1######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE 2# 3# This version of terminfo.src is distributed with ncurses and is maintained 4# by Thomas E. Dickey (TD). 5# 6# Report bugs and new terminal descriptions to 7# bug-ncurses@gnu.org 8# 9# $Revision: 1.399 $ 10# $Date: 2011/08/20 20:52:51 $ 11# 12# The original header is preserved below for reference. It is noted that there 13# is a "newer" version which differs in some cosmetic details (but actually 14# stopped updates several years ago); we have decided to not change the header 15# unless there is also a change in content. 16# 17# To further muddy the waters, it is noted that changes to this file as part of 18# maintenance of ncurses (since 1996) are generally conceded to be copyright 19# under the ncurses MIT-style license. That was the effect of the agreement 20# which the principal authors of ncurses made in 1998. However, since much of 21# the file itself is of unknown authorship (and the disclaimer below makes it 22# obvious that Raymond cannot or will not convey rights over those parts), 23# there is no explicit copyright notice on the file itself. 24# 25# It would also be a nuisance to split the file into unknown/known authorship 26# and move pieces as they are maintained, since many of the maintenance changes 27# have been small corrections to Raymond's translations to/from termcap format, 28# correcting the data but not the accompanying annotations. 29# 30# In any case, note that almost half of this file is not data but annotations 31# which reflect creative effort. Furthermore, the structure of entries to 32# reuse common chunks also is creative (and subject to copyright). Finally, 33# some portions of the data are derivative work under a compatible MIT-style 34# license from xterm. 35# 36#------------------------------------------------------------------------------ 37# Version 10.2.1 38# terminfo syntax 39# 40# Eric S. Raymond (current maintainer) 41# John Kunze, Berkeley 42# Craig Leres, Berkeley 43# 44# Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu 45# address is no longer valid. The latest version can always be found at 46# <http://www.tuxedo.org/terminfo>. 47# 48# PURPOSE OF THIS FILE: 49# 50# This file describes the capabilities of various character-cell terminals, 51# as needed by software such as screen-oriented editors. 52# 53# Other terminfo and termcap files exist, supported by various OS vendors 54# or as relics of various older versions of UNIX. This one is the longest 55# and most comprehensive one in existence. It subsumes not only the entirety 56# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL 57# termcap file, but also large numbers of vendor-maintained termcap and 58# terminfo entries more complete and carefully tested than those in historical 59# termcap/terminfo versions. 60# 61# Pointers to related resources (including the ncurses distribution) may 62# be found at <http://www.tuxedo.org/terminfo>. 63# 64# INTERNATIONALIZATION: 65# 66# This file uses only the US-ASCII character set (no ISO8859 characters). 67# 68# This file assumes a US-ASCII character set. If you need to fix this, start 69# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers 70# for your character set. \E(A and \E)A enables the British character set 71# with the pound sign at position 2/3. 72# 73# In a Japanese-processing environment using EUC/Japanese or Shift-JIS, 74# C1 characters are considered the first-byte set of the Japanese encodings, 75# so \E)0 should be avoided in <enacs> and initialization strings. 76# 77# FILE FORMAT: 78# 79# The version you are looking at may be in any of three formats: master 80# (terminfo with OT capabilities), stock terminfo, or termcap. You can tell 81# which by the format given in the header above. 82# 83# The master format is accepted and generated by the terminfo tools in the 84# ncurses suite; it differs from stock (System V-compatible) terminfo only 85# in that it admits a group of capabilities (prefixed `OT') equivalent to 86# various obsolete termcap capabilities. You can, thus, convert from master 87# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if 88# you have ncurses `tic -I' is nicer (among other things, it automatically 89# outputs entries in a canonical form). 90# 91# The termcap version is generated automatically from the master version 92# using tic -C. This filtering leaves in the OT capabilities under their 93# original termcap names. All translated entries fit within the 1023-byte 94# string-table limit of archaic termcap libraries except where explicitly 95# noted below. Note that the termcap translation assumes that your termcap 96# library can handle multiple tc capabilities in an entry. 4.4BSD has this 97# capability. Older versions of GNU termcap, through 1.3, do not. 98# 99# For details on these formats, see terminfo(5) in the ncurses distribution, 100# and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD 101# curses has been declared obsolete by the caretakers of the 4.4BSD sources 102# as of June 1995; they are encouraging everyone to migrate to ncurses. 103# 104# Note: unlike some other distributed terminfo files (Novell Unix & SCO's), 105# no entry in this file has embedded comments. This is so source translation 106# to termcap only has to carry over leading comments. Also, no name field 107# contains embedded whitespace (such whitespace confuses rdist). 108# 109# Further note: older versions of this file were often installed with an editor 110# script (reorder) that moved the most common terminal types to the front of 111# the file. This should no longer be necessary, as the file is now ordered 112# roughly by type frequency with ANSI/VT100 and other common types up front. 113# 114# Some information has been merged in from terminfo files distributed by 115# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information 116# comes from vendors who maintain official terminfos for their hardware 117# (notably DEC and Wyse). 118# 119# A detailed change history is included at the end of this file. 120# 121# FILE ORGANIZATION: 122# 123# Comments in this file begin with # - they cannot appear in the middle 124# of a terminfo/termcap entry (this feature had to be sacrificed in order 125# to allow standard terminfo and termcap syntax to be generated cleanly from 126# the master format). Individual capabilities are commented out by 127# placing a period between the colon and the capability name. 128# 129# The file is divided up into major sections (headed by lines beginning with 130# the string "########") and minor sections (beginning with "####"); do 131# 132# grep "^####" <file> | more 133# 134# to see a listing of section headings. The intent of the divisions is 135# (a) to make it easier to find things, and (b) to order the database so 136# that important and frequently-encountered terminal types are near the 137# front (so that you'll get reasonable search efficiency from a linear 138# search of the termcap form even if you don't use reorder). Minor sections 139# usually correspond to manufacturers or standard terminal classes. 140# Parenthesized words following manufacturer names are type prefixes or 141# product line names used by that manufacturers. 142# 143# HOW TO READ THE ENTRIES: 144# 145# The first name in an entry is the canonical name for the model or 146# type, last entry is a verbose description. Others are mnemonic synonyms for 147# the terminal. 148# 149# Terminal names look like <manufacturer> <model> - <modes/options> 150# The part to the left of the dash, if a dash is present, describes the 151# particular hardware of the terminal. The part to the right may be used 152# for flags indicating special ROMs, extra memory, particular terminal modes, 153# or user preferences. 154# 155# All names should be in lower case, for consistency in typing. 156# 157# The following are conventionally used suffixes: 158# -2p Has two pages of memory. Likewise 4p, 8p, etc. 159# -am Enable auto-margin. 160# -m Monochrome. Suppress color support 161# -mc Magic-cookie. Some terminals (notably older Wyses) can 162# only support one attribute without magic-cookie lossage. 163# Their base entry is usually paired with another that 164# uses magic cookies to support multiple attributes. 165# -nam No auto-margin - suppress <am> capability 166# -nl No labels - suppress soft labels 167# -ns No status line - suppress status line 168# -rv Terminal in reverse video mode (black on white) 169# -s Enable status line. 170# -vb Use visible bell (<flash>) rather than <bel>. 171# -w Wide - in 132 column mode. 172# If a name has multiple suffixes and one is a line height, that one should 173# go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'. 174# 175# Entries with embedded plus signs are designed to be included through use/tc 176# capabilities, not used as standalone entries. 177# 178# To avoid search clashes, some older all-numeric names for terminals have 179# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621). 180# All primary names of terminals now have alphanumeric prefixes. 181# 182# Comments marked "esr" are mostly results of applying the termcap-compiler 183# code packaged with ncurses and contemplating the resulting error messages. 184# In many cases, these indicated obvious fixes to syntax garbled by the 185# composers. In a few cases, I was able to deduce corrected forms for garbled 186# capabilities by looking at context. All the information in the original 187# entries is preserved in the comments. 188# 189# In the comments, terminfo capability names are bracketed with <> (angle 190# brackets). Termcap capability names are bracketed with :: (colons). 191# 192# INTERPRETATION OF USER CAPABILITIES 193# 194# The System V Release 4 and XPG4 terminfo format defines ten string 195# capabilities for use by applications, <u0>...<u9>. In this file, we use 196# certain of these capabilities to describe functions which are not covered 197# by terminfo. The mapping is as follows: 198# 199# u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA) 200# u8 terminal answerback description 201# u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6) 202# u6 cursor position report (equiv. to ANSI/ECMA-48 CPR) 203# 204# The terminal enquire string <u9> should elicit an answerback response 205# from the terminal. Common values for <u9> will be ^E (on older ASCII 206# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals). 207# 208# The cursor position request (<u7>) string should elicit a cursor position 209# report. A typical value (for VT100 terminals) is \E[6n. 210# 211# The terminal answerback description (u8) must consist of an expected 212# answerback string. The string may contain the following scanf(3)-like 213# escapes: 214# 215# %c Accept any character 216# %[...] Accept any number of characters in the given set 217# 218# The cursor position report (<u6>) string must contain two scanf(3)-style 219# %d format elements. The first of these must correspond to the Y coordinate 220# and the second to the %d. If the string contains the sequence %i, it is 221# taken as an instruction to decrement each value after reading it (this is 222# the inverse sense from the cup string). The typical CPR value is 223# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals). 224# 225# These capabilities are used by tack(1m), the terminfo action checker 226# (distributed with ncurses 5.0). 227# 228# TABSET FILES 229# 230# All the entries in this file have been edited to assume that the tabset 231# files directory is /usr/share/tabset, in conformance with the File Hierarchy 232# Standard for Linux and open-source BSD systems. Some vendors (notably Sun) 233# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset. 234# 235# No curses package we know of actually uses these files. If their location 236# is an issue, you will have to hand-patch the file locations before compiling 237# this file. 238# 239# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL 240# 241# As the ANSI/ECMA-48 standard and variants take firmer hold, and as 242# character-cell terminals are increasingly replaced by X displays, much of 243# this file is becoming a historical document (this is part of the reason for 244# the new organization, which puts ANSI types, xterm, Unix consoles, 245# and vt100 up front in confidence that this will catch 95% of new hardware). 246# 247# For the terminal types still alive, I'd like to have manufacturer's 248# contact data (Internet address and/or snail-mail + phone). 249# 250# I'm also interested in enriching the comments so that the latter portions of 251# the file do in fact become a potted history of VDT technology as seen by 252# UNIX hackers. Ideally, I'd like the headers for each manufacturer to 253# include its live/dead/out-of-the-business status, and for as many 254# terminal types as possible to be tagged with information like years 255# of heaviest use, popularity, and interesting features. 256# 257# I'm especially interested in identifying the obscure entries listed under 258# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal 259# wisdom about them gets lost. If you know a lot about obscure old terminals, 260# please go to the terminfo resource page, grab the UFO file (ufo.ti), and 261# eyeball it for things you can identify and describe. 262# 263# If you have been around long enough to contribute, please read the file 264# with this in mind and send me your annotations. 265# 266# COPYRIGHTS AND OTHER DELUSIONS 267# 268# The BSD ancestor of this file had a standard Regents of the University of 269# California copyright with dates from 1980 to 1993. 270# 271# Some information has been merged in from a terminfo file SCO distributes. 272# It has an obnoxious boilerplate copyright which I'm ignoring because they 273# took so much of the content from the ancestral BSD versions of this file 274# and didn't attribute it, thereby violating the BSD Regents' copyright. 275# 276# Not that anyone should care. However many valid functions copyrights may 277# serve, putting one on a termcap/terminfo file with hundreds of anonymous 278# contributors makes about as much sense as copyrighting a wall-full of 279# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous. 280# 281# This file deliberately has no copyright. It belongs to no one and everyone. 282# If you claim you own it, you will merely succeed in looking like a fool. 283# Use it as you like. Use it at your own risk. Copy and redistribute freely. 284# There are no guarantees anywhere. Svaha! 285# 286 287######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES 288# 289# This section describes terminal classes and brands that are still 290# quite common. 291# 292 293#### Specials 294# 295# Special "terminals". These are used to label tty lines when you don't 296# know what kind of terminal is on it. The characteristics of an unknown 297# terminal are the lowest common denominator - they look about like a ti 700. 298# 299 300dumb|80-column dumb tty, 301 am, 302 cols#80, 303 bel=^G, cr=^M, cud1=^J, ind=^J, 304unknown|unknown terminal type, 305 gn, use=dumb, 306lpr|printer|line printer, 307 OTbs, hc, os, 308 cols#132, lines#66, 309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J, 310glasstty|classic glass tty interpreting ASCII control characters, 311 OTbs, am, 312 cols#80, 313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H, 314 kcud1=^J, nel=^M^J, .kbs=^H, 315 316vanilla|dumb tty, 317 OTbs, 318 bel=^G, cr=^M, cud1=^J, ind=^J, 319 320# This is almost the same as "dumb", but with no prespecified width. 321# DEL and ^C are hardcoded to act as kill characters. 322# ^D acts as a line break (just like newline). 323# It also interprets 324# \033];xxx\007 325# for compatibility with xterm -TD 3269term|Plan9 terminal emulator for X, 327 am, 328 OTnl=^J, bel=^G, cud1=^J, 329 330#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities 331# 332# See the end-of-file comment for more on these. 333# 334 335# ANSI capabilities are broken up into pieces, so that a terminal 336# implementing some ANSI subset can use many of them. 337ansi+local1, 338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, 339ansi+local, 340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 341 cuu=\E[%p1%dA, use=ansi+local1, 342ansi+tabs, 343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g, 344ansi+inittabs, 345 it#8, use=ansi+tabs, 346ansi+erase, 347 clear=\E[H\E[J, ed=\E[J, el=\E[K, 348ansi+rca, 349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd, 350ansi+cup, 351 cup=\E[%i%p1%d;%p2%dH, home=\E[H, 352ansi+rep, 353 rep=%p1%c\E[%p2%{1}%-%db, 354ansi+idl1, 355 dl1=\E[M, il1=\E[L, 356ansi+idl, 357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1, 358ansi+idc, 359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6, 360ansi+arrows, 361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 362 khome=\E[H, 363ansi+sgr|ansi graphic renditions, 364 blink=\E[5m, invis=\E[8m, rev=\E[7m, 365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 366 sgr0=\E[0m, 367ansi+sgrso|ansi standout only, 368 rmso=\E[m, smso=\E[7m, 369ansi+sgrul|ansi underline only, 370 rmul=\E[m, smul=\E[4m, 371ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim, 372 bold=\E[1m, 373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, 374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, 375ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold, 376 dim=\E[2m, 377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m, 378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, 379ansi+pp|ansi printer port, 380 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 381ansi+csr|ansi scroll-region plus cursor save & restore, 382 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7, 383 384# The IBM PC alternate character set. Plug this into any Intel console entry. 385# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the 386# ROM graphics for control characters such as the diamond, up- and down-arrow. 387# This works with the System V, Linux, and BSDI consoles. It's a safe bet this 388# will work with any Intel console, they all seem to have inherited \E[11m 389# from the ANSI.SYS de-facto standard. 390klone+acs|alternate character set for ansi.sys displays, 391 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 392 rmacs=\E[10m, smacs=\E[11m, 393 394# Highlight controls corresponding to the ANSI.SYS standard. Most 395# console drivers for Intel boxes obey these. Makes the same assumption 396# about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>, 397# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS. 398klone+sgr|attribute control for ansi.sys displays, 399 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m, 400 rmso=\E[m, rmul=\E[m, 401 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m, 402 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m, 403 use=klone+acs, 404 405# Most Intel boxes do not treat "invis" (invisible) text. 406klone+sgr8|attribute control for ansi.sys displays, 407 invis=\E[8m, 408 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 409 use=klone+sgr, 410 411# Highlight controls corresponding to the ANSI.SYS standard. *All* 412# console drivers for Intel boxes obey these. Does not assume \E[11m will 413# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS 414# diamond and arrow characters under curses. 415klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m), 416 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m, 417 rmul=\E[m, 418 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 419 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, 420 use=klone+acs, 421 422# KOI8-R (RFC1489) acs (alternate character set) 423# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996. 424klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset, 425 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225, 426 rmacs=\E[10m, smacs=\E[11m, 427 428# ANSI.SYS color control. The setab/setaf caps depend on the coincidence 429# between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer 430# but equivalent strings that don't rely on that coincidence: 431# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 432# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 433# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard. 434# They match a subset of ECMA-48. 435klone+color|color control for ansi.sys and ISO6429-compatible displays, 436 colors#8, ncv#3, pairs#64, 437 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 438 439# This is better than klone+color, it doesn't assume white-on-black as the 440# default color pair, but many `ANSI' terminals don't grok the <op> cap. 441ecma+color|color control for ECMA-48-compatible terminals, 442 AX, 443 colors#8, ncv#3, pairs#64, 444 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 445 446# Attribute control for ECMA-48-compatible terminals 447ecma+sgr|attribute capabilities for true ECMA-48 terminals, 448 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8, 449 450# For comparison, here are all the capabilities implied by the Intel 451# Binary Compatibility Standard (level 2) that fit within terminfo. 452# For more detail on this rather pathetic standard, see the comments 453# near the end of this file. 454ibcs2|Intel Binary Compatibility Standard prescriptions, 455 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D, 456 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 457 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, 458 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX, 459 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 460 indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7, 461 smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd, 462 463#### ANSI/ECMA-48 terminals and terminal emulators 464# 465# See near the end of this file for details on ANSI conformance. 466# Don't mess with these entries! Lots of other entries depend on them! 467# 468# This section lists entries in a least-capable to most-capable order. 469# if you're in doubt about what `ANSI' matches yours, try them in that 470# order and back off from the first that breaks. 471 472# ansi-mr is for ANSI terminals with ONLY relative cursor addressing 473# and more than one page of memory. It uses local motions instead of 474# direct cursor addressing, and makes almost no assumptions. It does 475# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen. 476ansi-mr|mem rel cup ansi, 477 am, xon, 478 cols#80, lines#24, use=vanilla, use=ansi+erase, 479 use=ansi+local1, 480 481# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but 482# beware of screen size problems and memory relative cursor addressing. 483ansi-mini|any ansi terminal with pessimistic assumptions, 484 am, xon, 485 cols#80, lines#24, use=vanilla, use=ansi+cup, 486 use=ansi+erase, 487 488# ansi-mtabs adds relative addressing and minimal tab support 489ansi-mtabs|any ansi terminal with pessimistic assumptions, 490 it#8, 491 ht=^I, use=ansi+local1, use=ansi-mini, 492 493# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL 494# 495# The following is an entry for the full ANSI 3.64 (1977). It lacks 496# padding, but most terminals using the standard are "fast" enough 497# not to require any -- even at 9600 bps. If you encounter problems, 498# try including the padding specifications. 499# 500# Note: the :as: and :ae: specifications are not implemented here, for 501# the available termcap documentation does not make clear WHICH alternate 502# character set to specify. ANSI 3.64 seems to make allowances for several. 503# Please make the appropriate adjustments to fit your needs -- that is 504# if you will be using alternate character sets. 505# 506# There are very few terminals running the full ANSI 3.64 standard, 507# so I could only test this entry on one verified terminal (Visual 102). 508# I would appreciate the results on other terminals sent to me. 509# 510# Please report comments, changes, and problems to: 511# 512# U.S. MAIL: Hugh Hansard 513# Box: 22830 514# Emory University 515# Atlanta, GA. 30322. 516# 517# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh. 518# 519# (Added vt100 <rc>,<sc> to quiet a tic warning --esr) 520ansi77|ansi 3.64 standard 1977 version, 521 OTbs, am, mir, 522 cols#80, it#8, lines#24, 523 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 524 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 525 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K, 526 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H, 527 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 528 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, 529 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h, 530 smso=\E[7m, smul=\E[4m, 531 532# Procomm and some other ANSI emulations don't recognize all of the ANSI- 533# standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and 534# <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>, 535# <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to 536# 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem 537# to confuse many emulators. On the other hand, we can count on these programs 538# doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured 539# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under 540# ANSI.SYS influence. 541# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995 542pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode), 543 OTbs, am, mir, msgr, 544 cols#80, it#8, lines#24, 545 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D, 546 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 547 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 548 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 549 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g, 550 use=klone+sgr-dumb, 551pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode), 552 lines#25, use=pcansi-m, 553pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode), 554 lines#33, use=pcansi-m, 555pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode), 556 lines#43, use=pcansi-m, 557# The color versions. All PC emulators do color... 558pcansi|ibm-pc terminal programs claiming to be ansi, 559 use=klone+color, use=pcansi-m, 560pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines, 561 lines#25, use=pcansi, 562pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines, 563 lines#33, use=pcansi, 564pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines, 565 lines#43, use=pcansi, 566 567# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color. 568# If you want pound signs rather than dollars, replace `B' with `A' 569# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities. 570# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 571ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes, 572 mc5i, 573 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 574 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM, 575 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I, 576 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H, 577 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 578 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, 579 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B, 580 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g, 581 vpa=\E[%i%p1%dd, use=pcansi-m, 582 583ansi+enq|ncurses extension for ANSI ENQ, 584 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c, 585 u9=\E[c, 586 587# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in 588# standard terminfo. Assumes ANSI.SYS-compatible attributes and color. 589# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 590ansi|ansi/pc-term compatible with color, 591 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m, 592 593# ansi-generic is a vanilla ANSI terminal. This is assumed to implement 594# all the normal ANSI stuff with no extensions. It assumes 595# insert/delete line/char is there, so it won't work with 596# vt100 clones. It assumes video attributes for bold, blink, 597# underline, and reverse, which won't matter much if the terminal 598# can't do some of those. Padding is assumed to be zero, which 599# shouldn't hurt since xon/xoff is assumed. 600ansi-generic|generic ansi standard terminal, 601 am, xon, 602 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup, 603 use=ansi+rca, use=ansi+erase, use=ansi+tabs, 604 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep, 605 use=ansi+sgrbold, use=ansi+arrows, 606 607#### DOS ANSI.SYS variants 608# 609# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS 610# documentation (except for the keyboard key reassignment feature, which 611# doesn't fit the <pfkey> model well). The klone+acs sequences were valid 612# though undocumented. The <pfkey> capability is untested but should work for 613# keys F1-F10 (%p1 values outside this range will yield unpredictable results). 614# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995 615ansi.sys-old|ANSI.SYS under PC-DOS 2.1, 616 OTbs, am, mir, msgr, xon, 617 cols#80, lines#25, 618 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, 619 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H, 620 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 621 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u, 622 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR, 623 u7=\E[6n, use=klone+color, use=klone+sgr8, 624 625# Keypad: Home=\0G Up=\0H PrPag=\0I 626# ka1,kh kcuu1 kpp,ka3 627# 628# Left=\0K 5=\0L Right=\0M 629# kcub1 kb2 kcuf1 630# 631# End=\0O Down=\0P NxPag=\0Q 632# kc1,kend kcud1 kc3,knp 633# 634# Ins=\0R Del=\0S 635# kich1 kdch1 636# 637# On keyboard with 12 function keys, 638# shifted f-keys: F13-F24 639# control f-keys: F25-F36 640# alt f-keys: F37-F48 641# The shift/control/alt keys do not modify each other, but alt overrides both, 642# and control overrides shift. 643# 644# <pfkey> capability for F1-F48 -TD 645ansi.sys|ANSI.SYS 3.1 and later versions, 646 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q, 647 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, 648 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205, 649 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W, 650 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\, 651 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_, 652 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d, 653 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212, 654 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l, 655 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q, 656 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, 657 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I, 658 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%?%p1%{13}%<%t%'z'%e%?%p1%{23}%<%t%'G'%e%?%p1%{25}%<%t%'p'%e%?%p1%'#'%<%t%'E'%e%?%p1%'%'%<%t%'f'%e%?%p1%'/'%<%t%'C'%e%{92}%;%;%;%;%;%;%;%p1%+%d;%p2"%s"p, 659 use=ansi.sys-old, 660 661# 662# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS. 663# This should only be used when the terminal emulator cannot redefine the keys. 664# Since redefining keys with ansi.sys also affects PC-DOS programs, the key 665# definitions must be restored. If the terminal emulator is quit while in vi 666# or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS. 667# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix 668# (^U and ^D are already defined for tn3270). The ESC is safe for vi but it 669# does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab. 670# Note that <kcub1> is always BS, because PC-dos can tolerate this change. 671# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi. 672# Consequently the End keypad key could not be set (it is relatively safe and 673# actually useful because it sends ^@ O, which beeps and opens a line above). 674ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi, 675 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, 676 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p, 677 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p, 678 use=ansi.sys, 679# 680# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer. 681nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS, 682 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 683 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n, 684 use=ansi.sys, 685# 686# See ansi.sysk and nansi.sys above. 687nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi, 688 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 689 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, 690 use=ansi.sysk, 691 692#### ANSI console types 693 694# 695# Atari ST terminals. 696# From Guido Flohr <gufl0000@stud.uni-sb.de>. 697# 698tw52|tw52-color|Toswin window manager with color, 699 bce, 700 colors#16, pairs#256, 701 oc=\Eb?\Ec0, op=\Eb?\Ec0, 702 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, 703 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, 704 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, 705 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, 706 use=tw52-m, 707tw52-m|Toswin window manager monochrome, 708 ul, 709 ma#999, 710 bold=\Eya, dch1=\Ea, dim=\EyB, 711 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ, 712 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_, 713 smso=\EyQ, smul=\EyH, use=at-m, 714tt52|Atari TT medium and high resolution, 715 lines#30, use=at-color, 716st52-color|at-color|atari-color|atari_st-color|Atari ST with color, 717 bce, 718 colors#16, pairs#256, 719 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0, 720 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, 721 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, 722 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, 723 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, 724 use=st52, 725st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST, 726 am, eo, mir, npc, 727 cols#80, it#8, lines#24, 728 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED, 729 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 730 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I, 731 il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H, 732 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177, 733 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, 734 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ, 735 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW, 736 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea, 737 kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq, 738 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep, 739tw100|toswin vt100 window mgr, 740 eo, mir, msgr, xon, 741 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3, 742 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 743 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef, 744 clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr, 745 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB, 746 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH, 747 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM, 748 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, 749 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H, 750 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177, 751 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, 752 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ, 753 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, 754 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI, 755 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE, 756 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM, 757 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>, 758 rmso=\E[m, rmul=\E[m, 759 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>, 760 sc=\E7, 761 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m, 762 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m, 763 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh, 764 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 765# The entries for stv52 and stv52pc probably need a revision. 766stv52|MiNT virtual console, 767 am, msgr, 768 cols#80, it#8, lines#30, 769 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, 770 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 771 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.", 772 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, 773 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 774 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, 775 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, 776 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, 777 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, 778 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, 779 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, 780 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, 781 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH, 782stv52pc|MiNT virtual console with PC charset, 783 am, msgr, 784 cols#80, it#8, lines#30, 785 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371, 786 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, 787 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 788 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.", 789 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, 790 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 791 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, 792 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, 793 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, 794 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, 795 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, 796 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq, 797 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_, 798 smso=\Ep, smul=\EyH, 799 800#### Atari ST 801# 802 803# From: Simson L. Garfinkel <simsong@media-lab.mit.edu> 804atari-old|atari st, 805 OTbs, am, 806 cols#80, it#8, lines#25, 807 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 808 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 809 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB, 810 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep, 811# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode 812# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu> 813uniterm|uniterm49|UniTerm VT220 emulator with 49 lines, 814 lines#49, 815 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, 816 use=vt220, 817# MiNT VT52 emulation. 80 columns, 25 rows. 818# MiNT is Now TOS, the operating system which comes with all Ataris now 819# (mainly Atari Falcon). This termcap is for the VT52 emulation you get 820# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode 821# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996 822st52-old|Atari ST with VT52 emulation, 823 am, km, 824 cols#80, lines#25, 825 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED, 826 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 827 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, 828 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1, 829 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M, 830 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>, 831 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G, 832 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek, 833 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq, 834 smcup=\Ee, smso=\Ep, 835 836#### BeOS 837# 838# BeOS entry for Terminal program Seems to be almost ANSI 839beterm|BeOS Terminal, 840 am, eo, mir, msgr, xenl, xon, 841 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64, 842 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, 843 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 844 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 845 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 846 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 847 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, 848 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 849 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, 850 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 851 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~, 852 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, 853 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~, 854 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, 855 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, 856 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7, 857 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 858 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm, 859 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m, 860 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, 861 vpa=\E[%i%p1%dd, 862 863#### Linux consoles 864# 865 866# This entry is good for the 1.2.13 or later version of the Linux console. 867# 868# *************************************************************************** 869# * * 870# * WARNING: * 871# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in * 872# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab * 873# * character. Here are the keymap replacement lines that will set this up: * 874# * * 875# keycode 15 = Tab Tab 876# alt keycode 15 = Meta_Tab 877# shift keycode 15 = F26 878# string F26 ="\033[Z" 879# * * 880# * This has to use a key slot which is unfortunate (any unused one will * 881# * do, F26 is the higher-numbered one). The change ought to be built * 882# * into the kernel tables. * 883# * * 884# *************************************************************************** 885# 886# All linux kernels since 1.2.13 (at least) set the screen size 887# themselves; this entry assumes that capability. 888# 889linux-basic|linux console, 890 am, bce, eo, mir, msgr, xenl, xon, 891 it#8, ncv#18, U8#1, 892 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 893 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 894 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 895 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 896 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 897 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, 898 el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H, 899 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 900 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177, 901 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 902 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 903 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 904 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 905 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 906 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 907 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 908 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, 909 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7, 910 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 911 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g, 912 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr, 913 use=ecma+color, 914 915linux-m|Linux console no color, 916 colors@, pairs@, 917 setab@, setaf@, setb@, setf@, use=linux, 918 919# The 1.3.x kernels add color-change capabilities; if yours doesn't have this 920# and it matters, turn off <ccc>. The %02x escape used to implement this is 921# not supposedly back-portable to older SV curses (although it has worked fine 922# on Solaris for several years) and not supported in ncurses versions before 923# 1.9.9. 924linux-c-nc|linux console with color-change, 925 ccc, 926 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x, 927 oc=\E]R, use=linux-basic, 928# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996 929linux-c|linux console 1.3.6+ for older ncurses, 930 ccc, 931 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;, 932 oc=\E]R, use=linux-basic, 933 934# The 2.2.x kernels add a private mode that sets the cursor type; use that to 935# get a block cursor for cvvis. 936# reported by Frank Heckenbach <frank@g-n-u.de>. 937linux2.2|linux 2.2.x console, 938 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c, 939 cvvis=\E[?25h\E[?8c, use=linux-c-nc, 940 941# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here: 942# http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html 943# Using SI/SO has the drawback that it confuses screen. SCS would work. 944# However, SCS is buggy (see comment in Debian #515609) -TD 945linux2.6|linux 2.6.x console, 946 rmacs=^O, 947 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 948 sgr0=\E[m\017, smacs=^N, use=linux2.2, 949 950# The 3.0 kernel adds support for clearing scrollback buffer (capability E3). 951linux3.0|linux 3.0 kernels, 952 E3=\E[3;J, use=linux2.6, 953 954linux|linux console, 955 use=linux3.0, 956 957# Subject: linux 2.6.26 vt back_color_erase 958# Changes to the Linux console driver broke bce model as reported in 959# https://bugzilla.novell.com/show_bug.cgi?id=418613 960# apparently from 961# http://lkml.org/lkml/2008/4/26/305 962# http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e 963linux2.6.26|linux console w/o bce, 964 bce@, use=linux2.6, 965 966# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file 967linux-nic|linux with ich/ich1 suppressed for non-curses programs, 968 ich@, ich1@, use=linux, 969 970# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts. 971# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997. 972linux-koi8|linux with koi8 alternate character set, 973 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224, 974 use=linux, use=klone+koi8acs, 975 976# Another entry for KOI8-r with Qing Long's acsc. 977# (which one better complies with the standard?) 978linux-koi8r|linux with koi8-r alternate character set, 979 use=linux, use=klone+koi8acs, 980 981# Entry for the latin1 and latin2 fonts 982linux-lat|linux with latin1 or latin2 alternate character set, 983 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376, 984 use=linux, 985 986# This uses graphics from VT codeset instead of from cp437. 987# reason: cp437 (aka "straight to font") is not functional under luit. 988# from: Andrey V Lukyanov <land@long.yar.ru>. 989linux-vt|linux console using VT codes for graphics, 990 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, 991 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0, 992 smpch@, use=linux, 993 994# This is based on the Linux console (relies on the console to perform some 995# of the functionality), but does not recognize as many control sequences. 996# The program comes bundled with an old (circa 1998) copy of the Linux 997# console terminfo. It recognizes some non-ANSI/VT100 sequences such as 998# \E* move cursor to home, as as \E[H 999# \E,X same as \E(X 1000# \EE move cursor to beginning of row 1001# \E[y,xf same as \E[y,xH 1002# 1003# Note: The status-line support is buggy (dsl does not work). 1004kon|kon2|jfbterm|Kanji ON Linux console, 1005 ccc@, hs, 1006 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@, 1007 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T, 1008 use=linux, 1009 1010# 16-color linux console entry; this works with a 256-character 1011# console font but bright background colors turn into dim ones when 1012# you use a 512-character console font. This uses bold for bright 1013# foreground colors and blink for bright background colors. 1014linux-16color|linux console with 16 colors, 1015 colors#16, ncv#54, pairs#256, 1016 setab=\E[4%p1%{8}%m%d%?%p1%{8}%>%t;5%e%p1%{8}%=%t;2%e;25%;m, 1017 setaf=\E[3%p1%{8}%m%d%?%p1%{8}%>%t;1%e%p1%{8}%=%t;2%e;21%;m, 1018 use=linux, 1019 1020# bterm (bogl 0.1.18) 1021# Implementation is in bogl-term.c 1022# Key capabilities from linux terminfo entry 1023# 1024# Notes: 1025# bterm only supports acs using wide-characters, has case for these: qjxamlkut 1026# bterm does not support sgr, since it only processes one parameter -TD 1027bterm|bogl virtual terminal, 1028 am, bce, 1029 colors#8, cols#80, lines#24, pairs#64, 1030 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l, 1031 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J, 1032 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J, 1033 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 1034 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, 1035 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 1036 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 1037 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, 1038 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 1039 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 1040 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, 1041 op=\E49;39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m, 1042 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1043 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m, 1044 1045#### Mach 1046# 1047 1048# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk> 1049mach|Mach Console, 1050 am, km, 1051 cols#80, it#8, lines#25, 1052 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, 1053 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 1054 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1055 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 1056 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, 1057 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 1058 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ, 1059 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 1060 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U, 1061 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m, 1062 smso=\E[7m, smul=\E[4m, 1063mach-bold|Mach Console with bold instead of underline, 1064 rmul=\E[0m, smul=\E[1m, use=mach, 1065mach-color|Mach Console with ANSI color, 1066 colors#8, pairs#64, 1067 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m, 1068 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach, 1069 1070# From: Marcus Brinkmann 1071# http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/ 1072# 1073# Comments in the original are summarized here: 1074# 1075# hurd uses 8-bit characters (km). 1076# 1077# Although it doesn't do XON/XOFF, we don't want padding characters (xon). 1078# 1079# Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't 1080# have the eat_newline_glitch. It doesn't support setting or removing tab 1081# stops (hts/tbc). 1082# 1083# hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is 1084# one byte instead three. 1085# 1086# <ich1> is not included because hurd has insert mode. 1087# 1088# hurd doesn't use ^J for scrolling, because this could put things into the 1089# scrollback buffer. 1090# 1091# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode. 1092# This is a GNU extension. 1093# 1094# The original has commented-out ncv, but is restored here. 1095# 1096# Reading the source, RIS resets cnorm, but not xmous. 1097hurd|The GNU Hurd console server, 1098 am, bce, bw, eo, km, mir, msgr, xon, 1099 colors#8, it#8, ncv#18, pairs#64, 1100 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 1101 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 1102 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 1103 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 1104 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1105 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP, 1106 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 1107 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg, 1108 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, 1109 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, 1110 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD, 1111 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, 1112 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 1113 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 1114 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 1115 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~, 1116 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 1117 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 1118 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T, 1119 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l, 1120 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7, 1121 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1122 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 1123 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h, 1124 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, 1125 gsbom=\E[>1h, 1126 1127#### OSF Unix 1128# 1129 1130# OSF/1 1.1 Snapshot 2 1131pmcons|pmconsole|PMAX console, 1132 am, 1133 cols#128, lines#57, 1134 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I, 1135 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 1136 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 1137 1138# SCO console and SOS-Syscons console for 386bsd 1139# (scoansi: had unknown capabilities 1140# :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\ 1141# :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C: 1142# :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\ 1143# :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\ 1144# :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\ 1145# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based 1146# on the <smacs>=\E[12m -- esr) 1147# 1148# klone+sgr-dumb is an error since the acsc does not match -TD 1149# 1150# In this description based on SCO's keyboard(HW) manpage list of default 1151# function key values: 1152# F13-F24 are shifted F1-F12 1153# F25-F36 are control F1-F12 1154# F37-F48 are shift+control F1-F12 1155# 1156# hpa/vpa work in the console, but not in scoterm: 1157# hpa=\E[%p1%dG, 1158# vpa=\E[%p1%dd, 1159# 1160# SCO's terminfo uses 1161# kLFT=\E[d, 1162# kRIT=\E[c, 1163# which do not work (console or scoterm). 1164# 1165# Console documents only 3 attributes can be set with SGR (so we don't use sgr). 1166scoansi-old|SCO Extended ANSI standard crt (5.0.5), 1167 OTbs, am, bce, eo, xon, 1168 colors#8, cols#80, it#8, lines#25, pairs#64, 1169 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207, 1170 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 1171 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C, 1172 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 1173 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1174 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP, 1175 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M, 1176 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I, 1177 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 1178 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H, 1179 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 1180 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, 1181 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, 1182 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, 1183 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, 1184 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, 1185 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, 1186 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, 1187 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], 1188 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, 1189 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 1190 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, 1191 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, 1192 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7, 1193 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, 1194 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, 1195scoansi-new|SCO Extended ANSI standard crt (5.0.6), 1196 km, 1197 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr, 1198 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m, 1199 rep=\E[%p1%d;%p2%db, rmm=\E[=11L, 1200 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 1201 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm, 1202 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m, 1203 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m, 1204 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L, 1205 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr, 1206 use=scoansi-old, 1207# make this easy to change... 1208scoansi|SCO Extended ANSI standard crt, 1209 use=scoansi-old, 1210 1211# This actually describes the generic SVr4 display driver for Intel boxes. 1212# The <dim=\E[2m> isn't documented and therefore may not be reliable. 1213# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995 1214att6386|at386|386at|AT&T WGS 6386 console, 1215 am, bw, eo, xon, 1216 cols#80, it#8, lines#25, 1217 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 1218 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C, 1219 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD, 1220 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 1221 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 1222 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 1223 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 1224 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 1225 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, 1226 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H, 1227 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 1228 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, 1229 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 1230 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, 1231 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m, 1232 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, 1233 sc=\E7, 1234 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m, 1235 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, 1236 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color, 1237# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr) 1238pc6300plus|AT&T 6300 plus, 1239 OTbs, am, xon, 1240 cols#80, lines#24, 1241 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C, 1242 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B, 1243 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, 1244 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K, 1245 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J, 1246 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 1247 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe, 1248 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk, 1249 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 1250 smso=\E[7m, smul=\E[4m, tbc=\E[3g, 1251 1252# From: Benjamin C. W. Sittler <bsittler@nmt.edu> 1253# 1254# I have a UNIX PC which I use as a terminal attached to my Linux PC. 1255# Unfortunately, the UNIX PC terminfo entry that comes with ncurses 1256# is broken. All the special key sequences are broken, making it unusable 1257# with Emacs. The problem stems from the following: 1258# 1259# The UNIX PC has a plethora of keys (103 of them, and there's no numeric 1260# keypad!), loadable fonts, and strange highlighting modes ("dithered" 1261# half-intensity, "smeared" bold, and real strike-out, for example.) It also 1262# uses resizable terminal windows, but the bundled terminal program always 1263# uses an 80x24 window (and doesn't support seem to support a 132-column 1264# mode.) 1265# 1266# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a 1267# library which was a superset of SVr3.5 curses (called tam, for "terminal 1268# access method".) tam includes support for real, overlapping windows, 1269# onscreen function key labels, and bitmap graphics. But since the primary 1270# user interface on the UNIX PC was a GUI program (ua, for "user 1271# assistant",) and remote administration was considered important for the 1272# machine, tam also supported VT100-compatible terminals attached to the 1273# serial port or used across the StarLan network. To simulate the extra keys 1274# not present on a VT100, users could press ESC and a two-letter sequence, 1275# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences, 1276# however, were not the same as those sent by the actual Undo key. The 1277# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example. 1278# (If you're interested in adding some of the tam calls to ncurses, btw, I 1279# have the full documentation and several programs which use tam. It also 1280# used an extended terminfo format to describe key sequences, special 1281# highlighting modes, etc.) 1282# 1283# KEYS: This means that ncurses would quite painful on the UNIX PC, since 1284# there are two sequences for every key-modifier combination (local keyboard 1285# sequence and remote "VT100" sequence.) But I doubt many people are trying 1286# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the 1287# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume) 1288# seem to have been built from the manual describing the VT100 sequences. 1289# This means it doesn't work for a real live UNIX PC. 1290# 1291# FONTS: The UNIX PC also has a strange interpretation of "alternate 1292# character set". Rather than the VT100 graphics you might expect, it allows 1293# up to 8 custom fonts to be loaded at any given time. This means that 1294# programs expecting VT100 graphics will usually be disappointed. For this 1295# reason I have disabled the smacs/rmacs sequences, but they could easily be 1296# re-enabled. Here are the relevant control sequences (from the ESCAPE(7) 1297# manpage), should you wish to do so: 1298# 1299# SGR10 - Select font 0 - ESC [ 10 m or SO 1300# SGR11 - Select font 1 - ESC [ 11 m or SI 1301# SGR12 - Select font 2 - ESC [ 12 m 1302# ... (etc.) 1303# SGR17 - Select font 7 - ESC [ 17 m 1304# 1305# Graphics for line drawing are not reliably found at *any* character 1306# location because the UNIX PC has dynamically reloadable fonts. I use font 1307# 0 for regular text and font 1 for italics, but this is by no means 1308# universal. So ASCII line drawing is in order if smacs/rmacs are enabled. 1309# 1310# MISC: The cursor visible/cursor invisible sequences were swapped in the 1311# distributed terminfo. 1312# 1313# To ameliorate these problems (and fix a few highlighting bugs) I rewrote 1314# the UNIX PC terminfo entry. The modified version works great with Lynx, 1315# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC 1316# attached by serial cable. In Emacs, even the Undo key works, and many 1317# applications can now use the F1-F8 keys. 1318# 1319# esr's notes: 1320# Terminfo entry for the AT&T Unix PC 7300 1321# from escape(7) in Unix PC 7300 Manual. 1322# Somewhat similar to a vt100-am (but different enough 1323# to redo this from scratch.) 1324# 1325# /*************************************************************** 1326# * 1327# * FONT LOADING PROGRAM FOR THE UNIX PC 1328# * 1329# * This routine loads a font defined in the file ALTFONT 1330# * into font memory slot #1. Once the font has been loaded, 1331# * it can be used as an alternative character set. 1332# * 1333# * The call to ioctl with the argument WIOCLFONT is the key 1334# * to this routine. For more information, see window(7) in 1335# * the PC 7300 documentation. 1336# ***************************************************************/ 1337# #include <string.h> /* needed for strcpy call */ 1338# #include <sys/window.h> /* needed for ioctl call */ 1339# #define FNSIZE 60 /* font name size */ 1340# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */ 1341# /* 1342# * The file /usr/lib/wfont/special.8.ft comes with the 1343# * standard PC software. It defines a graphics character set 1344# * similar to that of the Teletype 5425 terminal. To view 1345# * this or other fonts in /usr/lib/wfont, use the command 1346# * cfont <filename>. For further information on fonts see 1347# * cfont(1) in the PC 7300 documentation. 