1######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
2#
3# This version of terminfo.src is distributed with ncurses and is maintained
4# by Thomas E. Dickey (TD).
5#
6# Report bugs and new terminal descriptions to
7#	bug-ncurses@gnu.org
8#
9#	$Revision: 1.399 $
10#	$Date: 2011/08/20 20:52:51 $
11#
12# The original header is preserved below for reference.  It is noted that there
13# is a "newer" version which differs in some cosmetic details (but actually
14# stopped updates several years ago); we have decided to not change the header
15# unless there is also a change in content.
16#
17# To further muddy the waters, it is noted that changes to this file as part of
18# maintenance of ncurses (since 1996) are generally conceded to be copyright
19# under the ncurses MIT-style license.  That was the effect of the agreement
20# which the principal authors of ncurses made in 1998.  However, since much of
21# the file itself is of unknown authorship (and the disclaimer below makes it
22# obvious that Raymond cannot or will not convey rights over those parts),
23# there is no explicit copyright notice on the file itself.
24#
25# It would also be a nuisance to split the file into unknown/known authorship
26# and move pieces as they are maintained, since many of the maintenance changes
27# have been small corrections to Raymond's translations to/from termcap format,
28# correcting the data but not the accompanying annotations.
29#
30# In any case, note that almost half of this file is not data but annotations
31# which reflect creative effort.  Furthermore, the structure of entries to
32# reuse common chunks also is creative (and subject to copyright).  Finally,
33# some portions of the data are derivative work under a compatible MIT-style
34# license from xterm.
35#
36#------------------------------------------------------------------------------
37#	Version 10.2.1
38#	terminfo syntax
39#
40#	Eric S. Raymond		(current maintainer)
41#	John Kunze, Berkeley
42#	Craig Leres, Berkeley
43#
44# Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45# address is no longer valid.  The latest version can always be found at
46# <http://www.tuxedo.org/terminfo>.
47#
48# PURPOSE OF THIS FILE:
49#
50# This file describes the capabilities of various character-cell terminals,
51# as needed by software such as screen-oriented editors.
52#
53# Other terminfo and termcap files exist, supported by various OS vendors
54# or as relics of various older versions of UNIX.  This one is the longest
55# and most comprehensive one in existence.  It subsumes not only the entirety
56# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57# termcap file, but also large numbers of vendor-maintained termcap and
58# terminfo entries more complete and carefully tested than those in historical
59# termcap/terminfo versions.
60#
61# Pointers to related resources (including the ncurses distribution) may
62# be found at <http://www.tuxedo.org/terminfo>.
63#
64# INTERNATIONALIZATION:
65#
66# This file uses only the US-ASCII character set (no ISO8859 characters).
67#
68# This file assumes a US-ASCII character set. If you need to fix this, start
69# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70# for your character set.  \E(A and \E)A enables the British character set
71# with the pound sign at position 2/3.
72#
73# In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74# C1 characters are considered the first-byte set of the Japanese encodings,
75# so \E)0 should be avoided in <enacs> and initialization strings.
76#
77# FILE FORMAT:
78#
79# The version you are looking at may be in any of three formats: master
80# (terminfo with OT capabilities), stock terminfo, or termcap.  You can tell
81# which by the format given in the header above.
82#
83# The master format is accepted and generated by the terminfo tools in the
84# ncurses suite; it differs from stock (System V-compatible) terminfo only
85# in that it admits a group of capabilities (prefixed `OT') equivalent to
86# various obsolete termcap capabilities.  You can, thus, convert from master
87# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88# you have ncurses `tic -I' is nicer (among other things, it automatically
89# outputs entries in a canonical form).
90#
91# The termcap version is generated automatically from the master version
92# using tic -C.  This filtering leaves in the OT capabilities under their
93# original termcap names.  All translated entries fit within the 1023-byte
94# string-table limit of archaic termcap libraries except where explicitly
95# noted below.  Note that the termcap translation assumes that your termcap
96# library can handle multiple tc capabilities in an entry. 4.4BSD has this
97# capability.  Older versions of GNU termcap, through 1.3, do not.
98#
99# For details on these formats, see terminfo(5) in the ncurses distribution,
100# and termcap(5) in the 4.4BSD Unix Programmer's Manual.  Be aware that 4.4BSD
101# curses has been declared obsolete by the caretakers of the 4.4BSD sources
102# as of June 1995; they are encouraging everyone to migrate to ncurses.
103#
104# Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105# no entry in this file has embedded comments.  This is so source translation
106# to termcap only has to carry over leading comments.  Also, no name field
107# contains embedded whitespace (such whitespace confuses rdist).
108#
109# Further note: older versions of this file were often installed with an editor
110# script (reorder) that moved the most common terminal types to the front of
111# the file.  This should no longer be necessary, as the file is now ordered
112# roughly by type frequency with ANSI/VT100 and other common types up front.
113#
114# Some information has been merged in from terminfo files distributed by
115# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below).  Much information
116# comes from vendors who maintain official terminfos for their hardware
117# (notably DEC and Wyse).
118#
119# A detailed change history is included at the end of this file.
120#
121# FILE ORGANIZATION:
122#
123# Comments in this file begin with # - they cannot appear in the middle
124# of a terminfo/termcap entry (this feature had to be sacrificed in order
125# to allow standard terminfo and termcap syntax to be generated cleanly from
126# the master format).  Individual capabilities are commented out by
127# placing a period between the colon and the capability name.
128#
129# The file is divided up into major sections (headed by lines beginning with
130# the string "########") and minor sections (beginning with "####"); do
131#
132#	grep "^####" <file> | more
133#
134# to see a listing of section headings.  The intent of the divisions is
135# (a) to make it easier to find things, and (b) to order the database so
136# that important and frequently-encountered terminal types are near the
137# front (so that you'll get reasonable search efficiency from a linear
138# search of the termcap form even if you don't use reorder).  Minor sections
139# usually correspond to manufacturers or standard terminal classes.
140# Parenthesized words following manufacturer names are type prefixes or
141# product line names used by that manufacturers.
142#
143# HOW TO READ THE ENTRIES:
144#
145# The first name in an entry is the canonical name for the model or
146# type, last entry is a verbose description.  Others are mnemonic synonyms for
147# the terminal.
148#
149# Terminal names look like <manufacturer> <model> - <modes/options>
150# The part to the left of the dash, if a dash is present, describes the
151# particular hardware of the terminal.  The part to the right may be used
152# for flags indicating special ROMs, extra memory, particular terminal modes,
153# or user preferences.
154#
155# All names should be in lower case, for consistency in typing.
156#
157# The following are conventionally used suffixes:
158#	-2p	Has two pages of memory.  Likewise 4p, 8p, etc.
159#	-am	Enable auto-margin.
160#	-m	Monochrome.  Suppress color support
161#	-mc	Magic-cookie.  Some terminals (notably older Wyses) can
162#		only support one attribute without magic-cookie lossage.
163#		Their base entry is usually paired with another that
164#		uses magic cookies to support multiple attributes.
165#	-nam	No auto-margin - suppress <am> capability
166#	-nl	No labels - suppress soft labels
167#	-ns	No status line - suppress status line
168#	-rv	Terminal in reverse video mode (black on white)
169#	-s	Enable status line.
170#	-vb	Use visible bell (<flash>) rather than <bel>.
171#	-w	Wide - in 132 column mode.
172# If a name has multiple suffixes and one is a line height, that one should
173# go first.  Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
174#
175# Entries with embedded plus signs are designed to be included through use/tc
176# capabilities, not used as standalone entries.
177#
178# To avoid search clashes, some older all-numeric names for terminals have
179# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180# All primary names of terminals now have alphanumeric prefixes.
181#
182# Comments marked "esr" are mostly results of applying the termcap-compiler
183# code packaged with ncurses and contemplating the resulting error messages.
184# In many cases, these indicated obvious fixes to syntax garbled by the
185# composers.  In a few cases, I was able to deduce corrected forms for garbled
186# capabilities by looking at context.  All the information in the original
187# entries is preserved in the comments.
188#
189# In the comments, terminfo capability names are bracketed with <> (angle
190# brackets).  Termcap capability names are bracketed with :: (colons).
191#
192# INTERPRETATION OF USER CAPABILITIES
193#
194# The System V Release 4 and XPG4 terminfo format defines ten string
195# capabilities for use by applications, <u0>...<u9>.   In this file, we use
196# certain of these capabilities to describe functions which are not covered
197# by terminfo.  The mapping is as follows:
198#
199#	u9	terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200#	u8	terminal answerback description
201#	u7	cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202#	u6	cursor position report (equiv. to ANSI/ECMA-48 CPR)
203#
204# The terminal enquire string <u9> should elicit an answerback response
205# from the terminal.  Common values for <u9> will be ^E (on older ASCII
206# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
207#
208# The cursor position request (<u7>) string should elicit a cursor position
209# report.  A typical value (for VT100 terminals) is \E[6n.
210#
211# The terminal answerback description (u8) must consist of an expected
212# answerback string.  The string may contain the following scanf(3)-like
213# escapes:
214#
215#	%c	Accept any character
216#	%[...]	Accept any number of characters in the given set
217#
218# The cursor position report (<u6>) string must contain two scanf(3)-style
219# %d format elements.  The first of these must correspond to the Y coordinate
220# and the second to the %d.  If the string contains the sequence %i, it is
221# taken as an instruction to decrement each value after reading it (this is
222# the inverse sense from the cup string).  The typical CPR value is
223# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
224#
225# These capabilities are used by tack(1m), the terminfo action checker
226# (distributed with ncurses 5.0).
227#
228# TABSET FILES
229#
230# All the entries in this file have been edited to assume that the tabset
231# files directory is /usr/share/tabset, in conformance with the File Hierarchy
232# Standard for Linux and open-source BSD systems.  Some vendors (notably Sun)
233# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
234#
235# No curses package we know of actually uses these files.  If their location
236# is an issue, you will have to hand-patch the file locations before compiling
237# this file.
238#
239# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
240#
241# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242# character-cell terminals are increasingly replaced by X displays, much of
243# this file is becoming a historical document (this is part of the reason for
244# the new organization, which puts ANSI types, xterm, Unix consoles,
245# and vt100 up front in confidence that this will catch 95% of new hardware).
246#
247# For the terminal types still alive, I'd like to have manufacturer's
248# contact data (Internet address and/or snail-mail + phone).
249#
250# I'm also interested in enriching the comments so that the latter portions of
251# the file do in fact become a potted history of VDT technology as seen by
252# UNIX hackers.  Ideally, I'd like the headers for each manufacturer to
253# include its live/dead/out-of-the-business status, and for as many
254# terminal types as possible to be tagged with information like years
255# of heaviest use, popularity, and interesting features.
256#
257# I'm especially interested in identifying the obscure entries listed under
258# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259# wisdom about them gets lost.  If you know a lot about obscure old terminals,
260# please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261# eyeball it for things you can identify and describe.
262#
263# If you have been around long enough to contribute, please read the file
264# with this in mind and send me your annotations.
265#
266# COPYRIGHTS AND OTHER DELUSIONS
267#
268# The BSD ancestor of this file had a standard Regents of the University of
269# California copyright with dates from 1980 to 1993.
270#
271# Some information has been merged in from a terminfo file SCO distributes.
272# It has an obnoxious boilerplate copyright which I'm ignoring because they
273# took so much of the content from the ancestral BSD versions of this file
274# and didn't attribute it, thereby violating the BSD Regents' copyright.
275#
276# Not that anyone should care.  However many valid functions copyrights may
277# serve, putting one on a termcap/terminfo file with hundreds of anonymous
278# contributors makes about as much sense as copyrighting a wall-full of
279# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
280#
281# This file deliberately has no copyright.  It belongs to no one and everyone.
282# If you claim you own it, you will merely succeed in looking like a fool.
283# Use it as you like.  Use it at your own risk.  Copy and redistribute freely.
284# There are no guarantees anywhere.  Svaha!
285#
286
287######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
288#
289# This section describes terminal classes and brands that are still
290# quite common.
291#
292
293#### Specials
294#
295# Special "terminals".  These are used to label tty lines when you don't
296# know what kind of terminal is on it.  The characteristics of an unknown
297# terminal are the lowest common denominator - they look about like a ti 700.
298#
299
300dumb|80-column dumb tty,
301	am,
302	cols#80,
303	bel=^G, cr=^M, cud1=^J, ind=^J,
304unknown|unknown terminal type,
305	gn, use=dumb,
306lpr|printer|line printer,
307	OTbs, hc, os,
308	cols#132, lines#66,
309	bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310glasstty|classic glass tty interpreting ASCII control characters,
311	OTbs, am,
312	cols#80,
313	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314	kcud1=^J, nel=^M^J, .kbs=^H,
315
316vanilla|dumb tty,
317	OTbs,
318	bel=^G, cr=^M, cud1=^J, ind=^J,
319
320# This is almost the same as "dumb", but with no prespecified width.
321# DEL and ^C are hardcoded to act as kill characters.
322# ^D acts as a line break (just like newline).
323# It also interprets
324#      \033];xxx\007
325# for compatibility with xterm -TD
3269term|Plan9 terminal emulator for X,
327	am,
328	OTnl=^J, bel=^G, cud1=^J,
329
330#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
331#
332# See the end-of-file comment for more on these.
333#
334
335# ANSI capabilities are broken up into pieces, so that a terminal
336# implementing some ANSI subset can use many of them.
337ansi+local1,
338	cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
339ansi+local,
340	cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341	cuu=\E[%p1%dA, use=ansi+local1,
342ansi+tabs,
343	cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
344ansi+inittabs,
345	it#8, use=ansi+tabs,
346ansi+erase,
347	clear=\E[H\E[J, ed=\E[J, el=\E[K,
348ansi+rca,
349	hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
350ansi+cup,
351	cup=\E[%i%p1%d;%p2%dH, home=\E[H,
352ansi+rep,
353	rep=%p1%c\E[%p2%{1}%-%db,
354ansi+idl1,
355	dl1=\E[M, il1=\E[L,
356ansi+idl,
357	dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
358ansi+idc,
359	dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
360ansi+arrows,
361	kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
362	khome=\E[H,
363ansi+sgr|ansi graphic renditions,
364	blink=\E[5m, invis=\E[8m, rev=\E[7m,
365	sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
366	sgr0=\E[0m,
367ansi+sgrso|ansi standout only,
368	rmso=\E[m, smso=\E[7m,
369ansi+sgrul|ansi underline only,
370	rmul=\E[m, smul=\E[4m,
371ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
372	bold=\E[1m,
373	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
374	use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
375ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
376	dim=\E[2m,
377	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
378	use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
379ansi+pp|ansi printer port,
380	mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
381ansi+csr|ansi scroll-region plus cursor save & restore,
382	csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
383
384# The IBM PC alternate character set.  Plug this into any Intel console entry.
385# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
386# ROM graphics for control characters such as the diamond, up- and down-arrow.
387# This works with the System V, Linux, and BSDI consoles.  It's a safe bet this
388# will work with any Intel console, they all seem to have inherited \E[11m
389# from the ANSI.SYS de-facto standard.
390klone+acs|alternate character set for ansi.sys displays,
391	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
392	rmacs=\E[10m, smacs=\E[11m,
393
394# Highlight controls corresponding to the ANSI.SYS standard.  Most
395# console drivers for Intel boxes obey these.  Makes the same assumption
396# about \E[11m as klone+acs.  True ANSI/ECMA-48 would have <rmso=\E[27m>,
397# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
398klone+sgr|attribute control for ansi.sys displays,
399	blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
400	rmso=\E[m, rmul=\E[m,
401	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
402	sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
403	use=klone+acs,
404
405# Most Intel boxes do not treat "invis" (invisible) text.
406klone+sgr8|attribute control for ansi.sys displays,
407	invis=\E[8m,
408	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
409	use=klone+sgr,
410
411# Highlight controls corresponding to the ANSI.SYS standard.  *All*
412# console drivers for Intel boxes obey these.  Does not assume \E[11m will
413# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
414# diamond and arrow characters under curses.
415klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
416	blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
417	rmul=\E[m,
418	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
419	sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
420	use=klone+acs,
421
422# KOI8-R (RFC1489) acs (alternate character set)
423# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
424klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
425	acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
426	rmacs=\E[10m, smacs=\E[11m,
427
428# ANSI.SYS color control.  The setab/setaf caps depend on the coincidence
429# between SVr4/XPG4's color numbers and ANSI.SYS attributes.  Here are longer
430# but equivalent strings that don't rely on that coincidence:
431# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
432# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
433# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
434# They match a subset of ECMA-48.
435klone+color|color control for ansi.sys and ISO6429-compatible displays,
436	colors#8, ncv#3, pairs#64,
437	op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
438
439# This is better than klone+color, it doesn't assume white-on-black as the
440# default color pair,  but many `ANSI' terminals don't grok the <op> cap.
441ecma+color|color control for ECMA-48-compatible terminals,
442	AX,
443	colors#8, ncv#3, pairs#64,
444	op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
445
446# Attribute control for ECMA-48-compatible terminals
447ecma+sgr|attribute capabilities for true ECMA-48 terminals,
448	rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
449
450# For comparison, here are all the capabilities implied by the Intel
451# Binary Compatibility Standard (level 2) that fit within terminfo.
452# For more detail on this rather pathetic standard, see the comments
453# near the end of this file.
454ibcs2|Intel Binary Compatibility Standard prescriptions,
455	cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
456	cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
457	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
458	dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
459	hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
460	indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
461	smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
462
463#### ANSI/ECMA-48 terminals and terminal emulators
464#
465# See near the end of this file for details on ANSI conformance.
466# Don't mess with these entries!  Lots of other entries depend on them!
467#
468# This section lists entries in a least-capable to most-capable order.
469# if you're in doubt about what `ANSI' matches yours, try them in that
470# order and back off from the first that breaks.
471
472# ansi-mr is for ANSI terminals with ONLY relative cursor addressing
473# and more than one page of memory.  It uses local motions instead of
474# direct cursor addressing, and makes almost no assumptions. It does
475# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
476ansi-mr|mem rel cup ansi,
477	am, xon,
478	cols#80, lines#24, use=vanilla, use=ansi+erase,
479	use=ansi+local1,
480
481# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
482# beware of screen size problems and memory relative cursor addressing.
483ansi-mini|any ansi terminal with pessimistic assumptions,
484	am, xon,
485	cols#80, lines#24, use=vanilla, use=ansi+cup,
486	use=ansi+erase,
487
488# ansi-mtabs adds relative addressing and minimal tab support
489ansi-mtabs|any ansi terminal with pessimistic assumptions,
490	it#8,
491	ht=^I, use=ansi+local1, use=ansi-mini,
492
493# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
494#
495# The following is an entry for the full ANSI 3.64 (1977).  It lacks
496# padding, but most terminals using the standard are "fast" enough
497# not to require any -- even at 9600 bps.  If you encounter problems,
498# try including the padding specifications.
499#
500# Note: the :as: and :ae: specifications are not implemented here, for
501# the available termcap documentation does not make clear WHICH alternate
502# character set to specify.  ANSI 3.64 seems to make allowances for several.
503# Please make the appropriate adjustments to fit your needs -- that is
504# if you will be using alternate character sets.
505#
506# There are very few terminals running the full ANSI 3.64 standard,
507# so I could only test this entry on one verified terminal (Visual 102).
508# I would appreciate the results on other terminals sent to me.
509#
510# Please report comments, changes, and problems to:
511#
512# U.S. MAIL:   Hugh Hansard
513#              Box: 22830
514#              Emory University
515#              Atlanta, GA. 30322.
516#
517# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
518#
519# (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
520ansi77|ansi 3.64 standard 1977 version,
521	OTbs, am, mir,
522	cols#80, it#8, lines#24,
523	bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
524	cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
525	cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
526	home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
527	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
528	kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
529	rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
530	smso=\E[7m, smul=\E[4m,
531
532# Procomm and some other ANSI emulations don't recognize all of the ANSI-
533# standard capabilities.  This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
534# <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
535# <cuf1>, <cud1> and <cub1>.  Also deleted <ich> and <ich1>, as QModem up to
536# 5.03 doesn't recognize these.  Finally, we delete <rep> and <ri>, which seem
537# to confuse many emulators.  On the other hand, we can count on these programs
538# doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
539# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
540# ANSI.SYS influence.
541# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
542pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
543	OTbs, am, mir, msgr,
544	cols#80, it#8, lines#24,
545	bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
546	cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
547	dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
548	hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
549	kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
550	use=klone+sgr-dumb,
551pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
552	lines#25, use=pcansi-m,
553pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
554	lines#33, use=pcansi-m,
555pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
556	lines#43, use=pcansi-m,
557# The color versions.  All PC emulators do color...
558pcansi|ibm-pc terminal programs claiming to be ansi,
559	use=klone+color, use=pcansi-m,
560pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
561	lines#25, use=pcansi,
562pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
563	lines#33, use=pcansi,
564pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
565	lines#43, use=pcansi,
566
567# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
568# If you want pound signs rather than dollars, replace `B' with `A'
569# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
570# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
571ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
572	mc5i,
573	cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
574	cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
575	ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
576	ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
577	kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
578	kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
579	rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
580	s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
581	vpa=\E[%i%p1%dd, use=pcansi-m,
582
583ansi+enq|ncurses extension for ANSI ENQ,
584	u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
585	u9=\E[c,
586
587# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
588# standard terminfo.  Assumes ANSI.SYS-compatible attributes and color.
589# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
590ansi|ansi/pc-term compatible with color,
591	use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
592
593# ansi-generic is a vanilla ANSI terminal. This is assumed to implement
594# all the normal ANSI stuff with no extensions. It assumes
595# insert/delete line/char is there, so it won't work with
596# vt100 clones. It assumes video attributes for bold, blink,
597# underline, and reverse, which won't matter much if the terminal
598# can't do some of those. Padding is assumed to be zero, which
599# shouldn't hurt since xon/xoff is assumed.
600ansi-generic|generic ansi standard terminal,
601	am, xon,
602	cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
603	use=ansi+rca, use=ansi+erase, use=ansi+tabs,
604	use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
605	use=ansi+sgrbold, use=ansi+arrows,
606
607#### DOS ANSI.SYS variants
608#
609# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
610# documentation (except for the keyboard key reassignment feature, which
611# doesn't fit the <pfkey> model well).  The klone+acs sequences were valid
612# though undocumented.  The <pfkey> capability is untested but should work for
613# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
614# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
615ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
616	OTbs, am, mir, msgr, xon,
617	cols#80, lines#25,
618	clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
619	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
620	is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
621	khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
622	rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
623	u7=\E[6n, use=klone+color, use=klone+sgr8,
624
625# Keypad:	Home=\0G	Up=\0H	PrPag=\0I
626#		ka1,kh		kcuu1		kpp,ka3
627#
628#		Left=\0K	5=\0L		Right=\0M
629#		kcub1		kb2		kcuf1
630#
631#		End=\0O		Down=\0P	NxPag=\0Q
632#		kc1,kend	kcud1		kc3,knp
633#
634#		Ins=\0R		Del=\0S
635#		kich1		kdch1
636#
637# On keyboard with 12 function keys,
638#	shifted f-keys: F13-F24
639#	control f-keys: F25-F36
640#	alt f-keys:     F37-F48
641# The shift/control/alt keys do not modify each other, but alt overrides both,
642# and control overrides shift.
643#
644# <pfkey> capability for F1-F48 -TD
645ansi.sys|ANSI.SYS 3.1 and later versions,
646	el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
647	kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
648	kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
649	kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
650	kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
651	kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
652	kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
653	kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
654	kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
655	kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
656	kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
657	kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
658	pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%?%p1%{13}%<%t%'z'%e%?%p1%{23}%<%t%'G'%e%?%p1%{25}%<%t%'p'%e%?%p1%'#'%<%t%'E'%e%?%p1%'%'%<%t%'f'%e%?%p1%'/'%<%t%'C'%e%{92}%;%;%;%;%;%;%;%p1%+%d;%p2"%s"p,
659	use=ansi.sys-old,
660
661#
662# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
663# This should only be used when the terminal emulator cannot redefine the keys.
664# Since redefining keys with ansi.sys also affects PC-DOS programs, the key
665# definitions must be restored.  If the terminal emulator is quit while in vi
666# or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
667# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
668# (^U and ^D are already defined for tn3270).  The ESC is safe for vi but it
669# does "beep".  ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
670# Note that <kcub1> is always BS, because PC-dos can tolerate this change.
671# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
672# Consequently the End keypad key could not be set (it is relatively safe and
673# actually useful because it sends ^@ O, which beeps and opens a line above).
674ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
675	is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
676	rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
677	smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
678	use=ansi.sys,
679#
680# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
681nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
682	dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
683	is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
684	use=ansi.sys,
685#
686# See ansi.sysk and nansi.sys above.
687nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
688	dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
689	is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
690	use=ansi.sysk,
691
692#### ANSI console types
693
694#
695# Atari ST terminals.
696# From Guido Flohr <gufl0000@stud.uni-sb.de>.
697#
698tw52|tw52-color|Toswin window manager with color,
699	bce,
700	colors#16, pairs#256,
701	oc=\Eb?\Ec0, op=\Eb?\Ec0,
702	setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
703	setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
704	setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
705	setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
706	use=tw52-m,
707tw52-m|Toswin window manager monochrome,
708	ul,
709	ma#999,
710	bold=\Eya, dch1=\Ea, dim=\EyB,
711	is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
712	rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
713	smso=\EyQ, smul=\EyH, use=at-m,
714tt52|Atari TT medium and high resolution,
715	lines#30, use=at-color,
716st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
717	bce,
718	colors#16, pairs#256,
719	is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
720	setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
721	setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
722	setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
723	setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
724	use=st52,
725st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
726	am, eo, mir, npc,
727	cols#80, it#8, lines#24,
728	bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
729	cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
730	cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
731	il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
732	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
733	kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
734	kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
735	kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
736	kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
737	kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
738	rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
739tw100|toswin vt100 window mgr,
740	eo, mir, msgr, xon,
741	colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
742	acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
743	bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
744	clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
745	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
746	cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
747	cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
748	dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
749	hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
750	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
751	kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
752	kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
753	kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
754	kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
755	knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
756	oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
757	rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
758	rmso=\E[m, rmul=\E[m,
759	rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
760	sc=\E7,
761	setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
762	setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
763	sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
764	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
765# The entries for stv52 and stv52pc probably need a revision.
766stv52|MiNT virtual console,
767	am, msgr,
768	cols#80, it#8, lines#30,
769	bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
770	cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
771	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
772	dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
773	ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
774	kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
775	kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
776	kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
777	kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
778	kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
779	op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
780	rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
781	smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
782stv52pc|MiNT virtual console with PC charset,
783	am, msgr,
784	cols#80, it#8, lines#30,
785	acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371,
786	bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
787	cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
788	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
789	dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
790	ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
791	kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
792	kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
793	kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
794	kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
795	kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
796	rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
797	rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
798	smso=\Ep, smul=\EyH,
799
800#### Atari ST
801#
802
803# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
804atari-old|atari st,
805	OTbs, am,
806	cols#80, it#8, lines#25,
807	clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
808	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
809	ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
810	kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
811# UniTerm terminal program for the Atari ST:  49-line VT220 emulation mode
812# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
813uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
814	lines#49,
815	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
816	use=vt220,
817# MiNT VT52 emulation. 80 columns, 25 rows.
818# MiNT is Now TOS, the operating system which comes with all Ataris now
819# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
820# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
821# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
822st52-old|Atari ST with VT52 emulation,
823	am, km,
824	cols#80, lines#25,
825	bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
826	cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
827	cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
828	ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
829	kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
830	kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
831	kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
832	kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
833	ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
834	smcup=\Ee, smso=\Ep,
835
836#### BeOS
837#
838# BeOS entry for Terminal program Seems to be almost ANSI
839beterm|BeOS Terminal,
840	am, eo, mir, msgr, xenl, xon,
841	colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
842	bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
843	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
844	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
845	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
846	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
847	ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
848	hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
849	il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
850	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
851	kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
852	kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
853	kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
854	khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
855	nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
856	rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
857	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
858	setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
859	sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
860	smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
861	vpa=\E[%i%p1%dd,
862
863#### Linux consoles
864#
865
866# This entry is good for the 1.2.13 or later version of the Linux console.
867#
868# ***************************************************************************
869# *                                                                         *
870# *                           WARNING:                                      *
871# * Linuxes come with a default keyboard mapping kcbt=^I.  This entry, in   *
872# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
873# * character. Here are the keymap replacement lines that will set this up: *
874# *                                                                         *
875#	keycode  15 = Tab             Tab
876#		alt     keycode  15 = Meta_Tab
877#		shift	keycode  15 = F26
878#	string F26 ="\033[Z"
879# *                                                                         *
880# * This has to use a key slot which is unfortunate (any unused one will    *
881# * do, F26 is the higher-numbered one).  The change ought to be built      *
882# * into the kernel tables.                                                 *
883# *                                                                         *
884# ***************************************************************************
885#
886# All linux kernels since 1.2.13 (at least) set the screen size
887# themselves; this entry assumes that capability.
888#
889linux-basic|linux console,
890	am, bce, eo, mir, msgr, xenl, xon,
891	it#8, ncv#18, U8#1,
892	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
893	bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
894	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
895	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
896	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
897	dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
898	el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
899	hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
900	il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
901	kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
902	kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
903	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
904	kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
905	kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
906	kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
907	khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
908	kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
909	rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
910	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
911	smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
912	vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
913	use=ecma+color,
914
915linux-m|Linux console no color,
916	colors@, pairs@,
917	setab@, setaf@, setb@, setf@, use=linux,
918
919# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
920# and it matters, turn off <ccc>.  The %02x escape used to implement this is
921# not supposedly back-portable to older SV curses (although it has worked fine
922# on Solaris for several years) and not supported in ncurses versions before
923# 1.9.9.
924linux-c-nc|linux console with color-change,
925	ccc,
926	initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
927	oc=\E]R, use=linux-basic,
928# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
929linux-c|linux console 1.3.6+ for older ncurses,
930	ccc,
931	initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
932	oc=\E]R, use=linux-basic,
933
934# The 2.2.x kernels add a private mode that sets the cursor type; use that to
935# get a block cursor for cvvis.
936# reported by Frank Heckenbach <frank@g-n-u.de>.
937linux2.2|linux 2.2.x console,
938	civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
939	cvvis=\E[?25h\E[?8c, use=linux-c-nc,
940
941# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
942#	http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
943# Using SI/SO has the drawback that it confuses screen.  SCS would work.
944# However, SCS is buggy (see comment in Debian #515609) -TD
945linux2.6|linux 2.6.x console,
946	rmacs=^O,
947	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
948	sgr0=\E[m\017, smacs=^N, use=linux2.2,
949
950# The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
951linux3.0|linux 3.0 kernels,
952	E3=\E[3;J, use=linux2.6,
953
954linux|linux console,
955	use=linux3.0,
956
957# Subject: linux 2.6.26 vt back_color_erase
958# Changes to the Linux console driver broke bce model as reported in
959#	https://bugzilla.novell.com/show_bug.cgi?id=418613
960# apparently from
961#	http://lkml.org/lkml/2008/4/26/305
962#	http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
963linux2.6.26|linux console w/o bce,
964	bce@, use=linux2.6,
965
966# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
967linux-nic|linux with ich/ich1 suppressed for non-curses programs,
968	ich@, ich1@, use=linux,
969
970# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
971# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
972linux-koi8|linux with koi8 alternate character set,
973	acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
974	use=linux, use=klone+koi8acs,
975
976# Another entry for KOI8-r with Qing Long's acsc.
977# (which one better complies with the standard?)
978linux-koi8r|linux with koi8-r alternate character set,
979	use=linux, use=klone+koi8acs,
980
981# Entry for the latin1 and latin2 fonts
982linux-lat|linux with latin1 or latin2 alternate character set,
983	acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
984	use=linux,
985
986# This uses graphics from VT codeset instead of from cp437.
987# reason: cp437 (aka "straight to font") is not functional under luit.
988# from: Andrey V Lukyanov <land@long.yar.ru>.
989linux-vt|linux console using VT codes for graphics,
990	acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
991	rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
992	smpch@, use=linux,
993
994# This is based on the Linux console (relies on the console to perform some
995# of the functionality), but does not recognize as many control sequences.
996# The program comes bundled with an old (circa 1998) copy of the Linux
997# console terminfo.  It recognizes some non-ANSI/VT100 sequences such as
998#	\E*	move cursor to home, as as \E[H
999#	\E,X	same as \E(X
1000#	\EE	move cursor to beginning of row
1001#	\E[y,xf	same as \E[y,xH
1002#
1003# Note: The status-line support is buggy (dsl does not work).
1004kon|kon2|jfbterm|Kanji ON Linux console,
1005	ccc@, hs,
1006	civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1007	initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1008	use=linux,
1009
1010# 16-color linux console entry; this works with a 256-character
1011# console font but bright background colors turn into dim ones when
1012# you use a 512-character console font. This uses bold for bright
1013# foreground colors and blink for bright background colors.
1014linux-16color|linux console with 16 colors,
1015	colors#16, ncv#54, pairs#256,
1016	setab=\E[4%p1%{8}%m%d%?%p1%{8}%>%t;5%e%p1%{8}%=%t;2%e;25%;m,
1017	setaf=\E[3%p1%{8}%m%d%?%p1%{8}%>%t;1%e%p1%{8}%=%t;2%e;21%;m,
1018	use=linux,
1019
1020# bterm (bogl 0.1.18)
1021# Implementation is in bogl-term.c
1022# Key capabilities from linux terminfo entry
1023#
1024# Notes:
1025# bterm only supports acs using wide-characters, has case for these: qjxamlkut
1026# bterm does not support sgr, since it only processes one parameter -TD
1027bterm|bogl virtual terminal,
1028	am, bce,
1029	colors#8, cols#80, lines#24, pairs#64,
1030	acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1031	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
1032	cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
1033	kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1034	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1035	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1036	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1037	kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1038	kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1039	kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1040	kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
1041	op=\E49;39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1042	rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1043	sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1044
1045#### Mach
1046#
1047
1048# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1049mach|Mach Console,
1050	am, km,
1051	cols#80, it#8, lines#25,
1052	bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
1053	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1054	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1055	cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1056	el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
1057	kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1058	kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1059	kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1060	kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1061	kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1062	smso=\E[7m, smul=\E[4m,
1063mach-bold|Mach Console with bold instead of underline,
1064	rmul=\E[0m, smul=\E[1m, use=mach,
1065mach-color|Mach Console with ANSI color,
1066	colors#8, pairs#64,
1067	dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1068	setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1069
1070# From: Marcus Brinkmann
1071# http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1072#
1073# Comments in the original are summarized here:
1074#
1075# hurd uses 8-bit characters (km).
1076#
1077# Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1078#
1079# Regarding compatibility to vt100:  hurd doesn't specify <xenl>, as we don't
1080# have the eat_newline_glitch.  It doesn't support setting or removing tab
1081# stops (hts/tbc).
1082#
1083# hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1084# one byte instead three.
1085#
1086# <ich1> is not included because hurd has insert mode.
1087#
1088# hurd doesn't use ^J for scrolling, because this could put things into the
1089# scrollback buffer.
1090#
1091# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1092# This is a GNU extension.
1093#
1094# The original has commented-out ncv, but is restored here.
1095#
1096# Reading the source, RIS resets cnorm, but not xmous.
1097hurd|The GNU Hurd console server,
1098	am, bce, bw, eo, km, mir, msgr, xon,
1099	colors#8, it#8, ncv#18, pairs#64,
1100	acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1101	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1102	clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1103	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1104	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1105	cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1106	dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1107	ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1108	home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1109	il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1110	invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
1111	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1112	kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1113	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1114	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1115	kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1116	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1117	khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1118	kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1119	rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
1120	rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1121	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1122	sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1123	sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
1124	smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
1125	gsbom=\E[>1h,
1126
1127#### OSF Unix
1128#
1129
1130# OSF/1 1.1 Snapshot 2
1131pmcons|pmconsole|PMAX console,
1132	am,
1133	cols#128, lines#57,
1134	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
1135	ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1136	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
1137
1138# SCO console and SOS-Syscons console for 386bsd
1139# (scoansi: had unknown capabilities
1140#	:Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
1141#	:GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
1142#	:G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
1143#	:CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
1144#	:WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
1145# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
1146# on the <smacs>=\E[12m  -- esr)
1147#
1148# klone+sgr-dumb is an error since the acsc does not match -TD
1149#
1150# In this description based on SCO's keyboard(HW) manpage list of default
1151# function key values:
1152#	F13-F24 are shifted F1-F12
1153#	F25-F36 are control F1-F12
1154#	F37-F48 are shift+control F1-F12
1155#
1156# hpa/vpa work in the console, but not in scoterm:
1157#	hpa=\E[%p1%dG,
1158#	vpa=\E[%p1%dd,
1159#
1160# SCO's terminfo uses
1161#	kLFT=\E[d,
1162#	kRIT=\E[c,
1163# which do not work (console or scoterm).
1164#
1165# Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1166scoansi-old|SCO Extended ANSI standard crt (5.0.5),
1167	OTbs, am, bce, eo, xon,
1168	colors#8, cols#80, it#8, lines#25, pairs#64,
1169	acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
1170	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
1171	civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
1172	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1173	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1174	cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
1175	dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
1176	ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
1177	hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
1178	ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
1179	kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1180	kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
1181	kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
1182	kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
1183	kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
1184	kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
1185	kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
1186	kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
1187	kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
1188	kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
1189	kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
1190	kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
1191	rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
1192	rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1193	setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
1194	smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
1195scoansi-new|SCO Extended ANSI standard crt (5.0.6),
1196	km,
1197	civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
1198	cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
1199	rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
1200	sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
1201	smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
1202	smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
1203	smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
1204	smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
1205	wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
1206	use=scoansi-old,
1207# make this easy to change...
1208scoansi|SCO Extended ANSI standard crt,
1209	use=scoansi-old,
1210
1211# This actually describes the generic SVr4 display driver for Intel boxes.
1212# The <dim=\E[2m> isn't documented and therefore may not be reliable.
1213# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
1214att6386|at386|386at|AT&T WGS 6386 console,
1215	am, bw, eo, xon,
1216	cols#80, it#8, lines#25,
1217	acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
1218	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
1219	clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
1220	cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1221	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1222	cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1223	dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1224	home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
1225	ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
1226	indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
1227	kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1228	kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
1229	kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
1230	kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
1231	knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
1232	ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
1233	sc=\E7,
1234	sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
1235	sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
1236	tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
1237# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
1238pc6300plus|AT&T 6300 plus,
1239	OTbs, am, xon,
1240	cols#80, lines#24,
1241	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
1242	clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
1243	cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
1244	dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
1245	home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
1246	invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1247	kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
1248	kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
1249	nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
1250	smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1251
1252# From: Benjamin C. W. Sittler <bsittler@nmt.edu>
1253#
1254# I have a UNIX PC which I use as a terminal attached to my Linux PC.
1255# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
1256# is broken. All the special key sequences are broken, making it unusable
1257# with Emacs. The problem stems from the following:
1258#
1259# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
1260# keypad!), loadable fonts, and strange highlighting modes ("dithered"
1261# half-intensity, "smeared" bold, and real strike-out, for example.) It also
1262# uses resizable terminal windows, but the bundled terminal program always
1263# uses an 80x24 window (and doesn't support seem to support a 132-column
1264# mode.)
1265#
1266# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
1267# library which was a superset of SVr3.5 curses (called tam, for "terminal
1268# access method".) tam includes support for real, overlapping windows,
1269# onscreen function key labels, and bitmap graphics. But since the primary
1270# user interface on the UNIX PC was a GUI program (ua, for "user
1271# assistant",) and remote administration was considered important for the
1272# machine, tam also supported VT100-compatible terminals attached to the
1273# serial port or used across the StarLan network. To simulate the extra keys
1274# not present on a VT100, users could press ESC and a two-letter sequence,
1275# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
1276# however, were not the same as those sent by the actual Undo key. The
1277# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
1278# (If you're interested in adding some of the tam calls to ncurses, btw, I
1279# have the full documentation and several programs which use tam. It also
1280# used an extended terminfo format to describe key sequences, special
1281# highlighting modes, etc.)
