURCES); 1434 } 1435 1436 /* Allocate second dummy QTD */ 1437 second_dummy_qtd = ehci_allocate_qtd_from_pool(ehcip); 1438 1439 if (second_dummy_qtd == NULL) { 1440 /* Deallocate first dummy QTD */ 1441 ehci_deallocate_qtd(ehcip, first_dummy_qtd); 1442 1443 return (USB_NO_RESOURCES); 1444 } 1445 1446 /* Next QTD pointer of an QH point to this new dummy QTD */ 1447 Set_QH(qh->qh_next_qtd, ehci_qtd_cpu_to_iommu(ehcip, 1448 first_dummy_qtd) & EHCI_QH_NEXT_QTD_PTR); 1449 1450 /* Set qh's dummy qtd field */ 1451 Set_QH(qh->qh_dummy_qtd, ehci_qtd_cpu_to_iommu(ehcip, first_dummy_qtd)); 1452 1453 /* Set first_dummy's next qtd pointer */ 1454 Set_QTD(first_dummy_qtd->qtd_next_qtd, 1455 ehci_qtd_cpu_to_iommu(ehcip, second_dummy_qtd)); 1456 1457 return (USB_SUCCESS); 1458 } 1459 1460 /* 1461 * ehci_allocate_ctrl_resources: 1462 * 1463 * Calculates the number of tds necessary for a ctrl transfer, and allocates 1464 * all the resources necessary. 1465 * 1466 * Returns NULL if there is insufficient resources otherwise TW. 1467 */ 1468 ehci_trans_wrapper_t * 1469 ehci_allocate_ctrl_resources( 1470 ehci_state_t *ehcip, 1471 ehci_pipe_private_t *pp, 1472 usb_ctrl_req_t *ctrl_reqp, 1473 usb_flags_t usb_flags) 1474 { 1475 size_t qtd_count = 2; 1476 size_t ctrl_buf_size; 1477 ehci_trans_wrapper_t *tw; 1478 1479 /* Add one more td for data phase */ 1480 if (ctrl_reqp->ctrl_wLength) { 1481 qtd_count += 1; 1482 } 1483 1484 /* 1485 * If we have a control data phase, the data buffer starts 1486 * on the next 4K page boundary. So the TW buffer is allocated 1487 * to be larger than required. The buffer in the range of 1488 * [SETUP_SIZE, EHCI_MAX_QTD_BUF_SIZE) is just for padding 1489 * and not to be transferred. 1490 */ 1491 if (ctrl_reqp->ctrl_wLength) { 1492 ctrl_buf_size = EHCI_MAX_QTD_BUF_SIZE + 1493 ctrl_reqp->ctrl_wLength; 1494 } else { 1495 ctrl_buf_size = SETUP_SIZE; 1496 } 1497 1498 tw = ehci_allocate_tw_resources(ehcip, pp, ctrl_buf_size, 1499 usb_flags, qtd_count); 1500 1501 return (tw); 1502 } 1503 1504 /* 1505 * ehci_insert_ctrl_req: 1506 * 1507 * Create a Transfer Descriptor (QTD) and a data buffer for a control endpoint. 1508 */ 1509 /* ARGSUSED */ 1510 void 1511 ehci_insert_ctrl_req( 1512 ehci_state_t *ehcip, 1513 usba_pipe_handle_data_t *ph, 1514 usb_ctrl_req_t *ctrl_reqp, 1515 ehci_trans_wrapper_t *tw, 1516 usb_flags_t usb_flags) 1517 { 1518 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 1519 uchar_t bmRequestType = ctrl_reqp->ctrl_bmRequestType; 1520 uchar_t bRequest = ctrl_reqp->ctrl_bRequest; 1521 uint16_t wValue = ctrl_reqp->ctrl_wValue; 1522 uint16_t wIndex = ctrl_reqp->ctrl_wIndex; 1523 uint16_t wLength = ctrl_reqp->ctrl_wLength; 1524 mblk_t *data = ctrl_reqp->ctrl_data; 1525 uint32_t ctrl = 0; 1526 uint8_t setup_packet[8]; 1527 1528 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 1529 "ehci_insert_ctrl_req:"); 1530 1531 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 1532 1533 /* 1534 * Save current control request pointer and timeout values 1535 * in transfer wrapper. 1536 */ 1537 tw->tw_curr_xfer_reqp = (usb_opaque_t)ctrl_reqp; 1538 tw->tw_timeout = ctrl_reqp->ctrl_timeout ? 1539 ctrl_reqp->ctrl_timeout : EHCI_DEFAULT_XFER_TIMEOUT; 1540 1541 /* 1542 * Initialize the callback and any callback data for when 1543 * the qtd completes. 1544 */ 1545 tw->tw_handle_qtd = ehci_handle_ctrl_qtd; 1546 tw->tw_handle_callback_value = NULL; 1547 1548 /* 1549 * swap the setup bytes where necessary since we specified 1550 * NEVERSWAP 1551 */ 1552 setup_packet[0] = bmRequestType; 1553 setup_packet[1] = bRequest; 1554 setup_packet[2] = wValue; 1555 setup_packet[3] = wValue >> 8; 1556 setup_packet[4] = wIndex; 1557 setup_packet[5] = wIndex >> 8; 1558 setup_packet[6] = wLength; 1559 setup_packet[7] = wLength >> 8; 1560 1561 bcopy(setup_packet, tw->tw_buf, SETUP_SIZE); 1562 1563 Sync_IO_Buffer_for_device(tw->tw_dmahandle, SETUP_SIZE); 1564 1565 ctrl = (EHCI_QTD_CTRL_DATA_TOGGLE_0 | EHCI_QTD_CTRL_SETUP_PID); 1566 1567 /* 1568 * The QTD's are placed on the QH one at a time. 1569 * Once this QTD is placed on the done list, the 1570 * data or status phase QTD will be enqueued. 1571 */ 1572 (void) ehci_insert_qtd(ehcip, ctrl, 0, SETUP_SIZE, 1573 EHCI_CTRL_SETUP_PHASE, pp, tw); 1574 1575 USB_DPRINTF_L3(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 1576 "ehci_insert_ctrl_req: pp 0x%p", (void *)pp); 1577 1578 /* 1579 * If this control transfer has a data phase, record the 1580 * direction. If the data phase is an OUT transaction, 1581 * copy the data into the buffer of the transfer wrapper. 1582 */ 1583 if (wLength != 0) { 1584 /* There is a data stage. Find the direction */ 1585 if (bmRequestType & USB_DEV_REQ_DEV_TO_HOST) { 1586 tw->tw_direction = EHCI_QTD_CTRL_IN_PID; 1587 } else { 1588 tw->tw_direction = EHCI_QTD_CTRL_OUT_PID; 1589 1590 /* Copy the data into the message */ 1591 bcopy(data->b_rptr, tw->tw_buf + EHCI_MAX_QTD_BUF_SIZE, 1592 wLength); 1593 1594 Sync_IO_Buffer_for_device(tw->tw_dmahandle, 1595 wLength + EHCI_MAX_QTD_BUF_SIZE); 1596 } 1597 1598 ctrl = (EHCI_QTD_CTRL_DATA_TOGGLE_1 | tw->tw_direction); 1599 1600 /* 1601 * Create the QTD. If this is an OUT transaction, 1602 * the data is already in the buffer of the TW. 1603 * The transfer should start from EHCI_MAX_QTD_BUF_SIZE 1604 * which is 4K aligned, though the ctrl phase only 1605 * transfers a length of SETUP_SIZE. The padding data 1606 * in the TW buffer are discarded. 1607 */ 1608 (void) ehci_insert_qtd(ehcip, ctrl, EHCI_MAX_QTD_BUF_SIZE, 1609 tw->tw_length - EHCI_MAX_QTD_BUF_SIZE, 1610 EHCI_CTRL_DATA_PHASE, pp, tw); 1611 1612 /* 1613 * The direction of the STATUS QTD depends on 1614 * the direction of the transfer. 1615 */ 1616 if (tw->tw_direction == EHCI_QTD_CTRL_IN_PID) { 1617 ctrl = (EHCI_QTD_CTRL_DATA_TOGGLE_1| 1618 EHCI_QTD_CTRL_OUT_PID | 1619 EHCI_QTD_CTRL_INTR_ON_COMPLETE); 1620 } else { 1621 ctrl = (EHCI_QTD_CTRL_DATA_TOGGLE_1| 1622 EHCI_QTD_CTRL_IN_PID | 1623 EHCI_QTD_CTRL_INTR_ON_COMPLETE); 1624 } 1625 } else { 1626 /* 1627 * There is no data stage, then initiate 1628 * status phase from the host. 1629 */ 1630 ctrl = (EHCI_QTD_CTRL_DATA_TOGGLE_1 | 1631 EHCI_QTD_CTRL_IN_PID | 1632 EHCI_QTD_CTRL_INTR_ON_COMPLETE); 1633 } 1634 1635 1636 (void) ehci_insert_qtd(ehcip, ctrl, 0, 0, 1637 EHCI_CTRL_STATUS_PHASE, pp, tw); 1638 1639 /* Start the timer for this control transfer */ 1640 ehci_start_xfer_timer(ehcip, pp, tw); 1641 } 1642 1643 1644 /* 1645 * ehci_allocate_bulk_resources: 1646 * 1647 * Calculates the number of tds necessary for a ctrl transfer, and allocates 1648 * all the resources necessary. 1649 * 1650 * Returns NULL if there is insufficient resources otherwise TW. 1651 */ 1652 ehci_trans_wrapper_t * 1653 ehci_allocate_bulk_resources( 1654 ehci_state_t *ehcip, 1655 ehci_pipe_private_t *pp, 1656 usb_bulk_req_t *bulk_reqp, 1657 usb_flags_t usb_flags) 1658 { 1659 size_t qtd_count = 0; 1660 ehci_trans_wrapper_t *tw; 1661 1662 /* Check the size of bulk request */ 1663 if (bulk_reqp->bulk_len > EHCI_MAX_BULK_XFER_SIZE) { 1664 1665 USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 1666 "ehci_allocate_bulk_resources: Bulk request size 0x%x is " 1667 "more than 0x%x", bulk_reqp->bulk_len, 1668 EHCI_MAX_BULK_XFER_SIZE); 1669 1670 return (NULL); 1671 } 1672 1673 /* Get the required bulk packet size */ 1674 qtd_count = bulk_reqp->bulk_len / EHCI_MAX_QTD_XFER_SIZE; 1675 if (bulk_reqp->bulk_len % EHCI_MAX_QTD_XFER_SIZE || 1676 bulk_reqp->bulk_len == 0) { 1677 qtd_count += 1; 1678 } 1679 1680 tw = ehci_allocate_tw_resources(ehcip, pp, bulk_reqp->bulk_len, 1681 usb_flags, qtd_count); 1682 1683 return (tw); 1684 } 1685 1686 /* 1687 * ehci_insert_bulk_req: 1688 * 1689 * Create a Transfer Descriptor (QTD) and a data buffer for a bulk 1690 * endpoint. 