1348# */ 1349# 1350# struct altfdata /* structure for alt font data */ 1351# { 1352# short altf_slot; /* memory slot number */ 1353# char altf_name[FNSIZE]; /* font name (file name) */ 1354# }; 1355# ldfont() 1356# { 1357# int wd; /* window in which altfont will be */ 1358# struct altfdata altf; 1359# altf.altf_slot=1; 1360# strcpy(altf.altf_name,ALTFONT); 1361# for (wd =1; wd < 12; wd++) { 1362# ioctl(wd, WIOCLFONT,&altf); 1363# } 1364# } 1365# 1366# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry, 1367# they're confirmed by the man page for the System V display---esr) 1368# 1369att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300, 1370 am, xon, 1371 cols#80, it#8, lines#24, 1372 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C, 1373 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, 1374 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 1375 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 1376 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 1377 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL, 1378 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB, 1379 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, 1380 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM, 1381 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, 1382 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, 1383 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z, 1384 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 1385 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, 1386 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd, 1387 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 1388 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B, 1389 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv, 1390 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, 1391 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB, 1392 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM, 1393 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m, 1394 smul=\E[4m, 1395 1396# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is 1397# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes 1398# for the application keypad mode. We have added iris-ansi-ap rather than 1399# change the original to keypad mode. 1400# 1401# (iris-ansi: added rmam/smam based on init string -- esr) 1402# 1403# This entry, and those derived from it, is used in xwsh (also known as 1404# winterm). Some capabilities that do not fit into the terminfo model 1405# include the shift- and control-functionkeys: 1406# 1407# F1-F12 generate different codes when shift or control modifiers are used. 1408# For example: 1409# F1 \E[001q 1410# shift F1 \E[013q 1411# control-F1 \E[025q 1412# 1413# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e., 1414# \EOP to \EOS. The shifted and control modifiers still do the same thing. 1415# 1416# The cursor keys also have different codes: 1417# control-up \E[162q 1418# control-down \E[165q 1419# control-left \E[159q 1420# control-right \E[168q 1421# 1422# shift-up \E[161q 1423# shift-down \E[164q 1424# shift-left \E[158q 1425# shift-right \E[167q 1426# 1427# control-tab \[072q 1428# 1429iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100), 1430 am, 1431 cols#80, it#8, lines#40, 1432 bel=^G, bold=\E[1m, clear=\E[H\E[2J, 1433 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD, 1434 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, 1435 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 1436 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h, 1437 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 1438 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED, 1439 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P, 1440 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q, 1441 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 1442 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, 1443 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q, 1444 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, 1445 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, 1446 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, 1447 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, 1448 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, 1449 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, 1450 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m, 1451 tbc=\E[3g, 1452iris-ansi-ap|IRIS ANSI in application-keypad mode, 1453 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q, 1454 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi, 1455 1456# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX 1457# (T.Dickey 98/1/24) 1458iris-color|xwsh|IRIX ANSI with color, 1459 ncv#33, 1460 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m, 1461 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m, 1462 rmul=\E[24m, rs1=\Ec, 1463 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 1464 sitm=\E[3m, use=vt100+enq, use=klone+color, 1465 use=iris-ansi-ap, 1466 1467# The following is a version of the ibm-pc entry distributed with PC/IX, 1468# (Interactive Systems' System 3 for the Big Blue), modified by Richard 1469# McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original, 1470# (the former is untrue, and the latter failed under UCB/man); standout and 1471# underline modes have been added. Note: this entry describes the "native" 1472# capabilities of the PC monochrome display, without ANY emulation; most 1473# communications packages (but NOT PC/IX connect) do some kind of emulation. 1474pcix|PC/IX console, 1475 am, bw, eo, 1476 cols#80, lines#24, 1477 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 1478 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, 1479 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, 1480 smul=\E[4m, 1481 1482# (ibmpcx: this entry used to be known as ibmx. 1483# It formerly included the following extension capabilities: 1484# :GC=b:GL=v:GR=t:RT=^J:\ 1485# :GH=\E[196g:GV=\E[179g:\ 1486# :GU=\E[193g:GD=\E[194g:\ 1487# :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\ 1488# :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\ 1489# :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\ 1490# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate 1491# ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match 1492# what was there before. -- esr) 1493ibmpcx|xenix|ibmx|IBM PC xenix console display, 1494 OTbs, am, msgr, 1495 cols#80, lines#25, 1496 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C, 1497 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 1498 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H, 1499 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d, 1500 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e, 1501 kpp=\E[Z, use=klone+acs, use=klone+sgr8, 1502 1503#### QNX 1504# 1505 1506# QNX 4.0 Console 1507# Michael's original version of this entry had <am@>, <smcup=\Ei>, 1508# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower 1509# right corner without triggering a scroll. The ncurses terminfo library can 1510# handle this case with the <ich1> capability, and prefers <am> for better 1511# optimization. Bug: The <op> capability resets attributes. 1512# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996 1513# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>) 1514qnx|qnx4|qnx console, 1515 daisy, km, mir, msgr, xhpa, xt, 1516 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8, 1517 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263, 1518 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ, 1519 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 1520 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2, 1521 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee, 1522 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263, 1523 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364, 1524 kDL=\377\366, kEND=\377\301, kEOL=\377\311, 1525 kEXT=\377\367, kFND=\377\370, kHLP=\377\371, 1526 kHOM=\377\260, kIC=\377\340, kLFT=\377\264, 1527 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272, 1528 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262, 1529 kRDO=\377\315, kRES=\377\374, kRIT=\377\266, 1530 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303, 1531 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0, 1532 kclo=\377\343, kclr=\377\341, kcmd=\377\245, 1533 kcpy=\377\265, kcrt=\377\305, kctab=\377\237, 1534 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246, 1535 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274, 1536 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320, 1537 kext=\377\270, kf1=\377\201, kf10=\377\212, 1538 kf11=\377\256, kf12=\377\257, kf13=\377\213, 1539 kf14=\377\214, kf15=\377\215, kf16=\377\216, 1540 kf17=\377\217, kf18=\377\220, kf19=\377\221, 1541 kf2=\377\202, kf20=\377\222, kf21=\377\223, 1542 kf22=\377\224, kf23=\377\333, kf24=\377\334, 1543 kf25=\377\225, kf26=\377\226, kf27=\377\227, 1544 kf28=\377\230, kf29=\377\231, kf3=\377\203, 1545 kf30=\377\232, kf31=\377\233, kf32=\377\234, 1546 kf33=\377\235, kf34=\377\236, kf35=\377\276, 1547 kf36=\377\277, kf37=\377\321, kf38=\377\322, 1548 kf39=\377\323, kf4=\377\204, kf40=\377\324, 1549 kf41=\377\325, kf42=\377\326, kf43=\377\327, 1550 kf44=\377\330, kf45=\377\331, kf46=\377\332, 1551 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206, 1552 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346, 1553 khlp=\377\350, khome=\377\240, khts=\377\342, 1554 kich1=\377\253, kil1=\377\273, kind=\377\261, 1555 kmov=\377\351, kmrk=\377\355, kmsg=\377\345, 1556 knp=\377\252, knxt=\377\312, kopn=\377\357, 1557 kopt=\377\353, kpp=\377\242, kprt=\377\255, 1558 kprv=\377\302, krdo=\377\336, kref=\377\354, 1559 kres=\377\360, krfr=\377\347, kri=\377\271, 1560 krmir=\377\313, krpl=\377\362, krst=\377\352, 1561 ksav=\377\361, kslt=\377\247, kspd=\377\335, 1562 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER, 1563 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER, 1564 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d, 1565 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei, 1566 smso=\E(, smul=\E[, 1567# 1568# 1569qnxt|qnxt4|QNX4 terminal, 1570 crxm, use=qnx4, 1571# 1572qnxm|QNX4 with mouse events, 1573 maddr#1, 1574 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h, 1575 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l, 1576 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l, 1577 smicm=\E/>2h, use=qnx4, 1578# 1579qnxw|QNX4 windows, 1580 xvpa, use=qnxm, 1581# 1582# Monochrome QNX4 terminal or console. Setting this terminal type will 1583# allow an application running on a color console to behave as if it 1584# were a monochrome terminal. Output will be through stdout instead of 1585# console writes because the term routines will recognize that the 1586# terminal name starts with 'qnxt'. 1587# 1588qnxtmono|Monochrome QNX4 terminal or console, 1589 colors@, pairs@, 1590 scp@, use=qnx4, 1591 1592# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998 1593# (esr: commented out <scp> and <rmcup> to avoid warnings.) 1594# (TD: derive from original qnx4 entry) 1595qnxt2|qnx 2.15 serial terminal, 1596 am, 1597 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@, 1598 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4, 1599 1600# QNX ANSI terminal definition 1601qansi-g|QNX ANSI, 1602 am, eslok, hs, xon, 1603 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80, 1604 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 1605 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 1606 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M, 1607 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 1608 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1609 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A, 1610 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 1611 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J, 1612 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l, 1613 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 1614 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, 1615 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m, 1616 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0, 1617 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt, 1618 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h, 1619 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c, 1620 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa, 1621 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B, 1622 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y, 1623 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, 1624 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt, 1625 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx, 1626 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~, 1627 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~, 1628 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~, 1629 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~, 1630 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~, 1631 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~, 1632 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU, 1633 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh, 1634 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a, 1635 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo, 1636 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg, 1637 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T, 1638 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m, 1639 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T, 1640 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m, 1641 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l, 1642 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 1643 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 1644 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 1645 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;, 1646 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m, 1647 smul=\E[4m, tbc=\E[3g, 1648 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, 1649# 1650qansi|QNX ansi with console writes, 1651 daisy, xhpa, use=qansi-g, 1652# 1653qansi-t|QNX ansi without console writes, 1654 crxm, use=qansi, 1655# 1656qansi-m|QNX ansi with mouse, 1657 maddr#1, 1658 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h, 1659 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l, 1660 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l, 1661 smicm=\E[>2h, use=qansi, 1662# 1663qansi-w|QNX ansi for windows, 1664 xvpa, use=qansi-m, 1665 1666#### NetBSD consoles 1667# 1668# pcvt termcap database entries (corresponding to release 3.31) 1669# Author's last edit-date: [Fri Sep 15 20:29:10 1995] 1670# 1671# (For the terminfo master file, I translated these into terminfo syntax. 1672# Then I dropped all the pseudo-HP entries. we don't want and can't use 1673# the :Xs: flag. Then I split :is: into a size-independent <is1> and a 1674# size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr) 1675 1676# NOTE: <ich1> has been taken out of this entry. for reference, it should 1677# be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below. 1678# (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583) 1679pcvtXX|pcvt vt200 emulator (DEC VT220), 1680 am, km, mir, msgr, xenl, 1681 it#8, vt#3, 1682 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, 1683 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 1684 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 1685 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 1686 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1687 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1688 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 1689 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 1690 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, 1691 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177, 1692 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 1693 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, 1694 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 1695 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~, 1696 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, 1697 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, 1698 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 1699 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 1700 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 1701 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 1702 1703# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) 1704# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and 1705# 50 lines entries; 80 columns 1706pcvt25|dec vt220 emulation with 25 lines, 1707 cols#80, lines#25, 1708 is2=\E[1;25r\E[25;1H, use=pcvtXX, 1709pcvt28|dec vt220 emulation with 28 lines, 1710 cols#80, lines#28, 1711 is2=\E[1;28r\E[28;1H, use=pcvtXX, 1712pcvt35|dec vt220 emulation with 35 lines, 1713 cols#80, lines#35, 1714 is2=\E[1;35r\E[35;1H, use=pcvtXX, 1715pcvt40|dec vt220 emulation with 40 lines, 1716 cols#80, lines#40, 1717 is2=\E[1;40r\E[40;1H, use=pcvtXX, 1718pcvt43|dec vt220 emulation with 43 lines, 1719 cols#80, lines#43, 1720 is2=\E[1;43r\E[43;1H, use=pcvtXX, 1721pcvt50|dec vt220 emulation with 50 lines, 1722 cols#80, lines#50, 1723 is2=\E[1;50r\E[50;1H, use=pcvtXX, 1724 1725# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) 1726# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and 1727# 50 lines entries; 132 columns 1728pcvt25w|dec vt220 emulation with 25 lines and 132 cols, 1729 cols#132, lines#25, 1730 is2=\E[1;25r\E[25;1H, use=pcvtXX, 1731pcvt28w|dec vt220 emulation with 28 lines and 132 cols, 1732 cols#132, lines#28, 1733 is2=\E[1;28r\E[28;1H, use=pcvtXX, 1734pcvt35w|dec vt220 emulation with 35 lines and 132 cols, 1735 cols#132, lines#35, 1736 is2=\E[1;35r\E[35;1H, use=pcvtXX, 1737pcvt40w|dec vt220 emulation with 40 lines and 132 cols, 1738 cols#132, lines#40, 1739 is2=\E[1;40r\E[40;1H, use=pcvtXX, 1740pcvt43w|dec vt220 emulation with 43 lines and 132 cols, 1741 cols#132, lines#43, 1742 is2=\E[1;43r\E[43;1H, use=pcvtXX, 1743pcvt50w|dec vt220 emulation with 50 lines and 132 cols, 1744 cols#132, lines#50, 1745 is2=\E[1;50r\E[50;1H, use=pcvtXX, 1746 1747# OpenBSD implements a color variation 1748pcvt25-color|dec vt220 emulation with 25 lines and color, 1749 cols#80, lines#25, 1750 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~, 1751 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 1752 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 1753 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~, 1754 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX, 1755 use=ecma+color, 1756 1757# Terminfo entries to enable the use of the ncurses library in colour on a 1758# NetBSD-arm32 console (only tested on a RiscPC). 1759# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98 1760# modified codes for setf/setb to setaf/setab, then to klone+color, corrected 1761# typo in invis - TD 1762arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480), 1763 am, bce, msgr, xenl, xon, 1764 cols#80, it#8, lines#30, 1765 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 1766 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 1767 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 1768 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 1769 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 1770 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 1771 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 1772 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, 1773 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H, 1774 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 1775 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x, 1776 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v, 1777 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, 1778 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, 1779 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 1780 sc=\E7, 1781 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>, 1782 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 1783 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr, 1784 use=klone+color, 1785 1786arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768), 1787 cols#132, lines#50, use=arm100, 1788 1789# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine 1790# manufactured by Sharp for the Japenese market. 1791# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996 1792x68k|x68k-ite|NetBSD/x68k ITE, 1793 cols#96, lines#32, 1794 kclr=\E[9~, khlp=\E[28~, use=vt220, 1795 1796# <tv@pobox.com>: 1797# Entry for the DNARD OpenFirmware console, close to ANSI but not quite. 1798# 1799# (still unfinished, but good enough so far.) 1800ofcons|DNARD OpenFirmware console, 1801 bw, 1802 cols#80, lines#30, 1803 bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M, 1804 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, 1805 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 1806 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, 1807 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K, 1808 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL, 1809 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D, 1810 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P, 1811 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W, 1812 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r, 1813 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m, 1814 rmso=\2330m, rmul=\2330m, 1815 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 1816 sgr0=\2330m, 1817 1818# NetBSD "wscons" emulator in vt220 mode. 1819# This entry is based on the NetBSD termcap entry, correcting the ncv value. 1820# The emulator renders underlined text in red. Colors are otherwise usable. 1821# 1822# Testing the emulator and reading the source code (NetBSD 2.0), it appears 1823# that "vt220" is inaccurate. There are a few vt220-features, but most of the 1824# vt220 screens in vttest do not work with this emulator. For instance, it 1825# identifies itself (primary DA response) as a vt220 with selective erase. But 1826# the selective erase feature does not work. The secondary response is copied 1827# from Kermit's emulation of vt220, does not correspond to actual vt220. At 1828# the level of detail in a termcap, it is a passable emulator, since ECH does 1829# work. Don't use it on a VMS system -TD 1830wsvt25|NetBSD wscons in 25 line DEC VT220 mode, 1831 bce, msgr, 1832 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64, 1833 is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~, 1834 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, 1835 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 1836 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec, 1837 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220, 1838 1839wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta, 1840 km, use=wsvt25, 1841 1842# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and 1843# DECstation/pmax. 1844rcons|BSD rasterconsole, 1845 use=sun-il, 1846# Color version of above. Color currently only provided by NetBSD. 1847rcons-color|BSD rasterconsole with ANSI color, 1848 bce, 1849 colors#8, pairs#64, 1850 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons, 1851 1852# mgterm -- MGL/MGL2, MobileGear Graphic Library 1853# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k} 1854# -- the setf/setb are probably incorrect, more likely setaf/setab -TD 1855# -- compare with cons25w 1856mgterm, 1857 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc, 1858 colors#8, cols#80, it#8, lines#18, pairs#64, 1859 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 1860 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 1861 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1862 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1863 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM, 1864 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 1865 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, 1866 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 1867 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 1868 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, 1869 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N, 1870 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, 1871 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, 1872 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, 1873 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm, 1874 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, 1875 1876#### FreeBSD console entries 1877# 1878# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996 1879# Andrey Chernov maintains the FreeBSD termcap distributions. 1880# 1881# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade 1882# or comment out the :cb: capability in the console entry. 1883# 1884# Alexander Lukyanov reports: 1885# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there. 1886# Now el1 clears not only to the line beginning, but also a large chunk 1887# of previous line. But there is another bug - ech does not work at all. 1888# 1889 1890# for syscons 1891# common entry without semigraphics 1892# Bug: The <op> capability resets attributes. 1893# Bug? The ech and el1 attributes appear to move the cursor in some cases; for 1894# instance el1 does if the cursor is moved to the right margin first. Removed 1895# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K) 1896# 1897# Setting colors turns off reverse; we cannot guarantee order, so use ncv. 1898# Note that this disables standout with color. 1899# 1900# The emulator sends difference strings based on shift- and control-keys, 1901# like scoansi: 1902# F13-F24 are shifted F1-F12 1903# F25-F36 are control F1-F12 1904# F37-F48 are shift+control F1-F12 1905cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode), 1906 am, bce, bw, eo, msgr, npc, 1907 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64, 1908 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 1909 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, 1910 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1911 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1912 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, 1913 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 1914 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, 1915 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 1916 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 1917 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, 1918 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y, 1919 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d, 1920 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h, 1921 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m, 1922 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q, 1923 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v, 1924 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z, 1925 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^, 1926 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R, 1927 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L, 1928 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, 1929 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, 1930 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1931 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m, 1932 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, 1933cons25|ansis|ansi80x25|freebsd console (25-line ansi mode), 1934 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371, 1935 use=cons25w, 1936cons25-debian|freebsd console with debian backspace (25-line ansi mode), 1937 kbs=\177, kdch1=\E[3~, use=cons25, 1938cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode), 1939 colors@, pairs@, 1940 bold@, dim@, op@, rmul=\E[m, setab@, setaf@, 1941 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m, 1942 smul=\E[4m, use=cons25, 1943cons30|ansi80x30|freebsd console (30-line ansi mode), 1944 lines#30, use=cons25, 1945cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode), 1946 lines#30, use=cons25-m, 1947cons43|ansi80x43|freebsd console (43-line ansi mode), 1948 lines#43, use=cons25, 1949cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode), 1950 lines#43, use=cons25-m, 1951cons50|ansil|ansi80x50|freebsd console (50-line ansi mode), 1952 lines#50, use=cons25, 1953cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode), 1954 lines#50, use=cons25-m, 1955cons60|ansi80x60|freebsd console (60-line ansi mode), 1956 lines#60, use=cons25, 1957cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode), 1958 lines#60, use=cons25-m, 1959cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic, 1960 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225, 1961 use=cons25w, 1962cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono), 1963 colors@, pairs@, 1964 op@, rmul=\E[m, setab@, setaf@, 1965 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m, 1966 smul=\E[4m, use=cons25r, 1967cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines), 1968 lines#50, use=cons25r, 1969cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono), 1970 lines#50, use=cons25r-m, 1971cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines), 1972 lines#60, use=cons25r, 1973cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono), 1974 lines#60, use=cons25r-m, 1975# ISO 8859-1 FreeBSD console 1976cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars, 1977 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237, 1978 use=cons25w, 1979cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono), 1980 colors@, pairs@, 1981 bold@, dim@, op@, rmul=\E[m, setab@, setaf@, 1982 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m, 1983 smul=\E[4m, use=cons25l1, 1984cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines), 1985 lines#50, use=cons25l1, 1986cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono), 1987 lines#50, use=cons25l1-m, 1988cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines), 1989 lines#60, use=cons25l1, 1990cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono), 1991 lines#60, use=cons25l1-m, 1992 1993#### 386BSD and BSD/OS Consoles 1994# 1995 1996# This was the original 386BSD console entry (I think). 1997# Some places it's named oldpc3|oldibmpc3. 1998# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu> 1999origpc3|origibmpc3|IBM PC 386BSD Console, 2000 OTbs, am, bw, eo, xon, 2001 cols#80, lines#25, 2002 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 2003 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 2004 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, 2005 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 2006 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x, 2007 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x, 2008 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x, 2009 2010# description of BSD/386 console emulator in version 1.0 (supplied by BSDI) 2011oldpc3|oldibmpc3|old IBM PC BSD/386 Console, 2012 OTbs, km, 2013 lines#25, 2014 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M, 2015 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 2016 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F, 2017 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R, 2018 2019# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1 2020# Note, the emulator supports many of the additional console features 2021# listed in the iBCS2 (e.g. character-set selection) though not all 2022# are described here. This entry really ought to be upgraded. 2023# Also note, the console will also work with fewer lines after doing 2024# "stty rows NN", e.g. to use 24 lines. 2025# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996) 2026# Bug: The <op> capability resets attributes. 2027bsdos-pc|IBM PC BSD/OS Console, 2028 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 2029 use=bsdos-pc-nobold, 2030 2031bsdos-pc-nobold|BSD/OS PC console w/o bold, 2032 use=klone+color, use=bsdos-pc-m, 2033 2034bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono, 2035 OTbs, am, eo, km, xon, 2036 cols#80, it#8, lines#25, 2037 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H, 2038 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2039 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2040 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 2041 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, 2042 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, 2043 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7, 2044 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;, 2045 use=klone+sgr8, 2046 2047# Old names for BSD/OS PC console used in releases before 4.1. 2048pc3|BSD/OS on the PC Console, 2049 use=bsdos-pc-nobold, 2050ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline, 2051 use=bsdos-pc, 2052 2053# BSD/OS on the SPARC 2054bsdos-sparc|Sun SPARC BSD/OS Console, 2055 use=sun, 2056 2057# BSD/OS on the PowerPC 2058bsdos-ppc|PowerPC BSD/OS Console, 2059 use=bsdos-pc, 2060 2061#### DEC VT52 2062# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr) 2063# 2064# Actually (TD pointed this out at the time the acsc string was added): 2065# vt52 shouldn't define full acsc since most of the cells don't match. 2066# see vt100 manual page A-31. This is the list that does match: 2067# f degree 2068# g plus/minus 2069# h right-arrow 2070# k down-arrow 2071# m scan-1 2072# o scan-3 2073# q scan-5 2074# s scan-7 2075# The line-drawing happens to work in several terminal emulators, but should 2076# not be used as a guide to the capabilities of the vt52. Note in particular 2077# that vt52 does not support line-drawing characters (the scan-X values refer 2078# to a crude plotting feature) -TD 2079vt52|dec vt52, 2080 OTbs, 2081 cols#80, it#8, lines#24, 2082 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M, 2083 cub1=\ED, cud1=\EB, cuf1=\EC, 2084 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 2085 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 2086 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, 2087 2088#### DEC VT100 and compatibles 2089# 2090# DEC terminals from the vt100 forward are collected here. Older DEC terminals 2091# and micro consoles can be found in the `obsolete' section. More details on 2092# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be 2093# found near the end of this file. 2094# 2095# Except where noted, these entries are DEC's official terminfos. 2096# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support 2097# Engineering for more information. Updated terminfos and termcaps 2098# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. 2099# 2100# In October 1995 DEC sold its terminals business, including the VT and Dorio 2101# line and trademark, to SunRiver Data Systems. SunRiver has since changed 2102# its name to Boundless Technologies; see http://www.boundless.com. 2103# 2104 2105# NOTE: Any VT100 emulation, whether in hardware or software, almost 2106# certainly includes what DEC called the `Level 1 editing extension' codes; 2107# only the very oldest VT100s lacked these and there probably aren't any of 2108# those left alive. To capture these, use one of the VT102 entries. 2109# 2110# Note that the <xenl> glitch in vt100 is not quite the same as on the Concept, 2111# since the cursor is left in a different position while in the 2112# weird state (concept at beginning of next line, vt100 at end 2113# of this line) so all versions of vi before 3.7 don't handle 2114# <xenl> right on vt100. The correct way to handle <xenl> is when 2115# you output the char in column 80, immediately output CR LF 2116# and then assume you are in column 1 of the next line. If <xenl> 2117# is on, am should be on too. 2118# 2119# I assume you have smooth scroll off or are at a slow enough baud 2120# rate that it doesn't matter (1200? or less). Also this assumes 2121# that you set auto-nl to "on", if you set it off use vt100-nam 2122# below. 2123# 2124# The padding requirements listed here are guesses. It is strongly 2125# recommended that xon/xoff be enabled, as this is assumed here. 2126# 2127# The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the 2128# tab settings are in non-volatile memory and don't need to be 2129# reset upon login. Also setting the number of columns glitches 2130# the screen annoyingly. You can type "reset" to get them set. 2131# 2132# The VT100 series terminals have cursor ("arrows") keys which can operate 2133# in two different modes: Cursor Mode and Application Mode. Cursor Mode 2134# is the reset state, and is assumed to be the normal state. Application 2135# Mode is the "set" state. In Cursor Mode, the cursor keys transmit 2136# "Esc [ {code}" sequences, conforming to ANSI standards. In Application 2137# Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode 2138# was provided primarily as an aid to the porting of VT52 applications. It is 2139# assumed that the cursor keys are normally in Cursor Mode, and expected that 2140# applications such as vi will always transmit the <smkx> string. Therefore, 2141# the definitions for the cursor keys are made to match what the terminal 2142# transmits after the <smkx> string is transmitted. If the <smkx> string 2143# is a null string or is not defined, then cursor keys are assumed to be in 2144# "Cursor Mode", and the cursor keys definitions should match that assumption, 2145# else the application may fail. It is also expected that applications will 2146# always transmit the <rmkx> string to the terminal before they exit. 2147# 2148# The VT100 series terminals have an auxiliary keypad, commonly referred to as 2149# the "Numeric Keypad", because it is a cluster of numeric and function keys. 2150# The Numeric Keypad which can operate in two different modes: Numeric Mode and 2151# Application Mode. Numeric Mode is the reset state, and is assumed to be 2152# the normal state. Application Mode is the "set" state. In Numeric Mode, 2153# the numeric and punctuation keys transmit ASCII 7-bit characters, and the 2154# Enter key transmits the same as the Return key (Note: the Return key 2155# can be configured to send either LF (\015) or CR LF). In Application Mode, 2156# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys 2157# always send the same "Esc O {code}" sequences. It is assumed that the keypad 2158# is normally in Numeric Mode. If an application requires that the keypad be 2159# in Application Mode then it is expected that the user, or the application, 2160# will set the TERM environment variable to point to a terminfo entry which has 2161# defined the <smkx> string to include the codes that switch the keypad into 2162# Application Mode, and the terminfo entry will also define function key 2163# fields to match the Application Mode control codes. If the <smkx> string 2164# is a null string or is not defined, then the keypad is assumed to be in 2165# Numeric Mode. If the <smkx> string switches the keypad into Application 2166# Mode, it is expected that the <rmkx> string will contain the control codes 2167# necessary to reset the keypad to "Normal" mode, and it is also expected that 2168# applications which transmit the <smkx> string will also always transmit the 2169# <rmkx> string to the terminal before they exit. 2170# 2171# Here's a diagram of the VT100 keypad keys with their bindings. 2172# The top line is the name of the key (some DEC keyboards have the keys 2173# labelled somewhat differently, like GOLD instead of PF1, but this is 2174# the most "official" name). The second line is the escape sequence it 2175# generates in Application Keypad mode (where "$" means the ESC 2176# character). The third line contains two items, first the mapping of 2177# the key in terminfo, and then in termcap. 2178# _______________________________________ 2179# | PF1 | PF2 | PF3 | PF4 | 2180# | $OP | $OQ | $OR | $OS | 2181# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| 2182# | 7 8 9 - | 2183# | $Ow | $Ox | $Oy | $Om | 2184# |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________| 2185# | 4 | 5 | 6 | , | 2186# | $Ot | $Ou | $Ov | $Ol | 2187# |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_| 2188# | 1 | 2 | 3 | | 2189# | $Oq | $Or | $Os | enter | 2190# |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM | 2191# | 0 | . | | 2192# | $Op | $On | | 2193# |___kc1_______K4____|_kc3__K5_|_kent_@8_| 2194# 2195# Note however, that the arrangement of the 5-key ka1-kc3 do not follow the 2196# terminfo guidelines. That is a compromise used to assign the remaining 2197# keys on the keypad to kf5-kf0, used on older systems with legacy termcap 2198# support: 2199vt100+keypad|dec vt100 numeric keypad no fkeys, 2200 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn, 2201vt100+pfkeys|dec vt100 numeric keypad, 2202 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 2203 use=vt100+keypad, 2204vt100+fnkeys|dec vt100 numeric keypad, 2205 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, 2206 kf9=\EOw, use=vt100+pfkeys, 2207# 2208# A better adaptation to modern keyboards such as the PC's, which have a dozen 2209# function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to 2210# use the 5-key arrangement to model the arrow keys as suggested in the 2211# terminfo guidelines: 2212# _______________________________________ 2213# | PF1 | PF2 | PF3 | PF4 | 2214# | $OP | $OQ | $OR | $OS | 2215# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| 2216# | 7 8 9 - | 2217# | $Ow | $Ox | $Oy | $Om | 2218# |_ka1__K1_|_________|_ka3__K3_|_________| 2219# | 4 | 5 | 6 | , | 2220# | $Ot | $Ou | $Ov | $Ol | 2221# |_________|_kb2__K2_|_________|_________| 2222# | 1 | 2 | 3 | | 2223# | $Oq | $Or | $Os | enter | 2224# |_kc1__K4_|_________|_kc3__K5_| $OM | 2225# | 0 | . | | 2226# | $Op | $On | | 2227# |___________________|_________|_kent_@8_| 2228# 2229vt220+keypad|dec vt220 numeric keypad, 2230 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM, 2231 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt, 2232 kb3=\EOv, kc2=\EOr, 2233# 2234vt100+enq|ncurses extension for vt100-style ENQ, 2235 u8=\E[?1;2c, use=ansi+enq, 2236vt102+enq|ncurses extension for vt102-style ENQ, 2237 u8=\E[?6c, use=ansi+enq, 2238# 2239# And here, for those of you with orphaned VT100s lacking documentation, is 2240# a description of the soft switches invoked when you do `Set Up'. 2241# 2242# Scroll 0-Jump Shifted 3 0-# 2243# | 1-Smooth | 1-British pound sign 2244# | Autorepeat 0-Off | Wrap Around 0-Off 2245# | | 1-On | | 1-On 2246# | | Screen 0-Dark Bkg | | New Line 0-Off 2247# | | | 1-Light Bkg | | | 1-On 2248# | | | Cursor 0-Underline | | | Interlace 0-Off 2249# | | | | 1-Block | | | | 1-On 2250# | | | | | | | | 2251# 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings 2252# | | | | | | | | 2253# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz 2254# | | | 1-On | | | 1-50 Hz 2255# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits 2256# | | 1-ANSI | | 1-8 Bits 2257# | Keyclick 0-Off | Parity 0-Off 2258# | 1-On | 1-On 2259# Margin Bell 0-Off Parity Sense 0-Odd 2260# 1-On 1-Even 2261# 2262# The following SET-UP modes are assumed for normal operation: 2263# ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS 2264# WRAP_AROUND_ON JUMP_SCROLL_OFF 2265# Other SET-UP modes may be set for operator convenience or communication 2266# requirements; I recommend 2267# AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_# 2268# Unless you have a graphics add-on such as Digital Engineering's VT640 2269# (and even then, whenever it can be arranged!) you should set 2270# INTERLACE_OFF 2271# 2272# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr) 2273vt100|vt100-am|dec vt100 (w/advanced video), 2274 OTbs, am, mc5i, msgr, xenl, xon, 2275 cols#80, it#8, lines#24, vt#3, 2276 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2277 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2278 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2279 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 2280 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 2281 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 2282 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 2283 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, 2284 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, 2285 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 2286 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 2287 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, 2288 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2289 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 2290 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 2291 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 2292 use=vt100+fnkeys, 2293vt100nam|vt100-nam|vt100 no automargins, 2294 am@, xenl@, use=vt100-am, 2295vt100-vb|dec vt100 (w/advanced video) & no beep, 2296 bel@, flash=\E[?5h\E[?5l, use=vt100, 2297 2298# Ordinary vt100 in 132 column ("wide") mode. 2299vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video), 2300 cols#132, lines#24, 2301 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am, 2302vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin), 2303 cols#132, lines#14, vt@, 2304 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam, 2305 2306# vt100 with no advanced video. 2307vt100-nav|vt100 without advanced video option, 2308 xmc#1, 2309 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m, 2310 smul@, use=vt100, 2311vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option), 2312 cols#132, lines#14, use=vt100-nav, 2313 2314# vt100 with one of the 24 lines used as a status line. 2315# We put the status line on the top. 2316vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline, 2317 eslok, hs, 2318 lines#23, 2319 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr, 2320 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8, 2321 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8, 2322 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am, 2323 2324# Status line at bottom. 2325# Clearing the screen will clobber status line. 2326vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline, 2327 eslok, hs, 2328 lines#23, 2329 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H, 2330 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am, 2331 2332# Most of the `vt100' emulators out there actually emulate a vt102 2333# This entry (or vt102-nsgr) is probably the right thing to use for 2334# these. 2335vt102|dec vt102, 2336 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h, 2337 use=vt100, 2338vt102-w|dec vt102 in wide mode, 2339 cols#132, 2340 rs3=\E[?3h, use=vt102, 2341 2342# Many brain-dead PC comm programs that pretend to be `vt100-compatible' 2343# fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0> 2344# string in the canonical vt100 entry above leaves the screen littered 2345# with little snowflake or star characters (IBM PC ROM character \017 = ^O) 2346# after highlight turnoffs. This entry should fix that, and even leave 2347# ACS support working, at the cost of making multiple-highlight changes 2348# slightly more expensive. 2349# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995 2350vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes), 2351 sgr@, sgr0=\E[m, use=vt102, 2352 2353# VT125 Graphics CRT. Clear screen also erases graphics 2354# Some vt125's came configured with vt102 support. 2355vt125|vt125 graphics terminal, 2356 mir, 2357 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100, 2358 2359# This isn't a DEC entry, it came from University of Wisconsin. 2360# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr) 2361vt131|dec vt131, 2362 OTbs, am, xenl, 2363 cols#80, it#8, lines#24, vt#3, 2364 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 2365 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2366 cub1=^H, cud1=^J, cuf1=\E[C$<2/>, 2367 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 2368 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, 2369 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, 2370 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 2371 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>, 2372 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>, 2373 rmul=\E[m$<2/>, 2374 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2375 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=, 2376 smso=\E[7m$<2/>, smul=\E[4m$<2/>, 2377 2378# vt132 - like vt100 but slower and has ins/del line and such. 2379# I'm told that <smir>/<rmir> are backwards in the terminal from the 2380# manual and from the ANSI standard, this describes the actual 2381# terminal. I've never actually used a vt132 myself, so this 2382# is untested. 2383# 2384vt132|DEC vt132, 2385 xenl, 2386 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, 2387 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100, 2388 2389# This vt220 description maps F5--F9 to the second block of function keys 2390# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict 2391# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping. 2392# PF1--PF4 are used as F1--F4. 2393# 2394vt220-old|vt200-old|DEC VT220 in vt100 emulation mode, 2395 OTbs, OTpt, am, mir, xenl, xon, 2396 cols#80, lines#24, vt#3, 2397 OTnl=^J, 2398 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2399 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l, 2400 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M, 2401 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 2402 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 2403 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 2404 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>, 2405 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B, 2406 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, 2407 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, 2408 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, 2409 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8, 2410 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100, 2411 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, 2412 rmso=\E[27m, rmul=\E[24m, 2413 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2414 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2415 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2416 smso=\E[7m, smul=\E[4m, 2417 2418# A much better description of the VT200/220; used to be vt220-8 2419# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1 2420# designation to accommodate bug in pcvt -TD 2421vt220|vt200|dec vt220, 2422 OTbs, am, mc5i, mir, msgr, xenl, xon, 2423 cols#80, it#8, lines#24, vt#3, 2424 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2425 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 2426 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2427 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2428 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2429 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 2430 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 2431 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH, 2432 ich=\E[%p1%d@, if=/usr/share/tabset/vt100, 2433 il=\E[%p1%dL, il1=\E[L, ind=\ED, 2434 is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D, 2435 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~, 2436 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 2437 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, 2438 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, 2439 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, 2440 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, 2441 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i, 2442 mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 2443 rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, 2444 rmul=\E[24m, rs1=\E[?3l, sc=\E7, 2445 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2446 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2447 smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2448vt220-w|vt200-w|DEC vt220 in wide mode, 2449 cols#132, 2450 rs3=\E[?3h, use=vt220, 2451vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode, 2452 OTbs, am, mc5i, mir, msgr, xenl, xon, 2453 cols#80, it#8, lines#24, vt#3, 2454 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2455 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M, 2456 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, 2457 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, 2458 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, 2459 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 2460 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0, 2461 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH, 2462 ich=\233%p1%d@, if=/usr/share/tabset/vt100, 2463 il=\233%p1%dL, il1=\233L, ind=\ED, 2464 is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H, 2465 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 2466 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, 2467 kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~, 2468 kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS, 2469 kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~, 2470 kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~, 2471 knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1, 2472 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, 2473 nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B, 2474 rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m, 2475 rs1=\233?3l, sc=\E7, 2476 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2477 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h, 2478 smso=\2337m, smul=\2334m, tbc=\2333g, 2479 2480# vt220d: 2481# This vt220 description regards F6--F10 as the second block of function keys 2482# at the top of the keyboard. This mapping follows the description given 2483# in the VT220 Programmer Reference Manual and agrees with the labeling 2484# on some terminals that emulate the vt220. There is no support for an F5. 2485# See vt220 for an alternate mapping. 2486# 2487vt220d|DEC VT220 in vt100 mode with DEC function key labeling, 2488 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 2489 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 2490 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~, 2491 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old, 2492 2493vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins, 2494 am@, 2495 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, 2496 2497# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko 2498# (not an official DEC entry!) 2499# The problem with real vt220 terminals is they don't send escapes when in 2500# in vt220 mode. This can be gotten around two ways. 1> don't send 2501# escapes or 2> put the vt220 into vt100 mode and use all the nifty 2502# features of vt100 advanced video which it then has. 2503# 2504# This entry takes the view of putting a vt220 into vt100 mode so 2505# you can use the escape key in emacs and everything else which needs it. 2506# 2507# You probably don't want to use this on a VMS machine since VMS will think 2508# it has a vt220 and will get fouled up coming out of emacs 2509# 2510# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996 2511# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr) 2512vt200-js|vt220-js|dec vt200 series with jump scroll, 2513 am, 2514 cols#80, 2515 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2516 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 2517 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 2518 ht=^I, il1=\E[L, ind=\ED, 2519 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m, 2520 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2521 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8, 2522 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l, 2523 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m, 2524 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=, 2525 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m, 2526 2527# This was DEC's vt320. Use the purpose-built one below instead 2528#vt320|DEC VT320 in vt100 emulation mode, 2529# use=vt220, 2530 2531# Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam. 2532# 2533vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode, 2534 am@, 2535 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, 2536 2537# These entries are not DEC's official ones, they were purpose-built for the 2538# VT320. Here are the designer's notes: 2539# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to 2540# 'Erase to End of Field'... since nothing seems to use 'end' anyways... 2541# khome is Home on a PC kbd. Actually 'FIND' on a VT. 2542# Things that use <knxt> usually use tab anyways... and things that don't use 2543# tab usually use <knxt> instead... 2544# kprv is same as tab - Backtab is useless... 2545# I left out <sgr> because of its RIDICULOUS complexity, 2546# and the resulting fact that it causes the termcap translation of the entry 2547# to SMASH the 1k-barrier... 2548# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 2549# (vt320: uncommented <fsl> --esr) 2550vt320|vt300|dec vt320 7 bit terminal, 2551 am, eslok, hs, mir, msgr, xenl, 2552 cols#80, lines#24, wsl#80, 2553 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2554 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 2555 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 2556 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2557 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2558 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2559 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 2560 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$}, 2561 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 2562 il1=\E[L, ind=\ED, 2563 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2564 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2565 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~, 2566 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 2567 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 2568 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 2569 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I, 2570 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i, 2571 mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m, 2572 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 2573 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 2574 rmul=\E[m, 2575 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2576 sc=\E7, 2577 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2578 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 2579 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2580 tsl=\E[1$}\E[H\E[K, use=vt220+keypad, 2581vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy, 2582 am@, 2583 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2584 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2585 use=vt320, 2586# We have to init 132-col mode, not 80-col mode. 2587vt320-w|vt300-w|dec vt320 wide 7 bit terminal, 2588 cols#132, wsl#132, 2589 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2590 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2591 use=vt320, 2592vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am, 2593 am@, 2594 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2595 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2596 use=vt320-w, 2597 2598# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals 2599# which are pretty much a superset of the VT320. They have the 2600# host writable status line, yet another different DRCS matrix size, 2601# and such, but they add the DEC Technical character set, Multiple text 2602# pages, selectable length pages, and the like. The difference between 2603# the vt330 and vt340 is that the latter has only 2 planes and a monochrome 2604# monitor, the former has 4 planes and a color monitor. These terminals 2605# support VT131 and ANSI block mode, but as with much of these things, 2606# termcap/terminfo doesn't deal with these features. 2607# 2608# Note that this entry is are set up in what was the standard way for GNU 2609# Emacs v18 terminal modes to deal with the cursor keys in that the arrow 2610# keys were switched into application mode at the same time the numeric pad 2611# is switched into application mode. This changes the definitions of the 2612# arrow keys. Emacs v19 is smarter and mines its keys directly out of 2613# your termcap or terminfo entry, 2614# 2615# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 2616# (vt340: string capability "sb=\E[M" corrected to "sr"; 2617# also, added <rmam>/<smam> based on the init string -- esr) 2618vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page, 2619 am, eslok, hs, mir, msgr, xenl, xon, 2620 cols#80, it#8, lines#24, vt#3, 2621 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2622 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, 2623 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2624 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 2625 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 2626 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 2627 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, 2628 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, 2629 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 2630 il1=\E[L, ind=\ED, 2631 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2632 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2633 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 2634 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 2635 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 2636 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 2637 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 2638 rmul=\E[24m, rs1=\E[?3l, sc=\E7, 2639 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2640 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 2641 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2642 tsl=\E[2$~\E[1$}\E[1;%dH, 2643 2644# DEC doesn't supply a vt400 description, so we add Daniel Glasser's 2645# (originally written with vt420 as its primary name, and usable for it). 2646# 2647# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple 2648# text pages and long text pages with selectable length of the vt340, along 2649# with left and right margins, rectangular area text copy, fill, and erase 2650# operations, selected region character attribute change operations, 2651# page memory and rectangle checksums, insert/delete column, reception 2652# macros, and other features too numerous to remember right now. TERMCAP 2653# can only take advantage of a few of these added features. 