1282#
1283# KEYS: This means that ncurses would quite painful on the UNIX PC, since
1284# there are two sequences for every key-modifier combination (local keyboard
1285# sequence and remote "VT100" sequence.) But I doubt many people are trying
1286# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
1287# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
1288# seem to have been built from the manual describing the VT100 sequences.
1289# This means it doesn't work for a real live UNIX PC.
1290#
1291# FONTS: The UNIX PC also has a strange interpretation of "alternate
1292# character set". Rather than the VT100 graphics you might expect, it allows
1293# up to 8 custom fonts to be loaded at any given time. This means that
1294# programs expecting VT100 graphics will usually be disappointed. For this
1295# reason I have disabled the smacs/rmacs sequences, but they could easily be
1296# re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
1297# manpage), should you wish to do so:
1298#
1299# SGR10 - Select font 0 - ESC [ 10 m or SO
1300# SGR11 - Select font 1 - ESC [ 11 m or SI
1301# SGR12 - Select font 2 - ESC [ 12 m
1302# ... (etc.)
1303# SGR17 - Select font 7 - ESC [ 17 m
1304#
1305# Graphics for line drawing are not reliably found at *any* character
1306# location because the UNIX PC has dynamically reloadable fonts. I use font
1307# 0 for regular text and font 1 for italics, but this is by no means
1308# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
1309#
1310# MISC: The cursor visible/cursor invisible sequences were swapped in the
1311# distributed terminfo.
1312#
1313# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
1314# the UNIX PC terminfo entry. The modified version works great with Lynx,
1315# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
1316# attached by serial cable. In Emacs, even the Undo key works, and many
1317# applications can now use the F1-F8 keys.
1318#
1319# esr's notes:
1320#	Terminfo entry for the AT&T Unix PC 7300
1321#	from escape(7) in Unix PC 7300 Manual.
1322#	Somewhat similar to a vt100-am (but different enough
1323#	to redo this from scratch.)
1324#
1325#	/***************************************************************
1326#	*
1327#	*           FONT LOADING PROGRAM FOR THE UNIX PC
1328#	*
1329#	*     This routine loads a font defined in the file ALTFONT
1330#	*     into font memory slot #1.  Once the font has been loaded,
1331#	*     it can be used as an alternative character set.
1332#	*
1333#	*     The call to ioctl with the argument WIOCLFONT is the key
1334#	*     to this routine.  For more information, see window(7) in
1335#	*     the PC 7300 documentation.
1336#	***************************************************************/
1337#	#include <string.h>		/* needed for strcpy call */
1338#	#include <sys/window.h>         /* needed for ioctl call */
1339#	#define FNSIZE	60		/* font name size */
1340#	#define ALTFONT  "/usr/lib/wfont/special.8.ft"  /* font file */
1341#	/*
1342#	*     The file /usr/lib/wfont/special.8.ft comes with the
1343#	*     standard PC software.  It defines a graphics character set
1344#	*     similar to that of the Teletype 5425 terminal.  To view
1345#	*     this or other fonts in /usr/lib/wfont, use the command
1346#	*     cfont <filename>.  For further information on fonts see
1347#	*     cfont(1) in the PC 7300 documentation.
1348#	*/
1349#
1350#	struct altfdata 	/* structure for alt font data */
1351#	{
1352#	short	altf_slot;		/* memory slot number */
1353#	char	altf_name[FNSIZE];	/* font name (file name) */
1354#	};
1355#	ldfont()
1356#	{
1357#		int wd;		/* window in which altfont will be */
1358#		struct altfdata altf;
1359#		altf.altf_slot=1;
1360#		strcpy(altf.altf_name,ALTFONT);
1361#		for (wd =1; wd < 12; wd++) {
1362#		     ioctl(wd, WIOCLFONT,&altf);
1363#	        }
1364#	}
1365#
1366# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
1367# they're confirmed by the man page for the System V display---esr)
1368#
1369att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
1370	am, xon,
1371	cols#80, it#8, lines#24,
1372	bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
1373	clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
1374	cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1375	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1376	cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1377	ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
1378	il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
1379	kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
1380	kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
1381	kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
1382	kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
1383	kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
1384	kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
1385	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
1386	ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
1387	kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
1388	kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
1389	kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
1390	kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
1391	kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
1392	ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
1393	rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
1394	smul=\E[4m,
1395
1396# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1397# from SGI's terminfo database.  SGI's entry shows F9-F12 with the codes
1398# for the application keypad mode.  We have added iris-ansi-ap rather than
1399# change the original to keypad mode.
1400#
1401# (iris-ansi: added rmam/smam based on init string -- esr)
1402#
1403# This entry, and those derived from it, is used in xwsh (also known as
1404# winterm).  Some capabilities that do not fit into the terminfo model
1405# include the shift- and control-functionkeys:
1406#
1407# F1-F12 generate different codes when shift or control modifiers are used.
1408# For example:
1409#	F1      	\E[001q
1410#	shift F1	\E[013q
1411#	control-F1	\E[025q
1412#
1413# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1414# \EOP to \EOS.  The shifted and control modifiers still do the same thing.
1415#
1416# The cursor keys also have different codes:
1417#	control-up	\E[162q
1418#	control-down	\E[165q
1419#	control-left	\E[159q
1420#	control-right	\E[168q
1421#
1422#	shift-up	\E[161q
1423#	shift-down	\E[164q
1424#	shift-left	\E[158q
1425#	shift-right	\E[167q
1426#
1427#	control-tab	\[072q
1428#
1429iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1430	am,
1431	cols#80, it#8, lines#40,
1432	bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1433	cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
1434	cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
1435	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1436	cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1437	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1438	home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1439	is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1440	kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1441	kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1442	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
1443	kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
1444	kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
1445	kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
1446	kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
1447	knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
1448	kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
1449	rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1450	sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1451	tbc=\E[3g,
1452iris-ansi-ap|IRIS ANSI in application-keypad mode,
1453	is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1454	kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1455
1456# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1457# (T.Dickey 98/1/24)
1458iris-color|xwsh|IRIX ANSI with color,
1459	ncv#33,
1460	csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1461	ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
1462	rmul=\E[24m, rs1=\Ec,
1463	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1464	sitm=\E[3m, use=vt100+enq, use=klone+color,
1465	use=iris-ansi-ap,
1466
1467# The following is a version of the ibm-pc entry distributed with PC/IX,
1468# (Interactive Systems' System 3 for the Big Blue), modified by Richard
1469# McIntosh at UCB/CSM.  The :pt: and :uc: have been removed from the original,
1470# (the former is untrue, and the latter failed under UCB/man); standout and
1471# underline modes have been added.  Note: this entry describes the "native"
1472# capabilities of the PC monochrome display, without ANY emulation; most
1473# communications packages (but NOT PC/IX connect) do some kind of emulation.
1474pcix|PC/IX console,
1475	am, bw, eo,
1476	cols#80, lines#24,
1477	clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1478	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1479	home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
1480	smul=\E[4m,
1481
1482# (ibmpcx: this entry used to be known as ibmx.
1483# It formerly included the following extension capabilities:
1484#	:GC=b:GL=v:GR=t:RT=^J:\
1485#	:GH=\E[196g:GV=\E[179g:\
1486#	:GU=\E[193g:GD=\E[194g:\
1487#	:G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
1488#	:CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
1489#	:WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
1490# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
1491# ":kh=\E[Y:".  Added IBM-PC forms characters and highlights, they match
1492# what was there before. -- esr)
1493ibmpcx|xenix|ibmx|IBM PC xenix console display,
1494	OTbs, am, msgr,
1495	cols#80, lines#25,
1496	clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
1497	cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
1498	ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
1499	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
1500	kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
1501	kpp=\E[Z, use=klone+acs, use=klone+sgr8,
1502
1503#### QNX
1504#
1505
1506# QNX 4.0 Console
1507# Michael's original version of this entry had <am@>, <smcup=\Ei>,
1508# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1509# right corner without triggering a scroll.  The ncurses terminfo library can
1510# handle this case with the <ich1> capability, and prefers <am> for better
1511# optimization.  Bug: The <op> capability resets attributes.
1512# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1513# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1514qnx|qnx4|qnx console,
1515	daisy, km, mir, msgr, xhpa, xt,
1516	colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1517	acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1518	bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1519	cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1520	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1521	dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1522	il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1523	kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1524	kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1525	kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1526	kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1527	kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1528	kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1529	kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1530	kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1531	kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1532	kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1533	kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1534	kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1535	kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1536	ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1537	kext=\377\270, kf1=\377\201, kf10=\377\212,
1538	kf11=\377\256, kf12=\377\257, kf13=\377\213,
1539	kf14=\377\214, kf15=\377\215, kf16=\377\216,
1540	kf17=\377\217, kf18=\377\220, kf19=\377\221,
1541	kf2=\377\202, kf20=\377\222, kf21=\377\223,
1542	kf22=\377\224, kf23=\377\333, kf24=\377\334,
1543	kf25=\377\225, kf26=\377\226, kf27=\377\227,
1544	kf28=\377\230, kf29=\377\231, kf3=\377\203,
1545	kf30=\377\232, kf31=\377\233, kf32=\377\234,
1546	kf33=\377\235, kf34=\377\236, kf35=\377\276,
1547	kf36=\377\277, kf37=\377\321, kf38=\377\322,
1548	kf39=\377\323, kf4=\377\204, kf40=\377\324,
1549	kf41=\377\325, kf42=\377\326, kf43=\377\327,
1550	kf44=\377\330, kf45=\377\331, kf46=\377\332,
1551	kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1552	kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1553	khlp=\377\350, khome=\377\240, khts=\377\342,
1554	kich1=\377\253, kil1=\377\273, kind=\377\261,
1555	kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1556	knp=\377\252, knxt=\377\312, kopn=\377\357,
1557	kopt=\377\353, kpp=\377\242, kprt=\377\255,
1558	kprv=\377\302, krdo=\377\336, kref=\377\354,
1559	kres=\377\360, krfr=\377\347, kri=\377\271,
1560	krmir=\377\313, krpl=\377\362, krst=\377\352,
1561	ksav=\377\361, kslt=\377\247, kspd=\377\335,
1562	ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1563	rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1564	rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1565	setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1566	smso=\E(, smul=\E[,
1567#
1568#
1569qnxt|qnxt4|QNX4 terminal,
1570	crxm, use=qnx4,
1571#
1572qnxm|QNX4 with mouse events,
1573	maddr#1,
1574	chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1575	mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1576	mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1577	smicm=\E/>2h, use=qnx4,
1578#
1579qnxw|QNX4 windows,
1580	xvpa, use=qnxm,
1581#
1582#	Monochrome QNX4 terminal or console. Setting this terminal type will
1583#	allow an application running on a color console to behave as if it
1584#	were a monochrome terminal. Output will be through stdout instead of
1585#	console writes because the term routines will recognize that the
1586#	terminal name starts with 'qnxt'.
1587#
1588qnxtmono|Monochrome QNX4 terminal or console,
1589	colors@, pairs@,
1590	scp@, use=qnx4,
1591
1592# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1593# (esr: commented out <scp> and <rmcup> to avoid warnings.)
1594# (TD: derive from original qnx4 entry)
1595qnxt2|qnx 2.15 serial terminal,
1596	am,
1597	civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1598	rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1599
1600# QNX ANSI terminal definition
1601qansi-g|QNX ANSI,
1602	am, eslok, hs, xon,
1603	colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1604	acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1605	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1606	clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
1607	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1608	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1609	cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1610	cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1611	dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1612	el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1613	fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1614	ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1615	ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1616	is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1617	kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1618	kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1619	kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1620	kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1621	kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1622	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1623	kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1624	kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1625	kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1626	kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1627	kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1628	kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1629	kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1630	kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1631	kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1632	kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1633	kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1634	khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1635	kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1636	kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1637	kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1638	ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1639	rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1640	rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1641	rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1642	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1643	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1644	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1645	sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1646	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1647	smul=\E[4m, tbc=\E[3g,
1648	tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1649#
1650qansi|QNX ansi with console writes,
1651	daisy, xhpa, use=qansi-g,
1652#
1653qansi-t|QNX ansi without console writes,
1654	crxm, use=qansi,
1655#
1656qansi-m|QNX ansi with mouse,
1657	maddr#1,
1658	chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1659	mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1660	mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1661	smicm=\E[>2h, use=qansi,
1662#
1663qansi-w|QNX ansi for windows,
1664	xvpa, use=qansi-m,
1665
1666#### NetBSD consoles
1667#
1668# pcvt termcap database entries (corresponding to release 3.31)
1669# Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1670#
1671# (For the terminfo master file, I translated these into terminfo syntax.
1672# Then I dropped all the pseudo-HP entries. we don't want and can't use
1673# the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1674# size-dependent <is2>.  Finally, I added <rmam>/<smam> -- esr)
1675
1676# NOTE: <ich1> has been taken out of this entry. for reference, it should
1677# be <ich1=\E[@>.  For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1678# (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1679pcvtXX|pcvt vt200 emulator (DEC VT220),
1680	am, km, mir, msgr, xenl,
1681	it#8, vt#3,
1682	acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1683	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1684	clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
1685	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1686	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1687	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1688	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1689	el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1690	il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
1691	is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
1692	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1693	kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1694	kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1695	khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1696	nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1697	ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1698	rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1699	rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1700	sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1701	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1702
1703#	NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1704#	termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1705#	50 lines entries; 80 columns
1706pcvt25|dec vt220 emulation with 25 lines,
1707	cols#80, lines#25,
1708	is2=\E[1;25r\E[25;1H, use=pcvtXX,
1709pcvt28|dec vt220 emulation with 28 lines,
1710	cols#80, lines#28,
1711	is2=\E[1;28r\E[28;1H, use=pcvtXX,
1712pcvt35|dec vt220 emulation with 35 lines,
1713	cols#80, lines#35,
1714	is2=\E[1;35r\E[35;1H, use=pcvtXX,
1715pcvt40|dec vt220 emulation with 40 lines,
1716	cols#80, lines#40,
1717	is2=\E[1;40r\E[40;1H, use=pcvtXX,
1718pcvt43|dec vt220 emulation with 43 lines,
1719	cols#80, lines#43,
1720	is2=\E[1;43r\E[43;1H, use=pcvtXX,
1721pcvt50|dec vt220 emulation with 50 lines,
1722	cols#80, lines#50,
1723	is2=\E[1;50r\E[50;1H, use=pcvtXX,
1724
1725#	NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1726#	termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1727#	50 lines entries; 132 columns
1728pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1729	cols#132, lines#25,
1730	is2=\E[1;25r\E[25;1H, use=pcvtXX,
1731pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1732	cols#132, lines#28,
1733	is2=\E[1;28r\E[28;1H, use=pcvtXX,
1734pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1735	cols#132, lines#35,
1736	is2=\E[1;35r\E[35;1H, use=pcvtXX,
1737pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1738	cols#132, lines#40,
1739	is2=\E[1;40r\E[40;1H, use=pcvtXX,
1740pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1741	cols#132, lines#43,
1742	is2=\E[1;43r\E[43;1H, use=pcvtXX,
1743pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1744	cols#132, lines#50,
1745	is2=\E[1;50r\E[50;1H, use=pcvtXX,
1746
1747#	OpenBSD implements a color variation
1748pcvt25-color|dec vt220 emulation with 25 lines and color,
1749	cols#80, lines#25,
1750	is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1751	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1752	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1753	kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1754	kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1755	use=ecma+color,
1756
1757# Terminfo entries to enable the use of the ncurses library in colour on a
1758# NetBSD-arm32 console (only tested on a RiscPC).
1759# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1760# modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1761# typo in invis - TD
1762arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1763	am, bce, msgr, xenl, xon,
1764	cols#80, it#8, lines#30,
1765	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1766	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1767	clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1768	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1769	cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1770	cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1771	cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1772	enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
1773	invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1774	kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1775	kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1776	kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1777	kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1778	rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1779	rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1780	sc=\E7,
1781	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1782	sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1783	smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1784	use=klone+color,
1785
1786arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1787	cols#132, lines#50, use=arm100,
1788
1789# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1790# manufactured by Sharp for the Japenese market.
1791# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1792x68k|x68k-ite|NetBSD/x68k ITE,
1793	cols#96, lines#32,
1794	kclr=\E[9~, khlp=\E[28~, use=vt220,
1795
1796# <tv@pobox.com>:
1797# Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1798#
1799# (still unfinished, but good enough so far.)
1800ofcons|DNARD OpenFirmware console,
1801	bw,
1802	cols#80, lines#30,
1803	bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M,
1804	cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1805	cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1806	cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1807	dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1808	flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1809	il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
1810	kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1811	kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1812	kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1813	kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
1814	rmso=\2330m, rmul=\2330m,
1815	sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1816	sgr0=\2330m,
1817
1818# NetBSD "wscons" emulator in vt220 mode.
1819# This entry is based on the NetBSD termcap entry, correcting the ncv value.
1820# The emulator renders underlined text in red.  Colors are otherwise usable.
1821#
1822# Testing the emulator and reading the source code (NetBSD 2.0), it appears
1823# that "vt220" is inaccurate.  There are a few vt220-features, but most of the
1824# vt220 screens in vttest do not work with this emulator.  For instance, it
1825# identifies itself (primary DA response) as a vt220 with selective erase.  But
1826# the selective erase feature does not work.  The secondary response is copied
1827# from Kermit's emulation of vt220, does not correspond to actual vt220.  At
1828# the level of detail in a termcap, it is a passable emulator, since ECH does
1829# work.  Don't use it on a VMS system -TD
1830wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1831	bce, msgr,
1832	colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1833	is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
1834	kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1835	kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1836	kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
1837	setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
1838
1839wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1840	km, use=wsvt25,
1841
1842# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1843# DECstation/pmax.
1844rcons|BSD rasterconsole,
1845	use=sun-il,
1846# Color version of above. Color currently only provided by NetBSD.
1847rcons-color|BSD rasterconsole with ANSI color,
1848	bce,
1849	colors#8, pairs#64,
1850	op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1851
1852# mgterm -- MGL/MGL2, MobileGear Graphic Library
1853# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1854# -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1855# -- compare with cons25w
1856mgterm,
1857	OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1858	colors#8, cols#80, it#8, lines#18, pairs#64,
1859	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1860	cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1861	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1862	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1863	dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1864	dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1865	home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1866	ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1867	indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1868	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1869	kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
1870	kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
1871	kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
1872	nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
1873	rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
1874	setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1875
1876#### FreeBSD console entries
1877#
1878# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1879# Andrey Chernov maintains the FreeBSD termcap distributions.
1880#
1881# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1882# or comment out the :cb: capability in the console entry.
1883#
1884# Alexander Lukyanov reports:
1885# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1886# Now el1 clears not only to the line beginning, but also a large chunk
1887# of previous line. But there is another bug - ech does not work at all.
1888#
1889
1890# for syscons
1891# common entry without semigraphics
1892# Bug: The <op> capability resets attributes.
1893# Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1894# instance el1 does if the cursor is moved to the right margin first.  Removed
1895# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1896#
1897# Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1898# Note that this disables standout with color.
1899#
1900# The emulator sends difference strings based on shift- and control-keys,
1901# like scoansi:
1902#	F13-F24 are shifted F1-F12
1903#	F25-F36 are control F1-F12
1904#	F37-F48 are shift+control F1-F12
1905cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1906	am, bce, bw, eo, msgr, npc,
1907	colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1908	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1909	cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1910	cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1911	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1912	cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1913	dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1914	home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1915	ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1916	indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1917	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1918	kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
1919	kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
1920	kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
1921	kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
1922	kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
1923	kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
1924	kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
1925	kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
1926	kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
1927	kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
1928	knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
1929	ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
1930	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1931	sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
1932	sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1933cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
1934	acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
1935	use=cons25w,
1936cons25-debian|freebsd console with debian backspace (25-line ansi mode),
1937	kbs=\177, kdch1=\E[3~, use=cons25,
1938cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
1939	colors@, pairs@,
1940	bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1941	sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1942	smul=\E[4m, use=cons25,
1943cons30|ansi80x30|freebsd console (30-line ansi mode),
1944	lines#30, use=cons25,
1945cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
1946	lines#30, use=cons25-m,
1947cons43|ansi80x43|freebsd console (43-line ansi mode),
1948	lines#43, use=cons25,
1949cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
1950	lines#43, use=cons25-m,
1951cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
1952	lines#50, use=cons25,
1953cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
1954	lines#50, use=cons25-m,
1955cons60|ansi80x60|freebsd console (60-line ansi mode),
1956	lines#60, use=cons25,
1957cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
1958	lines#60, use=cons25-m,
1959cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
1960	acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
1961	use=cons25w,
1962cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
1963	colors@, pairs@,
1964	op@, rmul=\E[m, setab@, setaf@,
1965	sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
1966	smul=\E[4m, use=cons25r,
1967cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
1968	lines#50, use=cons25r,
1969cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
1970	lines#50, use=cons25r-m,
1971cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
1972	lines#60, use=cons25r,
1973cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
1974	lines#60, use=cons25r-m,
1975# ISO 8859-1 FreeBSD console
1976cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
1977	acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
1978	use=cons25w,
1979cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
1980	colors@, pairs@,
1981	bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1982	sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1983	smul=\E[4m, use=cons25l1,
1984cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
1985	lines#50, use=cons25l1,
1986cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
1987	lines#50, use=cons25l1-m,
1988cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
1989	lines#60, use=cons25l1,
1990cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
1991	lines#60, use=cons25l1-m,
1992
1993#### 386BSD and BSD/OS Consoles
1994#
1995
1996# This was the original 386BSD console entry (I think).
1997# Some places it's named oldpc3|oldibmpc3.
1998# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
1999origpc3|origibmpc3|IBM PC 386BSD Console,
2000	OTbs, am, bw, eo, xon,
2001	cols#80, lines#25,
2002	acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
2003	bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2004	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2005	home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2006	kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2007	rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2008	smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2009
2010# description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2011oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2012	OTbs, km,
2013	lines#25,
2014	bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
2015	ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2016	kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2017	knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
2018
2019# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2020# Note, the emulator supports many of the additional console features
2021# listed in the iBCS2 (e.g. character-set selection) though not all
2022# are described here.  This entry really ought to be upgraded.
2023# Also note, the console will also work with fewer lines after doing
2024# "stty rows NN", e.g. to use 24 lines.
2025# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2026# Bug: The <op> capability resets attributes.
2027bsdos-pc|IBM PC BSD/OS Console,
2028	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2029	use=bsdos-pc-nobold,
2030
2031bsdos-pc-nobold|BSD/OS PC console w/o bold,
2032	use=klone+color, use=bsdos-pc-m,
2033
2034bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2035	OTbs, am, eo, km, xon,
2036	cols#80, it#8, lines#25,
2037	bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
2038	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2039	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2040	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2041	il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
2042	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2043	kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
2044	sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2045	use=klone+sgr8,
2046
2047# Old names for BSD/OS PC console used in releases before 4.1.
2048pc3|BSD/OS on the PC Console,
2049	use=bsdos-pc-nobold,
2050ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2051	use=bsdos-pc,
2052
2053# BSD/OS on the SPARC
2054bsdos-sparc|Sun SPARC BSD/OS Console,
2055	use=sun,
2056
2057# BSD/OS on the PowerPC
2058bsdos-ppc|PowerPC BSD/OS Console,
2059	use=bsdos-pc,
2060
2061#### DEC VT52
2062# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2063#
2064# Actually (TD pointed this out at the time the acsc string was added):
2065# vt52 shouldn't define full acsc since most of the cells don't match.
2066# see vt100 manual page A-31.  This is the list that does match:
2067#	f degree
2068#	g plus/minus
2069#	h right-arrow
2070#	k down-arrow
2071#	m scan-1
2072#	o scan-3
2073#	q scan-5
2074#	s scan-7
2075# The line-drawing happens to work in several terminal emulators, but should
2076# not be used as a guide to the capabilities of the vt52.  Note in particular
2077# that vt52 does not support line-drawing characters (the scan-X values refer
2078# to a crude plotting feature) -TD
2079vt52|dec vt52,
2080	OTbs,
2081	cols#80, it#8, lines#24,
2082	acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
2083	cub1=\ED, cud1=\EB, cuf1=\EC,
2084	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2085	el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
2086	kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
2087
2088#### DEC VT100 and compatibles
2089#
2090# DEC terminals from the vt100 forward are collected here. Older DEC terminals
2091# and micro consoles can be found in the `obsolete' section.  More details on
2092# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2093# found near the end of this file.
2094#
2095# Except where noted, these entries are DEC's official terminfos.
2096# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2097# Engineering for more information.  Updated terminfos and termcaps
2098# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2099#
2100# In October 1995 DEC sold its terminals business, including the VT and Dorio
2101# line and trademark, to SunRiver Data Systems.  SunRiver has since changed
2102# its name to Boundless Technologies; see http://www.boundless.com.
2103#
2104
2105# NOTE:  Any VT100 emulation, whether in hardware or software, almost
2106# certainly includes what DEC called the `Level 1 editing extension' codes;
2107# only the very oldest VT100s lacked these and there probably aren't any of
2108# those left alive.  To capture these, use one of the VT102 entries.
2109#
2110# Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2111# since the cursor is left in a different position while in the
2112# weird state (concept at beginning of next line, vt100 at end
2113# of this line) so all versions of vi before 3.7 don't handle
2114# <xenl> right on vt100. The correct way to handle <xenl> is when
2115# you output the char in column 80, immediately output CR LF
2116# and then assume you are in column 1 of the next line. If <xenl>
2117# is on, am should be on too.
2118#
2119# I assume you have smooth scroll off or are at a slow enough baud
2120# rate that it doesn't matter (1200? or less). Also this assumes
2121# that you set auto-nl to "on", if you set it off use vt100-nam
2122# below.
2123#
2124# The padding requirements listed here are guesses. It is strongly
2125# recommended that xon/xoff be enabled, as this is assumed here.
2126#
2127# The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2128# tab settings are in non-volatile memory and don't need to be
2129# reset upon login. Also setting the number of columns glitches
2130# the screen annoyingly. You can type "reset" to get them set.
2131#
2132# The VT100 series terminals have cursor ("arrows") keys which can operate
2133# in two different modes: Cursor Mode and Application Mode.  Cursor Mode
2134# is the reset state, and is assumed to be the normal state.  Application
2135# Mode is the "set" state.  In Cursor Mode, the cursor keys transmit
2136# "Esc [ {code}" sequences, conforming to ANSI standards.  In Application
2137# Mode, the cursor keys transmit "Esc O <code>" sequences.  Application Mode
2138# was provided primarily as an aid to the porting of VT52 applications.  It is
2139# assumed that the cursor keys are normally in Cursor Mode, and expected that
2140# applications such as vi will always transmit the <smkx> string.  Therefore,
2141# the definitions for the cursor keys are made to match what the terminal
2142# transmits after the <smkx> string is transmitted.  If the <smkx> string
2143# is a null string or is not defined, then cursor keys are assumed to be in
2144# "Cursor Mode", and the cursor keys definitions should match that assumption,
2145# else the application may fail.  It is also expected that applications will
2146# always transmit the <rmkx> string to the terminal before they exit.
2147#
2148# The VT100 series terminals have an auxiliary keypad, commonly referred to as
2149# the "Numeric Keypad", because it is a cluster of numeric and function keys.
2150# The Numeric Keypad which can operate in two different modes: Numeric Mode and
2151# Application Mode.  Numeric Mode is the reset state, and is assumed to be
2152# the normal state.  Application Mode is the "set" state.  In Numeric Mode,
2153# the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2154# Enter key transmits the same as the Return key (Note: the Return key
2155# can be configured to send either LF (\015) or CR LF).  In Application Mode,
2156# all the keypad keys transmit "Esc O {code}" sequences.  The PF1 - PF4 keys
2157# always send the same "Esc O {code}" sequences.  It is assumed that the keypad
2158# is normally in Numeric Mode.  If an application requires that the keypad be
2159# in Application Mode then it is expected that the user, or the application,
2160# will set the TERM environment variable to point to a terminfo entry which has
2161# defined the <smkx> string to include the codes that switch the keypad into
2162# Application Mode, and the terminfo entry will also define function key
2163# fields to match the Application Mode control codes.  If the <smkx> string
2164# is a null string or is not defined, then the keypad is assumed to be in
2165# Numeric Mode.  If the <smkx> string switches the keypad into Application
2166# Mode, it is expected that the <rmkx> string will contain the control codes
2167# necessary to reset the keypad to "Normal" mode, and it is also expected that
2168# applications which transmit the <smkx> string will also always transmit the
2169# <rmkx> string to the terminal before they exit.
2170#
2171# Here's a diagram of the VT100 keypad keys with their bindings.
2172# The top line is the name of the key (some DEC keyboards have the keys
2173# labelled somewhat differently, like GOLD instead of PF1, but this is
2174# the most "official" name).  The second line is the escape sequence it
2175# generates in Application Keypad mode (where "$" means the ESC
2176# character).  The third line contains two items, first the mapping of
2177# the key in terminfo, and then in termcap.
2178#   _______________________________________
2179#  |   PF1   |   PF2   |   PF3   |   PF4   |
2180#  |   $OP   |   $OQ   |   $OR   |   $OS   |
2181#  |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2182#  |    7         8         9         -    |
2183#  |   $Ow   |   $Ox   |   $Oy   |   $Om   |
2184#  |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2185#  |    4    |    5    |    6    |    ,    |
2186#  |   $Ot   |   $Ou   |   $Ov   |   $Ol   |
2187#  |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2188#  |    1    |    2    |    3    |         |
2189#  |   $Oq   |   $Or   |   $Os   |  enter  |
2190#  |_ka1__K1_|_kb2__K2_|_ka3__K3_|  $OM    |
2191#  |         0         |   .     |         |
2192#  |        $Op        |  $On    |         |
2193#  |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2194#
2195# Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2196# terminfo guidelines.  That is a compromise used to assign the remaining
2197# keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2198# support:
2199vt100+keypad|dec vt100 numeric keypad no fkeys,
2200	ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2201vt100+pfkeys|dec vt100 numeric keypad,
2202	kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2203	use=vt100+keypad,
2204vt100+fnkeys|dec vt100 numeric keypad,
2205	kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2206	kf9=\EOw, use=vt100+pfkeys,
2207#
2208# A better adaptation to modern keyboards such as the PC's, which have a dozen
2209# function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2210# use the 5-key arrangement to model the arrow keys as suggested in the
2211# terminfo guidelines:
2212#   _______________________________________
2213#  |   PF1   |   PF2   |   PF3   |   PF4   |
2214#  |   $OP   |   $OQ   |   $OR   |   $OS   |
2215#  |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2216#  |    7         8         9         -    |
2217#  |   $Ow   |   $Ox   |   $Oy   |   $Om   |
2218#  |_ka1__K1_|_________|_ka3__K3_|_________|
2219#  |    4    |    5    |    6    |    ,    |
2220#  |   $Ot   |   $Ou   |   $Ov   |   $Ol   |
2221#  |_________|_kb2__K2_|_________|_________|
2222#  |    1    |    2    |    3    |         |
2223#  |   $Oq   |   $Or   |   $Os   |  enter  |
2224#  |_kc1__K4_|_________|_kc3__K5_|  $OM    |
2225#  |         0         |   .     |         |
2226#  |        $Op        |  $On    |         |
2227#  |___________________|_________|_kent_@8_|
2228#
2229vt220+keypad|dec vt220 numeric keypad,
2230	ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2231	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2232	kb3=\EOv, kc2=\EOr,
2233#
2234vt100+enq|ncurses extension for vt100-style ENQ,
2235	u8=\E[?1;2c, use=ansi+enq,
2236vt102+enq|ncurses extension for vt102-style ENQ,
2237	u8=\E[?6c, use=ansi+enq,
2238#
2239# And here, for those of you with orphaned VT100s lacking documentation, is
2240# a description of the soft switches invoked when you do `Set Up'.
2241#
2242#  Scroll 0-Jump               Shifted 3   0-#
2243#  |      1-Smooth             |           1-British pound sign
2244#  | Autorepeat 0-Off          | Wrap Around 0-Off
2245#  | |          1-On           | |           1-On
2246#  | | Screen 0-Dark Bkg       | | New Line 0-Off
2247#  | | |      1-Light Bkg      | | |        1-On
2248#  | | | Cursor 0-Underline    | | | Interlace 0-Off
2249#  | | | |      1-Block        | | | |         1-On
2250#  | | | |                     | | | |
2251#  1 1 0 1       1 1 1 1       0 1 0 0       0 0 1 0       <--Standard Settings
2252#                | | | |                     | | | |
2253#                | | | Auto XON/XOFF 0-Off   | | | Power 0-60 Hz
2254#                | | |               1-On    | | |       1-50 Hz
2255#                | | Ansi/VT52 0-VT52        | | Bits Per Char. 0-7 Bits
2256#                | |           1-ANSI        | |                1-8 Bits
2257#                | Keyclick 0-Off            | Parity 0-Off
2258#                |          1-On             |        1-On
2259#                Margin Bell 0-Off           Parity Sense 0-Odd
2260#                            1-On                         1-Even
2261#
2262# The following SET-UP modes are assumed for normal operation:
2263#	ANSI_MODE	AUTO_XON/XOFF_ON	NEWLINE_OFF	80_COLUMNS
2264#	WRAP_AROUND_ON  JUMP_SCROLL_OFF
2265# Other SET-UP modes may be set for operator convenience or communication
2266# requirements; I recommend
2267#	AUTOREPEAT_ON	BLOCK_CURSOR	MARGIN_BELL_OFF    SHIFTED_3_#
2268# Unless you have a graphics add-on such as Digital Engineering's VT640
2269# (and even then, whenever it can be arranged!) you should set
2270#	INTERLACE_OFF
2271#
2272# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2273vt100|vt100-am|dec vt100 (w/advanced video),
2274	OTbs, am, mc5i, msgr, xenl, xon,
2275	cols#80, it#8, lines#24, vt#3,
2276	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2277	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2278	clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2279	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2280	cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2281	cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2282	cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2283	enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
2284	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2285	lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
2286	rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
2287	rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
2288	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2289	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
2290	sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2291	smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
2292	use=vt100+fnkeys,
2293vt100nam|vt100-nam|vt100 no automargins,
2294	am@, xenl@, use=vt100-am,
2295vt100-vb|dec vt100 (w/advanced video) & no beep,
2296	bel@, flash=\E[?5h\E[?5l, use=vt100,
2297
2298# Ordinary vt100 in 132 column ("wide") mode.
2299vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2300	cols#132, lines#24,
2301	rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2302vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2303	cols#132, lines#14, vt@,
2304	rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2305
2306# vt100 with no advanced video.
2307vt100-nav|vt100 without advanced video option,
2308	xmc#1,
2309	blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2310	smul@, use=vt100,
2311vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2312	cols#132, lines#14, use=vt100-nav,
2313
2314# vt100 with one of the 24 lines used as a status line.
2315# We put the status line on the top.
2316vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2317	eslok, hs,
2318	lines#23,
2319	clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2320	cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2321	fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2322	tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2323
2324# Status line at bottom.
2325# Clearing the screen will clobber status line.
2326vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2327	eslok, hs,
2328	lines#23,
2329	dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2330	tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2331
2332# Most of the `vt100' emulators out there actually emulate a vt102
2333# This entry (or vt102-nsgr) is probably the right thing to use for
2334# these.
2335vt102|dec vt102,
2336	dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2337	use=vt100,
2338vt102-w|dec vt102 in wide mode,
2339	cols#132,
2340	rs3=\E[?3h, use=vt102,
2341
2342# Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2343# fail to interpret the ^O and ^N escapes properly.  Symptom: the <sgr0>
2344# string in the canonical vt100 entry above leaves the screen littered
2345# with little  snowflake or star characters (IBM PC ROM character \017 = ^O)
2346# after highlight turnoffs.  This entry should fix that, and even leave
2347# ACS support working, at the cost of making multiple-highlight changes
2348# slightly more expensive.
2349# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2350vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2351	sgr@, sgr0=\E[m, use=vt102,
2352
2353# VT125 Graphics CRT.  Clear screen also erases graphics
2354# Some vt125's came configured with vt102 support.
2355vt125|vt125 graphics terminal,
2356	mir,
2357	clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2358
2359# This isn't a DEC entry, it came from University of Wisconsin.
2360# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2361vt131|dec vt131,
2362	OTbs, am, xenl,
2363	cols#80, it#8, lines#24, vt#3,
2364	bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2365	clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2366	cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
2367	cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2368	ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2369	is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2370	kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2371	kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2372	rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2373	rmul=\E[m$<2/>,
2374	rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2375	sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2376	smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2377
2378# vt132 - like vt100 but slower and has ins/del line and such.
2379# I'm told that <smir>/<rmir> are backwards in the terminal from the
2380# manual and from the ANSI standard, this describes the actual
2381# terminal. I've never actually used a vt132 myself, so this
2382# is untested.
2383#
2384vt132|DEC vt132,
2385	xenl,
2386	dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2387	ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2388
2389# This vt220 description maps F5--F9 to the second block of function keys
2390# at the top of the keyboard.  The "DO" key is used as F10 to avoid conflict
2391# with the key marked (ESC) on the vt220.  See vt220d for an alternate mapping.
2392# PF1--PF4 are used as F1--F4.
2393#
2394vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
2395	OTbs, OTpt, am, mir, xenl, xon,
2396	cols#80, lines#24, vt#3,
2397	OTnl=^J,
2398	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2399	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2400	clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
2401	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
2402	cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2403	dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2404	if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2405	is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2406	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
2407	kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2408	kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
2409	khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
2410	rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
2411	ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2412	rmso=\E[27m, rmul=\E[24m,
2413	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2414	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2415	sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2416	smso=\E[7m, smul=\E[4m,
2417
2418# A much better description of the VT200/220; used to be vt220-8
2419# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2420# designation to accommodate bug in pcvt -TD
2421vt220|vt200|dec vt220,
2422	OTbs, am, mc5i, mir, msgr, xenl, xon,
2423	cols#80, it#8, lines#24, vt#3,
2424	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2425	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
2426	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2427	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2428	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2429	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2430	ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2431	flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2432	ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2433	il=\E[%p1%dL, il1=\E[L, ind=\ED,
2434	is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
2435	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
2436	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2437	kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
2438	kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
2439	kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
2440	kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
2441	lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i,
2442	mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
2443	rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
2444	rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2445	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2446	sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2447	smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2448vt220-w|vt200-w|DEC vt220 in wide mode,
2449	cols#132,
2450	rs3=\E[?3h, use=vt220,
2451vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
2452	OTbs, am, mc5i, mir, msgr, xenl, xon,
2453	cols#80, it#8, lines#24, vt#3,
2454	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2455	bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
2456	csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2457	cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
2458	cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2459	dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2460	ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2461	flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2462	ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2463	il=\233%p1%dL, il1=\233L, ind=\ED,
2464	is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
2465	kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2466	kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
2467	kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
2468	kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
2469	kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
2470	kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
2471	knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
2472	lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
2473	nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B,
2474	rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m,
2475	rs1=\233?3l, sc=\E7,
2476	sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2477	sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2478	smso=\2337m, smul=\2334m, tbc=\2333g,
2479
2480# vt220d:
2481# This vt220 description regards F6--F10 as the second block of function keys
2482# at the top of the keyboard.  This mapping follows the description given
2483# in the VT220 Programmer Reference Manual and agrees with the labeling
2484# on some terminals that emulate the vt220.  There is no support for an F5.
2485# See vt220 for an alternate mapping.
2486#
2487vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
2488	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2489	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2490	kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2491	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2492
2493vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
2494	am@,
2495	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2496
2497# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2498# (not an official DEC entry!)
2499# The problem with real vt220 terminals is they don't send escapes when in
2500# in vt220 mode.  This can be gotten around two ways.  1> don't send
2501# escapes or 2> put the vt220 into vt100 mode and use all the nifty
2502# features of vt100 advanced video which it then has.
2503#
2504# This entry takes the view of putting a vt220 into vt100 mode so
2505# you can use the escape key in emacs and everything else which needs it.
2506#
2507# You probably don't want to use this on a VMS machine since VMS will think
2508# it has a vt220 and will get fouled up coming out of emacs
2509#
2510# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2511# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2512vt200-js|vt220-js|dec vt200 series with jump scroll,
2513	am,
2514	cols#80,
2515	bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2516	cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2517	cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
2518	ht=^I, il1=\E[L, ind=\ED,
2519	is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
2520	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2521	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
2522	rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2523	rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2524	rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2525	smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2526
2527# This was DEC's vt320.  Use the purpose-built one below instead
2528#vt320|DEC VT320 in vt100 emulation mode,
2529#	use=vt220,
2530
2531# Use v320n for SCO's LYRIX.  Otherwise, use Adam Thompson's vt320-nam.