1691 */ 1692 /* ARGSUSED */ 1693 void 1694 ehci_insert_bulk_req( 1695 ehci_state_t *ehcip, 1696 usba_pipe_handle_data_t *ph, 1697 usb_bulk_req_t *bulk_reqp, 1698 ehci_trans_wrapper_t *tw, 1699 usb_flags_t flags) 1700 { 1701 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 1702 uint_t bulk_pkt_size, count; 1703 size_t residue = 0, len = 0; 1704 uint32_t ctrl = 0; 1705 int pipe_dir; 1706 1707 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 1708 "ehci_insert_bulk_req: bulk_reqp = 0x%p flags = 0x%x", 1709 bulk_reqp, flags); 1710 1711 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 1712 1713 /* Get the bulk pipe direction */ 1714 pipe_dir = ph->p_ep.bEndpointAddress & USB_EP_DIR_MASK; 1715 1716 /* Get the required bulk packet size */ 1717 bulk_pkt_size = min(bulk_reqp->bulk_len, EHCI_MAX_QTD_XFER_SIZE); 1718 1719 if (bulk_pkt_size) { 1720 residue = tw->tw_length % bulk_pkt_size; 1721 } 1722 1723 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 1724 "ehci_insert_bulk_req: bulk_pkt_size = %d", bulk_pkt_size); 1725 1726 /* 1727 * Save current bulk request pointer and timeout values 1728 * in transfer wrapper. 1729 */ 1730 tw->tw_curr_xfer_reqp = (usb_opaque_t)bulk_reqp; 1731 tw->tw_timeout = bulk_reqp->bulk_timeout; 1732 1733 /* 1734 * Initialize the callback and any callback 1735 * data required when the qtd completes. 1736 */ 1737 tw->tw_handle_qtd = ehci_handle_bulk_qtd; 1738 tw->tw_handle_callback_value = NULL; 1739 1740 tw->tw_direction = (pipe_dir == USB_EP_DIR_OUT) ? 1741 EHCI_QTD_CTRL_OUT_PID : EHCI_QTD_CTRL_IN_PID; 1742 1743 if (tw->tw_direction == EHCI_QTD_CTRL_OUT_PID) { 1744 1745 if (bulk_reqp->bulk_len) { 1746 ASSERT(bulk_reqp->bulk_data != NULL); 1747 1748 bcopy(bulk_reqp->bulk_data->b_rptr, tw->tw_buf, 1749 bulk_reqp->bulk_len); 1750 1751 Sync_IO_Buffer_for_device(tw->tw_dmahandle, 1752 bulk_reqp->bulk_len); 1753 } 1754 } 1755 1756 ctrl = tw->tw_direction; 1757 1758 /* Insert all the bulk QTDs */ 1759 for (count = 0; count < tw->tw_num_qtds; count++) { 1760 1761 /* Check for last qtd */ 1762 if (count == (tw->tw_num_qtds - 1)) { 1763 1764 ctrl |= EHCI_QTD_CTRL_INTR_ON_COMPLETE; 1765 1766 /* Check for inserting residue data */ 1767 if (residue) { 1768 bulk_pkt_size = residue; 1769 } 1770 } 1771 1772 /* Insert the QTD onto the endpoint */ 1773 (void) ehci_insert_qtd(ehcip, ctrl, len, bulk_pkt_size, 1774 0, pp, tw); 1775 1776 len = len + bulk_pkt_size; 1777 } 1778 1779 /* Start the timer for this bulk transfer */ 1780 ehci_start_xfer_timer(ehcip, pp, tw); 1781 } 1782 1783 1784 /* 1785 * ehci_start_periodic_pipe_polling: 1786 * 1787 * NOTE: This function is also called from POLLED MODE. 1788 */ 1789 int 1790 ehci_start_periodic_pipe_polling( 1791 ehci_state_t *ehcip, 1792 usba_pipe_handle_data_t *ph, 1793 usb_opaque_t periodic_in_reqp, 1794 usb_flags_t flags) 1795 { 1796 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 1797 usb_ep_descr_t *eptd = &ph->p_ep; 1798 int error = USB_SUCCESS; 1799 1800 USB_DPRINTF_L4(PRINT_MASK_HCDI, ehcip->ehci_log_hdl, 1801 "ehci_start_periodic_pipe_polling: ep%d", 1802 ph->p_ep.bEndpointAddress & USB_EP_NUM_MASK); 1803 1804 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 1805 1806 /* 1807 * Check and handle start polling on root hub interrupt pipe. 1808 */ 1809 if ((ph->p_usba_device->usb_addr == ROOT_HUB_ADDR) && 1810 ((eptd->bmAttributes & USB_EP_ATTR_MASK) == 1811 USB_EP_ATTR_INTR)) { 1812 1813 error = ehci_handle_root_hub_pipe_start_intr_polling(ph, 1814 (usb_intr_req_t *)periodic_in_reqp, flags); 1815 1816 return (error); 1817 } 1818 1819 switch (pp->pp_state) { 1820 case EHCI_PIPE_STATE_IDLE: 1821 /* Save the Original client's Periodic IN request */ 1822 pp->pp_client_periodic_in_reqp = periodic_in_reqp; 1823 1824 /* 1825 * This pipe is uninitialized or if a valid QTD is 1826 * not found then insert a QTD on the interrupt IN 1827 * endpoint. 1828 */ 1829 error = ehci_start_pipe_polling(ehcip, ph, flags); 1830 1831 if (error != USB_SUCCESS) { 1832 USB_DPRINTF_L2(PRINT_MASK_INTR, 1833 ehcip->ehci_log_hdl, 1834 "ehci_start_periodic_pipe_polling: " 1835 "Start polling failed"); 1836 1837 pp->pp_client_periodic_in_reqp = NULL; 1838 1839 return (error); 1840 } 1841 1842 USB_DPRINTF_L3(PRINT_MASK_INTR, ehcip->ehci_log_hdl, 1843 "ehci_start_periodic_pipe_polling: PP = 0x%p", pp); 1844 1845 #ifdef DEBUG 1846 switch (eptd->bmAttributes & USB_EP_ATTR_MASK) { 1847 case USB_EP_ATTR_INTR: 1848 ASSERT((pp->pp_tw_head != NULL) && 1849 (pp->pp_tw_tail != NULL)); 1850 break; 1851 case USB_EP_ATTR_ISOCH: 1852 ASSERT((pp->pp_itw_head != NULL) && 1853 (pp->pp_itw_tail != NULL)); 1854 break; 1855 } 1856 #endif 1857 1858 break; 1859 case EHCI_PIPE_STATE_ACTIVE: 1860 USB_DPRINTF_L2(PRINT_MASK_INTR, 1861 ehcip->ehci_log_hdl, 1862 "ehci_start_periodic_pipe_polling: " 1863 "Polling is already in progress"); 1864 1865 error = USB_FAILURE; 1866 break; 1867 case EHCI_PIPE_STATE_ERROR: 1868 USB_DPRINTF_L2(PRINT_MASK_INTR, 1869 ehcip->ehci_log_hdl, 1870 "ehci_start_periodic_pipe_polling: " 1871 "Pipe is halted and perform reset" 1872 "before restart polling"); 1873 1874 error = USB_FAILURE; 1875 break; 1876 default: 1877 USB_DPRINTF_L2(PRINT_MASK_INTR, 1878 ehcip->ehci_log_hdl, 1879 "ehci_start_periodic_pipe_polling: " 1880 "Undefined state"); 1881 1882 error = USB_FAILURE; 1883 break; 1884 } 1885 1886 return (error); 1887 } 1888 1889 1890 /* 1891 * ehci_start_pipe_polling: 1892 * 1893 * Insert the number of periodic requests corresponding to polling 1894 * interval as calculated during pipe open. 1895 */ 1896 static int 1897 ehci_start_pipe_polling( 1898 ehci_state_t *ehcip, 1899 usba_pipe_handle_data_t *ph, 1900 usb_flags_t flags) 1901 { 1902 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 1903 usb_ep_descr_t *eptd = &ph->p_ep; 1904 int error = USB_FAILURE; 1905 1906 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 1907 "ehci_start_pipe_polling:"); 1908 1909 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 1910 1911 /* 1912 * For the start polling, pp_max_periodic_req_cnt will be zero 1913 * and for the restart polling request, it will be non zero. 1914 * 1915 * In case of start polling request, find out number of requests 1916 * required for the Interrupt IN endpoints corresponding to the 1917 * endpoint polling interval. For Isochronous IN endpoints, it is 1918 * always fixed since its polling interval will be one ms. 1919 */ 1920 if (pp->pp_max_periodic_req_cnt == 0) { 1921 1922 ehci_set_periodic_pipe_polling(ehcip, ph); 1923 } 1924 1925 ASSERT(pp->pp_max_periodic_req_cnt != 0); 1926 1927 switch (eptd->bmAttributes & USB_EP_ATTR_MASK) { 1928 case USB_EP_ATTR_INTR: 1929 error = ehci_start_intr_polling(ehcip, ph, flags); 1930 break; 1931 case USB_EP_ATTR_ISOCH: 1932 error = ehci_start_isoc_polling(ehcip, ph, flags); 1933 break; 1934 } 1935 1936 return (error); 1937 } 1938 1939 static int 1940 ehci_start_intr_polling( 1941 ehci_state_t *ehcip, 1942 usba_pipe_handle_data_t *ph, 1943 usb_flags_t flags) 1944 { 1945 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 1946 ehci_trans_wrapper_t *tw_list, *tw; 1947 int i, total_tws; 1948 int error = USB_SUCCESS; 1949 1950 /* Allocate all the necessary resources for the IN transfer */ 1951 tw_list = NULL; 1952 total_tws = pp->pp_max_periodic_req_cnt - pp->pp_cur_periodic_req_cnt; 1953 for (i = 0; i < total_tws; i += 1) { 1954 tw = ehci_allocate_intr_resources(ehcip, ph, NULL, flags); 1955 if (tw == NULL) { 1956 error = USB_NO_RESOURCES; 1957 /* There are not enough resources, deallocate the TWs */ 1958 tw = tw_list; 1959 while (tw != NULL) { 1960 tw_list = tw->tw_next; 1961 ehci_deallocate_intr_in_resource( 1962 ehcip, pp, tw); 1963 ehci_deallocate_tw(ehcip, pp, tw); 1964 tw = tw_list; 1965 } 1966 1967 return (error); 1968 } else { 1969 if (tw_list == NULL) { 1970 tw_list = tw; 1971 } 1972 } 1973 } 1974 1975 while (pp->pp_cur_periodic_req_cnt < pp->pp_max_periodic_req_cnt) { 1976 1977 USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 1978 "ehci_start_pipe_polling: max = %d curr = %d tw = %p:", 1979 pp->pp_max_periodic_req_cnt, pp->pp_cur_periodic_req_cnt, 1980 tw_list); 1981 1982 tw = tw_list; 1983 tw_list = tw->tw_next; 1984 1985 ehci_insert_intr_req(ehcip, pp, tw, flags); 1986 1987 pp->pp_cur_periodic_req_cnt++; 1988 } 1989 1990 return (error); 1991 } 1992 1993 1994 /* 1995 * ehci_set_periodic_pipe_polling: 1996 * 1997 * Calculate the number of periodic requests needed corresponding to the 1998 * interrupt IN endpoints polling interval. Table below gives the number 1999 * of periodic requests needed for the interrupt IN endpoints according 2000 * to endpoint polling interval. 