2654# 2655# Note that this entry is are set up in what was the standard way for GNU 2656# Emacs v18 terminal modes to deal with the cursor keys in that the arrow 2657# keys were switched into application mode at the same time the numeric pad 2658# is switched into application mode. This changes the definitions of the 2659# arrow keys. Emacs v19 is smarter and mines its keys directly out of 2660# your termcap entry, 2661# 2662# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 2663# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:"; 2664# also, added <rmam>/<smam> based on the init string -- esr) 2665vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap, 2666 am, eslok, hs, mir, msgr, xenl, xon, 2667 cols#80, it#8, lines#24, vt#3, 2668 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2669 blink=\E[5m, bold=\E[1m, civis=\E[?25l, 2670 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M, 2671 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2672 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2673 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2674 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 2675 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>, 2676 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, 2677 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 2678 il=\E[%p1%dL, il1=\E[L, ind=\ED, 2679 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2680 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2681 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 2682 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 2683 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 2684 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 2685 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 2686 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7, 2687 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2688 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 2689 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2690 tsl=\E[2$~\E[1$}\E[1;%dH, 2691 2692# (vt420: I removed <kf0>, it collided with <kf10>. I also restored 2693# a missing <sc> -- esr) 2694vt420|DEC VT420, 2695 am, mir, xenl, xon, 2696 cols#80, lines#24, vt#3, 2697 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2698 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2699 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2700 cub1=^H, cud1=\E[B, cuf1=\E[C, 2701 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 2702 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 2703 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, 2704 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, 2705 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 2706 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, 2707 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, 2708 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 2709 kslt=\E[4~, rc=\E8, rev=\E[7m$<2>, 2710 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>, 2711 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, 2712 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 2713 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, 2714 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2715 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2716 smkx=\E=, smso=\E[7m, smul=\E[4m, 2717 2718# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx) 2719# takes two parameters, the key and the string. Translating the key is 2720# straightforward (keys 1-5 are not defined on real terminals, though some 2721# emulators define these): 2722# 2723# if (key < 16) then value = key; 2724# else if (key < 21) then value = key + 1; 2725# else if (key < 25) then value = key + 2; 2726# else if (key < 27) then value = key + 3; 2727# else if (key < 30) then value = key + 4; 2728# else value = key + 5; 2729# 2730# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT". 2731# There's no provision in terminfo for emitting a string in this format, so the 2732# application has to know it. 2733# 2734vt420pc|DEC VT420 w/PC keyboard, 2735 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, 2736 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, 2737 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~, 2738 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, 2739 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, 2740 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~, 2741 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~, 2742 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~, 2743 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~, 2744 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~, 2745 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~, 2746 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~, 2747 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 2748 kf8=\E[19~, kf9=\E[20~, khome=\E[H, 2749 pctrm=USR_TERM\:vt420pcdos\:, 2750 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, 2751 use=vt420, 2752 2753vt420pcdos|DEC VT420 w/PC for DOS Merge, 2754 lines#25, 2755 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;, 2756 pctrm@, 2757 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@, 2758 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc, 2759 2760vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys, 2761 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 2762 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 2763 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 2764 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 2765 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 2766 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS, 2767 use=vt420, 2768 2769vt510|DEC VT510, 2770 use=vt420, 2771vt510pc|DEC VT510 w/PC keyboard, 2772 use=vt420pc, 2773vt510pcdos|DEC VT510 w/PC for DOS Merge, 2774 use=vt420pcdos, 2775 2776# VT520/VT525 2777# 2778# The VT520 is a monochrome text terminal capable of managing up to 2779# four independent sessions in the terminal. It has multiple ANSI 2780# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console) 2781# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950, 2782# 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only. 2783# 2784# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or 2785# [Alt]/[Print Screen] depending upon which keyboard and which 2786# terminal mode is being used. If Set-Up has been disabled or 2787# assigned to an unknown key, Set-Up may be entered by pressing 2788# [F3] as the first key after power up, regardless of keyboard type. 2789# (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr) 2790vt520|DEC VT520, 2791 am, mir, xenl, xon, 2792 cols#80, lines#24, vt#3, 2793 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2794 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2795 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2796 cub1=^H, cud1=\E[B, cuf1=\E[C, 2797 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 2798 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 2799 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, 2800 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, 2801 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 2802 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, 2803 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, 2804 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 2805 kslt=\E[4~, 2806 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, 2807 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, 2808 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, 2809 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 2810 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, 2811 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2812 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2813 smso=\E[7m, smul=\E[4m, 2814 2815# (vt525: I added <rmam>/<smam> based on the init string; 2816# removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr) 2817vt525|DEC VT525, 2818 am, mir, xenl, xon, 2819 cols#80, lines#24, vt#3, 2820 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2821 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2822 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2823 cub1=^H, cud1=\E[B, cuf1=\E[C, 2824 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 2825 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 2826 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, 2827 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, 2828 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 2829 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, 2830 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, 2831 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 2832 kslt=\E[4~, 2833 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, 2834 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, 2835 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, 2836 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 2837 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, 2838 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2839 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2840 smso=\E[7m, smul=\E[4m, 2841 2842#### VT100 emulations 2843# 2844 2845# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows 2846# (the best Windows telnet as of September 1995) presents the name `dec-vt100' 2847# to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us 2848# that this works best with a stock vt100 entry. 2849dec-vt100|EWAN telnet's vt100 emulation, 2850 use=vt100, 2851 2852# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996 2853dec-vt220|DOS tnvt200 terminal emulator, 2854 am@, use=vt220, 2855 2856# Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to 2857# anyone who needs PC VT340 emulation. (or anything below that level, for 2858# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's 2859# RDBM systems, it includes ReGIS and SiXel support! I'm impressed... 2860# I can send the address if requested. 2861# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr) 2862# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 2863z340|zstem vt340 terminal emulator 132col 42line, 2864 lines#42, 2865 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, 2866 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, 2867 use=vt320-w, 2868z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins), 2869 am@, 2870 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, 2871 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, 2872 use=z340, 2873 2874# CRT is shareware. It implements some xterm features, including mouse. 2875crt|crt-vt220|CRT 2.3 emulating VT220, 2876 bce, msgr, 2877 ncv@, 2878 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color, 2879 2880# PuTTY 0.55 (released 3 August 2004) 2881# http://www.chiark.greenend.org.uk/~sgtatham/putty/ 2882# 2883# Comparing with 0.51, vttest is much better (only a few problems with the 2884# cursor position reports and wrapping). 2885# 2886# PuTTY 0.51 (released 14 December 2000) 2887# 2888# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as 2889# well as SCO and Atari, color palettes from Linux console). Reading the code, 2890# it is intended to be VT102 plus selected features. By default, it sets $TERM 2891# to xterm, which is incorrect, since several features are misimplemented: 2892# 2893# Alt+key always sends ESC+key, so 'km' capability is removed. 2894# 2895# Control responses, wrapping and tabs are buggy, failing a couple of 2896# screens in vttest. 2897# 2898# xterm mouse support is not implemented (unrelease version may). 2899# 2900# Several features such as backspace/delete are optional; this entry documents 2901# the default behavior -TD 2902 2903putty|PuTTY terminal emulator, 2904 am, bce, bw, ccc, hs, mir, msgr, xenl, xon, XT, 2905 colors#8, it#8, ncv#22, pairs#64, U8#1, 2906 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2907 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 2908 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 2909 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2910 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, 2911 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 2912 dch=\E[%p1%dP, dch1=\E[P, 2913 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;, 2914 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX, 2915 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 2916 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG, 2917 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, 2918 indn=\E[%p1%dS, 2919 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x, 2920 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R, 2921 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 2922 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, 2923 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 2924 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 2925 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, 2926 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, 2927 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 2928 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 2929 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m, 2930 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, 2931 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m, 2932 rmso=\E[27m, rmul=\E[24m, 2933 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l, 2934 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7, 2935 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 2936 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 2937 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h, 2938 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, 2939 tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq, 2940vt100-putty|Reset PuTTY to pure vt100, 2941 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p, 2942 use=vt100, 2943# palette is hardcoded... 2944putty-256color|PuTTY 0.58 with xterm 256-colors, 2945 initc@, use=xterm+256color, use=putty, 2946 2947# One of the keyboard selections is "VT100+". 2948# pterm (the X11 port) uses shifted F1-F10 as F11-F20 2949putty-vt100|VT100+ keyboard layout, 2950 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ, 2951 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 2952 kf9=\EOX, use=putty, 2953 2954# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by 2955# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator 2956# (communication program) which supports: 2957# 2958# - Serial port connections. 2959# - TCP/IP (telnet) connections. 2960# - VT100 emulation, and selected VT200/300 emulation. 2961# - TEK4010 emulation. 2962# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and 2963# Quick-VAN). 2964# - Scripts using the "Tera Term Language". 2965# - Japanese and Russian character sets. 2966# 2967# The program does not come with terminfo or termcap entries. However, the 2968# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no 2969# vt52 or doublesize character support; blinking is done with color). Besides 2970# the HPA, VPA extensions it also implements CPL and CNL. 2971# 2972# All of the function keys can be remapped. This description shows the default 2973# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys 2974# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad 2975# is laid out like vt220, rather than the face codes on the PC keyboard, i.e, 2976# kfnd Insert 2977# kslt Delete 2978# kich1 Home 2979# kdch1 PageUp 2980# kpp End 2981# knp PageDown 2982# 2983# ANSI colors are implemented, but cannot be combined with video attributes 2984# except for reverse. 2985# 2986# No fonts are supplied with the program, so the acsc string is chosen to 2987# correspond with the default Microsoft terminal font. 2988# 2989# Tera Term recognizes some xterm sequences, including those for setting and 2990# retrieving the window title, and for setting the window size (i.e., using 2991# "resize -s"), though it does not pass SIGWINCH to the application if the 2992# user resizes the window with the mouse. 2993teraterm2.3|Tera Term Pro, 2994 km, xon@, 2995 ncv#43, vt@, 2996 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 2997 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, 2998 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 2999 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 3000 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 3001 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG, 3002 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~, 3003 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 3004 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 3005 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 3006 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 3007 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, 3008 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM, 3009 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m, 3010 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq, 3011 use=klone+color, use=vt100, 3012 3013# Version 4.59 has regular vt100 line-drawing (so it is no longer necessary 3014# to choose a Windows OEM font). 3015# 3016# Testing with tack: 3017# - it does not have xenl (suppress that) 3018# - underline seems to work with color (modify ncv). 3019# Testing with vttest: 3020# - wrapping differs from vt100 (menu 1). 3021# - it recognizes xterm's X10 and normal mouse tracking, but none of the 3022# other flavors. 3023# - it recognizes the dtterm window controls for reporting size in 3024# characters and pixels. 3025# - it passes SIGWINCH. 3026teraterm4.59|Tera Term Pro, 3027 bce, xenl@, 3028 ncv#41, 3029 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3030 kmous=\E[M, use=teraterm2.3, 3031 3032teraterm|Tera Term, 3033 use=teraterm4.59, 3034 3035# Tested with WinNT 4.0, the telnet application assumes the screensize is 3036# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters. 3037# 3038# Other notes: 3039# a) Fails tack's cup (cursor-addressing) test, though cup works well enough 3040# for casual (occasional) use. Also fails several of the vttest screens, 3041# but that is not unusual for vt100 "emulators". 3042# b) Does not implement vt100 keypad 3043# c) Recognizes a subset of vt52 controls. 3044ms-vt100|MS telnet imitating dec vt100, 3045 lines#25, 3046 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 3047 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@, 3048 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100, 3049 3050# Tested with Windows 2000, the telnet application runs in a console window, 3051# also using 'Terminal' font. 3052# 3053# Other notes: 3054# a) This version has no function keys or numeric keypad. Unlike the older 3055# version, the numeric keypad is entirely ignored. 3056# b) The program sets $TERM to "ansi", which of course is inaccurate. 3057ms-vt100-color|vtnt|windows 2000 ansi (sic), 3058 bce, 3059 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color, 3060 use=ms-vt100, 3061 3062# Based on comments from Federico Bianchi: 3063# 3064# vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different 3065# scheme for PF keys. 3066# 3067# and PuTTY wishlist: 3068# 3069# The modifiers are represented as the codes listed above, prefixed to 3070# the normal sequences. If the modifier is pressed alone, its sequence 3071# is transmitted twice in succession. If multiple modifiers apply, 3072# they're transmitted in the order shift, control, alt. 3073# 3074# Shift \E^S 3075# Alt \E^A, 3076# Ctrl \E^C, 3077ms-vt100+|vt100+|windows XP vt100+ (sic), 3078 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@, 3079 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3, 3080 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6, 3081 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9, 3082 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@, 3083 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3, 3084 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6, 3085 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9, 3086 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@, 3087 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4, 3088 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6, 3089 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9, 3090 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5, 3091 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+, 3092 knp=\E/, kpp=\E?, use=ms-vt100-color, 3093 3094ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+, 3095 use=ms-vt100+, 3096 3097# expect-5.44.1.15/example/tkterm 3098# a minimal subset of a vt100 (compare with "news-unk). 3099# 3100# The missing "=" in smkx is not a typo (here), but an error in tkterm. 3101tt|tkterm|Don Libes' tk text widget terminal emulator, 3102 clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 3103 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, 3104 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 3105 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E, 3106 smso=\E[7m, 3107 3108######## X TERMINAL EMULATORS 3109#### XTERM 3110# 3111# You can add the following line to your .Xdefaults to change the terminal type 3112# set by the xterms you start up to my-xterm: 3113# 3114# *termName: my-xterm 3115# 3116# System administrators can change the default entry for xterm instances 3117# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either 3118# case, xterm will detect and reject an invalid terminal type, falling back 3119# to the default of xterm. 3120# 3121 3122# X10/6.6 11/7/86, minus alternate screen, plus (csr) 3123# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string; 3124# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E) 3125# as these seem not to work -- esr) 3126x10term|vs100-x10|xterm terminal emulator (X10 window system), 3127 OTbs, am, km, mir, msgr, xenl, xon, 3128 cols#80, it#8, lines#65, 3129 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, 3130 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 3131 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 3132 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, 3133 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H, 3134 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 3135 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l, 3136 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 3137 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, 3138 smso=\E[7m, smul=\E[4m, 3139# Compatible with the R5 xterm 3140# (from the XFree86 3.2 distribution, <blink=@> removed) 3141# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD 3142# corrected typos in rs2 string - TD 3143# added u6-u9 -TD 3144xterm-r5|xterm R5 version, 3145 OTbs, am, km, msgr, xenl, 3146 cols#80, it#8, lines#24, 3147 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 3148 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3149 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3150 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3151 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 3152 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 3153 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, 3154 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, 3155 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, 3156 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, 3157 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 3158 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 3159 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, 3160 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 3161 rmul=\E[m, 3162 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H, 3163 sc=\E7, 3164 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 3165 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, 3166 smul=\E[4m, tbc=\E[3g, use=vt100+enq, 3167# Compatible with the R6 xterm 3168# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed) 3169# added khome/kend, hts based on the R6 xterm code - TD 3170# (khome/kend do not actually work in X11R5 or X11R6, but many people use this 3171# for compatibility with other emulators). 3172xterm-r6|xterm-old|xterm X11R6 version, 3173 OTbs, am, km, mir, msgr, xenl, 3174 cols#80, it#8, lines#24, 3175 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3176 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 3177 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3178 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3179 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3180 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 3181 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, 3182 il1=\E[L, ind=^J, 3183 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H, 3184 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 3185 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 3186 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 3187 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 3188 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 3189 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3190 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 3191 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, 3192 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 3193 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 3194 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7, 3195 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, 3196 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 3197 use=vt100+enq, 3198# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up. 3199# The name has been changed and some aliases have been removed. 3200xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System), 3201 OTbs, am, bce, km, mir, msgr, xenl, 3202 cols#80, it#8, lines#24, ncv@, 3203 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3204 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 3205 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 3206 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3207 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3208 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3209 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 3210 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 3211 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 3212 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 3213 il1=\E[L, ind=^J, 3214 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, 3215 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 3216 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~, 3217 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 3218 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 3219 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, 3220 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 3221 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~, 3222 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El, 3223 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, 3224 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, 3225 rmso=\E[27m, rmul=\E[24m, rs1=^O, 3226 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7, 3227 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3228 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3229 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3230 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, 3231 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 3232 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq, 3233 use=ecma+color, use=vt220+keypad, 3234 3235# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100 3236# codes for F1-F4 except while in VT220 mode. 3237xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System), 3238 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32, 3239 3240# This version was released in XFree86 3.3.3 (November 1998). 3241# Besides providing printer support, it exploits a new feature that allows 3242# xterm to use terminfo-based descriptions with the titeInhibit resource. 3243# -- the distribution contained incorrect khome/kend values -TD 3244xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System), 3245 mc5i, 3246 blink=\E[5m, ich1@, invis=\E[8m, 3247 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@, 3248 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l, 3249 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, 3250 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 3251 smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33, 3252 3253# This version was released in XFree86 4.0. 3254xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System), 3255 npc, 3256 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~, 3257 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@, 3258 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF, 3259 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, 3260 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, 3261 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 3262 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, 3263 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~, 3264 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, 3265 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P, 3266 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~, 3267 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, 3268 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, 3269 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l, 3270 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3271 smcup=\E[?1049h, use=xterm-xf86-v333, 3272 3273# This version was released in XFree86 4.3. 3274xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System), 3275 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, 3276 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, 3277 kbeg@, 3278 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 3279 use=xterm-xf86-v40, 3280 3281# This version was released in XFree86 4.4. 3282xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System), 3283 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS, 3284 rin=\E[%p1%dT, use=xterm-xf86-v43, 3285 3286xterm-xfree86|xterm terminal emulator (XFree86), 3287 use=xterm-xf86-v44, 3288 3289# This version reflects the current xterm features. 3290xterm-new|modern xterm terminal emulator, 3291 npc, 3292 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM, 3293 rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux, 3294 use=xterm-basic, 3295# 3296# This fragment describes as much of XFree86 xterm's "pc-style" function 3297# keys as will fit into terminfo's 60 function keys. 3298# From ctlseqs.ms: 3299# Code Modifiers 3300# --------------------------------- 3301# 2 Shift 3302# 3 Alt 3303# 4 Shift + Alt 3304# 5 Control 3305# 6 Shift + Control 3306# 7 Alt + Control 3307# 8 Shift + Alt + Control 3308# --------------------------------- 3309# The meta key may also be used as a modifier in this scheme, adding another 3310# bit to the parameter. 3311xterm+pcfkeys|fragment for PC-style fkeys, 3312 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2, 3313 use=xterm+pce2, 3314# 3315xterm+noapp|fragment with cursor keys in normal mode, 3316 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, 3317 khome=\E[H, 3318 3319xterm+app|fragment with cursor keys in application mode, 3320 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF, 3321 khome=\EOH, 3322# 3323# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27) 3324# and revised in patch #167 (2002/8/24). Some other terminal emulators copied 3325# the earlier scheme, as noted in the "use=" clauses in this file. 3326# 3327# The original assignments from patch #94 for cursor-keys had some technical 3328# issues: 3329# 3330# A parameter for a function-key to represent a modifier is just more 3331# bits. But for a cursor-key it may change the behavior of the 3332# application. For instance, emacs decodes the first parameter of a 3333# cursor-key as a repeat count. 3334# 3335# A parameterized string should (really) not begin with SS3 (\EO). 3336# Rather, CSI (\E[) should be used. 3337# 3338# For these reasons, the original assignments were deprecated. For 3339# compatibility reasons, they are still available as a setting of xterm's 3340# modifyCursorKeys resource. These fragments list the modified cursor-keys 3341# that might apply to xterm+pcfkeys with different values of that resource. 3342xterm+pcc3|fragment with modifyCursorKeys:3, 3343 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B, 3344 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B, 3345 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B, 3346 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D, 3347 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C, 3348 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C, 3349 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A, 3350 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A, 3351 kUP7=\E[>1;7A, 3352 3353xterm+pcc2|fragment with modifyCursorKeys:2, 3354 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A, 3355 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, 3356 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D, 3357 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D, 3358 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C, 3359 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A, 3360 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A, 3361 3362xterm+pcc1|fragment with modifyCursorKeys:1, 3363 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B, 3364 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B, 3365 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D, 3366 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C, 3367 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A, 3368 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A, 3369 3370xterm+pcc0|fragment with modifyCursorKeys:0, 3371 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B, 3372 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B, 3373 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D, 3374 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C, 3375 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A, 3376 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A, 3377 3378# 3379# Here are corresponding fragments from xterm patch #216: 3380# 3381xterm+pcf0|fragment with modifyFunctionKeys:0, 3382 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 3383 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, 3384 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, 3385 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 3386 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, 3387 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR, 3388 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, 3389 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, 3390 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R, 3391 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, 3392 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, 3393 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P, 3394 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S, 3395 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~, 3396 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~, 3397 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P, 3398 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3399# 3400xterm+pcf2|fragment with modifyFunctionKeys:2, 3401 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 3402 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, 3403 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, 3404 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 3405 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, 3406 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, 3407 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, 3408 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, 3409 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R, 3410 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~, 3411 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, 3412 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, 3413 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R, 3414 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~, 3415 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~, 3416 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, 3417 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~, 3418 kf8=\E[19~, kf9=\E[20~, 3419# 3420# Chunks from xterm #230: 3421xterm+pce2|fragment with modifyCursorKeys:2, 3422 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, 3423 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~, 3424 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~, 3425 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F, 3426 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F, 3427 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H, 3428 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~, 3429 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~, 3430 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~, 3431 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~, 3432 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~, 3433 use=xterm+edit, 3434 3435xterm+edit|fragment for 6-key editing-keypad, 3436 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 3437 use=xterm+pc+edit, 3438 3439xterm+pc+edit|fragment for pc-style editing keypad, 3440 kend=\E[4~, khome=\E[1~, 3441 3442xterm+vt+edit|fragment for vt220-style editing keypad, 3443 kfnd=\E[1~, kslt=\E[4~, 3444 3445# 3446# Those chunks use the new-style (the xterm oldFunctionKeys resource is false). 3447# Alternatively, the same scheme with old-style function keys as in xterm-r6 3448# is shown here (because that is used in mrxvt and mlterm): 3449xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2, 3450 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~, 3451 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~, 3452 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~, 3453 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~, 3454 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~, 3455 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~, 3456 kf63=\E[13;4~, use=xterm+pcf2, 3457# 3458# This chunk is used for building the VT220/Sun/PC keyboard variants. 3459xterm-basic|modern xterm terminal emulator - common, 3460 OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX, 3461 colors#8, cols#80, it#8, lines#24, pairs#64, 3462 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3463 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 3464 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M, 3465 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3466 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3467 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3468 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 3469 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 3470 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 3471 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 3472 ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H, 3473 kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El, 3474 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, 3475 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l, 3476 rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, 3477 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, 3478 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 3479 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3480 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3481 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 3482 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h, 3483 smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m, 3484 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq, 3485 3486# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997 3487# In retrospect, something like xterm-r6 was intended here -TD 3488xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1, 3489 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33, 3490 3491# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey) 3492# If configured to support 88- or 256-colors (which is fairly common in 2009), 3493# xterm also recognizes the control sequences for initc -TD 3494xterm-16color|xterm with 16 colors like aixterm, 3495 ccc, 3496 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, 3497 use=ibm+16color, use=xterm-new, 3498 3499# 256-colors is a compile-time feature of XFree86 xterm beginning with 3500# patch #111 (1999/7/10) -TD 3501xterm+256color|xterm 256-color feature, 3502 ccc, 3503 colors#256, pairs#32767, 3504 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, 3505 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m, 3506 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m, 3507 setb@, setf@, 3508 3509# 88-colors is a compile-time feature of XFree86 xterm beginning with 3510# patch #115 (1999/9/18) -TD 3511# 3512# Note that the escape sequences used are the same as for 256-colors - xterm 3513# has a different table of default color resource values. If built for 3514# 256-colors, it can still handle an 88-color palette by using the initc 3515# capability. 3516# 3517# At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals 3518# which support the xterm+256color feature support the associated initc 3519# capability. So it is cancelled in the entries which use this and/or the 3520# xterm+256color block. 3521# 3522# The default color palette for the 256- and 88-colors are different. A 3523# given executable will have one palette (perhaps compiled-in). If the program 3524# supports xterm's control sequence, it can be programmed using initc. 3525xterm+88color|xterm 88-color feature, 3526 colors#88, pairs#7744, use=xterm+256color, 3527 3528# These variants of XFree86 3.9.16 xterm are built as a configure option. 3529xterm-256color|xterm with 256 colors, 3530 use=xterm+256color, use=xterm-new, 3531xterm-88color|xterm with 88 colors, 3532 use=xterm+88color, use=xterm-256color, 3533 3534# These two are used to demonstrate the any-event mouse support, i.e., by 3535# using an extended name "XM" which tells ncurses to put the terminal into 3536# a special mode when initializing the xterm mouse. 3537xterm-1002|testing xterm-mouse, 3538 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new, 3539xterm-1003|testing xterm-mouse, 3540 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new, 3541 3542# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who 3543# asked for some of xterm's advanced features to be added to its terminfo 3544# entry. It defines extended capabilities not found in standard terminfo or 3545# termcap. These are useful in tmux, for instance, hence the name. 3546# 3547# One caveat in adding extended capabilities in ncurses is that if the names 3548# are longer than two characters, then they will not be visible through the 3549# termcap interface. 3550# 3551# Ms modifies the selection/clipboard. Its parameters are 3552# p1 = the storage unit (clipboard, selection or cut buffer) 3553# p2 = the base64-encoded clipboard content. 3554# 3555# Ss is used to set the cursor style as described by the DECSCUSR 3556# function to a block or underline. 3557# Se resets the cursor style to the terminal power-on default. 3558# 3559# Cs and Ce set and reset the cursor colour. 3560xterm+tmux|advanced xterm features used in tmux, 3561 Cr=\E]112\007, Cs=\E]12;%p1%s\007, 3562 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q, 3563 3564# This is another variant, for XFree86 4.0 xterm (T.Dickey) 3565# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color. 3566# To use it, your decTerminalID resource must be set to 200 or above. 3567# 3568# HTS \E H \210 3569# RI \E M \215 3570# SS3 \E O \217 3571# CSI \E [ \233 3572# 3573xterm-8bit|xterm terminal emulator 8-bit controls (X Window System), 3574 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX, 3575 colors#8, cols#80, it#8, lines#24, pairs#64, 3576 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3577 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z, 3578 civis=\233?25l, clear=\233H\2332J, 3579 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr, 3580 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J, 3581 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 3582 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h, 3583 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 3584 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, 3585 flash=\233?5h$<100/>\233?5l, home=\233H, 3586 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@, 3587 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m, 3588 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, 3589 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H, 3590 kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B, 3591 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~, 3592 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~, 3593 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, 3594 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, 3595 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~, 3596 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~, 3597 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M, 3598 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i, 3599 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m, 3600 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l, 3601 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, 3602 rs1=\Ec, 3603 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, 3604 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm, 3605 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3606 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3607 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 3608 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, 3609 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=, 3610 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR, 3611 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd, 3612 3613xterm-hp|xterm with hpterm function keys, 3614 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 3615 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, 3616 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ, 3617 knp=\ES, kpp=\ET, use=xterm-basic, 3618 3619xterm-sco|xterm with SCO function keys, 3620 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 3621 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, 3622 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, 3623 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, 3624 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, 3625 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, 3626 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, 3627 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, 3628 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, 3629 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, 3630 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 3631 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I, 3632 use=xterm-basic, 3633 3634# The xterm-new description has all of the features, but is not completely 3635# compatible with vt220. If you are using a Sun or PC keyboard, set the 3636# sunKeyboard resource to true: 3637# + maps the editing keypad 3638# + interprets control-function-key as a second array of keys, so a 3639# 12-fkey keyboard can support vt220's 20-fkeys. 3640# + maps numeric keypad "+" to ",". 3641# + uses DEC-style control sequences for the application keypad. 3642# 3643xterm-vt220|xterm emulating vt220, 3644 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 3645 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 3646 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 3647 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, 3648 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3649 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 3650 use=xterm+app, use=xterm+edit, use=xterm-basic, 3651 use=vt220+keypad, 3652 3653xterm-vt52|xterm emulating dec vt52, 3654 cols#80, it#8, lines#24, 3655 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3656 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, 3657 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK, 3658 home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 3659 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, 3660 3661xterm-noapp|xterm with cursor keys in normal mode, 3662 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp, 3663 use=xterm, 3664 3665xterm-24|vs100|xterms|xterm terminal emulator (X Window System), 3666 lines#24, use=xterm-old, 3667 3668# This is xterm for ncurses. 3669xterm|xterm terminal emulator (X Window System), 3670 use=xterm-new, 3671 3672# This entry assumes that xterm's handling of VT100 SI/SO is disabled by 3673# setting the vt100Graphics resource to false. 3674xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode, 3675 U8#1, use=xterm, 3676 3677# These entries allow access to the X titlebar and icon name as a status line. 3678# Note that twm (and possibly window managers descended from it such as tvtwm, 3679# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess 3680# with it. 3681xterm+sl|access X title line and icon name, 3682 hs, 3683 wsl#40, 3684 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm, 3685xterm+sl-twm|access X title line (pacify twm-descended window managers), 3686 hs, 3687 wsl#40, 3688 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm, 3689 3690# 3691# The following xterm variants don't depend on your base version 3692# 3693# xterm with bold instead of underline 3694xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold, 3695 smso=\E[7m, smul=\E[1m, use=xterm-old, 3696 3697# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file 3698xterm-nic|xterm with ich/ich1 suppressed for non-curses programs, 3699 ich@, ich1@, use=xterm, 3700# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996 3701xterm1|xterm terminal emulator ignoring the alternate screen buffer, 3702 rmcup@, smcup@, use=xterm, 3703 3704#### KTERM 3705# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr) 3706# (kterm should not invoke DEC Graphics as the alternate character set 3707# -- Kenji Rikitake) 3708# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics 3709# -- MATSUMOTO Shoji) 3710# kterm implements acsc via built-in table of X Drawable's 3711kterm|kterm kanji terminal emulator (X window system), 3712 eslok, hs, XT, 3713 ncv@, 3714 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~, 3715 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F, 3716 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7, 3717 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 3718 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, 3719 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color, 3720kterm-color|kterm-co|kterm with ANSI colors, 3721 ncv@, use=kterm, use=ecma+color, 3722 3723#### Other XTERM 3724# These (xtermc and xtermm) are distributed with Solaris. They refer to a 3725# variant of xterm which is apparently no longer supported, but are interesting 3726# because they illustrate SVr4 curses mouse controls - T.Dickey 3727xtermm|xterm terminal emulator (monocrome), 3728 OTbs, am, km, mir, msgr, xenl, 3729 btns#3, cols#80, it#8, lines#24, 3730 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3731 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 3732 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 3733 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3734 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3735 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 3736 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY, 3737 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 3738 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, 3739 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy, 3740 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU, 3741 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_, 3742 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM, 3743 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m, 3744 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 3745 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 3746 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3747 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1, 3748 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys, 3749 3750xtermc|xterm terminal emulator (color), 3751 colors#8, ncv#7, pairs#64, 3752 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 3753 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3754 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3755 use=xtermm, 3756 3757# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995 3758# Here's a termcap entry I've been using for xterm_color, which comes 3759# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the 3760# color stuff, I also have a status line defined as the window manager 3761# title bar. [I have translated it to terminfo -- ESR] 3762xterm-pcolor|xterm with color used for highlights and status line, 3763 bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m, 3764 smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6, 3765 3766# This describes the capabilities of color_xterm, an xterm variant from 3767# before ECMA-64 color support was folded into the main-line xterm release. 3768# This entry is straight from color_xterm's maintainer. 3769# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996 3770# The README's with the distribution also say that it supports SGR 21, 24, 25 3771# and 27, but they are not present in the terminfo or termcap. 3772color_xterm|cx|cx100|color_xterm color terminal emulator for X, 3773 OTbs, am, km, mir, msgr, xenl, XT, 3774 cols#80, it#8, lines#65, ncv@, 3775 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3776 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 3777 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3778 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3779 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3780 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 3781 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I, 3782 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 3783 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD, 3784 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~, 3785 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, 3786 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 3787 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~, 3788 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, 3789 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l, 3790 rmso=\E[27m, rmul=\E[24m, 3791 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<, 3792 sc=\E7, 3793 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3794 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h, 3795 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m, 3796 smul=\E[4m, use=ecma+color, use=vt220+keypad, 3797 3798# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of 3799# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support 3800# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This 3801# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except 3802# that each of those implements the home, end, delete keys differently. 3803# 3804# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce 3805# colors; note that this is not compatible with the 5.2 version. 3806# csw (2002-05-15): make xterm-color primary instead of nxterm, to 3807# match XFree86's xterm.terminfo usage and prevent circular links 3808xterm-color|nxterm|generic color xterm, 3809 ncv@, 3810 op=\E[m, use=xterm-r6, use=klone+color, 3811 3812# This entry describes an xterm with Sun-style function keys enabled 3813# via the X resource setting "xterm*sunFunctionKeys:true" 3814# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same. 3815# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z> 3816# because we want it to be seen as <kcpy>. 3817# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance 3818# with their Sun keyboard labels instead. 3819# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996 3820xterm-sun|xterm with sunFunctionKeys true, 3821 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB, 3822 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z, 3823 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z, 3824 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z, 3825 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z, 3826 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z, 3827 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z, 3828 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z, 3829 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z, 3830 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, 3831 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, 3832 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z, 3833 use=xterm-basic, 3834xterms-sun|small (80x24) xterm with sunFunctionKeys true, 3835 cols#80, lines#24, use=xterm-sun, 3836 3837#### GNOME (VTE) 3838# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0 3839gnome-rh62|Gnome terminal, 3840 bce, 3841 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 3842 use=xterm-color, 3843 3844# GNOME Terminal 1.4.0.4 (Redhat 7.2) 3845# 3846# This implements a subset of vt102 with a random selection of features from 3847# other terminals such as color and function-keys. 3848# 3849# shift-f1 to shift-f10 are f11 to f20 3850# 3851# NumLock changes the application keypad to approximate vt100 keypad, except 3852# that there is no escape sequence matching comma (,). 3853# 3854# Other defects observed: 3855# vt100 LNM mode is not implemented. 3856# vt100 80/132 column mode is not implemented. 3857# vt100 DECALN is not implemented. 3858# vt100 DECSCNM mode is not implemented, so flash does not work. 3859# vt100 TBC (tab reset) is not implemented. 3860# xterm alternate screen controls do not restore cursor position properly 3861# it hangs in tack after running function-keys test. 3862gnome-rh72|GNOME Terminal, 3863 bce, km@, 3864 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP, 3865 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l, 3866 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;, 3867 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color, 3868 3869# GNOME Terminal 2.0.1 (Redhat 8.0) 3870# 3871# Documentation now claims it implements vt220 (which is demonstrably false). 3872# However, it does implement ECH, which is a vt220 feature. And there are 3873# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display 3874# more of its bugs using vttest. 3875# 3876# However, note that bce and msgr are broken in this release. Tabs (tbc and 3877# hts) are broken as well. Sometimes flash (as in xterm-new) works. 3878# 3879# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu 3880# operations. Shift-tab generates a distinct sequence so it can be argued 3881# that it implements kcbt. 3882gnome-rh80|GNOME Terminal, 3883 bce@, msgr@, 3884 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177, 3885 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72, 3886 3887# GNOME Terminal 2.2.1 (Redhat 9.0) 3888# 3889# bce and msgr are repaired. 3890gnome-rh90|GNOME Terminal, 3891 bce, msgr, 3892 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C, 3893 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g, 3894 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys, 3895 use=gnome-rh80, 3896 3897# GNOME Terminal 2.14.2 (Fedora Core 5) 3898# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002. 3899gnome-fc5|GNOME Terminal, 3900 rs1=\Ec, 3901 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 3902 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90, 3903 3904# GNOME Terminal 2.18.1 (2007 snapshot) 3905# 3906# For any "recent" version of gnome-terminal, it is futile to attempt to 3907# support modifiers on cursor- and keypad keys because the program usually 3908# is hardcoded to set $TERM to "xterm", and on startup, it builds a subset 3909# of the keys (which more/less correspond to the termcap values), and will 3910# interpret those according to the $TERM value, but others not in the 3911# terminfo according to some constantly changing set of hacker guidelines -TD 3912vte-2007|VTE in GNOME Terminal snapshot 2.18.1, 3913 use=xterm+pcc2, use=gnome-fc5, 3914gnome-2007|GNOME Terminal snapshot 2.18.1, 3915 use=vte-2007, 3916 3917# GNOME Terminal 2.22.3 (2008 snapshot) 3918# 3919# In vttest, it claims to be a vt220 with national replacement character-sets, 3920# but aside from the identifier string, implements only a small fraction of 3921# vt220's behavior, which will make it less usable on a VMS system (unclear 3922# what the intent of the developer is, since the NRC feature exposed in vttest 3923# by this change does not work). 3924vte-2008|VTE in GNOME Terminal snapshot 2.22.3, 3925 use=vte+pcfkeys, use=vte-2007, 3926gnome-2008|GNOME Terminal snapshot 2.22.3, 3927 use=vte-2008, 3928 3929# GNOME terminal may automatically use the contents of the "xterm" terminfo to 3930# supply key information which is not built into the program. With 2.22.3, 3931# this list is built into the program (which addresses the inadvertant use of 3932# random terminfo data, though using a set of values which does not correspond 3933# to any that xterm produces - still not solving the problem that GNOME 3934# terminal hardcodes the $TERM variable as "xterm"). 3935# 3936# terminfo modifier code keys 3937# kf13-kf24 shift 2 F1 to F12 3938# kf25-kf36 control 5 F1 to F12 3939# kf37-kf48 shift/control 6 F1 to F12 3940# kf49-kf60 alt 3 F1 to F12 3941# kf61-kf63 shift-alt 4 F1 to F3 3942# 3943# The parameters with \EO (SS3) are technically an error, since SS3 should have 3944# no parameters. This appears to be rote copying based on xterm+pcc0. 3945vte+pcfkeys|VTE's variation on xterm+pcfkeys, 3946 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R, 3947 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q, 3948 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P, 3949 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S, 3950 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S, 3951 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R, 3952 use=xterm+pcfkeys, 3953gnome+pcfkeys|VTE's variation on xterm+pcfkeys, 3954 use=vte+pcfkeys, 3955 3956vte|VTE aka GNOME Terminal, 3957 use=vte-2008, 3958gnome|GNOME Terminal, 3959 use=vte, 3960 3961# palette is hardcoded... 3962vte-256color|VTE with xterm 256-colors, 3963 initc@, use=xterm+256color, use=vte, 3964gnome-256color|GNOME Terminal with xterm 256-colors, 3965 use=vte-256color, 3966 3967# XFCE Terminal 0.2.5.4beta2 3968# 3969# This is based on some of the same source code, e.g., the VTE library, as 3970# gnome-terminal, but has fewer features, fails more screens in vttest. 3971# Since most of the terminfo-related behavior is due to the VTE library, 3972# the terminfo is the same as gnome-terminal. 3973xfce|Xfce Terminal, 3974 use=vte, 3975 3976#### Other GNOME 3977# Multi-Gnome-Terminal 1.6.2 3978# 3979# This does not use VTE, and does have different behavior (compare xfce and 3980# gnome). 3981mgt|Multi GNOME Terminal, 3982 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333, 3983 3984#### KDE 3985# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce 3986# or not is debatable). 3987kvt|KDE terminal, 3988 bce, km@, 3989 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color, 3990 3991# Konsole 1.0.1 3992# (formerly known as kvt) 3993# 3994# This program hardcodes $TERM to 'xterm', which is not accurate. However, to 3995# simplify this entry (and point out why konsole isn't xterm), we base this on 3996# xterm-r6. The default keyboard appears to be 'linux'. 3997# 3998# Notes: 3999# a) konsole implements several features from XFree86 xterm, though none of 4000# that is documented - except of course in its source code - apparently 4001# because its implementors are unaccustomed to reading documentation - as 4002# evidenced by the sparse and poorly edited documentation distributed with 4003# konsole. Some features such as the 1049 private mode are recognized but 4004# incorrectly implemented as a duplicate of the 47 private mode. 4005# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad 4006# sends PC-style escapes rather than vt100. 4007# c) fails vttest menu 3 (Test of character sets) because it does not properly 4008# parse some control sequences. Also fails vttest Primary Device Attributes 4009# by sending a bogus code (in the source it says it's supposed to be a 4010# vt220, which is doubly incorrect because it does not implement vt220 4011# control sequences except for a few special cases). Treat it as a 4012# mildly-broken vt102. 