2532#
2533vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
2534	am@,
2535	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2536
2537# These entries are not DEC's official ones, they were purpose-built for the
2538# VT320.  Here are the designer's notes:
2539# <kel> is end on a PC kbd.  Actually 'select' on a VT.  Mapped to
2540# 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2541# khome is Home on a PC kbd.  Actually 'FIND' on a VT.
2542# Things that use <knxt> usually use tab anyways... and things that don't use
2543# tab usually use <knxt> instead...
2544# kprv is same as tab - Backtab is useless...
2545# I left out <sgr> because of its RIDICULOUS complexity,
2546# and the resulting fact that it causes the termcap translation of the entry
2547# to SMASH the 1k-barrier...
2548# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2549# (vt320: uncommented <fsl> --esr)
2550vt320|vt300|dec vt320 7 bit terminal,
2551	am, eslok, hs, mir, msgr, xenl,
2552	cols#80, lines#24, wsl#80,
2553	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2554	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2555	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2556	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2557	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2558	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2559	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2560	ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$},
2561	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2562	il1=\E[L, ind=\ED,
2563	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2564	kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2565	kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2566	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2567	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2568	kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2569	kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2570	kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i,
2571	mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m,
2572	rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2573	rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2574	rmul=\E[m,
2575	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2576	sc=\E7,
2577	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2578	sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2579	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2580	tsl=\E[1$}\E[H\E[K, use=vt220+keypad,
2581vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
2582	am@,
2583	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2584	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2585	use=vt320,
2586# We have to init 132-col mode, not 80-col mode.
2587vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
2588	cols#132, wsl#132,
2589	is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2590	rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2591	use=vt320,
2592vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
2593	am@,
2594	is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2595	rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2596	use=vt320-w,
2597
2598# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2599#   which are pretty much a superset of the VT320.  They have the
2600#   host writable status line, yet another different DRCS matrix size,
2601#   and such, but they add the DEC Technical character set, Multiple text
2602#   pages, selectable length pages, and the like.  The difference between
2603#   the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2604#   monitor, the former has 4 planes and a color monitor.  These terminals
2605#   support VT131 and ANSI block mode, but as with much of these things,
2606#   termcap/terminfo doesn't deal with these features.
2607#
2608# Note that this entry is are set up in what was the standard way for GNU
2609# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2610# keys were switched into application mode at the same time the numeric pad
2611# is switched into application mode.  This changes the definitions of the
2612# arrow keys.  Emacs v19 is smarter and mines its keys directly out of
2613# your termcap or terminfo entry,
2614#
2615# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2616# (vt340: string capability "sb=\E[M" corrected to "sr";
2617# also, added <rmam>/<smam> based on the init string -- esr)
2618vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2619	am, eslok, hs, mir, msgr, xenl, xon,
2620	cols#80, it#8, lines#24, vt#3,
2621	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2622	blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2623	cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2624	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2625	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2626	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2627	dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
2628	ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2629	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2630	il1=\E[L, ind=\ED,
2631	is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2632	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2633	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2634	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2635	lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2636	rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2637	rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2638	rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2639	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2640	sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2641	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2642	tsl=\E[2$~\E[1$}\E[1;%dH,
2643
2644# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2645# (originally written with vt420 as its primary name, and usable for it).
2646#
2647# VT400/420 -- This terminal is a superset of the vt320.  It adds the multiple
2648#    text pages and long text pages with selectable length of the vt340, along
2649#    with left and right margins, rectangular area text copy, fill, and erase
2650#    operations, selected region character attribute change operations,
2651#    page memory and rectangle checksums, insert/delete column, reception
2652#    macros, and other features too numerous to remember right now.  TERMCAP
2653#    can only take advantage of a few of these added features.
2654#
2655# Note that this entry is are set up in what was the standard way for GNU
2656# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2657# keys were switched into application mode at the same time the numeric pad
2658# is switched into application mode.  This changes the definitions of the
2659# arrow keys.  Emacs v19 is smarter and mines its keys directly out of
2660# your termcap entry,
2661#
2662# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2663# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2664# also, added <rmam>/<smam> based on the init string -- esr)
2665vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2666	am, eslok, hs, mir, msgr, xenl, xon,
2667	cols#80, it#8, lines#24, vt#3,
2668	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2669	blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2670	clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
2671	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2672	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2673	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2674	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2675	dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2676	el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2677	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2678	il=\E[%p1%dL, il1=\E[L, ind=\ED,
2679	is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2680	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2681	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2682	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2683	lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2684	rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2685	rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2686	rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2687	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2688	sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2689	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2690	tsl=\E[2$~\E[1$}\E[1;%dH,
2691
2692# (vt420: I removed <kf0>, it collided with <kf10>.  I also restored
2693# a missing <sc> -- esr)
2694vt420|DEC VT420,
2695	am, mir, xenl, xon,
2696	cols#80, lines#24, vt#3,
2697	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2698	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2699	clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2700	cub1=^H, cud1=\E[B, cuf1=\E[C,
2701	cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2702	dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2703	if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2704	is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2705	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2706	kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2707	kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2708	kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2709	kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
2710	rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
2711	rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2712	rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2713	rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2714	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2715	sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2716	smkx=\E=, smso=\E[7m, smul=\E[4m,
2717
2718# DEC VT220 and up support DECUDK (user-defined keys).  DECUDK (i.e., pfx)
2719# takes two parameters, the key and the string.  Translating the key is
2720# straightforward (keys 1-5 are not defined on real terminals, though some
2721# emulators define these):
2722#
2723#               if (key < 16) then  value = key;
2724#               else if (key < 21) then value = key + 1;
2725#               else if (key < 25) then value = key + 2;
2726#               else if (key < 27) then value = key + 3;
2727#               else if (key < 30) then value = key + 4;
2728#               else value = key + 5;
2729#
2730# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2731# There's no provision in terminfo for emitting a string in this format, so the
2732# application has to know it.
2733#
2734vt420pc|DEC VT420 w/PC keyboard,
2735	kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
2736	kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
2737	kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
2738	kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
2739	kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
2740	kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
2741	kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
2742	kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
2743	kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
2744	kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
2745	kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
2746	kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
2747	kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2748	kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2749	pctrm=USR_TERM\:vt420pcdos\:,
2750	pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2751	use=vt420,
2752
2753vt420pcdos|DEC VT420 w/PC for DOS Merge,
2754	lines#25,
2755	dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
2756	pctrm@,
2757	rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2758	sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2759
2760vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2761	kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2762	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2763	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2764	kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2765	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2766	khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2767	use=vt420,
2768
2769vt510|DEC VT510,
2770	use=vt420,
2771vt510pc|DEC VT510 w/PC keyboard,
2772	use=vt420pc,
2773vt510pcdos|DEC VT510 w/PC for DOS Merge,
2774	use=vt420pcdos,
2775
2776# VT520/VT525
2777#
2778# The VT520 is a monochrome text terminal capable of managing up to
2779# four independent sessions in the terminal.  It has multiple ANSI
2780# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2781# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2782# 925 910+, ADDS A2).  This terminfo data is for the ANSI emulations only.
2783#
2784# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2785# [Alt]/[Print Screen] depending upon which keyboard and which
2786# terminal mode is being used.  If Set-Up has been disabled or
2787# assigned to an unknown key, Set-Up may be entered by pressing
2788# [F3] as the first key after power up, regardless of keyboard type.
2789# (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
2790vt520|DEC VT520,
2791	am, mir, xenl, xon,
2792	cols#80, lines#24, vt#3,
2793	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2794	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2795	clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2796	cub1=^H, cud1=\E[B, cuf1=\E[C,
2797	cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2798	dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2799	if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2800	is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2801	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2802	kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2803	kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2804	kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2805	kslt=\E[4~,
2806	pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2807	rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2808	ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2809	rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2810	rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2811	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2812	sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2813	smso=\E[7m, smul=\E[4m,
2814
2815# (vt525: I added <rmam>/<smam> based on the init string;
2816# removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
2817vt525|DEC VT525,
2818	am, mir, xenl, xon,
2819	cols#80, lines#24, vt#3,
2820	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2821	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2822	clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2823	cub1=^H, cud1=\E[B, cuf1=\E[C,
2824	cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2825	dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2826	if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2827	is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2828	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2829	kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2830	kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2831	kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2832	kslt=\E[4~,
2833	pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2834	rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2835	ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2836	rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2837	rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2838	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2839	sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2840	smso=\E[7m, smul=\E[4m,
2841
2842#### VT100 emulations
2843#
2844
2845# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2846# (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2847# to telnetd.   Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2848# that this works best with a stock vt100 entry.
2849dec-vt100|EWAN telnet's vt100 emulation,
2850	use=vt100,
2851
2852# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
2853dec-vt220|DOS tnvt200 terminal emulator,
2854	am@, use=vt220,
2855
2856# Zstem340 is an (IMHO) excellent VT emulator for PC's.  I recommend it to
2857# anyone who needs PC VT340 emulation. (or anything below that level, for
2858# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2859# RDBM systems, it includes ReGIS and SiXel support!  I'm impressed...
2860# I can send the address if requested.
2861# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
2862# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2863z340|zstem vt340 terminal emulator 132col 42line,
2864	lines#42,
2865	is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2866	rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2867	use=vt320-w,
2868z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2869	am@,
2870	is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2871	rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2872	use=z340,
2873
2874# CRT is shareware.  It implements some xterm features, including mouse.
2875crt|crt-vt220|CRT 2.3 emulating VT220,
2876	bce, msgr,
2877	ncv@,
2878	hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
2879
2880# PuTTY 0.55 (released 3 August 2004)
2881# http://www.chiark.greenend.org.uk/~sgtatham/putty/
2882#
2883# Comparing with 0.51, vttest is much better (only a few problems with the
2884# cursor position reports and wrapping).
2885#
2886# PuTTY 0.51 (released 14 December 2000)
2887#
2888# This emulates vt100 + vt52 (plus a few vt220 features:  ech, SRM, DECTCEM, as
2889# well as SCO and Atari, color palettes from Linux console).  Reading the code,
2890# it is intended to be VT102 plus selected features.  By default, it sets $TERM
2891# to xterm, which is incorrect, since several features are misimplemented:
2892#
2893#	Alt+key always sends ESC+key, so 'km' capability is removed.
2894#
2895#	Control responses, wrapping and tabs are buggy, failing a couple of
2896#	screens in vttest.
2897#
2898#	xterm mouse support is not implemented (unrelease version may).
2899#
2900# Several features such as backspace/delete are optional; this entry documents
2901# the default behavior -TD
2902
2903putty|PuTTY terminal emulator,
2904	am, bce, bw, ccc, hs, mir, msgr, xenl, xon, XT,
2905	colors#8, it#8, ncv#22, pairs#64, U8#1,
2906	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2907	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2908	clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2909	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2910	cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
2911	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
2912	dch=\E[%p1%dP, dch1=\E[P,
2913	dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
2914	dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX,
2915	ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
2916	flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG,
2917	ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
2918	indn=\E[%p1%dS,
2919	initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
2920	is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
2921	kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
2922	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~,
2923	kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
2924	kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
2925	kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
2926	kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
2927	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2928	khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2929	kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
2930	ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
2931	rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
2932	rmso=\E[27m, rmul=\E[24m,
2933	rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
2934	s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
2935	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2936	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2937	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
2938	smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
2939	tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq,
2940vt100-putty|Reset PuTTY to pure vt100,
2941	rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
2942	use=vt100,
2943# palette is hardcoded...
2944putty-256color|PuTTY 0.58 with xterm 256-colors,
2945	initc@, use=xterm+256color, use=putty,
2946
2947# One of the keyboard selections is "VT100+".
2948# pterm (the X11 port) uses shifted F1-F10 as F11-F20
2949putty-vt100|VT100+ keyboard layout,
2950	kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
2951	kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
2952	kf9=\EOX, use=putty,
2953
2954# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
2955# T. Teranishi dated Mar 10, 1998.  It is a free software terminal emulator
2956# (communication program) which supports:
2957#
2958#	- Serial port connections.
2959#	- TCP/IP (telnet) connections.
2960#	- VT100 emulation, and selected VT200/300 emulation.
2961#	- TEK4010 emulation.
2962#	- File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
2963#	  Quick-VAN).
2964#	- Scripts using the "Tera Term Language".
2965#	- Japanese and Russian character sets.
2966#
2967# The program does not come with terminfo or termcap entries.  However, the
2968# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
2969# vt52 or doublesize character support; blinking is done with color).  Besides
2970# the HPA, VPA extensions it also implements CPL and CNL.
2971#
2972# All of the function keys can be remapped.  This description shows the default
2973# mapping, as installed.  Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
2974# are supported.  F13-F20 are obtained by shifting F3-F10.  The editing keypad
2975# is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
2976#	kfnd	Insert
2977#	kslt	Delete
2978#	kich1	Home
2979#	kdch1	PageUp
2980#	kpp	End
2981#	knp	PageDown
2982#
2983# ANSI colors are implemented, but cannot be combined with video attributes
2984# except for reverse.
2985#
2986# No fonts are supplied with the program, so the acsc string is chosen to
2987# correspond with the default Microsoft terminal font.
2988#
2989# Tera Term recognizes some xterm sequences, including those for setting and
2990# retrieving the window title, and for setting the window size (i.e., using
2991# "resize -s"), though it does not pass SIGWINCH to the application if the
2992# user resizes the window with the mouse.
2993teraterm2.3|Tera Term Pro,
2994	km, xon@,
2995	ncv#43, vt@,
2996	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
2997	blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2998	cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2999	cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3000	dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3001	flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
3002	il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
3003	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3004	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3005	kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
3006	kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3007	kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
3008	kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
3009	rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
3010	smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
3011	use=klone+color, use=vt100,
3012
3013# Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
3014# to choose a Windows OEM font).
3015#
3016# Testing with tack:
3017#	- it does not have xenl (suppress that)
3018#	- underline seems to work with color (modify ncv).
3019# Testing with vttest:
3020#	- wrapping differs from vt100 (menu 1).
3021#	- it recognizes xterm's X10 and normal mouse tracking, but none of the
3022#	  other flavors.
3023#	- it recognizes the dtterm window controls for reporting size in
3024#	  characters and pixels.
3025#	- it passes SIGWINCH.
3026teraterm4.59|Tera Term Pro,
3027	bce, xenl@,
3028	ncv#41,
3029	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3030	kmous=\E[M, use=teraterm2.3,
3031
3032teraterm|Tera Term,
3033	use=teraterm4.59,
3034
3035# Tested with WinNT 4.0, the telnet application assumes the screensize is
3036# 25x80.  This entry uses the 'Terminal' font, to get line-drawing characters.
3037#
3038# Other notes:
3039# a) Fails tack's cup (cursor-addressing) test, though cup works well enough
3040#    for casual (occasional) use.  Also fails several of the vttest screens,
3041#    but that is not unusual for vt100 "emulators".
3042# b) Does not implement vt100 keypad
3043# c) Recognizes a subset of vt52 controls.
3044ms-vt100|MS telnet imitating dec vt100,
3045	lines#25,
3046	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3047	ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
3048	kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
3049
3050# Tested with Windows 2000, the telnet application runs in a console window,
3051# also using 'Terminal' font.
3052#
3053# Other notes:
3054# a) This version has no function keys or numeric keypad.  Unlike the older
3055#    version, the numeric keypad is entirely ignored.
3056# b) The program sets $TERM to "ansi", which of course is inaccurate.
3057ms-vt100-color|vtnt|windows 2000 ansi (sic),
3058	bce,
3059	dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
3060	use=ms-vt100,
3061
3062# Based on comments from Federico Bianchi:
3063#
3064#	vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
3065#	scheme for PF keys.
3066#
3067# and PuTTY wishlist:
3068#
3069#	The modifiers are represented as the codes listed above, prefixed to
3070#	the normal sequences.  If the modifier is pressed alone, its sequence
3071#	is transmitted twice in succession.  If multiple modifiers apply,
3072#	they're transmitted in the order shift, control, alt.
3073#
3074#	Shift	\E^S
3075#	Alt	\E^A,
3076#	Ctrl	\E^C,
3077ms-vt100+|vt100+|windows XP vt100+ (sic),
3078	kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
3079	kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
3080	kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
3081	kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
3082	kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
3083	kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
3084	kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
3085	kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
3086	kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
3087	kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
3088	kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
3089	kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
3090	kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
3091	kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
3092	knp=\E/, kpp=\E?, use=ms-vt100-color,
3093
3094ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
3095	use=ms-vt100+,
3096
3097# expect-5.44.1.15/example/tkterm
3098# a minimal subset of a vt100 (compare with "news-unk).
3099#
3100# The missing "=" in smkx is not a typo (here), but an error in tkterm.
3101tt|tkterm|Don Libes' tk text widget terminal emulator,
3102	clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3103	cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ,
3104	kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3105	kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3106	smso=\E[7m,
3107
3108######## X TERMINAL EMULATORS
3109#### XTERM
3110#
3111# You can add the following line to your .Xdefaults to change the terminal type
3112# set by the xterms you start up to my-xterm:
3113#
3114# *termName:  my-xterm
3115#
3116# System administrators can change the default entry for xterm instances
3117# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm.  In either
3118# case, xterm will detect and reject an invalid terminal type, falling back
3119# to the default of xterm.
3120#
3121
3122# X10/6.6	11/7/86, minus alternate screen, plus (csr)
3123# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
3124# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
3125# as these seem not to work -- esr)
3126x10term|vs100-x10|xterm terminal emulator (X10 window system),
3127	OTbs, am, km, mir, msgr, xenl, xon,
3128	cols#80, it#8, lines#65,
3129	bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
3130	cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3131	cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3132	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
3133	il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
3134	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
3135	kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
3136	rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3137	sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
3138	smso=\E[7m, smul=\E[4m,
3139# Compatible with the R5 xterm
3140# (from the XFree86 3.2 distribution, <blink=@> removed)
3141# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
3142# corrected typos in rs2 string - TD
3143# added u6-u9 -TD
3144xterm-r5|xterm R5 version,
3145	OTbs, am, km, msgr, xenl,
3146	cols#80, it#8, lines#24,
3147	bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3148	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3149	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3150	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3151	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3152	el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3153	il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3154	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
3155	kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
3156	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3157	kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3158	kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
3159	kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
3160	rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3161	rmul=\E[m,
3162	rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
3163	sc=\E7,
3164	sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
3165	sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
3166	smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3167# Compatible with the R6 xterm
3168# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
3169# added khome/kend, hts based on the R6 xterm code - TD
3170# (khome/kend do not actually work in X11R5 or X11R6, but many people use this
3171# for compatibility with other emulators).
3172xterm-r6|xterm-old|xterm X11R6 version,
3173	OTbs, am, km, mir, msgr, xenl,
3174	cols#80, it#8, lines#24,
3175	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3176	bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3177	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3178	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3179	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3180	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3181	el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
3182	il1=\E[L, ind=^J,
3183	is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
3184	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3185	kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3186	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3187	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3188	kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3189	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3190	kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3191	kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
3192	rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
3193	rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3194	rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
3195	sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3196	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3197	use=vt100+enq,
3198# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
3199# The name has been changed and some aliases have been removed.
3200xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
3201	OTbs, am, bce, km, mir, msgr, xenl,
3202	cols#80, it#8, lines#24, ncv@,
3203	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3204	bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3205	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3206	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3207	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3208	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3209	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3210	ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3211	flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3212	ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3213	il1=\E[L, ind=^J,
3214	is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3215	kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
3216	kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
3217	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
3218	kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
3219	kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
3220	kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3221	kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
3222	kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
3223	memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3224	rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3225	rmso=\E[27m, rmul=\E[24m, rs1=^O,
3226	rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
3227	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3228	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3229	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3230	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3231	smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3232	tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3233	use=ecma+color, use=vt220+keypad,
3234
3235# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
3236# codes for F1-F4 except while in VT220 mode.
3237xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
3238	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
3239
3240# This version was released in XFree86 3.3.3 (November 1998).
3241# Besides providing printer support, it exploits a new feature that allows
3242# xterm to use terminfo-based descriptions with the titeInhibit resource.
3243# -- the distribution contained incorrect khome/kend values -TD
3244xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
3245	mc5i,
3246	blink=\E[5m, ich1@, invis=\E[8m,
3247	is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
3248	mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
3249	rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
3250	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3251	smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
3252
3253# This version was released in XFree86 4.0.
3254xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
3255	npc,
3256	kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
3257	kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
3258	ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
3259	kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3260	kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
3261	kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3262	kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3263	kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
3264	kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
3265	kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
3266	kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
3267	kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
3268	kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
3269	kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
3270	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3271	smcup=\E[?1049h, use=xterm-xf86-v333,
3272
3273# This version was released in XFree86 4.3.
3274xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
3275	kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3276	kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
3277	kbeg@,
3278	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3279	use=xterm-xf86-v40,
3280
3281# This version was released in XFree86 4.4.
3282xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
3283	cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
3284	rin=\E[%p1%dT, use=xterm-xf86-v43,
3285
3286xterm-xfree86|xterm terminal emulator (XFree86),
3287	use=xterm-xf86-v44,
3288
3289# This version reflects the current xterm features.
3290xterm-new|modern xterm terminal emulator,
3291	npc,
3292	indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
3293	rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
3294	use=xterm-basic,
3295#
3296# This fragment describes as much of XFree86 xterm's "pc-style" function
3297# keys as will fit into terminfo's 60 function keys.
3298# From ctlseqs.ms:
3299#    Code     Modifiers
3300#  ---------------------------------
3301#     2       Shift
3302#     3       Alt
3303#     4       Shift + Alt
3304#     5       Control
3305#     6       Shift + Control
3306#     7       Alt + Control
3307#     8       Shift + Alt + Control
3308#  ---------------------------------
3309# The meta key may also be used as a modifier in this scheme, adding another
3310# bit to the parameter.
3311xterm+pcfkeys|fragment for PC-style fkeys,
3312	use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3313	use=xterm+pce2,
3314#
3315xterm+noapp|fragment with cursor keys in normal mode,
3316	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
3317	khome=\E[H,
3318
3319xterm+app|fragment with cursor keys in application mode,
3320	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
3321	khome=\EOH,
3322#
3323# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
3324# and revised in patch #167 (2002/8/24).  Some other terminal emulators copied
3325# the earlier scheme, as noted in the "use=" clauses in this file.
3326#
3327# The original assignments from patch #94 for cursor-keys had some technical
3328# issues:
3329#
3330#	A parameter for a function-key to represent a modifier is just more
3331#	bits.  But for a cursor-key it may change the behavior of the
3332#	application.  For instance, emacs decodes the first parameter of a
3333#	cursor-key as a repeat count.
3334#
3335#	A parameterized string should (really) not begin with SS3 (\EO).
3336#	Rather, CSI (\E[) should be used.
3337#
3338# For these reasons, the original assignments were deprecated.  For
3339# compatibility reasons, they are still available as a setting of xterm's
3340# modifyCursorKeys resource.  These fragments list the modified cursor-keys
3341# that might apply to xterm+pcfkeys with different values of that resource.
3342xterm+pcc3|fragment with modifyCursorKeys:3,
3343	kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
3344	kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
3345	kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
3346	kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
3347	kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
3348	kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
3349	kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
3350	kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
3351	kUP7=\E[>1;7A,
3352
3353xterm+pcc2|fragment with modifyCursorKeys:2,
3354	kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
3355	kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
3356	kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
3357	kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
3358	kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
3359	kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
3360	kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
3361
3362xterm+pcc1|fragment with modifyCursorKeys:1,
3363	kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
3364	kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
3365	kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
3366	kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
3367	kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
3368	kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
3369
3370xterm+pcc0|fragment with modifyCursorKeys:0,
3371	kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
3372	kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
3373	kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
3374	kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
3375	kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
3376	kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
3377
3378#
3379# Here are corresponding fragments from xterm patch #216:
3380#
3381xterm+pcf0|fragment with modifyFunctionKeys:0,
3382	kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3383	kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3384	kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3385	kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3386	kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3387	kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
3388	kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3389	kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3390	kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
3391	kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
3392	kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3393	kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
3394	kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
3395	kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
3396	kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
3397	kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
3398	kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3399#
3400xterm+pcf2|fragment with modifyFunctionKeys:2,
3401	kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3402	kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
3403	kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3404	kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3405	kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
3406	kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
3407	kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3408	kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3409	kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
3410	kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
3411	kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3412	kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
3413	kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
3414	kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
3415	kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
3416	kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
3417	kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
3418	kf8=\E[19~, kf9=\E[20~,
3419#
3420# Chunks from xterm #230:
3421xterm+pce2|fragment with modifyCursorKeys:2,
3422	kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3423	kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
3424	kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
3425	kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
3426	kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
3427	kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
3428	kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
3429	kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
3430	kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
3431	kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
3432	kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
3433	use=xterm+edit,
3434
3435xterm+edit|fragment for 6-key editing-keypad,
3436	kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3437	use=xterm+pc+edit,
3438
3439xterm+pc+edit|fragment for pc-style editing keypad,
3440	kend=\E[4~, khome=\E[1~,
3441
3442xterm+vt+edit|fragment for vt220-style editing keypad,
3443	kfnd=\E[1~, kslt=\E[4~,
3444
3445#
3446# Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
3447# Alternatively, the same scheme with old-style function keys as in xterm-r6
3448# is shown here (because that is used in mrxvt and mlterm):
3449xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
3450	kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3451	kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
3452	kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
3453	kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
3454	kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
3455	kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
3456	kf63=\E[13;4~, use=xterm+pcf2,
3457#
3458# This chunk is used for building the VT220/Sun/PC keyboard variants.
3459xterm-basic|modern xterm terminal emulator - common,
3460	OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX,
3461	colors#8, cols#80, it#8, lines#24, pairs#64,
3462	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3463	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3464	clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
3465	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3466	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3467	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3468	cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3469	dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3470	flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3471	ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
3472	ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H,
3473	kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
3474	memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
3475	rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
3476	rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m,
3477	rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
3478	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3479	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3480	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3481	sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
3482	sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
3483	smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
3484	smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3485
3486# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
3487# In retrospect, something like xterm-r6 was intended here -TD
3488xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
3489	rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
3490
3491# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
3492# If configured to support 88- or 256-colors (which is fairly common in 2009),
3493# xterm also recognizes the control sequences for initc -TD
3494xterm-16color|xterm with 16 colors like aixterm,
3495	ccc,
3496	initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3497	use=ibm+16color, use=xterm-new,
3498
3499# 256-colors is a compile-time feature of XFree86 xterm beginning with
3500# patch #111 (1999/7/10) -TD
3501xterm+256color|xterm 256-color feature,
3502	ccc,
3503	colors#256, pairs#32767,
3504	initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3505	setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
3506	setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
3507	setb@, setf@,
3508
3509# 88-colors is a compile-time feature of XFree86 xterm beginning with
3510# patch #115 (1999/9/18) -TD
3511#
3512# Note that the escape sequences used are the same as for 256-colors - xterm
3513# has a different table of default color resource values.  If built for
3514# 256-colors, it can still handle an 88-color palette by using the initc
3515# capability.
3516#
3517# At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
3518# which support the xterm+256color feature support the associated initc
3519# capability.  So it is cancelled in the entries which use this and/or the
3520# xterm+256color block.
3521#
3522# The default color palette for the 256- and 88-colors are different.  A
3523# given executable will have one palette (perhaps compiled-in).  If the program
3524# supports xterm's control sequence, it can be programmed using initc.
3525xterm+88color|xterm 88-color feature,
3526	colors#88, pairs#7744, use=xterm+256color,
3527
3528# These variants of XFree86 3.9.16 xterm are built as a configure option.
3529xterm-256color|xterm with 256 colors,
3530	use=xterm+256color, use=xterm-new,
3531xterm-88color|xterm with 88 colors,
3532	use=xterm+88color, use=xterm-256color,
3533
3534# These two are used to demonstrate the any-event mouse support, i.e., by
3535# using an extended name "XM" which tells ncurses to put the terminal into
3536# a special mode when initializing the xterm mouse.
3537xterm-1002|testing xterm-mouse,
3538	XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
3539xterm-1003|testing xterm-mouse,
3540	XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
3541
3542# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
3543# asked for some of xterm's advanced features to be added to its terminfo
3544# entry.  It defines extended capabilities not found in standard terminfo or
3545# termcap.  These are useful in tmux, for instance, hence the name.
3546#
3547# One caveat in adding extended capabilities in ncurses is that if the names
3548# are longer than two characters, then they will not be visible through the
3549# termcap interface.
3550#
3551# Ms modifies the selection/clipboard.  Its parameters are
3552#	p1 = the storage unit (clipboard, selection or cut buffer)
3553#	p2 = the base64-encoded clipboard content.
3554#
3555# Ss is used to set the cursor style as described by the DECSCUSR
3556#	function to a block or underline.
3557# Se resets the cursor style to the terminal power-on default.
3558#
3559# Cs and Ce set and reset the cursor colour.
3560xterm+tmux|advanced xterm features used in tmux,
3561	Cr=\E]112\007, Cs=\E]12;%p1%s\007,
3562	Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
3563
3564# This is another variant, for XFree86 4.0 xterm (T.Dickey)
3565# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
3566# To use it, your decTerminalID resource must be set to 200 or above.
3567#
3568#	HTS	\E H	\210
3569#	RI	\E M	\215
3570#	SS3	\E O	\217
3571#	CSI	\E [	\233
3572#
3573xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
3574	OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
3575	colors#8, cols#80, it#8, lines#24, pairs#64,
3576	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3577	bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
3578	civis=\233?25l, clear=\233H\2332J,
3579	cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
3580	cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
3581	cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
3582	cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
3583	dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3584	ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
3585	flash=\233?5h$<100/>\233?5l, home=\233H,
3586	hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
3587	il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
3588	is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3589	ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
3590	kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
3591	kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
3592	kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
3593	kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
3594	kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
3595	kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
3596	kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3597	kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
3598	knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
3599	meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
3600	ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
3601	rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
3602	rs1=\Ec,
3603	rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3604	sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
3605	setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3606	setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3607	sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
3608	sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
3609	smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
3610	smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
3611	u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
3612
3613xterm-hp|xterm with hpterm function keys,
3614	kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
3615	kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
3616	kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
3617	knp=\ES, kpp=\ET, use=xterm-basic,
3618
3619xterm-sco|xterm with SCO function keys,
3620	kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3621	kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3622	kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3623	kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3624	kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3625	kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3626	kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3627	kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3628	kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3629	kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3630	kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3631	kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
3632	use=xterm-basic,
3633
3634# The xterm-new description has all of the features, but is not completely
3635# compatible with vt220.  If you are using a Sun or PC keyboard, set the
3636# sunKeyboard resource to true:
3637#	+ maps the editing keypad
3638#	+ interprets control-function-key as a second array of keys, so a
3639#	  12-fkey keyboard can support vt220's 20-fkeys.
3640#	+ maps numeric keypad "+" to ",".
3641#	+ uses DEC-style control sequences for the application keypad.
3642#
3643xterm-vt220|xterm emulating vt220,
3644	kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3645	kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3646	kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3647	kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
3648	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3649	khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3650	use=xterm+app, use=xterm+edit, use=xterm-basic,
3651	use=vt220+keypad,
3652
3653xterm-vt52|xterm emulating dec vt52,
3654	cols#80, it#8, lines#24,
3655	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3656	bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
3657	cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
3658	home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
3659	kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
3660
3661xterm-noapp|xterm with cursor keys in normal mode,
3662	rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
3663	use=xterm,
3664
3665xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
3666	lines#24, use=xterm-old,
3667
3668# This is xterm for ncurses.
3669xterm|xterm terminal emulator (X Window System),
3670	use=xterm-new,
3671
3672# This entry assumes that xterm's handling of VT100 SI/SO is disabled by
3673# setting the vt100Graphics resource to false.
3674xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
3675	U8#1, use=xterm,
3676
3677# These entries allow access to the X titlebar and icon name as a status line.
3678# Note that twm (and possibly window managers descended from it such as tvtwm,
3679# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
3680# with it.
3681xterm+sl|access X title line and icon name,
3682	hs,
3683	wsl#40,
3684	dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
3685xterm+sl-twm|access X title line (pacify twm-descended window managers),
3686	hs,
3687	wsl#40,
3688	dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
3689
3690#
3691# The following xterm variants don't depend on your base version
3692#
3693# xterm with bold instead of underline
3694xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
3695	smso=\E[7m, smul=\E[1m, use=xterm-old,
3696
3697# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
3698xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
3699	ich@, ich1@, use=xterm,
3700# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
3701xterm1|xterm terminal emulator ignoring the alternate screen buffer,
3702	rmcup@, smcup@, use=xterm,
3703
3704#### KTERM
3705# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
3706# (kterm should not invoke DEC Graphics as the alternate character set
3707#  -- Kenji Rikitake)
3708# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
3709#  -- MATSUMOTO Shoji)
3710# kterm implements acsc via built-in table of X Drawable's
3711kterm|kterm kanji terminal emulator (X window system),
3712	eslok, hs, XT,
3713	ncv@,
3714	acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
3715	csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
3716	kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
3717	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3718	sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
3719	tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
3720kterm-color|kterm-co|kterm with ANSI colors,
3721	ncv@, use=kterm, use=ecma+color,
3722
3723#### Other XTERM
3724# These (xtermc and xtermm) are distributed with Solaris.  They refer to a
3725# variant of xterm which is apparently no longer supported, but are interesting
3726# because they illustrate SVr4 curses mouse controls - T.Dickey
3727xtermm|xterm terminal emulator (monocrome),
3728	OTbs, am, km, mir, msgr, xenl,
3729	btns#3, cols#80, it#8, lines#24,
3730	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3731	bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3732	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
3733	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3734	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3735	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3736	el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
3737	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3738	il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3739	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
3740	kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
3741	kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
3742	knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
3743	rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
3744	rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
3745	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3746	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3747	sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
3748	smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
3749
3750xtermc|xterm terminal emulator (color),
3751	colors#8, ncv#7, pairs#64,
3752	op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3753	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3754	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3755	use=xtermm,
3756
3757# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
3758# Here's a termcap entry I've been using for xterm_color, which comes
3759# with BSD/OS 2.0, and the X11R6 contrib tape too I think.  Besides the
3760# color stuff, I also have a status line defined as the window manager
3761# title bar. [I have translated it to terminfo -- ESR]
3762xterm-pcolor|xterm with color used for highlights and status line,
3763	bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
3764	smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
3765
3766# This describes the capabilities of color_xterm, an xterm variant from
3767# before ECMA-64 color support was folded into the main-line xterm release.
3768# This entry is straight from color_xterm's maintainer.
3769# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
3770# The README's with the distribution also say that it supports SGR 21, 24, 25
3771# and 27, but they are not present in the terminfo or termcap.
3772color_xterm|cx|cx100|color_xterm color terminal emulator for X,
3773	OTbs, am, km, mir, msgr, xenl, XT,
3774	cols#80, it#8, lines#65, ncv@,
3775	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3776	bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3777	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3778	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3779	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3780	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3781	el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
3782	ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3783	is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
3784	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
3785	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3786	kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3787	kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
3788	kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
3789	rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
3790	rmso=\E[27m, rmul=\E[24m,
3791	rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
3792	sc=\E7,
3793	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3794	sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
3795	smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
3796	smul=\E[4m, use=ecma+color, use=vt220+keypad,
3797
3798# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
3799# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
3800# SGR 39 or 49.  SGR 0 does reset colors (along with everything else).  This
3801# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
3802# that each of those implements the home, end, delete keys differently.
3803#
3804# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
3805# colors; note that this is not compatible with the 5.2 version.
3806# csw (2002-05-15): make xterm-color primary instead of nxterm, to
3807#   match XFree86's xterm.terminfo usage and prevent circular links
3808xterm-color|nxterm|generic color xterm,
3809	ncv@,
3810	op=\E[m, use=xterm-r6, use=klone+color,
3811
3812# This entry describes an xterm with Sun-style function keys enabled
3813# via the X resource setting "xterm*sunFunctionKeys:true"
3814# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
3815# The <kf13>...<kf20> keys are L3-L10.  We don't set <kf16=\E[197z>
3816# because we want it to be seen as <kcpy>.
3817# The <kf31>...<kf45> keys are R1-R15.  We treat some of these in accordance
3818# with their Sun keyboard labels instead.
3819# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
3820xterm-sun|xterm with sunFunctionKeys true,
3821	kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
3822	kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
3823	kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
3824	kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
3825	kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
3826	kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
3827	kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
3828	kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
3829	kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
3830	kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
3831	kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
3832	kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
3833	use=xterm-basic,
3834xterms-sun|small (80x24) xterm with sunFunctionKeys true,
3835	cols#80, lines#24, use=xterm-sun,
3836
3837#### GNOME (VTE)
3838# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
3839gnome-rh62|Gnome terminal,
3840	bce,
3841	kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3842	use=xterm-color,
3843
3844# GNOME Terminal 1.4.0.4 (Redhat 7.2)
3845#
3846# This implements a subset of vt102 with a random selection of features from
3847# other terminals such as color and function-keys.
3848#
3849# shift-f1 to shift-f10 are f11 to f20
3850#
3851# NumLock changes the application keypad to approximate vt100 keypad, except
3852# that there is no escape sequence matching comma (,).
3853#
3854# Other defects observed:
3855#	vt100 LNM mode is not implemented.
3856#	vt100 80/132 column mode is not implemented.
3857#	vt100 DECALN is not implemented.
3858#	vt100 DECSCNM mode is not implemented, so flash does not work.
3859#	vt100 TBC (tab reset) is not implemented.
3860#	xterm alternate screen controls do not restore cursor position properly
3861#	it hangs in tack after running function-keys test.
3862gnome-rh72|GNOME Terminal,
3863	bce, km@,
3864	civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
3865	kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
3866	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
3867	sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
3868
3869# GNOME Terminal 2.0.1 (Redhat 8.0)
3870#
3871# Documentation now claims it implements vt220 (which is demonstrably false).
3872# However, it does implement ECH, which is a vt220 feature.  And there are
3873# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
3874# more of its bugs using vttest.
3875#
3876# However, note that bce and msgr are broken in this release.  Tabs (tbc and
3877# hts) are broken as well.  Sometimes flash (as in xterm-new) works.
3878#
3879# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
3880# operations.  Shift-tab generates a distinct sequence so it can be argued
3881# that it implements kcbt.
3882gnome-rh80|GNOME Terminal,
3883	bce@, msgr@,
3884	ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
3885	kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
3886
3887# GNOME Terminal 2.2.1 (Redhat 9.0)
3888#
3889# bce and msgr are repaired.
3890gnome-rh90|GNOME Terminal,
3891	bce, msgr,
3892	hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
3893	kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
3894	vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
3895	use=gnome-rh80,
3896
3897# GNOME Terminal 2.14.2 (Fedora Core 5)
3898# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
3899gnome-fc5|GNOME Terminal,
3900	rs1=\Ec,
3901	rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3902	use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
3903
3904# GNOME Terminal 2.18.1 (2007 snapshot)
3905#
3906# For any "recent" version of gnome-terminal, it is futile to attempt to
3907# support modifiers on cursor- and keypad keys because the program usually
3908# is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
3909# of the keys (which more/less correspond to the termcap values), and will
3910# interpret those according to the $TERM value, but others not in the
3911# terminfo according to some constantly changing set of hacker guidelines -TD
3912vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
3913	use=xterm+pcc2, use=gnome-fc5,
3914gnome-2007|GNOME Terminal snapshot 2.18.1,
3915	use=vte-2007,
3916
3917# GNOME Terminal 2.22.3 (2008 snapshot)
3918#
3919# In vttest, it claims to be a vt220 with national replacement character-sets,
3920# but aside from the identifier string, implements only a small fraction of
3921# vt220's behavior, which will make it less usable on a VMS system (unclear
3922# what the intent of the developer is, since the NRC feature exposed in vttest
3923# by this change does not work).