2001 * 2002 * Polling interval Number of periodic requests 2003 * 2004 * 1ms 4 2005 * 2ms 2 2006 * 4ms to 32ms 1 2007 */ 2008 static void 2009 ehci_set_periodic_pipe_polling( 2010 ehci_state_t *ehcip, 2011 usba_pipe_handle_data_t *ph) 2012 { 2013 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 2014 usb_ep_descr_t *endpoint = &ph->p_ep; 2015 uchar_t ep_attr = endpoint->bmAttributes; 2016 uint_t interval; 2017 2018 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 2019 "ehci_set_periodic_pipe_polling:"); 2020 2021 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 2022 2023 pp->pp_cur_periodic_req_cnt = 0; 2024 2025 /* 2026 * Check usb flag whether USB_FLAGS_ONE_TIME_POLL flag is 2027 * set and if so, set pp->pp_max_periodic_req_cnt to one. 2028 */ 2029 if (((ep_attr & USB_EP_ATTR_MASK) == USB_EP_ATTR_INTR) && 2030 (pp->pp_client_periodic_in_reqp)) { 2031 usb_intr_req_t *intr_reqp = (usb_intr_req_t *) 2032 pp->pp_client_periodic_in_reqp; 2033 2034 if (intr_reqp->intr_attributes & 2035 USB_ATTRS_ONE_XFER) { 2036 2037 pp->pp_max_periodic_req_cnt = EHCI_INTR_XMS_REQS; 2038 2039 return; 2040 } 2041 } 2042 2043 mutex_enter(&ph->p_usba_device->usb_mutex); 2044 2045 /* 2046 * The ehci_adjust_polling_interval function will not fail 2047 * at this instance since bandwidth allocation is already 2048 * done. Here we are getting only the periodic interval. 2049 */ 2050 interval = ehci_adjust_polling_interval(ehcip, endpoint, 2051 ph->p_usba_device->usb_port_status); 2052 2053 mutex_exit(&ph->p_usba_device->usb_mutex); 2054 2055 switch (interval) { 2056 case EHCI_INTR_1MS_POLL: 2057 pp->pp_max_periodic_req_cnt = EHCI_INTR_1MS_REQS; 2058 break; 2059 case EHCI_INTR_2MS_POLL: 2060 pp->pp_max_periodic_req_cnt = EHCI_INTR_2MS_REQS; 2061 break; 2062 default: 2063 pp->pp_max_periodic_req_cnt = EHCI_INTR_XMS_REQS; 2064 break; 2065 } 2066 2067 USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 2068 "ehci_set_periodic_pipe_polling: Max periodic requests = %d", 2069 pp->pp_max_periodic_req_cnt); 2070 } 2071 2072 /* 2073 * ehci_allocate_intr_resources: 2074 * 2075 * Calculates the number of tds necessary for a intr transfer, and allocates 2076 * all the necessary resources. 2077 * 2078 * Returns NULL if there is insufficient resources otherwise TW. 2079 */ 2080 ehci_trans_wrapper_t * 2081 ehci_allocate_intr_resources( 2082 ehci_state_t *ehcip, 2083 usba_pipe_handle_data_t *ph, 2084 usb_intr_req_t *intr_reqp, 2085 usb_flags_t flags) 2086 { 2087 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 2088 int pipe_dir; 2089 size_t qtd_count = 1; 2090 size_t tw_length; 2091 ehci_trans_wrapper_t *tw; 2092 2093 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 2094 "ehci_allocate_intr_resources:"); 2095 2096 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 2097 2098 pipe_dir = ph->p_ep.bEndpointAddress & USB_EP_DIR_MASK; 2099 2100 /* Get the length of interrupt transfer & alloc data */ 2101 if (intr_reqp) { 2102 tw_length = intr_reqp->intr_len; 2103 } else { 2104 ASSERT(pipe_dir == USB_EP_DIR_IN); 2105 tw_length = (pp->pp_client_periodic_in_reqp) ? 2106 (((usb_intr_req_t *)pp-> 2107 pp_client_periodic_in_reqp)->intr_len) : 2108 ph->p_ep.wMaxPacketSize; 2109 } 2110 2111 /* Check the size of interrupt request */ 2112 if (tw_length > EHCI_MAX_QTD_XFER_SIZE) { 2113 2114 USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 2115 "ehci_allocate_intr_resources: Intr request size 0x%lx is " 2116 "more than 0x%x", tw_length, EHCI_MAX_QTD_XFER_SIZE); 2117 2118 return (NULL); 2119 } 2120 2121 if ((tw = ehci_allocate_tw_resources(ehcip, pp, tw_length, flags, 2122 qtd_count)) == NULL) { 2123 2124 return (NULL); 2125 } 2126 2127 if (pipe_dir == USB_EP_DIR_IN) { 2128 if (ehci_allocate_intr_in_resource(ehcip, pp, tw, flags) != 2129 USB_SUCCESS) { 2130 ehci_deallocate_tw(ehcip, pp, tw); 2131 } 2132 tw->tw_direction = EHCI_QTD_CTRL_IN_PID; 2133 } else { 2134 if (tw_length) { 2135 ASSERT(intr_reqp->intr_data != NULL); 2136 2137 /* Copy the data into the buffer */ 2138 bcopy(intr_reqp->intr_data->b_rptr, tw->tw_buf, 2139 intr_reqp->intr_len); 2140 2141 Sync_IO_Buffer_for_device(tw->tw_dmahandle, 2142 intr_reqp->intr_len); 2143 } 2144 2145 tw->tw_curr_xfer_reqp = (usb_opaque_t)intr_reqp; 2146 tw->tw_direction = EHCI_QTD_CTRL_OUT_PID; 2147 } 2148 2149 if (intr_reqp) { 2150 tw->tw_timeout = intr_reqp->intr_timeout; 2151 } 2152 2153 /* 2154 * Initialize the callback and any callback 2155 * data required when the qtd completes. 2156 */ 2157 tw->tw_handle_qtd = ehci_handle_intr_qtd; 2158 tw->tw_handle_callback_value = NULL; 2159 2160 return (tw); 2161 } 2162 2163 2164 /* 2165 * ehci_insert_intr_req: 2166 * 2167 * Insert an Interrupt request into the Host Controller's periodic list. 2168 */ 2169 /* ARGSUSED */ 2170 void 2171 ehci_insert_intr_req( 2172 ehci_state_t *ehcip, 2173 ehci_pipe_private_t *pp, 2174 ehci_trans_wrapper_t *tw, 2175 usb_flags_t flags) 2176 { 2177 uint_t ctrl = 0; 2178 2179 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 2180 2181 ASSERT(tw->tw_curr_xfer_reqp != NULL); 2182 2183 ctrl = (tw->tw_direction | EHCI_QTD_CTRL_INTR_ON_COMPLETE); 2184 2185 /* Insert another interrupt QTD */ 2186 (void) ehci_insert_qtd(ehcip, ctrl, 0, tw->tw_length, 0, pp, tw); 2187 2188 /* Start the timer for this Interrupt transfer */ 2189 ehci_start_xfer_timer(ehcip, pp, tw); 2190 } 2191 2192 2193 /* 2194 * ehci_stop_periodic_pipe_polling: 2195 */ 2196 /* ARGSUSED */ 2197 int 2198 ehci_stop_periodic_pipe_polling( 2199 ehci_state_t *ehcip, 2200 usba_pipe_handle_data_t *ph, 2201 usb_flags_t flags) 2202 { 2203 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 2204 usb_ep_descr_t *eptd = &ph->p_ep; 2205 2206 USB_DPRINTF_L4(PRINT_MASK_HCDI, ehcip->ehci_log_hdl, 2207 "ehci_stop_periodic_pipe_polling: Flags = 0x%x", flags); 2208 2209 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 2210 2211 /* 2212 * Check and handle stop polling on root hub interrupt pipe. 2213 */ 2214 if ((ph->p_usba_device->usb_addr == ROOT_HUB_ADDR) && 2215 ((eptd->bmAttributes & USB_EP_ATTR_MASK) == 2216 USB_EP_ATTR_INTR)) { 2217 2218 ehci_handle_root_hub_pipe_stop_intr_polling(ph, flags); 2219 2220 return (USB_SUCCESS); 2221 } 2222 2223 if (pp->pp_state != EHCI_PIPE_STATE_ACTIVE) { 2224 2225 USB_DPRINTF_L2(PRINT_MASK_HCDI, ehcip->ehci_log_hdl, 2226 "ehci_stop_periodic_pipe_polling: " 2227 "Polling already stopped"); 2228 2229 return (USB_SUCCESS); 2230 } 2231 2232 /* Set pipe state to pipe stop polling */ 2233 pp->pp_state = EHCI_PIPE_STATE_STOP_POLLING; 2234 2235 ehci_pipe_cleanup(ehcip, ph); 2236 2237 return (USB_SUCCESS); 2238 } 2239 2240 2241 /* 2242 * ehci_insert_qtd: 2243 * 2244 * Insert a Transfer Descriptor (QTD) on an Endpoint Descriptor (QH). 2245 * Always returns USB_SUCCESS for now. Once Isoch has been implemented, 2246 * it may return USB_FAILURE. 2247 */ 2248 int 2249 ehci_insert_qtd( 2250 ehci_state_t *ehcip, 2251 uint32_t qtd_ctrl, 2252 size_t qtd_dma_offs, 2253 size_t qtd_length, 2254 uint32_t qtd_ctrl_phase, 2255 ehci_pipe_private_t *pp, 2256 ehci_trans_wrapper_t *tw) 2257 { 2258 ehci_qtd_t *curr_dummy_qtd, *next_dummy_qtd; 2259 ehci_qtd_t *new_dummy_qtd; 2260 ehci_qh_t *qh = pp->pp_qh; 2261 int error = USB_SUCCESS; 2262 2263 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 2264 2265 /* Allocate new dummy QTD */ 2266 new_dummy_qtd = tw->tw_qtd_free_list; 2267 2268 ASSERT(new_dummy_qtd != NULL); 2269 tw->tw_qtd_free_list = ehci_qtd_iommu_to_cpu(ehcip, 2270 Get_QTD(new_dummy_qtd->qtd_tw_next_qtd)); 2271 Set_QTD(new_dummy_qtd->qtd_tw_next_qtd, NULL); 2272 2273 /* Get the current and next dummy QTDs */ 2274 curr_dummy_qtd = ehci_qtd_iommu_to_cpu(ehcip, 2275 Get_QH(qh->qh_dummy_qtd)); 2276 next_dummy_qtd = ehci_qtd_iommu_to_cpu(ehcip, 2277 Get_QTD(curr_dummy_qtd->qtd_next_qtd)); 2278 2279 /* Update QH's dummy qtd field */ 2280 Set_QH(qh->qh_dummy_qtd, ehci_qtd_cpu_to_iommu(ehcip, next_dummy_qtd)); 2281 2282 /* Update next dummy's next qtd pointer */ 2283 Set_QTD(next_dummy_qtd->qtd_next_qtd, 2284 ehci_qtd_cpu_to_iommu(ehcip, new_dummy_qtd)); 2285 2286 /* 2287 * Fill in the current dummy qtd and 2288 * add the new dummy to the end. 2289 */ 2290 ehci_fill_in_qtd(ehcip, curr_dummy_qtd, qtd_ctrl, 2291 qtd_dma_offs, qtd_length, qtd_ctrl_phase, pp, tw); 2292 2293 /* Insert