4013# 4014# Update for konsole 1.3.2: 4015# The 1049 private mode works (but see the other xterm screens in vttest). 4016# Primary Device Attributes now returns the code for a vt100 with advanced 4017# video option. Perhaps that's intended to be a "mildly-broken vt102". 4018# 4019# Updated for konsole 1.6.4: 4020# add konsole-solaris 4021# 4022# Updated for konsole 1.6.6: 4023# add control-key modifiers for function-keys, etc. 4024# 4025# vttest menu 1 shows that both konsole and gnome terminal do wrapping 4026# different from xterm (and vt100's). They have the same behavior in this 4027# detail, but it is unclear which copies the other. 4028konsole-base|KDE console window, 4029 bce, km@, npc, XT, 4030 ncv@, 4031 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h, 4032 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, 4033 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@, 4034 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, 4035 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, 4036 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l, 4037 rmso=\E[27m, rmul=\E[24m, 4038 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 4039 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4040 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd, 4041 use=ecma+color, use=xterm-r6, 4042konsole-linux|KDE console window with linux keyboard, 4043 kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, 4044 kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, 4045 kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 4046 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4047 use=konsole-base, 4048konsole-solaris|KDE console window with Solaris keyboard, 4049 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100, 4050# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather 4051# than testing the code. 4052konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm, 4053 kend=\E[4~, khome=\E[1~, use=konsole-vt100, 4054# The value for kbs reflects local customization rather than the settings used 4055# for XFree86 xterm. 4056konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm, 4057 kend=\EOF, khome=\EOH, use=konsole+pcfkeys, 4058 use=konsole-vt100, 4059# Konsole does not implement shifted cursor-keys. 4060konsole+pcfkeys|konsole subset of xterm+pcfkeys, 4061 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2, 4062 use=xterm+pcf0, 4063# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but 4064# it is still useful for deriving the other entries. 4065konsole-vt100|KDE console window with vt100 (sic) keyboard, 4066 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~, 4067 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, 4068 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~, 4069 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4070 khome=\E[H, use=konsole-base, 4071konsole-vt420pc|KDE console window with vt420 pc keyboard, 4072 kbs=^H, kdch1=\177, use=konsole-vt100, 4073konsole-16color|klone of xterm-16color, 4074 ncv#32, use=ibm+16color, use=konsole, 4075# make a default entry for konsole 4076konsole|KDE console window, 4077 use=konsole-xf4x, 4078 4079# palette is hardcoded... 4080konsole-256color|KDE console window with xterm 256-colors, 4081 initc@, use=xterm+256color, use=konsole, 4082 4083#### MLTERM 4084# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD 4085# 4086# It is nominally a vt102 emulator, with features borrowed from rxvt and 4087# xterm. 4088# 4089# The function keys are numbered based on shift/control/alt modifiers, except 4090# that the control-modifier itself is used to spawn a new copy of mlterm (the 4091# "-P" option). So control/F1 to control/F12 may not be usable, depending on 4092# how it is configured. 4093# 4094# kf1 to kf12 \E[11~ to \E[24~ 4095# shift kf1 to kf12 \E[11;2~ to \E[24;2~ 4096# alt kf1 to kf12 \E[11;3~ to \E[24;3~ 4097# shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~ 4098# control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe) 4099# control/shift kf1 to kf12 \E[11;6~ to \E[24;6~ 4100# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~ 4101# control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~ 4102# 4103mlterm|multi lingual terminal emulator, 4104 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT, 4105 colors#8, cols#80, it#8, lines#24, pairs#64, 4106 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4107 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 4108 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 4109 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4110 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4111 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4112 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 4113 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=, 4114 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 4115 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, 4116 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, 4117 kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 4118 kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, 4119 khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M, 4120 knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i, 4121 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, 4122 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, 4123 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 4124 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l, 4125 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4126 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 4127 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h, 4128 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 4129 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 4130 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2, 4131 4132# The insert/delete/home/end keys do not respond to modifiers because mlterm 4133# looks in its termcap to decide which string to send. If it used terminfo 4134# (when available), it could use the extended names introduced for xterm. 4135mlterm+pcfkeys|fragment for PC-style fkeys, 4136 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C, 4137 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B, 4138 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~, 4139 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D, 4140 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~, 4141 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~, 4142 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C, 4143 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A, 4144 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A, 4145 4146mlterm-256color|mlterm 3.0 with xterm 256-colors, 4147 use=xterm+256color, use=rxvt, 4148 4149#### RXVT 4150# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997 4151# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997 4152# Notes: 4153# rxvt 2.21b uses 4154# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O, 4155# but some applications don't work with that. 4156# It also has an AIX extension 4157# box2=lqkxjmwuvtn, 4158# and 4159# ech=\E[%p1%dX, 4160# but the latter does not work correctly. 4161# 4162# The distributed terminfo says it implements hpa and vpa, but they are not 4163# implemented correctly, using relative rather than absolute positioning. 4164# 4165# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM. 4166# Since rxvt is not really compatible with xterm, it should be configured as 4167# "rxvt" or "rxvt-color". 4168# 4169# removed dch/dch1 because they are inconsistent with bce/ech -TD 4170# remove km as per tack test -TD 4171rxvt-basic|rxvt terminal base (X Window System), 4172 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT, 4173 cols#80, it#8, lines#24, 4174 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4175 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 4176 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 4177 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4178 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4179 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4180 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 4181 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I, 4182 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 4183 ind=^J, is1=\E[?47l\E=\E[?1l, 4184 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H, 4185 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 4186 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m, 4187 rmul=\E[24m, 4188 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 4189 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 4190 s0ds=\E(B, s1ds=\E(0, sc=\E7, 4191 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4192 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, 4193 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq, 4194 use=rxvt+pcfkeys, use=vt220+keypad, 4195# Key Codes from rxvt reference: 4196# 4197# Note: Shift + F1-F10 generates F11-F20 4198# 4199# For the keypad, use Shift to temporarily override Application-Keypad 4200# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock 4201# is off, escape sequences toggle Application-Keypad setting. 4202# Also note that values of Home, End, Delete may have been compiled 4203# differently on your system. 4204# 4205# Normal Shift Control Ctrl+Shift 4206# Tab ^I ESC [ Z ^I ESC [ Z 4207# BackSpace ^H ^? ^? ^? 4208# Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @ 4209# Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @ 4210# Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ 4211# Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @ 4212# Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @ 4213# Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @ 4214# Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @ 4215# End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @ 4216# Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ 4217# F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^ 4218# F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^ 4219# F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^ 4220# F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^ 4221# F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^ 4222# F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^ 4223# F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^ 4224# F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^ 4225# F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^ 4226# F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^ 4227# F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @ 4228# F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @ 4229# F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @ 4230# F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @ 4231# F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @ 4232# F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @ 4233# F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @ 4234# F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @ 4235# F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @ 4236# F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @ 4237# 4238# Application 4239# Up ESC [ A ESC [ a ESC O a ESC O A 4240# Down ESC [ B ESC [ b ESC O b ESC O B 4241# Right ESC [ C ESC [ c ESC O c ESC O C 4242# Left ESC [ D ESC [ d ESC O d ESC O D 4243# KP_Enter ^M ESC O M 4244# KP_F1 ESC O P ESC O P 4245# KP_F2 ESC O Q ESC O Q 4246# KP_F3 ESC O R ESC O R 4247# KP_F4 ESC O S ESC O S 4248# XK_KP_Multiply * ESC O j 4249# XK_KP_Add + ESC O k 4250# XK_KP_Separator , ESC O l 4251# XK_KP_Subtract - ESC O m 4252# XK_KP_Decimal . ESC O n 4253# XK_KP_Divide / ESC O o 4254# XK_KP_0 0 ESC O p 4255# XK_KP_1 1 ESC O q 4256# XK_KP_2 2 ESC O r 4257# XK_KP_3 3 ESC O s 4258# XK_KP_4 4 ESC O t 4259# XK_KP_5 5 ESC O u 4260# XK_KP_6 6 ESC O v 4261# XK_KP_7 7 ESC O w 4262# XK_KP_8 8 ESC O x 4263# XK_KP_9 9 ESC O y 4264# 4265# The source-code for rxvt actually defines mappings for F21-F35, using 4266# "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys 4267# are rare, so this entry uses the shift- and control-modifiers as in 4268# xterm+pcfkeys to define keys past F12. 4269# 4270# kIC is normally not used, since rxvt performs a paste for that (shifted 4271# insert), unless private mode 35 is set. 4272# 4273# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD 4274# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD 4275rxvt+pcfkeys|fragment for PC-style fkeys, 4276 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d, 4277 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B, 4278 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^, 4279 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 4280 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 4281 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 4282 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$, 4283 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^, 4284 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~, 4285 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^, 4286 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^, 4287 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^, 4288 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@, 4289 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4290 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~, 4291 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, 4292 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@, 4293 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@, 4294 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^, 4295 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa, 4296 4297rxvt|rxvt terminal emulator (X Window System), 4298 ncv@, 4299 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017, 4300 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color, 4301rxvt-color|rxvt terminal emulator (X Window System), 4302 use=rxvt, 4303rxvt-256color|rxvt 2.7.9 with xterm 256-colors, 4304 use=xterm+256color, use=rxvt, 4305rxvt-88color|rxvt 2.7.9 with xterm 88-colors, 4306 use=xterm+88color, use=rxvt, 4307rxvt-xpm|rxvt terminal emulator (X Window System), 4308 use=rxvt, 4309rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin, 4310 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 4311 use=rxvt, 4312rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin, 4313 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376, 4314 use=rxvt-cygwin, 4315 4316# This variant is supposed to work with rxvt 2.7.7 when compiled with 4317# NO_BRIGHTCOLOR defined. rxvt needs more work... 4318rxvt-16color|xterm with 16 colors like aixterm, 4319 ncv#32, use=ibm+16color, use=rxvt, 4320 4321#### MRXVT 4322# mrxvt 0.5.4 4323# 4324# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which 4325# makes its function-keys different from other flavors of rxvt -TD 4326mrxvt|multitabbed rxvt, 4327 XT, 4328 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B, 4329 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~, 4330 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~, 4331 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~, 4332 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~, 4333 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys, 4334 use=rxvt, 4335 4336mrxvt-256color|multitabbed rxvt with 256 colors, 4337 use=xterm+256color, use=mrxvt, 4338 4339#### ETERM 4340# From: Michael Jennings <mej@valinux.com> 4341# 4342# Eterm 0.9.3 4343# 4344# removed kf0 which conflicts with kf10 -TD 4345# remove cvvis which conflicts with cnorm -TD 4346# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT 4347# but does otherwise follow the rxvt+pcfkeys model -TD 4348# remove nonworking flash -TD 4349# remove km as per tack test -TD 4350Eterm|Eterm-color|Eterm with xterm-style color support (X Window System), 4351 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT, 4352 btns#5, cols#80, it#8, lines#24, lm#0, ncv@, 4353 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4354 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 4355 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 4356 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4357 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 4358 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4359 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 4360 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 4361 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 4362 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 4363 is1=\E[?47l\E>\E[?1l, 4364 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@, 4365 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H, 4366 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M, 4367 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 4368 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=, 4369 rmso=\E[27m, rmul=\E[24m, 4370 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 4371 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 4372 sc=\E7, 4373 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4374 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, 4375 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 4376 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys, 4377 use=ecma+color, 4378 4379Eterm-256color|Eterm with xterm 256-colors, 4380 use=xterm+256color, use=Eterm, 4381 4382Eterm-88color|Eterm with 88 colors, 4383 use=xterm+88color, use=Eterm, 4384 4385#### ATERM 4386# Based on rxvt 2.4.8, it has a few differences in key bindings 4387aterm|AfterStep terminal, 4388 XT, 4389 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt, 4390 4391#### XITERM 4392# xiterm 0.5-5.2 4393# This is not based on xterm's source... 4394# vttest shows several problems with keyboard, cursor-movements. 4395# see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm 4396xiterm|internationalized terminal emulator for X, 4397 km@, 4398 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6, 4399 4400 4401#### HPTERM 4402# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in 4403# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS 4404# chars look like --esr) 4405hpterm|X-hpterm|hp X11 terminal emulator, 4406 am, da, db, mir, xhp, 4407 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0, 4408 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, 4409 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, 4410 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK, 4411 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H, 4412 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 4413 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, 4414 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 4415 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, 4416 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El, 4417 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 4418 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 4419 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 4420 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET, 4421 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, 4422 rmul=\E&d@, 4423 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, 4424 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, 4425 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 4426# HPUX 11 provides a color version. 4427hpterm-color|HP X11 terminal emulator with color, 4428 ccc, 4429 colors#64, pairs#8, 4430 home=\E&a0y0C, 4431 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI, 4432 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm, 4433 4434#### EMU 4435# This is for the extensible terminal emulator on the X11R6 contrib tape. 4436# It corresponds to emu's internal emulation: 4437# emu -term emu 4438# emu's default sets TERM to "xterm", but that doesn't work well -TD 4439# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD 4440# fixes: add civis, cnorm, sgr -TD 4441emu|emu native mode, 4442 am, bce, mir, msgr, xon, 4443 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200, 4444 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244, 4445 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;, 4446 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;, 4447 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC, 4448 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA, 4449 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;, 4450 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I, 4451 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, 4452 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, 4453 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, 4454 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, 4455 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, 4456 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, 4457 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, 4458 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel, 4459 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES, 4460 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;, 4461 setaf=\Er%i%p1%d;, 4462 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;, 4463 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej, 4464 4465# vt220 Terminfo entry for the Emu emulation, corresponds to 4466# emu -term vt220 4467# with NumLock set (to make the keypad transmit kf0-kf9). 4468# fixes: add am, xenl, corrected sgr0 -TD 4469emu-220|Emu-220 (vt200-7bit mode), 4470 am, xenl, xon, 4471 cols#80, it#8, lines#24, vt#200, 4472 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 4473 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l, 4474 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, 4475 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D, 4476 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 4477 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, 4478 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M, 4479 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I, 4480 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL, 4481 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h, 4482 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 4483 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq, 4484 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ, 4485 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~, 4486 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~, 4487 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~, 4488 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw, 4489 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, 4490 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m, 4491 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m, 4492 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7, 4493 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 4494 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=, 4495 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, 4496 4497#### MVTERM 4498# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI, 4499# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings 4500# indicate that it emulates more than one terminal, but incompletely. 4501# 4502# This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net> 4503# It is based on vt102's entry, with some subtle differences, but also 4504# has status line 4505# supports ANSI colors (except for 'op' string) 4506# apparently implements alternate screen like xterm 4507# does not use padding, of course. 4508mvterm|vv100|SwitchTerm aka mvTERM, 4509 am, eslok, hs, km, mir, msgr, xenl, 4510 colors#8, cols#80, it#8, lines#24, pairs#64, 4511 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4512 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 4513 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4514 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4515 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4516 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 4517 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, 4518 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 4519 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, 4520 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy, 4521 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, 4522 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 4523 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m, 4524 rmul=\E[m, 4525 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H, 4526 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4527 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4528 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, 4529 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 4530 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys, 4531 4532#### MTERM 4533# 4534# This application is available by email from <mouse@Rodents.Montreal.QC.CA>. 4535# 4536# "mterm -type ansi" sets $TERM to "ansi" 4537mterm-ansi|ANSI emulation, 4538 am, bw, mir, msgr, 4539 it#8, 4540 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4541 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 4542 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 4543 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 4544 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 4545 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, 4546 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, 4547 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, 4548 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, 4549 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m, 4550 rmul=\E[24m, 4551 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 4552 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, 4553 vpa=\E[%i%p1%dd, 4554# mterm normally sets $TERM to "mterm" 4555mterm|mouse-sun|Der Mouse term, 4556 am, bw, mir, 4557 it#8, 4558 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S, 4559 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C, 4560 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W, 4561 rmir=^O, rmso=^T, smir=^Q, smso=^V, 4562# "mterm -type decansi" sets $TERM to "decansi" 4563# 4564# note: kdch1, kfnd, kslt are in the source code, but do not work -TD 4565decansi|ANSI emulation with DEC compatibility hacks, 4566 am, mir, msgr, xenl, 4567 colors#8, it#8, pairs#64, 4568 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4569 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 4570 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 4571 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 4572 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 4573 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4574 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 4575 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0, 4576 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL, 4577 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, 4578 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB, 4579 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~, 4580 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 4581 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 4582 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 4583 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 4584 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, 4585 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m, 4586 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 4587 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7, 4588 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4589 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 4590 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, 4591 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR, 4592 u7=\E[6n, vpa=\E[%i%p1%dd, 4593 4594#### VWM 4595# 4596# vwmterm is a terminal emulator written for the VWM console window manager 4597# 4598vwmterm|(vwm term), 4599 am, bce, ccc, mir, msgr, npc, xenl, xon, 4600 colors#8, pairs#64, 4601 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4602 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 4603 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, 4604 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 4605 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 4606 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K, 4607 home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D, 4608 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 4609 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~, 4610 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 4611 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4612 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m, 4613 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec, 4614 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4615 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 4616 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h, 4617 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m, 4618 4619#### MGR 4620# 4621# MGR is a Bell Labs window system lighter-weight than X. 4622# These entries describe MGR's xterm-equivalent. 4623# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997 4624# 4625 4626mgr|Bellcore MGR (non X) window system terminal emulation, 4627 am, km, 4628 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M, 4629 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er, 4630 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h, 4631 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>, 4632 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u, 4633 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>, 4634 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 4635 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S, 4636 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n, 4637 smul=\E4n, 4638mgr-sun|Mgr window with Sun keyboard, 4639 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z, 4640 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z, 4641 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, 4642 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, 4643 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, 4644 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z, 4645 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr, 4646mgr-linux|Mgr window with Linux keyboard, 4647 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~, 4648 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~, 4649 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, 4650 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4651 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr, 4652 4653#### SIMPLETERM 4654# st.suckless.org 4655# st-0.1.1 4656# 4657# Note: the original terminfo description uses leading blank to persuade 4658# ncurses to use "st" as its name. Proper fix for that is to use "st" as an 4659# alias. 4660# 4661# Reading the code shows it should work for aixterm 16-colors 4662# - added st-16color 4663# 4664# Using tack: 4665# - set eo (erase-overstrike) 4666# - set xenl 4667# - tbc doesn't work 4668# - hts works 4669# - cbt doesn't work 4670# - shifted cursor-keys send sequences like rxvt 4671# - sgr referred to unimplemented "invis" mode. 4672# Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis 4673simpleterm|st| simpleterm, 4674 am, eo, mir, msgr, ul, xenl, 4675 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, 4676 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4677 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, 4678 cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 4679 cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4680 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4681 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 4682 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, 4683 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177, kcub1=\E[D, 4684 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 4685 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 4686 kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~, 4687 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4688 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8, 4689 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7, 4690 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4691 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 4692 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m, 4693st-16color|simpleterm with 16-colors, 4694 use=ibm+16color, use=simpleterm, 4695# 256 colors "works", but when running xterm's test-scripts, some garbage is 4696# shown in the titlebar. 4697st-256color|simpleterm with 256 colors, 4698 ccc@, 4699 initc@, use=simpleterm, use=xterm+256color, 4700 4701### TERMINATOR 4702# http://software.jessies.org/terminator/ 4703# Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit 4704# Debian/current -TD (2011/8/20) 4705# 4706# There are some packaging problems: 4707# a) using Java, the program starts off using 50Mb, and climbs from there, 4708# up to 114Mb after testing (no scrollback). 4709# b) it insists on reinstalling its terminal description in $HOME/.terminfo 4710# (two copies, just in case the host happens to be Mac OS X). 4711# I deleted this after testing with tack. 4712# 4713# Issues/features found with tack: 4714# a) tbc does not work (implying that hts also is broken). 4715# Comparing with the tabs utility shows a problem with the last tabstop on 4716# a line. 4717# b) has xterm-style shifted function-key strings 4718# meta also is used, but control is ignored. 4719# c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta) 4720# d) some combinations of shift/control send xterm-style sequences for 4721# insert/delete/home/end. 4722# e) numeric keypad sends only numbers (compare with vttest). 4723# f) meta mode (km) is not implemented. 4724# 4725# Issues found with ncurses test-program: 4726# a) bce is inconsistently implemented 4727# b) widths of Unicode values above 256 do not always agree with wcwidth. 4728# 4729# Checked with vttest, found low degree of compatibility there. 4730# 4731# Checked with xterm's scripts, found that the 256-color palette is fixed. 4732# 4733# Fixes: 4734# a) add sgr string 4735# b) corrected sgr0 to reset alternate character set 4736# c) modified smacs/rmacs to use SCS rather than SI/SO 4737# d) removed bce 4738# e) removed km 4739terminator|Terminator no line wrap, 4740 eo, mir, msgr, xenl, xon, 4741 colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767, 4742 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4743 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, 4744 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 4745 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 4746 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 4747 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 4748 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]2;\007, ed=\E[J, el=\E[K, 4749 el1=\E[1K, enacs=\E(B\E)0, flash=^G, fsl=^G, home=\E[H, 4750 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, 4751 ind=^J, is1=\E[?47l\E=\E[?1l, 4752 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H, 4753 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 4754 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, 4755 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 4756 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 4757 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4758 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 4759 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, 4760 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 4761 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 4762 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>, 4763 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm, 4764 setaf=\E[38;5;%p1%dm, 4765 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%;m%?%p9%t\E(0%e\E(B%;, 4766 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h, 4767 smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1, 4768 vpa=\E[%i%p1%dd, 4769 4770######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS 4771# 4772 4773# Columbus UNIX virtual terminal. This terminal also appears in 4774# UNIX 4.0 and successors as line discipline 1 (?), but is 4775# undocumented and does not really work quite right. 4776cbunix|cb unix virtual terminal, 4777 OTbs, am, da, db, 4778 cols#80, lines#24, lm#0, 4779 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 4780 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL, 4781 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB, 4782 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A, 4783 smso=\Ea^D, smul=\Ea^A, 4784# (vremote: removed obsolete ":nl@:" -- esr) 4785vremote|virtual remote terminal, 4786 am@, 4787 cols#79, use=cbunix, 4788 4789pty|4bsd pseudo teletype, 4790 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!, 4791 smso=\Ea$, smul=\Ea!, use=cbunix, 4792 4793# The codes supported by the term.el terminal emulation in GNU Emacs 19.30 4794eterm|gnu emacs term.el terminal emulation, 4795 am, mir, xenl, 4796 cols#80, lines#24, 4797 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, 4798 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4799 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4800 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4801 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 4802 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 4803 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m, 4804 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m, 4805 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m, 4806 smul=\E[4m, 4807 4808# The codes supported by the term.el terminal emulation in GNU Emacs 22.2 4809eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96, 4810 am, mir, msgr, xenl, 4811 colors#8, cols#80, lines#24, pairs#64, 4812 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 4813 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4814 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4815 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4816 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 4817 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 4818 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177, 4819 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 4820 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~, 4821 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m, 4822 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, 4823 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm, 4824 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m, 4825 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, 4826 u6=\E[%i%d;%dR, u7=\E[6n, 4827 4828# Entries for use by the `screen' program by Juergen Weigert, 4829# Michael Schroeder, Oliver Laumann. The screen and 4830# screen-w entries came with version 3.7.1. The screen2 and screen3 entries 4831# come from University of Wisconsin and may be older. 4832# (screen: added <cnorm> on ANSI model -- esr) 4833# 4834# 'screen' defines extensions to termcap. Some are used in its terminal 4835# description: 4836# G0 (bool) Terminal can deal with ISO 2022 font selection sequences. 4837# AX (bool) Does understand ANSI set default fg/bg color 4838# (\E[39m / \E[49m). 4839# S0 (str) Switch charset 'G0' to the specified charset. 4840# E0 (str) Switch charset 'G0' back to standard charset. 4841# 4842# tested with screen 3.09.08 4843screen|VT 100/ANSI X3.64 virtual terminal, 4844 OTbs, OTpt, am, km, mir, msgr, xenl, G0, 4845 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1, 4846 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4847 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 4848 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M, 4849 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4850 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4851 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 4852 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 4853 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 4854 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 4855 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z, 4856 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 4857 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, 4858 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 4859 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4860 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 4861 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 4862 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, 4863 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7, 4864 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4865 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h, 4866 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B, 4867 S0=\E(%p1%c, use=ecma+color, 4868# The bce and status-line entries are from screen 3.9.13 (and require some 4869# changes to .screenrc). 4870screen-bce|VT 100/ANSI X3.64 virtual terminal with bce, 4871 bce, 4872 ech@, use=screen, 4873screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line, 4874 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen, 4875 4876# ====================================================================== 4877# Entries for GNU Screen with 16 colors. 4878# Those variations permit to benefit from 16 colors palette, and from 4879# bold font and blink attribute separated from bright colors. But they 4880# are less portable than the generic "screen" 8 color entries: Their 4881# usage makes real sense only if the terminals you attach and reattach 4882# do all support 16 color palette. 4883 4884screen-16color|GNU Screen with 16 colors, 4885 use=ibm+16color, use=screen, 4886 4887screen-16color-s|GNU Screen with 16 colors and status line, 4888 use=ibm+16color, use=screen-s, 4889 4890screen-16color-bce|GNU Screen with 16 colors and BCE, 4891 use=ibm+16color, use=screen-bce, 4892 4893screen-16color-bce-s|GNU Screen with 16 colors BCE and status line, 4894 bce, use=ibm+16color, use=screen-s, 4895 4896# ====================================================================== 4897# Entries for GNU Screen 4.02 with --enable-colors256. 4898 4899screen-256color|GNU Screen with 256 colors, 4900 ccc@, 4901 initc@, use=xterm+256color, use=screen, 4902 4903screen-256color-s|GNU Screen with 256 colors and status line, 4904 ccc@, 4905 initc@, use=xterm+256color, use=screen-s, 4906 4907screen-256color-bce|GNU Screen with 256 colors and BCE, 4908 ccc@, 4909 initc@, use=xterm+256color, use=screen-bce, 4910 4911screen-256color-bce-s|GNU Screen with 256 colors BCE and status line, 4912 bce, ccc@, 4913 initc@, use=xterm+256color, use=screen-s, 4914 4915# ====================================================================== 4916 4917# Read the fine manpage: 4918# When screen tries to figure out a terminal name for 4919# itself, it first looks for an entry named "screen.<term>", 4920# where <term> is the contents of your $TERM variable. If 4921# no such entry exists, screen tries "screen" (or "screen-w" 4922# if the terminal is wide (132 cols or more)). If even this 4923# entry cannot be found, "vt100" is used as a substitute. 4924# 4925# Notwithstanding the manpage, screen uses its own notion of the termcap 4926# and some keys from "screen.<term>" are ignored. Here is an entry which 4927# covers those (tested with screen 4.00.02) -TD 4928screen+fkeys|function-keys according to screen, 4929 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@, 4930 khome=\E[1~, kslt@, 4931# 4932# Here are a few customized entries which are useful -TD 4933# 4934# Notes: 4935# (a) screen does not support invis. 4936# (b) screen's implementation of bw is incorrect according to tack. 4937# (c) screen appears to hardcode the strings for khome/kend, making it 4938# necessary to override the "use=" clause's values (screen+fkeys). 4939# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry, 4940# which is NOT the same as the terminfo screen.<term>. 4941# (e) when screen finds one of these customized entries, it sets $TERM to 4942# match. Hence, no "screen.xterm" entry is provided, since that would 4943# create heartburn for people running remote xterm's. 4944# 4945# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV 4946# since the default translations override the built-in keycode 4947# translation. They are suppressed here to show what is tested by tack. 4948screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm, 4949 bce@, bw, 4950 invis@, kIC@, kNXT@, kPRV@, meml@, memu@, 4951 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m, 4952 use=screen+fkeys, use=xterm-new, 4953# xterm-r6 does not really support khome/kend unless it is propped up by 4954# the translations resource. 4955screen.xterm-r6|screen customized for X11R6 xterm, 4956 bw, use=screen+fkeys, use=xterm-r6, 4957# Color applications running in screen and TeraTerm do not play well together 4958# on Solaris because Sun's curses implementation gets confused. 4959screen.teraterm|disable ncv in teraterm, 4960 ncv#127, 4961 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 4962 use=screen+fkeys, use=screen, 4963# Other terminals 4964screen.rxvt|screen in rxvt, 4965 bw, XT, 4966 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 4967 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq, 4968 use=rxvt+pcfkeys, use=vt220+keypad, use=screen, 4969screen.Eterm|screen in Eterm, 4970 use=screen+fkeys, use=Eterm, 4971screen.mrxvt|screen in mrxvt, 4972 use=screen+fkeys, use=mrxvt, 4973screen.vte|screen in any VTE-based terminal, 4974 use=screen+fkeys, use=vte, 4975screen.gnome|screen in GNOME Terminal, 4976 use=screen+fkeys, use=gnome, 4977screen.konsole|screen in KDE console window, 4978 use=screen+fkeys, use=konsole, 4979# fix the backspace key 4980screen.linux|screen in linux console, 4981 bw, 4982 kbs=\177, kcbt@, use=screen+fkeys, use=screen, 4983screen.mlterm|screen in mlterm, 4984 use=screen+fkeys, use=mlterm, 4985 4986# The default "screen" entry is reasonably portable, but not optimal for the 4987# most widely-used terminal emulators. The "bce" capability is supported in 4988# screen since 3.9.13, and when used, will require fewer characters to be sent 4989# to the terminal for updates. 4990# 4991# If you are using only terminals which support bce, then you can use this 4992# feature in your screen configuration. 4993# 4994# Adding these lines to your ".screenrc" file will allow using these customized 4995# entries: 4996# term screen-bce 4997# bce on 4998# defbce on 4999screen-bce.xterm-new|screen optimized for modern xterm, 5000 bce, 5001 ech@, use=screen.xterm-new, 5002screen-bce.rxvt|screen optimized for rxvt, 5003 bce, 5004 ech@, use=screen.rxvt, 5005screen-bce.Eterm|screen optimized for Eterm, 5006 bce, 5007 ech@, use=screen.Eterm, 5008screen-bce.mrxvt|screen optimized for mrxvt, 5009 bce, 5010 ech@, use=screen.mrxvt, 5011screen-bce.gnome|screen optimized for GNOME-Terminal, 5012 bce, 5013 ech@, use=screen.gnome, 5014screen-bce.konsole|screen optimized for KDE console window, 5015 bce, 5016 ech@, use=screen.konsole, 5017screen-bce.linux|screen optimized for linux console, 5018 bce, 5019 ech@, use=screen.linux, 5020screen-bce.mlterm|screen optimized for mlterm, 5021 bce, 5022 ech@, use=screen.mlterm, 5023 5024screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols, 5025 cols#132, use=screen, 5026 5027screen2|old VT 100/ANSI X3.64 virtual terminal, 5028 cols#80, it#8, lines#24, 5029 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H, 5030 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 5031 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5032 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 5033 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL, 5034 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 5035 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, 5036 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, 5037 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m, 5038 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h, 5039 smso=\E[3m, smul=\E[4m, tbc=\E[3g, 5040# (screen3: removed unknown ":xv:LP:G0:" -- esr) 5041screen3|older VT 100/ANSI X3.64 virtual terminal, 5042 km, mir, msgr, 5043 cols#80, it#8, lines#24, 5044 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 5045 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5046 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 5047 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 5048 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 5049 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 5050 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD, 5051 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, 5052 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 5053 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec, 5054 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m, 5055 smul=\E[4m, tbc=\E[3g, 5056 5057# Francesco Potorti <F.Potorti@cnuce.cnr.it>: 5058# NCSA telnet is one of the most used telnet clients for the Macintosh. It has 5059# been maintained until recently by the National Center for Supercomputer 5060# Applications, and it is feature rich, stable and free. It can be downloaded 5061# from www.ncsa.edu. This terminfo description file is based on xterm-vt220, 5062# xterm+sl, and the docs at NCSA. It works well. 5063# 5064# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode 5065# The terminal options should be set as follows: 5066# Xterm sequences ON 5067# use VT wrap mode ON 5068# use Emacs arrow keys OFF 5069# CTRL-COMND is Emacs meta ON 5070# 8 bit mode ON 5071# answerback string: "ncsa-vt220-8" 5072# setup keys: all disabled 5073# 5074# Application mode is not used. 5075# 5076# Other special mappings: 5077# Apple VT220 5078# HELP Find 5079# HOME Insert here 5080# PAGEUP Remove 5081# DEL Select 5082# END Prev Screen 5083# PAGEDOWN Next Screen 5084# 5085# Though it supports ANSI color, NCSA Telnet uses color to represent blinking 5086# text. 5087# 5088# The status-line manipulation is a mapping of the xterm-compatible control 5089# sequences for setting the window-title. So you must use tsl and fsl in 5090# pairs, since the latter ends the string that is loaded to the window-title. 5091ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, 5092 am, hs, km, mir, msgr, xenl, 5093 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5094 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 5095 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 5096 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5097 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 5098 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5099 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 5100 dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 5101 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH, 5102 ich=\E[%p1%d@, if=/usr/share/tabset/vt100, 5103 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>, 5104 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H, 5105 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5106 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~, 5107 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~, 5108 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, 5109 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~, 5110 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i, 5111 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM, 5112 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l, 5113 rmso=\E[27m, rmul=\E[24m, 5114 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7, 5115 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 5116 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7, 5117 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;, 5118 u8=\E[?62;1;6c, use=ansi+enq, 5119ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, 5120 use=ncsa-m, use=klone+color, 5121ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, 5122 hs@, 5123 dsl@, fsl@, tsl@, use=ncsa, 5124ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, 5125 hs@, 5126 dsl@, fsl@, tsl@, use=ncsa-m, 5127# alternate -TD: 5128# The documented function-key mapping refers to the Apple Extended Keyboard 5129# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style 5130# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on 5131# some keyboards and many applications require these as F1-F4. 5132# 5133ncsa-vt220|NCSA Telnet using vt220-compatible function keys, 5134 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 5135 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 5136 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, 5137 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, 5138 kf8=\E[19~, kf9=\E[20~, use=ncsa, 5139 5140#### Pilot Pro Palm-Top 5141# 5142# Termcap for Top Gun Telnet and SSH on the Palm Pilot. 5143# http://www.ai/~iang/TGssh/ 5144pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional, 5145 OTbs, am, xenl, 5146 cols#39, lines#16, 5147 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J, 5148 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I, 5149 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s, 5150 rmso=\EB, smso=\Eb, 5151 5152# From: Federico Bianchi <bianchi@www.arte.unipi.it> 5153# These entries are for the Embeddable Linux Kernel System (ELKS) 5154# project - an heavily stripped down Linux to be run on 16 bit 5155# boxes or, eventually, to be used in embedded systems - and have been 5156# adapted from the stock ELKS termcap. The project itself looks stalled, 5157# and the latest improvements I know of date back to March 2000. 5158# 5159# To cope with the ELKS dumb console I added an "elks-glasstty" entry; 5160# as an added bonus, this deals with all the capabilities common to 5161# both VT52 and ANSI (or, eventually, "special") modes. 5162 5163elks-glasstty|ELKS glass-TTY capabilities, 5164 OTbs, am, 5165 cols#80, it#8, lines#25, 5166 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 5167 nel=^M^J, 5168 5169elks-vt52|ELKS vt52 console, 5170 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 5171 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK, 5172 home=\EH, use=elks-glasstty, 5173 5174elks-ansi|ELKS ANSI console, 5175 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 5176 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 5177 rmso=\E[m, smso=\E[7m, use=elks-glasstty, 5178 5179# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation 5180# instead of VT52, but the "elks" entry still refers to the latter. 5181 5182elks|default ELKS console, 5183 use=elks-vt52, 5184 5185# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS 5186# one but in screen size 5187 5188sibo|ELKS SIBO console, 5189 cols#61, it#8, lines#20, use=elks-vt52, 5190 5191######## COMMERCIAL WORKSTATION CONSOLES 5192# 5193 5194#### Alpha consoles 5195# 5196 5197# This is from the OSF/1 Release 1.0 termcap file 5198pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation, 5199 am, xon, 5200 cols#80, lines#25, 5201 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 5202 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 5203 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H, 5204 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 5205 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m, 5206 5207#### Sun consoles 5208# 5209 5210# :is1: resets scrolling region in case a previous user had used "tset vt100" 5211oldsun|Sun Microsystems Workstation console, 5212 OTbs, am, km, mir, msgr, 5213 cols#80, it#8, lines#34, 5214 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, 5215 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 5216 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, 5217 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 5218 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5219 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, 5220 rmso=\E[m, sgr0=\E[m, smso=\E[7m, 5221# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995 5222# <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com> 5223# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998) 5224sun-il|Sun Microsystems console with working insert-line, 5225 am, km, msgr, 5226 cols#80, lines#34, 5227 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 5228 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 5229 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, 5230 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 5231 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 5232 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z, 5233 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z, 5234 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z, 5235 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z, 5236 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z, 5237 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, 5238 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, 5239 smso=\E[7m, u8=\E[1t, u9=\E[11t, 5240# On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il> 5241# flake out on the last line. Unfortunately, without them the terminal has no 5242# way to scroll. 5243sun-cgsix|sun-ss5|Sun SparcStation 5 console, 5244 il@, il1@, use=sun-il, 5245# If you are using an SS5, change the sun definition to use sun-ss5. 5246sun|sun1|sun2|Sun Microsystems Inc. workstation console, 5247 use=sun-il, 5248 5249# From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985 5250sun-s|Sun Microsystems Workstation window with status line, 5251 hs, 5252 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun, 5253sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs, 5254 hs, 5255 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e, 5256sun-48|Sun 48-line window, 5257 cols#80, lines#48, use=sun, 5258sun-34|Sun 34-line window, 5259 cols#80, lines#34, use=sun, 5260sun-24|Sun 24-line window, 5261 cols#80, lines#24, use=sun, 5262sun-17|Sun 17-line window, 5263 cols#80, lines#17, use=sun, 5264sun-12|Sun 12-line window, 5265 cols#80, lines#12, use=sun, 5266sun-1|Sun 1-line window for sysline, 5267 eslok, hs, 5268 cols#80, lines#1, 5269 dsl=^L, fsl=\E[K, tsl=^M, use=sun, 5270sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character, 5271 ich1@, rmir@, smir@, use=sun, 5272sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history, 5273 lines#35, 5274 rmcup=\E[>4h, smcup=\E[>4l, use=sun, 5275sun-type4|Sun Workstation console with type 4 keyboard, 5276 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z, 5277 kcuu1=\E[215z, use=sun-il, 5278 5279# Most of the current references to sun-color are from users wondering why this 5280# is the default on install. Details from reading the wscons manpage, adding 5281# cub, etc., here (rather than in the base sun-il entry) since it is not clear 5282# when those were added -TD (2005-05-28) 5283# 5284# According to wscons manpage, color is supported only on IA systems. 5285# Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons 5286# does not list these. It also sets ncv#3, however that corresponds to 5287# underline and standout. 5288# 5289# Since the documentation and terminfo do not agree, see also current code at 5290# http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c 5291# 5292# That (actually a different driver which "supports" sun-color) also supports 5293# these features: 5294# vpa=\E[%i%p1%dd 5295# hpa=\E[%i%p1%d` 5296# cbt=\E[Z 5297# dim=\E[2m 5298# blink=\E[5m 5299# It supports bold -TD (2009-09-19) 5300# Color support is up from 8 to 16 to 256. 5301sun-color|Sun Microsystems Workstation console with color support (IA systems), 5302 colors#256, ncv#3, pairs#32767, 5303 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 5304 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, setab=\E[4%p1%dm, 5305 setaf=\E[3%p1%dm, 5306 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 5307 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 5308 smso=\E[1m, smul=\E[4m,rmul=\E[24m,use=sun, 5309 5310#### Iris consoles 5311# 5312 5313# (wsiris: this had extension capabilities 5314# :HS=\E7F2:HE=\E7F7:\ 5315# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite: 5316# See the note on Iris extensions near the end of this file. 5317# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> & 5318# <flash> from BRL -- esr) 5319wsiris|iris40|iris emulating a 40 line visual 50 (approximately), 5320 OTbs, OTnc, OTpt, am, 5321 OTkn#3, cols#80, it#8, lines#40, 5322 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB, 5323 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 5324 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK, 5325 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL, 5326 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB, 5327 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, 5328 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI, 5329 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P, 5330 smul=\E7R2\E9P, 5331 5332#### NeWS consoles 5333# 5334# Console terminal windows under the NeWS (Sun's Display Postscript windowing 5335# environment). Note: these have nothing to do with Sony's News workstation 5336# line. 5337# 5338 5339# Entry for NeWS's psterm from Eric Messick & Hugh Daniel 5340# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr) 5341psterm|psterm-basic|NeWS psterm-80x34, 5342 OTbs, am, hs, km, ul, 5343 cols#80, it#8, lines#34, 5344 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;, 5345 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY, 5346 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl, 5347 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D, 5348 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr, 5349 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^], 5350 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu, 5351 tsl=\EOl, 5352psterm-96x48|NeWS psterm 96x48, 5353 cols#96, lines#48, use=psterm, 5354psterm-90x28|NeWS psterm 90x28, 5355 cols#90, lines#28, use=psterm, 5356psterm-80x24|NeWS psterm 80x24, 5357 cols#80, lines#24, use=psterm, 5358# This is a faster termcap for psterm. Warning: if you use this termcap, 5359# some control characters you type will do strange things to the screen. 