3924vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
3925	use=vte+pcfkeys, use=vte-2007,
3926gnome-2008|GNOME Terminal snapshot 2.22.3,
3927	use=vte-2008,
3928
3929# GNOME terminal may automatically use the contents of the "xterm" terminfo to
3930# supply key information which is not built into the program.  With 2.22.3,
3931# this list is built into the program (which addresses the inadvertant use of
3932# random terminfo data, though using a set of values which does not correspond
3933# to any that xterm produces - still not solving the problem that GNOME
3934# terminal hardcodes the $TERM variable as "xterm").
3935#
3936#	terminfo	modifier	code	keys
3937#	kf13-kf24	shift		2	F1 to F12
3938#	kf25-kf36	control		5	F1 to F12
3939#	kf37-kf48	shift/control	6	F1 to F12
3940#	kf49-kf60	alt		3	F1 to F12
3941#	kf61-kf63	shift-alt	4	F1 to F3
3942#
3943# The parameters with \EO (SS3) are technically an error, since SS3 should have
3944# no parameters.  This appears to be rote copying based on xterm+pcc0.
3945vte+pcfkeys|VTE's variation on xterm+pcfkeys,
3946	kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
3947	kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
3948	kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
3949	kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
3950	kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
3951	kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
3952	use=xterm+pcfkeys,
3953gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
3954	use=vte+pcfkeys,
3955
3956vte|VTE aka GNOME Terminal,
3957	use=vte-2008,
3958gnome|GNOME Terminal,
3959	use=vte,
3960
3961# palette is hardcoded...
3962vte-256color|VTE with xterm 256-colors,
3963	initc@, use=xterm+256color, use=vte,
3964gnome-256color|GNOME Terminal with xterm 256-colors,
3965	use=vte-256color,
3966
3967# XFCE Terminal 0.2.5.4beta2
3968#
3969# This is based on some of the same source code, e.g., the VTE library, as
3970# gnome-terminal, but has fewer features, fails more screens in vttest.
3971# Since most of the terminfo-related behavior is due to the VTE library,
3972# the terminfo is the same as gnome-terminal.
3973xfce|Xfce Terminal,
3974	use=vte,
3975
3976#### Other GNOME
3977# Multi-Gnome-Terminal 1.6.2
3978#
3979# This does not use VTE, and does have different behavior (compare xfce and
3980# gnome).
3981mgt|Multi GNOME Terminal,
3982	indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
3983
3984#### KDE
3985# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
3986# or not is debatable).
3987kvt|KDE terminal,
3988	bce, km@,
3989	kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
3990
3991# Konsole 1.0.1
3992# (formerly known as kvt)
3993#
3994# This program hardcodes $TERM to 'xterm', which is not accurate.  However, to
3995# simplify this entry (and point out why konsole isn't xterm), we base this on
3996# xterm-r6.  The default keyboard appears to be 'linux'.
3997#
3998# Notes:
3999# a) konsole implements several features from XFree86 xterm, though none of
4000#    that is documented - except of course in its source code - apparently
4001#    because its implementors are unaccustomed to reading documentation - as
4002#    evidenced by the sparse and poorly edited documentation distributed with
4003#    konsole.  Some features such as the 1049 private mode are recognized but
4004#    incorrectly implemented as a duplicate of the 47 private mode.
4005# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
4006#    sends PC-style escapes rather than vt100.
4007# c) fails vttest menu 3 (Test of character sets) because it does not properly
4008#    parse some control sequences.  Also fails vttest Primary Device Attributes
4009#    by sending a bogus code (in the source it says it's supposed to be a
4010#    vt220, which is doubly incorrect because it does not implement vt220
4011#    control sequences except for a few special cases).  Treat it as a
4012#    mildly-broken vt102.
4013#
4014# Update for konsole 1.3.2:
4015#    The 1049 private mode works (but see the other xterm screens in vttest).
4016#    Primary Device Attributes now returns the code for a vt100 with advanced
4017#    video option.  Perhaps that's intended to be a "mildly-broken vt102".
4018#
4019# Updated for konsole 1.6.4:
4020#    add konsole-solaris
4021#
4022# Updated for konsole 1.6.6:
4023#    add control-key modifiers for function-keys, etc.
4024#
4025# vttest menu 1 shows that both konsole and gnome terminal do wrapping
4026# different from xterm (and vt100's).  They have the same behavior in this
4027# detail, but it is unclear which copies the other.
4028konsole-base|KDE console window,
4029	bce, km@, npc, XT,
4030	ncv@,
4031	bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
4032	ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
4033	hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@,
4034	kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
4035	kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
4036	kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
4037	rmso=\E[27m, rmul=\E[24m,
4038	rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4039	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4040	sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
4041	use=ecma+color, use=xterm-r6,
4042konsole-linux|KDE console window with linux keyboard,
4043	kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
4044	kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@,
4045	kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
4046	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4047	use=konsole-base,
4048konsole-solaris|KDE console window with Solaris keyboard,
4049	kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4050# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
4051# than testing the code.
4052konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
4053	kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4054# The value for kbs reflects local customization rather than the settings used
4055# for XFree86 xterm.
4056konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
4057	kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
4058	use=konsole-vt100,
4059# Konsole does not implement shifted cursor-keys.
4060konsole+pcfkeys|konsole subset of xterm+pcfkeys,
4061	kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
4062	use=xterm+pcf0,
4063# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
4064# it is still useful for deriving the other entries.
4065konsole-vt100|KDE console window with vt100 (sic) keyboard,
4066	kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
4067	kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
4068	kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
4069	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4070	khome=\E[H, use=konsole-base,
4071konsole-vt420pc|KDE console window with vt420 pc keyboard,
4072	kbs=^H, kdch1=\177, use=konsole-vt100,
4073konsole-16color|klone of xterm-16color,
4074	ncv#32, use=ibm+16color, use=konsole,
4075# make a default entry for konsole
4076konsole|KDE console window,
4077	use=konsole-xf4x,
4078
4079# palette is hardcoded...
4080konsole-256color|KDE console window with xterm 256-colors,
4081	initc@, use=xterm+256color, use=konsole,
4082
4083#### MLTERM
4084# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
4085#
4086# It is nominally a vt102 emulator, with features borrowed from rxvt and
4087# xterm.
4088#
4089# The function keys are numbered based on shift/control/alt modifiers, except
4090# that the control-modifier itself is used to spawn a new copy of mlterm (the
4091# "-P" option).  So control/F1 to control/F12 may not be usable, depending on
4092# how it is configured.
4093#
4094#				kf1 to kf12	\E[11~   to \E[24~
4095#	shift			kf1 to kf12	\E[11;2~ to \E[24;2~
4096#	alt			kf1 to kf12	\E[11;3~ to \E[24;3~
4097#	shift/alt		kf1 to kf12	\E[11;4~ to \E[24;4~
4098#	control			kf1 to kf12	\E[11;5~ to \E[24;5~ (maybe)
4099#	control/shift		kf1 to kf12	\E[11;6~ to \E[24;6~
4100#	control/alt		kf1 to kf12	\E[11;7~ to \E[24;7~
4101#	control/shift/alt	kf1 to kf12	\E[11;8~ to \E[24;8~
4102#
4103mlterm|multi lingual terminal emulator,
4104	am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
4105	colors#8, cols#80, it#8, lines#24, pairs#64,
4106	acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4107	bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4108	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4109	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4110	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4111	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4112	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4113	ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
4114	home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4115	ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
4116	is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4117	kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4118	kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
4119	khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
4120	knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
4121	nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4122	rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4123	rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
4124	rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
4125	sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4126	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4127	sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
4128	smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4129	tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
4130	vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
4131
4132# The insert/delete/home/end keys do not respond to modifiers because mlterm
4133# looks in its termcap to decide which string to send.  If it used terminfo
4134# (when available), it could use the extended names introduced for xterm.
4135mlterm+pcfkeys|fragment for PC-style fkeys,
4136	kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
4137	kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
4138	kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
4139	kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
4140	kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
4141	kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
4142	kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
4143	kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
4144	kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
4145
4146mlterm-256color|mlterm 3.0 with xterm 256-colors,
4147	use=xterm+256color, use=rxvt,
4148
4149#### RXVT
4150# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
4151# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
4152# Notes:
4153# rxvt 2.21b uses
4154#	smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
4155# but some applications don't work with that.
4156# It also has an AIX extension
4157#	box2=lqkxjmwuvtn,
4158# and
4159#	ech=\E[%p1%dX,
4160# but the latter does not work correctly.
4161#
4162# The distributed terminfo says it implements hpa and vpa, but they are not
4163# implemented correctly, using relative rather than absolute positioning.
4164#
4165# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
4166# Since rxvt is not really compatible with xterm, it should be configured as
4167# "rxvt" or "rxvt-color".
4168#
4169# removed dch/dch1 because they are inconsistent with bce/ech -TD
4170# remove km as per tack test -TD
4171rxvt-basic|rxvt terminal base (X Window System),
4172	OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
4173	cols#80, it#8, lines#24,
4174	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4175	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4176	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4177	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4178	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4179	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4180	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
4181	enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
4182	hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
4183	ind=^J, is1=\E[?47l\E=\E[?1l,
4184	is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
4185	kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4186	rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
4187	rmul=\E[24m,
4188	rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4189	rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4190	s0ds=\E(B, s1ds=\E(0, sc=\E7,
4191	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4192	sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4193	smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
4194	use=rxvt+pcfkeys, use=vt220+keypad,
4195# Key Codes from rxvt reference:
4196#
4197# Note: Shift + F1-F10 generates F11-F20
4198#
4199# For the keypad, use Shift to temporarily override Application-Keypad
4200# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
4201# is off, escape sequences toggle Application-Keypad setting.
4202# Also note that values of Home, End, Delete may have been compiled
4203# differently on your system.
4204#
4205#                   Normal       Shift        Control      Ctrl+Shift
4206#  Tab              ^I           ESC [ Z      ^I           ESC [ Z
4207#  BackSpace        ^H           ^?           ^?           ^?
4208#  Find             ESC [ 1 ~    ESC [ 1 $    ESC [ 1 ^    ESC [ 1 @
4209#  Insert           ESC [ 2 ~    paste        ESC [ 2 ^    ESC [ 2 @
4210#  Execute          ESC [ 3 ~    ESC [ 3 $    ESC [ 3 ^    ESC [ 3 @
4211#  Select           ESC [ 4 ~    ESC [ 4 $    ESC [ 4 ^    ESC [ 4 @
4212#  Prior            ESC [ 5 ~    scroll-up    ESC [ 5 ^    ESC [ 5 @
4213#  Next             ESC [ 6 ~    scroll-down  ESC [ 6 ^    ESC [ 6 @
4214#  Home             ESC [ 7 ~    ESC [ 7 $    ESC [ 7 ^    ESC [ 7 @
4215#  End              ESC [ 8 ~    ESC [ 8 $    ESC [ 8 ^    ESC [ 8 @
4216#  Delete           ESC [ 3 ~    ESC [ 3 $    ESC [ 3 ^    ESC [ 3 @
4217#  F1               ESC [ 11 ~   ESC [ 23 ~   ESC [ 11 ^   ESC [ 23 ^
4218#  F2               ESC [ 12 ~   ESC [ 24 ~   ESC [ 12 ^   ESC [ 24 ^
4219#  F3               ESC [ 13 ~   ESC [ 25 ~   ESC [ 13 ^   ESC [ 25 ^
4220#  F4               ESC [ 14 ~   ESC [ 26 ~   ESC [ 14 ^   ESC [ 26 ^
4221#  F5               ESC [ 15 ~   ESC [ 28 ~   ESC [ 15 ^   ESC [ 28 ^
4222#  F6               ESC [ 17 ~   ESC [ 29 ~   ESC [ 17 ^   ESC [ 29 ^
4223#  F7               ESC [ 18 ~   ESC [ 31 ~   ESC [ 18 ^   ESC [ 31 ^
4224#  F8               ESC [ 19 ~   ESC [ 32 ~   ESC [ 19 ^   ESC [ 32 ^
4225#  F9               ESC [ 20 ~   ESC [ 33 ~   ESC [ 20 ^   ESC [ 33 ^
4226#  F10              ESC [ 21 ~   ESC [ 34 ~   ESC [ 21 ^   ESC [ 34 ^
4227#  F11              ESC [ 23 ~   ESC [ 23 $   ESC [ 23 ^   ESC [ 23 @
4228#  F12              ESC [ 24 ~   ESC [ 24 $   ESC [ 24 ^   ESC [ 24 @
4229#  F13              ESC [ 25 ~   ESC [ 25 $   ESC [ 25 ^   ESC [ 25 @
4230#  F14              ESC [ 26 ~   ESC [ 26 $   ESC [ 26 ^   ESC [ 26 @
4231#  F15 (Help)       ESC [ 28 ~   ESC [ 28 $   ESC [ 28 ^   ESC [ 28 @
4232#  F16 (Menu)       ESC [ 29 ~   ESC [ 29 $   ESC [ 29 ^   ESC [ 29 @
4233#  F17              ESC [ 31 ~   ESC [ 31 $   ESC [ 31 ^   ESC [ 31 @
4234#  F18              ESC [ 32 ~   ESC [ 32 $   ESC [ 32 ^   ESC [ 32 @
4235#  F19              ESC [ 33 ~   ESC [ 33 $   ESC [ 33 ^   ESC [ 33 @
4236#  F20              ESC [ 34 ~   ESC [ 34 $   ESC [ 34 ^   ESC [ 34 @
4237#
4238#                                                          Application
4239#  Up               ESC [ A      ESC [ a      ESC O a      ESC O A
4240#  Down             ESC [ B      ESC [ b      ESC O b      ESC O B
4241#  Right            ESC [ C      ESC [ c      ESC O c      ESC O C
4242#  Left             ESC [ D      ESC [ d      ESC O d      ESC O D
4243#  KP_Enter         ^M                                     ESC O M
4244#  KP_F1            ESC O P                                ESC O P
4245#  KP_F2            ESC O Q                                ESC O Q
4246#  KP_F3            ESC O R                                ESC O R
4247#  KP_F4            ESC O S                                ESC O S
4248#  XK_KP_Multiply   *                                      ESC O j
4249#  XK_KP_Add        +                                      ESC O k
4250#  XK_KP_Separator  ,                                      ESC O l
4251#  XK_KP_Subtract   -                                      ESC O m
4252#  XK_KP_Decimal    .                                      ESC O n
4253#  XK_KP_Divide     /                                      ESC O o
4254#  XK_KP_0          0                                      ESC O p
4255#  XK_KP_1          1                                      ESC O q
4256#  XK_KP_2          2                                      ESC O r
4257#  XK_KP_3          3                                      ESC O s
4258#  XK_KP_4          4                                      ESC O t
4259#  XK_KP_5          5                                      ESC O u
4260#  XK_KP_6          6                                      ESC O v
4261#  XK_KP_7          7                                      ESC O w
4262#  XK_KP_8          8                                      ESC O x
4263#  XK_KP_9          9                                      ESC O y
4264#
4265# The source-code for rxvt actually defines mappings for F21-F35, using
4266# "ESC [ 35 ~" to "ESC [  49 ~".  Keyboards with more than 12 function keys
4267# are rare, so this entry uses the shift- and control-modifiers as in
4268# xterm+pcfkeys to define keys past F12.
4269#
4270# kIC is normally not used, since rxvt performs a paste for that (shifted
4271# insert), unless private mode 35 is set.
4272#
4273# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
4274# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
4275rxvt+pcfkeys|fragment for PC-style fkeys,
4276	kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
4277	kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
4278	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
4279	kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4280	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4281	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4282	kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
4283	kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
4284	kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
4285	kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
4286	kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
4287	kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
4288	kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
4289	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4290	kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
4291	kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
4292	kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
4293	kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
4294	kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
4295	kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
4296
4297rxvt|rxvt terminal emulator (X Window System),
4298	ncv@,
4299	hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
4300	vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
4301rxvt-color|rxvt terminal emulator (X Window System),
4302	use=rxvt,
4303rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
4304	use=xterm+256color, use=rxvt,
4305rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
4306	use=xterm+88color, use=rxvt,
4307rxvt-xpm|rxvt terminal emulator (X Window System),
4308	use=rxvt,
4309rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
4310	acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4311	use=rxvt,
4312rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
4313	acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
4314	use=rxvt-cygwin,
4315
4316# This variant is supposed to work with rxvt 2.7.7 when compiled with
4317# NO_BRIGHTCOLOR defined.  rxvt needs more work...
4318rxvt-16color|xterm with 16 colors like aixterm,
4319	ncv#32, use=ibm+16color, use=rxvt,
4320
4321#### MRXVT
4322# mrxvt 0.5.4
4323#
4324# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
4325# makes its function-keys different from other flavors of rxvt -TD
4326mrxvt|multitabbed rxvt,
4327	XT,
4328	kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
4329	kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
4330	kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
4331	kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
4332	kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
4333	kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
4334	use=rxvt,
4335
4336mrxvt-256color|multitabbed rxvt with 256 colors,
4337	use=xterm+256color, use=mrxvt,
4338
4339#### ETERM
4340# From: Michael Jennings <mej@valinux.com>
4341#
4342# Eterm 0.9.3
4343#
4344# removed kf0 which conflicts with kf10 -TD
4345# remove cvvis which conflicts with cnorm -TD
4346# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
4347# but does otherwise follow the rxvt+pcfkeys model -TD
4348# remove nonworking flash -TD
4349# remove km as per tack test -TD
4350Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
4351	am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
4352	btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
4353	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4354	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4355	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4356	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4357	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4358	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4359	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4360	ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
4361	home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4362	ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4363	is1=\E[?47l\E>\E[?1l,
4364	is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
4365	kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
4366	kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
4367	mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4368	rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
4369	rmso=\E[27m, rmul=\E[24m,
4370	rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4371	rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4372	sc=\E7,
4373	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4374	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4375	smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4376	vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
4377	use=ecma+color,
4378
4379Eterm-256color|Eterm with xterm 256-colors,
4380	use=xterm+256color, use=Eterm,
4381
4382Eterm-88color|Eterm with 88 colors,
4383	use=xterm+88color, use=Eterm,
4384
4385#### ATERM
4386# Based on rxvt 2.4.8, it has a few differences in key bindings
4387aterm|AfterStep terminal,
4388	XT,
4389	kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
4390
4391#### XITERM
4392# xiterm  0.5-5.2
4393# This is not based on xterm's source...
4394# vttest shows several problems with keyboard, cursor-movements.
4395# see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
4396xiterm|internationalized terminal emulator for X,
4397	km@,
4398	kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
4399
4400
4401#### HPTERM
4402# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
4403# from BSD termcap.  (hpterm:  added empty <acsc>, we have no idea what ACS
4404# chars look like --esr)
4405hpterm|X-hpterm|hp X11 terminal emulator,
4406	am, da, db, mir, xhp,
4407	cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
4408	acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
4409	cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
4410	cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
4411	hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
4412	kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4413	kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
4414	kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
4415	khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
4416	knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
4417	memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
4418	pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
4419	pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
4420	pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
4421	rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
4422	rmul=\E&d@,
4423	sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
4424	sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
4425	smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4426# HPUX 11 provides a color version.
4427hpterm-color|HP X11 terminal emulator with color,
4428	ccc,
4429	colors#64, pairs#8,
4430	home=\E&a0y0C,
4431	initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
4432	op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
4433
4434#### EMU
4435# This is for the extensible terminal emulator on the X11R6 contrib tape.
4436# It corresponds to emu's internal emulation:
4437#	emu -term emu
4438# emu's default sets TERM to "xterm", but that doesn't work well -TD
4439# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
4440# fixes: add civis, cnorm, sgr -TD
4441emu|emu native mode,
4442	am, bce, mir, msgr, xon,
4443	colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
4444	acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
4445	bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
4446	cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
4447	cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
4448	cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
4449	dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
4450	ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
4451	hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
4452	is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
4453	kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
4454	kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
4455	kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
4456	kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
4457	kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
4458	kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
4459	op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
4460	rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
4461	setaf=\Er%i%p1%d;,
4462	sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
4463	sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
4464
4465# vt220 Terminfo entry for the Emu emulation, corresponds to
4466#	emu -term vt220
4467# with NumLock set (to make the keypad transmit kf0-kf9).
4468# fixes: add am, xenl, corrected sgr0 -TD
4469emu-220|Emu-220 (vt200-7bit mode),
4470	am, xenl, xon,
4471	cols#80, it#8, lines#24, vt#200,
4472	acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
4473	blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
4474	clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
4475	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
4476	cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
4477	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
4478	dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
4479	ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
4480	hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
4481	il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
4482	kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4483	kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
4484	kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
4485	kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
4486	kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
4487	kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
4488	kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
4489	kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
4490	knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
4491	ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
4492	rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
4493	sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4494	sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
4495	smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
4496
4497#### MVTERM
4498# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
4499# print interface, ANSI X3.64 colour escape sequences, etc.  Newsgroup postings
4500# indicate that it emulates more than one terminal, but incompletely.
4501#
4502# This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
4503# It is based on vt102's entry, with some subtle differences, but also
4504#	has status line
4505#	supports ANSI colors (except for 'op' string)
4506#	apparently implements alternate screen like xterm
4507#	does not use padding, of course.
4508mvterm|vv100|SwitchTerm aka mvTERM,
4509	am, eslok, hs, km, mir, msgr, xenl,
4510	colors#8, cols#80, it#8, lines#24, pairs#64,
4511	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4512	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4513	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4514	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4515	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4516	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4517	dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
4518	fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4519	ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
4520	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
4521	kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
4522	op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4523	rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
4524	rmul=\E[m,
4525	rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
4526	sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4527	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4528	sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
4529	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4530	tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
4531
4532#### MTERM
4533#
4534# This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
4535#
4536# "mterm -type ansi" sets $TERM to "ansi"
4537mterm-ansi|ANSI emulation,
4538	am, bw, mir, msgr,
4539	it#8,
4540	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4541	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4542	cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
4543	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4544	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4545	dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
4546	el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
4547	il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
4548	invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
4549	ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
4550	rmul=\E[24m,
4551	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4552	sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4553	vpa=\E[%i%p1%dd,
4554# mterm normally sets $TERM to "mterm"
4555mterm|mouse-sun|Der Mouse term,
4556	am, bw, mir,
4557	it#8,
4558	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
4559	cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
4560	home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
4561	rmir=^O, rmso=^T, smir=^Q, smso=^V,
4562# "mterm -type decansi" sets $TERM to "decansi"
4563#
4564# note: kdch1, kfnd, kslt are in the source code, but do not work -TD
4565decansi|ANSI emulation with DEC compatibility hacks,
4566	am, mir, msgr, xenl,
4567	colors#8, it#8, pairs#64,
4568	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4569	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4570	clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
4571	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4572	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4573	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4574	dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
4575	dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
4576	home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
4577	il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
4578	is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
4579	kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
4580	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4581	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4582	kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4583	kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4584	kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4585	kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
4586	ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
4587	rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
4588	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4589	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4590	sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
4591	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
4592	u7=\E[6n, vpa=\E[%i%p1%dd,
4593
4594#### VWM
4595#
4596# vwmterm is a terminal emulator written for the VWM console window manager
4597#
4598vwmterm|(vwm term),
4599	am, bce, ccc, mir, msgr, npc, xenl, xon,
4600	colors#8, pairs#64,
4601	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4602	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4603	clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD,
4604	cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
4605	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
4606	cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
4607	home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D,
4608	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
4609	kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
4610	kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
4611	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4612	khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
4613	rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
4614	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4615	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
4616	sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
4617	smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
4618
4619#### MGR
4620#
4621# MGR is a Bell Labs window system lighter-weight than X.
4622# These entries describe MGR's xterm-equivalent.
4623# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
4624#
4625
4626mgr|Bellcore MGR (non X) window system terminal emulation,
4627	am, km,
4628	bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
4629	csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
4630	cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
4631	dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
4632	dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
4633	ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
4634	il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
4635	kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
4636	rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
4637	smul=\E4n,
4638mgr-sun|Mgr window with Sun keyboard,
4639	ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
4640	kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
4641	kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
4642	kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
4643	kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
4644	kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
4645	kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
4646mgr-linux|Mgr window with Linux keyboard,
4647	ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
4648	kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
4649	kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
4650	kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4651	khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
4652
4653#### SIMPLETERM
4654# st.suckless.org
4655# st-0.1.1
4656#
4657# Note:  the original terminfo description uses leading blank to persuade
4658# ncurses to use "st" as its name.  Proper fix for that is to use "st" as an
4659# alias.
4660#
4661# Reading the code shows it should work for aixterm 16-colors
4662# - added st-16color
4663#
4664# Using tack:
4665# - set eo (erase-overstrike)
4666# - set xenl
4667# - tbc doesn't work
4668# - hts works
4669# - cbt doesn't work
4670# - shifted cursor-keys send sequences like rxvt
4671# - sgr referred to unimplemented "invis" mode.
4672# Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
4673simpleterm|st| simpleterm,
4674	am, eo, mir, msgr, ul, xenl,
4675	colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
4676	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4677	bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
4678	cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
4679	cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4680	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4681	dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
4682	hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
4683	il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177, kcub1=\E[D,
4684	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
4685	kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
4686	kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
4687	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4688	khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
4689	rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
4690	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4691	sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
4692	sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
4693st-16color|simpleterm with 16-colors,
4694	use=ibm+16color, use=simpleterm,
4695# 256 colors "works", but when running xterm's test-scripts, some garbage is
4696# shown in the titlebar.
4697st-256color|simpleterm with 256 colors,
4698	ccc@,
4699	initc@, use=simpleterm, use=xterm+256color,
4700
4701### TERMINATOR
4702# http://software.jessies.org/terminator/
4703# Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
4704# Debian/current -TD (2011/8/20)
4705#
4706# There are some packaging problems:
4707# a) using Java, the program starts off using 50Mb, and climbs from there,
4708#    up to 114Mb after testing (no scrollback).
4709# b) it insists on reinstalling its terminal description in $HOME/.terminfo
4710#    (two copies, just in case the host happens to be Mac OS X).
4711#    I deleted this after testing with tack.
4712#
4713# Issues/features found with tack:
4714# a) tbc does not work (implying that hts also is broken).
4715#    Comparing with the tabs utility shows a problem with the last tabstop on
4716#    a line.
4717# b) has xterm-style shifted function-key strings
4718#    meta also is used, but control is ignored.
4719# c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
4720# d) some combinations of shift/control send xterm-style sequences for
4721#    insert/delete/home/end.
4722# e) numeric keypad sends only numbers (compare with vttest).
4723# f) meta mode (km) is not implemented.
4724#
4725# Issues found with ncurses test-program:
4726# a) bce is inconsistently implemented
4727# b) widths of Unicode values above 256 do not always agree with wcwidth.
4728#
4729# Checked with vttest, found low degree of compatibility there.
4730#
4731# Checked with xterm's scripts, found that the 256-color palette is fixed.
4732#
4733# Fixes:
4734# a) add sgr string
4735# b) corrected sgr0 to reset alternate character set
4736# c) modified smacs/rmacs to use SCS rather than SI/SO
4737# d) removed bce
4738# e) removed km
4739terminator|Terminator no line wrap,
4740	eo, mir, msgr, xenl, xon,
4741	colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
4742	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4743	bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
4744	cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
4745	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
4746	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4747	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4748	dl=\E[%p1%dM, dl1=\E[M, dsl=\E]2;\007, ed=\E[J, el=\E[K,
4749	el1=\E[1K, enacs=\E(B\E)0, flash=^G, fsl=^G, home=\E[H,
4750	hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
4751	ind=^J, is1=\E[?47l\E=\E[?1l,
4752	is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
4753	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4754	kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4755	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
4756	kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4757	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4758	khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4759	op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
4760	rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
4761	rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4762	rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
4763	s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
4764	setaf=\E[38;5;%p1%dm,
4765	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%;m%?%p9%t\E(0%e\E(B%;,
4766	sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
4767	smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1,
4768	vpa=\E[%i%p1%dd,
4769
4770######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
4771#
4772
4773# Columbus UNIX virtual terminal. This terminal also appears in
4774# UNIX 4.0 and successors as line discipline 1 (?), but is
4775# undocumented and does not really work quite right.
4776cbunix|cb unix virtual terminal,
4777	OTbs, am, da, db,
4778	cols#80, lines#24, lm#0,
4779	bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
4780	cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
4781	el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
4782	kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
4783	smso=\Ea^D, smul=\Ea^A,
4784# (vremote: removed obsolete ":nl@:" -- esr)
4785vremote|virtual remote terminal,
4786	am@,
4787	cols#79, use=cbunix,
4788
4789pty|4bsd pseudo teletype,
4790	cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
4791	smso=\Ea$, smul=\Ea!, use=cbunix,
4792
4793# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
4794eterm|gnu emacs term.el terminal emulation,
4795	am, mir, xenl,
4796	cols#80, lines#24,
4797	bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4798	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4799	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4800	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4801	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4802	el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4803	il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
4804	rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
4805	sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
4806	smul=\E[4m,
4807
4808# The codes supported by the term.el terminal emulation in GNU Emacs 22.2
4809eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
4810	am, mir, msgr, xenl,
4811	colors#8, cols#80, lines#24, pairs#64,
4812	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4813	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4814	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4815	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4816	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4817	el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4818	il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
4819	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4820	kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
4821	knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
4822	ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
4823	sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
4824	sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
4825	sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4826	u6=\E[%i%d;%dR, u7=\E[6n,
4827
4828# Entries for use by the `screen' program by Juergen Weigert,
4829# Michael Schroeder, Oliver Laumann.  The screen and
4830# screen-w entries came with version 3.7.1.  The screen2 and screen3 entries
4831# come from University of Wisconsin and may be older.
4832# (screen: added <cnorm> on ANSI model -- esr)
4833#
4834# 'screen' defines extensions to termcap.  Some are used in its terminal
4835# description:
4836#      G0   (bool)  Terminal can deal with ISO 2022  font  selection sequences.
4837#      AX   (bool)  Does  understand ANSI set default fg/bg color
4838#                   (\E[39m / \E[49m).
4839#      S0   (str)   Switch charset 'G0' to the specified charset.
4840#      E0   (str)   Switch charset 'G0' back to standard charset.
4841#
4842# tested with screen 3.09.08
4843screen|VT 100/ANSI X3.64 virtual terminal,
4844	OTbs, OTpt, am, km, mir, msgr, xenl, G0,
4845	colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
4846	acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4847	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4848	clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
4849	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4850	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4851	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4852	cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4853	dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4854	flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4855	il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
4856	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4857	kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4858	kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4859	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4860	khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4861	nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4862	rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
4863	rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
4864	sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4865	sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
4866	smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
4867	S0=\E(%p1%c, use=ecma+color,
4868# The bce and status-line entries are from screen 3.9.13 (and require some
4869# changes to .screenrc).
4870screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
4871	bce,
4872	ech@, use=screen,
4873screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
4874	dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
4875
4876# ======================================================================
4877# Entries for GNU Screen with 16 colors.
4878# Those variations permit to benefit from 16 colors palette, and from
4879# bold font and blink attribute separated from bright colors. But they
4880# are less portable than the generic "screen" 8 color entries: Their
4881# usage makes real sense only if the terminals you attach and reattach
4882# do all support 16 color palette.
4883
4884screen-16color|GNU Screen with 16 colors,
4885	use=ibm+16color, use=screen,
4886
4887screen-16color-s|GNU Screen with 16 colors and status line,
4888	use=ibm+16color, use=screen-s,
4889
4890screen-16color-bce|GNU Screen with 16 colors and BCE,
4891	use=ibm+16color, use=screen-bce,
4892
4893screen-16color-bce-s|GNU Screen with 16 colors BCE and status line,
4894	bce, use=ibm+16color, use=screen-s,
4895
4896# ======================================================================
4897# Entries for GNU Screen 4.02 with --enable-colors256.
4898
4899screen-256color|GNU Screen with 256 colors,
4900	ccc@,
4901	initc@, use=xterm+256color, use=screen,
4902
4903screen-256color-s|GNU Screen with 256 colors and status line,
4904	ccc@,
4905	initc@, use=xterm+256color, use=screen-s,
4906
4907screen-256color-bce|GNU Screen with 256 colors and BCE,
4908	ccc@,
4909	initc@, use=xterm+256color, use=screen-bce,
4910
4911screen-256color-bce-s|GNU Screen with 256 colors BCE and status line,
4912	bce, ccc@,
4913	initc@, use=xterm+256color, use=screen-s,
4914
4915# ======================================================================
4916
4917# Read the fine manpage:
4918#       When  screen  tries  to  figure  out  a  terminal name for
4919#       itself, it first looks for an entry named "screen.<term>",
4920#       where  <term>  is the contents of your $TERM variable.  If
4921#       no such entry exists, screen tries "screen" (or "screen-w"
4922#       if the terminal is wide (132 cols or more)).  If even this
4923#       entry cannot be found, "vt100" is used as a substitute.
4924#
4925# Notwithstanding the manpage, screen uses its own notion of the termcap
4926# and some keys from "screen.<term>" are ignored.  Here is an entry which
4927# covers those (tested with screen 4.00.02) -TD
4928screen+fkeys|function-keys according to screen,
4929	kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
4930	khome=\E[1~, kslt@,
4931#
4932# Here are a few customized entries which are useful -TD
4933#
4934# Notes:
4935# (a)	screen does not support invis.
4936# (b)	screen's implementation of bw is incorrect according to tack.
4937# (c)	screen appears to hardcode the strings for khome/kend, making it
4938#	necessary to override the "use=" clause's values (screen+fkeys).
4939# (d)	screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
4940#	which is NOT the same as the terminfo screen.<term>.
4941# (e)	when screen finds one of these customized entries, it sets $TERM to
4942#	match.  Hence, no "screen.xterm" entry is provided, since that would
4943#	create heartburn for people running remote xterm's.
4944#
4945#	xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
4946#	since the default translations override the built-in keycode
4947#	translation.  They are suppressed here to show what is tested by tack.
4948screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
4949	bce@, bw,
4950	invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
4951	sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
4952	use=screen+fkeys, use=xterm-new,
4953# xterm-r6 does not really support khome/kend unless it is propped up by
4954# the translations resource.
4955screen.xterm-r6|screen customized for X11R6 xterm,
4956	bw, use=screen+fkeys, use=xterm-r6,
4957# Color applications running in screen and TeraTerm do not play well together
4958# on Solaris because Sun's curses implementation gets confused.
4959screen.teraterm|disable ncv in teraterm,
4960	ncv#127,
4961	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4962	use=screen+fkeys, use=screen,
4963# Other terminals
4964screen.rxvt|screen in rxvt,
4965	bw, XT,
4966	cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4967	kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
4968	use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
4969screen.Eterm|screen in Eterm,
4970	use=screen+fkeys, use=Eterm,
4971screen.mrxvt|screen in mrxvt,
4972	use=screen+fkeys, use=mrxvt,
4973screen.vte|screen in any VTE-based terminal,
4974	use=screen+fkeys, use=vte,
4975screen.gnome|screen in GNOME Terminal,
4976	use=screen+fkeys, use=gnome,
4977screen.konsole|screen in KDE console window,
4978	use=screen+fkeys, use=konsole,
4979# fix the backspace key
4980screen.linux|screen in linux console,
4981	bw,
4982	kbs=\177, kcbt@, use=screen+fkeys, use=screen,
4983screen.mlterm|screen in mlterm,
4984	use=screen+fkeys, use=mlterm,
4985
4986# The default "screen" entry is reasonably portable, but not optimal for the
4987# most widely-used terminal emulators.  The "bce" capability is supported in
4988# screen since 3.9.13, and when used, will require fewer characters to be sent
4989# to the terminal for updates.
4990#
4991# If you are using only terminals which support bce, then you can use this
4992# feature in your screen configuration.
4993#
4994# Adding these lines to your ".screenrc" file will allow using these customized
4995# entries:
4996#	term screen-bce
4997#	bce on
4998#	defbce on
4999screen-bce.xterm-new|screen optimized for modern xterm,
5000	bce,
5001	ech@, use=screen.xterm-new,
5002screen-bce.rxvt|screen optimized for rxvt,
5003	bce,
5004	ech@, use=screen.rxvt,
5005screen-bce.Eterm|screen optimized for Eterm,
5006	bce,
5007	ech@, use=screen.Eterm,
5008screen-bce.mrxvt|screen optimized for mrxvt,
5009	bce,
5010	ech@, use=screen.mrxvt,
5011screen-bce.gnome|screen optimized for GNOME-Terminal,
5012	bce,
5013	ech@, use=screen.gnome,
5014screen-bce.konsole|screen optimized for KDE console window,
5015	bce,
5016	ech@, use=screen.konsole,
5017screen-bce.linux|screen optimized for linux console,
5018	bce,
5019	ech@, use=screen.linux,
5020screen-bce.mlterm|screen optimized for mlterm,
5021	bce,
5022	ech@, use=screen.mlterm,
5023
5024screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
5025	cols#132, use=screen,
5026
5027screen2|old VT 100/ANSI X3.64 virtual terminal,
5028	cols#80, it#8, lines#24,
5029	cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
5030	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5031	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5032	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5033	el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
5034	il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5035	kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
5036	kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
5037	nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
5038	rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
5039	smso=\E[3m, smul=\E[4m, tbc=\E[3g,
5040# (screen3: removed unknown ":xv:LP:G0:" -- esr)
5041screen3|older VT 100/ANSI X3.64 virtual terminal,
5042	km, mir, msgr,
5043	cols#80, it#8, lines#24,
5044	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5045	cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5046	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5047	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
5048	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5049	el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5050	il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
5051	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
5052	kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
5053	rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
5054	sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
5055	smul=\E[4m, tbc=\E[3g,
5056
5057# Francesco Potorti <F.Potorti@cnuce.cnr.it>:
5058# NCSA telnet is one of the most used telnet clients for the Macintosh.  It has
5059# been maintained until recently by the National Center for Supercomputer
5060# Applications, and it is feature rich, stable and free.  It can be downloaded
5061# from www.ncsa.edu.  This terminfo description file is based on xterm-vt220,
5062# xterm+sl, and the docs at NCSA.  It works well.
5063#
5064# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
5065# The terminal options should be set as follows:
5066#         Xterm sequences ON
5067#         use VT wrap mode ON
5068#         use Emacs arrow keys OFF
5069#         CTRL-COMND is Emacs meta ON
5070#         8 bit mode ON
5071#         answerback string: "ncsa-vt220-8"
5072#         setup keys: all disabled
5073#
5074# Application mode is not used.
5075#
5076# Other special mappings:
5077#	Apple		VT220
5078#	HELP 		Find
5079#	HOME		Insert here
5080#	PAGEUP		Remove
5081#	DEL		Select
5082#	END		Prev Screen
5083#	PAGEDOWN	Next Screen
5084#
5085# Though it supports ANSI color, NCSA Telnet uses color to represent blinking
5086# text.
5087#
5088# The status-line manipulation is a mapping of the xterm-compatible control
5089# sequences for setting the window-title.  So you must use tsl and fsl in
5090# pairs, since the latter ends the string that is loaded to the window-title.
5091ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
5092	am, hs, km, mir, msgr, xenl,
5093	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5094	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5095	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5096	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5097	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5098	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5099	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5100	dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
5101	flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH,
5102	ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
5103	il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
5104	is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
5105	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5106	kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
5107	kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
5108	kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
5109	kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
5110	khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
5111	rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
5112	rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
5113	rmso=\E[27m, rmul=\E[24m,
5114	rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
5115	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
5116	sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
5117	smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;,
5118	u8=\E[?62;1;6c, use=ansi+enq,
5119ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
5120	use=ncsa-m, use=klone+color,
5121ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
5122	hs@,
5123	dsl@, fsl@, tsl@, use=ncsa,
5124ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
5125	hs@,
5126	dsl@, fsl@, tsl@, use=ncsa-m,
5127# alternate -TD:
5128# The documented function-key mapping refers to the Apple Extended Keyboard
5129# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6).  We use the VT220-style
5130# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
5131# some keyboards and many applications require these as F1-F4.
5132#
5133ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
5134	kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5135	kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
5136	kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
5137	kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
5138	kf8=\E[19~, kf9=\E[20~, use=ncsa,
5139
5140#### Pilot Pro Palm-Top
5141#
5142# Termcap for Top Gun Telnet and SSH on the Palm Pilot.