this qtd onto the tw */ 2294 ehci_insert_qtd_on_tw(ehcip, tw, curr_dummy_qtd); 2295 2296 /* 2297 * Insert this qtd onto active qtd list. 2298 * Don't insert polled mode qtd here. 2299 */ 2300 if (pp->pp_flag != EHCI_POLLED_MODE_FLAG) { 2301 /* Insert this qtd onto active qtd list */ 2302 ehci_insert_qtd_into_active_qtd_list(ehcip, curr_dummy_qtd); 2303 } 2304 2305 /* Print qh and qtd */ 2306 ehci_print_qh(ehcip, qh); 2307 ehci_print_qtd(ehcip, curr_dummy_qtd); 2308 2309 return (error); 2310 } 2311 2312 2313 /* 2314 * ehci_allocate_qtd_from_pool: 2315 * 2316 * Allocate a Transfer Descriptor (QTD) from the QTD buffer pool. 2317 */ 2318 static ehci_qtd_t * 2319 ehci_allocate_qtd_from_pool(ehci_state_t *ehcip) 2320 { 2321 int i, ctrl; 2322 ehci_qtd_t *qtd; 2323 2324 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 2325 2326 /* 2327 * Search for a blank Transfer Descriptor (QTD) 2328 * in the QTD buffer pool. 2329 */ 2330 for (i = 0; i < ehci_qtd_pool_size; i ++) { 2331 ctrl = Get_QTD(ehcip->ehci_qtd_pool_addr[i].qtd_state); 2332 if (ctrl == EHCI_QTD_FREE) { 2333 break; 2334 } 2335 } 2336 2337 if (i >= ehci_qtd_pool_size) { 2338 USB_DPRINTF_L2(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 2339 "ehci_allocate_qtd_from_pool: QTD exhausted"); 2340 2341 return (NULL); 2342 } 2343 2344 USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 2345 "ehci_allocate_qtd_from_pool: Allocated %d", i); 2346 2347 /* Create a new dummy for the end of the QTD list */ 2348 qtd = &ehcip->ehci_qtd_pool_addr[i]; 2349 2350 USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 2351 "ehci_allocate_qtd_from_pool: qtd 0x%p", (void *)qtd); 2352 2353 /* Mark the newly allocated QTD as a dummy */ 2354 Set_QTD(qtd->qtd_state, EHCI_QTD_DUMMY); 2355 2356 /* Mark the status of this new QTD to halted state */ 2357 Set_QTD(qtd->qtd_ctrl, EHCI_QTD_CTRL_HALTED_XACT); 2358 2359 /* Disable dummy QTD's next and alternate next pointers */ 2360 Set_QTD(qtd->qtd_next_qtd, EHCI_QTD_NEXT_QTD_PTR_VALID); 2361 Set_QTD(qtd->qtd_alt_next_qtd, EHCI_QTD_ALT_NEXT_QTD_PTR_VALID); 2362 2363 return (qtd); 2364 } 2365 2366 2367 /* 2368 * ehci_fill_in_qtd: 2369 * 2370 * Fill in the fields of a Transfer Descriptor (QTD). 2371 * The "Buffer Pointer" fields of a QTD are retrieved from the TW 2372 * it is associated with. 2373 * 2374 * Note: 2375 * qtd_dma_offs - the starting offset into the TW buffer, where the QTD 2376 * should transfer from. It should be 4K aligned. And when 2377 * a TW has more than one QTDs, the QTDs must be filled in 2378 * increasing order. 2379 * qtd_length - the total bytes to transfer. 2380 */ 2381 /*ARGSUSED*/ 2382 static void 2383 ehci_fill_in_qtd( 2384 ehci_state_t *ehcip, 2385 ehci_qtd_t *qtd, 2386 uint32_t qtd_ctrl, 2387 size_t qtd_dma_offs, 2388 size_t qtd_length, 2389 uint32_t qtd_ctrl_phase, 2390 ehci_pipe_private_t *pp, 2391 ehci_trans_wrapper_t *tw) 2392 { 2393 uint32_t buf_addr; 2394 size_t buf_len = qtd_length; 2395 uint32_t ctrl = qtd_ctrl; 2396 uint_t i = 0; 2397 int rem_len; 2398 2399 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 2400 "ehci_fill_in_qtd: qtd 0x%p ctrl 0x%x bufoffs 0x%lx " 2401 "len 0x%lx", qtd, qtd_ctrl, qtd_dma_offs, qtd_length); 2402 2403 /* Assert that the qtd to be filled in is a dummy */ 2404 ASSERT(Get_QTD(qtd->qtd_state) == EHCI_QTD_DUMMY); 2405 2406 /* Change QTD's state Active */ 2407 Set_QTD(qtd->qtd_state, EHCI_QTD_ACTIVE); 2408 2409 /* Set the total length data transfer */ 2410 ctrl |= (((qtd_length << EHCI_QTD_CTRL_BYTES_TO_XFER_SHIFT) 2411 & EHCI_QTD_CTRL_BYTES_TO_XFER) | EHCI_QTD_CTRL_MAX_ERR_COUNTS); 2412 2413 /* 2414 * QTDs must be filled in increasing DMA offset order. 2415 * tw_dma_offs is initialized to be 0 at TW creation and 2416 * is only increased in this function. 2417 */ 2418 ASSERT(buf_len == 0 || qtd_dma_offs >= tw->tw_dma_offs); 2419 2420 /* 2421 * Save the starting dma buffer offset used and 2422 * length of data that will be transfered in 2423 * the current QTD. 2424 */ 2425 Set_QTD(qtd->qtd_xfer_offs, qtd_dma_offs); 2426 Set_QTD(qtd->qtd_xfer_len, buf_len); 2427 2428 while (buf_len) { 2429 /* 2430 * Advance to the next DMA cookie until finding the cookie 2431 * that qtd_dma_offs falls in. 2432 * It is very likely this loop will never repeat more than 2433 * once. It is here just to accommodate the case qtd_dma_offs 2434 * is increased by multiple cookies during two consecutive 2435 * calls into this function. In that case, the interim DMA 2436 * buffer is allowed to be skipped. 2437 */ 2438 while ((tw->tw_dma_offs + tw->tw_cookie.dmac_size) <= 2439 qtd_dma_offs) { 2440 /* 2441 * tw_dma_offs always points to the starting offset 2442 * of a cookie 2443 */ 2444 tw->tw_dma_offs += tw->tw_cookie.dmac_size; 2445 ddi_dma_nextcookie(tw->tw_dmahandle, &tw->tw_cookie); 2446 tw->tw_cookie_idx++; 2447 ASSERT(tw->tw_cookie_idx < tw->tw_ncookies); 2448 } 2449 2450 /* 2451 * Counting the remained buffer length to be filled in 2452 * the QTD for current DMA cookie 2453 */ 2454 rem_len = (tw->tw_dma_offs + tw->tw_cookie.dmac_size) - 2455 qtd_dma_offs; 2456 2457 /* Update the beginning of the buffer */ 2458 buf_addr = (qtd_dma_offs - tw->tw_dma_offs) + 2459 tw->tw_cookie.dmac_address; 2460 ASSERT((buf_addr % EHCI_4K_ALIGN) == 0); 2461 Set_QTD(qtd->qtd_buf[i], buf_addr); 2462 2463 USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 2464 "ehci_fill_in_qtd: dmac_addr 0x%p dmac_size " 2465 "0x%lx idx %d", buf_addr, tw->tw_cookie.dmac_size, 2466 tw->tw_cookie_idx); 2467 2468 if (buf_len <= EHCI_MAX_QTD_BUF_SIZE) { 2469 ASSERT(buf_len <= rem_len); 2470 break; 2471 } else { 2472 ASSERT(rem_len >= EHCI_MAX_QTD_BUF_SIZE); 2473 buf_len -= EHCI_MAX_QTD_BUF_SIZE; 2474 qtd_dma_offs += EHCI_MAX_QTD_BUF_SIZE; 2475 } 2476 2477 i++; 2478 } 2479 2480 /* 2481 * Setup the alternate next qTD pointer if appropriate. The alternate 2482 * qtd is currently pointing to a QTD that is not yet linked, but will 2483 * be in the very near future. If a short_xfer occurs in this 2484 * situation , the HC will automatically skip this QH. Eventually 2485 * everything will be placed and the alternate_qtd will be valid QTD. 2486 * For more information on alternate qtds look at section 3.5.2 in the 2487 * EHCI spec. 2488 */ 2489 if (tw->tw_alt_qtd != NULL) { 2490 Set_QTD(qtd->qtd_alt_next_qtd, 2491 (ehci_qtd_cpu_to_iommu(ehcip, tw->tw_alt_qtd) & 2492 EHCI_QTD_ALT_NEXT_QTD_PTR)); 2493 } 2494 2495 /* 2496 * For control, bulk and interrupt QTD, now 2497 * enable current QTD by setting active bit. 2498 */ 2499 Set_QTD(qtd->qtd_ctrl, (ctrl | EHCI_QTD_CTRL_ACTIVE_XACT)); 2500 2501 /* 2502 * For Control Xfer, qtd_ctrl_phase is a valid filed. 2503 */ 2504 if (qtd_ctrl_phase) { 2505 Set_QTD(qtd->qtd_ctrl_phase, qtd_ctrl_phase); 2506 } 2507 2508 /* Set the transfer wrapper */ 2509 ASSERT(tw != NULL); 2510 ASSERT(tw->tw_id != NULL); 2511 2512 Set_QTD(qtd->qtd_trans_wrapper, (uint32_t)tw->tw_id); 2513 } 2514 2515 2516 /* 2517 * ehci_insert_qtd_on_tw: 2518 * 2519 * The transfer wrapper keeps a list of all Transfer Descriptors (QTD) that 2520 * are allocated for this transfer. Insert a QTD onto this list. The list 2521 * of QTD's does not include the dummy QTD that is at the end of the list of 2522 * QTD's for the endpoint. 