5360# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr) 5361psterm-fast|NeWS psterm fast version (flaky ctrl chars), 5362 OTbs, am, hs, km, ul, 5363 cols#80, it#8, lines#34, 5364 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;, 5365 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y, 5366 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I, 5367 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 5368 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni, 5369 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi, 5370 smso=^Oo, smul=^Ou, tsl=^Ol, 5371 5372#### NeXT consoles 5373# 5374# Use `glasstty' for the Workspace application 5375# 5376 5377# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995 5378next|NeXT console, 5379 am, xt, 5380 cols#80, it#8, lines#24, 5381 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 5382 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 5383 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 5384 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m, 5385nextshell|NeXT Shell application, 5386 am, 5387 cols#80, 5388 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H, 5389 kcud1=^J, nel=^M^J, 5390 5391#### Sony NEWS workstations 5392# 5393 5394# (news-unk: this had :KB=news: -- esr) 5395news-unk|SONY NEWS vt100 emulator common entry, 5396 OTbs, OTpt, am, xenl, 5397 cols#80, 5398 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, 5399 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 5400 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, 5401 ed=\E[J, el=\E[K, home=\E[H, ht=^I, 5402 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L, 5403 is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD, 5404 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP, 5405 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, 5406 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM, 5407 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 5408 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7, 5409 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 5410# 5411# (news-29: this had :TY=ascii: --esr) 5412news-29, 5413 lines#29, use=news-unk, 5414# (news-29-euc: this had :TY=euc: --esr) 5415news-29-euc, 5416 use=news-29, 5417# (news-29-sjis: this had :TY=sjis: --esr) 5418news-29-sjis, 5419 use=news-29, 5420# 5421# (news-33: this had :TY=ascii: --esr) 5422news-33, 5423 lines#33, use=news-unk, 5424# (news-33-euc: this had :TY=euc: --esr) 5425news-33-euc, 5426 use=news-33, 5427# (news-33-sjis: this had :TY=sjis: --esr) 5428news-33-sjis, 5429 use=news-33, 5430# 5431# (news-42: this had :TY=ascii: --esr) 5432news-42, 5433 lines#42, use=news-unk, 5434# (news-42-euc: this had :TY=euc: --esr) 5435news-42-euc, 5436 use=news-42, 5437# (news-42-sjis: this had :TY=sjis: --esr) 5438news-42-sjis, 5439 use=news-42, 5440# 5441# NEWS-OS old termcap entry 5442# 5443# (news-old-unk: this had :KB=news:TY=sjis: --esr) 5444news-old-unk|SONY NEWS vt100 emulator common entry, 5445 OTbs, OTpt, am, xenl, 5446 cols#80, vt#3, 5447 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, 5448 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 5449 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 5450 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H, 5451 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 5452 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM, 5453 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 5454 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 5455 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 5456# 5457# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr) 5458nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines, 5459 OTbs, 5460 lines#40, 5461 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, 5462 use=news-old-unk, 5463# 5464# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr) 5465nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line, 5466 lines#42, 5467 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8, 5468 use=news-old-unk, 5469# 5470# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr) 5471nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines, 5472 OTbs, 5473 lines#40, 5474 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, 5475 use=news-old-unk, 5476# 5477# (nwp513: this had :DE=^H: and the alias vt100-bm --esr) 5478nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines, 5479 OTbs, 5480 lines#31, 5481 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, 5482 use=news-old-unk, 5483# 5484# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr) 5485# also the alias vt100-bm. 5486nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines, 5487 OTbs, 5488 lines#33, 5489 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8, 5490 use=news-old-unk, 5491# 5492# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr) 5493nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines, 5494 OTbs, 5495 lines#31, 5496 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, 5497 use=news-old-unk, 5498# 5499# (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr) 5500news28|sony vt100 emulator 28 lines, 5501 OTbs, 5502 lines#28, 5503 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8, 5504 use=news-old-unk, 5505# 5506# (news29: this had :TY=ascii:KB=nws1200:\ --esr) 5507news29|news28-a|sony vt100 emulator 29 lines, 5508 lines#29, 5509 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8, 5510 use=news-old-unk, 5511# 5512# (news511: this had :TY=sjis: --esr) 5513nwp511|nwp-511|nwp-511 vt100, 5514 OTbs, OTpt, am, xenl, 5515 cols#80, lines#24, 5516 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 5517 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M, 5518 ed=\E[J$<30/>, el=\E[K$<3/>, 5519 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, 5520 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D, 5521 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, 5522 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H, 5523 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 5524 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h, 5525 smso=\E[7m$<2/>, smul=\E[4m$<2/>, 5526# (news517: this had :TY=sjis:. --esr) 5527nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows, 5528 eslok, hs, 5529 cols#80, lines#30, 5530 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, 5531 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 5532 tsl=\E[1$}\E[;%df, use=vt200, 5533# (news517-w: this had :TY=sjis:. --esr) 5534nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows, 5535 eslok, hs, 5536 cols#132, lines#50, 5537 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, 5538 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, 5539 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, 5540 tsl=\E[1$}\E[;%df, use=vt200, 5541 5542#### Common Desktop Environment 5543# 5544 5545# This ships with Sun's CDE in Solaris 2.5 5546# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net> 5547dtterm|CDE desktop terminal, 5548 am, mir, msgr, xenl, xon, 5549 cols#80, it#8, lines#24, lm#0, ncv@, 5550 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5551 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 5552 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 5553 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5554 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 5555 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5556 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 5557 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 5558 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H, 5559 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 5560 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l, 5561 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5562 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 5563 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 5564 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 5565 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 5566 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5567 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 5568 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 5569 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m, 5570 sc=\E7, 5571 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 5572 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 5573 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color, 5574 5575#### Non-Unix Consoles 5576# 5577 5578#### EMX termcap.dat compatibility modes 5579# 5580# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the 5581# no_color_video to inform the application that standout(1), underline(2) 5582# reverse(4) and invisible(64) don't work with color. 5583emx-base|DOS special keys, 5584 bce, bw, 5585 it#8, ncv#71, 5586 bel=^G, use=ansi.sys, 5587 5588# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b, 5589# a Unix-style environment used on OS/2. (Note that the suffix makes some 5590# names longer than 14 characters, the nominal maximum). 5591# 5592# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs. 5593ansi-emx|ANSI.SYS color, 5594 am, bce, eo, mir, msgr, xon, 5595 colors#8, cols#80, it#8, lines#25, pairs#64, 5596 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 5597 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, 5598 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 5599 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, 5600 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J, 5601 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J, 5602 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m, 5603 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec, 5604 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5605 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m, 5606 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c, 5607 u9=\E[c, use=emx-base, 5608# nice colors for Emacs (white on blue, mode line white on cyan) 5609ansi-color-2-emx|ANSI.SYS color 2, 5610 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m, 5611 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec, 5612 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m, 5613 smul=\E[1;36;44m, use=ansi-emx, 5614# nice colors for Emacs (white on black, mode line black on cyan) 5615ansi-color-3-emx|ANSI.SYS color 3, 5616 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m, 5617 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec, 5618 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m, 5619 smul=\E[0;36;40m, use=ansi-emx, 5620mono-emx|stupid monochrome ansi terminal with only one kind of emphasis, 5621 am, 5622 cols#80, it#8, lines#24, 5623 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 5624 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 5625 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, 5626 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, 5627 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, 5628 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m, 5629 sgr0=\E[0m, 5630 5631# Use this for cygwin32 (tested with beta 19.1) 5632# underline is colored bright magenta 5633# shifted kf1-kf12 are kf11-kf22 5634cygwinB19|ansi emulation for cygwin32, 5635 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5636 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 5637 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 5638 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 5639 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 5640 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5641 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@, 5642 use=ansi.sys, 5643 5644# Use this for cygwin (tested with version 1.1.0). 5645# I've combined pcansi and linux. Some values of course were different and 5646# I've indicated which of these were and which I used. 5647# Cheers, earnie_boyd@yahoo.com 5648# several changes based on running with tack and comparing with older entry -TD 5649# more changes from csw: 5650# add cbt [backtab] 5651# remove eo [erase overstrike with blank] 5652# change clear was \E[H\E[J now \E[2J (faster?) 5653# remove cols 5654# remove lines 5655# remove ncv#3 [colors collide with highlights, bitmask] not applicable 5656# to MSDOS box? 5657# add cub [cursor back param] 5658# add cuf [cursor forward param] 5659# add cuu [cursor up param] 5660# add cud [cursor down param] 5661# add hs [has status line] 5662# add fsl [return from status line] 5663# add tsl [go to status line] 5664# add smacs [Start alt charset] (not sure if this works) 5665# add rmacs [End alt charset] (ditto) 5666# add smcup [enter_ca_mode] (save console; thanks Corinna) 5667# add rmcup [exit_ca_mode] (restore console; thanks Corinna) 5668# add kb2 [center of keypad] 5669# add u8 [user string 8] \E[?6c 5670# add el [clear to end of line] \E[K 5671# Notes: 5672# cnorm [make cursor normal] not implemented 5673# flash [flash] not implemented 5674# blink [blink] not implemented very usefully in cygwin? \E[5m 5675# dim [dim] not implemented very usefully in cygwin? \E[2m 5676# cub1 [cursor back 1] typically \E[D, but ^H is faster? 5677# kNXT [shifted next key] not implemented 5678# kPRV [shifted prev key] not implemented 5679# khome [home key] really is \E[1~ NOT \E[H 5680# tbc [clear tab stops] not implemented 5681# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni 5682# smpch [Start PC charset] is \E[11m, same as smacs 5683# rmpch [End PC charset] is \E[10m, same as rmacs 5684# mir [move in insert mode] fails in tack? 5685# bce [back color erase] causes problems with change background color? 5686# cvvis [make cursor very visible] causes a stackdump when testing with 5687# testcurs using the output option? \E[?25h\E[?8c 5688# civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c 5689# ech [erase characters param] broken \E[%p1%dX 5690# kcbt [back-tab key] not implemented in cygwin? \E[Z 5691# 5692# 2005/11/12 -TD 5693# Remove cbt since it does not work in current cygwin 5694# Add 'mir' and 'in' flags based on tack 5695cygwin|ansi emulation for Cygwin, 5696 am, hs, mir, msgr, xon, 5697 colors#8, it#8, pairs#64, 5698 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 5699 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, 5700 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 5701 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 5702 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 5703 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H, 5704 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 5705 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G, 5706 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5707 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 5708 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 5709 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 5710 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 5711 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5712 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, 5713 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, 5714 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 5715 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, 5716 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5717 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 5718 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h, 5719 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];, 5720 vpa=\E[%i%p1%dd, use=vt102+enq, 5721 5722# I've supplied this so that you can help test new values and add other 5723# features. Cheers, earnie_boyd@yahoo.com. 5724# 5725# Some features are from pcansi. The op value is from linux. Function-keys 5726# are from linux. These have been tested not to cause problems. xenl was in 5727# this list, but DOES cause problems so it has been removed 5728cygwinDBG|Debug Version for Cygwin, 5729 am, eo, mir, msgr, xon, 5730 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, 5731 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 5732 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 5733 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D, 5734 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 5735 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5736 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 5737 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 5738 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG, 5739 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 5740 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$, 5741 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 5742 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, 5743 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 5744 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 5745 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, 5746 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 5747 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 5748 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m, 5749 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l, 5750 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, 5751 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5752 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 5753 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m, 5754 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq, 5755 5756# Key definitions: 5757# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the 5758# encodings used by other x86 environments. All others are invented for DJGPP. 5759# Oddly enough, while several combinations of modifiers are tabulated, there is 5760# none for shifted cursor keys. 5761# 5762# F1 \E[[A 5763# F2 \E[[B 5764# F3 \E[[C 5765# F4 \E[[D 5766# F5 \E[[E 5767# F6 \E[17~ 5768# F7 \E[18~ 5769# F8 \E[19~ 5770# F9 \E[20~ 5771# F10 \E[21~ 5772# F11 \E[23~ 5773# F12 \E[24~ 5774# 5775# Delete \E[3~ 5776# Down Arrow \E[B 5777# End \E[4~ 5778# Home \E[1~ 5779# Insert \E[2~ 5780# Left Arrow \E[D 5781# Page Down \E[6~ 5782# Page Up \E[5~ 5783# Right Arrow \E[C 5784# Up Arrow \E[A 5785# 5786# Shift-F1 \E[25~ 5787# Shift-F2 \E[26~ 5788# Shift-F3 \E[27~ 5789# Shift-F4 \E[28~ 5790# Shift-F5 \E[29~ 5791# Shift-F6 \E[30~ 5792# Shift-F7 \E[31~ 5793# Shift-F8 \E[32~ 5794# Shift-F9 \E[33~ 5795# Shift-F10 \E[34~ 5796# Shift-F11 \E[35~ 5797# Shift-F12 \E[36~ 5798# 5799# Ctrl-F1 \E[47~ 5800# Ctrl-F2 \E[48~ 5801# Ctrl-F3 \E[49~ 5802# Ctrl-F4 \E[50~ 5803# Ctrl-F5 \E[51~ 5804# Ctrl-F6 \E[52~ 5805# Ctrl-F7 \E[53~ 5806# Ctrl-F8 \E[54~ 5807# Ctrl-F9 \E[55~ 5808# Ctrl-F10 \E[56~ 5809# Ctrl-F11 \E[57~ 5810# Ctrl-F12 \E[58~ 5811# 5812# Ctrl-Delete \E[43~ 5813# Ctrl-Down Arrow \E[38~ 5814# Ctrl-End \E[44~ 5815# Ctrl-Home \E[41~ 5816# Ctrl-Insert \E[42~ 5817# Ctrl-Left Arrow \E[39~ 5818# Ctrl-Page Down \E[46~ 5819# Ctrl-Page Up \E[45~ 5820# Ctrl-Right Arrow \E[40~ 5821# Ctrl-Up Arrow \E[37~ 5822# 5823# Alt-F1 \E[59~ 5824# Alt-F2 \E[60~ 5825# Alt-F3 \E[61~ 5826# Alt-F4 \E[62~ 5827# Alt-F5 \E[63~ 5828# Alt-F6 \E[64~ 5829# Alt-F7 \E[65~ 5830# Alt-F8 \E[66~ 5831# Alt-F9 \E[67~ 5832# Alt-F10 \E[68~ 5833# Alt-F11 \E[79~ 5834# Alt-F12 \E[80~ 5835# 5836# Alt-Delete \E[65~ 5837# Alt-Down Arrow \E[60~ 5838# Alt-End \E[66~ 5839# Alt-Home \E[41~ 5840# Alt-Insert \E[64~ 5841# Alt-Left Arrow \E[61~ 5842# Alt-Page Down \E[68~ 5843# Alt-Page Up \E[67~ 5844# Alt-Right Arrow \E[62~ 5845# Alt-Up Arrow \E[59~ 5846# 5847# Also: 5848# Alt-A \E[82~ 5849# Alt-B \E[82~ 5850# Alt-C \E[83~ 5851# Alt-D \E[84~ 5852# Alt-E \E[85~ 5853# Alt-F \E[86~ 5854# Alt-G \E[87~ 5855# Alt-H \E[88~ 5856# Alt-I \E[89~ 5857# Alt-J \E[90~ 5858# Alt-K \E[91~ 5859# Alt-L \E[92~ 5860# Alt-M \E[93~ 5861# Alt-N \E[94~ 5862# Alt-O \E[95~ 5863# Alt-P \E[96~ 5864# Alt-Q \E[97~ 5865# Alt-R \E[98~ 5866# Alt-S \E[99~ 5867# Alt-T \E[100~ 5868# Alt-U \E[101~ 5869# Alt-V \E[102~ 5870# Alt-W \E[103~ 5871# Alt-X \E[104~ 5872# Alt-Y \E[105~ 5873# Alt-Z \E[106~ 5874djgpp|ansi emulation for DJGPP alpha, 5875 am, bce, msgr, xhp, xon, xt, 5876 colors#8, it#8, pairs#64, 5877 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 5878 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, 5879 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H, 5880 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 5881 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5882 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 5883 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 5884 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, 5885 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 5886 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D, 5887 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 5888 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, 5889 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 5890 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5891 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J, 5892 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, 5893 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5894 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m, 5895 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, 5896 5897djgpp203|Entry for DJGPP 2.03, 5898 OTbs, am, 5899 cols#80, it#8, lines#25, 5900 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, 5901 kcud1=^J, nel=^M^J, 5902 5903djgpp204|Entry for DJGPP 2.04, 5904 OTbs, am, AX, 5905 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64, 5906 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, 5907 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, 5908 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 5909 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 5910 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, 5911 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 5912 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 5913 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H, 5914 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5915 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B, 5916 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 5917 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 5918 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m, 5919 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm, 5920 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 5921 5922# This is tested using U/Win's telnet. Scrolling is omitted because it is 5923# buggy. Another odd bug appears when displaying "~" in alternate character 5924# set (the emulator spits out error messages). Compare with att6386 -TD 5925uwin|U/Win 3.2 console, 5926 am, eo, in, msgr, xenl, xon, 5927 colors#8, it#8, ncv#58, pairs#64, 5928 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 5929 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 5930 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J, 5931 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 5932 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX, 5933 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, 5934 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B, 5935 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP, 5936 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR, 5937 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, 5938 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8, 5939 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m, 5940 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, 5941 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, 5942 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m, 5943 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, 5944 5945# This entry fits the Windows NT console when the _POSIX_TERM environment 5946# variable is set to 'on'. While the Windows NT POSIX console is seldom used, 5947# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP 5948# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating 5949# systems is not, and (surprise!) they match very well. 5950# 5951# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up 5952# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only 5953# are the installation instructions a pile of mind-numbing bureaucratese, 5954# but the termcap entry is actually broken and unusable as given; the :do: 5955# capability is misspelled "d". 5956# 5957# To use this, you need to a bunch of environment variables: 5958# 5959# SET _POSIX_TERM=on 5960# SET TERM=ansi 5961# SET TERMCAP=location of termcap file in POSIX file format 5962# which is case-sensitive. 5963# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap 5964# SET TMP=//C/TEMP 5965# 5966# Important note: setting the TMP environment variable in POSIX style renders 5967# it incompatible with a lot of other applications, including Visual C++. So 5968# you should have a separate command window just for vi. All the other 5969# variables may be permanently set in the Control Panel\System applet. 5970# 5971# You can find out more about the restrictions of this facility at 5972# <http://www.nentug.org/unix-to-nt/ntposix.htm>. 5973# 5974# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997 5975ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode, 5976 am, bw, msgr, 5977 cols#80, it#8, lines#25, 5978 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 5979 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 5980 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V, 5981 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m, 5982 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m, 5983# From: jew@venus.sunquest.com 5984# Date: 19 Feb 93 23:41:07 GMT 5985# Here's a combination of ansi and vt100 termcap 5986# entries that works nearly perfectly for me 5987# (Gateway 2000 Handbook and Microsoft Works 3.0): 5988pcmw|PC running Microsoft Works, 5989 am, xenl, 5990 cols#80, it#8, lines#24, vt#3, 5991 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 5992 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, 5993 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, 5994 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, 5995 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, 5996 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 5997 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>, 5998 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100, 5999 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 6000 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 6001 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>, 6002 tbc=\E[3g$<2/>, 6003 6004# From: Federico Bianchi 6005# This is the entry for the OpenNT terminal. 6006# The ntconsole name is for backward compatability. 6007# This is for OpenNT 2.0 and later. 6008# Later OpenNT was renamed to Interix. 6009# 6010# Presently it is distributed by Microsoft as Services For Unix (SFU). 6011# The 3.5 beta contains ncurses 4.2 (that is header files and executables, 6012# the documentation dates from 1.9.9e) -TD 6013 6014interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color, 6015 am, bw, msgr, 6016 colors#8, cols#80, lines#25, ncv#3, pairs#64, 6017 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 6018 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD, 6019 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, 6020 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 6021 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 6022 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 6023 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 6024 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA, 6025 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD, 6026 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI, 6027 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM, 6028 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR, 6029 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV, 6030 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa, 6031 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe, 6032 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj, 6033 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5, 6034 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt, 6035 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy, 6036 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-, 6037 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9, 6038 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J, 6039 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, 6040 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec, 6041 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 6042 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm, 6043 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m, 6044 6045opennt-35|ntconsole-35|OpenNT-term35 compatible with color, 6046 lines#35, use=opennt, 6047 6048opennt-50|ntconsole-50|OpenNT-term50 compatible with color, 6049 lines#50, use=opennt, 6050 6051opennt-60|ntconsole-60|OpenNT-term60 compatible with color, 6052 lines#60, use=opennt, 6053 6054opennt-100|ntconsole-100|OpenNT-term100 compatible with color, 6055 lines#100, use=opennt, 6056 6057# OpenNT wide terminals 6058opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color, 6059 cols#125, use=opennt, 6060 6061opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color, 6062 lines#35, use=opennt-w, 6063 6064opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color, 6065 lines#50, use=opennt-w, 6066 6067opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color, 6068 lines#60, use=opennt-w, 6069 6070opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color, 6071 cols#132, use=opennt, 6072 6073# OpenNT terminals with no smcup/rmcup (names match termcap entries) 6074interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color, 6075 rmcup@, smcup@, use=opennt, 6076 6077opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color, 6078 lines#35, use=opennt-nti, 6079 6080opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color, 6081 lines#50, use=opennt-nti, 6082 6083opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color, 6084 lines#60, use=opennt-nti, 6085 6086opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color, 6087 lines#100, use=opennt-nti, 6088 6089######## COMMON TERMINAL TYPES 6090# 6091# This section describes terminal classes and maker brands that are still 6092# quite common, but have proprietary command sets not blessed by ANSI. 6093# 6094 6095#### Altos 6096# 6097# Altos made a moderately successful line of UNIX boxes. In 1990 they were 6098# bought out by Acer, a major Taiwanese manufacturer of PC-clones. 6099# Acer has a web site at http://www.acer.com. 6100# 6101# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993 6102# His comments suggest they were shipped with the system. 6103# 6104 6105# (altos2: had extension capabilities 6106# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 6107# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 6108# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 6109# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 6110# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ 6111# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\ 6112# :HL=^AP\r:SP=\E[i:\ 6113# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ 6114# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\ 6115# Comparison with the k* capabilities makes it obvious that the c* things are 6116# shift keys. I have renamed them to keys 32 and up accordingly. Also, 6117# :sr: was given as a boolean-- esr) 6118altos2|alt2|altos-2|altos II, 6119 cols#80, it#8, lines#24, xmc#0, 6120 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C, 6121 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M, 6122 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, 6123 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J, 6124 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r, 6125 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D, 6126 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r, 6127 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, 6128 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, 6129 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, 6130 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 6131 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r, 6132 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 6133 smam=\E[?7h, smso=\E[7m, smul=\E[4m, 6134# (altos3: had extension capabilities 6135# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 6136# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 6137# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 6138# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 6139# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ 6140# :HL=^AP\r:SP=\E[i:\ 6141# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T: 6142altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V, 6143 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2, 6144altos4|alt4|altos-4|altos IV, 6145 use=wy50, 6146# (altos7: had extension capabilities: 6147# :GG#0:GI=\EH8:GF=\EH7:\ 6148# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 6149# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 6150# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 6151# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 6152# Comparison with the k* capabilities makes it obvious that the c* things are 6153# shift keys. I have renamed them to keys 32 and up accordingly. I have 6154# also made this entry relative to adm12 in order to give it an <sgr>. The 6155# <invis> imported by use=adm+sgr may work, let me know. -- esr) 6156altos7|alt7|altos VII, 6157 am, mir, 6158 cols#80, lines#24, xmc#0, 6159 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt, 6160 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6161 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6162 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE, 6163 ind=^J, invis=\EG1, 6164 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r, 6165 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H, 6166 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r, 6167 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, 6168 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, 6169 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, 6170 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 6171 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r, 6172 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej, 6173 rmir=\Er, smir=\Eq, use=adm+sgr, 6174altos7pc|alt7pc|altos PC VII, 6175 kend=\ET, use=altos7, 6176 6177#### Hewlett-Packard (hp) 6178# 6179# Hewlett-Packard 6180# 8000 Foothills Blvd 6181# Roseville, CA 95747 6182# Vox: 1-(916)-785-4363 (Technical response line for VDTs) 6183# 1-(800)-633-3600 (General customer support) 6184# 6185# 6186# As of March 1998, HP no longer has any terminals in production. 6187# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being 6188# supported (they still have parts). So are the 2392a and 2394a. 6189# See the WORKSTATION CONSOLES section for the 700s. 6190# 6191 6192# Generic HP terminal - this should (hopefully) work on any HP terminal. 6193hpgeneric|hp|hewlett-packard generic terminal, 6194 OTbs, OTpt, am, da, db, mir, xhp, 6195 cols#80, lines#24, lm#0, vt#6, 6196 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 6197 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM, 6198 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, 6199 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@, 6200 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3, 6201 vpa=\E&a%p1%dY, 6202 6203hp110|hewlett-packard model 110 portable, 6204 lines#16, use=hpgeneric, 6205 6206hp+pfk+cr|hp function keys with CR, 6207 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, 6208 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, 6209 6210hp+pfk-cr|hp function keys w/o CR, 6211 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, 6212 kf8=\Ew, 6213 6214# The hp2621s use the same keys for the arrows and function keys, 6215# but not separate escape sequences. These definitions allow the 6216# user to use those keys as arrow keys rather than as function 6217# keys. 6218hp+pfk+arrows|hp alternate arrow definitions, 6219 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@, 6220 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r, 6221 kll=\Eq\r, kri=\Es\r, 6222 6223hp+arrows|hp arrow definitions, 6224 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 6225 kind=\ES, kll=\EF, kri=\ET, 6226 6227# Generic stuff from the HP 262x series 6228# 6229hp262x|HP 262x terminals, 6230 xhp, 6231 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES, 6232 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 6233 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, 6234 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET, 6235 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, 6236 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c, 6237 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, 6238 6239# Note: no <home> on HPs since that homes to top of memory, not screen. 6240# Due to severe 2621 braindamage, the only way to get the arrow keys to 6241# transmit anything at all is to turn on the function key labels 6242# with <smkx>, and even then the user has to hold down shift! 6243# The default 2621 turns off the labels except when it has to to 6244# enable the function keys. If your installation prefers labels 6245# on all the time, or off all the time (at the "expense" of the 6246# function keys), use 2621-nl or 2621-wl. 6247# 6248# Note: there are newer ROMs for 2621's that allow you to set 6249# strap A so the regular arrow keys xmit \EA, etc, as with the 6250# 2645. However, even with this strap set, the terminal stops 6251# xmitting if you reset it, until you unset and reset the strap! 6252# Since there is no way to set/unset the strap with an escape 6253# sequence, we don't use it in the default. 6254# If you like, you can use 2621-ba (brain-damaged arrow keys). 6255hp2621-ba|2621 w/new rom and strap A set, 6256 rmkx@, smkx@, use=hp+arrows, use=hp2621, 6257 6258# hp2621 with function labels. Most of the time they are off, 6259# but inside vi, the function key labels appear. You have to 6260# hold down shift to get them to xmit. 6261hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels, 6262 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl, 6263hp2621-fl|hp 2621, 6264 xhp@, xon, 6265 pb#19200, 6266 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>, 6267 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@, 6268 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD, 6269 use=hp+pfk+cr, use=hpgeneric, 6270 6271# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p 6272hp2621p|hp 2621 with printer, 6273 mc4=\E&p13C, mc5=\E&p11C, use=hp2621, 6274 6275hp2621p-a|hp2621p with fn as arrows, 6276 use=hp+pfk+arrows, use=hp2621p, 6277 6278# hp2621 with k45 keyboard 6279hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard, 6280 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 6281 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621, 6282 6283# 2621 using all 48 lines of memory, only 24 visible at any time. 6284hp2621-48|48 line 2621, 6285 lines#48, 6286 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR, 6287 use=hp2621, 6288 6289# 2621 with no labels ever. Also prevents vi delays on escape. 6290hp2621-nl|hp 2621 with no labels, 6291 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@, 6292 use=hp2621-fl, 6293 6294# Needed for UCB ARPAVAX console, since lsi-11 expands tabs 6295# (wrong). 6296# 6297hp2621-nt|hp 2621 w/no tabs, 6298 ht@, use=hp2621, 6299 6300# Hp 2624 B with 4 or 10 pages of memory. 6301# 6302# Some assumptions are made with this entry. These settings are 6303# NOT set up by the initialization strings. 6304# 6305# Port Configuration 6306# RecvPace=Xon/Xoff 6307# XmitPace=Xon/Xoff 6308# StripNulDel=Yes 6309# 6310# Terminal Configuration 6311# InhHndShk=Yes 6312# InhDC2=Yes 6313# XmitFnctn(A)=No 6314# InhEolWrp=No 6315# 6316# Note: the 2624 DOES have a true <home>, believe it or not! 6317# 6318# The 2624 has an "error line" to which messages can be sent. 6319# This is CLOSE to what is expected for a "status line". However, 6320# after a message is sent to the "error line", the next carriage 6321# return is EATEN and the "error line" is turned back off again! 6322# So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>. 6323# 6324# This entry supports emacs (and any other program that uses raw 6325# mode) at 4800 baud and less. I couldn't get the padding right 6326# for 9600. 6327# 6328# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr) 6329hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B, 6330 da, db, 6331 lm#96, 6332 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, 6333 use=hp+labels, use=scrhp, 6334 6335# This hp2626 entry does not use any of the fancy windowing stuff 6336# of the 2626. 6337# 6338# Indeed, terminfo does not yet handle such stuff. Since changing 6339# any window clears memory, it is probably not possible to use 6340# this for screen opt. 6341# 6342# ed is incredibly slow most of the time - I am guessing at the 6343# exact padding. Since the terminal uses xoff/xon this is intended 6344# only for cost computation, so that the terminal will prefer el 6345# or even dl1 which is probably faster! 6346# 6347# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only 6348# extra slow on the last line of the window. 6349# 6350# The padding probably should be changed. 6351# 6352hp2626|hp2626a|hp2626p|hp 2626, 6353 da, db, 6354 lm#0, pb#19200, 6355 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>, 6356 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr, 6357 use=hp+labels, use=scrhp, 6358 6359# This entry is for sysline. It allocates a 23 line window with 6360# a 115 line workspace for regular use, and a 1 line window for 6361# the status line. 6362# 6363# This assumes port 2 is being used. 6364# Turn off horizontal line, Create ws #1 with 115 lines, 6365# Create ws #2 with 1 line, Create window #1 lines 1-23, 6366# Create window #2 lines 24-24, Attach cursor to workspace #1. 6367# Note that this clears the tabs so it must be done by tset before 6368# it sets the tabs. 6369# 6370hp2626-s|hp 2626 using only 23 lines, 6371 eslok, hs, 6372 lines#23, 6373 fsl=\E&d@\E&w7f2p1I\E&w4f1I, 6374 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r, 6375 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626, 6376# Force terminal back to 24 lines after being 23. 6377hp2626-ns|hp 2626 using all 24 lines, 6378 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r, 6379 use=hp2626, 6380# Various entries useful for small windows on 2626. 6381hp2626-12|hewlett-packard 2626 12 lines, 6382 lines#12, use=hp2626, 6383hp2626-12x40|hewlett-packard 2626 12 lines 40 columns, 6384 cols#40, lines#12, use=hp2626, 6385hp2626-x40|hewlett-packard 2626 40 columns, 6386 cols#40, use=hp2626, 6387hp2626-12-s|hewlett-packard 2626 11 lines plus status, 6388 lines#11, use=hp2626-s, 6389 6390# 6391# hp2627 color tubes from University of Wisconsin 6392# 6393hp2627a-rev|hp 2627 with reverse video colors, 6394 cr=^M, cud1=^J, ht=^I, ind=^J, 6395 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r, 6396 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@, 6397 smul=\E&dD\E&v1S, use=hp2621-nl, 6398hp2627a|hp 2627 color terminal with no labels, 6399 cr=^M, cud1=^J, ht=^I, ind=^J, 6400 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r, 6401 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S, 6402 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S, 6403 use=hp2621-nl, 6404hp2627c|hp 2627 color (cyan) terminal with no labels, 6405 cr=^M, cud1=^J, ht=^I, ind=^J, 6406 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r, 6407 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a, 6408 6409# hp2640a doesn't have the Y cursor addressing feature, and C is 6410# memory relative instead of screen relative, as we need. 6411# 6412hp2640a|hp 2640a, 6413 cup@, rmkx@, smkx@, use=hp2645, 6414 6415hp2640b|hp2644a|hp 264x series, 6416 rmkx@, smkx@, use=hp2645, 6417 6418# (hp2641a: removed unknown :gu: -- esr) 6419hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry, 6420 am, da, db, mir, xhp, 6421 cols#80, lines#24, 6422 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 6423 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, 6424 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I, 6425 if=/usr/share/tabset/std, il1=\EL, ind=^J, 6426 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 6427 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, 6428 vpa=\E&a%p1%2dY, 6429 6430# This terminal should be used at 4800 baud or less. It needs padding for 6431# plain characters at 9600, I guessed at an appropriate cr delay. It really 6432# wants ^E/^F handshaking, but that doesn't work well even if you write 6433# software to support it. 6434hp2645|hp45|HP 2645 series, 6435 pb#9600, 6436 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED, 6437 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 6438 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, 6439 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB, 6440 rmkx=\E&s0A, 6441 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c, 6442 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric, 6443# You should use this terminal at 4800 baud or less. 6444hp2648|hp2648a|HP 2648a graphics terminal, 6445 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>, 6446 dch1=\EP$<7>, ip=$<5>, use=hp2645, 6447 6448# The HP 150 terminal is a fairly vanilla HP terminal, with the 6449# clreol standout problem. It also has graphics capabilities and 6450# a touch screen, which we don't describe here. 6451hp150|hewlett packard Model 150, 6452 OTbs, use=hp2622, 6453 6454# HP 2382a terminals, "the little ones." They don't have any 6455# alternate character set support and sending out ^N/^O will 6456# leave the screen blank. 6457hp2382a|hp2382|hewlett packard 2382a, 6458 da, db, 6459 lh#1, lm#48, 6460 acsc@, 6461 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, 6462 rmacs@, 6463 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c, 6464 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp, 6465 6466hp2621-a|hp2621a-a|hp2621 with fn as arrows, 6467 use=hp+pfk+arrows, use=hp2621-fl, 6468 6469# newer hewlett packard terminals 6470 6471newhpkeyboard|generic entry for HP extended keyboard, 6472 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 6473 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, 6474 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV, 6475 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A, 6476 use=hp+pfk-cr, 6477 6478newhp|generic entry for new hewlett packard terminals, 6479 am, bw, mir, xhp, xon, 6480 cols#80, lines#24, pb#4800, 6481 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x., 6482 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H, 6483 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH, 6484 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J, 6485 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J, 6486 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s, 6487 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s, 6488 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET, 6489 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg, 6490 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;, 6491 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD, 6492 tbc=\E3, use=newhpkeyboard, 6493 6494memhp|memory relative addressing for new HP ttys, 6495 vt#6, 6496 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR, 6497 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR, 6498 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r, 6499 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp, 6500 6501scrhp|screen relative addressing for new HP ttys, 6502 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC, 6503 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC, 6504 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR, 6505 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA, 6506 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp, 6507 6508# (hp+labels: added label values from a BRL termcap -- esr) 6509hp+labels|"standard" label info for new HP ttys, 6510 lh#2, lw#8, nlab#8, 6511 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, 6512 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, 6513 rmln=\E&j@, smln=\E&jB, 6514 6515hp+printer|"standard" printer info for HP ttys, 6516 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C, 6517 6518 6519# The new hp2621b is kind of a cross between the old 2621 and the 6520# new 262x series of machines. It has dip-switched options. 6521# The firmware has a bug in it such that if you give it a null 6522# length label, the following character is eaten! 6523hp2621b|hp 2621b with old style keyboard, 6524 lh#1, lm#48, lw#8, nlab#8, 6525 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 6526 kind=\ET, kll=\EF, kri=\ES, 6527 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r, 6528 smln=\E&jB, use=hp2621, 6529 6530hp2621b-p|hp 2621b with printer, 6531 use=hp+printer, use=hp2621b, 6532 6533# hp2621b - new 2621b with new extended keyboard 6534# these are closer to the new 26xx series than the other 2621b 6535hp2621b-kx|hp 2621b with extended keyboard, 6536 use=newhpkeyboard, use=hp2621b, 6537 6538hp2621b-kx-p|hp 2621b with new keyboard & printer, 6539 use=hp+printer, use=hp2621b-kx, 6540 6541# Some assumptions are made in the following entries. 6542# These settings are NOT set up by the initialization strings. 6543# 6544# Port Configuration 6545# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes 6546# 6547# Terminal Configuration 6548# InhHndShk(G)=Yes InhDC2(H)=Yes 6549# XmitFnctn(A)=No InhEolWrp=No 6550# 6551# 6552# Hp 2622a & hp2623a display and graphics terminals 6553# 6554hp2622|hp2622a|hp 2622, 6555 da, db, 6556 lm#0, pb#19200, 6557 is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp, 6558 6559# The 2623 is a 2622 with extra graphics hardware. 6560hp2623|hp2623a|hp 2623, 6561 use=hp2622, 6562 6563hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer, 6564 use=hp+printer, use=hp2624, 6565 6566# The hewlett packard B can have an optional extra 6 pages of memory. 6567hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory, 6568 lm#240, use=hp2624, 6569 6570hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer, 6571 lm#240, use=hp2624b-p, 6572 6573# Color manipulations for HP terminals 6574hp+color|hp with colors, 6575 ccc, 6576 colors#16, ncv#17, pairs#7, 6577 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI, 6578 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I, 6579 op=\E&v0S, scp=\E&v%p1%dS, 6580 6581# <is2> sets the screen to be 80 columns wide 6582hp2397a|hp2397|hewlett packard 2397A color terminal, 6583 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color, 6584 6585# HP 700/44 Setup parameters: 6586# Terminal Mode HP-PCterm 6587# Inhibit Auto Wrap NO 6588# Status Line Host Writable 6589# PC Character Set YES 6590# Twenty-Five Line Mode YES 6591# XON/XOFF @128 or 64 (sc) 6592# Keycode Mode NO or YES (sc) 6593# Backspace Key BS or BS/DEL 6594# 6595# <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key; 6596# \E\\? does not turn off keycode mode 6597# <smsc> sets alternate start/stop; keycode on 6598hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode, 6599 am, eo, xenl, xon, 6600 cols#80, lines#25, 6601 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 6602 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H, 6603 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 6604 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 6605 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, 6606 ind=^J, 6607 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\, 6608 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 6609 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, 6610 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, 6611 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~, 6612 kpp=\E[5~, rmam=\E[?7l, 6613 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m, 6614 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, 6615 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m, 6616 smul=\E[4m, xoffc=g, xonc=e, 6617# 6618# (hp2392: copied <rmir> here from hpex -- esr) 6619hp2392|239x series, 6620 cols#80, 6621 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r, 6622 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, 6623 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV, 6624 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY, 6625 use=hpsub, 6626 6627hpsub|hp terminals -- capability subset, 6628 am, da, db, mir, xhp, xon, 6629 lines#24, 6630 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 6631 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, 6632 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, 6633 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB, 6634 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@, 6635 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, 6636 6637# hpex: 6638# May be used for most 24 x 80 hp terminals, 6639# but has no padding added, so may allow runover in some terminals at high 6640# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and 6641# hp98x5 terminal emulators or hp98x6 consoles. 6642# Adds xy-cursor addressing, vertical cursor addressing, home, 6643# last line, and underline capabilities. 6644# 6645# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:", 6646# moved <rmir> here from hpsub -- esr) 6647hpex|hp extended capabilites, 6648 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H, 6649 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ, 6650 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub, 6651 6652# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996 6653hp2|hpex2|hewlett-packard extended capabilities newer version, 6654 am, da, db, mir, xhp, 6655 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0, 6656 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, 6657 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 6658 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 6659 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, 6660 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 6661 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, 6662 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, 6663 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, 6664 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em, 6665 pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 6666 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 6667 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 6668 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A, 6669 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, 6670 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, 6671 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB, 6672 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 6673 6674# HP 236 console 6675# From: <ddavis@ic.berkeley.edu> 6676hp236|hp236 internal terminal emulator, 6677 OTbs, am, 6678 cols#80, lines#24, 6679 clear=\EF, cnorm=\EDE, cub1=^H, 6680 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB, 6681 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI, 6682 sgr0=\ECI, smso=\EBI, 6683 6684# This works on a hp300 console running Utah 4.3 BSD 6685# From: Craig Leres <leres@okeeffe.berkeley.edu> 6686hp300h|HP Catseye console, 6687 OTbs, am, da, db, mir, xhp, 6688 cols#128, lines#51, lm#0, xmc#0, 6689 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, 6690 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 6691 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, 6692 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H, 6693 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 6694 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, 6695 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3, 6696 vpa=\E&a%p1%dY, 6697# From: Greg Couch <gregc@ernie.berkeley.edu> 6698hp9837|hp98720|hp98721|HP 9000/300 workstations, 6699 OTbs, am, da, db, mir, xhp, 6700 cols#128, it#8, lines#46, lm#0, 6701 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB, 6702 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 6703 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 6704 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED, 6705 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 6706 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU, 6707 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@, 6708 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD, 6709 tbc=\E3, vpa=\E&a%p1%dY, 6710# HP 9845 desktop computer from BRL 6711# (hp9845: removed unknown capability :gu: -- esr) 6712hp9845|HP 9845, 6713 OTbs, am, da, db, eo, mir, xhp, 6714 cols#80, lines#21, 6715 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 6716 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, 6717 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL, 6718 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, 6719# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90 6720# (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>; 6721# added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr) 6722hp98550|hp98550a|HP 9000 Series 300 color console, 6723 OTbs, am, da, db, mir, xhp, 6724 cols#128, it#8, lines#49, lm#0, 6725 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR, 6726 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 6727 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH, 6728 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 6729 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds, 6730 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 6731 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, 6732 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 6733 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, 6734 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ, 6735 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, 6736 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ, 6737 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 6738# From: Victor Duchovni <vic@fine.princeton.edu> 6739# (hp700-wy: removed obsolete ":nl=^J:"; 6740# replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr) 6741hp700-wy|HP700/41 emulating wyse30, 6742 OTbs, am, bw, mir, msgr, 6743 cols#80, it#8, lines#24, xmc#1, 6744 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 6745 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6746 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1, 6747 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>, 6748 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI, 6749 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY, 6750 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K, 6751 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>, 6752 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>, 6753 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c, 6754hp70092|hp70092a|hp70092A|HP 700/92, 6755 am, da, db, xhp, 6756 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, 6757 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA, 6758 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, 6759 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, 6760 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I, 6761 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, 6762 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 6763 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, 6764 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, 6765 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, 6766 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER, 6767 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, 6768 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, 6769 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 6770 6771bobcat|sbobcat|HP 9000 model 300 console, 6772 am, da, db, mir, xhp, 6773 cols#128, it#8, lines#47, xmc#0, 6774 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 6775 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP, 6776 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I, 6777 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 6778 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER, 6779 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ, 6780 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>, 6781gator-t|HP 9000 model 237 emulating extra-tall AAA, 6782 lines#94, use=gator, 6783gator|HP 9000 model 237 emulating AAA, 6784 bw, km, mir, ul, 6785 cols#128, it#8, lines#47, 6786 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, 6787 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, 6788 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>, 6789 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, 6790 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>, 6791 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 6792 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m, 6793 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 6794gator-52|HP 9000 model 237 emulating VT52, 6795 cols#128, lines#47, use=vt52, 6796gator-52t|HP 9000 model 237 emulating extra-tall VT52, 6797 lines#94, use=gator-52, 6798 6799#### Honeywell-Bull 6800# 6801# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93 6802# 6803 6804# Honeywell Bull terminal. Its cursor and function keys send single 6805# control characters and it has standout/underline glitch. Most programs 6806# do not like these features/bugs. Visual bell is realized by flashing the 6807# "keyboard locked" LED. 6808dku7003-dumb|Honeywell Bull DKU 7003 dumb mode, 6809 cols#80, lines#25, 6810 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X, 6811 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K, 6812 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y, 6813 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J, 6814dku7003|Honeywell Bull DKU 7003 all features described, 6815 msgr, 6816 xmc#1, 6817 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m, 6818 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 6819 use=dku7003-dumb, 6820 6821#### Lear-Siegler (adm) 6822# 6823# These guys are long since out of the terminals business, but 6824# in 1995 many current terminals still have an adm type as one of their 6825# emulations (usually their stupidest, and usually labeled adm3, though 6826# these `adm3' emulations normally have adm3a+ capabilities). 6827# 6828# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a 6829# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator') 6830# was being held to ground would trigger a send of the top line on the screen. 6831# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22 6832# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>, 6833# for clearing up this point.) 6834 6835adm1a|adm1|lsi adm1a, 6836 am, 6837 cols#80, lines#24, 6838 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6839 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^, 6840 ind=^J, 6841adm2|lsi adm2, 6842 OTbs, am, 6843 cols#80, lines#24, 6844 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6845 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6846 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J, 6847 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 6848# (adm3: removed obsolete ":ma=^K^P:" -- esr) 6849adm3|lsi adm3, 6850 OTbs, am, 6851 cols#80, lines#24, 6852 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J, 6853# The following ADM-3A switch settings are assumed for normal operation: 6854# SPACE U/L_DISP CLR_SCRN 24_LINE 6855# CUR_CTL LC_EN AUTO_NL FDX 6856# Other switches may be set for operator convenience or communication 6857# requirements. I recommend 6858# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF 6859# ETX_OFF EOT_OFF 6860# Most of these terminals required an option ROM to support lower case display. 6861# Open the case and look at the motherboard; if you see an open 24-pin DIP 6862# socket, you may be out of luck. 6863# 6864# (adm3a: some capabilities merged in from BRl entry -- esr) 6865adm3a|lsi adm3a, 6866 OTbs, am, 6867 cols#80, lines#24, 6868 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H, 6869 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 6870 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, 6871 kcuu1=^K, rs2=^N, 6872adm3a+|adm3a plus, 6873 kbs=^H, use=adm3a, 6874# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr) 6875adm5|lsi adm5, 6876 xmc#1, 6877 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^, 6878 rmso=\EG, smso=\EG, use=adm3a+, 6879# A lot of terminals other than adm11s use these. Wherever you see 6880# use=adm+sgr with some of its capabilities disabled, try the 6881# disabled ones. They may well work but not have been documented or 6882# expressed in the using entry. We'd like to cook up an <sgr> but the 6883# <rmacs>/<smacs> sequences of the using entries vary too much. 6884adm+sgr|adm style highlight capabilities, 6885 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0, 6886 smso=\EG4, smul=\EG8, 6887# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL 6888# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs> 6889# <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also 6890# be ^Z, according to his entry. 