5143# http://www.ai/~iang/TGssh/
5144pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
5145	OTbs, am, xenl,
5146	cols#39, lines#16,
5147	bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
5148	cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
5149	ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
5150	rmso=\EB, smso=\Eb,
5151
5152# From: Federico Bianchi <bianchi@www.arte.unipi.it>
5153# These entries are for the Embeddable Linux Kernel System (ELKS)
5154# project - an heavily stripped down Linux to be run on 16 bit
5155# boxes or, eventually, to be used in embedded systems - and have been
5156# adapted from the stock ELKS termcap. The project itself looks stalled,
5157# and the latest improvements I know of date back to March 2000.
5158#
5159# To cope with the ELKS dumb console I added an "elks-glasstty" entry;
5160# as an added bonus, this deals with all the capabilities common to
5161# both VT52 and ANSI (or, eventually, "special") modes.
5162
5163elks-glasstty|ELKS glass-TTY capabilities,
5164	OTbs, am,
5165	cols#80, it#8, lines#25,
5166	bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
5167	nel=^M^J,
5168
5169elks-vt52|ELKS vt52 console,
5170	clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
5171	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
5172	home=\EH, use=elks-glasstty,
5173
5174elks-ansi|ELKS ANSI console,
5175	clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5176	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5177	rmso=\E[m, smso=\E[7m, use=elks-glasstty,
5178
5179# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
5180# instead of VT52, but the "elks" entry still refers to the latter.
5181
5182elks|default ELKS console,
5183	use=elks-vt52,
5184
5185# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
5186# one but in screen size
5187
5188sibo|ELKS SIBO console,
5189	cols#61, it#8, lines#20, use=elks-vt52,
5190
5191######## COMMERCIAL WORKSTATION CONSOLES
5192#
5193
5194#### Alpha consoles
5195#
5196
5197# This is from the OSF/1 Release 1.0 termcap file
5198pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
5199	am, xon,
5200	cols#80, lines#25,
5201	bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5202	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
5203	el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
5204	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
5205	nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
5206
5207#### Sun consoles
5208#
5209
5210# :is1: resets scrolling region in case a previous user had used "tset vt100"
5211oldsun|Sun Microsystems Workstation console,
5212	OTbs, am, km, mir, msgr,
5213	cols#80, it#8, lines#34,
5214	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
5215	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
5216	dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
5217	ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5218	is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5219	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
5220	rmso=\E[m, sgr0=\E[m, smso=\E[7m,
5221# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
5222# <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
5223# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
5224sun-il|Sun Microsystems console with working insert-line,
5225	am, km, msgr,
5226	cols#80, lines#34,
5227	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5228	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
5229	dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
5230	ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5231	kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5232	kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
5233	kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
5234	kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
5235	kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
5236	kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
5237	kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
5238	rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
5239	smso=\E[7m, u8=\E[1t, u9=\E[11t,
5240# On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
5241# flake out on the last line.  Unfortunately, without them the terminal has no
5242# way to scroll.
5243sun-cgsix|sun-ss5|Sun SparcStation 5 console,
5244	il@, il1@, use=sun-il,
5245# If you are using an SS5, change the sun definition to use sun-ss5.
5246sun|sun1|sun2|Sun Microsystems Inc. workstation console,
5247	use=sun-il,
5248
5249# From: <john@ucbrenoir>  Tue Sep 24 13:14:44 1985
5250sun-s|Sun Microsystems Workstation window with status line,
5251	hs,
5252	dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
5253sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
5254	hs,
5255	dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
5256sun-48|Sun 48-line window,
5257	cols#80, lines#48, use=sun,
5258sun-34|Sun 34-line window,
5259	cols#80, lines#34, use=sun,
5260sun-24|Sun 24-line window,
5261	cols#80, lines#24, use=sun,
5262sun-17|Sun 17-line window,
5263	cols#80, lines#17, use=sun,
5264sun-12|Sun 12-line window,
5265	cols#80, lines#12, use=sun,
5266sun-1|Sun 1-line window for sysline,
5267	eslok, hs,
5268	cols#80, lines#1,
5269	dsl=^L, fsl=\E[K, tsl=^M, use=sun,
5270sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
5271	ich1@, rmir@, smir@, use=sun,
5272sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
5273	lines#35,
5274	rmcup=\E[>4h, smcup=\E[>4l, use=sun,
5275sun-type4|Sun Workstation console with type 4 keyboard,
5276	kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
5277	kcuu1=\E[215z, use=sun-il,
5278
5279# Most of the current references to sun-color are from users wondering why this
5280# is the default on install.  Details from reading the wscons manpage, adding
5281# cub, etc., here (rather than in the base sun-il entry) since it is not clear
5282# when those were added -TD (2005-05-28)
5283#
5284# According to wscons manpage, color is supported only on IA systems.
5285# Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
5286# does not list these.  It also sets ncv#3, however that corresponds to
5287# underline and standout.
5288#
5289# Since the documentation and terminfo do not agree, see also current code at
5290# http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
5291#
5292# That (actually a different driver which "supports" sun-color) also supports
5293# these features:
5294#	vpa=\E[%i%p1%dd
5295#	hpa=\E[%i%p1%d`
5296#	cbt=\E[Z
5297#	dim=\E[2m
5298#	blink=\E[5m
5299# It supports bold, but not underline -TD (2009-09-19)
5300sun-color|Sun Microsystems Workstation console with color support (IA systems),
5301	colors#8, ncv#3, pairs#64,
5302	cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
5303	cuu=\E[%p1%dA, home=\E[H, op=\E[0m, setab=\E[4%p1%dm,
5304	setaf=\E[3%p1%dm,
5305	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5306	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5307	smso=\E[1m, use=sun,
5308
5309#### Iris consoles
5310#
5311
5312# (wsiris: this had extension capabilities
5313#	:HS=\E7F2:HE=\E7F7:\
5314#	:CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
5315# See the note on Iris extensions near the end of this file.
5316# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
5317# <flash> from BRL -- esr)
5318wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
5319	OTbs, OTnc, OTpt, am,
5320	OTkn#3, cols#80, it#8, lines#40,
5321	OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
5322	cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
5323	cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
5324	flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
5325	ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
5326	kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
5327	kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
5328	rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
5329	smul=\E7R2\E9P,
5330
5331#### NeWS consoles
5332#
5333# Console terminal windows under the NeWS (Sun's Display Postscript windowing
5334# environment).   Note: these have nothing to do with Sony's News workstation
5335# line.
5336#
5337
5338# Entry for NeWS's psterm from Eric Messick & Hugh Daniel
5339# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
5340psterm|psterm-basic|NeWS psterm-80x34,
5341	OTbs, am, hs, km, ul,
5342	cols#80, it#8, lines#34,
5343	blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
5344	cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
5345	dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
5346	home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
5347	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
5348	ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
5349	sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
5350	tsl=\EOl,
5351psterm-96x48|NeWS psterm 96x48,
5352	cols#96, lines#48, use=psterm,
5353psterm-90x28|NeWS psterm 90x28,
5354	cols#90, lines#28, use=psterm,
5355psterm-80x24|NeWS psterm 80x24,
5356	cols#80, lines#24, use=psterm,
5357# This is a faster termcap for psterm.  Warning:  if you use this termcap,
5358# some control characters you type will do strange things to the screen.
5359# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
5360psterm-fast|NeWS psterm fast version (flaky ctrl chars),
5361	OTbs, am, hs, km, ul,
5362	cols#80, it#8, lines#34,
5363	blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
5364	cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
5365	dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
5366	il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5367	kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
5368	rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
5369	smso=^Oo, smul=^Ou, tsl=^Ol,
5370
5371#### NeXT consoles
5372#
5373# Use `glasstty' for the Workspace application
5374#
5375
5376# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
5377next|NeXT console,
5378	am, xt,
5379	cols#80, it#8, lines#24,
5380	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5381	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5382	ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
5383	rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
5384nextshell|NeXT Shell application,
5385	am,
5386	cols#80,
5387	bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
5388	kcud1=^J, nel=^M^J,
5389
5390#### Sony NEWS workstations
5391#
5392
5393# (news-unk: this had :KB=news: -- esr)
5394news-unk|SONY NEWS vt100 emulator common entry,
5395	OTbs, OTpt, am, xenl,
5396	cols#80,
5397	OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
5398	cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
5399	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
5400	ed=\E[J, el=\E[K, home=\E[H, ht=^I,
5401	if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
5402	is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
5403	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
5404	kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
5405	kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
5406	rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
5407	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
5408	sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5409#
5410# (news-29: this had :TY=ascii: --esr)
5411news-29,
5412	lines#29, use=news-unk,
5413# (news-29-euc: this had :TY=euc: --esr)
5414news-29-euc,
5415	use=news-29,
5416# (news-29-sjis: this had :TY=sjis: --esr)
5417news-29-sjis,
5418	use=news-29,
5419#
5420# (news-33: this had :TY=ascii: --esr)
5421news-33,
5422	lines#33, use=news-unk,
5423# (news-33-euc: this had :TY=euc: --esr)
5424news-33-euc,
5425	use=news-33,
5426# (news-33-sjis: this had :TY=sjis: --esr)
5427news-33-sjis,
5428	use=news-33,
5429#
5430# (news-42: this had :TY=ascii: --esr)
5431news-42,
5432	lines#42, use=news-unk,
5433# (news-42-euc: this had :TY=euc: --esr)
5434news-42-euc,
5435	use=news-42,
5436# (news-42-sjis: this had :TY=sjis: --esr)
5437news-42-sjis,
5438	use=news-42,
5439#
5440#	NEWS-OS old termcap entry
5441#
5442# (news-old-unk: this had :KB=news:TY=sjis: --esr)
5443news-old-unk|SONY NEWS vt100 emulator common entry,
5444	OTbs, OTpt, am, xenl,
5445	cols#80, vt#3,
5446	OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
5447	cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
5448	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
5449	home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
5450	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
5451	kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
5452	rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
5453	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5454	sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5455#
5456# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
5457nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
5458	OTbs,
5459	lines#40,
5460	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
5461	use=news-old-unk,
5462#
5463# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
5464nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
5465	lines#42,
5466	is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
5467	use=news-old-unk,
5468#
5469# (nwp-512-o: this had :KB=nwp410:DE=^H:  I interpret the latter as <OTbs>. --esr)
5470nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
5471	OTbs,
5472	lines#40,
5473	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
5474	use=news-old-unk,
5475#
5476# (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
5477nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
5478	OTbs,
5479	lines#31,
5480	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
5481	use=news-old-unk,
5482#
5483# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
5484# also the alias vt100-bm.
5485nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
5486	OTbs,
5487	lines#33,
5488	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
5489	use=news-old-unk,
5490#
5491# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
5492nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
5493	OTbs,
5494	lines#31,
5495	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
5496	use=news-old-unk,
5497#
5498# (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
5499news28|sony vt100 emulator 28 lines,
5500	OTbs,
5501	lines#28,
5502	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
5503	use=news-old-unk,
5504#
5505# (news29: this had :TY=ascii:KB=nws1200:\ --esr)
5506news29|news28-a|sony vt100 emulator 29 lines,
5507	lines#29,
5508	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
5509	use=news-old-unk,
5510#
5511# (news511: this had :TY=sjis: --esr)
5512nwp511|nwp-511|nwp-511 vt100,
5513	OTbs, OTpt, am, xenl,
5514	cols#80, lines#24,
5515	clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5516	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
5517	ed=\E[J$<30/>, el=\E[K$<3/>,
5518	flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
5519	il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
5520	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
5521	kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
5522	ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
5523	rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
5524	smso=\E[7m$<2/>, smul=\E[4m$<2/>,
5525# (news517: this had :TY=sjis:. --esr)
5526nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
5527	eslok, hs,
5528	cols#80, lines#30,
5529	OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
5530	is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
5531	tsl=\E[1$}\E[;%df, use=vt200,
5532# (news517-w: this had :TY=sjis:. --esr)
5533nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
5534	eslok, hs,
5535	cols#132, lines#50,
5536	OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
5537	is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5538	rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5539	tsl=\E[1$}\E[;%df, use=vt200,
5540
5541#### Common Desktop Environment
5542#
5543
5544# This ships with Sun's CDE in Solaris 2.5
5545# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
5546dtterm|CDE desktop terminal,
5547	am, mir, msgr, xenl, xon,
5548	cols#80, it#8, lines#24, lm#0, ncv@,
5549	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5550	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5551	clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
5552	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5553	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5554	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5555	dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5556	dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5557	enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
5558	ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
5559	ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
5560	kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5561	kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5562	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5563	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5564	kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
5565	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5566	kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
5567	kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5568	rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
5569	sc=\E7,
5570	sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5571	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
5572	smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
5573
5574#### Non-Unix Consoles
5575#
5576
5577#### EMX termcap.dat compatibility modes
5578#
5579# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
5580# no_color_video to inform the application that standout(1), underline(2)
5581# reverse(4) and invisible(64) don't work with color.
5582emx-base|DOS special keys,
5583	bce, bw,
5584	it#8, ncv#71,
5585	bel=^G, use=ansi.sys,
5586
5587# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
5588# a Unix-style environment used on OS/2.  (Note that the suffix makes some
5589# names longer than 14 characters, the nominal maximum).
5590#
5591# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
5592ansi-emx|ANSI.SYS color,
5593	am, bce, eo, mir, msgr, xon,
5594	colors#8, cols#80, it#8, lines#25, pairs#64,
5595	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5596	clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
5597	cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5598	dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
5599	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
5600	kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
5601	rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
5602	rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
5603	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5604	sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
5605	smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
5606	u9=\E[c, use=emx-base,
5607# nice colors for Emacs (white on blue, mode line white on cyan)
5608ansi-color-2-emx|ANSI.SYS color 2,
5609	clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
5610	rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
5611	setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
5612	smul=\E[1;36;44m, use=ansi-emx,
5613# nice colors for Emacs (white on black, mode line black on cyan)
5614ansi-color-3-emx|ANSI.SYS color 3,
5615	clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
5616	rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
5617	setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
5618	smul=\E[0;36;40m, use=ansi-emx,
5619mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
5620	am,
5621	cols#80, it#8, lines#24,
5622	clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5623	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5624	ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
5625	kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
5626	kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
5627	kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
5628	sgr0=\E[0m,
5629
5630# Use this for cygwin32 (tested with beta 19.1)
5631# underline is colored bright magenta
5632# shifted kf1-kf12 are kf11-kf22
5633cygwinB19|ansi emulation for cygwin32,
5634	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5635	kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5636	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5637	kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5638	kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5639	kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5640	khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
5641	use=ansi.sys,
5642
5643# Use this for cygwin (tested with version 1.1.0).
5644# I've combined pcansi and linux.  Some values of course were different and
5645# I've indicated which of these were and which I used.
5646# Cheers, earnie_boyd@yahoo.com
5647# several changes based on running with tack and comparing with older entry -TD
5648# more changes from csw:
5649#   add    cbt   [backtab]
5650#   remove eo    [erase overstrike with blank]
5651#   change clear was \E[H\E[J  now \E[2J  (faster?)
5652#   remove cols
5653#   remove lines
5654#   remove ncv#3 [colors collide with highlights, bitmask] not applicable
5655#                to MSDOS box?
5656#   add    cub   [cursor back param]
5657#   add    cuf   [cursor forward param]
5658#   add    cuu   [cursor up param]
5659#   add    cud   [cursor down param]
5660#   add    hs    [has status line]
5661#   add    fsl   [return from status line]
5662#   add    tsl   [go to status line]
5663#   add    smacs [Start alt charset] (not sure if this works)
5664#   add    rmacs [End alt charset]   (ditto)
5665#   add    smcup [enter_ca_mode] (save console; thanks Corinna)
5666#   add    rmcup [exit_ca_mode]  (restore console; thanks Corinna)
5667#   add    kb2   [center of keypad]
5668#   add    u8    [user string 8] \E[?6c
5669#   add    el    [clear to end of line] \E[K
5670# Notes:
5671#   cnorm [make cursor normal] not implemented
5672#   flash [flash] not implemented
5673#   blink [blink] not implemented very usefully in cygwin? \E[5m
5674#   dim   [dim] not implemented very usefully in cygwin? \E[2m
5675#   cub1  [cursor back 1] typically \E[D, but ^H is faster?
5676#   kNXT  [shifted next key] not implemented
5677#   kPRV  [shifted prev key] not implemented
5678#   khome [home key] really is \E[1~ NOT \E[H
5679#   tbc   [clear tab stops] not implemented
5680#   xenl  [newline ignnored after 80 cols] messes up last line? Ehud Karni
5681#   smpch [Start PC charset] is \E[11m, same as smacs
5682#   rmpch [End PC charset] is \E[10m, same as rmacs
5683#   mir   [move in insert mode] fails in tack?
5684#   bce   [back color erase] causes problems with change background color?
5685#   cvvis [make cursor very visible] causes a stackdump when testing with
5686#         testcurs using the output option? \E[?25h\E[?8c
5687#   civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
5688#   ech   [erase characters param] broken \E[%p1%dX
5689#   kcbt  [back-tab key] not implemented in cygwin?  \E[Z
5690#
5691# 2005/11/12 -TD
5692#	Remove cbt since it does not work in current cygwin
5693#	Add 'mir' and 'in' flags based on tack
5694cygwin|ansi emulation for Cygwin,
5695	am, hs, mir, msgr, xon,
5696	colors#8, it#8, pairs#64,
5697	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5698	bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
5699	cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5700	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5701	cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5702	dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
5703	hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
5704	il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
5705	kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5706	kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5707	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5708	kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5709	kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5710	kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5711	khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
5712	nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
5713	rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
5714	rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
5715	sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5716	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5717	sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
5718	smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
5719	vpa=\E[%i%p1%dd, use=vt102+enq,
5720
5721# I've supplied this so that you can help test new values and add other
5722# features.  Cheers, earnie_boyd@yahoo.com.
5723#
5724# Some features are from pcansi.  The op value is from linux.  Function-keys
5725# are from linux.  These have been tested not to cause problems.  xenl was in
5726# this list, but DOES cause problems so it has been removed
5727cygwinDBG|Debug Version for Cygwin,
5728	am, eo, mir, msgr, xon,
5729	colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5730	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5731	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5732	cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
5733	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5734	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5735	dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5736	dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5737	flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
5738	ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5739	il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
5740	kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
5741	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
5742	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5743	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5744	kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
5745	kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5746	kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5747	knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
5748	rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
5749	rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5750	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5751	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
5752	sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
5753	smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
5754
5755# Key definitions:
5756# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc.  match the
5757# encodings used by other x86 environments.  All others are invented for DJGPP.
5758# Oddly enough, while several combinations of modifiers are tabulated, there is
5759# none for shifted cursor keys.
5760#
5761#	F1			\E[[A
5762#	F2			\E[[B
5763#	F3			\E[[C
5764#	F4			\E[[D
5765#	F5			\E[[E
5766#	F6			\E[17~
5767#	F7			\E[18~
5768#	F8			\E[19~
5769#	F9			\E[20~
5770#	F10			\E[21~
5771#	F11			\E[23~
5772#	F12			\E[24~
5773#
5774#	Delete			\E[3~
5775#	Down Arrow		\E[B
5776#	End			\E[4~
5777#	Home			\E[1~
5778#	Insert			\E[2~
5779#	Left Arrow		\E[D
5780#	Page Down		\E[6~
5781#	Page Up			\E[5~
5782#	Right Arrow		\E[C
5783#	Up Arrow		\E[A
5784#
5785#	Shift-F1		\E[25~
5786#	Shift-F2		\E[26~
5787#	Shift-F3		\E[27~
5788#	Shift-F4		\E[28~
5789#	Shift-F5		\E[29~
5790#	Shift-F6		\E[30~
5791#	Shift-F7		\E[31~
5792#	Shift-F8		\E[32~
5793#	Shift-F9		\E[33~
5794#	Shift-F10		\E[34~
5795#	Shift-F11		\E[35~
5796#	Shift-F12		\E[36~
5797#
5798#	Ctrl-F1			\E[47~
5799#	Ctrl-F2			\E[48~
5800#	Ctrl-F3			\E[49~
5801#	Ctrl-F4			\E[50~
5802#	Ctrl-F5			\E[51~
5803#	Ctrl-F6			\E[52~
5804#	Ctrl-F7			\E[53~
5805#	Ctrl-F8			\E[54~
5806#	Ctrl-F9			\E[55~
5807#	Ctrl-F10		\E[56~
5808#	Ctrl-F11		\E[57~
5809#	Ctrl-F12		\E[58~
5810#
5811#	Ctrl-Delete		\E[43~
5812#	Ctrl-Down Arrow		\E[38~
5813#	Ctrl-End		\E[44~
5814#	Ctrl-Home		\E[41~
5815#	Ctrl-Insert		\E[42~
5816#	Ctrl-Left Arrow		\E[39~
5817#	Ctrl-Page Down		\E[46~
5818#	Ctrl-Page Up		\E[45~
5819#	Ctrl-Right Arrow	\E[40~
5820#	Ctrl-Up Arrow		\E[37~
5821#
5822#	Alt-F1			\E[59~
5823#	Alt-F2			\E[60~
5824#	Alt-F3			\E[61~
5825#	Alt-F4			\E[62~
5826#	Alt-F5			\E[63~
5827#	Alt-F6			\E[64~
5828#	Alt-F7			\E[65~
5829#	Alt-F8			\E[66~
5830#	Alt-F9			\E[67~
5831#	Alt-F10			\E[68~
5832#	Alt-F11			\E[79~
5833#	Alt-F12			\E[80~
5834#
5835#	Alt-Delete		\E[65~
5836#	Alt-Down Arrow		\E[60~
5837#	Alt-End			\E[66~
5838#	Alt-Home		\E[41~
5839#	Alt-Insert		\E[64~
5840#	Alt-Left Arrow		\E[61~
5841#	Alt-Page Down		\E[68~
5842#	Alt-Page Up		\E[67~
5843#	Alt-Right Arrow		\E[62~
5844#	Alt-Up Arrow		\E[59~
5845#
5846# Also:
5847#	Alt-A			\E[82~
5848#	Alt-B			\E[82~
5849#	Alt-C			\E[83~
5850#	Alt-D			\E[84~
5851#	Alt-E			\E[85~
5852#	Alt-F			\E[86~
5853#	Alt-G			\E[87~
5854#	Alt-H			\E[88~
5855#	Alt-I			\E[89~
5856#	Alt-J			\E[90~
5857#	Alt-K			\E[91~
5858#	Alt-L			\E[92~
5859#	Alt-M			\E[93~
5860#	Alt-N			\E[94~
5861#	Alt-O			\E[95~
5862#	Alt-P			\E[96~
5863#	Alt-Q			\E[97~
5864#	Alt-R			\E[98~
5865#	Alt-S			\E[99~
5866#	Alt-T			\E[100~
5867#	Alt-U			\E[101~
5868#	Alt-V			\E[102~
5869#	Alt-W			\E[103~
5870#	Alt-X			\E[104~
5871#	Alt-Y			\E[105~
5872#	Alt-Z			\E[106~
5873djgpp|ansi emulation for DJGPP alpha,
5874	am, bce, msgr, xhp, xon, xt,
5875	colors#8, it#8, pairs#64,
5876	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5877	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5878	clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
5879	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5880	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5881	cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5882	dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5883	home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
5884	ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
5885	indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
5886	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
5887	kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
5888	kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
5889	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5890	khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
5891	op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
5892	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5893	sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
5894	sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
5895
5896djgpp203|Entry for DJGPP 2.03,
5897	OTbs, am,
5898	cols#80, it#8, lines#25,
5899	bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
5900	kcud1=^J, nel=^M^J,
5901
5902djgpp204|Entry for DJGPP 2.04,
5903	OTbs, am, AX,
5904	colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
5905	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5906	clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
5907	cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5908	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5909	cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
5910	dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
5911	home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5912	il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
5913	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5914	kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
5915	kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5916	kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5917	kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
5918	ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
5919	setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
5920
5921# This is tested using U/Win's telnet.  Scrolling is omitted because it is
5922# buggy.  Another odd bug appears when displaying "~" in alternate character
5923# set (the emulator spits out error messages).  Compare with att6386 -TD
5924uwin|U/Win 3.2 console,
5925	am, eo, in, msgr, xenl, xon,
5926	colors#8, it#8, ncv#58, pairs#64,
5927	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5928	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5929	clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
5930	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5931	dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
5932	ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
5933	ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
5934	kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
5935	kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
5936	kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
5937	khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
5938	rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
5939	rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5940	setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
5941	smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
5942	smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
5943
5944# This entry fits the Windows NT console when the _POSIX_TERM environment
5945# variable is set to 'on'.  While the Windows NT POSIX console is seldom used,
5946# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
5947# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
5948# systems is not, and (surprise!) they match very well.
5949#
5950# See:  MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
5951# VI POSIX Editor for Windows NT 3.1".  True to Microsoft form, not only
5952# are the installation instructions a pile of mind-numbing bureaucratese,
5953# but the termcap entry is actually broken and unusable as given; the :do:
5954# capability is misspelled "d".
5955#
5956# To use this, you need to a bunch of environment variables:
5957#
5958# SET _POSIX_TERM=on
5959# SET TERM=ansi
5960# SET TERMCAP=location of termcap file in POSIX file format
5961# which is case-sensitive.
5962# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
5963# SET TMP=//C/TEMP
5964#
5965# Important note: setting the TMP environment variable in POSIX style renders
5966# it incompatible with a lot of other applications, including Visual C++. So
5967# you should have a separate command window just for vi. All the other
5968# variables may be permanently set in the Control Panel\System applet.
5969#
5970# You can find out more about the restrictions of this facility at
5971# <http://www.nentug.org/unix-to-nt/ntposix.htm>.
5972#
5973# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
5974ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
5975	am, bw, msgr,
5976	cols#80, it#8, lines#25,
5977	bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5978	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
5979	home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
5980	kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
5981	ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
5982# From: jew@venus.sunquest.com
5983# Date: 19 Feb 93 23:41:07 GMT
5984# Here's  a  combination of  ansi and  vt100 termcap
5985# entries   that  works  nearly   perfectly  for  me
5986# (Gateway 2000 Handbook and Microsoft Works 3.0):
5987pcmw|PC running Microsoft Works,
5988	am, xenl,
5989	cols#80, it#8, lines#24, vt#3,
5990	bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
5991	clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
5992	cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
5993	cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
5994	ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
5995	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5996	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
5997	rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
5998	ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
5999	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6000	sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
6001	tbc=\E[3g$<2/>,
6002
6003# From: Federico Bianchi
6004# This is the entry for the OpenNT terminal.
6005# The ntconsole name is for backward compatability.
6006# This is for OpenNT 2.0 and later.
6007# Later OpenNT was renamed to Interix.
6008#
6009# Presently it is distributed by Microsoft as Services For Unix (SFU).
6010# The 3.5 beta contains ncurses 4.2 (that is header files and executables,
6011# the documentation dates from 1.9.9e) -TD
6012
6013interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
6014	am, bw, msgr,
6015	colors#8, cols#80, lines#25, ncv#3, pairs#64,
6016	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6017	bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
6018	cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
6019	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6020	cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
6021	home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
6022	indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
6023	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
6024	kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
6025	kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
6026	kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
6027	kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
6028	kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
6029	kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
6030	kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
6031	kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
6032	kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
6033	kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
6034	kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
6035	kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
6036	kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
6037	kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
6038	op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
6039	rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
6040	sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6041	setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
6042	sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
6043
6044opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
6045	lines#35, use=opennt,
6046
6047opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
6048	lines#50, use=opennt,
6049
6050opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
6051	lines#60, use=opennt,
6052
6053opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
6054	lines#100, use=opennt,
6055
6056# OpenNT wide terminals
6057opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
6058	cols#125, use=opennt,
6059
6060opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
6061	lines#35, use=opennt-w,
6062
6063opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
6064	lines#50, use=opennt-w,
6065
6066opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
6067	lines#60, use=opennt-w,
6068
6069opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
6070	cols#132, use=opennt,
6071
6072# OpenNT terminals with no smcup/rmcup (names match termcap entries)
6073interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
6074	rmcup@, smcup@, use=opennt,
6075
6076opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
6077	lines#35, use=opennt-nti,
6078
6079opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
6080	lines#50, use=opennt-nti,
6081
6082opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
6083	lines#60, use=opennt-nti,
6084
6085opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
6086	lines#100, use=opennt-nti,
6087
6088######## COMMON TERMINAL TYPES
6089#
6090# This section describes terminal classes and maker brands that are still
6091# quite common, but have proprietary command sets not blessed by ANSI.
6092#
6093
6094#### Altos
6095#
6096# Altos made a moderately successful line of UNIX boxes.  In 1990 they were
6097# bought out by Acer, a major Taiwanese manufacturer of PC-clones.
6098# Acer has a web site at http://www.acer.com.
6099#
6100# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
6101# His comments suggest they were shipped with the system.
6102#
6103
6104# (altos2: had extension capabilities
6105#	:c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6106#	:c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6107#	:c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6108#	:cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6109#	:XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
6110#	:YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
6111#	:HL=^AP\r:SP=\E[i:\
6112#	:IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
6113#	:LO=\E[0q:LC=\E[5q:LL=\E[6q:\
6114# Comparison with the k* capabilities makes it obvious that the c* things are
6115# shift keys.  I have renamed them to keys 32 and up accordingly.  Also,
6116# :sr: was given as a boolean-- esr)
6117altos2|alt2|altos-2|altos II,
6118	cols#80, it#8, lines#24, xmc#0,
6119	clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
6120	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
6121	ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
6122	if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
6123	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
6124	kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
6125	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
6126	kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
6127	kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
6128	kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
6129	kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
6130	kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
6131	nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
6132	smam=\E[?7h, smso=\E[7m, smul=\E[4m,
6133# (altos3: had extension capabilities
6134#	:c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6135#	:c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6136#	:c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6137#	:cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6138#	:XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
6139#	:HL=^AP\r:SP=\E[i:\
6140#	:IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
6141altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
6142	blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
6143altos4|alt4|altos-4|altos IV,
6144	use=wy50,
6145# (altos7: had extension capabilities:
6146#	:GG#0:GI=\EH8:GF=\EH7:\
6147#	:c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6148#	:c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6149#	:c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6150#	:cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6151# Comparison with the k* capabilities makes it obvious that the c* things are
6152# shift keys.  I have renamed them to keys 32 and up accordingly.  I have
6153# also made this entry relative to adm12 in order to give it an <sgr>. The
6154# <invis> imported by use=adm+sgr may work, let me know. -- esr)
6155altos7|alt7|altos VII,
6156	am, mir,
6157	cols#80, lines#24, xmc#0,
6158	acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
6159	clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6160	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6161	dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
6162	ind=^J, invis=\EG1,
6163	is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
6164	kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
6165	kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
6166	kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
6167	kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
6168	kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
6169	kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
6170	kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
6171	knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
6172	rmir=\Er, smir=\Eq, use=adm+sgr,
6173altos7pc|alt7pc|altos PC VII,
6174	kend=\ET, use=altos7,
6175
6176#### Hewlett-Packard (hp)
6177#
6178#	Hewlett-Packard
6179#	8000 Foothills Blvd
6180#	Roseville, CA 95747
6181#	Vox: 1-(916)-785-4363	(Technical response line for VDTs)
6182#	     1-(800)-633-3600	(General customer support)
6183#
6184#
6185# As of March 1998, HP no longer has any terminals in production.
6186# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
6187# supported (they still have parts). So are the 2392a and 2394a.
6188# See the WORKSTATION CONSOLES section for the 700s.
6189#
6190
6191# Generic HP terminal - this should (hopefully) work on any HP terminal.
6192hpgeneric|hp|hewlett-packard generic terminal,
6193	OTbs, OTpt, am, da, db, mir, xhp,
6194	cols#80, lines#24, lm#0, vt#6,
6195	bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6196	cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
6197	ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
6198	ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
6199	sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
6200	vpa=\E&a%p1%dY,
6201
6202hp110|hewlett-packard model 110 portable,
6203	lines#16, use=hpgeneric,
6204
6205hp+pfk+cr|hp function keys with CR,
6206	kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
6207	kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
6208
6209hp+pfk-cr|hp function keys w/o CR,
6210	kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
6211	kf8=\Ew,
6212
6213# The hp2621s use the same keys for the arrows and function keys,
6214# but not separate escape sequences. These definitions allow the
6215# user to use those keys as arrow keys rather than as function
6216# keys.
6217hp+pfk+arrows|hp alternate arrow definitions,
6218	kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
6219	kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
6220	kll=\Eq\r, kri=\Es\r,
6221
6222hp+arrows|hp arrow definitions,
6223	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6224	kind=\ES, kll=\EF, kri=\ET,
6225
6226# Generic stuff from the HP 262x series
6227#
6228hp262x|HP 262x terminals,
6229	xhp,
6230	blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
6231	invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6232	kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
6233	kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
6234	krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6235	sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
6236	sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
6237
6238# Note: no <home> on HPs since that homes to top of memory, not screen.
6239# Due to severe 2621 braindamage, the only way to get the arrow keys to
6240# transmit anything at all is to turn on the function key labels
6241# with <smkx>, and even then the user has to hold down shift!
6242# The default 2621 turns off the labels except when it has to to
6243# enable the function keys. If your installation prefers labels
6244# on all the time, or off all the time (at the "expense" of the
6245# function keys), use 2621-nl or 2621-wl.
6246#
6247# Note: there are newer ROMs for 2621's that allow you to set
6248# strap A so the regular arrow keys xmit \EA, etc, as with the
6249# 2645. However, even with this strap set, the terminal stops
6250# xmitting if you reset it, until you unset and reset the strap!
6251# Since there is no way to set/unset the strap with an escape
6252# sequence, we don't use it in the default.
6253# If you like, you can use 2621-ba (brain-damaged arrow keys).
6254hp2621-ba|2621 w/new rom and strap A set,
6255	rmkx@, smkx@, use=hp+arrows, use=hp2621,
6256
6257# hp2621 with function labels. Most of the time they are off,
6258# but inside vi, the function key labels appear. You have to
6259# hold down shift to get them to xmit.
6260hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
6261	is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
6262hp2621-fl|hp 2621,
6263	xhp@, xon,
6264	pb#19200,
6265	cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
6266	ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
6267	sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
6268	use=hp+pfk+cr, use=hpgeneric,
6269
6270# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
6271hp2621p|hp 2621 with printer,
6272	mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
6273
6274hp2621p-a|hp2621p with fn as arrows,
6275	use=hp+pfk+arrows, use=hp2621p,
6276
6277# hp2621 with k45 keyboard
6278hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
6279	kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
6280	khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
6281
6282# 2621 using all 48 lines of memory, only 24 visible at any time.
6283hp2621-48|48 line 2621,
6284	lines#48,
6285	cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
6286	use=hp2621,
6287
6288# 2621 with no labels ever. Also prevents vi delays on escape.
6289hp2621-nl|hp 2621 with no labels,
6290	kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
6291	use=hp2621-fl,
6292
6293# Needed for UCB ARPAVAX console, since lsi-11 expands tabs
6294# (wrong).
6295#
6296hp2621-nt|hp 2621 w/no tabs,
6297	ht@, use=hp2621,
6298
6299# Hp 2624 B with 4 or 10 pages of memory.
6300#
6301# Some assumptions are made with this entry. These settings are
6302# NOT set up by the initialization strings.
6303#
6304# Port Configuration
6305# 	RecvPace=Xon/Xoff
6306# 	XmitPace=Xon/Xoff
6307# 	StripNulDel=Yes
6308#
6309# Terminal Configuration
6310# 	InhHndShk=Yes
6311# 	InhDC2=Yes
6312# 	XmitFnctn(A)=No
6313# 	InhEolWrp=No
6314#
6315# Note: the 2624 DOES have a true <home>, believe it or not!
6316#
6317# The 2624 has an "error line" to which messages can be sent.
6318# This is CLOSE to what is expected for a "status line". However,
6319# after a message is sent to the "error line", the next carriage
6320# return is EATEN and the "error line" is turned back off again!
6321# So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
6322#
6323# This entry supports emacs (and any other program that uses raw
6324# mode) at 4800 baud and less. I couldn't get the padding right
6325# for 9600.
6326#
6327# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
6328hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
6329	da, db,
6330	lm#96,
6331	flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
6332	use=hp+labels, use=scrhp,
6333
6334# This hp2626 entry does not use any of the fancy windowing stuff
6335# of the 2626.
6336#
6337# Indeed, terminfo does not yet handle such stuff. Since changing
6338# any window clears memory, it is probably not possible to use
6339# this for screen opt.
6340#
6341# ed is incredibly slow most of the time - I am guessing at the
6342# exact padding. Since the terminal uses xoff/xon this is intended
6343# only for cost computation, so that the terminal will prefer el
6344# or even dl1 which is probably faster!
6345#
6346# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
6347# extra slow on the last line of the window.
6348#
6349# The padding probably should be changed.
6350#
6351hp2626|hp2626a|hp2626p|hp 2626,
6352	da, db,
6353	lm#0, pb#19200,
6354	ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
6355	is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr,
6356	use=hp+labels, use=scrhp,
6357
6358# This entry is for sysline. It allocates a 23 line window with
6359# a 115 line workspace for regular use, and a 1 line window for
6360# the status line.
6361#
6362# This assumes port 2 is being used.
6363# Turn off horizontal line, Create ws #1 with 115 lines,
6364# Create ws #2 with 1 line, Create window #1 lines 1-23,
6365# Create window #2 lines 24-24, Attach cursor to workspace #1.
6366# Note that this clears the tabs so it must be done by tset before
6367# it sets the tabs.
6368#
6369hp2626-s|hp 2626 using only 23 lines,
6370	eslok, hs,
6371	lines#23,
6372	fsl=\E&d@\E&w7f2p1I\E&w4f1I,
6373	is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
6374	tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
6375# Force terminal back to 24 lines after being 23.
6376hp2626-ns|hp 2626 using all 24 lines,
6377	is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
6378	use=hp2626,
6379# Various entries useful for small windows on 2626.
6380hp2626-12|hewlett-packard 2626 12 lines,
6381	lines#12, use=hp2626,
6382hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
6383	cols#40, lines#12, use=hp2626,
6384hp2626-x40|hewlett-packard 2626 40 columns,
6385	cols#40, use=hp2626,
6386hp2626-12-s|hewlett-packard 2626 11 lines plus status,
6387	lines#11, use=hp2626-s,
6388
6389#
6390# hp2627 color tubes from University of Wisconsin
6391#
6392hp2627a-rev|hp 2627 with reverse video colors,
6393	cr=^M, cud1=^J, ht=^I, ind=^J,
6394	is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
6395	kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
6396	smul=\E&dD\E&v1S, use=hp2621-nl,
6397hp2627a|hp 2627 color terminal with no labels,
6398	cr=^M, cud1=^J, ht=^I, ind=^J,
6399	is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
6400	kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
6401	rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
6402	use=hp2621-nl,
6403hp2627c|hp 2627 color (cyan) terminal with no labels,
6404	cr=^M, cud1=^J, ht=^I, ind=^J,
6405	is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
6406	kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
6407
6408# hp2640a doesn't have the Y cursor addressing feature, and C is
6409# memory relative instead of screen relative, as we need.
6410#
6411hp2640a|hp 2640a,
6412	cup@, rmkx@, smkx@, use=hp2645,
6413
6414hp2640b|hp2644a|hp 264x series,
6415	rmkx@, smkx@, use=hp2645,
6416
6417# (hp2641a: removed unknown :gu: -- esr)
6418hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
6419	am, da, db, mir, xhp,
6420	cols#80, lines#24,
6421	bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6422	cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
6423	ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
6424	if=/usr/share/tabset/std, il1=\EL, ind=^J,
6425	is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6426	rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
6427	vpa=\E&a%p1%2dY,
6428
6429# This terminal should be used at 4800 baud or less. It needs padding for
6430# plain characters at 9600, I guessed at an appropriate cr delay.  It really
6431# wants ^E/^F handshaking, but that doesn't work well even if you write
6432# software to support it.
6433hp2645|hp45|HP 2645 series,
6434	pb#9600,
6435	blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
6436	kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6437	ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
6438	kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
6439	rmkx=\E&s0A,
6440	sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
6441	sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
6442# You should use this terminal at 4800 baud or less.
6443hp2648|hp2648a|HP 2648a graphics terminal,
6444	clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
6445	dch1=\EP$<7>, ip=$<5>, use=hp2645,
6446
6447# The HP 150 terminal is a fairly vanilla HP terminal, with the
6448# clreol standout problem. It also has graphics capabilities and
6449# a touch screen, which we don't describe here.