2523 */ 2524 static void 2525 ehci_insert_qtd_on_tw( 2526 ehci_state_t *ehcip, 2527 ehci_trans_wrapper_t *tw, 2528 ehci_qtd_t *qtd) 2529 { 2530 /* 2531 * Set the next pointer to NULL because 2532 * this is the last QTD on list. 2533 */ 2534 Set_QTD(qtd->qtd_tw_next_qtd, NULL); 2535 2536 if (tw->tw_qtd_head == NULL) { 2537 ASSERT(tw->tw_qtd_tail == NULL); 2538 tw->tw_qtd_head = qtd; 2539 tw->tw_qtd_tail = qtd; 2540 } else { 2541 ehci_qtd_t *dummy = (ehci_qtd_t *)tw->tw_qtd_tail; 2542 2543 ASSERT(dummy != NULL); 2544 ASSERT(dummy != qtd); 2545 ASSERT(Get_QTD(qtd->qtd_state) != EHCI_QTD_DUMMY); 2546 2547 /* Add the qtd to the end of the list */ 2548 Set_QTD(dummy->qtd_tw_next_qtd, 2549 ehci_qtd_cpu_to_iommu(ehcip, qtd)); 2550 2551 tw->tw_qtd_tail = qtd; 2552 2553 ASSERT(Get_QTD(qtd->qtd_tw_next_qtd) == NULL); 2554 } 2555 } 2556 2557 2558 /* 2559 * ehci_insert_qtd_into_active_qtd_list: 2560 * 2561 * Insert current QTD into active QTD list. 2562 */ 2563 static void 2564 ehci_insert_qtd_into_active_qtd_list( 2565 ehci_state_t *ehcip, 2566 ehci_qtd_t *qtd) 2567 { 2568 ehci_qtd_t *curr_qtd, *next_qtd; 2569 2570 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 2571 2572 curr_qtd = ehcip->ehci_active_qtd_list; 2573 2574 /* Insert this QTD into QTD Active List */ 2575 if (curr_qtd) { 2576 next_qtd = ehci_qtd_iommu_to_cpu(ehcip, 2577 Get_QTD(curr_qtd->qtd_active_qtd_next)); 2578 2579 while (next_qtd) { 2580 curr_qtd = next_qtd; 2581 next_qtd = ehci_qtd_iommu_to_cpu(ehcip, 2582 Get_QTD(curr_qtd->qtd_active_qtd_next)); 2583 } 2584 2585 Set_QTD(qtd->qtd_active_qtd_prev, 2586 ehci_qtd_cpu_to_iommu(ehcip, curr_qtd)); 2587 2588 Set_QTD(curr_qtd->qtd_active_qtd_next, 2589 ehci_qtd_cpu_to_iommu(ehcip, qtd)); 2590 } else { 2591 ehcip->ehci_active_qtd_list = qtd; 2592 Set_QTD(qtd->qtd_active_qtd_next, NULL); 2593 Set_QTD(qtd->qtd_active_qtd_prev, NULL); 2594 } 2595 } 2596 2597 2598 /* 2599 * ehci_remove_qtd_from_active_qtd_list: 2600 * 2601 * Remove current QTD from the active QTD list. 2602 * 2603 * NOTE: This function is also called from POLLED MODE. 2604 */ 2605 void 2606 ehci_remove_qtd_from_active_qtd_list( 2607 ehci_state_t *ehcip, 2608 ehci_qtd_t *qtd) 2609 { 2610 ehci_qtd_t *curr_qtd, *prev_qtd, *next_qtd; 2611 2612 ASSERT(qtd != NULL); 2613 2614 curr_qtd = ehcip->ehci_active_qtd_list; 2615 2616 while ((curr_qtd) && (curr_qtd != qtd)) { 2617 curr_qtd = ehci_qtd_iommu_to_cpu(ehcip, 2618 Get_QTD(curr_qtd->qtd_active_qtd_next)); 2619 } 2620 2621 if ((curr_qtd) && (curr_qtd == qtd)) { 2622 prev_qtd = ehci_qtd_iommu_to_cpu(ehcip, 2623 Get_QTD(curr_qtd->qtd_active_qtd_prev)); 2624 next_qtd = ehci_qtd_iommu_to_cpu(ehcip, 2625 Get_QTD(curr_qtd->qtd_active_qtd_next)); 2626 2627 if (prev_qtd) { 2628 Set_QTD(prev_qtd->qtd_active_qtd_next, 2629 Get_QTD(curr_qtd->qtd_active_qtd_next)); 2630 } else { 2631 ehcip->ehci_active_qtd_list = next_qtd; 2632 } 2633 2634 if (next_qtd) { 2635 Set_QTD(next_qtd->qtd_active_qtd_prev, 2636 Get_QTD(curr_qtd->qtd_active_qtd_prev)); 2637 } 2638 } else { 2639 USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 2640 "ehci_remove_qtd_from_active_qtd_list: " 2641 "Unable to find QTD in active_qtd_list"); 2642 } 2643 } 2644 2645 2646 /* 2647 * ehci_traverse_qtds: 2648 * 2649 * Traverse the list of QTDs for given pipe using transfer wrapper. Since 2650 * the endpoint is marked as Halted, the Host Controller (HC) is no longer 2651 * accessing these QTDs. Remove all the QTDs that are attached to endpoint. 2652 */ 2653 static void 2654 ehci_traverse_qtds( 2655 ehci_state_t *ehcip, 2656 usba_pipe_handle_data_t *ph) 2657 { 2658 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 2659 ehci_trans_wrapper_t *next_tw; 2660 ehci_qtd_t *qtd; 2661 ehci_qtd_t *next_qtd; 2662 2663 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 2664 2665 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 2666 "ehci_traverse_qtds:"); 2667 2668 /* Process the transfer wrappers for this pipe */ 2669 next_tw = pp->pp_tw_head; 2670 2671 while (next_tw) { 2672 /* Stop the the transfer timer */ 2673 ehci_stop_xfer_timer(ehcip, next_tw, EHCI_REMOVE_XFER_ALWAYS); 2674 2675 qtd = (ehci_qtd_t *)next_tw->tw_qtd_head; 2676 2677 /* Walk through each QTD for this transfer wrapper */ 2678 while (qtd) { 2679 /* Remove this QTD from active QTD list */ 2680 ehci_remove_qtd_from_active_qtd_list(ehcip, qtd); 2681 2682 next_qtd = ehci_qtd_iommu_to_cpu(ehcip, 2683 Get_QTD(qtd->qtd_tw_next_qtd)); 2684 2685 /* Deallocate this QTD */ 2686 ehci_deallocate_qtd(ehcip, qtd); 2687 2688 qtd = next_qtd; 2689 } 2690 2691 next_tw = next_tw->tw_next; 2692 } 2693 2694 /* Clear current qtd pointer */ 2695 Set_QH(pp->pp_qh->qh_curr_qtd, (uint32_t)0x00000000); 2696 2697 /* Update the next qtd pointer in the QH */ 2698 Set_QH(pp->pp_qh->qh_next_qtd, Get_QH(pp->pp_qh->qh_dummy_qtd)); 2699 } 2700 2701 2702 /* 2703 * ehci_deallocate_qtd: 2704 * 2705 * Deallocate a Host Controller's (HC) Transfer Descriptor (QTD). 2706 * 2707 * NOTE: This function is also called from POLLED MODE. 2708 */ 2709 void 2710 ehci_deallocate_qtd( 2711 ehci_state_t *ehcip, 2712 ehci_qtd_t *old_qtd) 2713 { 2714 ehci_trans_wrapper_t *tw = NULL; 2715 2716 USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 2717 "ehci_deallocate_qtd: old_qtd = 0x%p", (void *)old_qtd); 2718 2719 /* 2720 * Obtain the transaction wrapper and tw will be 2721 * NULL for the dummy QTDs. 2722 */ 2723 if (Get_QTD(old_qtd->qtd_state) != EHCI_QTD_DUMMY) { 2724 tw = (ehci_trans_wrapper_t *) 2725 EHCI_LOOKUP_ID((uint32_t) 2726 Get_QTD(old_qtd->qtd_trans_wrapper)); 2727 2728 ASSERT(tw != NULL); 2729 } 2730 2731 /* 2732 * If QTD's transfer wrapper is NULL, don't access its TW. 2733 * Just free the QTD. 2734 */ 2735 if (tw) { 2736 ehci_qtd_t *qtd, *next_qtd; 2737 2738 qtd = tw->tw_qtd_head; 2739 2740 if (old_qtd != qtd) { 2741 next_qtd = ehci_qtd_iommu_to_cpu( 2742 ehcip, Get_QTD(qtd->qtd_tw_next_qtd)); 2743 2744 while (next_qtd != old_qtd) { 2745 qtd = next_qtd; 2746 next_qtd = ehci_qtd_iommu_to_cpu( 2747 ehcip, Get_QTD(qtd->qtd_tw_next_qtd)); 2748 } 2749 2750 Set_QTD(qtd->qtd_tw_next_qtd, old_qtd->qtd_tw_next_qtd); 2751 2752 if (qtd->qtd_tw_next_qtd == NULL) { 2753 tw->tw_qtd_tail = qtd; 2754 } 2755 } else { 2756 tw->tw_qtd_head = ehci_qtd_iommu_to_cpu( 2757 ehcip, Get_QTD(old_qtd->qtd_tw_next_qtd)); 2758 2759 if (tw->tw_qtd_head == NULL) { 2760 tw->tw_qtd_tail = NULL; 2761 } 2762 } 2763 } 2764 2765 bzero((void *)old_qtd, sizeof (ehci_qtd_t)); 2766 Set_QTD(old_qtd->qtd_state, EHCI_QTD_FREE); 2767 2768 USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 2769 "Dealloc_qtd: qtd 0x%p", (void *)old_qtd); 2770 } 2771 2772 2773 /* 2774 * ehci_qtd_cpu_to_iommu: 2775 * 2776 * This function converts for the given Transfer Descriptor (QTD) CPU address 2777 * to IO address. 2778 * 2779 * NOTE: This function is also called from POLLED MODE. 2780 */ 2781 uint32_t 2782 ehci_qtd_cpu_to_iommu( 2783 ehci_state_t *ehcip, 2784 ehci_qtd_t *addr) 2785 { 2786 uint32_t td; 2787 2788 td = (uint32_t)ehcip->ehci_qtd_pool_cookie.dmac_address + 2789 (uint32_t)((uintptr_t)addr - 2790 (uintptr_t)(ehcip->ehci_qtd_pool_addr)); 2791 2792 ASSERT((ehcip->ehci_qtd_pool_cookie.dmac_address + 2793 (uint32_t) (sizeof (ehci_qtd_t) * 2794 (addr - ehcip->ehci_qtd_pool_addr))) == 2795 (ehcip->ehci_qtd_pool_cookie.dmac_address + 2796 (uint32_t)((uintptr_t)addr - (uintptr_t) 2797 (ehcip->ehci_qtd_pool_addr)))); 2798 2799 ASSERT(td >= ehcip->ehci_qtd_pool_cookie.dmac_address); 2800 ASSERT(td <= ehcip->ehci_qtd_pool_cookie.dmac_address + 2801 sizeof (ehci_qtd_t) * ehci_qtd_pool_size); 2802 2803 return (td); 2804 } 2805 2806 2807 /* 2808 * ehci_qtd_iommu_to_cpu: 2809 * 2810 * This function converts for the given Transfer Descriptor (QTD) IO address 2811 * to CPU address. 2812 * 2813 * NOTE: This function is also called from POLLED MODE. 2814 */ 2815 ehci_qtd_t * 2816 ehci_qtd_iommu_to_cpu( 2817 ehci_state_t *ehcip, 2818 uintptr_t addr) 2819 { 2820 ehci_qtd_t *qtd; 2821 2822 if (addr == NULL) { 2823 2824 return (NULL); 2825 } 2826 2827 qtd = (ehci_qtd_t *)((uintptr_t) 2828 (addr - ehcip->ehci_qtd_pool_cookie.dmac_address) + 2829 (uintptr_t)ehcip->ehci_qtd_pool_addr); 2830 2831 ASSERT(qtd >= ehcip->ehci_qtd_pool_addr); 2832 ASSERT((uintptr_t)qtd <= (uintptr_t)ehcip->ehci_qtd_pool_addr + 2833 (uintptr_t)(sizeof (ehci_qtd_t) * ehci_qtd_pool_size)); 2834 2835 return (qtd); 2836 } 2837 2838 /* 2839 * ehci_allocate_tds_for_tw_resources: 2840 * 2841 * Allocate n Transfer Descriptors (TD) from the TD buffer pool and places it 2842 * into the TW. Also chooses the correct alternate qtd when required. It is 2843 * used for hardware short transfer support. For more information on 2844 * alternate qtds look at section 3.5.2 in the EHCI spec. 2845 * Here is how each alternate qtd's are used: 2846 * 2847 * Bulk: used fully. 2848 * Intr: xfers only require 1 QTD, so alternate qtds are never used. 2849 * Ctrl: Should not use alternate QTD 2850 * Isoch: Doesn't support short_xfer nor does it use QTD 2851 * 2852 * Returns USB_NO_RESOURCES if it was not able to allocate all the requested TD 2853 * otherwise USB_SUCCESS. 