6891# (adm11: <smul>=\EG4 was obviously erroneous because it also said 6892# <rev>=\EG4. Looking at other ADMs confirms this -- esr) 6893adm11|LSI ADM-11, 6894 OTbs, am, hs, 6895 OTkn#8, cols#80, lines#24, 6896 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H, 6897 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 6898 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I, 6899 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, 6900 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 6901 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E), 6902 use=adm+sgr, 6903# From: Andrew Scott Beals <bandy@lll-crg.ARPA> 6904# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995 6905# Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996 6906# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had 6907# <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost> 6908# via BRL. That entry asserted <xmc#1>, but I've left that out because 6909# neither earlier nor later ADMSs have it -- esr) 6910# 6911# You will need to get into the supervisor setup before you can set 6912# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should 6913# see a lot more setup options. 6914# 6915# While in supervisor setup you can also use following codes: 6916# 6917# Ctrl-P Personality character selections (configure for example what 6918# arrow keys send, if I recall correctly) 6919# Ctrl-T tabs 1-80 use left&right to move and up to set and 6920# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor 6921# Ctrl-B Binary setup (probably not needed. I think that everything can 6922# be set using normal setup) 6923# Ctrl-A Answerback mode (enter answerback message) 6924# Ctrl-U User friendly mode (normal setup) 6925# Ctrl-D Defaults entire setup and function keys from EPROM tables 6926# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds. 6927# Ctrl-R Reads both setup and functions keys from NVM. 6928# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status 6929# 6930# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to 6931# RTS/CTS used nowadays with virtually every modem and computer. 19200 6932# bps works fine with hardware flow control. 6933# 6934# The following null-modem cable should fix this and enable you to use 6935# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also 6936# set ADM-12+ for DTR handshaking from supervisor setup. 6937# 6938# PC Serial ADM-12+ 6939# -------- ------- 6940# 2 - 3 6941# 3 - 2 6942# 4 - 5 6943# 5 - 20 6944# 6,8 - 4 6945# 7 - 7 6946# 20 - 6,8 6947# 6948adm12|lsi adm12, 6949 OTbs, OTpt, am, mir, 6950 OTug#1, cols#80, it#8, lines#24, 6951 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6952 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6953 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, 6954 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1, 6955 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 6956 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 6957 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0, 6958 use=adm+sgr, 6959# (adm20: removed obsolete ":kn#7:" -- esr) 6960adm20|lear siegler adm20, 6961 OTbs, am, 6962 cols#80, it#8, lines#24, 6963 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L, 6964 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW, 6965 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE, 6966 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(, 6967 sgr0=\E(, smso=\E), 6968adm21|lear siegler adm21, 6969 xmc#1, 6970 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET, 6971 ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H, 6972 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr, 6973 use=adm3a, 6974# (adm22: ":em=:" was an obvious typo for ":ei=:"; also, 6975# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :"; 6976# removed bogus-looking \200 from before <cup>. -- esr) 6977adm22|lsi adm22, 6978 OTbs, am, 6979 cols#80, lines#24, 6980 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6981 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6982 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE, 6983 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0, 6984 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, 6985 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 6986 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 6987 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E), 6988# ADM 31 DIP Switches 6989# 6990# This information comes from two versions of the manual for the 6991# Lear-Siegler ADM 31. 6992# 6993# Main board: 6994# rear of case 6995# +-||||-------------------------------------+ 6996# + S1S2 ||S + 6997# + ||3 + 6998# + + 6999# + ||S + 7000# + ||4 + 7001# + + 7002# + + 7003# + + 7004# + + 7005# + + 7006# +-+ +-+ 7007# + + 7008# + S5 S6 S7 + 7009# + == == == + 7010# +----------------------------------------------+ 7011# front of case (keyboard) 7012# 7013# S1 - Data Rate - Modem 7014# S2 - Data Rate - Printer 7015# ------------------------ 7016# Data Rate Setting 7017# ------------------- 7018# 50 0 0 0 0 7019# 75 1 0 0 0 7020# 110 0 1 0 0 7021# 134.5 1 1 0 0 7022# 150 0 0 1 0 7023# 300 1 0 1 0 7024# 600 0 1 1 0 7025# 1200 1 1 1 0 7026# 1800 0 0 0 1 7027# 2000 1 0 0 1 7028# 2400 0 1 0 1 7029# 3600 1 1 0 1 7030# 4800 0 0 1 1 7031# 7200 1 0 1 1 7032# 9600 0 1 1 1 7033# x 1 1 1 1 7034# 7035# S3 - Interface/Printer/Attributes 7036# --------------------------------- 7037# Printer Busy Control 7038# sw1 sw2 sw3 7039# --------------- 7040# off off off Busy not active, CD disabled 7041# off off on Busy not active, CD enabled 7042# off on off Busy active on J5-20, CD disabled 7043# on off off Busy active on J5-19, CD disabled - Factory Set. 7044# on off on Busy active on J5-19, CD enabled 7045# 7046# sw4 Used in conjuction with S4 for comm interface control - Fact 0 7047# 7048# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0 7049# 7050# sw6 ON enables printer BUSY active LOW - Factory Setting 7051# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses 7052# 7053# sw7 ON - steady cursor - Factory Setting 7054# OFF - blinking cursor 7055# 7056# sw8 ON causes selected attribute character to be displayed 7057# OFF causes SPACE to be displayed instead - Factory Setting 7058# 7059# S4 - Interface 7060# -------------- 7061# Modem Interface 7062# S3 S4 S4 S4 S4 7063# sw4 sw1 sw2 sw3 sw4 7064# --------------------------- 7065# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and 7066# Current Loop disabled - Factory Setting 7067# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect 7068# disabled 7069# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and 7070# Current Loop Disabled 7071# 7072# sw5 ON disables dot stretching mode - Factory Setting 7073# OFF enables dot stretching mode 7074# sw6 ON enables blanking function 7075# OFF enables underline function - Factory Setting 7076# sw7 ON causes NULLS to be displayed as NULLS 7077# OFF causes NULLS to be displayed as SPACES - Factory Setting 7078# 7079# S5 - Word Structure 7080# ------------------- 7081# sw1 ON enables BREAK key - Factory Setting 7082# OFF disables BREAK key 7083# sw2 ON selects 50Hz monitor refresh rate 7084# OFF selects 60Hz monitor refresh rate - Factory Setting 7085# 7086# Modem Port Selection 7087# sw3 sw4 sw5 7088# --------------- 7089# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits 7090# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits 7091# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set. 7092# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit 7093# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits 7094# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit 7095# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit 7096# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit 7097# 7098# sw6 ON sends bit 8 a 1 (mark) 7099# OFF sends bit 8 as 0 (space) - Factory Setting 7100# sw7 ON selects Block Mode 7101# OFF selects Conversation Mode - Factory Setting 7102# sw8 ON selects Full Duplex operation 7103# OFF selects Half Duplex operation - Factory Setting 7104# 7105# S6 - Printer 7106# ------------ 7107# sw1, sw2, sw6, sw7 Reserved - Factory 0 7108# 7109# Printer Port Selection 7110# same as Modem above, bit 8 (when 8 DATA bits) is always = 0 7111# 7112# sw8 ON enables Printer Port 7113# OFF disables Printer Port - Factory Setting 7114# 7115# S7 - Polling Address 7116# -------------------- 7117# sw1-7 Establish ASCII character which designates terminal polling address 7118# ON = logic 0 7119# OFF = logic 1 - Factory Setting 7120# sw8 ON enables Polling Option 7121# OFF disables Polling Option - Factory Setting 7122# 7123# 7124# On some older adm31s, S4 does not exist, and S5-sw6 is not defined. 7125# 7126# This adm31 entry uses underline as the standout mode. 7127# If the adm31 gives you trouble with standout mode, check the DIP switch in 7128# position 6, bank @c11, 25% from back end of the circuit board. Should be 7129# OFF. If there is no such switch, you have an old adm31 and must use oadm31. 7130# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr) 7131adm31|lsi adm31 with sw6 set for underline mode, 7132 OTbs, am, mir, 7133 cols#80, lines#24, 7134 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7135 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 7136 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0, 7137 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 7138 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 7139 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0, 7140 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1, 7141adm31-old|o31|old adm31, 7142 rmul@, smso=\EG4, smul@, use=adm31, 7143# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL 7144adm36|LSI ADM36, 7145 OTbs, OTpt, 7146 OTkn#4, 7147 if=/usr/share/tabset/vt100, 7148 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, 7149 use=vt100, 7150# (adm42: removed obsolete ":ma=^K^P:" -- esr) 7151adm42|lsi adm42, 7152 OTbs, am, 7153 cols#80, lines#24, 7154 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7155 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 7156 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I, 7157 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J, 7158 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@, 7159 smir=\Eq, smul@, use=adm+sgr, 7160# The following termcap for the Lear Siegler ADM-42 leaves the 7161# "system line" at the bottom of the screen blank (for those who 7162# find it distracting otherwise) 7163adm42-ns|lsi adm-42 with no system line, 7164 cbt=\EI\EF \011, clear=\E;\EF \011, 7165 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011, 7166 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011, 7167 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011, 7168 smir=\Eq\EF \011, use=adm42, 7169# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985. 7170# The insert mode of this terminal is commented out because it's broken for our 7171# purposes in that it will shift the position of every character on the page, 7172# not just the cursor line! 7173# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996 7174adm1178|1178|lsi adm1178, 7175 am, 7176 cols#80, lines#24, xmc#1, 7177 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, 7178 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 7179 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, 7180 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H, 7181 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0, 7182 sgr0=\E), smso=\EG4, smul=\EG1, 7183 7184#### Prime 7185# 7186# Yes, Prime made terminals. These entries were posted by Kevin J. Cummings 7187# <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr. 7188# Prime merged with ComputerVision in the late 1980s; you can reach them at: 7189# 7190# ComputerVision Services 7191# 500 Old Connecticut Path 7192# Framingham, Mass. 7193# 7194 7195# Standout mode is dim reverse-video. 7196pt100|pt200|wren|fenix|prime pt100/pt200, 7197 am, bw, mir, msgr, 7198 cols#80, it#8, lines#24, 7199 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H, 7200 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, 7201 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA, 7202 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M, 7203 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P, 7204 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D, 7205 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J, 7206 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m, 7207 sgr0=\E[m, 7208 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q, 7209 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m, 7210pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode, 7211 cols#132, 7212 cup=\E[%i%p1%d;%p2%dH, use=pt100, 7213pt250|Prime PT250, 7214 rmso@, smso@, use=pt100, 7215pt250w|Prime PT250 in 132-column mode, 7216 rmso@, smso@, use=pt100w, 7217 7218#### Qume (qvt) 7219# 7220# Qume, Inc. 7221# 3475-A North 1st Street 7222# San Jose CA 95134 7223# Vox: (800)-457-4447 7224# Fax: (408)-473-1510 7225# Net: josed@techsupp.wyse.com (Jose D'Oliveira) 7226# 7227# Qume was bought by Wyse, but still (as of early 1995) has its own support 7228# group and production division. 7229# 7230# Discontinued Qume models: 7231# 7232# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+ 7233# built to replace them, and a qvt119+ which was a 101+ with available wide 7234# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations 7235# and an ANSI-compatible qvt203 that replaced it. Qume started producing 7236# ANSI-compatible terminals with the qvt323 and qvt61. 7237# 7238# Current Qume models (as of February 1995): 7239# 7240# All current Qume terminals have ANSI-compatible operation modes. 7241# Qume is still producing the qvt62, which features emulations for other 7242# popular lines such as ADDS, and dual-host capabilities. The qvt82 is 7243# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal 7244# with many emulations including Wyse370, Wyse 325, etc. Their newest 7245# model is the qvt520, which is vt420-compatible. 7246# 7247# There are some ancient printing Qume terminals under `Daisy Wheel Printers' 7248# 7249# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its 7250# setup mode. Shift-s should be a configuration save to NVRAM. 7251 7252qvt101|qvt108|qume qvt 101 and QVT 108, 7253 xmc#1, use=qvt101+, 7254 7255# This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap 7256# file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked 7257# both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E). 7258# What seems to be going on here is that this entry was designed so that 7259# the normal highlight is bold and standout is dim plus something else 7260# (reverse-video maybe? But then, are there two <rev> sequences?) 7261qvt101+|qvt101p|qume qvt 101 PLUS product, 7262 am, bw, hs, ul, 7263 cols#80, lines#24, xmc#0, 7264 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J, 7265 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 7266 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET, 7267 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, 7268 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H, 7269 kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET, 7270 kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, 7271 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 7272 khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(, 7273 smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, 7274qvt102|qume qvt 102, 7275 cnorm=\E., use=qvt101, 7276# (qvt103: added <rmam>/<smam> based on init string -- esr) 7277qvt103|qume qvt 103, 7278 am, xenl, xon, 7279 cols#80, it#8, lines#24, vt#3, 7280 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 7281 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 7282 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 7283 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 7284 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 7285 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 7286 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 7287 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, 7288 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>, 7289 rmso=\E[m$<2>, rmul=\E[m$<2>, 7290 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 7291 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>, 7292 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=, 7293 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 7294qvt103-w|qume qvt103 132 cols, 7295 cols#132, lines#24, 7296 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103, 7297qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals, 7298 am, hs, mir, msgr, 7299 cols#80, lines#24, xmc#0, 7300 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H, 7301 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 7302 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, 7303 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I, 7304 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX, 7305 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, 7306 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 7307 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 7308 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8, 7309 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, 7310qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines, 7311 lines#25, use=qvt119+, 7312qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode, 7313 cols#132, 7314 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+, 7315qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25, 7316 lines#25, use=qvt119+, 7317qvt203|qvt203+|qume qvt 203 Plus, 7318 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, 7319 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, 7320 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 7321 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103, 7322qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video), 7323 cols#132, lines#24, 7324 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203, 7325# 7326# Since a command is present for enabling 25 data lines, 7327# a specific terminfo entry may be generated for the 203. 7328# If one is desired for the QVT 119 PLUS then 25 lines must 7329# be selected in the status line (setup line 9). 7330# 7331qvt203-25|QVT 203 PLUS with 25 by 80 column mode, 7332 cols#80, lines#25, 7333 is2=\E[=40h\E[?3l, use=qvt203, 7334qvt203-25-w|QVT 203 PLUS with 25 by 132 columns, 7335 cols#132, lines#25, 7336 rs2=\E[?3h\E[=40h, use=qvt203, 7337 7338#### Televideo (tvi) 7339# 7340# TeleVideo 7341# 550 East Brokaw Road 7342# PO Box 49048 95161 7343# San Jose CA 95112 7344# Vox: (408)-954-8333 7345# Fax: (408)-954-0623 7346# 7347# 7348# These require incredible amounts of padding. 7349# 7350# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer 7351# Televideo terminals are ANSI and PC-ANSI compatible. 7352 7353tvi803|televideo 803, 7354 clear=\E*$<10>, use=tvi950, 7355 7356# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86 7357# Switch settings are: 7358# 7359# S1 1 2 3 4 7360# D D D D 9600 7361# D D D U 50 7362# D D U D 75 7363# D D U U 110 7364# D U D D 135 7365# D U D U 150 7366# D U U D 300 7367# D U U U 600 7368# U D D D 1200 7369# U D D U 1800 7370# U D U D 2400 7371# U D U U 3600 7372# U U D D 4800 7373# U U D U 7200 7374# U U U D 9600 7375# U U U U 19200 7376# 7377# S1 5 6 7 8 7378# U D X D 7N1 (data bits, parity, stop bits) (X means ignored) 7379# U D X U 7N2 7380# U U D D 7O1 7381# U U D U 7O2 7382# U U U D 7E1 7383# U U U U 7E2 7384# D D X D 8N1 7385# D D X U 8N2 7386# D U D D 8O1 7387# D U U U 8E2 7388# 7389# S1 9 Autowrap 7390# U on 7391# D off 7392# 7393# S1 10 CR/LF 7394# U do CR/LF when CR received 7395# D do CR when CR received 7396# 7397# S2 1 Mode 7398# U block 7399# D conversational 7400# 7401# S2 2 Duplex 7402# U half 7403# D full 7404# 7405# S2 3 Hertz 7406# U 50 7407# D 60 7408# 7409# S2 4 Edit mode 7410# U local 7411# D duplex 7412# 7413# S2 5 Cursor type 7414# U underline 7415# D block 7416# 7417# S2 6 Cursor down key 7418# U send ^J 7419# D send ^V 7420# 7421# S2 7 Screen colour 7422# U green on black 7423# D black on green 7424# 7425# S2 8 DSR status (pin 6) 7426# U disconnected 7427# D connected 7428# 7429# S2 9 DCD status (pin 8) 7430# U disconnected 7431# D duplex 7432# 7433# S2 10 DTR status (pin 20) 7434# U disconnected 7435# D duplex 7436# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>, 7437# <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr) 7438tvi910|televideo model 910, 7439 OTbs, am, msgr, 7440 cols#80, it#8, lines#24, xmc#1, 7441 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7442 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, 7443 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I, 7444 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H, 7445 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, 7446 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 7447 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 7448 vpa=\E[%p1%{32}%+%c, use=adm+sgr, 7449# From: Alan R. Rogers <rogers%albany@csnet-relay> 7450# as subsequently hacked over by someone at SCO 7451# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr) 7452# 7453# Here are the 910+'s DIP switches (U = up, D = down, X = don't care): 7454# 7455# S1 1 2 3 4: 7456# D D D D 9600 D D D U 50 D D U D 75 D D U U 110 7457# D U D D 135 D U D U 150 D U U D 300 D U U U 600 7458# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600 7459# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200 7460# 7461# S1 5 6 7 8: 7462# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2 7463# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2 7464# D U D D 8O1 D U U U 8E2 7465# 7466# S1 9 Autowrap (U = on, D = off) 7467# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received) 7468# S2 1 Mode (U = block, D = conversational) 7469# S2 2 Duplex (U = half, D = full) 7470# S2 3 Hertz (U = 50, D = 60) 7471# S2 4 Edit mode (U = local, D = duplex) 7472# S2 5 Cursor type (U = underline, D = block) 7473# S2 6 Cursor down key (U = send ^J, D = send ^V) 7474# S2 7 Screen colour (U = green on black, D = black on green) 7475# S2 8 DSR status (pin 6) (U = disconnected, D = connected) 7476# S2 9 DCD status (pin 8) (U = disconnected, D = connected) 7477# S2 10 DTR status (pin 20) (U = disconnected, D = connected) 7478# 7479tvi910+|televideo 910+, 7480 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>, 7481 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, 7482 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, 7483 ll=\E=7\s, use=tvi910, 7484 7485# (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and 7486# <khome> from BRL entry -- esr) 7487tvi912|tvi914|tvi920|old televideo 912/914/920, 7488 OTbs, OTpt, am, msgr, 7489 cols#80, it#8, lines#24, xmc#1, 7490 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7491 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 7492 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^, 7493 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt, 7494 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, 7495 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 7496 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 7497 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El, 7498 tbc=\E3, 7499# We got some new tvi912c terminals that act really weird on the regular 7500# termcap, so one of our gurus worked this up. Seems that cursor 7501# addressing is broken. 7502tvi912cc|tvi912 at cowell college, 7503 cup@, use=tvi912c, 7504 7505# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C 7506# From: Benjamin C. W. Sittler 7507# 7508# Someone has put a scanned copy of the manual online at: 7509# http://vt100.net/televideo/912b-om/ 7510# 7511# These terminals were produced ca. 1979, and had a 12" monochrome 7512# screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit 7513# ASCII, and were generally similar to adm3a but with attributes 7514# (including some with magic cookies), fancy half-duplex mode, and 7515# different bugs. 7516# 7517# Some operations reqire truly incredible amounts of padding. The 7518# insert_line (<il1>) and delete_line (<dl1>) operations in particular 7519# are so slow as to be nearly unusable. 7520# 7521# There may or may not have been a separate, earlier series of 912/920 7522# terminals (without the "B" and "C" suffix); I have never seen one, 7523# and the manual only describes the "B" and "C" series. The 912 and 920 7524# are quite distinct from the 914 and 924, which were much nicer non- 7525# magic-cookie terminals similar to the 950. 7526# 7527# This is a new description for the following TeleVideo terminals, 7528# distinguished chiefly by their keyboards: 7529# 7530# TVI-912B - very odd layout, no function keys (84 keys) 7531# TVI-920B - typewriter layout, no function keys (103 keys) 7532# TVI-912C - very odd layout, function keys F1-F11 (82 keys) 7533# TVI-920C - typewriter layout, function keys F1-F11 (101 keys) 7534# 7535# To choose a setting for the TERM variable, start with the model: 7536# 7537# Model || base name 7538# ----------||----------- 7539# TVI-912B || tvi912b 7540# TVI-912C || tvi912c 7541# TVI-920B || tvi920b 7542# TVI-920C || tvi920c 7543# 7544# Then add a suffix from the following table describing installed options 7545# and how you'd like to use the terminal: 7546# 7547# Use Video | Second | Visual | Magic | Page || feature 7548# Attributes | Page | Bell | Cookies | Print || suffix 7549# ------------|--------|--------|---------|-------||--------- 7550# No | No | N/A | N/A | No || -unk 7551# No | No | N/A | N/A | Yes || -p 7552# No | Yes | No | N/A | No || -2p-unk 7553# No | Yes | No | N/A | Yes || -2p-p 7554# No | Yes | Yes | N/A | No || -vb-unk 7555# No | Yes | Yes | N/A | Yes || -vb-p 7556# Yes | No | N/A | No | N/A || 7557# Yes | No | N/A | Yes | N/A || -mc 7558# Yes | Yes | No | No | N/A || -2p 7559# Yes | Yes | No | Yes | N/A || -2p-mc 7560# Yes | Yes | Yes | No | N/A || -vb 7561# Yes | Yes | Yes | Yes | N/A || -vb-mc 7562# 7563# So e.g. a model 920 C with second page memory option, visual bell 7564# and no magic cookies would be tvi920c-vb; a model 912 B without the 7565# second page memory option and using magic cookies would be 7566# tvi912b-mc 7567# 7568# PADDING 7569# 7570# At 9600 baud, the terminal is prone to overflow its input buffer 7571# during complex operations (insert/delete 7572# character/line/screen/page), and it does not signal this over the 7573# RS232 cable. The typical symptom of an overrun is that the terminal 7574# starts beeping, and output becomes garbled. 7575# 7576# The padding delays in this terminfo were derived using tack(1) 7577# running on a Linux box connected to a TVI-920C with a later-model 7578# (A49C1-style) ROM running at 9600 baud, so your mileage may 7579# vary. The numbers below seem to give the terminal enough time so 7580# that it doesn't overflow its input buffer and start losing 7581# characters. 7582# 7583# KEYS 7584# 7585# If you want to use the FUNCT key on a tvi912[bc], use the 7586# corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from 7587# the following table (these also work on the 920 series): 7588# 7589# Unshifted Function Keys: 7590# 7591# Key | capname|| Equivalent 7592# -----|--------||------------ 7593# F1 | <kf1> || FUNCT + @ 7594# F2 | <kf2> || FUNCT + A 7595# F3 | <kf3> || FUNCT + B 7596# F4 | <kf4> || FUNCT + C 7597# F5 | <kf5> || FUNCT + D 7598# F6 | <kf6> || FUNCT + E 7599# F7 | <kf7> || FUNCT + F 7600# F8 | <kf8> || FUNCT + G 7601# F9 | <kf9> || FUNCT + H 7602# F10 | <kf10> || FUNCT + I 7603# F11 | <kf11> || FUNCT + J 7604# 7605# Shifted Function Keys: 7606# 7607# SHIFT + Key | capname|| Equivalent 7608# -------------|--------||------------ 7609# SHIFT + F1 | <kf12> || FUNCT + ` 7610# SHIFT + F2 | <kf13> || FUNCT + a 7611# SHIFT + F3 | <kf14> || FUNCT + b 7612# SHIFT + F4 | <kf15> || FUNCT + c 7613# SHIFT + F5 | <kf16> || FUNCT + d 7614# SHIFT + F6 | <kf17> || FUNCT + e 7615# SHIFT + F7 | <kf18> || FUNCT + f 7616# SHIFT + F8 | <kf19> || FUNCT + g 7617# SHIFT + F9 | <kf20> || FUNCT + h 7618# SHIFT + F10 | <kf21> || FUNCT + i 7619# SHIFT + F11 | <kf22> || FUNCT + j 7620# 7621# PORTS AND SWITCH SETTINGS 7622# 7623# Here are the switch settings for the TVI-912B/TVI-920B and 7624# TVI-912C/TVI-920C: 7625# 7626# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down: 7627# 2: 9600 3: 4800 4: 2400 5: 1200 7628# 6: 600 7: 300 8: 150 9: 75 7629# 10: 110 7630# 7631# S2 UART/Terminal options: 7632# Up Down 7633# 1: Not used Not allowed 7634# 2: Alternate character set Standard character set 7635# 3: Full duplex Half duplex 7636# 4: 50 Hz refresh 60 Hz refresh 7637# 5: No parity Send parity 7638# 6: 2 stop bits 1 stop bit 7639# 7: 8 data bits 7 data bits 7640# 8: Not used Not allowed on Rev E or lower 7641# 9: Even parity Odd parity 7642# 10: Steady cursor Blinking cursor 7643# (On Rev E or lower, use W25 instead of switch 10.) 7644# 7645# S5 UART/Terminal options: 7646# Open Closed 7647# 1: P3-6 Not connected DSR received on P3-6 7648# 2: P3-8 Not connected DCD received on P3-8 7649# 7650# 3 Open, 4 Open: P3-20 Not connected 7651# 3 Open, 4 Closed: DTR on when terminal is on 7652# 3 Closed, 4 Open: DTR is connected to RTS 7653# 3 Closed, 4 Closed: Not allowed 7654# 7655# 5 Closed: HDX printer (hardware control) Rev. K with extension port off, 7656# all data transmitted out of the modem port (P3) will also be 7657# transmitted out of the printer port (P4). 7658# 7659# 6 Open, 7 Open: Not allowed 7660# 6 Open, 7 Closed: 20ma current loop input 7661# 6 Closed, 7 Open: RS232 input 7662# 6 Closed, 7 Closed: Not allowed 7663# 7664# Jumper options: 7665# If the jumper is installed, the effect will occur (the next time the terminal 7666# is switched on). 7667# 7668# S4/W31: Enables automatic LF upon receipt of CR from 7669# remote or keyboard. 7670# S4/W32: Enables transmission of EOT at the end of Send. If not 7671# installed, a carriage return is sent. 7672# S4/W33: Disables automatic carriage return in column 80. 7673# S4/W34: Selects Page Print Mode as initial condition. If not 7674# installed, Extension Mode is selected. 7675# 7676# NON-STANDARD CAPABILITIES 7677# 7678# Sending <u9> or <u7> returns a cursor position report in the format 7679# YX\r, where Y and X are as in <cup>. This format is described in 7680# <u8> and <u6>, but it's not clear how one should write an 7681# appropriate scanf string, since we need to subtract %' ' from the 7682# character after reading it. The <u9> capability is used by tack(1) 7683# to synchronize during padding tests, and seems to work for that 7684# purpose. 7685# 7686# This description also includes the obsolete termcap capabilities 7687# has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>). 7688# 7689# FEATURES NOT YET DESCRIBED IN THIS TERMINFO 7690# 7691# The FUNCT modifier actually works with every normal key by sending 7692# ^AX\r, where X is the sequence normally sent by that key. This is a 7693# sort of meta key not currently describable in terminfo. 7694# 7695# There are quite a few other keys (especially on the 920 models,) but 7696# they are for the most part only useful in block mode. 7697# 7698# These terminals have lots of forms manipulation features, mainly 7699# useful in block mode, including "clear X to nulls" (vs. "clear X to 7700# spaces"; nulls are sentinels for "send X" operations); "send X" 7701# operations for uploading all or part of the screen; and block-mode 7702# editing keys (they don't send escape sequences, but manipulate video 7703# memory directly). Block mode is used for local editing, and protect 7704# mode (in conjunction with the "write protect" attribute, 7705# a.k.a. half-intensity outside of protect mode) is used to control 7706# which parts of the screen are edited/sent/printed (by <mc0>). 7707# 7708# There are at least two major families of ROM, "early" and 7709# A49B1/A49C1; the major difference seems to be that the latter ROMs 7710# support a few extra escape sequences for manipulating the off-screen 7711# memory page, and for sending whole pages back to the host (mainly 7712# useful in block mode.) The descriptions in this file don't use any 7713# of those sequences: set cursor position including page (\E-PYX, 7714# where P is \s for page 0 and ! for page 1 [actually only the LSB of 7715# P is taken into account, so e.g. 0 and 1 work too,] and Y and X are 7716# as in <cup>); read cursor position (\E/), which is analogous to <u9> 7717# and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX 7718# are as in <cup>, and some "send page" features mainly useful for 7719# forms manipulation. 7720# 7721# The keyboard enable (\E") and disable (\E#) sequences are unused, 7722# except that a terminal reset (<is2>) enables the keyboard. 7723# 7724# Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew) 7725# enabled in <is2>, but auto-flip is very jarring so we don't use it. 7726# 7727# BUGS 7728# 7729# At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed 7730# sequences (I infer that in some TeleVideo terminal they may invert 7731# and uninvert the display) so the <flash> sequence given here is a 7732# cheesy page-flip instead. 7733# 7734# The back_tab (<cbt>) sequence (\EI) doesn't work according to 7735# tack(1), so it is not included in the descriptions below. 7736# 7737# It's not clear whether auto_left_margin (<bw>) flag should be set 7738# for these terminals; tack says yes, so it is set here, but this 7739# differs from other descriptions I've seen. 7740# 7741# Extension print mode (<mc5>) echoes all characters to the printer 7742# port [in addition to displaying them] except for the page print mode 7743# sequence (<mc4>); this is a slight violation of the terminfo 7744# definition for <mc5> but I don't expect it to cause problems. We 7745# reset to page print mode in <rs1> since it may have been enabled 7746# accidentally. 7747# 7748# The descriptions with plus signs (+) are building blocks. 7749 7750tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes), 7751 OTbs, OTpt, am, bw, 7752 cols#80, it#8, lines#24, 7753 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7754 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>, 7755 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>, 7756 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>, 7757 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>, 7758 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J, 7759 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA, 7760 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r, 7761 u7=\E?, u8=%c%c\r, u9=\E?, 7762 7763# This isn't included in the basic capabilities because it is 7764# typically unusable in combination with the full range of video 7765# attributes, since the magic cookie attributes turn into ASCII 7766# control characters, and the half-intensity ("protected") attribute 7767# converts all affected characters to spaces. 7768 7769tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support, 7770 mc0=\EP, 7771 7772# This uses half-intensity mode (<dim>) for standout (<smso>), and 7773# exposes no other attributes (half-intensity is the only attribute 7774# that does not generate a magic cookie.) 7775 7776tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support, 7777 msgr, 7778 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(, 7779 smso=\E), 7780 7781# Full magic-cookie attribute support, with half-intensity reverse 7782# video for standout. Note that we add a space in the <dim> sequence 7783# to give a consistent magic-cookie count. Also note that <sgr> uses 7784# backspacing (in the TVI-supported order) to apply all requested 7785# attributes with only a single magic cookie. 7786 7787tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support, 7788 xmc#1, 7789 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek, 7790 rmul=\Em, 7791 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;, 7792 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El, 7793 7794# This uses the second page memory option to save & restore screen 7795# contents. If your terminal is missing the option, this description 7796# should still work, but that has not been tested. 7797 7798tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support, 7799 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s, 7800 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>, 7801 7802# This simulates flashing by briefly toggling to the other page 7803# (kludge!) 7804 7805tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support, 7806 bel=\EK$<100>\EK, use=tvi912b+2p, 7807 7808# Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>) 7809 7810tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support, 7811 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r, 7812 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r, 7813 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r, 7814 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 7815 kf8=^AG\r, kf9=^AH\r, 7816 7817# Combinations of the basic building blocks 7818 7819tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes), 7820 use=tvi912b+2p, use=tvi912b-unk, 7821 7822tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes), 7823 use=tvi912b+vb, use=tvi912b-unk, 7824 7825tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print), 7826 use=tvi912b+printer, use=tvi912b-unk, 7827 7828tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print), 7829 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk, 7830 7831tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print), 7832 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk, 7833 7834tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute), 7835 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk, 7836 7837tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies), 7838 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk, 7839 7840tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute), 7841 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk, 7842 7843tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies), 7844 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk, 7845 7846tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute), 7847 use=tvi912b+dim, use=tvi912b-unk, 7848 7849tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies), 7850 use=tvi912b+mc, use=tvi912b-unk, 7851 7852tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes), 7853 use=tvi920b+fn, use=tvi912b-unk, 7854 7855tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes), 7856 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk, 7857 7858tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes), 7859 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk, 7860 7861tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print), 7862 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk, 7863 7864tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print), 7865 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer, 7866 use=tvi912b-unk, 7867 7868tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print), 7869 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer, 7870 use=tvi912b-unk, 7871 7872tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute), 7873 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim, 7874 use=tvi912b-unk, 7875 7876tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies), 7877 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc, 7878 use=tvi912b-unk, 7879 7880tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute), 7881 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim, 7882 use=tvi912b-unk, 7883 7884tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies), 7885 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc, 7886 use=tvi912b-unk, 7887 7888tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute), 7889 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk, 7890 7891tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies), 7892 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk, 7893 7894# Televideo 921 and variants 7895# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995 7896# (tvi921: removed :ko=bt: before translation, I see no backtab cap; 7897# also added empty <acsc> to suppress tic warning -- esr) 7898tvi921|televideo model 921 with sysline same as page & real vi function, 7899 OTbs, OTpt, am, hs, xenl, xhp, 7900 cols#80, lines#24, xmc#0, 7901 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 7902 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, 7903 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, 7904 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, 7905 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@, 7906 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H, 7907 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>, 7908 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%, 7909 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr, 7910# without the beeper 7911# (tvi92B: removed :ko=bt: before translation, I see no backtab cap; 7912# also added empty <acsc> to suppress tic warning -- esr) 7913tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper, 7914 am, hs, xenl, xhp, 7915 cols#80, lines#24, xmc#0, 7916 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 7917 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, 7918 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, 7919 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I, 7920 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, 7921 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, 7922 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, 7923 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, 7924 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr, 7925# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr) 7926tvi92D|tvi92B with DTR instead of XON/XOFF & better padding, 7927 dl1=\ER$<2*/>, il1=\EE$<2*/>, 7928 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>, 7929 kil1=\EE$<2*/>, use=tvi92B, 7930 7931# (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings 7932# in from a BSD termcap file because it looks like they do something the 7933# old ones skip -- esr) 7934tvi924|televideo tvi924, 7935 am, bw, hs, in, mir, msgr, xenl, xon, 7936 cols#80, it#8, lines#24, wsl#80, xmc#0, 7937 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0, 7938 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c, 7939 cub1=^H, cud1=^V, cuf1=^L, 7940 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1, 7941 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et, 7942 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1, 7943 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, 7944 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0, 7945 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, 7946 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r, 7947 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r, 7948 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, 7949 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^, 7950 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4, 7951 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, 7952 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef, 7953 use=adm+sgr, 7954 7955# TVI925 DIP switches. In each of these, D = Down and U = Up, 7956# 7957# Here are the settings for the external (baud) switches (S1): 7958# 7959# Position Baud 7960# 7 8 9 10 [Printer] 7961# 1 2 3 4 [Main RS232] 7962# ----------------------------------------------------- 7963# D D D D 9600 7964# D D D U 50 7965# D D U D 75 7966# D D U U 110 7967# D U D D 135 7968# D U D U 150 7969# D U U D 300 7970# D U U U 600 7971# U D D D 1200 7972# U D D U 1800 7973# U D U D 2400 7974# U D U U 3600 7975# U U D D 4800 7976# U U D U 7200 7977# U U U D 9600 7978# U U U U 19200 7979# 7980# 7981# Settings for word length and stop-bits (S1) 7982# 7983# Position Description 7984# 5 6 7985# --------------------------- 7986# U - 7-bit word 7987# D - 8-bit word 7988# - U 2 stop bits 7989# - D 1 stop bit 7990# 7991# 7992# S2 (external) settings 7993# 7994# Position Up Dn Description 7995# -------------------------------------------- 7996# 1 X Local edit 7997# X Duplex edit (transmit editing keys) 7998# -------------------------------------------- 7999# 2 X 912/920 emulation 8000# X 925 8001# -------------------------------------------- 8002# 3 X 8003# 4 X No parity 8004# 5 X 8005# -------------------------------------------- 8006# 3 X 8007# 4 X Odd parity 8008# 5 X 8009# -------------------------------------------- 8010# 3 X 8011# 4 X Even parity 8012# 5 X 8013# -------------------------------------------- 8014# 3 X 8015# 4 X Mark parity 8016# 5 X 8017# -------------------------------------------- 8018# 3 X 8019# 4 X Space parity 8020# 5 X 8021# -------------------------------------------- 8022# 6 X White on black display 8023# X Black on white display 8024# -------------------------------------------- 8025# 7 X Half Duplex 8026# 8 X 8027# -------------------------------------------- 8028# 7 X Full Duplex 8029# 8 X 8030# -------------------------------------------- 8031# 7 X Block mode 8032# 8 X 8033# -------------------------------------------- 8034# 9 X 50 Hz 8035# X 60 Hz 8036# -------------------------------------------- 8037# 10 X CR/LF (Auto LF) 8038# X CR only 8039# 8040# S3 (internal switch) settings: 8041# 8042# Position Up Dn Description 8043# -------------------------------------------- 8044# 1 X Keyclick off 8045# X Keyclick on 8046# -------------------------------------------- 8047# 2 X English 8048# 3 X 8049# -------------------------------------------- 8050# 2 X German 8051# 3 X 8052# -------------------------------------------- 8053# 2 X French 8054# 3 X 8055# -------------------------------------------- 8056# 2 X Spanish 8057# 3 X 8058# -------------------------------------------- 8059# 4 X Blinking block cursor 8060# 5 X 8061# -------------------------------------------- 8062# 4 X Blinking underline cursor 8063# 5 X 8064# -------------------------------------------- 8065# 4 X Steady block cursor 8066# 5 X 8067# -------------------------------------------- 8068# 4 X Steady underline cursor 8069# 5 X 8070# -------------------------------------------- 8071# 6 X Screen blanking timer (ON) 8072# X Screen blanking timer (OFF) 8073# -------------------------------------------- 8074# 7 X Page attributes 8075# X Line attributes 8076# -------------------------------------------- 8077# 8 X DCD disconnected 8078# X DCD connected 8079# -------------------------------------------- 8080# 9 X DSR disconnected 8081# X DSR connected 8082# -------------------------------------------- 8083# 10 X DTR Disconnected 8084# X DTR connected 8085# -------------------------------------------- 8086# 8087# (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr) 8088tvi925|televideo 925, 8089 OTbs, am, bw, hs, ul, 8090 cols#80, lines#24, xmc#1, 8091 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V, 8092 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 8093 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET, 8094 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1, 8095 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z, 8096 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 8097 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 8098 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 8099 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3, 8100 tsl=\Eh\Ef, use=adm+sgr, 8101# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL 8102# to avoid "magic cookie" standout glitch: 8103tvi925-hi|TeleVideo Model 925 with half intensity standout mode, 8104 xmc@, 8105 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925, 8106 8107# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993 8108# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82 8109# for additional capabilities, 8110# The following tvi descriptions from B:pjphar and virus!mike 8111# is for all 950s. It sets the following attributes: 8112# full duplex (\EDF) write protect off (\E() 8113# conversation mode (\EC) graphics mode off (\E%) 8114# white on black (\Ed) auto page flip off (\Ew) 8115# turn off status line (\Eg) clear status line (\Ef\r) 8116# normal video (\E0) monitor mode off (\EX or \Eu) 8117# edit mode (\Er) load blank char to space (\Ee\040) 8118# line edit mode (\EO) enable buffer control (^O) 8119# protect mode off (\E\047) duplex edit keys (\El) 8120# program unshifted send key to send line all (\E016) 8121# program shifted send key to send line unprotected (\E004) 8122# set the following to nulls: 8123# field delimiter (\Ex0\200\200) 8124# line delimiter (\Ex1\200\200) 8125# start-protected field delimiter (\Ex2\200\200) 8126# end-protected field delimiter (\Ex3\200\200) 8127# set end of text delimiter to carriage return/null (\Ex4\r\200) 8128# 8129# TVI 950 Switch Setting Reference Charts 8130# 8131# TABLE 1: 8132# 8133# S1 1 2 3 4 5 6 7 8 9 10 8134# +-----------------------+-----+-----+-----------------------+ 8135# | Computer Baud Rate |Data |Stop | Printer Baud Rate | 8136# | |Bits |Bits | | 8137# +------+-----------------------+-----+-----+-----------------------+ 8138# | Up | See | 7 | 2 | See | 8139# +------+-----------------------+-----+-----+-----------------------+ 8140# | Down | TABLE 2 | 8 | 1 | TABLE 2 | 8141# +------+-----------------------+-----+-----+-----------------------+ 8142# 8143# 8144# S2 1 2 3 4 5 6 7 8 9 10 8145# +-----+-----+-----------------+-----+-----------+-----+-----+ 8146# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click| 8147# +------+-----+-----+-----------------+-----+-----------+-----+-----+ 8148# | Up | Dplx|Blink| See |GonBk| See | 60 | Off | 8149# +------+-----+-----+-----------------+-----+-----------+-----+-----+ 8150# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On | 8151# +------+-----+-----+-----------------+-----+-----------+-----+-----+ 8152# 8153# TABLE 2: 8154# 8155# +-----------+-----+-----+-----+-----+-----------+ 8156# | Display | 1 | 2 | 3 | 4 | Baud | 8157# +-----------+-----+-----+-----+-----+ | 8158# | Printer | 7 | 8 | 9 | 10 | Rate | 8159# +-----------+-----+-----+-----+-----+-----------+ 8160# | D | D | D | D | 9600 | 8161# | U | D | D | D | 50 | 8162# | D | U | D | D | 75 | 8163# | U | U | D | D | 110 | 8164# | D | D | U | D | 135 | 8165# | U | D | U | D | 150 | 8166# | D | U | U | D | 300 | 8167# | U | U | U | D | 600 | 8168# | D | D | D | U | 1200 | 8169# | U | D | D | U | 1800 | 8170# | D | U | D | U | 2400 | 8171# | U | U | D | U | 3600 | 8172# | D | D | U | U | 4800 | 8173# | U | D | U | U | 7200 | 8174# | D | U | U | U | 9600 | 8175# | U | U | U | U | 19200 | 8176# +-----+-----+-----+-----+-----------+ 8177# 8178# TABLE 3: 8179# +-----+-----+-----+-----------+ 8180# | 3 | 4 | 5 | Parity | 8181# +-----+-----+-----+-----------+ 8182# | X | X | D | None | 8183# | D | D | U | Odd | 8184# | D | U | U | Even | 8185# | U | D | U | Mark | 8186# | U | U | U | Space | 8187# +-----+-----+-----+-----------+ 8188# X = don't care 8189# 8190# CHART: 8191# +-----+-----+-----------------+ 8192# | 7 | 8 | Communication | 8193# +-----+-----+-----------------+ 8194# | D | D | Half Duplex | 8195# | D | U | Full Duplex | 8196# | U | D | Block | 8197# | U | U | Local | 8198# +-----+-----+-----------------+ 8199# 8200# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:". 8201# I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich> 8202# should be present and all tvi native modes use the same string for this. 8203# Finally, note that BSD has cud1=^V. -- esr) 8204tvi950|televideo 950, 8205 OTbs, am, hs, mir, msgr, xenl, xon, 8206 cols#80, it#8, lines#24, xmc#1, 8207 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*, 8208 cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8209 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 8210 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed, 8211 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J, 8212 invis@, 8213 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r, 8214 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L, 8215 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r, 8216 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 8217 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 8218 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X, 8219 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, 8220 use=adm+sgr, 8221# 8222# is for 950 with two pages adds the following: 8223# set 48 line page (\E\\2) 8224# place cursor at page 0, line 24, column 1 (\E-07 ) 8225# set local (no send) edit keys (\Ek) 8226# 8227# two page 950 adds the following: 8228# when entering ex, set 24 line page (\E\\1) 8229# when exiting ex, reset 48 line page (\E\\2) 8230# place cursor at 0,24,1 (\E-07 ) 8231# set duplex (send) edit keys (\El) when entering vi 8232# set local (no send) edit keys (\Ek) when exiting vi 8233# 8234tvi950-2p|televideo950 w/2 pages, 8235 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011, 8236 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 8237 smkx=\El, use=tvi950, 8238# 8239# is for 950 with four pages adds the following: 8240# set 96 line page (\E\\3) 8241# place cursor at page 0, line 24, column 1 (\E-07 ) 8242# 8243# four page 950 adds the following: 8244# when entering ex, set 24 line page (\E\\1) 8245# when exiting ex, reset 96 line page (\E\\3) 8246# place cursor at 0,24,1 (\E-07 ) 8247# 8248tvi950-4p|televideo950 w/4 pages, 8249 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011, 8250 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 8251 smkx=\El, use=tvi950, 8252# 8253# <is2> for reverse video 950 changes the following: 8254# set reverse video (\Ed) 8255# 8256# set vb accordingly (\Ed ...delay... \Eb) 8257# 8258tvi950-rv|televideo950 rev video, 8259 flash=\Ed$<200/>\Eb, 8260 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0, 8261 use=tvi950, 8262 8263# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv 8264tvi950-rv-2p|televideo950 rev video w/2 pages, 8265 flash=\Ed$<200/>\Eb, 8266 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s, 8267 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 8268 smkx=\El, use=tvi950, 8269 8270# tvi950-rv uses the appropriate entries from 950-4p and 950-rv 8271tvi950-rv-4p|televideo950 rev video w/4 pages, 8272 flash=\Ed$<200/>\Eb, 8273 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s, 8274 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 8275 smkx=\El, use=tvi950, 8276# From: Andreas Stolcke <stolcke@icsi.berkeley.edu> 8277# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H"; 8278# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in 8279# the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note 8280# the :ko: string had :cl: in it, which means that one of the original 8281# <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what 8282# the 950 has. Finally, corrected the <kel> string to match the 950 and what 8283# ko implies -- esr) 8284# If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would 8285# also work. 8286tvi955|televideo 955, 8287 OTbs, mc5i, msgr@, 8288 it#8, xmc@, 8289 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2, 8290 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH, 8291 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1, 8292 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1, 8293 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%, 8294 rmam=\E[=7l, rmxon=^N, 8295 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r, 8296 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O, 8297 use=tvi950, 8298tvi955-w|955-w|televideo955 w/132 cols, 8299 cols#132, 8300 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955, 8301# use half-intensity as normal mode, full intensity as <bold> 8302tvi955-hb|955-hb|televideo955 half-bright, 8303 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El, 8304 sgr0=\EG0\E[=5h, use=tvi955, 8305# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin 8306# (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m; 8307# added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL. 8308# According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what 8309# it does to the function keys. I deduced <rmam>/<smam>. 8310# also added empty <acsc> to suppress tic warning, -- esr) 8311tvi970|televideo 970, 8312 OTbs, OTpt, am, da, db, mir, msgr, 8313 cols#80, it#8, lines#24, 8314 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, 8315 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, 8316 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r, 8317 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H, 8318 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L, 8319 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J, 8320 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 8321 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f, 8322 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B, 8323 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m, 8324 sgr0=\E[m, smacs=\E(B, smam=\E[?7l, 8325 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m, 8326 smul=\E[4m, vpa=\E[%i%p1%dd, 8327tvi970-vb|televideo 970 with visual bell, 8328 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, 8329 use=tvi970, 8330tvi970-2p|televideo 970 with using 2 pages of memory, 8331 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q, 8332 use=tvi970, 8333# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars 8334# per line (rather than 40), Esc K chooses the normal character set. Not sure 8335# padding is needed, but adapted from the tvi920c termcap. The <smso> and 8336# <smul> strings are klutzy, but at least use no screen space. 8337# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>, 8338# its absence means <smam>=\Ev isn't safe to use. -- esr) 8339# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84. 8340# The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says: 8341# F1 and F2 should be programmed as ^A and ^B; required for UNIFY. 8342tvipt|televideo personal terminal, 8343 OTbs, am, 8344 cols#80, lines#24, 8345 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L, 8346 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>, 8347 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt, 8348 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J, 8349 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R, 8350 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH, 8351# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996 8352tvi9065|televideo 9065, 8353 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon, 8354 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0, 8355 wnum#0, wsl#30, 8356 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G, 8357 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z, 8358 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, 8359 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L, 8360 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA, 8361 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp, 8362 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY, 8363 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, 8364 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt, 8365 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1, 8366 ip=$<3>, 8367 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er, 8368 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s, 8369 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, 8370 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, 8371 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 8372 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H, 8373 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J, 8374 pfkey=\E|%p1%{48}%+%c3%p2%s\031, 8375 pfloc=\E|%p1%{48}%+%c2%p2%s\031, 8376 pfx=\E|%p1%{48}%+%c1%p2%s\031, 8377 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&, 8378 rep=\E[%p2%db%p1%c, rev=\EG4, 8379 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT, 8380 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, 8381 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, 8382 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l, 8383 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1, 8384 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0, 8385 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;, 8386 sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er, 8387 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O, 8388 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, 8389 8390#### Visual (vi) 8391# 8392# In September 1993, Visual Technology of Westboro, Massachusetts, 8393# merged with White Pine Software of Nashua, New Hampshire. 8394# 8395# White Pine Software may be contacted at +1 603/886-9050. 8396# Or visit White Pine on the World Wide Web at URL http://www.wpine.com. 8397# 8398 8399# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs> 8400# Recently I hacked together the following termcap for Visual 8401# Technology's Visual 50 terminal. It's a slight modification of 8402# the vt52 termcap. 8403# It's intended to run when the Visual 50 is in vt52 emulation mode 8404# (I know what you're thinking; if it's emulating a vt52, then why 8405# another termcap? Well, it turns out that the Visual 50 can handle 8406# <dl1> and db(?) among other things, which the vt52 can't) 8407# The termcap works OK for the most part. The only problem is on 8408# character inserts. The whole line gets painfully redrawn for each 8409# character typed. Any suggestions? 8410# Beau's entry is combined with the vi50 entry from University of Wisconsin. 8411# Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in 8412# disguise; <kf7>-<kf9> are really l1-l3. 8413vi50|visual 50, 8414 OTbs, OTpt, am, da, db, msgr, 8415 cols#80, it#8, lines#24, 8416 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H, 8417 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 8418 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH, 8419 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 8420 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV, 8421 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH, 8422 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES, 8423# this one was BSD & SCO's vi50 8424vi50adm|visual 50 in adm3a mode, 8425 am, msgr, 8426 cols#80, it#8, lines#24, 8427 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8428 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM, 8429 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H, 8430 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, 8431 rmso=\ET, smso=\EU, 8432# From: Jeff Siegal <jbs@quiotix.com> 8433vi55|Visual 55, 8434 OTbs, am, mir, msgr, 8435 cols#80, it#8, lines#24, 8436 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H, 8437 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 8438 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, 8439 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED, 8440 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET, 8441 smir=\Ea, smso=\EU, 8442 8443# Visual 200 from BRL 8444# The following switch settings are assumed for normal operation: 8445# FULL_DUPLEX SCROLL CR 8446# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE 8447# Other switches may be set for operator convenience or communication 8448# requirements. 