6450hp150|hewlett packard Model 150,
6451	OTbs, use=hp2622,
6452
6453# HP 2382a terminals, "the little ones." They don't have any
6454# alternate character set support and sending out ^N/^O will
6455# leave the screen blank.
6456hp2382a|hp2382|hewlett packard 2382a,
6457	da, db,
6458	lh#1, lm#48,
6459	acsc@,
6460	pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
6461	rmacs@,
6462	sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
6463	sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
6464
6465hp2621-a|hp2621a-a|hp2621 with fn as arrows,
6466	use=hp+pfk+arrows, use=hp2621-fl,
6467
6468# newer hewlett packard terminals
6469
6470newhpkeyboard|generic entry for HP extended keyboard,
6471	kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6472	kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
6473	kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
6474	kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
6475	use=hp+pfk-cr,
6476
6477newhp|generic entry for new hewlett packard terminals,
6478	am, bw, mir, xhp, xon,
6479	cols#80, lines#24, pb#4800,
6480	acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
6481	bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
6482	cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
6483	dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
6484	invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
6485	pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
6486	pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
6487	pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
6488	rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
6489	sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
6490	sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
6491	tbc=\E3, use=newhpkeyboard,
6492
6493memhp|memory relative addressing for new HP ttys,
6494	vt#6,
6495	clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
6496	cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
6497	home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
6498	mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
6499
6500scrhp|screen relative addressing for new HP ttys,
6501	clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
6502	cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
6503	cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
6504	home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
6505	mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
6506
6507# (hp+labels: added label values from a BRL termcap -- esr)
6508hp+labels|"standard" label info for new HP ttys,
6509	lh#2, lw#8, nlab#8,
6510	lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
6511	pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
6512	rmln=\E&j@, smln=\E&jB,
6513
6514hp+printer|"standard" printer info for HP ttys,
6515	ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
6516
6517
6518# The new hp2621b is kind of a cross between the old 2621 and the
6519# new 262x series of machines. It has dip-switched options.
6520# The firmware has a bug in it such that if you give it a null
6521# length label, the following character is eaten!
6522hp2621b|hp 2621b with old style keyboard,
6523	lh#1, lm#48, lw#8, nlab#8,
6524	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6525	kind=\ET, kll=\EF, kri=\ES,
6526	pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
6527	smln=\E&jB, use=hp2621,
6528
6529hp2621b-p|hp 2621b with printer,
6530	use=hp+printer, use=hp2621b,
6531
6532# hp2621b - new 2621b with new extended keyboard
6533# these are closer to the new 26xx series than the other 2621b
6534hp2621b-kx|hp 2621b with extended keyboard,
6535	use=newhpkeyboard, use=hp2621b,
6536
6537hp2621b-kx-p|hp 2621b with new keyboard & printer,
6538	use=hp+printer, use=hp2621b-kx,
6539
6540# Some assumptions are made in the following entries.
6541# These settings are NOT set up by the initialization strings.
6542#
6543#    Port Configuration
6544# RecvPace=Xon/Xoff	XmitPace=Xon/Xoff	StripNulDel=Yes
6545#
6546#    Terminal Configuration
6547# InhHndShk(G)=Yes	InhDC2(H)=Yes
6548# XmitFnctn(A)=No		InhEolWrp=No
6549#
6550#
6551# Hp 2622a & hp2623a display and graphics terminals
6552#
6553hp2622|hp2622a|hp 2622,
6554	da, db,
6555	lm#0, pb#19200,
6556	is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
6557
6558# The 2623 is a 2622 with extra graphics hardware.
6559hp2623|hp2623a|hp 2623,
6560	use=hp2622,
6561
6562hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
6563	use=hp+printer, use=hp2624,
6564
6565# The hewlett packard B can have an optional extra 6 pages of memory.
6566hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
6567	lm#240, use=hp2624,
6568
6569hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
6570	lm#240, use=hp2624b-p,
6571
6572# Color manipulations for HP terminals
6573hp+color|hp with colors,
6574	ccc,
6575	colors#16, ncv#17, pairs#7,
6576	initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
6577	oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
6578	op=\E&v0S, scp=\E&v%p1%dS,
6579
6580# <is2> sets the screen to be 80 columns wide
6581hp2397a|hp2397|hewlett packard 2397A color terminal,
6582	is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
6583
6584#  HP 700/44 Setup parameters:
6585# Terminal Mode		HP-PCterm
6586# Inhibit Auto Wrap	NO
6587# Status Line		Host Writable
6588# PC Character Set	YES
6589# Twenty-Five Line Mode	YES
6590# XON/XOFF		@128 or 64 (sc)
6591# Keycode Mode 		NO   or YES (sc)
6592# Backspace Key		BS or BS/DEL
6593#
6594# <is2> 	sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
6595# \E\\? does not turn off keycode mode
6596# <smsc>	sets alternate start/stop; keycode on
6597hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
6598	am, eo, xenl, xon,
6599	cols#80, lines#25,
6600	acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
6601	bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
6602	cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6603	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6604	ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
6605	ind=^J,
6606	is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
6607	kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6608	kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
6609	kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
6610	kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
6611	kpp=\E[5~, rmam=\E[?7l,
6612	rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
6613	rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
6614	smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
6615	smul=\E[4m, xoffc=g, xonc=e,
6616#
6617# (hp2392: copied <rmir> here from hpex -- esr)
6618hp2392|239x series,
6619	cols#80,
6620	cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
6621	kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
6622	kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
6623	rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
6624	use=hpsub,
6625
6626hpsub|hp terminals -- capability subset,
6627	am, da, db, mir, xhp, xon,
6628	lines#24,
6629	bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6630	cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
6631	ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
6632	is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
6633	kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
6634	sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
6635
6636# hpex:
6637#	May be used for most 24 x 80 hp terminals,
6638# but has no padding added, so may allow runover in some terminals at high
6639# baud rates.  Will not work for hp2640a or hp2640b terminals, hp98x6 and
6640# hp98x5 terminal emulators or hp98x6 consoles.
6641# 	Adds xy-cursor addressing, vertical cursor addressing, home,
6642# last line, and underline capabilities.
6643#
6644# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
6645# moved <rmir> here from hpsub -- esr)
6646hpex|hp extended capabilites,
6647	cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
6648	kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
6649	smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
6650
6651# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
6652hp2|hpex2|hewlett-packard extended capabilities newer version,
6653	am, da, db, mir, xhp,
6654	cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
6655	bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6656	cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6657	dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6658	il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6659	kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6660	ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6661	kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6662	kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6663	krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
6664	pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6665	pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6666	pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6667	pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
6668	rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6669	sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6670	sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
6671	smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6672
6673# HP 236 console
6674# From: <ddavis@ic.berkeley.edu>
6675hp236|hp236 internal terminal emulator,
6676	OTbs, am,
6677	cols#80, lines#24,
6678	clear=\EF, cnorm=\EDE, cub1=^H,
6679	cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
6680	dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
6681	sgr0=\ECI, smso=\EBI,
6682
6683# This works on a hp300 console running Utah 4.3 BSD
6684# From: Craig Leres <leres@okeeffe.berkeley.edu>
6685hp300h|HP Catseye console,
6686	OTbs, am, da, db, mir, xhp,
6687	cols#128, lines#51, lm#0, xmc#0,
6688	bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6689	cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6690	dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6691	if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
6692	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6693	rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
6694	smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
6695	vpa=\E&a%p1%dY,
6696# From: Greg Couch <gregc@ernie.berkeley.edu>
6697hp9837|hp98720|hp98721|HP 9000/300 workstations,
6698	OTbs, am, da, db, mir, xhp,
6699	cols#128, it#8, lines#46, lm#0,
6700	bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
6701	cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6702	dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6703	il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
6704	kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6705	ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
6706	kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
6707	sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
6708	tbc=\E3, vpa=\E&a%p1%dY,
6709# HP 9845 desktop computer from BRL
6710# (hp9845: removed unknown capability :gu: -- esr)
6711hp9845|HP 9845,
6712	OTbs, am, da, db, eo, mir, xhp,
6713	cols#80, lines#21,
6714	OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
6715	cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
6716	ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
6717	rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
6718# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
6719# (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
6720# added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
6721hp98550|hp98550a|HP 9000 Series 300 color console,
6722	OTbs, am, da, db, mir, xhp,
6723	cols#128, it#8, lines#49, lm#0,
6724	acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
6725	clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6726	cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
6727	dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6728	if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
6729	kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6730	kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
6731	kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
6732	khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
6733	knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
6734	rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6735	sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
6736	smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6737# From: Victor Duchovni <vic@fine.princeton.edu>
6738# (hp700-wy: removed obsolete ":nl=^J:";
6739# replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
6740hp700-wy|HP700/41 emulating wyse30,
6741	OTbs, am, bw, mir, msgr,
6742	cols#80, it#8, lines#24, xmc#1,
6743	cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
6744	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6745	dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
6746	if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
6747	is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
6748	kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
6749	kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
6750	ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
6751	sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
6752	smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
6753hp70092|hp70092a|hp70092A|HP 700/92,
6754	am, da, db, xhp,
6755	cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
6756	acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
6757	bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
6758	cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
6759	dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6760	hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6761	kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6762	ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6763	kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6764	kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6765	krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
6766	rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6767	sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
6768	smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6769
6770bobcat|sbobcat|HP 9000 model 300 console,
6771	am, da, db, mir, xhp,
6772	cols#128, it#8, lines#47, xmc#0,
6773	cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6774	cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
6775	dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
6776	il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
6777	kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
6778	rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
6779	smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
6780gator-t|HP 9000 model 237 emulating extra-tall AAA,
6781	lines#94, use=gator,
6782gator|HP 9000 model 237 emulating AAA,
6783	bw, km, mir, ul,
6784	cols#128, it#8, lines#47,
6785	bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
6786	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
6787	dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
6788	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
6789	ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
6790	il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6791	rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
6792	rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6793gator-52|HP 9000 model 237 emulating VT52,
6794	cols#128, lines#47, use=vt52,
6795gator-52t|HP 9000 model 237 emulating extra-tall VT52,
6796	lines#94, use=gator-52,
6797
6798#### Honeywell-Bull
6799#
6800# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
6801#
6802
6803# Honeywell Bull terminal.  Its cursor and function keys send single
6804# control characters and it has standout/underline glitch.  Most programs
6805# do not like these features/bugs.  Visual bell is realized by flashing the
6806# "keyboard locked" LED.
6807dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
6808	cols#80, lines#25,
6809	clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
6810	cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
6811	flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
6812	kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
6813dku7003|Honeywell Bull DKU 7003 all features described,
6814	msgr,
6815	xmc#1,
6816	blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
6817	rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6818	use=dku7003-dumb,
6819
6820#### Lear-Siegler (adm)
6821#
6822# These guys are long since out of the terminals business, but
6823# in 1995 many current terminals still have an adm type as one of their
6824# emulations (usually their stupidest, and usually labeled adm3, though
6825# these `adm3' emulations normally have adm3a+ capabilities).
6826#
6827# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
6828# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
6829# was being held to ground would trigger a send of the top line on the screen.
6830# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
6831# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
6832# for clearing up this point.)
6833
6834adm1a|adm1|lsi adm1a,
6835	am,
6836	cols#80, lines#24,
6837	bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6838	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
6839	ind=^J,
6840adm2|lsi adm2,
6841	OTbs, am,
6842	cols#80, lines#24,
6843	bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6844	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6845	dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
6846	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
6847# (adm3: removed obsolete ":ma=^K^P:" -- esr)
6848adm3|lsi adm3,
6849	OTbs, am,
6850	cols#80, lines#24,
6851	bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
6852# The following ADM-3A switch settings are assumed for normal operation:
6853#	SPACE		U/L_DISP	CLR_SCRN	24_LINE
6854#	CUR_CTL		LC_EN		AUTO_NL		FDX
6855# Other switches may be set for operator convenience or communication
6856# requirements.  I recommend
6857#	DISABLE_KB_LOCK	LOCAL_OFF	103		202_OFF
6858#	ETX_OFF		EOT_OFF
6859# Most of these terminals required an option ROM to support lower case display.
6860# Open the case and look at the motherboard; if you see an open 24-pin DIP
6861# socket, you may be out of luck.
6862#
6863# (adm3a: some capabilities merged in from BRl entry -- esr)
6864adm3a|lsi adm3a,
6865	OTbs, am,
6866	cols#80, lines#24,
6867	OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
6868	cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6869	cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
6870	kcuu1=^K, rs2=^N,
6871adm3a+|adm3a plus,
6872	kbs=^H, use=adm3a,
6873# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
6874adm5|lsi adm5,
6875	xmc#1,
6876	bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
6877	rmso=\EG, smso=\EG, use=adm3a+,
6878# A lot of terminals other than adm11s use these.  Wherever you see
6879# use=adm+sgr with some of its capabilities disabled, try the
6880# disabled ones.  They may well work but not have been documented or
6881# expressed in the using entry.  We'd like to cook up an <sgr> but the
6882# <rmacs>/<smacs> sequences of the using entries vary too much.
6883adm+sgr|adm style highlight capabilities,
6884	invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
6885	smso=\EG4, smul=\EG8,
6886# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
6887# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
6888# <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>.  <clear> could also
6889# be ^Z, according to his entry.
6890# (adm11: <smul>=\EG4 was obviously erroneous because it also said
6891# <rev>=\EG4.  Looking at other ADMs confirms this -- esr)
6892adm11|LSI ADM-11,
6893	OTbs, am, hs,
6894	OTkn#8, cols#80, lines#24,
6895	OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
6896	cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6897	cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
6898	kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
6899	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6900	kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
6901	use=adm+sgr,
6902# From: Andrew Scott Beals <bandy@lll-crg.ARPA>
6903# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
6904# Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
6905# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :".  This formerly had
6906# <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
6907# via BRL.  That entry asserted <xmc#1>, but I've left that out because
6908# neither earlier nor later ADMSs have it -- esr)
6909#
6910# You will need to get into the supervisor setup before you can set
6911# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
6912# see a lot more setup options.
6913#
6914# While in supervisor setup you can also use following codes:
6915#
6916# Ctrl-P Personality character selections (configure for example what
6917#        arrow keys send, if I recall correctly)
6918# Ctrl-T tabs 1-80   use left&right to move and up to set and
6919# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
6920# Ctrl-B Binary setup (probably not needed. I think that everything can
6921#        be set using normal setup)
6922# Ctrl-A Answerback mode (enter answerback message)
6923# Ctrl-U User friendly mode (normal setup)
6924# Ctrl-D Defaults entire setup and function keys from EPROM tables
6925# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
6926# Ctrl-R Reads both setup and functions keys from NVM.
6927# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
6928#
6929# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
6930# RTS/CTS used nowadays with virtually every modem and computer. 19200
6931# bps works fine with hardware flow control.
6932#
6933# The following null-modem cable should fix this and enable you to use
6934# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
6935# set ADM-12+ for DTR handshaking from supervisor setup.
6936#
6937# PC Serial   ADM-12+
6938#  --------   -------
6939#         2 - 3
6940#         3 - 2
6941#         4 - 5
6942#         5 - 20
6943#       6,8 - 4
6944#         7 - 7
6945#        20 - 6,8
6946#
6947adm12|lsi adm12,
6948	OTbs, OTpt, am, mir,
6949	OTug#1, cols#80, it#8, lines#24,
6950	bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6951	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6952	dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
6953	is2=\E0        \E1        \E1        \E1        \E1        \E1        \E1        \E1        \E1,
6954	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
6955	kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
6956	kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
6957	use=adm+sgr,
6958# (adm20: removed obsolete ":kn#7:" -- esr)
6959adm20|lear siegler adm20,
6960	OTbs, am,
6961	cols#80, it#8, lines#24,
6962	bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
6963	cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
6964	dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
6965	kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
6966	sgr0=\E(, smso=\E),
6967adm21|lear siegler adm21,
6968	xmc#1,
6969	bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
6970	ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
6971	kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
6972	use=adm3a,
6973# (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
6974# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
6975# removed bogus-looking \200 from before <cup>. -- esr)
6976adm22|lsi adm22,
6977	OTbs, am,
6978	cols#80, lines#24,
6979	bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6980	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6981	dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
6982	is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
6983	kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
6984	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6985	kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
6986	lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
6987# ADM 31 DIP Switches
6988#
6989# This information comes from two versions of the manual for the
6990# Lear-Siegler ADM 31.
6991#
6992# Main board:
6993#                  rear of case
6994#   +-||||-------------------------------------+
6995#   + S1S2                              ||S    +
6996#   +                                   ||3    +
6997#   +                                          +
6998#   +                                ||S       +
6999#   +                                ||4       +
7000#   +                                          +
7001#   +                                          +
7002#   +                                          +
7003#   +                                          +
7004#   +                                          +
7005# +-+                                          +-+
7006# +                                              +
7007# +                               S5 S6 S7       +
7008# +                               == == ==       +
7009# +----------------------------------------------+
7010#            front of case (keyboard)
7011#
7012#  S1 - Data Rate - Modem
7013#  S2 - Data Rate - Printer
7014# ------------------------
7015# Data Rate   Setting
7016# -------------------
7017# 50          0 0 0 0
7018# 75          1 0 0 0
7019# 110         0 1 0 0
7020# 134.5       1 1 0 0
7021# 150         0 0 1 0
7022# 300         1 0 1 0
7023# 600         0 1 1 0
7024# 1200        1 1 1 0
7025# 1800        0 0 0 1
7026# 2000        1 0 0 1
7027# 2400        0 1 0 1
7028# 3600        1 1 0 1
7029# 4800        0 0 1 1
7030# 7200        1 0 1 1
7031# 9600        0 1 1 1
7032# x           1 1 1 1
7033#
7034# S3 - Interface/Printer/Attributes
7035# ---------------------------------
7036# Printer Busy Control
7037# sw1   sw2   sw3
7038# ---------------
7039# off   off   off   Busy not active, CD disabled
7040# off   off   on    Busy not active, CD enabled
7041# off   on    off   Busy active on J5-20, CD disabled
7042# on    off   off   Busy active on J5-19, CD disabled - Factory Set.
7043# on    off   on    Busy active on J5-19, CD enabled
7044#
7045# sw4   Used in conjuction with S4 for comm interface control - Fact 0
7046#
7047# sw5   Secondary Channel Control (Hardware implementation only) - Fact 0
7048#
7049# sw6   ON enables printer BUSY active LOW - Factory Setting
7050#       OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
7051#
7052# sw7   ON - steady cursor - Factory Setting
7053#       OFF - blinking cursor
7054#
7055# sw8   ON causes selected attribute character to be displayed
7056#       OFF causes SPACE to be displayed instead - Factory Setting
7057#
7058# S4 - Interface
7059# --------------
7060# Modem Interface
7061# S3    S4    S4    S4    S4
7062# sw4   sw1   sw2   sw3   sw4
7063# ---------------------------
7064# OFF   ON    OFF   ON    OFF   Enable RS-232C interface, Direct Connect and
7065#                               Current Loop disabled - Factory Setting
7066# ON    ON    OFF   ON    OFF   Enable Current Loop interface, Direct Connect
7067#                               disabled
7068# OFF   OFF   ON    OFF   ON    Enable Direct Connect interface, RS-232C and
7069#                               Current Loop Disabled
7070#
7071# sw5   ON disables dot stretching mode - Factory Setting
7072#       OFF enables dot stretching mode
7073# sw6   ON enables blanking function
7074#       OFF enables underline function - Factory Setting
7075# sw7   ON causes NULLS to be displayed as NULLS
7076#       OFF causes NULLS to be displayed as SPACES - Factory Setting
7077#
7078# S5 - Word Structure
7079# -------------------
7080# sw1   ON enables BREAK key - Factory Setting
7081#       OFF disables BREAK key
7082# sw2   ON selects 50Hz monitor refresh rate
7083#       OFF selects 60Hz monitor refresh rate - Factory Setting
7084#
7085# Modem Port Selection
7086# sw3   sw4   sw5
7087# ---------------
7088# ON    ON    ON    Selects 7 DATA bits, even parity, 2 STOP bits
7089# OFF   ON    ON    Selects 7 DATA bits, odd  parity, 2 STOP bits
7090# ON    OFF   ON    Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
7091# OFF   OFF   ON    Selects 7 DATA bits, odd  parity, 1 STOP bit
7092# ON    ON    OFF   Selects 8 DATA bits, no   parity, 2 STOP bits
7093# OFF   ON    OFF   Selects 8 DATA bits, no   parity, 1 STOP bit
7094# ON    OFF   OFF   Selects 8 DATA bits, even parity, 1 STOP bit
7095# OFF   OFF   OFF   Selects 8 DATA bits, odd  parity, 1 STOP bit
7096#
7097# sw6   ON  sends bit 8 a 1 (mark)
7098#       OFF sends bit 8 as 0 (space) - Factory Setting
7099# sw7   ON  selects Block Mode
7100#       OFF selects Conversation Mode - Factory Setting
7101# sw8   ON  selects Full Duplex operation
7102#       OFF selects Half Duplex operation - Factory Setting
7103#
7104# S6 - Printer
7105# ------------
7106# sw1, sw2, sw6, sw7   Reserved - Factory 0
7107#
7108# Printer Port Selection
7109# same as Modem above, bit 8 (when 8 DATA bits) is always = 0
7110#
7111# sw8   ON   enables Printer Port
7112#       OFF disables Printer Port - Factory Setting
7113#
7114# S7 - Polling Address
7115# --------------------
7116# sw1-7 Establish ASCII character which designates terminal polling address
7117#       ON  = logic 0
7118#       OFF = logic 1 - Factory Setting
7119# sw8   ON   enables Polling Option
7120#       OFF disables Polling Option - Factory Setting
7121#
7122#
7123# On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
7124#
7125# This adm31 entry uses underline as the standout mode.
7126# If the adm31 gives you trouble with standout mode, check the DIP switch in
7127# position 6, bank @c11, 25% from back end of the circuit board.  Should be
7128# OFF.  If there is no such switch, you have an old adm31 and must use oadm31.
7129# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
7130adm31|lsi adm31 with sw6 set for underline mode,
7131	OTbs, am, mir,
7132	cols#80, lines#24,
7133	bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7134	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7135	dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
7136	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
7137	kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
7138	kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
7139	rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
7140adm31-old|o31|old adm31,
7141	rmul@, smso=\EG4, smul@, use=adm31,
7142# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
7143adm36|LSI ADM36,
7144	OTbs, OTpt,
7145	OTkn#4,
7146	if=/usr/share/tabset/vt100,
7147	is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
7148	use=vt100,
7149# (adm42: removed obsolete ":ma=^K^P:" -- esr)
7150adm42|lsi adm42,
7151	OTbs, am,
7152	cols#80, lines#24,
7153	bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7154	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7155	cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
7156	il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
7157	kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
7158	smir=\Eq, smul@, use=adm+sgr,
7159# The following termcap for the Lear Siegler ADM-42 leaves the
7160# "system line" at the bottom of the screen blank (for those who
7161# find it distracting otherwise)
7162adm42-ns|lsi adm-42 with no system line,
7163	cbt=\EI\EF \011, clear=\E;\EF \011,
7164	cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
7165	dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
7166	el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
7167	smir=\Eq\EF \011, use=adm42,
7168# ADM 1178 terminal -- rather like an ADM-42.  Manual is dated March 1 1985.
7169# The insert mode of this terminal is commented out because it's broken for our
7170# purposes in that it will shift the position of every character on the page,
7171# not just the cursor line!
7172# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
7173adm1178|1178|lsi adm1178,
7174	am,
7175	cols#80, lines#24, xmc#1,
7176	bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
7177	cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7178	cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
7179	home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
7180	kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
7181	sgr0=\E), smso=\EG4, smul=\EG1,
7182
7183#### Prime
7184#
7185# Yes, Prime made terminals.  These entries were posted by Kevin J. Cummings
7186# <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
7187# Prime merged with ComputerVision in the late 1980s; you can reach them at:
7188#
7189#	ComputerVision Services
7190#	500 Old Connecticut Path
7191#	Framingham, Mass.
7192#
7193
7194# Standout mode is dim reverse-video.
7195pt100|pt200|wren|fenix|prime pt100/pt200,
7196	am, bw, mir, msgr,
7197	cols#80, it#8, lines#24,
7198	cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
7199	cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
7200	cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
7201	cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
7202	ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
7203	home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
7204	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
7205	rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
7206	sgr0=\E[m,
7207	smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
7208	smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
7209pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
7210	cols#132,
7211	cup=\E[%i%p1%d;%p2%dH, use=pt100,
7212pt250|Prime PT250,
7213	rmso@, smso@, use=pt100,
7214pt250w|Prime PT250 in 132-column mode,
7215	rmso@, smso@, use=pt100w,
7216
7217#### Qume (qvt)
7218#
7219#	Qume, Inc.
7220#	3475-A North 1st Street
7221#	San Jose CA 95134
7222#	Vox: (800)-457-4447
7223#	Fax: (408)-473-1510
7224#	Net: josed@techsupp.wyse.com (Jose D'Oliveira)
7225#
7226# Qume was bought by Wyse, but still (as of early 1995) has its own support
7227# group and production division.
7228#
7229# Discontinued Qume models:
7230#
7231# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
7232# built to replace them, and a qvt119+ which was a 101+ with available wide
7233# mode (132 columns).  There was a qvt103 which added vt100/vt131 emulations
7234# and an ANSI-compatible qvt203 that replaced it.  Qume started producing
7235# ANSI-compatible terminals with the qvt323 and qvt61.
7236#
7237# Current Qume models (as of February 1995):
7238#
7239# All current Qume terminals have ANSI-compatible operation modes.
7240# Qume is still producing the qvt62, which features emulations for other
7241# popular lines such as ADDS, and dual-host capabilities.  The qvt82 is
7242# designed for use as a SCO ANSI terminal.  The qvt70 is a color terminal
7243# with many emulations including Wyse370, Wyse 325, etc.  Their newest
7244# model is the qvt520, which is vt420-compatible.
7245#
7246# There are some ancient printing Qume terminals under `Daisy Wheel Printers'
7247#
7248# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
7249# setup mode.  Shift-s should be a configuration save to NVRAM.
7250
7251qvt101|qvt108|qume qvt 101 and QVT 108,
7252	xmc#1, use=qvt101+,
7253
7254# This used to have <cvvis=\E.2> but no <cnorm> or <civis>.  The BSD termcap
7255# file had <cvvis=\EM4 \200\200\200>.  I've done the safe thing and yanked
7256# both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
7257# What seems to be going on here is that this entry was designed so that
7258# the normal highlight is bold and standout is dim plus something else
7259# (reverse-video maybe?  But then, are there two <rev> sequences?)
7260qvt101+|qvt101p|qume qvt 101 PLUS product,
7261	am, bw, hs, ul,
7262	cols#80, lines#24, xmc#0,
7263	bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
7264	cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7265	dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
7266	flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
7267	ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
7268	kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
7269	kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
7270	kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
7271	khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
7272	smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
7273qvt102|qume qvt 102,
7274	cnorm=\E., use=qvt101,
7275# (qvt103: added <rmam>/<smam> based on init string -- esr)
7276qvt103|qume qvt 103,
7277	am, xenl, xon,
7278	cols#80, it#8, lines#24, vt#3,
7279	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
7280	clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
7281	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
7282	cuf=\E[%p1%dC, cuf1=\E[C$<2>,
7283	cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
7284	cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
7285	hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
7286	kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
7287	rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
7288	rmso=\E[m$<2>, rmul=\E[m$<2>,
7289	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
7290	sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
7291	sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
7292	smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
7293qvt103-w|qume qvt103 132 cols,
7294	cols#132, lines#24,
7295	rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
7296qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
7297	am, hs, mir, msgr,
7298	cols#80, lines#24, xmc#0,
7299	bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
7300	cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7301	cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
7302	el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
7303	hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
7304	kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
7305	kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
7306	kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7307	mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
7308	tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
7309qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
7310	lines#25, use=qvt119+,
7311qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
7312	cols#132,
7313	is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
7314qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
7315	lines#25, use=qvt119+,
7316qvt203|qvt203+|qume qvt 203 Plus,
7317	dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
7318	ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
7319	kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
7320	kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
7321qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
7322	cols#132, lines#24,
7323	rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
7324#
7325#	Since a command is present for enabling 25 data lines,
7326#	a specific terminfo entry may be generated for the 203.
7327#	If one is desired for the QVT 119 PLUS then 25 lines must
7328#	be selected in the status line (setup line 9).
7329#
7330qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
7331	cols#80, lines#25,
7332	is2=\E[=40h\E[?3l, use=qvt203,
7333qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
7334	cols#132, lines#25,
7335	rs2=\E[?3h\E[=40h, use=qvt203,
7336
7337#### Televideo (tvi)
7338#
7339#	TeleVideo
7340#	550 East Brokaw Road
7341#	PO Box 49048    95161
7342#	San Jose CA 95112
7343#	Vox: (408)-954-8333
7344#	Fax: (408)-954-0623
7345#
7346#
7347# These require incredible amounts of padding.
7348#
7349# All of these terminals (912 to 970 and the tvipt) are discontinued.  Newer
7350# Televideo terminals are ANSI and PC-ANSI compatible.
7351
7352tvi803|televideo 803,
7353	clear=\E*$<10>, use=tvi950,
7354
7355# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
7356# Switch settings are:
7357#
7358# S1  1 2 3 4
7359#     D D D D  9600
7360#     D D D U    50
7361#     D D U D    75
7362#     D D U U   110
7363#     D U D D   135
7364#     D U D U   150
7365#     D U U D   300
7366#     D U U U   600
7367#     U D D D  1200
7368#     U D D U  1800
7369#     U D U D  2400
7370#     U D U U  3600
7371#     U U D D  4800
7372#     U U D U  7200
7373#     U U U D  9600
7374#     U U U U 19200
7375#
7376# S1  5 6 7 8
7377#     U D X D  7N1 (data bits, parity, stop bits) (X means ignored)
7378#     U D X U  7N2
7379#     U U D D  7O1
7380#     U U D U  7O2
7381#     U U U D  7E1
7382#     U U U U  7E2
7383#     D D X D  8N1
7384#     D D X U  8N2
7385#     D U D D  8O1
7386#     D U U U  8E2
7387#
7388# S1  9  Autowrap
7389#     U  on
7390#     D  off
7391#
7392# S1 10  CR/LF
7393#     U  do CR/LF when CR received
7394#     D  do CR when CR received
7395#
7396# S2  1  Mode
7397#     U  block
7398#     D  conversational
7399#
7400# S2  2  Duplex
7401#     U  half
7402#     D  full
7403#
7404# S2  3  Hertz
7405#     U  50
7406#     D  60
7407#
7408# S2  4  Edit mode
7409#     U  local
7410#     D  duplex
7411#
7412# S2  5  Cursor type
7413#     U  underline
7414#     D  block
7415#
7416# S2  6  Cursor down key
7417#     U  send ^J
7418#     D  send ^V
7419#
7420# S2  7  Screen colour
7421#     U  green on black
7422#     D  black on green
7423#
7424# S2  8  DSR status (pin 6)
7425#     U  disconnected
7426#     D  connected
7427#
7428# S2  9  DCD status (pin 8)
7429#     U  disconnected
7430#     D  duplex
7431#
7432# S2 10  DTR status (pin 20)
7433#     U  disconnected
7434#     D  duplex
7435# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
7436# <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
7437tvi910|televideo model 910,
7438	OTbs, am, msgr,
7439	cols#80, it#8, lines#24, xmc#1,
7440	bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7441	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
7442	home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
7443	if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
7444	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
7445	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7446	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7447	vpa=\E[%p1%{32}%+%c, use=adm+sgr,
7448# From: Alan R. Rogers <rogers%albany@csnet-relay>
7449# as subsequently hacked over by someone at SCO
7450# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
7451#
7452# Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
7453#
7454# S1  1 2 3 4:
7455#     D D D D  9600     D D D U    50     D D U D    75     D D U U   110
7456#     D U D D   135     D U D U   150     D U U D   300     D U U U   600
7457#     U D D D  1200     U D D U  1800     U D U D  2400     U D U U  3600
7458#     U U D D  4800     U U D U  7200     U U U D  9600     U U U U 19200
7459#
7460# S1  5 6 7 8:
7461#     U D X D  7N1     U D X U  7N2     U U D D  7O1     U U D U  7O2
7462#     U U U D  7E1     U U U U  7E2     D D X D  8N1     D D X U  8N2
7463#     D U D D  8O1     D U U U  8E2
7464#
7465# S1  9  Autowrap            (U = on, D = off)
7466# S1 10  CR/LF               (U = CR/LF on CR received, D = CR on CR received)
7467# S2  1  Mode                (U = block, D = conversational)
7468# S2  2  Duplex              (U =  half, D = full)
7469# S2  3  Hertz               (U = 50, D = 60)
7470# S2  4  Edit mode           (U = local, D = duplex)
7471# S2  5  Cursor type         (U = underline, D = block)
7472# S2  6  Cursor down key     (U = send ^J, D = send ^V)
7473# S2  7  Screen colour       (U = green on black, D = black on green)
7474# S2  8  DSR status (pin 6)  (U = disconnected, D = connected)
7475# S2  9  DCD status (pin 8)  (U = disconnected, D = connected)
7476# S2 10  DTR status (pin 20) (U = disconnected, D = connected)
7477#
7478tvi910+|televideo 910+,
7479	dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
7480	kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
7481	kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
7482	ll=\E=7\s, use=tvi910,
7483
7484# (tvi912: removed obsolete ":ma=^K^P^L :", added  <flash> and
7485# <khome> from BRL entry -- esr)
7486tvi912|tvi914|tvi920|old televideo 912/914/920,
7487	OTbs, OTpt, am, msgr,
7488	cols#80, it#8, lines#24, xmc#1,
7489	bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7490	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7491	dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
7492	ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
7493	il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
7494	kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
7495	kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
7496	kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
7497	tbc=\E3,
7498# We got some new tvi912c terminals that act really weird on the regular
7499# termcap, so one of our gurus worked this up. Seems that cursor
7500# addressing is broken.
7501tvi912cc|tvi912 at cowell college,
7502	cup@, use=tvi912c,
7503
7504# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
7505# From: Benjamin C. W. Sittler
7506#
7507# Someone has put a scanned copy of the manual online at:
7508#     http://vt100.net/televideo/912b-om/
7509#
7510# These terminals were produced ca. 1979, and had a 12" monochrome
7511# screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
7512# ASCII, and were generally similar to adm3a but with attributes
7513# (including some with magic cookies), fancy half-duplex mode, and
7514# different bugs.
7515#
7516# Some operations reqire truly incredible amounts of padding. The
7517# insert_line (<il1>) and delete_line (<dl1>) operations in particular
7518# are so slow as to be nearly unusable.
7519#
7520# There may or may not have been a separate, earlier series of 912/920
7521# terminals (without the "B" and "C" suffix); I have never seen one,
7522# and the manual only describes the "B" and "C" series. The 912 and 920
7523# are quite distinct from the 914 and 924, which were much nicer non-
7524# magic-cookie terminals similar to the 950.
7525#
7526# This is a new description for the following TeleVideo terminals,
7527# distinguished chiefly by their keyboards:
7528#
7529#   TVI-912B - very odd layout, no function keys (84 keys)
7530#   TVI-920B - typewriter layout, no function keys (103 keys)
7531#   TVI-912C - very odd layout, function keys F1-F11 (82 keys)
7532#   TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
7533#
7534# To choose a setting for the TERM variable, start with the model:
7535#
7536#    Model  || base name
7537# ----------||-----------
7538#  TVI-912B || tvi912b
7539#  TVI-912C || tvi912c
7540#  TVI-920B || tvi920b
7541#  TVI-920C || tvi920c
7542#
7543# Then add a suffix from the following table describing installed options
7544# and how you'd like to use the terminal:
7545#
7546#   Use Video | Second | Visual |  Magic  |  Page || feature
7547#  Attributes |  Page  |  Bell  | Cookies | Print || suffix
7548# ------------|--------|--------|---------|-------||---------
7549#      No     |   No   |  N/A   |   N/A   |   No  || -unk
7550#      No     |   No   |  N/A   |   N/A   |  Yes  || -p
7551#      No     |  Yes   |   No   |   N/A   |   No  || -2p-unk
7552#      No     |  Yes   |   No   |   N/A   |  Yes  || -2p-p
7553#      No     |  Yes   |  Yes   |   N/A   |   No  || -vb-unk
7554#      No     |  Yes   |  Yes   |   N/A   |  Yes  || -vb-p
7555#     Yes     |   No   |  N/A   |    No   |  N/A  ||
7556#     Yes     |   No   |  N/A   |   Yes   |  N/A  || -mc
7557#     Yes     |  Yes   |   No   |    No   |  N/A  || -2p
7558#     Yes     |  Yes   |   No   |   Yes   |  N/A  || -2p-mc
7559#     Yes     |  Yes   |  Yes   |    No   |  N/A  || -vb
7560#     Yes     |  Yes   |  Yes   |   Yes   |  N/A  || -vb-mc
7561#
7562# So e.g. a model 920 C with second page memory option, visual bell
7563# and no magic cookies would be tvi920c-vb; a model 912 B without the
7564# second page memory option and using magic cookies would be
7565# tvi912b-mc
7566#
7567# PADDING
7568#
7569# At 9600 baud, the terminal is prone to overflow its input buffer
7570# during complex operations (insert/delete
7571# character/line/screen/page), and it does not signal this over the
7572# RS232 cable. The typical symptom of an overrun is that the terminal
7573# starts beeping, and output becomes garbled.
7574#
7575# The padding delays in this terminfo were derived using tack(1)
7576# running on a Linux box connected to a TVI-920C with a later-model
7577# (A49C1-style) ROM running at 9600 baud, so your mileage may
7578# vary. The numbers below seem to give the terminal enough time so
7579# that it doesn't overflow its input buffer and start losing
7580# characters.
7581#
7582# KEYS
7583#
7584# If you want to use the FUNCT key on a tvi912[bc], use the
7585# corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
7586# the following table (these also work on the 920 series):
7587#
7588# Unshifted Function Keys:
7589#
7590#  Key | capname|| Equivalent
7591# -----|--------||------------
7592#   F1 |  <kf1> || FUNCT + @
7593#   F2 |  <kf2> || FUNCT + A
7594#   F3 |  <kf3> || FUNCT + B
7595#   F4 |  <kf4> || FUNCT + C
7596#   F5 |  <kf5> || FUNCT + D
7597#   F6 |  <kf6> || FUNCT + E
7598#   F7 |  <kf7> || FUNCT + F
7599#   F8 |  <kf8> || FUNCT + G
7600#   F9 |  <kf9> || FUNCT + H
7601#  F10 | <kf10> || FUNCT + I
7602#  F11 | <kf11> || FUNCT + J
7603#
7604# Shifted Function Keys:
7605#
7606#  SHIFT + Key | capname|| Equivalent
7607# -------------|--------||------------
7608#   SHIFT + F1 | <kf12> || FUNCT + `
7609#   SHIFT + F2 | <kf13> || FUNCT + a
7610#   SHIFT + F3 | <kf14> || FUNCT + b
7611#   SHIFT + F4 | <kf15> || FUNCT + c
7612#   SHIFT + F5 | <kf16> || FUNCT + d
7613#   SHIFT + F6 | <kf17> || FUNCT + e
7614#   SHIFT + F7 | <kf18> || FUNCT + f
7615#   SHIFT + F8 | <kf19> || FUNCT + g
7616#   SHIFT + F9 | <kf20> || FUNCT + h
7617#  SHIFT + F10 | <kf21> || FUNCT + i
7618#  SHIFT + F11 | <kf22> || FUNCT + j
7619#
7620# PORTS AND SWITCH SETTINGS
7621#
7622# Here are the switch settings for the TVI-912B/TVI-920B and
7623# TVI-912C/TVI-920C:
7624#
7625# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
7626# 2: 9600	3: 4800		4: 2400		5: 1200
7627# 6:  600	7:  300		8:  150		9:   75
7628# 10: 110
7629#
7630# S2 UART/Terminal options:
7631# 		Up			Down
7632# 1:		Not used		Not allowed
7633# 2:	Alternate character set	  Standard character set
7634# 3:	    Full duplex		    Half duplex
7635# 4:	    50 Hz refresh	    60 Hz refresh
7636# 5:	      No parity		     Send parity
7637# 6:	     2 stop bits	     1 stop bit
7638# 7:	     8 data bits	     7 data bits
7639# 8:		Not used		Not allowed on Rev E or lower
7640# 9:	     Even parity	     Odd parity
7641# 10:	    Steady cursor	    Blinking cursor
7642# 	(On Rev E or lower, use W25 instead of switch 10.)