2854 */ 2855 int 2856 ehci_allocate_tds_for_tw( 2857 ehci_state_t *ehcip, 2858 ehci_pipe_private_t *pp, 2859 ehci_trans_wrapper_t *tw, 2860 size_t qtd_count) 2861 { 2862 usb_ep_descr_t *eptd = &pp->pp_pipe_handle->p_ep; 2863 uchar_t attributes; 2864 ehci_qtd_t *qtd; 2865 uint32_t qtd_addr; 2866 int i; 2867 int error = USB_SUCCESS; 2868 2869 attributes = eptd->bmAttributes & USB_EP_ATTR_MASK; 2870 2871 for (i = 0; i < qtd_count; i += 1) { 2872 qtd = ehci_allocate_qtd_from_pool(ehcip); 2873 if (qtd == NULL) { 2874 error = USB_NO_RESOURCES; 2875 USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 2876 "ehci_allocate_qtds_for_tw: " 2877 "Unable to allocate %lu QTDs", 2878 qtd_count); 2879 break; 2880 } 2881 if (i > 0) { 2882 qtd_addr = ehci_qtd_cpu_to_iommu(ehcip, 2883 tw->tw_qtd_free_list); 2884 Set_QTD(qtd->qtd_tw_next_qtd, qtd_addr); 2885 } 2886 tw->tw_qtd_free_list = qtd; 2887 2888 /* 2889 * Save the second one as a pointer to the new dummy 1. 2890 * It is used later for the alt_qtd_ptr. Xfers with only 2891 * one qtd do not need alt_qtd_ptr. 2892 * The tds's are allocated and put into a stack, that is 2893 * why the second qtd allocated will turn out to be the 2894 * new dummy 1. 2895 */ 2896 if ((i == 1) && (attributes == USB_EP_ATTR_BULK)) { 2897 tw->tw_alt_qtd = qtd; 2898 } 2899 } 2900 2901 return (error); 2902 } 2903 2904 /* 2905 * ehci_allocate_tw_resources: 2906 * 2907 * Allocate a Transaction Wrapper (TW) and n Transfer Descriptors (QTD) 2908 * from the QTD buffer pool and places it into the TW. It does an all 2909 * or nothing transaction. 2910 * 2911 * Returns NULL if there is insufficient resources otherwise TW. 2912 */ 2913 static ehci_trans_wrapper_t * 2914 ehci_allocate_tw_resources( 2915 ehci_state_t *ehcip, 2916 ehci_pipe_private_t *pp, 2917 size_t tw_length, 2918 usb_flags_t usb_flags, 2919 size_t qtd_count) 2920 { 2921 ehci_trans_wrapper_t *tw; 2922 2923 tw = ehci_create_transfer_wrapper(ehcip, pp, tw_length, usb_flags); 2924 2925 if (tw == NULL) { 2926 USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 2927 "ehci_allocate_tw_resources: Unable to allocate TW"); 2928 } else { 2929 if (ehci_allocate_tds_for_tw(ehcip, pp, tw, qtd_count) == 2930 USB_SUCCESS) { 2931 tw->tw_num_qtds = qtd_count; 2932 } else { 2933 ehci_deallocate_tw(ehcip, pp, tw); 2934 tw = NULL; 2935 } 2936 } 2937 2938 return (tw); 2939 } 2940 2941 2942 /* 2943 * ehci_free_tw_td_resources: 2944 * 2945 * Free all allocated resources for Transaction Wrapper (TW). 2946 * Does not free the TW itself. 2947 * 2948 * Returns NULL if there is insufficient resources otherwise TW. 2949 */ 2950 static void 2951 ehci_free_tw_td_resources( 2952 ehci_state_t *ehcip, 2953 ehci_trans_wrapper_t *tw) 2954 { 2955 ehci_qtd_t *qtd = NULL; 2956 ehci_qtd_t *temp_qtd = NULL; 2957 2958 USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 2959 "ehci_free_tw_td_resources: tw = 0x%p", tw); 2960 2961 qtd = tw->tw_qtd_free_list; 2962 while (qtd != NULL) { 2963 /* Save the pointer to the next qtd before destroying it */ 2964 temp_qtd = ehci_qtd_iommu_to_cpu(ehcip, 2965 Get_QTD(qtd->qtd_tw_next_qtd)); 2966 ehci_deallocate_qtd(ehcip, qtd); 2967 qtd = temp_qtd; 2968 } 2969 tw->tw_qtd_free_list = NULL; 2970 } 2971 2972 /* 2973 * Transfer Wrapper functions 2974 * 2975 * ehci_create_transfer_wrapper: 2976 * 2977 * Create a Transaction Wrapper (TW) and this involves the allocating of DMA 2978 * resources. 2979 */ 2980 static ehci_trans_wrapper_t * 2981 ehci_create_transfer_wrapper( 2982 ehci_state_t *ehcip, 2983 ehci_pipe_private_t *pp, 2984 size_t length, 2985 uint_t usb_flags) 2986 { 2987 ddi_device_acc_attr_t dev_attr; 2988 ddi_dma_attr_t dma_attr; 2989 int result; 2990 size_t real_length; 2991 ehci_trans_wrapper_t *tw; 2992 int kmem_flag; 2993 int (*dmamem_wait)(caddr_t); 2994 2995 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 2996 "ehci_create_transfer_wrapper: length = 0x%lx flags = 0x%x", 2997 length, usb_flags); 2998 2999 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 3000 3001 /* SLEEP flag should not be used in interrupt context */ 3002 if (servicing_interrupt()) { 3003 kmem_flag = KM_NOSLEEP; 3004 dmamem_wait = DDI_DMA_DONTWAIT; 3005 } else { 3006 kmem_flag = KM_SLEEP; 3007 dmamem_wait = DDI_DMA_SLEEP; 3008 } 3009 3010 /* Allocate space for the transfer wrapper */ 3011 tw = kmem_zalloc(sizeof (ehci_trans_wrapper_t), kmem_flag); 3012 3013 if (tw == NULL) { 3014 USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 3015 "ehci_create_transfer_wrapper: kmem_zalloc failed"); 3016 3017 return (NULL); 3018 } 3019 3020 /* zero-length packet doesn't need to allocate dma memory */ 3021 if (length == 0) { 3022 3023 goto dmadone; 3024 } 3025 3026 /* allow sg lists for transfer wrapper dma memory */ 3027 bcopy(&ehcip->ehci_dma_attr, &dma_attr, sizeof (ddi_dma_attr_t)); 3028 dma_attr.dma_attr_sgllen = EHCI_DMA_ATTR_TW_SGLLEN; 3029 dma_attr.dma_attr_align = EHCI_DMA_ATTR_ALIGNMENT; 3030 3031 /* Allocate the DMA handle */ 3032 result = ddi_dma_alloc_handle(ehcip->ehci_dip, 3033 &dma_attr, dmamem_wait, 0, &tw->tw_dmahandle); 3034 3035 if (result != DDI_SUCCESS) { 3036 USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 3037 "ehci_create_transfer_wrapper: Alloc handle failed"); 3038 3039 kmem_free(tw, sizeof (ehci_trans_wrapper_t)); 3040 3041 return (NULL); 3042 } 3043 3044 dev_attr.devacc_attr_version = DDI_DEVICE_ATTR_V0; 3045 3046 /* no need for swapping the raw data */ 3047 dev_attr.devacc_attr_endian_flags = DDI_NEVERSWAP_ACC; 3048 dev_attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC; 3049 3050 /* Allocate the memory */ 3051 result = ddi_dma_mem_alloc(tw->tw_dmahandle, length, 3052 &dev_attr, DDI_DMA_CONSISTENT, dmamem_wait, NULL, 3053 (caddr_t *)&tw->tw_buf, &real_length, &tw->tw_accesshandle); 3054 3055 if (result != DDI_SUCCESS) { 3056 USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 3057 "ehci_create_transfer_wrapper: dma_mem_alloc fail"); 3058 3059 ddi_dma_free_handle(&tw->tw_dmahandle); 3060 kmem_free(tw, sizeof (ehci_trans_wrapper_t)); 3061 3062 return (NULL); 3063 } 3064 3065 ASSERT(real_length >= length); 3066 3067 /* Bind the handle */ 3068 result = ddi_dma_addr_bind_handle(tw->tw_dmahandle, NULL, 3069 (caddr_t)tw->tw_buf, real_length, DDI_DMA_RDWR|DDI_DMA_CONSISTENT, 3070 dmamem_wait, NULL, &tw->tw_cookie, &tw->tw_ncookies); 3071 3072 if (result != DDI_DMA_MAPPED) { 3073 ehci_decode_ddi_dma_addr_bind_handle_result(ehcip, result); 3074 3075 ddi_dma_mem_free(&tw->tw_accesshandle); 3076 ddi_dma_free_handle(&tw->tw_dmahandle); 3077 kmem_free(tw, sizeof (ehci_trans_wrapper_t)); 3078 3079 return (NULL); 3080 } 3081 3082 tw->tw_cookie_idx = 0; 3083 tw->tw_dma_offs = 0; 3084 3085 dmadone: 3086 /* 3087 * Only allow one wrapper to be added at a time. Insert the 3088 * new transaction wrapper into the list for this pipe. 3089 */ 3090 if (pp->pp_tw_head == NULL) { 3091 pp->pp_tw_head = tw; 3092 pp->pp_tw_tail = tw; 3093 } else { 3094 pp->pp_tw_tail->tw_next = tw; 3095 pp->pp_tw_tail = tw; 3096 } 3097 3098 /* Store the transfer length */ 3099 tw->tw_length = length; 3100 3101 /* Store a back pointer to the pipe private structure */ 3102 tw->tw_pipe_private = pp; 3103 3104 /* Store the transfer type - synchronous or asynchronous */ 3105 tw->tw_flags = usb_flags; 3106 3107 /* Get and Store 32bit ID */ 3108 tw->tw_id = EHCI_GET_ID((void *)tw); 3109 3110 ASSERT(tw->tw_id != NULL); 3111 3112 USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 3113 "ehci_create_transfer_wrapper: tw = 0x%p, ncookies = %u", 3114 tw, tw->tw_ncookies); 3115 3116 return (tw); 3117 } 3118 3119 3120 /* 3121 * ehci_start_xfer_timer: 3122 * 3123 * Start the timer for the control, bulk and for one time interrupt 3124 * transfers. 3125 */ 3126 /* ARGSUSED */ 3127 static void 3128 ehci_start_xfer_timer( 3129 ehci_state_t *ehcip, 3130 ehci_pipe_private_t *pp, 3131 ehci_trans_wrapper_t *tw) 3132 { 3133 USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 3134 "ehci_start_xfer_timer: tw = 0x%p", tw); 3135 3136 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 3137 3138 /* 3139 * The timeout handling is done only for control, bulk and for 3140 * one time Interrupt transfers. 