8449# Character insertion is kludged in order to get around the "beep" misfeature. 8450# (This cap is commented out because <smir>/<rmir> is more efficient -- esr) 8451# Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>, 8452# and <dl1> strings, but we seem to get along fine without them. 8453vi200|visual 200, 8454 OTbs, OTpt, am, mir, msgr, 8455 OTkn#10, cols#80, it#8, lines#24, 8456 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H, 8457 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 8458 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, 8459 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea, 8460 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 8461 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, 8462 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, 8463 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, 8464 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, 8465 rmacs=\EG, rmkx=\E>, rmso=\E3, 8466 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF, 8467 smkx=\E=, smso=\E4, tbc=\Eg, 8468# The older Visuals didn't come with function keys. This entry uses 8469# <smkx> and <rmkx> so that the keypad keys can be used as function keys. 8470# If your version of vi doesn't support function keys you may want 8471# to use vi200-f. 8472vi200-f|visual 200 no function keys, 8473 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q, 8474 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w, 8475 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@, 8476 use=vi200, 8477vi200-rv|visual 200 reverse video, 8478 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200, 8479 8480# the function keys are programmable but we don't reprogram them to their 8481# default values with <is2> because programming them is very verbose. maybe 8482# an initialization file should be made for the 300 and they could be stuck 8483# in it. 8484# (vi300: added <rmam>/<smam> based on init string -- esr) 8485vi300|visual 300 ansi x3.64, 8486 am, bw, mir, xenl, 8487 cols#80, lines#24, 8488 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, 8489 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 8490 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 8491 il1=\E[L, ind=^J, 8492 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s, 8493 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 8494 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\, 8495 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\, 8496 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l, 8497 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, 8498 smso=\E[1m, smul=\E[4m, 8499# some of the vi300s have older firmware that has the command 8500# sequence for setting editing extent reversed. 8501vi300-old|visual 300 with old firmware (set edit extent reversed), 8502 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, 8503 use=vi300, 8504 8505# Visual 500 prototype entry from University of Wisconsin. 8506# The best place to look for the escape sequences is page A1-1 of the 8507# Visual 500 manual. The initialization sequence given here may be 8508# overkill, but it does leave out some of the initializations which can 8509# be done with the menus in set-up mode. 8510# The :xp: line below is so that emacs can understand the padding requirements 8511# of this slow terminal. :xp: is 10 time the padding factor. 8512# (vi500: removed unknown :xp#4: termcap; 8513# also added empty <acsc> to suppress tic warning -- esr) 8514vi500|visual 500, 8515 am, mir, msgr, 8516 cols#80, it#8, lines#33, 8517 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M, 8518 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB, 8519 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 8520 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>, 8521 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>, 8522 ind=^J, 8523 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\, 8524 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 8525 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G, 8526 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D, 8527 8528# The visual 550 is a visual 300 with tektronix graphics, 8529# and with 33 lines. clear screen is modified here to 8530# also clear the graphics. 8531vi550|visual 550 ansi x3.64, 8532 lines#33, 8533 clear=\030\E[H\E[2J, use=vi300, 8534 8535vi603|visual603|visual 603, 8536 hs, mir, 8537 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 8538 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C, 8539 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 8540 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L, 8541 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r, 8542 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 8543 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~, 8544 use=vt100, 8545 8546#### Wyse (wy) 8547# 8548# Wyse Technology 8549# 3471 North First Street 8550# San Jose, CA 95134 8551# Vox: (408)-473-1200 8552# Fax: (408) 473-1222 8553# Web: http://www.wyse.com 8554# 8555# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at 8556# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the 8557# obvious address, <http://www.wyse.com>. They keep terminfo entries at 8558# <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>. 8559# 8560# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995. 8561# They now own the Qume and Amdek brands, too. So these are the people to 8562# talk with about all Link, Qume, and Amdek terminals. 8563# 8564# These entries include a few small fixes. 8565# I canceled the bel capacities in the vb entries. 8566# I made two trivial syntax fixes in the wyse30 entry. 8567# I made some entries relative to adm+sgr. 8568# 8569# 8570# Note: The wyse75, wyse85, and wyse99 have been discontinued. 8571 8572# Although the Wyse 30 can support more than one attribute 8573# it requires magic cookies to do so. Many applications do not 8574# function well with magic cookies. The following terminfo uses 8575# the protect mode to support one attribute (dim) without cookies. 8576# If more than one attribute is needed then the wy30-mc terminfo 8577# should be used. 8578# 8579wy30|wyse30|Wyse 30, 8580 am, bw, hs, mc5i, mir, msgr, xon, 8581 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, 8582 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, 8583 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H, 8584 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 8585 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>, 8586 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9, 8587 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>, 8588 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024, 8589 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, 8590 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, 8591 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 8592 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ, 8593 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T, 8594 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177, 8595 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>, 8596 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, 8597 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 8598 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, 8599 smso=\E`7\E), tbc=\E0, tsl=\EF, 8600# 8601# This terminal description uses the non-hidden attribute mode 8602# (with magic cookie). 8603# 8604# (wy30-mc: added <smcup> to suppress tic warning --esr) 8605wy30-mc|wyse30-mc|wyse 30 with magic cookies, 8606 msgr@, 8607 ma@, xmc#1, 8608 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003, 8609 rmcup=\EG0, rmso=\EG0, 8610 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 8611 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, 8612 smso=\EG4, use=wy30, use=adm+sgr, 8613# The mandatory pause used by <flash> does not work with 8614# older versions of terminfo. If you see this effect then 8615# unset xon and delete the / from the delay. 8616# i.e. change $<100/> to $<100> 8617wy30-vb|wyse30-vb|wyse 30 visible bell, 8618 bel@, use=wy30, 8619# 8620# The Wyse 50 can support one attribute (e.g. Dim, Inverse, 8621# Normal) without magic cookies by using the protect mode. 8622# The following description uses this feature, but when more 8623# than one attribute is put on the screen at once, all attributes 8624# will be changed to be the same as the last attribute given. 8625# The Wyse 50 can support more attributes when used with magic 8626# cookies. The wy50-mc terminal description uses magic cookies 8627# to correctly handle multiple attributes on a screen. 8628# 8629wy50|wyse50|Wyse 50, 8630 am, bw, hs, mc5i, mir, msgr, xon, 8631 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, 8632 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, 8633 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H, 8634 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 8635 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r, 8636 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, 8637 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>, 8638 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H, 8639 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, 8640 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, 8641 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 8642 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 8643 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 8644 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 8645 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, 8646 pfx=\Ez%p1%{63}%+%c%p2%s\177, 8647 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E), 8648 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, 8649 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 8650 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, 8651 smso=\E`6\E), tbc=\E0, tsl=\EF, 8652# 8653# This terminal description uses the non-hidden attribute mode 8654# (with magic cookie). 8655# 8656# The mandatory pause used by flash does not work with some 8657# older versions of terminfo. If you see this effect then 8658# unset <xon> and delete the / from the delay. 8659# i.e. change $<100/> to $<100> 8660# (wy50-mc: added <smcup> to suppress tic warning --esr) 8661wy50-mc|wyse50-mc|wyse 50 with magic cookies, 8662 msgr@, 8663 ma@, xmc#1, 8664 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4, 8665 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0, 8666 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 8667 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, 8668 smso=\EGt, use=wy50, use=adm+sgr, 8669wy50-vb|wyse50-vb|wyse 50 visible bell, 8670 bel@, use=wy50, 8671wy50-w|wyse50-w|wyse 50 132-column, 8672 cols#132, lw#7, nlab#16, wsl#97, 8673 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, 8674 use=wy50, 8675wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell, 8676 bel@, use=wy50-w, 8677 8678# 8679# The Wyse 350 is a Wyse 50 with color. 8680# Unfortunately this means that it has magic cookies. 8681# The color attributes are designed to overlap the reverse, dim and 8682# underline attributes. This is nice for monochrome applications 8683# because you can make underline stuff green (or any other color) 8684# but for true color applications it's not so hot because you cannot 8685# mix color with reverse, dim or underline. 8686# To further complicate things one of the attributes must be 8687# black (either the foreground or the background). In reverse video 8688# the background changes color with black letters. In normal video 8689# the foreground changes colors on a black background. 8690# This terminfo uses some of the more advanced features of curses 8691# to display both color and blink. In the final analysis I am not 8692# sure that the wy350 runs better with this terminfo than it does 8693# with the wy50 terminfo (with user adjusted colors). 8694# 8695# The mandatory pause used by flash does not work with 8696# older versions of terminfo. If you see this effect then 8697# unset xon and delete the / from the delay. 8698# i.e. change $<100/> to $<100> 8699# 8700# Bug: The <op> capability resets attributes. 8701wy350|wyse350|Wyse 350, 8702 am, bw, hs, mc5i, mir, xon, 8703 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8, 8704 wsl#45, xmc#1, 8705 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 8706 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, 8707 cub1=^H, cud1=^J, cuf1=^L, 8708 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>, 8709 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET, 8710 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, 8711 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>, 8712 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI, 8713 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 8714 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, 8715 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 8716 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 8717 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 8718 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 8719 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0, 8720 pfx=\Ez%p1%{63}%+%c%p2%s\177, 8721 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej, 8722 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=, 8723 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c, 8724 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 8725 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002, 8726 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr, 8727wy350-vb|wyse350-vb|wyse 350 visible bell, 8728 bel@, use=wy350, 8729wy350-w|wyse350-w|wyse 350 132-column, 8730 cols#132, lw#7, nlab#16, wsl#97, 8731 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, 8732 use=wy350, 8733wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell, 8734 bel@, use=wy350-w, 8735# 8736# This terminfo description is untested. 8737# The wyse100 emulates an adm31, so the adm31 entry should work. 8738# 8739wy100|wyse 100, 8740 hs, mir, 8741 cols#80, lines#24, xmc#1, 8742 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8743 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 8744 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J, 8745 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, 8746 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, 8747 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{, 8748 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr, 8749# 8750# The Wyse 120/150 has most of the features of the Wyse 60. 8751# This terminal does not need padding up to 9600 baud! 8752# <msgr> should be set but the clear screen fails when in 8753# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear 8754# then set <msgr>. 8755# 8756wy120|wyse120|wy150|wyse150|Wyse 120/150, 8757 am, bw, hs, km, mc5i, mir, msgr, xon, 8758 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, 8759 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 8760 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, 8761 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8762 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, 8763 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, 8764 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>, 8765 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, 8766 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 8767 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 8768 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 8769 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 8770 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 8771 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 8772 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 8773 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, 8774 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, 8775 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 8776 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 8777 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, 8778 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11, 8779 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, 8780 rs3=\EwG\Ee($<100>, 8781 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 8782 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 8783 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 8784 tbc=\E0, tsl=\EF, use=adm+sgr, 8785# 8786wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column, 8787 cols#132, lw#7, nlab#16, wsl#97, 8788 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, 8789 rs2=\E`;$<70>, use=wy120, 8790# 8791wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines, 8792 lh@, lines#25, lw@, nlab@, 8793 pln@, rs3=\EwG\Ee)$<100>, use=wy120, 8794# 8795wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines, 8796 lh@, lines#25, lw@, nlab@, 8797 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w, 8798# 8799wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell, 8800 bel@, use=wy120, 8801# 8802wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell, 8803 bel@, use=wy120-w, 8804# 8805# The Wyse 60 is like the Wyse 50 but with more padding. 8806# The reset strings are slow and the pad times very depending 8807# on other parameters such as font loading. I have tried 8808# to follow the following outline: 8809# 8810# <rs1> -> set personality 8811# <rs2> -> set number of columns 8812# <rs3> -> set number of lines 8813# <is1> -> select the proper font 8814# <is2> -> do the initialization 8815# <is3> -> set up display memory (2 pages) 8816# 8817# The Wyse 60's that have vt100 emulation are slower than the 8818# older Wyse 60's. This change happened mid-1987. 8819# The capabilities effected are <dch1> <dl1> <il1> <ind> <ri> 8820# 8821# The meta key is only half right. This terminal will return the 8822# high order bit set when you hit CTRL-function_key 8823# 8824# It may be useful to assign two function keys with the 8825# values \E=(\s look at old data in page 1 8826# \E=W, look at bottom of page 1 8827# where \s is a space ( ). 8828# 8829# Note: 8830# The Wyse 60 runs faster when the XON/XOFF 8831# handshake is turned off. 8832# 8833# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid 8834# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr) 8835wy60|wyse60|Wyse 60, 8836 am, bw, hs, km, mc5i, mir, msgr, 8837 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45, 8838 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 8839 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>, 8840 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8841 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 8842 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r, 8843 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, 8844 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>, 8845 ip=$<3>, is1=\EcB0\EcC1, 8846 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 8847 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 8848 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 8849 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 8850 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 8851 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 8852 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 8853 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, 8854 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, 8855 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 8856 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 8857 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, 8858 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er, 8859 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>, 8860 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>, 8861 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 8862 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 8863 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 8864 tbc=\E0, tsl=\EF, use=adm+sgr, 8865# 8866wy60-w|wyse60-w|wyse 60 132-column, 8867 cols#132, lw#7, nlab#16, wsl#97, 8868 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>, 8869 rs2=\EeF$<150>\E`;$<150>, use=wy60, 8870# 8871wy60-25|wyse60-25|wyse 60 80-column 25-lines, 8872 lh@, lines#25, lw@, nlab@, 8873 pln@, rs3=\EwG\Ee)$<200>, use=wy60, 8874wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines, 8875 lh@, lines#25, lw@, nlab@, 8876 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w, 8877# 8878wy60-42|wyse60-42|wyse 60 80-column 42-lines, 8879 lines#42, 8880 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>, 8881 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>, 8882 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>, 8883 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60, 8884wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines, 8885 cols#132, lw#7, nlab#16, wsl#97, 8886 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>, 8887 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>, 8888 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42, 8889# 8890wy60-43|wyse60-43|wyse 60 80-column 43-lines, 8891 lh@, lines#43, lw@, nlab@, 8892 pln@, rs3=\Ee+$<150>, use=wy60-42, 8893wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines, 8894 lh@, lines#43, lw@, nlab@, 8895 pln@, rs3=\Ee+$<150>, use=wy60-42-w, 8896# 8897wy60-vb|wyse60-vb|Wyse 60 visible bell, 8898 bel@, use=wy60, 8899wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell, 8900 bel@, use=wy60-w, 8901 8902# The Wyse-99GT looks at lot like the Wyse 60 except that it 8903# does not have the 42/43 line mode. In the Wyse-60 the "lines" 8904# setup parameter controls the number of lines on the screen. 8905# For the Wyse 99GT the "lines" setup parameter controls the 8906# number of lines in a page. The screen can display 25 lines max. 8907# The Wyse-99GT also has personalities for the VT220 and 8908# Tektronix 4014. But this has no bearing on the native mode. 8909# 8910# (msgr) should be set but the clear screen fails when in 8911# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear 8912# then set msgr, else use msgr@. 8913# 8914# u0 -> enter Tektronix mode 8915# u1 -> exit Tektronix mode 8916# 8917wy99gt|wyse99gt|Wyse 99gt, 8918 msgr@, 8919 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>, 8920 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>, 8921 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@, 8922 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1, 8923 u0=\E~>\E8, u1=\E[42h, use=wy60, 8924# 8925wy99gt-w|wyse99gt-w|wyse 99gt 132-column, 8926 cols#132, lw#7, nlab#16, wsl#97, 8927 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>, 8928 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>, 8929 use=wy99gt, 8930# 8931wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines, 8932 lh@, lines#25, lw@, nlab@, 8933 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt, 8934# 8935wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines, 8936 lh@, lines#25, lw@, nlab@, 8937 pln@, rs2=\E`;$<150>, use=wy99gt-w, 8938# 8939wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell, 8940 bel@, use=wy99gt, 8941# 8942wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell, 8943 bel@, use=wy99gt-w, 8944 8945# Can't set tabs! Other bugs (ANSI mode only): 8946# - can't redefine function keys (anyway, key redefinition in ANSI mode 8947# is too much complex to be described); 8948# - meta key can't be described (the terminal forgets it when reset); 8949# The xon-xoff handshaking can't be disabled while in ansi personality, so 8950# emacs can't work at speed greater than 9600 baud. No padding is needed at 8951# this speed. 8952# dch1 has been commented out because it causes annoying glittering when 8953# vi deletes one character at the beginning of a line with tabs in it. 8954# dch makes sysgen(1M) have a horrible behaviour when deleting 8955# a screen and makes screen(1) behave badly, so it is disabled too. The nice 8956# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are 8957# not, so smir and rmir are commented out as well. 8958# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 8959wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard), 8960 am, km, mc5i, mir, msgr, xenl, 8961 cols#80, it#8, lines#25, vt#3, 8962 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~, 8963 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 8964 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M, 8965 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>, 8966 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED, 8967 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>, 8968 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 8969 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 8970 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>, 8971 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H, 8972 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, 8973 il1=\E[L, ind=\n$<1>, invis=\E[8m, 8974 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i, 8975 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 8976 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 8977 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ, 8978 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~, 8979 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~, 8980 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h, 8981 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8, 8982 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 8983 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m, 8984 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i, 8985 sc=\E7, 8986 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;, 8987 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h, 8988 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, 8989 8990# This is the american terminal. Here tabs work fine. 8991# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 8992wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard), 8993 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi, 8994 8995# This terminal (firmware version 02) has a lot of bugs: 8996# - can't set tabs; 8997# - other bugs in ANSI modes (see above). 8998# This description disables handshaking when using cup. This is because 8999# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal 9000# cannot be used at speeds greater than 9600 baud, because at greater 9001# speeds handshaking is needed even for character sending. If you use 9002# DTR handshaking, you can use even greater speeds. 9003# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 9004wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard), 9005 am, bw, hs, km, mc5i, mir, msgr, xon, 9006 cols#80, it#8, lines#25, wsl#46, 9007 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G, 9008 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032, 9009 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L, 9010 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 9011 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r, 9012 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>, 9013 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE, 9014 ind=^J, invis=\EG3, 9015 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024, 9016 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, 9017 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, 9018 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r, 9019 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r, 9020 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r, 9021 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 9022 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#, 9023 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed., 9024 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30, 9025 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024, 9026 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;, 9027 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30, 9028 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF, 9029 9030# This is the american terminal. Here tabs work. 9031# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 9032wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard), 9033 hts=\E1, tbc=\E0, use=wy99f, 9034 9035# 9036# The Wyse 160 is combination of the WY-60 and the WY-99gt. 9037# The reset strings are slow and the pad times very depending 9038# on other parameters such as font loading. I have tried 9039# to follow the following outline: 9040# 9041# <rs1> -> set personality 9042# <rs2> -> set number of columns 9043# <rs3> -> set number of lines 9044# <is1> -> select the proper font 9045# <is2> -> do the initialization 9046# <is3> -> set up display memory (2 pages) 9047# 9048# The display memory may be used for either text or graphics. 9049# When "Display Memory = Shared" the terminal will have more pages 9050# but garbage may be left on the screen when you switch from 9051# graphics to text. If "Display Memory = Unshared" then the 9052# text area will be only one page long. 9053# 9054# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid 9055# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr) 9056wy160|wyse160|Wyse 160, 9057 am, bw, hs, km, mc5i, mir, msgr, 9058 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38, 9059 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 9060 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>, 9061 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 9062 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>, 9063 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>, 9064 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I, 9065 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1, 9066 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 9067 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 9068 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 9069 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 9070 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 9071 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 9072 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 9073 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, 9074 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>, 9075 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 9076 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 9077 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>, 9078 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er, 9079 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>, 9080 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>, 9081 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 9082 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 9083 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 9084 tbc=\E0, tsl=\EF, use=adm+sgr, 9085# 9086wy160-w|wyse160-w|wyse 160 132-column, 9087 cols#132, lw#7, nlab#16, wsl#90, 9088 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>, 9089 rs2=\EeF$<150>\E`;$<150>, use=wy160, 9090# 9091wy160-25|wyse160-25|wyse 160 80-column 25-lines, 9092 lh@, lines#25, lw@, nlab@, 9093 pln@, rs3=\EwG\Ee)$<200>, use=wy160, 9094wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines, 9095 lh@, lines#25, lw@, nlab@, 9096 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w, 9097# 9098wy160-42|wyse160-42|wyse 160 80-column 42-lines, 9099 lines#42, 9100 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>, 9101 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>, 9102 rs3=\Ee*$<150>, use=wy160, 9103wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines, 9104 cols#132, lw#7, nlab#16, wsl#90, 9105 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>, 9106 rs2=\EeF$<150>\E`;$<150>, use=wy160-42, 9107# 9108wy160-43|wyse160-43|wyse 160 80-column 43-lines, 9109 lh@, lines#43, lw@, nlab@, 9110 pln@, rs3=\Ee+$<150>, use=wy160-42, 9111wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines, 9112 lh@, lines#43, lw@, nlab@, 9113 pln@, rs3=\Ee+$<150>, use=wy160-42-w, 9114# 9115wy160-vb|wyse160-vb|Wyse 160 visible bell, 9116 bel@, use=wy160, 9117wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell, 9118 bel@, use=wy160-w, 9119# 9120# The Wyse 75 is a vt100 lookalike without advanced video. 9121# 9122# The Wyse 75 can support one attribute (e.g. Dim, Inverse, 9123# Underline) without magic cookies. The following description 9124# uses this capability, but when more than one attribute is 9125# put on the screen at once, all attributes will be changed 9126# to be the same as the last attribute given. 9127# The Wyse 75 can support more attributes when used with magic 9128# cookies. The wy75-mc terminal description uses magic cookies 9129# to correctly handle multiple attributes on a screen. 9130# 9131wy75|wyse75|wyse 75, 9132 am, hs, mc5i, mir, msgr, xenl, xon, 9133 cols#80, lines#24, ma#1, pb#1201, wsl#78, 9134 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9135 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>, 9136 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>, 9137 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 9138 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 9139 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, 9140 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>, 9141 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001, 9142 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, 9143 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A, 9144 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 9145 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, 9146 ind=\n$<2>, ip=$<1>, 9147 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h, 9148 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D, 9149 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, 9150 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 9151 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 9152 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i, 9153 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M, 9154 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 9155 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~, 9156 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i, 9157 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O, 9158 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, 9159 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l, 9160 sc=\E7, 9161 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;, 9162 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 9163 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m, 9164 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad, 9165# 9166# This terminal description uses the non-hidden attribute mode 9167# (with magic cookie). 9168# 9169wy75-mc|wyse75-mc|wyse 75 with magic cookies, 9170 msgr@, 9171 ma@, xmc#1, 9172 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p, 9173 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p, 9174 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;, 9175 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p, 9176 use=wy75, 9177wy75-vb|wyse75-vb|wyse 75 with visible bell, 9178 pb@, 9179 bel@, use=wy75, 9180wy75-w|wyse75-w|wyse 75 in 132 column mode, 9181 cols#132, wsl#130, 9182 rs2=\E[35h\E[?3h$<80>, use=wy75, 9183wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns, 9184 pb@, 9185 bel@, use=wy75-w, 9186# 9187# Wyse 85 emulating a vt220 7 bit mode. 9188# 24 line screen with status line. 9189# 9190# The vt220 mode permits more function keys but it wipes out 9191# the escape key. I strongly recommend that <f11> be set to 9192# escape (esc). 9193# The terminal may have to be set for 8 data bits and 2 stop 9194# bits for the arrow keys to work. 9195# The Wyse 85 runs faster with XON/XOFF enabled. Also the 9196# <dch> and <ich> work best when XON/XOFF is set. <ich> and 9197# <dch> leave trash on the screen when used without XON/XOFF. 9198# 9199wy85|wyse85|wyse 85, 9200 am, hs, mc5i, mir, msgr, xenl, xon, 9201 cols#80, it#8, lines#24, wsl#80, 9202 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9203 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9204 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, 9205 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9206 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9207 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 9208 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, 9209 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, 9210 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, 9211 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, 9212 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, 9213 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, 9214 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, 9215 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, 9216 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B, 9217 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~, 9218 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 9219 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 9220 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, 9221 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, 9222 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 9223 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, 9224 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, 9225 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, 9226 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, 9227 rs3=\E[?5l, sc=\E7, 9228 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9229 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 9230 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 9231 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad, 9232# 9233# Wyse 85 with visual bell. 9234wy85-vb|wyse85-vb|wyse 85 with visible bell, 9235 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85, 9236# 9237# Wyse 85 in 132-column mode. 9238wy85-w|wyse85-w|wyse 85 in 132-column mode, 9239 cols#132, wsl#132, 9240 rs2=\E[35h\E[?3h$<70>, use=wy85, 9241# 9242# Wyse 85 in 132-column mode with visual bell. 9243wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns, 9244 bel@, use=wy85-w, 9245 9246# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998 9247# This copes with an apparent firmware bug in the wy85. He writes: 9248# "What I did was change leave the terminal cursor keys set to Normal 9249# (instead of application), and change \E[ to \233 for all the keys in 9250# terminfo. At one point, I found some reference indicating that this 9251# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just 9252# me), but I can't find that and the server under my bookmark to "Wyse 9253# Technical" isn't responding. So there's the question of wether the wy85 9254# terminfo should reflect the manufactuer's intended behaviour of the terminal 9255# or the actual." 9256wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode, 9257 am, hs, mc5i, mir, msgr, xenl, xon, 9258 cols#80, it#8, lines#24, wsl#80, 9259 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9260 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9261 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, 9262 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9263 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9264 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 9265 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, 9266 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, 9267 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, 9268 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, 9269 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, 9270 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, 9271 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, 9272 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, 9273 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu, 9274 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B, 9275 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM, 9276 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, 9277 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~, 9278 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ, 9279 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, 9280 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~, 9281 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~, 9282 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, 9283 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, 9284 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, 9285 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, 9286 rs3=\E[?5l, sc=\E7, 9287 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;, 9288 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 9289 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 9290 tsl=\E[40h\E7\E[25;%i%p1%dH, 9291# 9292# Wyse 185 emulating a vt320 7 bit mode. 9293# 9294# This terminal always displays 25 lines. These lines may be used 9295# as 24 data lines and a terminal status line (top or bottom) or 9296# 25 data lines. The 48 and 50 line modes change the page size 9297# and not the number of lines on the screen. 9298# 9299# The Compose Character key can be used as a meta key if changed 9300# by set-up. 9301# 9302wy185|wyse185|wyse 185, 9303 am, hs, km, mc5i, mir, msgr, xenl, xon, 9304 cols#80, it#8, lines#24, wsl#80, 9305 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9306 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9307 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 9308 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, 9309 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9310 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9311 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>, 9312 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, 9313 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>, 9314 el=\E[K, el1=\E[1K, enacs=\E)0, 9315 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8, 9316 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH, 9317 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>, 9318 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, 9319 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h, 9320 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 9321 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, 9322 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 9323 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 9324 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, 9325 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 9326 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~, 9327 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, 9328 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, 9329 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, 9330 rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 9331 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, 9332 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, 9333 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9334 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, 9335 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, 9336 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd, 9337 use=vt220+keypad, 9338# 9339# Wyse 185 with 24 data lines and top status (terminal status) 9340wy185-24|wyse185-24|wyse 185 with 24 data lines, 9341 hs@, 9342 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 9343 use=wy185, 9344# 9345# Wyse 185 with visual bell. 9346wy185-vb|wyse185-vb|wyse 185+flash, 9347 bel@, use=wy185, 9348# 9349# Wyse 185 in 132-column mode. 9350wy185-w|wyse185-w|wyse 185 in 132-column mode, 9351 cols#132, wsl#132, 9352 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 9353 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185, 9354# 9355# Wyse 185 in 132-column mode with visual bell. 9356wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols, 9357 bel@, use=wy185-w, 9358 9359# wy325 terminfo entries 9360# Done by Joe H. Davis 3-9-92 9361 9362# lines 25 columns 80 9363# 9364wy325|wyse325|Wyse epc, 9365 am, bw, hs, mc5i, mir, 9366 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, 9367 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 9368 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, 9369 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 9370 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, 9371 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, 9372 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, 9373 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, 9374 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 9375 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 9376 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 9377 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 9378 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 9379 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 9380 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, 9381 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, 9382 mc0=\EP, mc4=^T, mc5=\Ed#, 9383 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 9384 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 9385 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, 9386 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11, 9387 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, 9388 rs3=\EwG\Ee($<100>, 9389 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 9390 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 9391 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0, 9392 tsl=\EF, use=adm+sgr, 9393 9394# 9395# lines 24 columns 80 vb 9396# 9397wy325-vb|wyse325-vb|wyse-325 with visual bell, 9398 bel@, use=wy325, 9399 9400# 9401# lines 24 columns 132 9402# 9403wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode, 9404 cols#132, lw#7, nlab#16, wsl#97, 9405 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, 9406 rs2=\E`;$<70>, use=wy325, 9407# 9408# lines 25 columns 80 9409# 9410wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines, 9411 lh@, lines#25, lw@, nlab@, 9412 pln@, rs3=\EwG\Ee)$<100>, use=wy325, 9413# 9414# lines 25 columns 132 9415# 9416wy325-25w|wyse325-25w|wy325 132 columns, 9417 lh@, lines#25, lw@, nlab@, 9418 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 9419# 9420# lines 25 columns 132 vb 9421# 9422wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video, 9423 bel@, use=wy325-w, 9424 9425# 9426# lines 42 columns 80 9427# 9428wy325-42|wyse325-42|wyse-325 42 lines, 9429 lh@, lines#42, lw@, nlab@, 9430 pln@, rs3=\EwG\Ee)$<100>, use=wy325, 9431# 9432# lines 42 columns 132 9433# 9434wy325-42w|wyse325-42w|wyse-325 42 lines wide mode, 9435 lh@, lines#42, lw@, nlab@, 9436 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 9437# 9438# lines 42 columns 132 vb 9439# 9440wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell, 9441 bel@, use=wy325-w, 9442# 9443# lines 43 columns 80 9444# 9445wy325-43|wyse325-43|wyse-325 43 lines, 9446 lh@, lines#43, lw@, nlab@, 9447 pln@, use=wy325, 9448# 9449# lines 43 columns 132 9450# 9451wy325-43w|wyse325-43w|wyse-325 43 lines wide mode, 9452 lh@, lines#43, lw@, nlab@, 9453 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 9454# 9455# lines 43 columns 132 vb 9456# 9457wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell, 9458 bel@, use=wy325-w, 9459 9460# Wyse 370 -- 24 line screen with status line. 9461# 9462# The terminal may have to be set for 8 data bits and 2 stop 9463# bits for the arrow keys to work. 9464# 9465# If you change keyboards the terminal will send different 9466# escape sequences. 9467# The following definition is for the basic terminal without 9468# function keys. 9469# 9470# <u0> -> enter Tektronix 4010/4014 mode 9471# <u1> -> exit Tektronix 4010/4014 mode 9472# <u2> -> enter ASCII mode (from any ANSI mode) 9473# <u3> -> exit ASCII mode (goto native ANSI mode) 9474# <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode) 9475# <u5> -> exit Tek 4207 mode (goto native ANSI mode) 9476# 9477# Bug: The <op> capability resets attributes. 9478wy370-nk|wyse 370 without function keys, 9479 am, ccc, hs, mc5i, mir, msgr, xenl, xon, 9480 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80, 9481 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9482 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9483 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 9484 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9485 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9486 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 9487 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>, 9488 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, 9489 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>, 9490 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0, 9491 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8, 9492 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH, 9493 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, 9494 ind=\n$<2>, 9495 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw, 9496 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>, 9497 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h, 9498 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i, 9499 mc5=\E[5i, 9500 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w, 9501 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, 9502 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l, 9503 rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 9504 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>, 9505 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw, 9506 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9507 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, 9508 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, 9509 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH, 9510 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B, 9511 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd, 9512# 9513# Function key set for the ASCII (wy-50 compatible) keyboard 9514# This is the default 370. 9515# 9516wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard, 9517 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 9518 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i, 9519 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 9520 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i, 9521 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, 9522 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP, 9523 knp=\E[U, kpp=\E[V, use=wy370-nk, 9524# 9525# Function key set for the VT-320 (and wy85) compatible keyboard 9526# 9527wy370-105k|Wyse 370 with 105 key keyboard, 9528 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 9529 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 9530 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 9531 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, 9532 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 9533 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, 9534 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, 9535 use=wy370-nk, use=vt220+keypad, 9536# 9537# Function key set for the PC compatible keyboard 9538# 9539wy370-EPC|Wyse 370 with 102 key keyboard, 9540 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 9541 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~, 9542 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 9543 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 9544 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk, 9545# 9546# Wyse 370 with visual bell. 9547wy370-vb|Wyse 370 with visible bell, 9548 bel@, use=wy370, 9549# 9550# Wyse 370 in 132-column mode. 9551wy370-w|Wyse 370 in 132-column mode, 9552 cols#132, wsl#132, 9553 rs2=\E[35h\E[?3h$<70>, use=wy370, 9554# 9555# Wyse 370 in 132-column mode with visual bell. 9556wy370-wvb|Wyse 370 with visible bell 132-columns, 9557 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w, 9558wy370-rv|Wyse 370 reverse video, 9559 rs3=\E[32h\E[?5h, use=wy370, 9560# 9561# Wyse 99gt Tektronix 4010/4014 emulator, 9562# 9563wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator, 9564 am, os, 9565 cols#74, lines#35, 9566 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, 9567 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, 9568 cuu1=^K, ff=^L, 9569 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, 9570 home=^]7`x @\037, 9571 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, 9572 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h, 9573# 9574# Wyse 160 Tektronix 4010/4014 emulator, 9575# 9576wy160-tek|Wyse 160 Tektronix 4010/4014 emulator, 9577 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, 9578 home=^]8`g @\037, use=wy99gt-tek, 9579# 9580# Wyse 370 Tektronix 4010/4014 emulator, 9581# 9582wy370-tek|Wyse 370 Tektronix 4010/4014 emulator, 9583 am, os, 9584 cols#80, lines#36, 9585 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, 9586 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037, 9587 cuu1=^K, ff=^L, 9588 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, 9589 home=^]8g @\037, 9590 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, 9591 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K, 9592 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0, 9593 9594# Vendor-supplied Wyse entries end here. 9595 9596# 9597#TITLE: TERMINFO ENTRY WY520 9598#DATE: 8/5/93 9599# The WY520 terminfo is based on the WY285 entry published on the WYSE 9600# BBS with the addition of more function keys and special keys. 9601# 9602# rs1 -> set personality 9603# rs2 -> set number of columns 9604# rs3 -> set number of lines 9605# is1 -> select the proper font 9606# is2 -> do the initialization 9607# is3 -> If this string is empty then rs3 gets sent. 9608# 9609# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard 9610# - The BS key is programmed to generate BS in smcup since 9611# is2 doesn't seem to work. 9612# - Remove and shift/Remove: delete a character 9613# - Insert : enter insert mode 9614# - Find : delete to end of file 9615# - Select : clear a line 9616# - F11, F12, F13: send default sequences (not ESC, BS, LF) 9617# - F14 : Home key 9618# - Bottom status line (host writable line) is used. 9619# - smkx,rmkx are removed because this would put the numeric 9620# keypad in Dec application mode which doesn't seem to work 9621# with SCO applications. 9622# 9623wy520|wyse520|wyse 520, 9624 am, hs, km, mc5i, mir, xenl, xon, 9625 cols#80, it#8, lines#24, wsl#80, 9626 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9627 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9628 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 9629 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, 9630 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9631 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9632 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>, 9633 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~, 9634 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K, 9635 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, 9636 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, 9637 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, 9638 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h, 9639 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 9640 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~, 9641 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~, 9642 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 9643 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 9644 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 9645 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, 9646 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, 9647 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 9648 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, 9649 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m, 9650 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, 9651 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, 9652 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9653 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, 9654 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m, 9655 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`, 9656 vpa=\E[%i%p1%dd, use=vt220+keypad, 9657# 9658# Wyse 520 with 24 data lines and status (terminal status) 9659wy520-24|wyse520-24|wyse 520 with 24 data lines, 9660 hs@, 9661 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 9662 use=wy520, 9663# 9664# Wyse 520 with visual bell. 9665wy520-vb|wyse520-vb|wyse 520 with visible bell, 9666 flash=\E[30h\E\,\E[30l$<100>, use=wy520, 9667# 9668# Wyse 520 in 132-column mode. 9669wy520-w|wyse520-w|wyse 520 in 132-column mode, 9670 cols#132, wsl#132, 9671 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 9672 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520, 9673# 9674# Wyse 520 in 132-column mode with visual bell. 9675wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns, 9676 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w, 9677# 9678# 9679# Wyse 520 emulating a vt420 7 bit mode. 9680# The DEL key is programmed to generate BS in is2. 9681# With EPC keyboard. 9682# - 'End' key will clear till end of line on EPC keyboard 9683# - Shift/End : ignored. 9684# - Insert : enter insert mode. 9685# - Delete : delete a character (have to change interrupt character 9686# to CTRL-C: stty intr '^c') for it to work since the 9687# Delete key sends 7FH. 9688wy520-epc|wyse520-epc|wyse 520 with EPC keyboard, 9689 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~, 9690 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H, 9691 use=wy520, 9692# 9693# Wyse 520 with 24 data lines and status (terminal status) 9694# with EPC keyboard. 9695wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard, 9696 hs@, 9697 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 9698 use=wy520-epc, 9699# 9700# Wyse 520 with visual bell. 9701wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard, 9702 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc, 9703# 9704# Wyse 520 in 132-column mode. 9705wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard, 9706 cols#132, wsl#132, 9707 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 9708 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc, 9709# 9710# Wyse 520 in 132-column mode with visual bell. 9711wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard, 9712 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w, 9713# 9714# Wyse 520 in 80-column, 36 lines 9715wy520-36|wyse520-36|wyse 520 with 36 data lines, 9716 hs@, 9717 lines#36, 9718 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, 9719 use=wy520, 9720# 9721# Wyse 520 in 80-column, 48 lines 9722wy520-48|wyse520-48|wyse 520 with 48 data lines, 9723 hs@, 9724 lines#48, 9725 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, 9726 use=wy520, 9727# 9728# Wyse 520 in 132-column, 36 lines 9729wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines, 9730 cols#132, wsl#132, 9731 rs2=\E[?3h, 9732 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, 9733 use=wy520-36, 9734# 9735# Wyse 520 in 132-column, 48 lines 9736wy520-48w|wyse520-48w|wyse 520 with 48 data lines, 9737 cols#132, wsl#132, 9738 rs2=\E[?3h, 9739 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, 9740 use=wy520-48, 9741# 9742# 9743# Wyse 520 in 80-column, 36 lines with EPC keyboard 9744wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard, 9745 hs@, 9746 lines#36, 9747 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, 9748 use=wy520-epc, 9749# 9750# Wyse 520 in 80-column, 48 lines with EPC keyboard 9751wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard, 9752 hs@, 9753 lines#48, 9754 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, 9755 use=wy520-epc, 9756# 9757# Wyse 520 in 132-column, 36 lines with EPC keyboard 9758wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard, 9759 cols#132, wsl#132, 9760 rs2=\E[?3h, 9761 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, 9762 use=wy520-36pc, 9763# 9764# Wyse 520 in 132-column, 48 lines with EPC keyboard 9765wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard, 9766 cols#132, wsl#132, 9767 rs2=\E[?3h, 9768 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, 9769 use=wy520-48pc, 9770 9771# From: John Gilmore <hoptoad!gnu@lll-crg.arpa> 9772# (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such 9773# file and we don't know what <hts> is -- esr) 9774wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on, 9775 OTbs, am, 9776 cols#80, it#8, lines#24, 9777 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 9778 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW, 9779 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J, 9780 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F, 9781 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O, 9782 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N, 9783 smul=^N, 9784 9785wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad, 9786 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=, 9787 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 9788 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>, 9789 use=wy75, 9790 9791# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu> 9792wy100q|Wyse 100 for Quotron, 9793 OTbs, 9794 cols#80, lines#24, xmc#1, 9795 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L, 9796 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 9797 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@, 9798 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J, 9799 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr, 9800 9801#### Kermit terminal emulations 9802# 9803# Obsolete Kermit versions may be listed in the section describing obsolete 9804# non-ANSI terminal emulators later in the file. 9805# 9806 9807# KERMIT standard all versions. 9808# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. 9809# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) 9810# From: greg small <gts@populi.berkeley.edu> 9-25-84 9811kermit|standard kermit, 9812 OTbs, 9813 cols#80, lines#24, 9814 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 9815 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 9816 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n, 9817 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 9818kermit-am|standard kermit plus auto-margin, 9819 am, 9820 is2=K1 Standard Kermit plus Automatic Margins\n, 9821 use=kermit, 9822# IBMPC Kermit 1.2. 9823# Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does 9824# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of 9825# line). 9826# From: greg small <gts@populi.berkeley.edu> 8-30-84 9827pckermit|pckermit12|UCB IBMPC Kermit 1.2, 9828 am, 9829 lines#25, 9830 clear=\EH\EJ, ed@, el@, 9831 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit, 9832# IBMPC Kermit 1.20 9833# Cannot use line 25, now acts funny like ansi special scrolling region. 9834# Initialization must escape from that region by cursor position to line 24. 9835# Cannot use character insert because 1.20 goes crazy if insert at col 80. 9836# Does not use :am: because autowrap is lost when kermit dropped and restarted. 9837# From: greg small <gts@populi.berkeley.edu> 12-19-84 9838pckermit120|UCB IBMPC Kermit 1.20, 9839 it#8, lines#24, 9840 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I, 9841 il1=\EL, 9842 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n, 9843 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit, 9844# MS-DOS Kermit 2.27 for the IBMPC 9845# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. 