7643#
7644# S5 UART/Terminal options:
7645# 		Open			Closed
7646# 1:	P3-6 Not connected	DSR received on P3-6
7647# 2:	P3-8 Not connected	DCD received on P3-8
7648#
7649# 3 Open, 4 Open:		P3-20 Not connected
7650# 3 Open, 4 Closed:	DTR on when terminal is on
7651# 3 Closed, 4 Open:	DTR is connected to RTS
7652# 3 Closed, 4 Closed:	Not allowed
7653#
7654# 5 Closed:	HDX printer (hardware control) Rev. K with extension port off,
7655# 		all data transmitted out of the modem port (P3) will also be
7656# 		transmitted out of the printer port (P4).
7657#
7658# 6 Open, 7 Open:		Not allowed
7659# 6 Open, 7 Closed:	20ma current loop input
7660# 6 Closed, 7 Open:	RS232 input
7661# 6 Closed, 7 Closed:	Not allowed
7662#
7663# Jumper options:
7664# If the jumper is installed, the effect will occur (the next time the terminal
7665# is switched on).
7666#
7667# S4/W31:	Enables automatic LF upon receipt of CR from
7668# 		remote or keyboard.
7669# S4/W32:	Enables transmission of EOT at the end of Send.  If not
7670# 		installed, a carriage return is sent.
7671# S4/W33:	Disables automatic carriage return in column 80.
7672# S4/W34:	Selects Page Print Mode as initial condition.  If not
7673# 		installed, Extension Mode is selected.
7674#
7675# NON-STANDARD CAPABILITIES
7676#
7677# Sending <u9> or <u7> returns a cursor position report in the format
7678# YX\r, where Y and X are as in <cup>. This format is described in
7679# <u8> and <u6>, but it's not clear how one should write an
7680# appropriate scanf string, since we need to subtract %' ' from the
7681# character after reading it. The <u9> capability is used by tack(1)
7682# to synchronize during padding tests, and seems to work for that
7683# purpose.
7684#
7685# This description also includes the obsolete termcap capabilities
7686# has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
7687#
7688# FEATURES NOT YET DESCRIBED IN THIS TERMINFO
7689#
7690# The FUNCT modifier actually works with every normal key by sending
7691# ^AX\r, where X is the sequence normally sent by that key. This is a
7692# sort of meta key not currently describable in terminfo.
7693#
7694# There are quite a few other keys (especially on the 920 models,) but
7695# they are for the most part only useful in block mode.
7696#
7697# These terminals have lots of forms manipulation features, mainly
7698# useful in block mode, including "clear X to nulls" (vs. "clear X to
7699# spaces"; nulls are sentinels for "send X" operations); "send X"
7700# operations for uploading all or part of the screen; and block-mode
7701# editing keys (they don't send escape sequences, but manipulate video
7702# memory directly). Block mode is used for local editing, and protect
7703# mode (in conjunction with the "write protect" attribute,
7704# a.k.a. half-intensity outside of protect mode) is used to control
7705# which parts of the screen are edited/sent/printed (by <mc0>).
7706#
7707# There are at least two major families of ROM, "early" and
7708# A49B1/A49C1; the major difference seems to be that the latter ROMs
7709# support a few extra escape sequences for manipulating the off-screen
7710# memory page, and for sending whole pages back to the host (mainly
7711# useful in block mode.) The descriptions in this file don't use any
7712# of those sequences: set cursor position including page (\E-PYX,
7713# where P is \s for page 0 and ! for page 1 [actually only the LSB of
7714# P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
7715# as in <cup>); read cursor position (\E/), which is analogous to <u9>
7716# and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
7717# are as in <cup>, and some "send page" features mainly useful for
7718# forms manipulation.
7719#
7720# The keyboard enable (\E") and disable (\E#) sequences are unused,
7721# except that a terminal reset (<is2>) enables the keyboard.
7722#
7723# Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
7724# enabled in <is2>, but auto-flip is very jarring so we don't use it.
7725#
7726# BUGS
7727#
7728# At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
7729# sequences (I infer that in some TeleVideo terminal they may invert
7730# and uninvert the display) so the <flash> sequence given here is a
7731# cheesy page-flip instead.
7732#
7733# The back_tab (<cbt>) sequence (\EI) doesn't work according to
7734# tack(1), so it is not included in the descriptions below.
7735#
7736# It's not clear whether auto_left_margin (<bw>) flag should be set
7737# for these terminals; tack says yes, so it is set here, but this
7738# differs from other descriptions I've seen.
7739#
7740# Extension print mode (<mc5>) echoes all characters to the printer
7741# port [in addition to displaying them] except for the page print mode
7742# sequence (<mc4>); this is a slight violation of the terminfo
7743# definition for <mc5> but I don't expect it to cause problems.  We
7744# reset to page print mode in <rs1> since it may have been enabled
7745# accidentally.
7746#
7747# The descriptions with plus signs (+) are building blocks.
7748
7749tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
7750	OTbs, OTpt, am, bw,
7751	cols#80, it#8, lines#24,
7752	bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7753	cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
7754	dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
7755	home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
7756	if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
7757	ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
7758	kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
7759	mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
7760	u7=\E?, u8=%c%c\r, u9=\E?,
7761
7762# This isn't included in the basic capabilities because it is
7763# typically unusable in combination with the full range of video
7764# attributes, since the magic cookie attributes turn into ASCII
7765# control characters, and the half-intensity ("protected") attribute
7766# converts all affected characters to spaces.
7767
7768tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
7769	mc0=\EP,
7770
7771# This uses half-intensity mode (<dim>) for standout (<smso>), and
7772# exposes no other attributes (half-intensity is the only attribute
7773# that does not generate a magic cookie.)
7774
7775tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
7776	msgr,
7777	dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
7778	smso=\E),
7779
7780# Full magic-cookie attribute support, with half-intensity reverse
7781# video for standout. Note that we add a space in the <dim> sequence
7782# to give a consistent magic-cookie count. Also note that <sgr> uses
7783# backspacing (in the TVI-supported order) to apply all requested
7784# attributes with only a single magic cookie.
7785
7786tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
7787	xmc#1,
7788	blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
7789	rmul=\Em,
7790	sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
7791	sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
7792
7793# This uses the second page memory option to save & restore screen
7794# contents. If your terminal is missing the option, this description
7795# should still work, but that has not been tested.
7796
7797tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
7798	flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
7799	smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
7800
7801# This simulates flashing by briefly toggling to the other page
7802# (kludge!)
7803
7804tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
7805	bel=\EK$<100>\EK, use=tvi912b+2p,
7806
7807# Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
7808
7809tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
7810	kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
7811	kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
7812	kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
7813	kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7814	kf8=^AG\r, kf9=^AH\r,
7815
7816# Combinations of the basic building blocks
7817
7818tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
7819	use=tvi912b+2p, use=tvi912b-unk,
7820
7821tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
7822	use=tvi912b+vb, use=tvi912b-unk,
7823
7824tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
7825	use=tvi912b+printer, use=tvi912b-unk,
7826
7827tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
7828	use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
7829
7830tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
7831	use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
7832
7833tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
7834	use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
7835
7836tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
7837	use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
7838
7839tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
7840	use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
7841
7842tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
7843	use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
7844
7845tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
7846	use=tvi912b+dim, use=tvi912b-unk,
7847
7848tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
7849	use=tvi912b+mc, use=tvi912b-unk,
7850
7851tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
7852	use=tvi920b+fn, use=tvi912b-unk,
7853
7854tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
7855	use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
7856
7857tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
7858	use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
7859
7860tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
7861	use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
7862
7863tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
7864	use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
7865	use=tvi912b-unk,
7866
7867tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
7868	use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
7869	use=tvi912b-unk,
7870
7871tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
7872	use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
7873	use=tvi912b-unk,
7874
7875tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
7876	use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
7877	use=tvi912b-unk,
7878
7879tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
7880	use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
7881	use=tvi912b-unk,
7882
7883tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
7884	use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
7885	use=tvi912b-unk,
7886
7887tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
7888	use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
7889
7890tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
7891	use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
7892
7893# Televideo 921 and variants
7894# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
7895# (tvi921: removed :ko=bt: before translation, I see no backtab cap;
7896# also added empty <acsc> to suppress tic warning -- esr)
7897tvi921|televideo model 921 with sysline same as page & real vi function,
7898	OTbs, OTpt, am, hs, xenl, xhp,
7899	cols#80, lines#24, xmc#0,
7900	acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7901	cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
7902	cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
7903	el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
7904	if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
7905	is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
7906	kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
7907	ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
7908	rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
7909# without the beeper
7910# (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
7911# also added empty <acsc> to suppress tic warning -- esr)
7912tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
7913	am, hs, xenl, xhp,
7914	cols#80, lines#24, xmc#0,
7915	acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7916	cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
7917	cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
7918	el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
7919	ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
7920	invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
7921	kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
7922	kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
7923	nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
7924# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
7925tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
7926	dl1=\ER$<2*/>, il1=\EE$<2*/>,
7927	is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
7928	kil1=\EE$<2*/>, use=tvi92B,
7929
7930# (tvi924: This used to have <dsl=\Es0>, <fsl=\031>.  I put the new strings
7931# in from a BSD termcap file because it looks like they do something the
7932# old ones skip -- esr)
7933tvi924|televideo tvi924,
7934	am, bw, hs, in, mir, msgr, xenl, xon,
7935	cols#80, it#8, lines#24, wsl#80, xmc#0,
7936	bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
7937	cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
7938	cub1=^H, cud1=^V, cuf1=^L,
7939	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
7940	dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
7941	flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
7942	ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
7943	invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
7944	kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
7945	kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
7946	kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
7947	kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
7948	kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
7949	kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
7950	lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
7951	pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
7952	use=adm+sgr,
7953
7954# TVI925 DIP switches.  In each of these, D = Down and U = Up,
7955#
7956# Here are the settings for the external (baud) switches (S1):
7957#
7958#             Position		Baud
7959# 7	8	9	10		[Printer]
7960# 1	2	3	4		[Main RS232]
7961# -----------------------------------------------------
7962# D	D	D	D	9600
7963# D	D	D	U	  50
7964# D	D	U	D	  75
7965# D	D	U	U	 110
7966# D	U	D	D	 135
7967# D	U	D	U	 150
7968# D	U	U	D	 300
7969# D	U	U	U	 600
7970# U	D	D	D	1200
7971# U	D	D	U	1800
7972# U	D	U	D	2400
7973# U	D	U	U	3600
7974# U	U	D	D	4800
7975# U	U	D	U	7200
7976# U	U	U	D	9600
7977# U	U	U	U	19200
7978#
7979#
7980# Settings for word length and stop-bits (S1)
7981#
7982#  Position	Description
7983# 5	6
7984# ---------------------------
7985# U	-	7-bit word
7986# D	-	8-bit word
7987# -	U	2 stop bits
7988# -	D	1 stop bit
7989#
7990#
7991# S2 (external) settings
7992#
7993# Position	Up	Dn	Description
7994# --------------------------------------------
7995# 1		X		Local edit
7996# 			X	Duplex edit (transmit editing keys)
7997# --------------------------------------------
7998# 2		X		912/920 emulation
7999# 			X	925
8000# --------------------------------------------
8001# 3			X
8002# 4			X	No parity
8003# 5			X
8004# --------------------------------------------
8005# 3			X
8006# 4			X	Odd parity
8007# 5		X
8008# --------------------------------------------
8009# 3			X
8010# 4		X		Even parity
8011# 5		X
8012# --------------------------------------------
8013# 3		X
8014# 4			X	Mark parity
8015# 5		X
8016# --------------------------------------------
8017# 3		X
8018# 4		X		Space parity
8019# 5		X
8020# --------------------------------------------
8021# 6		X		White on black display
8022# 			X	Black on white display
8023# --------------------------------------------
8024# 7			X	Half Duplex
8025# 8			X
8026# --------------------------------------------
8027# 7		X		Full Duplex
8028# 8			X
8029# --------------------------------------------
8030# 7			X	Block mode
8031# 8		X
8032# --------------------------------------------
8033# 9			X	50 Hz
8034# 		X		60 Hz
8035# --------------------------------------------
8036# 10		X		CR/LF (Auto LF)
8037# 			X	CR only
8038#
8039# S3 (internal switch) settings:
8040#
8041# Position	Up	Dn	Description
8042# --------------------------------------------
8043# 1		X		Keyclick off
8044# 			X	Keyclick on
8045# --------------------------------------------
8046# 2			X	English
8047# 3			X
8048# --------------------------------------------
8049# 2			X	German
8050# 3		X
8051# --------------------------------------------
8052# 2		X		French
8053# 3			X
8054# --------------------------------------------
8055# 2		X		Spanish
8056# 3		X
8057# --------------------------------------------
8058# 4			X	Blinking block cursor
8059# 5			X
8060# --------------------------------------------
8061# 4			X	Blinking underline cursor
8062# 5		X
8063# --------------------------------------------
8064# 4		X		Steady block cursor
8065# 5			X
8066# --------------------------------------------
8067# 4		X		Steady underline cursor
8068# 5		X
8069# --------------------------------------------
8070# 6		X		Screen blanking timer (ON)
8071# 			X	Screen blanking timer (OFF)
8072# --------------------------------------------
8073# 7		X		Page attributes
8074# 			X	Line attributes
8075# --------------------------------------------
8076# 8		X		DCD disconnected
8077# 			X	DCD connected
8078# --------------------------------------------
8079# 9		X		DSR disconnected
8080# 			X	DSR connected
8081# --------------------------------------------
8082# 10		X		DTR Disconnected
8083# 			X	DTR connected
8084# --------------------------------------------
8085#
8086# (tvi925: BSD has <clear=\E*>.  I got <is2> and <ri> from there -- esr)
8087tvi925|televideo 925,
8088	OTbs, am, bw, hs, ul,
8089	cols#80, lines#24, xmc#1,
8090	bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
8091	cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8092	cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
8093	flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
8094	ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
8095	kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8096	ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
8097	kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8098	kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
8099	tsl=\Eh\Ef, use=adm+sgr,
8100# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
8101# to avoid "magic cookie" standout glitch:
8102tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
8103	xmc@,
8104	kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
8105
8106# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
8107# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
8108# for additional capabilities,
8109# The following tvi descriptions from B:pjphar and virus!mike
8110# is for all 950s.  It sets the following attributes:
8111# full duplex (\EDF)		write protect off (\E()
8112# conversation mode (\EC)	graphics mode off (\E%)
8113# white on black (\Ed)		auto page flip off (\Ew)
8114# turn off status line (\Eg)	clear status line (\Ef\r)
8115# normal video (\E0)		monitor mode off (\EX or \Eu)
8116# edit mode (\Er)		load blank char to space (\Ee\040)
8117# line edit mode (\EO)		enable buffer control (^O)
8118# protect mode off (\E\047)	duplex edit keys (\El)
8119# program unshifted send key to send line all (\E016)
8120# program shifted send key to send line unprotected (\E004)
8121# set the following to nulls:
8122#	field delimiter (\Ex0\200\200)
8123#	line delimiter (\Ex1\200\200)
8124#	start-protected field delimiter (\Ex2\200\200)
8125#	end-protected field delimiter (\Ex3\200\200)
8126# set end of text delimiter to carriage return/null (\Ex4\r\200)
8127#
8128#                     TVI 950 Switch Setting Reference Charts
8129#
8130#                                     TABLE 1:
8131#
8132#      S1     1     2     3     4     5     6     7     8     9    10
8133#          +-----------------------+-----+-----+-----------------------+
8134#          | Computer Baud Rate    |Data |Stop | Printer Baud Rate     |
8135#          |                       |Bits |Bits |                       |
8136#   +------+-----------------------+-----+-----+-----------------------+
8137#   |  Up  |        See            |  7  |  2  |        See            |
8138#   +------+-----------------------+-----+-----+-----------------------+
8139#   | Down |      TABLE 2          |  8  |  1  |      TABLE 2          |
8140#   +------+-----------------------+-----+-----+-----------------------+
8141#
8142#
8143#      S2     1     2     3     4     5     6     7     8     9    10
8144#          +-----+-----+-----------------+-----+-----------+-----+-----+
8145#          |Edit |Cursr|    Parity       |Video|Transmiss'n| Hz  |Click|
8146#   +------+-----+-----+-----------------+-----+-----------+-----+-----+
8147#   |  Up  | Dplx|Blink|      See        |GonBk|   See     | 60  | Off |
8148#   +------+-----+-----+-----------------+-----+-----------+-----+-----+
8149#   | Down |Local|St'dy|    TABLE 3      |BkonG|  CHART    | 50  | On  |
8150#   +------+-----+-----+-----------------+-----+-----------+-----+-----+
8151#
8152#                                    TABLE 2:
8153#
8154#             +-----------+-----+-----+-----+-----+-----------+
8155#             | Display   |  1  |  2  |  3  |  4  |   Baud    |
8156#             +-----------+-----+-----+-----+-----+           |
8157#             | Printer   |  7  |  8  |  9  | 10  |   Rate    |
8158#             +-----------+-----+-----+-----+-----+-----------+
8159#                         |  D  |  D  |  D  |  D  |   9600    |
8160#                         |  U  |  D  |  D  |  D  |     50    |
8161#                         |  D  |  U  |  D  |  D  |     75    |
8162#                         |  U  |  U  |  D  |  D  |    110    |
8163#                         |  D  |  D  |  U  |  D  |    135    |
8164#                         |  U  |  D  |  U  |  D  |    150    |
8165#                         |  D  |  U  |  U  |  D  |    300    |
8166#                         |  U  |  U  |  U  |  D  |    600    |
8167#                         |  D  |  D  |  D  |  U  |   1200    |
8168#                         |  U  |  D  |  D  |  U  |   1800    |
8169#                         |  D  |  U  |  D  |  U  |   2400    |
8170#                         |  U  |  U  |  D  |  U  |   3600    |
8171#                         |  D  |  D  |  U  |  U  |   4800    |
8172#                         |  U  |  D  |  U  |  U  |   7200    |
8173#                         |  D  |  U  |  U  |  U  |   9600    |
8174#                         |  U  |  U  |  U  |  U  |  19200    |
8175#                         +-----+-----+-----+-----+-----------+
8176#
8177#                                    TABLE 3:
8178#                         +-----+-----+-----+-----------+
8179#                         |  3  |  4  |  5  |   Parity  |
8180#                         +-----+-----+-----+-----------+
8181#                         |  X  |  X  |  D  |    None   |
8182#                         |  D  |  D  |  U  |     Odd   |
8183#                         |  D  |  U  |  U  |    Even   |
8184#                         |  U  |  D  |  U  |    Mark   |
8185#                         |  U  |  U  |  U  |   Space   |
8186#                         +-----+-----+-----+-----------+
8187#                                 X = don't care
8188#
8189#                                     CHART:
8190#                         +-----+-----+-----------------+
8191#                         |  7  |  8  | Communication   |
8192#                         +-----+-----+-----------------+
8193#                         |  D  |  D  |  Half Duplex    |
8194#                         |  D  |  U  |  Full Duplex    |
8195#                         |  U  |  D  |     Block       |
8196#                         |  U  |  U  |     Local       |
8197#                         +-----+-----+-----------------+
8198#
8199# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
8200# I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
8201# should be present and all tvi native modes use the same string for this.
8202# Finally, note that BSD has cud1=^V. -- esr)
8203tvi950|televideo 950,
8204	OTbs, am, hs, mir, msgr, xenl, xon,
8205	cols#80, it#8, lines#24, xmc#1,
8206	acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
8207	cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8208	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8209	dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
8210	fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
8211	invis@,
8212	is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
8213	kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
8214	kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
8215	kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8216	kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8217	kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
8218	rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
8219	use=adm+sgr,
8220#
8221# is for 950 with two pages adds the following:
8222#	set 48 line page (\E\\2)
8223#	place cursor at page 0, line 24, column 1 (\E-07 )
8224#	set local (no send) edit keys (\Ek)
8225#
8226# two page 950 adds the following:
8227#	when entering ex, set 24 line page (\E\\1)
8228#	when exiting ex, reset 48 line page (\E\\2)
8229#			 place cursor at 0,24,1 (\E-07 )
8230#	set duplex (send) edit keys (\El) when entering vi
8231#	set local (no send) edit keys (\Ek) when exiting vi
8232#
8233tvi950-2p|televideo950 w/2 pages,
8234	is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
8235	rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8236	smkx=\El, use=tvi950,
8237#
8238# is for 950 with four pages adds the following:
8239#	set 96 line page (\E\\3)
8240#	place cursor at page 0, line 24, column 1 (\E-07 )
8241#
8242# four page 950 adds the following:
8243#	when entering ex, set 24 line page (\E\\1)
8244#	when exiting ex, reset 96 line page (\E\\3)
8245#			 place cursor at 0,24,1 (\E-07 )
8246#
8247tvi950-4p|televideo950 w/4 pages,
8248	is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
8249	rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8250	smkx=\El, use=tvi950,
8251#
8252# <is2> for reverse video 950 changes the following:
8253#	set reverse video (\Ed)
8254#
8255# set vb accordingly (\Ed ...delay... \Eb)
8256#
8257tvi950-rv|televideo950 rev video,
8258	flash=\Ed$<200/>\Eb,
8259	is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
8260	use=tvi950,
8261
8262# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
8263tvi950-rv-2p|televideo950 rev video w/2 pages,
8264	flash=\Ed$<200/>\Eb,
8265	is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
8266	rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8267	smkx=\El, use=tvi950,
8268
8269# tvi950-rv uses the appropriate entries from 950-4p and 950-rv
8270tvi950-rv-4p|televideo950 rev video w/4 pages,
8271	flash=\Ed$<200/>\Eb,
8272	is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
8273	rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8274	smkx=\El, use=tvi950,
8275# From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
8276# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
8277# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
8278# the :rs: string, inserted the <ich> implied by the termcap :ko: string.  Note
8279# the :ko: string had :cl: in it, which means that one of the original
8280# <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
8281# the 950 has.   Finally, corrected the <kel> string to match the 950 and what
8282# ko implies -- esr)
8283# If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
8284# also work.
8285tvi955|televideo 955,
8286	OTbs, mc5i, msgr@,
8287	it#8, xmc@,
8288	acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
8289	civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
8290	cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
8291	is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
8292	knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
8293	rmam=\E[=7l, rmxon=^N,
8294	rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
8295	sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
8296	use=tvi950,
8297tvi955-w|955-w|televideo955 w/132 cols,
8298	cols#132,
8299	is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
8300# use half-intensity as normal mode, full intensity as <bold>
8301tvi955-hb|955-hb|televideo955 half-bright,
8302	bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
8303	sgr0=\EG0\E[=5h, use=tvi955,
8304# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
8305# (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
8306# added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
8307# According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
8308# it does to the function keys.  I deduced <rmam>/<smam>.
8309# also added empty <acsc> to suppress tic warning,  -- esr)
8310tvi970|televideo 970,
8311	OTbs, OTpt, am, da, db, mir, msgr,
8312	cols#80, it#8, lines#24,
8313	acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
8314	cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
8315	cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
8316	ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
8317	hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
8318	is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
8319	kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8320	kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
8321	kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
8322	rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
8323	sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
8324	smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
8325	smul=\E[4m, vpa=\E[%i%p1%dd,
8326tvi970-vb|televideo 970 with visual bell,
8327	flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
8328	use=tvi970,
8329tvi970-2p|televideo 970 with using 2 pages of memory,
8330	rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
8331	use=tvi970,
8332# Works with vi and rogue.  NOTE: Esc v sets autowrap on, Esc u sets 80 chars
8333# per line (rather than 40), Esc K chooses the normal character set.  Not sure
8334# padding is needed, but adapted from the tvi920c termcap.  The <smso> and
8335# <smul> strings are klutzy, but at least use no screen space.
8336# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:".  I wish we knew <rmam>,
8337# its absence means <smam>=\Ev isn't safe to use. -- esr)
8338# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
8339# The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
8340# F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
8341tvipt|televideo personal terminal,
8342	OTbs, am,
8343	cols#80, lines#24,
8344	cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
8345	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
8346	ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
8347	il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
8348	kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
8349	rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
8350# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
8351tvi9065|televideo 9065,
8352	am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
8353	cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
8354	wnum#0, wsl#30,
8355	acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
8356	blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
8357	cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
8358	cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
8359	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
8360	cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
8361	dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
8362	el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
8363	ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
8364	il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
8365	ip=$<3>,
8366	is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
8367	is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
8368	kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
8369	kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
8370	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8371	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
8372	mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
8373	pfkey=\E|%p1%{48}%+%c3%p2%s\031,
8374	pfloc=\E|%p1%{48}%+%c2%p2%s\031,
8375	pfx=\E|%p1%{48}%+%c1%p2%s\031,
8376	pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
8377	rep=\E[%p2%db%p1%c, rev=\EG4,
8378	rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
8379	rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
8380	rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
8381	rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
8382	rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
8383	rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
8384	sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
8385	sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
8386	smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
8387	tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
8388
8389#### Visual (vi)
8390#
8391# In September 1993, Visual Technology of Westboro, Massachusetts,
8392# merged with White Pine Software of Nashua, New Hampshire.
8393#
8394# White Pine Software may be contacted at +1 603/886-9050.
8395# Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
8396#
8397
8398# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
8399# Recently I hacked together the following termcap for Visual
8400# Technology's Visual 50 terminal. It's a slight modification of
8401# the vt52 termcap.
8402# It's intended to run when the Visual 50 is in vt52 emulation mode
8403# (I know what you're thinking; if it's emulating a vt52, then why
8404# another termcap? Well, it turns out that the Visual 50 can handle
8405# <dl1> and db(?) among other things, which the vt52 can't)
8406# The termcap works OK for the most part. The only problem is on
8407# character inserts. The whole line gets painfully redrawn for each
8408# character typed. Any suggestions?
8409# Beau's entry is combined with the vi50 entry from University of Wisconsin.
8410# Note especially the <il1> function.  <kf4>-<kf6> are really l4-l6 in
8411# disguise; <kf7>-<kf9> are really l1-l3.
8412vi50|visual 50,
8413	OTbs, OTpt, am, da, db, msgr,
8414	cols#80, it#8, lines#24,
8415	OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
8416	cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8417	cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
8418	ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
8419	kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
8420	kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
8421	nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
8422# this one was BSD & SCO's vi50
8423vi50adm|visual 50 in adm3a mode,
8424	am, msgr,
8425	cols#80, it#8, lines#24,
8426	bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8427	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
8428	ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
8429	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
8430	rmso=\ET, smso=\EU,
8431# From: Jeff Siegal <jbs@quiotix.com>
8432vi55|Visual 55,
8433	OTbs, am, mir, msgr,
8434	cols#80, it#8, lines#24,
8435	clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
8436	cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8437	cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
8438	il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
8439	kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
8440	smir=\Ea, smso=\EU,
8441
8442# Visual 200 from BRL
8443# The following switch settings are assumed for normal operation:
8444#	FULL_DUPLEX		SCROLL			CR
8445#	AUTO_NEW_LINE_ON	VISUAL_200_EMULATION_MODE
8446# Other switches may be set for operator convenience or communication
8447# requirements.
8448# Character insertion is kludged in order to get around the "beep" misfeature.
8449# (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
8450# Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
8451# and <dl1> strings, but we seem to get along fine without them.
8452vi200|visual 200,
8453	OTbs, OTpt, am, mir, msgr,
8454	OTkn#10, cols#80, it#8, lines#24,
8455	acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
8456	cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8457	cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
8458	el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
8459	kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8460	kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
8461	kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
8462	kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
8463	kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
8464	rmacs=\EG, rmkx=\E>, rmso=\E3,
8465	rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
8466	smkx=\E=, smso=\E4, tbc=\Eg,
8467# The older Visuals didn't come with function keys. This entry uses
8468# <smkx> and <rmkx> so that the keypad keys can be used as function keys.
8469# If your version of vi doesn't support function keys you may want
8470# to use vi200-f.
8471vi200-f|visual 200 no function keys,
8472	is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
8473	kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
8474	kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
8475	use=vi200,
8476vi200-rv|visual 200 reverse video,
8477	cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
8478
8479# the function keys are programmable but we don't reprogram them to their
8480# default values with <is2> because programming them is very verbose. maybe
8481# an initialization file should be made for the 300 and they could be stuck
8482# in it.
8483# (vi300: added <rmam>/<smam> based on init string -- esr)
8484vi300|visual 300 ansi x3.64,
8485	am, bw, mir, xenl,
8486	cols#80, lines#24,
8487	bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
8488	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
8489	dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
8490	il1=\E[L, ind=^J,
8491	is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
8492	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8493	kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
8494	kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
8495	kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
8496	rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
8497	smso=\E[1m, smul=\E[4m,
8498# some of the vi300s have older firmware that has the command
8499# sequence for setting editing extent reversed.
8500vi300-old|visual 300 with old firmware (set edit extent reversed),
8501	is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
8502	use=vi300,
8503
8504# Visual 500 prototype entry from University of Wisconsin.
8505# The best place to look for the escape sequences is page A1-1 of the
8506# Visual 500 manual.  The initialization sequence given here may be
8507# overkill, but it does leave out some of the initializations which can
8508# be done with the menus in set-up mode.
8509# The :xp: line below is so that emacs can understand the padding requirements
8510# of this slow terminal.  :xp: is 10 time the padding factor.
8511# (vi500: removed unknown :xp#4: termcap;
8512# also added empty <acsc> to suppress tic warning -- esr)
8513vi500|visual 500,
8514	am, mir, msgr,
8515	cols#80, it#8, lines#33,
8516	acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
8517	csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
8518	cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
8519	dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
8520	el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
8521	ind=^J,
8522	is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
8523	kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
8524	khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
8525	rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
8526
8527# The visual 550 is a visual 300 with tektronix graphics,
8528# and with 33 lines. clear screen is modified here to
8529# also clear the graphics.
8530vi550|visual 550 ansi x3.64,
8531	lines#33,
8532	clear=\030\E[H\E[2J, use=vi300,
8533
8534vi603|visual603|visual 603,
8535	hs, mir,
8536	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
8537	csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
8538	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8539	dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
8540	ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
8541	rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
8542	sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
8543	use=vt100,
8544
8545#### Wyse (wy)
8546#
8547#	Wyse Technology
8548#	3471 North First Street
8549#	San Jose, CA 95134
8550#	Vox: (408)-473-1200
8551#	Fax: (408) 473-1222
8552#	Web: http://www.wyse.com
8553#
8554# Wyse sales can be reached by phone at 1-800-GET-WYSE.  Tech support is at
8555# (800)-800-WYSE (option 5 gets you a human).  There's a Web page at the
8556# obvious address, <http://www.wyse.com>.  They keep terminfo entries at
8557# <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
8558#
8559# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
8560# They now own the Qume and Amdek brands, too.  So these are the people to
8561# talk with about all Link, Qume, and Amdek terminals.
8562#
8563# These entries include a few small fixes.
8564# I canceled the bel capacities in the vb entries.
8565# I made two trivial syntax fixes in the wyse30 entry.
8566# I made some entries relative to adm+sgr.
8567#
8568#
8569# Note: The wyse75, wyse85, and wyse99 have been discontinued.
8570
8571#	   Although the Wyse 30 can support more than one attribute
8572#	it requires magic cookies to do so.  Many applications do not
8573#	function well with magic cookies.  The following terminfo uses
8574#	the protect mode to support one attribute (dim) without cookies.
8575#	If more than one attribute is needed then the wy30-mc terminfo
8576#	should be used.
8577#
8578wy30|wyse30|Wyse 30,
8579	am, bw, hs, mc5i, mir, msgr, xon,
8580	cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8581	acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8582	civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
8583	cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8584	cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
8585	dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
8586	fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
8587	ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
8588	kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
8589	kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
8590	kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8591	kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
8592	kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
8593	mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
8594	pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
8595	rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8596	sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8597	sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8598	smso=\E`7\E), tbc=\E0, tsl=\EF,
8599#
8600#	This terminal description uses the non-hidden attribute mode
8601#	(with magic cookie).
8602#
8603# (wy30-mc: added <smcup> to suppress tic warning --esr)
8604wy30-mc|wyse30-mc|wyse 30 with magic cookies,
8605	msgr@,
8606	ma@, xmc#1,
8607	blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
8608	rmcup=\EG0, rmso=\EG0,
8609	sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8610	sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8611	smso=\EG4, use=wy30, use=adm+sgr,
8612#	The mandatory pause used by <flash> does not work with
8613#	older versions of terminfo.  If you see this effect then
8614#	unset xon and delete the / from the delay.
8615#	i.e. change $<100/> to $<100>
8616wy30-vb|wyse30-vb|wyse 30 visible bell,
8617	bel@, use=wy30,
8618#
8619#	   The Wyse 50 can support one attribute (e.g. Dim, Inverse,
8620#	Normal) without magic cookies by using the protect mode.
8621#	The following description uses this feature, but when more
8622#	than one attribute is put on the screen at once, all attributes
8623#	will be changed to be the same as the last attribute given.
8624#	   The Wyse 50 can support more attributes when used with magic
8625#	cookies.  The wy50-mc terminal description uses magic cookies
8626#	to correctly handle multiple attributes on a screen.
8627#
8628wy50|wyse50|Wyse 50,
8629	am, bw, hs, mc5i, mir, msgr, xon,
8630	cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8631	acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8632	civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
8633	cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8634	cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
8635	ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8636	home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
8637	is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
8638	kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8639	kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8640	kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8641	kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8642	kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8643	kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8644	ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
8645	pfx=\Ez%p1%{63}%+%c%p2%s\177,
8646	pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
8647	ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8648	sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8649	sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8650	smso=\E`6\E), tbc=\E0, tsl=\EF,
8651#
8652#	This terminal description uses the non-hidden attribute mode
8653#	(with magic cookie).
8654#
8655#	The mandatory pause used by flash does not work with some
8656#	older versions of terminfo.  If you see this effect then
8657#	unset <xon> and delete the / from the delay.
8658#	i.e. change $<100/> to $<100>
8659# (wy50-mc: added <smcup> to suppress tic warning --esr)
8660wy50-mc|wyse50-mc|wyse 50 with magic cookies,
8661	msgr@,
8662	ma@, xmc#1,
8663	blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
8664	rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
8665	sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8666	sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8667	smso=\EGt, use=wy50, use=adm+sgr,
8668wy50-vb|wyse50-vb|wyse 50 visible bell,
8669	bel@, use=wy50,
8670wy50-w|wyse50-w|wyse 50 132-column,
8671	cols#132, lw#7, nlab#16, wsl#97,
8672	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8673	use=wy50,
8674wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
8675	bel@, use=wy50-w,
8676
8677#
8678#	The Wyse 350 is a Wyse 50 with color.
8679#	Unfortunately this means that it has magic cookies.
8680#	The color attributes are designed to overlap the reverse, dim and
8681#	underline attributes.  This is nice for monochrome applications
8682#	because you can make underline stuff green (or any other color)
8683#	but for true color applications it's not so hot because you cannot
8684#	mix color with reverse, dim or underline.
8685#	    To further complicate things one of the attributes must be
8686#	black (either the foreground or the background).  In reverse video
8687#	the background changes color with black letters.  In normal video
8688#	the foreground changes colors on a black background.
8689#	    This terminfo uses some of the more advanced features of curses
8690#	to display both color and blink.  In the final analysis I am not
8691#	sure that the wy350 runs better with this terminfo than it does
8692#	with the wy50 terminfo (with user adjusted colors).
8693#
8694#	The mandatory pause used by flash does not work with
8695#	older versions of terminfo.  If you see this effect then
8696#	unset xon and delete the / from the delay.
8697#	i.e. change $<100/> to $<100>
8698#
8699# Bug: The <op> capability resets attributes.
8700wy350|wyse350|Wyse 350,
8701	am, bw, hs, mc5i, mir, xon,
8702	colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
8703	wsl#45, xmc#1,
8704	acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
8705	cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
8706	cub1=^H, cud1=^J, cuf1=^L,
8707	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
8708	dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
8709	flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
8710	il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
8711	is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
8712	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8713	ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8714	kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8715	kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8716	kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8717	kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8718	ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
8719	pfx=\Ez%p1%{63}%+%c%p2%s\177,
8720	pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
8721	rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
8722	setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
8723	sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8724	sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
8725	smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
8726wy350-vb|wyse350-vb|wyse 350 visible bell,
8727	bel@, use=wy350,
8728wy350-w|wyse350-w|wyse 350 132-column,
8729	cols#132, lw#7, nlab#16, wsl#97,
8730	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8731	use=wy350,
8732wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
8733	bel@, use=wy350-w,
8734#
8735#	This terminfo description is untested.
8736#	The wyse100 emulates an adm31, so the adm31 entry should work.
8737#
8738wy100|wyse 100,
8739	hs, mir,
8740	cols#80, lines#24, xmc#1,
8741	bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8742	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8743	dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
8744	invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
8745	kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
8746	kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
8747	rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
8748#
8749#	The Wyse 120/150 has most of the features of the Wyse 60.
8750#	This terminal does not need padding up to 9600 baud!
8751#	<msgr> should be set but the clear screen fails when in
8752#	alt-charset mode.  Try \EcE\s\s\E+\s if the screen is really clear
8753#	then set <msgr>.
8754#
8755wy120|wyse120|wy150|wyse150|Wyse 120/150,
8756	am, bw, hs, km, mc5i, mir, msgr, xon,
8757	cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
8758	acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8759	bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
8760	cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8761	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
8762	dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
8763	flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
8764	hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
8765	is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8766	is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8767	kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8768	kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8769	kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8770	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8771	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8772	kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
8773	mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8774	pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8775	pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8776	pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
8777	rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
8778	rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
8779	rs3=\EwG\Ee($<100>,
8780	sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8781	sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8782	smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8783	tbc=\E0, tsl=\EF, use=adm+sgr,
8784#
8785wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
8786	cols#132, lw#7, nlab#16, wsl#97,
8787	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
8788	rs2=\E`;$<70>, use=wy120,
8789#
8790wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
8791	lh@, lines#25, lw@, nlab@,
8792	pln@, rs3=\EwG\Ee)$<100>, use=wy120,
8793#
8794wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
8795	lh@, lines#25, lw@, nlab@,
8796	pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
8797#
8798wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
8799	bel@, use=wy120,
8800#
8801wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
8802	bel@, use=wy120-w,
8803#
8804#	The Wyse 60 is like the Wyse 50 but with more padding.
8805#	The reset strings are slow and the pad times very depending
8806#	on other parameters such as font loading.  I have tried
8807#	to follow the following outline:
8808#
8809#		<rs1> -> set personality
8810#		<rs2> -> set number of columns
8811#		<rs3> -> set number of lines
8812#		<is1> -> select the proper font
8813#		<is2> -> do the initialization
8814#		<is3> -> set up display memory (2 pages)
8815#
8816#	The Wyse 60's that have vt100 emulation are slower than the
8817#	older Wyse 60's.  This change happened mid-1987.
8818#	The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
8819#
8820#	The meta key is only half right.  This terminal will return the
8821#	high order bit set when you hit CTRL-function_key
8822#
8823#	It may be useful to assign two function keys with the
8824#	values  \E=(\s  look at old data in page 1
8825#	        \E=W,   look at bottom of page 1
8826#	where \s is a space ( ).
8827#
8828#	Note:
8829#	   The Wyse 60 runs faster when the XON/XOFF
8830#	   handshake is turned off.