3141 * 3142 * NOTE: If timeout is zero; Assume infinite timeout and don't 3143 * insert this transfer on the timeout list. 3144 */ 3145 if (tw->tw_timeout) { 3146 /* 3147 * Add this transfer wrapper to the head of the pipe's 3148 * tw timeout list. 3149 */ 3150 if (pp->pp_timeout_list) { 3151 tw->tw_timeout_next = pp->pp_timeout_list; 3152 } 3153 3154 pp->pp_timeout_list = tw; 3155 ehci_start_timer(ehcip, pp); 3156 } 3157 } 3158 3159 3160 /* 3161 * ehci_stop_xfer_timer: 3162 * 3163 * Start the timer for the control, bulk and for one time interrupt 3164 * transfers. 3165 */ 3166 void 3167 ehci_stop_xfer_timer( 3168 ehci_state_t *ehcip, 3169 ehci_trans_wrapper_t *tw, 3170 uint_t flag) 3171 { 3172 ehci_pipe_private_t *pp; 3173 timeout_id_t timer_id; 3174 3175 USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 3176 "ehci_stop_xfer_timer: tw = 0x%p", tw); 3177 3178 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 3179 3180 /* Obtain the pipe private structure */ 3181 pp = tw->tw_pipe_private; 3182 3183 /* check if the timeout tw list is empty */ 3184 if (pp->pp_timeout_list == NULL) { 3185 3186 return; 3187 } 3188 3189 switch (flag) { 3190 case EHCI_REMOVE_XFER_IFLAST: 3191 if (tw->tw_qtd_head != tw->tw_qtd_tail) { 3192 break; 3193 } 3194 3195 /* FALLTHRU */ 3196 case EHCI_REMOVE_XFER_ALWAYS: 3197 ehci_remove_tw_from_timeout_list(ehcip, tw); 3198 3199 if ((pp->pp_timeout_list == NULL) && 3200 (pp->pp_timer_id)) { 3201 3202 timer_id = pp->pp_timer_id; 3203 3204 /* Reset the timer id to zero */ 3205 pp->pp_timer_id = 0; 3206 3207 mutex_exit(&ehcip->ehci_int_mutex); 3208 3209 (void) untimeout(timer_id); 3210 3211 mutex_enter(&ehcip->ehci_int_mutex); 3212 } 3213 break; 3214 default: 3215 break; 3216 } 3217 } 3218 3219 3220 /* 3221 * ehci_xfer_timeout_handler: 3222 * 3223 * Control or bulk transfer timeout handler. 3224 */ 3225 static void 3226 ehci_xfer_timeout_handler(void *arg) 3227 { 3228 usba_pipe_handle_data_t *ph = (usba_pipe_handle_data_t *)arg; 3229 ehci_state_t *ehcip = ehci_obtain_state( 3230 ph->p_usba_device->usb_root_hub_dip); 3231 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 3232 ehci_trans_wrapper_t *tw, *next; 3233 ehci_trans_wrapper_t *expire_xfer_list = NULL; 3234 ehci_qtd_t *qtd; 3235 3236 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 3237 "ehci_xfer_timeout_handler: ehcip = 0x%p, ph = 0x%p", ehcip, ph); 3238 3239 mutex_enter(&ehcip->ehci_int_mutex); 3240 3241 /* 3242 * Check whether still timeout handler is valid. 3243 */ 3244 if (pp->pp_timer_id != 0) { 3245 3246 /* Reset the timer id to zero */ 3247 pp->pp_timer_id = 0; 3248 } else { 3249 mutex_exit(&ehcip->ehci_int_mutex); 3250 3251 return; 3252 } 3253 3254 /* Get the transfer timeout list head */ 3255 tw = pp->pp_timeout_list; 3256 3257 while (tw) { 3258 3259 /* Get the transfer on the timeout list */ 3260 next = tw->tw_timeout_next; 3261 3262 tw->tw_timeout--; 3263 3264 if (tw->tw_timeout <= 0) { 3265 3266 /* remove the tw from the timeout list */ 3267 ehci_remove_tw_from_timeout_list(ehcip, tw); 3268 3269 /* remove QTDs from active QTD list */ 3270 qtd = tw->tw_qtd_head; 3271 while (qtd) { 3272 ehci_remove_qtd_from_active_qtd_list( 3273 ehcip, qtd); 3274 3275 /* Get the next QTD from the wrapper */ 3276 qtd = ehci_qtd_iommu_to_cpu(ehcip, 3277 Get_QTD(qtd->qtd_tw_next_qtd)); 3278 } 3279 3280 /* 3281 * Preserve the order to the requests 3282 * started time sequence. 3283 */ 3284 tw->tw_timeout_next = expire_xfer_list; 3285 expire_xfer_list = tw; 3286 } 3287 3288 tw = next; 3289 } 3290 3291 /* 3292 * The timer should be started before the callbacks. 3293 * There is always a chance that ehci interrupts come 3294 * in when we release the mutex while calling the tw back. 3295 * To keep an accurate timeout it should be restarted 3296 * as soon as possible. 3297 */ 3298 ehci_start_timer(ehcip, pp); 3299 3300 /* Get the expired transfer timeout list head */ 3301 tw = expire_xfer_list; 3302 3303 while (tw) { 3304 3305 /* Get the next tw on the expired transfer timeout list */ 3306 next = tw->tw_timeout_next; 3307 3308 /* 3309 * The error handle routine will release the mutex when 3310 * calling back to USBA. But this will not cause any race. 3311 * We do the callback and are relying on ehci_pipe_cleanup() 3312 * to halt the queue head and clean up since we should not 3313 * block in timeout context. 3314 */ 3315 ehci_handle_error(ehcip, tw->tw_qtd_head, USB_CR_TIMEOUT); 3316 3317 tw = next; 3318 } 3319 mutex_exit(&ehcip->ehci_int_mutex); 3320 } 3321 3322 3323 /* 3324 * ehci_remove_tw_from_timeout_list: 3325 * 3326 * Remove Control or bulk transfer from the timeout list. 3327 */ 3328 static void 3329 ehci_remove_tw_from_timeout_list( 3330 ehci_state_t *ehcip, 3331 ehci_trans_wrapper_t *tw) 3332 { 3333 ehci_pipe_private_t *pp; 3334 ehci_trans_wrapper_t *prev, *next; 3335 3336 USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 3337 "ehci_remove_tw_from_timeout_list: tw = 0x%p", tw); 3338 3339 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 3340 3341 /* Obtain the pipe private structure */ 3342 pp = tw->tw_pipe_private; 3343 3344 if (pp->pp_timeout_list) { 3345 if (pp->pp_timeout_list == tw) { 3346 pp->pp_timeout_list = tw->tw_timeout_next; 3347 3348 tw->tw_timeout_next = NULL; 3349 } else { 3350 prev = pp->pp_timeout_list; 3351 next = prev->tw_timeout_next; 3352 3353 while (next && (next != tw)) { 3354 prev = next; 3355 next = next->tw_timeout_next; 3356 } 3357 3358 if (next == tw) { 3359 prev->tw_timeout_next = 3360 next->tw_timeout_next; 3361 tw->tw_timeout_next = NULL; 3362 } 3363 } 3364 } 3365 } 3366 3367 3368 /* 3369 * ehci_start_timer: 3370 * 3371 * Start the pipe's timer 3372 */ 3373 static void 3374 ehci_start_timer( 3375 ehci_state_t *ehcip, 3376 ehci_pipe_private_t *pp) 3377 { 3378 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 3379 "ehci_start_timer: ehcip = 0x%p, pp = 0x%p", ehcip, pp); 3380 3381 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 3382 3383 /* 3384 * Start the pipe's timer only if currently timer is not 3385 * running and if there are any transfers on the timeout 3386 * list. This timer will be per pipe. 3387 */ 3388 if ((!pp->pp_timer_id) && (pp->pp_timeout_list)) { 3389 pp->pp_timer_id = timeout(ehci_xfer_timeout_handler, 3390 (void *)(pp->pp_pipe_handle), drv_usectohz(1000000)); 3391 } 3392 } 3393 3394 /* 3395 * ehci_deallocate_tw: 3396 * 3397 * Deallocate of a Transaction Wrapper (TW) and this involves the freeing of 3398 * of DMA resources. 3399 */ 3400 void 3401 ehci_deallocate_tw( 3402 ehci_state_t *ehcip, 3403 ehci_pipe_private_t *pp, 3404 ehci_trans_wrapper_t *tw) 3405 { 3406 ehci_trans_wrapper_t *prev, *next; 3407 3408 USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 3409 "ehci_deallocate_tw: tw = 0x%p", tw); 3410 3411 /* 3412 * If the transfer wrapper has no Host Controller (HC) 3413 * Transfer Descriptors (QTD) associated with it, then 3414 * remove the transfer wrapper. 3415 */ 3416 if (tw->tw_qtd_head) { 3417 ASSERT(tw->tw_qtd_tail != NULL); 3418 3419 return; 3420 } 3421 3422 ASSERT(tw->tw_qtd_tail == NULL); 3423 3424 /* Make sure we return all the unused qtd's to the pool as well */ 3425 ehci_free_tw_td_resources(ehcip, tw); 3426 3427 /* 3428 * If pp->pp_tw_head and pp->pp_tw_tail are pointing to 3429 * given TW then set the head and tail equal to NULL. 3430 * Otherwise search for this TW in the linked TW's list 3431 * and then remove this TW from the list. 3432 */ 3433 if (pp->pp_tw_head == tw) { 3434 if (pp->pp_tw_tail == tw) { 3435 pp->pp_tw_head = NULL; 3436 pp->pp_tw_tail = NULL; 3437 } else { 3438 pp->pp_tw_head = tw->tw_next; 3439 } 3440 } else { 3441 prev = pp->pp_tw_head; 3442 next = prev->tw_next; 3443 3444 while (next && (next != tw)) { 3445 prev = next; 3446 next = next->tw_next; 3447 } 3448 3449 if (next == tw) { 3450 prev->tw_next = next->tw_next; 3451 3452 if (pp->pp_tw_tail == tw) { 3453 pp->pp_tw_tail = prev; 3454 } 3455 } 3456 } 3457 3458 /* 3459 * Make sure that, this TW has been removed 3460 * from the timeout list. 3461 */ 3462 ehci_remove_tw_from_timeout_list(ehcip, tw); 3463 3464 /* Deallocate this TW */ 3465 ehci_free_tw(ehcip, pp, tw); 3466 } 3467 3468 3469 /* 3470 * ehci_free_dma_resources: 3471 * 3472 * Free dma resources of a Transfer Wrapper (TW) and also free the TW. 3473 * 3474 * NOTE: This function is also called from POLLED MODE. 3475 */ 3476 void 3477 ehci_free_dma_resources( 3478 ehci_state_t *ehcip, 3479 usba_pipe_handle_data_t *ph) 3480 { 3481 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 3482 ehci_trans_wrapper_t *head_tw = pp->pp_tw_head; 3483 ehci_trans_wrapper_t *next_tw, *tw; 3484 3485 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 3486 "ehci_free_dma_resources: ph = 0x%p", (void *)ph); 3487 3488 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 3489 3490 /* Process the Transfer Wrappers */ 3491 next_tw = head_tw; 3492 while (next_tw) { 3493 tw = next_tw; 3494 next_tw = tw->tw_next; 3495 3496 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 3497 "ehci_free_dma_resources: Free TW = 0x%p", (void *)tw); 3498 3499 ehci_free_tw(ehcip, pp, tw); 3500 } 3501 3502 /* Adjust the head and tail pointers */ 3503 pp->pp_tw_head = NULL; 3504 pp->pp_tw_tail = NULL; 3505 } 3506 3507 3508 /* 3509 * ehci_free_tw: 3510 * 3511 * Free the Transfer Wrapper (TW). 