9846# Cannot use line 25, now acts funny like ansi special scrolling region. 9847# Initialization must escape from that region by cursor position to line 24. 9848# Does not use am: because autowrap is lost when kermit dropped and restarted. 9849# Reverse video for standout like H19. 9850# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) 9851# From: greg small <gts@populi.berkeley.edu> 3-17-85 9852msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC, 9853 OTbs, am@, 9854 cols#80, it#8, lines#24, 9855 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 9856 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 9857 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK, 9858 home=\EH, ht=^I, il1=\EL, 9859 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n, 9860 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek, 9861 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep, 9862# MS-DOS Kermit 2.27 with automatic margins 9863# From: greg small <gts@populi.berkeley.edu> 3-17-85 9864msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins, 9865 am, 9866 cvvis=\EO\Eq\EG\EvK5, 9867 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n, 9868 use=msk227, 9869# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC 9870# Automatic margins now default. Use ansi <sgr> for highlights. 9871# Define function keys. 9872# (msk22714: removed obsolete ":kn#10:" -- esr) 9873# From: greg small <gts@populi.berkeley.edu> 3-17-85 9874msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC, 9875 am, 9876 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6, 9877 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n, 9878 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, 9879 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m, 9880 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227, 9881# This was designed for a VT320 emulator, but it is probably a good start 9882# at support for the VT320 itself. 9883# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu. 9884# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr) 9885vt320-k3|MS-Kermit 3.00's vt320 emulation, 9886 am, eslok, hs, km, mir, msgr, xenl, 9887 cols#80, it#8, lines#49, pb#9600, vt#3, 9888 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9889 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 9890 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M, 9891 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9892 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9893 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9894 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 9895 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 9896 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l, 9897 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 9898 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 9899 is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD, 9900 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~, 9901 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 9902 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~, 9903 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8, 9904 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l, 9905 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 9906 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~, 9907 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 9908 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 9909 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, 9910# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991 9911# ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996 9912# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr) 9913vt320-k311|dec vt320 series as defined by kermit 3.11, 9914 am, eslok, hs, mir, msgr, xenl, xon, 9915 cols#80, it#8, lines#24, vt#3, 9916 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9917 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 9918 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M, 9919 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9920 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9921 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9922 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 9923 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, 9924 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH, 9925 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED, 9926 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 9927 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 9928 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 9929 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 9930 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 9931 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O, 9932 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 9933 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, 9934 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, 9935 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, 9936 9937######## NON-ANSI TERMINAL EMULATIONS 9938# 9939 9940#### Avatar 9941# 9942# These entries attempt to describe Avatar, a terminal emulation used with 9943# MS-DOS bulletin-board systems. It was designed to give ANSI-like 9944# capabilities, but with cheaper (shorter) control sequences. Messy design, 9945# excessively dependent on PC idiosyncracies, but apparently rather popular 9946# in the BBS world. 9947# 9948# No color support. Avatar doesn't fit either of the Tektronix or HP color 9949# models that terminfo knows about. An Avatar color attribute is the 9950# low 7 bits of the IBM-PC display-memory attribute. Bletch. 9951# 9952# I wrote these entries while looking at the Avatar spec. I don't have 9953# the facilities to test them. Let me know if they work, or don't. 9954# 9955# Avatar escapes not used by these entries (because maybe you're smarter 9956# and more motivated than I am and can figure out how to wrap terminfo 9957# around some of them, and because they are weird enough to be funny): 9958# level 0: 9959# ^L -- clear window/reset current attribute to default 9960# ^V^A%p1%c -- set current color attribute, parameter decodes as follows: 9961# 9962# bit: 6 5 4 3 2 1 0 9963# | | | | | 9964# +---+---+ | +---+---+ 9965# | | | 9966# | | foreground color 9967# | foreground intensity 9968# background color 9969# level 0+: 9970# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines 9971# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines 9972# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1 9973# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1 9974# (^V^L and ^V^M set the current attribute as a side-effect.) 9975# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes 9976# in the pattern, <c> the number of times the pattern 9977# should be repeated. If either value is 0, no-op. 9978# The pattern can contain Avatar console codes, 9979# including other ^V ^Y patterns. 9980# level 1: 9981# ^V^O -- clockwise mode on; turn print direction right each time you 9982# hit a window edge (yes, really). Turned off by CR 9983# ^V^P -- no-op 9984# ^V^Q%c -- query the driver 9985# ^V^R -- driver reset 9986# ^V^S -- Sound tone (PC-specific) 9987# ^V^T -- change highlight at current cursor poition to %c 9988# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b> 9989# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c 9990# -- define window 9991# 9992# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 9993# (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to 9994# tell ncurses that the corresponding highlights exist; it should use <sgr>, 9995# which is the only method that will actually work for multiple highlights.) 9996# 9997# Update by TD - 2004: half of this was inconsistent. Found documentation 9998# and repaired most of the damage. sgr0 is probably incorrect, but the 9999# available documentation gives no clues for a workable string. 10000avatar0|avatar terminal emulator level 0, 10001 am, bce, msgr, 10002 cols#80, it#8, lines#25, 10003 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D, 10004 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G, 10005 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap, 10006 rmacs@, rs2=^L, 10007 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;, 10008 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A, 10009 use=klone+acs, 10010# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 10011avatar0+|avatar terminal emulator level 0+, 10012 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0, 10013# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 10014avatar|avatar1|avatar terminal emulator level 1, 10015 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+, 10016 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+, 10017 10018#### RBcomm 10019# 10020# RBComm is a lean and mean terminal emulator written by the Interrupt List 10021# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early 10022# '90s), especially in the BBS world, and still has some loyal users due to 10023# its very small memory footprint and to a cute macro language. 10024rbcomm|IBM PC with RBcomm and EMACS keybindings, 10025 am, bw, mir, msgr, xenl, 10026 cols#80, it#8, lines#25, 10027 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 10028 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 10029 cub1=^H, cud1=^C, cuf1=^B, 10030 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W, 10031 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I, 10032 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m, 10033 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H, 10034 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED, 10035 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=, 10036 rmir=^], rmkx=\E>, rmso=^U, rmul=^U, 10037 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m, 10038 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T, 10039rbcomm-nam|IBM PC with RBcomm without autowrap, 10040 am@, 10041 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, 10042 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H, 10043 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm, 10044rbcomm-w|IBM PC with RBcomm in 132 column mode, 10045 cols#132, 10046 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, 10047 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H, 10048 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm, 10049 10050######## LCD DISPLAYS 10051# 10052 10053#### Matrix Orbital 10054# from: Eric Z. Ayers (eric@ale.org) 10055# 10056# Matrix Orbital 20x4 LCD display 10057# Command Character is 0xFE (decimal 254, octal 376) 10058# 10059# On this device, cursor addressability isn't possible. The LCD expects: 10060# 0xfe G <col> <row> 10061# for cup: %p1 == row and %p2 is column 10062# 10063# This line: 10064# cup=\376G%p2%c%p1%c 10065# LOOKS like it will work, but sometimes only one of the two numbers is sent. 10066# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'. 10067# 10068# Alas, there is no cursor upline capability on this display. 10069# 10070# These entries add some 'sanity stuff' to the clear function. That is, it 10071# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping, 10072# and turns off the cursor blinking and stuff like that. 10073# 10074# NOTE: calling 'beep' turns on the backlight (bell) 10075# NOTE: calling 'flash' turns it on and back off (visual bell) 10076# 10077MtxOrb|Generic Matrix Orbital LCD display, 10078 bel=\376B^A, clear=\376X\376C\376R\376K\376T, 10079 cnorm=\376K\376T, cub1=\376L, cuf1=\376M, 10080 flash=\376B\001$<200>\376F, home=\376H, 10081MtxOrb204|20x4 Matrix Orbital LCD display, 10082 cols#20, lines#4, use=MtxOrb, 10083MtxOrb162|16x2 Matrix Orbital LCD display, 10084 cols#16, lines#2, use=MtxOrb, 10085# The end 10086 10087######## OLDER TERMINAL TYPES 10088# 10089# This section is devoted to older commercial terminal brands that are now 10090# discontinued, but known to be still in use or represented by emulations. 10091# 10092 10093#### AT&T (att, tty) 10094# 10095# This section also includes Teletype-branded VDTs. 10096# 10097# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now 10098# Boundless Technologies); for details, see the header comment on the ADDS 10099# section. 10100# 10101# These are AT&T's official terminfo entries. All-caps aliases have been 10102# removed. 10103# 10104att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode, 10105 am, eo, mir, msgr, xon, 10106 cols#80, it#8, lines#24, 10107 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, 10108 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 10109 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10110 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 10111 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 10112 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J, 10113 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 10114 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r, 10115 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r, 10116 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r, 10117 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H, 10118 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 10119 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h, 10120 smso=\E[7m, 10121att2350|AT&T 2350 Video Information Terminal 80 column mode, 10122 mc0@, mc4@, mc5@, use=att2300, 10123 10124# Must setup RETURN KEY - CR, REC'VD LF - INDEX. 10125# Seems upward compatible with vt100, plus ins/del line/char. 10126# On sgr, the protection parameter is ignored. 10127# No check is made to make sure that only 3 parameters are output. 10128# standout= reverse + half-intensity = 3 | 5. 10129# bold= reverse + underline = 2 | 3. 10130# note that half-bright blinking doesn't look different from normal blinking. 10131# NOTE:you must program the function keys first, label second! 10132# (att4410: a BSD entry has been seen with the following capabilities: 10133# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>, 10134# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr) 10135att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1, 10136 am, hs, mir, msgr, xon, 10137 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 10138 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10139 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M, 10140 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 10141 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m, 10142 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I, 10143 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0, 10144 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW, 10145 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10146 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, 10147 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, 10148 ll=\E[24H, nel=^M^J, 10149 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s, 10150 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, 10151 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, 10152 sc=\E7, 10153 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10154 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, 10155 tsl=\E7\E[25;%p1%{1}%+%dH, 10156 10157att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1, 10158 cols#132, wsl#132, 10159 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1, 10160 10161att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2, 10162 OTbs, 10163 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s, 10164 use=att5410v1, 10165 10166att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode, 10167 cols#132, wsl#132, 10168 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410, 10169 10170# 5410 in terms of a vt100 10171# (v5410: added <rmam>/<smam> based on init string -- esr) 10172v5410|att5410 in terms of a vt100, 10173 am, mir, msgr, xon, 10174 cols#80, it#8, lines#24, vt#3, 10175 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10176 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 10177 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 10178 cub1=^H, cud1=^J, cuf1=\E[C$<2>, 10179 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P, 10180 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 10181 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@, 10182 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 10183 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, 10184 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, 10185 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 10186 sc=\E7, 10187 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 10188 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 10189 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 10190 use=vt100+fnkeys, 10191 10192# 10193# Teletype Model 5420 -- A souped up 5410, with multiple windows, 10194# even! the 5420 has three modes: scroll, window or page mode 10195# this terminfo should work in scroll or window mode, but doesn't 10196# take advantage of any of the differences between them. 10197# 10198# Has memory below (2 lines!) 10199# 3 pages of memory (plus some spare) 10200# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>, 10201# <hpa>, <hts> would work for these, but these work in both scroll and window 10202# mode... Unset insert character so insert mode works 10203# <is1> sets 80 column mode, 10204# <is2> escape sequence: 10205# 1) turn off all fonts 10206# 2) function keys off, keyboard lock off, control display off, 10207# insert mode off, erasure mode off, 10208# 3) full duplex, monitor mode off, send graphics off, nl on lf off 10209# 4) reset origin mode 10210# 5) set line wraparound 10211# 6) exit erasure mode, positional attribute mode, and erasure extent mode 10212# 7) clear margins 10213# 8) program ENTER to transmit ^J, 10214# We use \212 to program the ^J because a bare ^J will get translated by 10215# UNIX into a CR/LF. The enter key is needed for AT&T uOMS. 10216# 1 2 3 4 5 6 7 8 10217# <is3> set screen color to black, 10218# No representation in terminfo for the delete word key: kdw1=\Ed 10219# Key capabilities assume the power-up send sequence... 10220# This <rmcup> is not strictly necessary, but it helps maximize 10221# memory usefulness: <rmcup=\Ez>, 10222# Alternate sgr0: <sgr0=\E[m\EW^O>, 10223# Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>, 10224# smkx programs the SYS PF keys to send a set sequence. 10225# It also sets up labels f1, f2, ..., f8, and sends edit keys. 10226# This string causes them to send the strings <kf1>-<kf8> 10227# when pressed in SYS PF mode. 10228# (att4415: I added <rmam>/<smam> based on the init string -- esr) 10229att4415|tty5420|att5420|AT&T 4415/5420 80 cols, 10230 OTbs, db, mir, xon, 10231 lh#2, lm#78, lw#8, nlab#8, wsl#55, 10232 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD, 10233 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx, 10234 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP, 10235 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD, 10236 flash=\E[?5h$<200>\E[?5l, home=\E[x, 10237 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@, 10238 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>, 10239 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212, 10240 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M, 10241 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd, 10242 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 10243 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, 10244 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 10245 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i, 10246 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt, 10247 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s, 10248 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, 10249 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l, 10250 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|, 10251 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10252 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h, 10253 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g, 10254 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, 10255 use=att4410, 10256 10257att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols, 10258 cols#132, lm#54, wsl#97, 10259 is1=\E[?3h$<100>, use=att4415, 10260 10261att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv, 10262 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415, 10263 10264att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv, 10265 cols#132, lm#54, wsl#97, 10266 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h, 10267 use=att4415, 10268 10269# Note that this mode permits programming USER PF KEYS and labels 10270# However, when you program user pf labels you have to reselect 10271# user pf keys to make them appear! 10272att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels, 10273 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, 10274 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s, 10275 pln=\E[%p1%d;0;0;1q%p2%:-16.16s, 10276 10277att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels, 10278 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 10279 use=att4415, 10280 10281att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels, 10282 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 10283 use=att4415-rv, 10284 10285att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels, 10286 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 10287 use=att4415-w, 10288 10289att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels, 10290 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 10291 use=att4415-w-rv, 10292 10293att5420_2|AT&T 5420 model 2 80 cols, 10294 am, db, hs, mir, msgr, xon, 10295 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, 10296 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10297 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j, 10298 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10299 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 10300 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, 10301 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 10302 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, 10303 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, 10304 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, 10305 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 10306 indn=\E[%p1%dE, invis=\E[8m, 10307 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, 10308 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, 10309 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, 10310 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe, 10311 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, 10312 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, 10313 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 10314 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i, 10315 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J, 10316 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~, 10317 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8, 10318 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j, 10319 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, 10320 sc=\E7, 10321 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10322 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~, 10323 smso=\E[7m, smul=\E[4m, tbc=\E[3g, 10324 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, 10325att5420_2-w|AT&T 5420 model 2 in 132 column mode, 10326 cols#132, 10327 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, 10328 use=att5420_2, 10329 10330att4418|att5418|AT&T 5418 80 cols, 10331 am, xon, 10332 cols#80, lines#24, 10333 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10334 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, 10335 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 10336 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 10337 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, 10338 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, 10339 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J, 10340 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@, 10341 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h, 10342 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I, 10343 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E, 10344 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j, 10345 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8, 10346 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7, 10347 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, 10348att4418-w|att5418-w|AT&T 5418 132 cols, 10349 cols#132, 10350 is1=\E[?3h, use=att5418, 10351 10352att4420|tty4420|teletype 4420, 10353 OTbs, da, db, eo, msgr, ul, xon, 10354 cols#80, lines#24, lm#72, 10355 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC, 10356 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, 10357 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s, 10358 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC, 10359 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH, 10360 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET, 10361 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~, 10362 rmul=\EZ, smdc@, smso=\E}, smul=\E\\, 10363 10364# The following is a terminfo entry for the Teletype 4424 10365# asynchronous keyboard-display terminal. It supports 10366# the vi editor. The terminal must be set up as follows, 10367# 10368# HIGHLIGHT DEFINITION 3-TONE 10369# DISPLAY FUNCTION GROUP III 10370# 10371# The second entry below provides limited (a la adm3a) 10372# operation under GROUP II. 10373# 10374# This must be used with DISPLAY FUNCTION GROUP I or III 10375# and HIGHLIGHT DEFINITION 3-TONE 10376# The terminal has either bold or blink, depending on options 10377# 10378# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr) 10379att4424|tty4424|teletype 4424, 10380 OTbs, am, xon, 10381 cols#80, lines#24, 10382 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10383 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M, 10384 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10385 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC, 10386 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA, 10387 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM, 10388 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 10389 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h, 10390 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10391 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 10392 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~, 10393 rmul=\EZ, 10394 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m, 10395 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\, 10396 tbc=\EF, 10397 10398att4424-1|tty4424-1|teletype 4424 in display function group I, 10399 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@, 10400 use=att4424, 10401 10402# This entry is not one of AT&T's official ones, it was translated from the 10403# 4.4BSD termcap file. The highlight strings are different from att4424. 10404# I have no idea why this is -- older firmware version, maybe? 10405# The following two lines are the comment originally attached to the entry: 10406# This entry appears to avoid the top line - I have no idea why. 10407# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp 10408att4424m|tty4424m|teletype 4424M, 10409 am, da, db, mir, 10410 cols#80, it#8, lines#23, 10411 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 10412 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP, 10413 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>, 10414 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B, 10415 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 10416 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m, 10417 sgr0=\E[m, smso=\E[7m, smul=\E[4m, 10418 10419# The Teletype 5425 is really version 2 of the Teletype 5420. It 10420# is quite similar, except for some minor differences. No page 10421# mode, for example, so all of the <cup> sequences used above have 10422# to change back to what's being used for the 5410. Many of the 10423# option settings have changed their numbering as well. 10424# 10425# This has been tested on a preliminary model. 10426# 10427# (att5425: added <rmam>/<smam> based on the init string -- esr) 10428att5425|tty5425|att4425|AT&T 4425/5425, 10429 am, da, db, hs, mir, msgr, xenl, xon, 10430 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, 10431 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10432 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 10433 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M, 10434 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10435 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 10436 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10437 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 10438 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J, 10439 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 10440 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, 10441 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 10442 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE, 10443 invis=\E[8m, is1=\E<\E[?3l$<100>, 10444 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212, 10445 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J, 10446 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 10447 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, 10448 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, 10449 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T, 10450 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i, 10451 nel=^M^J, 10452 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 10453 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8, 10454 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l, 10455 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|, 10456 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, 10457 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10458 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 10459 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m, 10460 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, 10461 vpa=\E[%p1%{1}%+%dd, 10462 10463att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels, 10464 smkx=\E[21;1j\E[25;4j\Eent, use=att4425, 10465 10466att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode, 10467 cols#132, lm#54, wsl#97, 10468 is1=\E[?3h$<100>, use=tty5425, 10469 10470# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:. 10471# I also added <rmam>/<smam> -- esr) 10472att4426|tty4426|teletype 4426S, 10473 am, da, db, xon, 10474 cols#80, lines#24, lm#48, 10475 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10476 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V, 10477 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 10478 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 10479 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP, 10480 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H, 10481 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^, 10482 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS, 10483 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, 10484 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 10485 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 10486 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H, 10487 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT, 10488 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, 10489 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0, 10490 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g, 10491 vpa=\E[%p1%dd, 10492 10493# Terminfo entry for the AT&T 510 A Personal Terminal 10494# Function keys 9 - 16 are available only after the 10495# screen labeled (soft keys/action blocks) are labeled. Function key 10496# 9 corresponds to the leftmost touch target on the screen, 10497# function key 16 corresponds to the rightmost. 10498# 10499# This entry is based on one done by Ernie Rice at Summit, NJ and 10500# changed by Anne Gallup, Skokie, IL, ttrdc!anne 10501att510a|bct510a|AT&T 510A Personal Terminal, 10502 am, mir, msgr, xenl, xon, 10503 cols#80, lh#2, lines#24, lw#7, nlab#8, 10504 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 10505 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 10506 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, 10507 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 10508 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 10509 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, 10510 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, 10511 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I, 10512 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l, 10513 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, 10514 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, 10515 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, 10516 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, 10517 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, 10518 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE, 10519 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, 10520 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7, 10521 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;, 10522 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m, 10523 smul=\E[4m, tbc=\E[3g, 10524 10525# Terminfo entry for the AT&T 510 D Personal Terminal 10526# Function keys 9 through 16 are accessed by bringing up the 10527# system blocks. 10528# Function key 9 corresponds to the leftmost touch target on the screen, 10529# function key 16 corresponds to the rightmost. 10530# 10531# There are problems with soft key labeling. These are due to 10532# strangenesses in the native terminal that are impossible to 10533# describe in a terminfo. 10534att510d|bct510d|AT&T 510D Personal Terminal, 10535 am, da, db, mir, msgr, xenl, xon, 10536 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8, 10537 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 10538 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 10539 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD, 10540 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 10541 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 10542 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P, 10543 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, 10544 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, 10545 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 10546 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, 10547 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, 10548 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 10549 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, 10550 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, 10551 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, 10552 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, 10553 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE, 10554 pln=\E[%p1%dp%p2%:-16s, rc=\E8, 10555 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, 10556 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, 10557 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|, 10558 rs2=\E[5;0|, sc=\E7, 10559 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10560 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h, 10561 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m, 10562 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 10563 10564# (att500: I merged this with the att513 entry, att500 just used att513 -- esr) 10565att500|att513|AT&T 513 using page mode, 10566 am, chts, mir, msgr, xenl, xon, 10567 cols#80, lh#2, lines#24, lw#8, nlab#8, 10568 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 10569 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 10570 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M, 10571 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10572 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 10573 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10574 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m, 10575 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 10576 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, 10577 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 10578 indn=\E[%p1%dE, invis=\E[8m, 10579 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l, 10580 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 10581 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 10582 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK, 10583 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, 10584 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY, 10585 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw, 10586 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, 10587 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 10588 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent, 10589 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, 10590 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, 10591 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi, 10592 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, 10593 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, 10594 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB, 10595 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2, 10596 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i, 10597 nel=\EE, 10598 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s, 10599 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s, 10600 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s, 10601 pln=\E[%p1%dp%p2%:-16s, rc=\E8, 10602 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, 10603 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, 10604 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m, 10605 rmul=\E[m, 10606 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l, 10607 rs2=\E[5;0|, sc=\E7, 10608 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10609 sgr0=\E[m\017, smacs=^N, smir=\E[4h, 10610 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m, 10611 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 10612 10613# 01-07-88 10614# printer must be set to EMUL ANSI to accept ESC codes 10615# <cuu1> stops at top margin 10616# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font 10617# and alt font ascii,wrap on,tabs cleared 10618# <is2> disables newline on LF,Emphasized off 10619# The <u0> capability sets form length 10620att5310|att5320|AT&T Model 53210 or 5320 matrix printer, 10621 xhpa, xvpa, 10622 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10, 10623 orhi#100, orl#12, orvi#72, 10624 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;, 10625 cr=^M, 10626 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;, 10627 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM, 10628 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r, 10629 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;, 10630 rshm=\E[m, 10631 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;, 10632 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds, 10633 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m, 10634 u0=\E[%p1%dt, vpa=\E[%p1%dd, 10635 10636# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL 10637# The following SET-UP modes are assumed for normal operation: 10638# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL 10639# Other SET-UP modes may be set for operator convenience or communication 10640# requirements. This termcap description is for the Resident Terminal Mode. 10641# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 10642# The BRL entry also said: UNSAFE :ll=\E[70H: 10643att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs, 10644 am, xon, 10645 cols#88, it#8, lines#70, vt#3, 10646 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 10647 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 10648 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 10649 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 10650 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, 10651 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 10652 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT, 10653 rs1=\Ec, sc=\E7, 10654 10655# 5620 terminfo (2.0 or later ROMS with char attributes) 10656# The following SET-UP modes are assumed for normal operation: 10657# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR 10658# Other SET-UP modes may be set for operator convenience or communication 10659# requirements. This termcap description is for Resident Terminal Mode. No 10660# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 10661# assumptions: <ind> (scroll forward one line) is only done at screen bottom 10662# Be aware that older versions of the dmd have a firmware bug that affects 10663# parameter defaulting; for this terminal, the 0 in \E[0m is not optional. 10664# <msgr> is from an otherwise inferior BRL for this terminal. That entry 10665# also has <ll>=\E[70H commented out and marked unsafe. 10666# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>. 10667att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns, 10668 OTbs, am, msgr, npc, xon, 10669 cols#88, it#8, lines#70, 10670 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H, 10671 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 10672 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 10673 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@, 10674 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 10675 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, 10676 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J, 10677 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T, 10678 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, 10679 sgr0=\E[0m, smso=\E[7m, smul=\E[4m, 10680att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer, 10681 lines#24, use=att5620, 10682att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer, 10683 lines#34, use=att5620, 10684# 5620 layer running the "S" system's downloaded graphics handler: 10685att5620-s|tty5620-s|layer|vitty|5620 S layer, 10686 OTbs, OTpt, am, 10687 cols#80, it#8, lines#72, 10688 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, 10689 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED, 10690 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J, 10691 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 10692 kll=\E[70;1H, 10693 10694# Entries for <kf15> thru <kf28> refer to the shifted system pf keys. 10695# 10696# Entries for <kf29> thru <kf46> refer to the alternate keypad mode 10697# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER 10698att605|AT&T 605 80 column 102key keyboard, 10699 am, eo, xon, 10700 cols#80, lines#24, lw#8, nlab#8, wsl#80, 10701 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10702 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 10703 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, 10704 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 10705 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 10706 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 10707 il1=\E[L, ind=^J, invis=\E[8m, 10708 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017, 10709 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J, 10710 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 10711 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq, 10712 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, 10713 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, 10714 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, 10715 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, 10716 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, 10717 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, 10718 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, 10719 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, 10720 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@, 10721 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H, 10722 mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 10723 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 10724 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 10725 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, 10726 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016, 10727 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, 10728 tsl=\E7\E[25;%i%p1%dx, 10729att605-pc|ATT 605 in pc term mode, 10730 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 10731 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, 10732 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z, 10733 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 10734 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N, 10735 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, 10736 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I, 10737 rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g, 10738 xonc=e, use=att605, 10739att605-w|AT&T 605-w 132 column 102 key keyboard, 10740 cols#132, wsl#132, 10741 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, 10742 use=att605, 10743# (att610: I added <rmam>/<smam> based on the init string. I also 10744# added <indn> and <rin> because the BSD file says the att615s have them, 10745# and the 615 is like a 610 with a big keyboard, and most of their other 10746# smart terminals support the same sequence -- esr) 10747att610|AT&T 610; 80 column; 98key keyboard, 10748 am, eslok, hs, mir, msgr, xenl, xon, 10749 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 10750 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10751 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 10752 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 10753 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10754 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 10755 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10756 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 10757 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 10758 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, 10759 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 10760 indn=\E[%p1%dS, invis=\E[8m, 10761 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0, 10762 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, 10763 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10764 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 10765 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, 10766 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 10767 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, 10768 nel=\EE, 10769 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 10770 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 10771 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 10772 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7, 10773 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10774 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 10775 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx, 10776att610-w|AT&T 610; 132 column; 98key keyboard, 10777 cols#132, wsl#132, 10778 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 10779 use=att610, 10780 10781att610-103k|AT&T 610; 80 column; 103key keyboard, 10782 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 10783 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 10784 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, 10785 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, 10786 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, 10787 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 10788 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, 10789 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx, 10790 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl, 10791 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, 10792 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq, 10793 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo, 10794 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610, 10795att610-103k-w|AT&T 610; 132 column; 103key keyboard, 10796 cols#132, wsl#132, 10797 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 10798 use=att610-103k, 10799att615|AT&T 615; 80 column; 98key keyboard, 10800 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, 10801 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, 10802 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, 10803 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, 10804 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, 10805 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, 10806 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610, 10807att615-w|AT&T 615; 132 column; 98key keyboard, 10808 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, 10809 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, 10810 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, 10811 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, 10812 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, 10813 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, 10814 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w, 10815att615-103k|AT&T 615; 80 column; 103key keyboard, 10816 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k, 10817att615-103k-w|AT&T 615; 132 column; 103key keyboard, 10818 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w, 10819# (att620: I added <rmam>/<smam> based on the init string and 10820# <rin>/<indn> from a BSD termcap -- esr) 10821att620|AT&T 620; 80 column; 98key keyboard, 10822 am, eslok, hs, mir, msgr, xenl, xon, 10823 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 10824 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10825 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 10826 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 10827 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10828 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 10829 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10830 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 10831 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 10832 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, 10833 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 10834 indn=\E[%p1%dS, invis=\E[8m, 10835 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h, 10836 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, 10837 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10838 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 10839 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, 10840 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI, 10841 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, 10842 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ, 10843 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, 10844 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf, 10845 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, 10846 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 10847 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H, 10848 mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 10849 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 10850 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 10851 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l, 10852 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, 10853 rs2=\Ec\E[?3l, sc=\E7, 10854 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10855 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h, 10856 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, 10857 tsl=\E7\E[25;%i%p1%dx, 10858att620-w|AT&T 620; 132 column; 98key keyboard, 10859 cols#132, wsl#132, 10860 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 10861 use=att620, 10862att620-103k|AT&T 620; 80 column; 103key keyboard, 10863 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 10864 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 10865 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, 10866 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, 10867 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, 10868 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 10869 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, 10870 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, 10871 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@, 10872 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@, 10873 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@, 10874 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, 10875 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, 10876 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, 10877 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, 10878 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620, 10879 10880att620-103k-w|AT&T 620; 132 column; 103key keyboard, 10881 cols#132, wsl#132, 10882 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 10883 use=att620-103k, 10884 10885# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal 10886# The following SETUP modes are assumed for normal operation: 10887# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF 10888# Font_Size=Large Non-Layers_Window_Cols=80 10889# Non-Layers_Window_Rows=60 10890# Other SETUP modes may be set for operator convenience or communication 10891# requirements. Some capabilities assume a printer attached to the Aux EIA 10892# port. This termcap description is for the Fixed Non-Layers Window. No 10893# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 10894# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr) 10895att630|AT&T 630 windowing terminal, 10896 OTbs, am, da, db, mir, msgr, npc, xon, 10897 cols#80, it#8, lines#60, lm#0, 10898 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M, 10899 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 10900 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 10901 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 10902 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 10903 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 10904 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m, 10905 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, 10906 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M, 10907 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, 10908 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy, 10909 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~, 10910 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i, 10911 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, 10912 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m, 10913 rmul=\E[m, rs2=\Ec, sc=\E7, 10914 sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m, 10915 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, 10916att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines, 10917 lines#24, use=att630, 10918 10919# This is the att700 entry for 700 native emulation of the AT&T 700 10920# terminal. Comments are relative to changes from the 605V2 entry and 10921# att730 on which the entry is based. Comments show the terminfo 10922# capability name, termcap name, and description. 10923# 10924# Here is what's going onm in the init string: 10925# ESC [ 50;4| set 700 native mode (really is 605) 10926# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line) 10927# ESC [ 53;0| set GenFlow to Xon/Xoff 10928# ESC [ 8 ;0| set CR on NL 10929# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h) 10930# ESC [ ? 4 l jump scroll 10931# ESC [ ? 5 l/h video: normal (l); reverse (h) 10932# ESC [ ?13 l Labels on 10933# ESC [ ?15 l parity check = no 10934# ESC [ 13 l monitor mode off 10935# ESC [ 20 l LF on NL (not CRLF on NL) 10936# ESC [ ? 7 h autowrap on 10937# ESC [ 12 h local echo off 10938# ESC ( B GO = ASCII 10939# ESC ) 0 G1 = Special Char & Line Drawing 10940# ESC [ ? 31 l Set 7 bit controls 10941# 10942# Note: Most terminals, especially the 600 family use Reverse Video for 10943# standout mode. DEC also uses reverse video. The VT100 uses bold in addition 10944# Assume we should stay with reverse video for 70.. However, the 605V2 exits 10945# standout mode with \E[m (all normal attributes). The 730 entry simply 10946# exits reverse video which would leave other current attributes intact. It 10947# was assumed the 730 entry to be more correct so rmso has changed. The 10948# 605V2 has no sequences to turn individual attributes off, thus its setting 10949# and the rmso/smso settings from the 730. 10950# 10951# Note: For the same reason as above in rmso I changed exit under-score mode 10952# to specifically turn off underscore, rather than return to all normal 10953# attributes 10954# 10955# Note: The following pkey_xmit is taken from the 605V2 which contained the 10956# capability as pfxl. It was changed here to pfx since pfxl 10957# will only compile successfully with Unix 4.0 tic. Also note that pfx only 10958# allows strings to be parameters and label values must be programmed as 10959# constant strings. Supposedly the pfxl of Version 4.0 allows both labels 10960# and strings to be parameters. The 605V2 pfx entry should be examined later 10961# in this regard. For reference the 730 pfxl entry is shown here for comparison 10962# 730 pfx entry: 10963# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s 10964# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s, 10965# 10966# (for 4.0 tic) 10967# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 10968# 10969# (for <4.0 tic) 10970# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 10971# 10972# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9 10973# 10974# Port1 Interface 10975# 10976# modular 10 pin Connector 10977# Left side Right side 10978# Pin 1 2 3 4 5 6 7 8 9 10 10979# 10980# Key (notch) at bottom 10981# 10982# Pin 1 DSR 10983# 3 DCD 10984# 4 DTR 10985# 5 Sig Ground 10986# 6 RD 10987# 7 SD 10988# 8 CTS 10989# 9 RTS 10990# 10 Frame Ground 10991# 10992# The manual is 189 pages and is loaded with details about the escape codes, 10993# etc..... Available from AT&T CIC 800-432-6600... 10994# ask for Document number 999-300-660.. 10995# 10996att700|AT&T 700 24x80 column display w/102key keyboard, 10997 am, eslok, hs, mir, msgr, xenl, xon, 10998 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 10999 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11000 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 11001 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 11002 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11003 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11004 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11005 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 11006 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 11007 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4, 11008 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 11009 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, 11010 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017, 11011 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, 11012 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 11013 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, 11014 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, 11015 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, 11016 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, 11017 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq, 11018 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu, 11019 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu, 11020 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, 11021 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, 11022 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 11023 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H, 11024 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 11025 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 11026 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, 11027 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, 11028 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m, 11029 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7, 11030 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 11031 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m, 11032 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g, 11033 tsl=\E7\E[99;%i%p1%dx, 11034 11035# This entry was modified 3/13/90 by JWE. 11036# fixes include additions of <enacs>, correcting <rep>, and modification 11037# of <kHOM>. (See comments below) 11038# att730 has status line of 80 chars 11039# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>, 11040# the <kf25> and up keys are used for shifted system Fkeys 11041# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is 11042# currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1 11043# and 122 key keyboards, the 730's translation is \E[2J. For consistency 11044# <kHOM> has been commented out. The user can uncomment <kHOM> if using the 11045# 102, 102+1, or 122 key keyboards 11046# kHOM=\E[2J, 11047# (att730: I added <rmam>/<smam> based on the init string -- esr) 11048att730|AT&T 730 windowing terminal, 11049 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon, 11050 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80, 11051 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11052 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 11053 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 11054 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11055 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11056 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11057 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 11058 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 11059 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8, 11060 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 11061 ind=\ED, invis=\E[8m, 11062 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B, 11063 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, 11064 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 11065 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 11066 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw, 11067 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{, 11068 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD, 11069 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH, 11070 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ, 11071 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf, 11072 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ, 11073 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg, 11074 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 11075 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T, 11076 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 11077 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s, 11078 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s, 11079 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, 11080 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, 11081 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m, 11082 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7, 11083 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 11084 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 11085 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h, 11086 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,