3512 */ 3513 /*ARGSUSED*/ 3514 static void 3515 ehci_free_tw( 3516 ehci_state_t *ehcip, 3517 ehci_pipe_private_t *pp, 3518 ehci_trans_wrapper_t *tw) 3519 { 3520 int rval; 3521 3522 USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl, 3523 "ehci_free_tw: tw = 0x%p", tw); 3524 3525 ASSERT(tw != NULL); 3526 ASSERT(tw->tw_id != NULL); 3527 3528 /* Free 32bit ID */ 3529 EHCI_FREE_ID((uint32_t)tw->tw_id); 3530 3531 if (tw->tw_dmahandle != NULL) { 3532 rval = ddi_dma_unbind_handle(tw->tw_dmahandle); 3533 ASSERT(rval == DDI_SUCCESS); 3534 3535 ddi_dma_mem_free(&tw->tw_accesshandle); 3536 ddi_dma_free_handle(&tw->tw_dmahandle); 3537 } 3538 3539 /* Free transfer wrapper */ 3540 kmem_free(tw, sizeof (ehci_trans_wrapper_t)); 3541 } 3542 3543 3544 /* 3545 * Miscellaneous functions 3546 */ 3547 3548 /* 3549 * ehci_allocate_intr_in_resource 3550 * 3551 * Allocate interrupt request structure for the interrupt IN transfer. 3552 */ 3553 /*ARGSUSED*/ 3554 int 3555 ehci_allocate_intr_in_resource( 3556 ehci_state_t *ehcip, 3557 ehci_pipe_private_t *pp, 3558 ehci_trans_wrapper_t *tw, 3559 usb_flags_t flags) 3560 { 3561 usba_pipe_handle_data_t *ph = pp->pp_pipe_handle; 3562 usb_intr_req_t *curr_intr_reqp; 3563 usb_opaque_t client_periodic_in_reqp; 3564 size_t length = 0; 3565 3566 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 3567 "ehci_allocate_intr_in_resource:" 3568 "pp = 0x%p tw = 0x%p flags = 0x%x", pp, tw, flags); 3569 3570 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 3571 ASSERT(tw->tw_curr_xfer_reqp == NULL); 3572 3573 /* Get the client periodic in request pointer */ 3574 client_periodic_in_reqp = pp->pp_client_periodic_in_reqp; 3575 3576 /* 3577 * If it a periodic IN request and periodic request is NULL, 3578 * allocate corresponding usb periodic IN request for the 3579 * current periodic polling request and copy the information 3580 * from the saved periodic request structure. 3581 */ 3582 if (client_periodic_in_reqp) { 3583 3584 /* Get the interrupt transfer length */ 3585 length = ((usb_intr_req_t *) 3586 client_periodic_in_reqp)->intr_len; 3587 3588 curr_intr_reqp = usba_hcdi_dup_intr_req(ph->p_dip, 3589 (usb_intr_req_t *)client_periodic_in_reqp, length, flags); 3590 } else { 3591 curr_intr_reqp = usb_alloc_intr_req(ph->p_dip, length, flags); 3592 } 3593 3594 if (curr_intr_reqp == NULL) { 3595 3596 USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 3597 "ehci_allocate_intr_in_resource: Interrupt" 3598 "request structure allocation failed"); 3599 3600 return (USB_NO_RESOURCES); 3601 } 3602 3603 /* For polled mode */ 3604 if (client_periodic_in_reqp == NULL) { 3605 curr_intr_reqp->intr_attributes = USB_ATTRS_SHORT_XFER_OK; 3606 curr_intr_reqp->intr_len = ph->p_ep.wMaxPacketSize; 3607 } else { 3608 /* Check and save the timeout value */ 3609 tw->tw_timeout = (curr_intr_reqp->intr_attributes & 3610 USB_ATTRS_ONE_XFER) ? curr_intr_reqp->intr_timeout: 0; 3611 } 3612 3613 tw->tw_curr_xfer_reqp = (usb_opaque_t)curr_intr_reqp; 3614 tw->tw_length = curr_intr_reqp->intr_len; 3615 3616 mutex_enter(&ph->p_mutex); 3617 ph->p_req_count++; 3618 mutex_exit(&ph->p_mutex); 3619 3620 pp->pp_state = EHCI_PIPE_STATE_ACTIVE; 3621 3622 return (USB_SUCCESS); 3623 } 3624 3625 /* 3626 * ehci_pipe_cleanup 3627 * 3628 * Cleanup ehci pipe. 3629 */ 3630 void 3631 ehci_pipe_cleanup( 3632 ehci_state_t *ehcip, 3633 usba_pipe_handle_data_t *ph) 3634 { 3635 ehci_pipe_private_t *pp = (ehci_pipe_private_t *)ph->p_hcd_private; 3636 uint_t pipe_state = pp->pp_state; 3637 usb_cr_t completion_reason; 3638 usb_ep_descr_t *eptd = &ph->p_ep; 3639 3640 USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl, 3641 "ehci_pipe_cleanup: ph = 0x%p", ph); 3642 3643 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 3644 3645 if (EHCI_ISOC_ENDPOINT(eptd)) { 3646 ehci_isoc_pipe_cleanup(ehcip, ph); 3647 3648 return; 3649 } 3650 3651 ASSERT(!servicing_interrupt()); 3652 3653 /* 3654 * Set the QH's status to Halt condition. 3655 * If another thread is halting this function will automatically 3656 * wait. If a pipe close happens at this time 3657 * we will be in lots of trouble. 3658 * If we are in an interrupt thread, don't halt, because it may 3659 * do a wait_for_sof. 3660 */ 3661 ehci_modify_qh_status_bit(ehcip, pp, SET_HALT); 3662 3663 /* 3664 * Wait for processing all completed transfers and 3665 * to send results to upstream. 3666 */ 3667 ehci_wait_for_transfers_completion(ehcip, pp); 3668 3669 /* Save the data toggle information */ 3670 ehci_save_data_toggle(ehcip, ph); 3671 3672 /* 3673 * Traverse the list of QTDs for this pipe using transfer 3674 * wrapper. Process these QTDs depending on their status. 3675 * And stop the timer of this pipe. 3676 */ 3677 ehci_traverse_qtds(ehcip, ph); 3678 3679 /* Make sure the timer is not running */ 3680 ASSERT(pp->pp_timer_id == 0); 3681 3682 /* Do callbacks for all unfinished requests */ 3683 ehci_handle_outstanding_requests(ehcip, pp); 3684 3685 /* Free DMA resources */ 3686 ehci_free_dma_resources(ehcip, ph); 3687 3688 switch (pipe_state) { 3689 case EHCI_PIPE_STATE_CLOSE: 3690 completion_reason = USB_CR_PIPE_CLOSING; 3691 break; 3692 case EHCI_PIPE_STATE_RESET: 3693 case EHCI_PIPE_STATE_STOP_POLLING: 3694 /* Set completion reason */ 3695 completion_reason = (pipe_state == 3696 EHCI_PIPE_STATE_RESET) ? 3697 USB_CR_PIPE_RESET: USB_CR_STOPPED_POLLING; 3698 3699 /* Restore the data toggle information */ 3700 ehci_restore_data_toggle(ehcip, ph); 3701 3702 /* 3703 * Clear the halt bit to restart all the 3704 * transactions on this pipe. 3705 */ 3706 ehci_modify_qh_status_bit(ehcip, pp, CLEAR_HALT); 3707 3708 /* Set pipe state to idle */ 3709 pp->pp_state = EHCI_PIPE_STATE_IDLE; 3710 3711 break; 3712 } 3713 3714 /* 3715 * Do the callback for the original client 3716 * periodic IN request. 3717 */ 3718 if ((EHCI_PERIODIC_ENDPOINT(eptd)) && 3719 ((ph->p_ep.bEndpointAddress & USB_EP_DIR_MASK) == 3720 USB_EP_DIR_IN)) { 3721 3722 ehci_do_client_periodic_in_req_callback( 3723 ehcip, pp, completion_reason); 3724 } 3725 } 3726 3727 3728 /* 3729 * ehci_wait_for_transfers_completion: 3730 * 3731 * Wait for processing all completed transfers and to send results 3732 * to upstream. 3733 */ 3734 static void 3735 ehci_wait_for_transfers_completion( 3736 ehci_state_t *ehcip, 3737 ehci_pipe_private_t *pp) 3738 { 3739 ehci_trans_wrapper_t *next_tw = pp->pp_tw_head; 3740 clock_t xfer_cmpl_time_wait; 3741 ehci_qtd_t *qtd; 3742 3743 USB_DPRINTF_L4(PRINT_MASK_LISTS, 3744 ehcip->ehci_log_hdl, 3745 "ehci_wait_for_transfers_completion: pp = 0x%p", pp); 3746 3747 ASSERT(mutex_owned(&ehcip->ehci_int_mutex)); 3748 3749 if ((ehci_state_is_operational(ehcip)) != USB_SUCCESS) { 3750 3751 return; 3752 } 3753 3754 pp->pp_count_done_qtds = 0; 3755 3756 /* Process the transfer wrappers for this pipe */ 3757 while (next_tw) { 3758 qtd = (ehci_qtd_t *)next_tw->tw_qtd_head; 3759 3760 /* 3761 * Walk through each QTD for this transfer wrapper. 3762 * If a QTD still exists, then it is either on done 3763 * list or on the QH's list. 3764 */ 3765 while (qtd) { 3766 if (!(Get_QTD(qtd->qtd_ctrl) & 3767 EHCI_QTD_CTRL_ACTIVE_XACT)) { 3768 pp->pp_count_done_qtds++; 3769 } 3770 3771 qtd = ehci_qtd_iommu_to_cpu(ehcip, 3772 Get_QTD(qtd->qtd_tw_next_qtd)); 3773 } 3774 3775 next_tw = next_tw->