8831#
8832# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
8833# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
8834wy60|wyse60|Wyse 60,
8835	am, bw, hs, km, mc5i, mir, msgr,
8836	cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
8837	acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8838	bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
8839	cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8840	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8841	dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
8842	ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8843	home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
8844	ip=$<3>, is1=\EcB0\EcC1,
8845	is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8846	is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8847	kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8848	kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8849	kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8850	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8851	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8852	kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
8853	mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8854	pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8855	pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8856	pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
8857	rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
8858	rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
8859	rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
8860	sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8861	sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8862	smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8863	tbc=\E0, tsl=\EF, use=adm+sgr,
8864#
8865wy60-w|wyse60-w|wyse 60 132-column,
8866	cols#132, lw#7, nlab#16, wsl#97,
8867	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
8868	rs2=\EeF$<150>\E`;$<150>, use=wy60,
8869#
8870wy60-25|wyse60-25|wyse 60 80-column 25-lines,
8871	lh@, lines#25, lw@, nlab@,
8872	pln@, rs3=\EwG\Ee)$<200>, use=wy60,
8873wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
8874	lh@, lines#25, lw@, nlab@,
8875	pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
8876#
8877wy60-42|wyse60-42|wyse 60 80-column 42-lines,
8878	lines#42,
8879	clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
8880	dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
8881	ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
8882	ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
8883wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
8884	cols#132, lw#7, nlab#16, wsl#97,
8885	clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
8886	dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
8887	nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
8888#
8889wy60-43|wyse60-43|wyse 60 80-column 43-lines,
8890	lh@, lines#43, lw@, nlab@,
8891	pln@, rs3=\Ee+$<150>, use=wy60-42,
8892wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
8893	lh@, lines#43, lw@, nlab@,
8894	pln@, rs3=\Ee+$<150>, use=wy60-42-w,
8895#
8896wy60-vb|wyse60-vb|Wyse 60 visible bell,
8897	bel@, use=wy60,
8898wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
8899	bel@, use=wy60-w,
8900
8901#	The Wyse-99GT looks at lot like the Wyse 60 except that it
8902#	does not have the 42/43 line mode.  In the Wyse-60 the "lines"
8903#	setup parameter controls the number of lines on the screen.
8904#	For the Wyse 99GT the "lines" setup parameter controls the
8905#	number of lines in a page.  The screen can display 25 lines max.
8906#	    The Wyse-99GT also has personalities for the VT220 and
8907#	Tektronix 4014.  But this has no bearing on the native mode.
8908#
8909#	(msgr) should be set but the clear screen fails when in
8910#	alt-charset mode.  Try \EcE\s\s\E+\s if the screen is really clear
8911#	then set msgr, else use msgr@.
8912#
8913#	u0 -> enter Tektronix mode
8914#	u1 -> exit Tektronix mode
8915#
8916wy99gt|wyse99gt|Wyse 99gt,
8917	msgr@,
8918	clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
8919	el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
8920	il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
8921	ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
8922	u0=\E~>\E8, u1=\E[42h, use=wy60,
8923#
8924wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
8925	cols#132, lw#7, nlab#16, wsl#97,
8926	clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
8927	dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
8928	use=wy99gt,
8929#
8930wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
8931	lh@, lines#25, lw@, nlab@,
8932	pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
8933#
8934wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
8935	lh@, lines#25, lw@, nlab@,
8936	pln@, rs2=\E`;$<150>, use=wy99gt-w,
8937#
8938wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
8939	bel@, use=wy99gt,
8940#
8941wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
8942	bel@, use=wy99gt-w,
8943
8944# Can't set tabs! Other bugs (ANSI mode only):
8945# - can't redefine function keys (anyway, key redefinition in ANSI mode
8946#   is too much complex to be described);
8947# - meta key can't be described (the terminal forgets it when reset);
8948# The xon-xoff handshaking can't be disabled while in ansi personality, so
8949# emacs can't work at speed greater than 9600 baud.  No padding is needed at
8950# this speed.
8951#   dch1 has been commented out because it causes annoying glittering when
8952# vi deletes one character at the beginning of a line with tabs in it.
8953#   dch makes sysgen(1M) have a horrible behaviour when deleting
8954# a screen and makes screen(1) behave badly, so it is disabled too. The nice
8955# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
8956# not, so smir and rmir are commented out as well.
8957# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8958wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
8959	am, km, mc5i, mir, msgr, xenl,
8960	cols#80, it#8, lines#25, vt#3,
8961	acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
8962	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8963	clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
8964	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
8965	cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
8966	cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
8967	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
8968	cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
8969	ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
8970	enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
8971	hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
8972	il1=\E[L, ind=\n$<1>, invis=\E[8m,
8973	is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
8974	kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8975	kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
8976	kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
8977	kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
8978	kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
8979	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
8980	mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
8981	rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
8982	rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
8983	rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
8984	sc=\E7,
8985	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
8986	sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
8987	smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
8988
8989#   This is the american terminal. Here tabs work fine.
8990# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8991wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
8992	hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
8993
8994# This terminal (firmware version 02) has a lot of bugs:
8995# - can't set tabs;
8996# - other bugs in ANSI modes (see above).
8997# This description disables handshaking when using cup. This is because
8998# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
8999# cannot be used at speeds greater than 9600 baud, because at greater
9000# speeds handshaking is needed even for character sending. If you use
9001# DTR handshaking, you can use even greater speeds.
9002# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9003wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
9004	am, bw, hs, km, mc5i, mir, msgr, xon,
9005	cols#80, it#8, lines#25, wsl#46,
9006	acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
9007	blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
9008	cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
9009	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9010	cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
9011	ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
9012	flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
9013	ind=^J, invis=\EG3,
9014	is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
9015	ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
9016	kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
9017	kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
9018	kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
9019	kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
9020	kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9021	kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
9022	nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
9023	rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
9024	rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
9025	sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
9026	sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
9027	smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
9028
9029# This is the american terminal. Here tabs work.
9030# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9031wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
9032	hts=\E1, tbc=\E0, use=wy99f,
9033
9034#
9035#	The Wyse 160 is combination of the WY-60 and the WY-99gt.
9036#	The reset strings are slow and the pad times very depending
9037#	on other parameters such as font loading.  I have tried
9038#	to follow the following outline:
9039#
9040#		<rs1> -> set personality
9041#		<rs2> -> set number of columns
9042#		<rs3> -> set number of lines
9043#		<is1> -> select the proper font
9044#		<is2> -> do the initialization
9045#		<is3> -> set up display memory (2 pages)
9046#
9047#	The display memory may be used for either text or graphics.
9048#	When "Display Memory = Shared" the terminal will have more pages
9049#	but garbage may be left on the screen when you switch from
9050#	graphics to text.  If "Display Memory = Unshared" then the
9051#	text area will be only one page long.
9052#
9053# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
9054# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
9055wy160|wyse160|Wyse 160,
9056	am, bw, hs, km, mc5i, mir, msgr,
9057	cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
9058	acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9059	bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
9060	cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9061	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
9062	dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
9063	el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
9064	hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
9065	is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9066	is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9067	kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9068	kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9069	kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9070	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9071	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
9072	kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
9073	mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
9074	pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9075	pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9076	pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
9077	rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
9078	rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
9079	rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
9080	sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9081	sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9082	smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
9083	tbc=\E0, tsl=\EF, use=adm+sgr,
9084#
9085wy160-w|wyse160-w|wyse 160 132-column,
9086	cols#132, lw#7, nlab#16, wsl#90,
9087	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
9088	rs2=\EeF$<150>\E`;$<150>, use=wy160,
9089#
9090wy160-25|wyse160-25|wyse 160 80-column 25-lines,
9091	lh@, lines#25, lw@, nlab@,
9092	pln@, rs3=\EwG\Ee)$<200>, use=wy160,
9093wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
9094	lh@, lines#25, lw@, nlab@,
9095	pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
9096#
9097wy160-42|wyse160-42|wyse 160 80-column 42-lines,
9098	lines#42,
9099	clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
9100	ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
9101	rs3=\Ee*$<150>, use=wy160,
9102wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
9103	cols#132, lw#7, nlab#16, wsl#90,
9104	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
9105	rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
9106#
9107wy160-43|wyse160-43|wyse 160 80-column 43-lines,
9108	lh@, lines#43, lw@, nlab@,
9109	pln@, rs3=\Ee+$<150>, use=wy160-42,
9110wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
9111	lh@, lines#43, lw@, nlab@,
9112	pln@, rs3=\Ee+$<150>, use=wy160-42-w,
9113#
9114wy160-vb|wyse160-vb|Wyse 160 visible bell,
9115	bel@, use=wy160,
9116wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
9117	bel@, use=wy160-w,
9118#
9119#	The Wyse 75 is a vt100 lookalike without advanced video.
9120#
9121#	   The Wyse 75 can support one attribute (e.g. Dim, Inverse,
9122#	Underline) without magic cookies.  The following description
9123#	uses this capability, but when more than one attribute is
9124#	put on the screen at once, all attributes will be changed
9125#	to be the same as the last attribute given.
9126#	   The Wyse 75 can support more attributes when used with magic
9127#	cookies.  The wy75-mc terminal description uses magic cookies
9128#	to correctly handle multiple attributes on a screen.
9129#
9130wy75|wyse75|wyse 75,
9131	am, hs, mc5i, mir, msgr, xenl, xon,
9132	cols#80, lines#24, ma#1, pb#1201, wsl#78,
9133	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9134	bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
9135	cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
9136	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
9137	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9138	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
9139	dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
9140	dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
9141	ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
9142	enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
9143	home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
9144	ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
9145	ind=\n$<2>, ip=$<1>,
9146	is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
9147	is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
9148	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
9149	kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9150	kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9151	kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
9152	kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
9153	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
9154	khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
9155	kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
9156	mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
9157	rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
9158	rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
9159	sc=\E7,
9160	sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
9161	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9162	smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
9163	tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
9164#
9165#	This terminal description uses the non-hidden attribute mode
9166#	(with magic cookie).
9167#
9168wy75-mc|wyse75-mc|wyse 75 with magic cookies,
9169	msgr@,
9170	ma@, xmc#1,
9171	blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
9172	rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
9173	sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
9174	sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
9175	use=wy75,
9176wy75-vb|wyse75-vb|wyse 75 with visible bell,
9177	pb@,
9178	bel@, use=wy75,
9179wy75-w|wyse75-w|wyse 75 in 132 column mode,
9180	cols#132, wsl#130,
9181	rs2=\E[35h\E[?3h$<80>, use=wy75,
9182wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
9183	pb@,
9184	bel@, use=wy75-w,
9185#
9186#	Wyse 85 emulating a vt220 7 bit mode.
9187#		24 line screen with status line.
9188#
9189#	The vt220 mode permits more function keys but it wipes out
9190#	the escape key.  I strongly recommend that <f11> be set to
9191#	escape (esc).
9192#	The terminal may have to be set for 8 data bits and 2 stop
9193#	bits for the arrow keys to work.
9194#	The Wyse 85 runs faster with XON/XOFF enabled.  Also the
9195#	<dch> and <ich> work best when XON/XOFF is set.  <ich> and
9196#	<dch> leave trash on the screen when used without XON/XOFF.
9197#
9198wy85|wyse85|wyse 85,
9199	am, hs, mc5i, mir, msgr, xenl, xon,
9200	cols#80, it#8, lines#24, wsl#80,
9201	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9202	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9203	clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
9204	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9205	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9206	cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9207	dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
9208	dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
9209	ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
9210	enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
9211	fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
9212	ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
9213	ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
9214	is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
9215	is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
9216	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
9217	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
9218	kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
9219	kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
9220	kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
9221	khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
9222	kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
9223	mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
9224	rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
9225	rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
9226	rs3=\E[?5l, sc=\E7,
9227	sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9228	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9229	smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9230	tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
9231#
9232#	Wyse 85 with visual bell.
9233wy85-vb|wyse85-vb|wyse 85 with visible bell,
9234	bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
9235#
9236#	Wyse 85 in 132-column mode.
9237wy85-w|wyse85-w|wyse 85 in 132-column mode,
9238	cols#132, wsl#132,
9239	rs2=\E[35h\E[?3h$<70>, use=wy85,
9240#
9241#	Wyse 85 in 132-column mode with visual bell.
9242wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
9243	bel@, use=wy85-w,
9244
9245# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
9246# This copes with an apparent firmware bug in the wy85.  He writes:
9247# "What I did was change leave the terminal cursor keys set to Normal
9248# (instead of application), and change \E[ to \233 for all the keys in
9249# terminfo. At one point, I found some reference indicating that this
9250# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
9251# me), but I can't find that and the server under my bookmark to "Wyse
9252# Technical" isn't responding.  So there's the question of wether the wy85
9253# terminfo should reflect the manufactuer's intended behaviour of the terminal
9254# or the actual."
9255wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
9256	am, hs, mc5i, mir, msgr, xenl, xon,
9257	cols#80, it#8, lines#24, wsl#80,
9258	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9259	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9260	clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
9261	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9262	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9263	cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9264	dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
9265	dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
9266	ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
9267	enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
9268	fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
9269	ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
9270	ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
9271	is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
9272	is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
9273	kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
9274	kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
9275	kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
9276	kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
9277	kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
9278	kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
9279	kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
9280	khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
9281	kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
9282	mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
9283	rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
9284	rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
9285	rs3=\E[?5l, sc=\E7,
9286	sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
9287	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9288	smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9289	tsl=\E[40h\E7\E[25;%i%p1%dH,
9290#
9291#	Wyse 185 emulating a vt320 7 bit mode.
9292#
9293#	This terminal always displays 25 lines.  These lines may be used
9294#	as 24 data lines and a terminal status line (top or bottom) or
9295#	25 data lines.  The 48 and 50 line modes change the page size
9296#	and not the number of lines on the screen.
9297#
9298#	The Compose Character key can be used as a meta key if changed
9299#	by set-up.
9300#
9301wy185|wyse185|wyse 185,
9302	am, hs, km, mc5i, mir, msgr, xenl, xon,
9303	cols#80, it#8, lines#24, wsl#80,
9304	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9305	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9306	clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9307	csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9308	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9309	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9310	cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
9311	dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
9312	dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
9313	el=\E[K, el1=\E[1K, enacs=\E)0,
9314	flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
9315	home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
9316	ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
9317	ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9318	is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
9319	is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9320	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
9321	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9322	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
9323	kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
9324	kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9325	kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
9326	knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
9327	lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
9328	ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
9329	rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
9330	rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9331	rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9332	sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9333	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
9334	smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
9335	tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
9336	use=vt220+keypad,
9337#
9338#	Wyse 185 with 24 data lines and top status (terminal status)
9339wy185-24|wyse185-24|wyse 185 with 24 data lines,
9340	hs@,
9341	dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9342	use=wy185,
9343#
9344#	Wyse 185 with visual bell.
9345wy185-vb|wyse185-vb|wyse 185+flash,
9346	bel@, use=wy185,
9347#
9348#	Wyse 185 in 132-column mode.
9349wy185-w|wyse185-w|wyse 185 in 132-column mode,
9350	cols#132, wsl#132,
9351	dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9352	ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
9353#
9354#	Wyse 185 in 132-column mode with visual bell.
9355wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
9356	bel@, use=wy185-w,
9357
9358# wy325 terminfo entries
9359# Done by Joe H. Davis        3-9-92
9360
9361# lines 25  columns 80
9362#
9363wy325|wyse325|Wyse epc,
9364	am, bw, hs, mc5i, mir,
9365	cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
9366	acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9367	bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
9368	cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9369	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
9370	dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
9371	flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
9372	il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
9373	is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9374	is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9375	kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9376	kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9377	kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9378	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9379	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
9380	kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
9381	mc0=\EP, mc4=^T, mc5=\Ed#,
9382	pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9383	pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9384	pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
9385	rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
9386	rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
9387	rs3=\EwG\Ee($<100>,
9388	sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9389	sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9390	smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
9391	tsl=\EF, use=adm+sgr,
9392
9393#
9394# lines 24  columns 80  vb
9395#
9396wy325-vb|wyse325-vb|wyse-325 with visual bell,
9397	bel@, use=wy325,
9398
9399#
9400# lines 24  columns 132
9401#
9402wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
9403	cols#132, lw#7, nlab#16, wsl#97,
9404	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
9405	rs2=\E`;$<70>, use=wy325,
9406#
9407# lines 25  columns 80
9408#
9409wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
9410	lh@, lines#25, lw@, nlab@,
9411	pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9412#
9413# lines 25  columns 132
9414#
9415wy325-25w|wyse325-25w|wy325 132 columns,
9416	lh@, lines#25, lw@, nlab@,
9417	pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9418#
9419# lines 25  columns 132  vb
9420#
9421wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
9422	bel@, use=wy325-w,
9423
9424#
9425# lines 42  columns 80
9426#
9427wy325-42|wyse325-42|wyse-325 42 lines,
9428	lh@, lines#42, lw@, nlab@,
9429	pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9430#
9431# lines 42  columns 132
9432#
9433wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
9434	lh@, lines#42, lw@, nlab@,
9435	pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9436#
9437# lines 42  columns 132  vb
9438#
9439wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
9440	bel@, use=wy325-w,
9441#
9442# lines 43  columns 80
9443#
9444wy325-43|wyse325-43|wyse-325 43 lines,
9445	lh@, lines#43, lw@, nlab@,
9446	pln@, use=wy325,
9447#
9448# lines 43  columns 132
9449#
9450wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
9451	lh@, lines#43, lw@, nlab@,
9452	pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9453#
9454# lines 43  columns 132  vb
9455#
9456wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
9457	bel@, use=wy325-w,
9458
9459#	Wyse 370 -- 24 line screen with status line.
9460#
9461#	The terminal may have to be set for 8 data bits and 2 stop
9462#	bits for the arrow keys to work.
9463#
9464#	If you change keyboards the terminal will send different
9465#	escape sequences.
9466#	The following definition is for the basic terminal without
9467#	function keys.
9468#
9469#	<u0> -> enter Tektronix 4010/4014 mode
9470#	<u1> -> exit  Tektronix 4010/4014 mode
9471#	<u2> -> enter ASCII mode (from any ANSI mode)
9472#	<u3> -> exit  ASCII mode (goto native ANSI mode)
9473#	<u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
9474#	<u5> -> exit  Tek 4207 mode (goto native ANSI mode)
9475#
9476# Bug: The <op> capability resets attributes.
9477wy370-nk|wyse 370 without function keys,
9478	am, ccc, hs, mc5i, mir, msgr, xenl, xon,
9479	colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
9480	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9481	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9482	clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9483	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9484	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9485	cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9486	cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
9487	dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
9488	dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
9489	el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
9490	flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
9491	home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
9492	ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
9493	ind=\n$<2>,
9494	initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
9495	invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
9496	is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
9497	is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
9498	mc5=\E[5i,
9499	oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
9500	op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
9501	rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
9502	rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
9503	rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
9504	rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
9505	sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9506	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
9507	smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
9508	tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
9509	u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
9510	u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
9511#
9512#	Function key set for the ASCII (wy-50 compatible) keyboard
9513#	This is the default 370.
9514#
9515wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
9516	kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9517	kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
9518	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9519	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
9520	kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
9521	kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
9522	knp=\E[U, kpp=\E[V, use=wy370-nk,
9523#
9524#	Function key set for the VT-320 (and wy85) compatible keyboard
9525#
9526wy370-105k|Wyse 370 with 105 key keyboard,
9527	kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9528	kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9529	kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9530	kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
9531	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
9532	khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
9533	kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
9534	use=wy370-nk, use=vt220+keypad,
9535#
9536#	Function key set for the PC compatible keyboard
9537#
9538wy370-EPC|Wyse 370 with 102 key keyboard,
9539	kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9540	kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
9541	kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
9542	kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9543	khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
9544#
9545#	Wyse 370 with visual bell.
9546wy370-vb|Wyse 370 with visible bell,
9547	bel@, use=wy370,
9548#
9549#	Wyse 370 in 132-column mode.
9550wy370-w|Wyse 370 in 132-column mode,
9551	cols#132, wsl#132,
9552	rs2=\E[35h\E[?3h$<70>, use=wy370,
9553#
9554#	Wyse 370 in 132-column mode with visual bell.
9555wy370-wvb|Wyse 370 with visible bell 132-columns,
9556	flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
9557wy370-rv|Wyse 370 reverse video,
9558	rs3=\E[32h\E[?5h, use=wy370,
9559#
9560#	Wyse 99gt Tektronix 4010/4014 emulator,
9561#
9562wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
9563	am, os,
9564	cols#74, lines#35,
9565	bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9566	cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9567	cuu1=^K, ff=^L,
9568	hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9569	home=^]7`x @\037,
9570	hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9571	is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
9572#
9573#	Wyse 160 Tektronix 4010/4014 emulator,
9574#
9575wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
9576	cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9577	home=^]8`g @\037, use=wy99gt-tek,
9578#
9579#	Wyse 370 Tektronix 4010/4014 emulator,
9580#
9581wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
9582	am, os,
9583	cols#80, lines#36,
9584	bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9585	cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
9586	cuu1=^K, ff=^L,
9587	hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9588	home=^]8g @\037,
9589	hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9590	is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
9591	nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
9592
9593# Vendor-supplied Wyse entries end here.
9594
9595#
9596#TITLE:  TERMINFO ENTRY WY520
9597#DATE:   8/5/93
9598# The WY520 terminfo is based on the WY285 entry published on the WYSE
9599# BBS with the addition of more function keys and special keys.
9600#
9601#               rs1 -> set personality
9602#               rs2 -> set number of columns
9603#               rs3 -> set number of lines
9604#               is1 -> select the proper font
9605#               is2 -> do the initialization
9606#               is3 -> If this string is empty then rs3 gets sent.
9607#
9608#       Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
9609#       - The BS key is programmed to generate BS in smcup since
9610#         is2 doesn't seem to work.
9611#       - Remove and shift/Remove: delete a character
9612#       - Insert : enter insert mode
9613#       - Find   : delete to end of file
9614#       - Select : clear a line
9615#       - F11, F12, F13: send default sequences (not ESC, BS, LF)
9616#       - F14 : Home key
9617#       - Bottom status line (host writable line) is used.
9618#       - smkx,rmkx are removed because this would put the numeric
9619#         keypad in Dec application mode which doesn't seem to work
9620#         with SCO applications.
9621#
9622wy520|wyse520|wyse 520,
9623	am, hs, km, mc5i, mir, xenl, xon,
9624	cols#80, it#8, lines#24, wsl#80,
9625	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9626	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9627	clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9628	csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9629	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9630	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9631	cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
9632	dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
9633	ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
9634	enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
9635	hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
9636	il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9637	is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
9638	is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9639	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
9640	kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
9641	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
9642	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
9643	kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
9644	kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
9645	kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
9646	lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9647	rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
9648	rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
9649	rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9650	rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9651	sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9652	sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
9653	smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
9654	tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
9655	vpa=\E[%i%p1%dd, use=vt220+keypad,
9656#
9657#       Wyse 520 with 24 data lines and status (terminal status)
9658wy520-24|wyse520-24|wyse 520 with 24 data lines,
9659	hs@,
9660	dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9661	use=wy520,
9662#
9663#       Wyse 520 with visual bell.
9664wy520-vb|wyse520-vb|wyse 520 with visible bell,
9665	flash=\E[30h\E\,\E[30l$<100>, use=wy520,
9666#
9667#       Wyse 520 in 132-column mode.
9668wy520-w|wyse520-w|wyse 520 in 132-column mode,
9669	cols#132, wsl#132,
9670	dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9671	ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
9672#
9673#       Wyse 520 in 132-column mode with visual bell.
9674wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
9675	flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
9676#
9677#
9678#       Wyse 520 emulating a vt420 7 bit mode.
9679#       The DEL key is programmed to generate BS in is2.
9680#       With EPC keyboard.
9681#       - 'End' key will clear till end of line on EPC keyboard
9682#       - Shift/End : ignored.
9683#       - Insert : enter insert mode.
9684#       - Delete : delete a character (have to change interrupt character
9685#                  to CTRL-C: stty intr '^c') for it to work since the
9686#                  Delete key sends 7FH.
9687wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
9688	kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
9689	kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
9690	use=wy520,
9691#
9692#       Wyse 520 with 24 data lines and status (terminal status)
9693#       with EPC keyboard.
9694wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
9695	hs@,
9696	dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9697	use=wy520-epc,
9698#
9699#       Wyse 520 with visual bell.
9700wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
9701	flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
9702#
9703#       Wyse 520 in 132-column mode.
9704wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
9705	cols#132, wsl#132,
9706	dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9707	ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
9708#
9709#       Wyse 520 in 132-column mode with visual bell.
9710wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
9711	flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
9712#
9713#       Wyse 520 in 80-column, 36 lines
9714wy520-36|wyse520-36|wyse 520 with 36 data lines,
9715	hs@,
9716	lines#36,
9717	dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9718	use=wy520,
9719#
9720#       Wyse 520 in 80-column, 48 lines
9721wy520-48|wyse520-48|wyse 520 with 48 data lines,
9722	hs@,
9723	lines#48,
9724	dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9725	use=wy520,
9726#
9727#       Wyse 520 in 132-column, 36 lines
9728wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
9729	cols#132, wsl#132,
9730	rs2=\E[?3h,
9731	rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9732	use=wy520-36,
9733#
9734#       Wyse 520 in 132-column, 48 lines
9735wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
9736	cols#132, wsl#132,
9737	rs2=\E[?3h,
9738	rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9739	use=wy520-48,
9740#
9741#
9742#       Wyse 520 in 80-column, 36 lines with EPC keyboard
9743wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
9744	hs@,
9745	lines#36,
9746	dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9747	use=wy520-epc,
9748#
9749#       Wyse 520 in 80-column, 48 lines with EPC keyboard
9750wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
9751	hs@,
9752	lines#48,
9753	dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9754	use=wy520-epc,
9755#
9756#       Wyse 520 in 132-column, 36 lines with EPC keyboard
9757wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
9758	cols#132, wsl#132,
9759	rs2=\E[?3h,
9760	rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9761	use=wy520-36pc,
9762#
9763#       Wyse 520 in 132-column, 48 lines with EPC keyboard
9764wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
9765	cols#132, wsl#132,
9766	rs2=\E[?3h,
9767	rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9768	use=wy520-48pc,
9769
9770# From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
9771# (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
9772# file and we don't know what <hts> is -- esr)
9773wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
9774	OTbs, am,
9775	cols#80, it#8, lines#24,
9776	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
9777	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
9778	dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
9779	is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
9780	kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
9781	rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
9782	smul=^N,
9783
9784wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
9785	is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
9786	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9787	khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
9788	use=wy75,
9789
9790# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
9791wy100q|Wyse 100 for Quotron,
9792	OTbs,
9793	cols#80, lines#24, xmc#1,
9794	cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
9795	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9796	dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
9797	is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
9798	kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
9799
9800#### Kermit terminal emulations
9801#
9802# Obsolete Kermit versions may be listed in the section describing obsolete
9803# non-ANSI terminal emulators later in the file.
9804#
9805
9806# KERMIT standard all versions.
9807# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9808# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9809# From: greg small <gts@populi.berkeley.edu> 9-25-84
9810kermit|standard kermit,
9811	OTbs,
9812	cols#80, lines#24,
9813	clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9814	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
9815	el=\EK, home=\EH, is2=K0 Standard Kermit  9-25-84\n,
9816	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
9817kermit-am|standard kermit plus auto-margin,
9818	am,
9819	is2=K1 Standard Kermit plus Automatic Margins\n,
9820	use=kermit,
9821# IBMPC Kermit 1.2.
9822# Bugs: <ed>, <el>: do not work except at beginning of line!  <clear> does
9823# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
9824# line).
9825# From: greg small <gts@populi.berkeley.edu> 8-30-84
9826pckermit|pckermit12|UCB IBMPC Kermit 1.2,
9827	am,
9828	lines#25,
9829	clear=\EH\EJ, ed@, el@,
9830	is2=K2 UCB IBMPC Kermit 1.2  8-30-84\n, use=kermit,
9831# IBMPC Kermit 1.20
9832# Cannot use line 25, now acts funny like ansi special scrolling region.
9833# Initialization must escape from that region by cursor position to line 24.
9834# Cannot use character insert because 1.20 goes crazy if insert at col 80.
9835# Does not use :am: because autowrap is lost when kermit dropped and restarted.
9836# From: greg small <gts@populi.berkeley.edu> 12-19-84
9837pckermit120|UCB IBMPC Kermit 1.20,
9838	it#8, lines#24,
9839	cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
9840	il1=\EL,
9841	is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20  12-19-84\n,
9842	rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
9843# MS-DOS Kermit 2.27 for the IBMPC
9844# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9845# Cannot use line 25, now acts funny like ansi special scrolling region.
9846# Initialization must escape from that region by cursor position to line 24.
9847# Does not use am: because autowrap is lost when kermit dropped and restarted.
9848# Reverse video for standout like H19.
9849# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9850# From: greg small <gts@populi.berkeley.edu> 3-17-85
9851msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
9852	OTbs, am@,
9853	cols#80, it#8, lines#24,
9854	clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9855	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
9856	cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
9857	home=\EH, ht=^I, il1=\EL,
9858	is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
9859	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
9860	rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
9861# MS-DOS Kermit 2.27 with automatic margins
9862# From:	greg small <gts@populi.berkeley.edu> 3-17-85
9863msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
9864	am,
9865	cvvis=\EO\Eq\EG\EvK5,
9866	is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
9867	use=msk227,
9868# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
9869# Automatic margins now default.  Use ansi <sgr> for highlights.
9870# Define function keys.
9871# (msk22714: removed obsolete ":kn#10:" -- esr)
9872# From: greg small <gts@populi.berkeley.edu> 3-17-85
9873msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
9874	am,
9875	bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
9876	is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
9877	kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
9878	kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
9879	sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
9880# This was designed for a VT320 emulator, but it is probably a good start
9881# at support for the VT320 itself.
9882# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
9883# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
9884vt320-k3|MS-Kermit 3.00's vt320 emulation,
9885	am, eslok, hs, km, mir, msgr, xenl,
9886	cols#80, it#8, lines#49, pb#9600, vt#3,
9887	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9888	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
9889	clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
9890	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9891	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9892	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9893	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9894	dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
9895	flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
9896	fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
9897	ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
9898	is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
9899	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
9900	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
9901	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
9902	kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
9903	rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
9904	rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
9905	rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
9906	sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
9907	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9908	tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
9909# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
9910# ACS capabilities from Philippe De Muyter  <phdm@info.ucl.ac.be> 30 May 1996
9911# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
9912vt320-k311|dec vt320 series as defined by kermit 3.11,
9913	am, eslok, hs, mir, msgr, xenl, xon,
9914	cols#80, it#8, lines#24, vt#3,
9915	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9916	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
9917	clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
9918	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9919	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9920	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9921	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9922	dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
9923	flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
9924	ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
9925	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
9926	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9927	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
9928	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
9929	lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
9930	rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
9931	rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
9932	rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
9933	smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
9934	smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
9935
9936######## NON-ANSI TERMINAL EMULATIONS
9937#
9938
9939#### Avatar
9940#
9941# These entries attempt to describe Avatar, a terminal emulation used with
9942# MS-DOS bulletin-board systems.  It was designed to give ANSI-like
9943# capabilities, but with cheaper (shorter) control sequences.  Messy design,
9944# excessively dependent on PC idiosyncracies, but apparently rather popular
9945# in the BBS world.
9946#
9947# No color support.  Avatar doesn't fit either of the Tektronix or HP color
9948# models that terminfo knows about.  An Avatar color attribute is the
9949# low 7 bits of the IBM-PC display-memory attribute.  Bletch.
9950#
9951# I wrote these entries while looking at the Avatar spec.  I don't have
9952# the facilities to test them.  Let me know if they work, or don't.
9953#
9954# Avatar escapes not used by these entries (because maybe you're smarter
9955# and more motivated than I am and can figure out how to wrap terminfo
9956# around some of them, and because they are weird enough to be funny):
9957#				level 0:
9958# ^L		-- clear window/reset current attribute to default
9959# ^V^A%p1%c	-- set current color attribute, parameter decodes as follows:
9960#
9961#      bit:         6   5   4   3   2   1   0
9962#                   |       |   |   |       |
9963#                   +---+---+   |   +---+---+
9964#                       |       |       |
9965#                       |       |  foreground color
9966#                       |  foreground intensity
9967#                  background color
9968#				level 0+:
9969# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c	-- scroll (p2,p3) to (p4,p5) up by p1 lines
9970# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c	-- scroll (p2,p3) to (p4,p5) down by p1 lines
9971# ^V^L%p1%c%p2%c%p3%c		-- clear p2 lines and p3 cols w/attr %p1
9972# ^V^M%p1%c%p2%c%p3%c%p4%c	-- fill p3 lines & p4 cols w/char p2+attr %p1
9973# (^V^L and ^V^M set the current attribute as a side-effect.)
9974# ^V ^Y <a> [...] <c>	-- repeat pattern. <a> specifies the number of bytes
9975#			   in the pattern, <c> the number of times the pattern
9976#		  	   should be repeated. If either value is 0, no-op.
9977#			   The pattern can contain Avatar console codes,
9978#			   including other ^V ^Y patterns.
9979#				level 1:
9980# ^V^O		-- clockwise mode on; turn print direction right each time you
9981#		   hit a window edge (yes, really).  Turned off by CR
9982# ^V^P		-- no-op
9983# ^V^Q%c	-- query the driver
9984# ^V^R		-- driver reset
9985# ^V^S		-- Sound tone (PC-specific)
9986# ^V^T			-- change highlight at current cursor poition to %c
9987# ^V^U%p1%c%p2%c	-- highlight window <a> with attribute <b>
9988# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
9989#			-- define window
9990#
9991# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
9992# (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
9993# tell ncurses that the corresponding highlights exist; it should use <sgr>,
9994# which is the only method that will actually work for multiple highlights.)
9995#
9996# Update by TD - 2004: half of this was inconsistent.  Found documentation
9997# and repaired most of the damage.  sgr0 is probably incorrect, but the
9998# available documentation gives no clues for a workable string.
9999avatar0|avatar terminal emulator level 0,
10000	am, bce, msgr,
10001	cols#80, it#8, lines#25,
10002	blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
10003	cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
10004	ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
10005	rmacs@, rs2=^L,
10006	sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
10007	sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
10008	use=klone+acs,
10009# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10010avatar0+|avatar terminal emulator level 0+,
10011	dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
10012# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10013avatar|avatar1|avatar terminal emulator level 1,
10014	civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
10015	rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
10016
10017#### RBcomm
10018#
10019# RBComm is a lean and mean terminal emulator written by the Interrupt List
10020# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
10021# '90s), especially in the BBS world, and still has some loyal users due to
10022# its very small memory footprint and to a cute macro language.
10023rbcomm|IBM PC with RBcomm and EMACS keybindings,
10024	am, bw, mir, msgr, xenl,
10025	cols#80, it#8, lines#25,
10026	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10027	clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10028	cub1=^H, cud1=^C, cuf1=^B,
10029	cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
10030	dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
10031	il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
10032	is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
10033	kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
10034	rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
10035	rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
10036	rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
10037	smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
10038rbcomm-nam|IBM PC with RBcomm without autowrap,
10039	am@,
10040	bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10041	is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
10042	kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10043rbcomm-w|IBM PC with RBcomm in 132 column mode,
10044	cols#132,
10045	bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10046	is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
10047	kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10048
10049######## LCD DISPLAYS
10050#
10051
10052#### Matrix Orbital
10053# from: Eric Z. Ayers  (eric@ale.org)
10054#
10055# Matrix Orbital 20x4 LCD display
10056# Command Character is 0xFE (decimal 254, octal 376)
10057#
10058# On this device, cursor addressability isn't possible.  The LCD expects:
10059#      0xfe G <col> <row>
10060#      for cup: %p1 == row and %p2 is column
10061#
10062# This line:
10063#	cup=\376G%p2%c%p1%c
10064# LOOKS like it will work, but sometimes only one of the two numbers is sent.
10065# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
10066#
10067# Alas, there is no cursor upline capability on this display.
10068#
10069# These entries add some 'sanity stuff' to the clear function.  That is, it
10070# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
10071# and turns off the cursor blinking and stuff like that.
10072#
10073# NOTE: calling 'beep' turns on the backlight (bell)
10074# NOTE: calling 'flash' turns it on and back off (visual bell)
10075#
10076MtxOrb|Generic Matrix Orbital LCD display,
10077	bel=\376B^A, clear=\376X\376C\376R\376K\376T,
10078	cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
10079	flash=\376B\001$<200>\376F, home=\376H,
10080MtxOrb204|20x4 Matrix Orbital LCD display,
10081	cols#20, lines#4, use=MtxOrb,
10082MtxOrb162|16x2 Matrix Orbital LCD display,
10083	cols#16, lines#2, use=MtxOrb,
10084# The end
10085
10086######## OLDER TERMINAL TYPES
10087#
10088# This section is devoted to older commercial terminal brands that are now
10089# discontinued, but known to be still in use or represented by emulations.
10090#
10091
10092#### AT&T (att, tty)
10093#
10094# This section also includes Teletype-branded VDTs.
10095#
10096# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
10097# Boundless Technologies); for details, see the header comment on the ADDS
10098# section.
10099#
10100# These are AT&T's official terminfo entries.  All-caps aliases have been
10101# removed.
10102#
10103att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
10104	am, eo, mir, msgr, xon,
10105	cols#80, it#8, lines#24,
10106	bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
10107	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10108	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10109	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10110	el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10111	il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
10112	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10113	kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
10114	kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
10115	kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
10116	kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
10117	kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
10118	rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
10119	smso=\E[7m,
10120att2350|AT&T 2350 Video Information Terminal 80 column mode,
10121	mc0@, mc4@, mc5@, use=att2300,
10122
10123# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
10124# Seems upward compatible with vt100, plus ins/del line/char.
10125# On sgr, the protection parameter is ignored.
10126# No check is made to make sure that only 3 parameters are output.
10127# 	standout= reverse + half-intensity = 3 | 5.
10128# 	bold= reverse + underline = 2 | 3.
10129# note that half-bright blinking doesn't look different from normal blinking.
10130# NOTE:you must program the function keys first, label second!
10131# (att4410: a BSD entry has been seen with the following capabilities:
10132# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
10133# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
10134att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
10135	am, hs, mir, msgr, xon,
10136	cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10137	acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10138	bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
10139	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
10140	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
10141	dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
10142	ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
10143	is3=\E[1;03q   f1           \EOP\E[2;03q   f2           \EOQ\E[3;03q   f3           \EOR\E[4;03q   f4           \EOS\E[5;03q   f5           \EOT\E[6;03q   f6           \EOU\E[7;03q   f7           \EOV\E[8;03q   f8           \EOW,
10144	kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10145	kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
10146	kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
10147	ll=\E[24H, nel=^M^J,
10148	pfx=\E[%p1%1d;%p2%l%2.2dq   f%p1%1d           %p2%s,
10149	pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
10150	rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
10151	sc=\E7,
10152	sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10153	sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
10154	tsl=\E7\E[25;%p1%{1}%+%dH,
10155
10156att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
10157	cols#132, wsl#132,
10158	is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
10159
10160att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
10161	OTbs,
10162	pfx=\E[%p1%d;%p2%l%02dq   f%p1%d           %p2%s,
10163	use=att5410v1,
10164
10165att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
10166	cols#132, wsl#132,
10167	is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
10168
10169# 5410 in terms of a vt100
10170# (v5410: added <rmam>/<smam> based on init string -- esr)
10171v5410|att5410 in terms of a vt100,
10172	am, mir, msgr, xon,
10173	cols#80, it#8, lines#24, vt#3,
10174	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10175	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
10176	clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10177	cub1=^H, cud1=^J, cuf1=\E[C$<2>,
10178	cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
10179	dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
10180	enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
10181	il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
10182	kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
10183	rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
10184	rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
10185	sc=\E7,
10186	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
10187	sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
10188	smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
10189	use=vt100+fnkeys,
10190
10191#
10192# Teletype Model 5420 -- A souped up 5410, with multiple windows,
10193# even! the 5420 has three modes: scroll, window or page mode
10194# this terminfo should work in scroll or window mode, but doesn't
10195# take advantage of any of the differences between them.
10196#
10197# Has memory below (2 lines!)
10198# 3 pages of memory (plus some spare)
10199# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
10200# <hpa>, <hts> would work for these, but these work in both scroll and window
10201# mode... Unset insert character so insert mode works
10202# <is1> sets 80 column mode,
10203# <is2> escape sequence:
10204# 1) turn off all fonts
10205# 2) function keys off, keyboard lock off, control display off,
10206#    insert mode off, erasure mode off,
10207# 3) full duplex, monitor mode off, send graphics off, nl on lf off
10208# 4) reset origin mode
10209# 5) set line wraparound
10210# 6) exit erasure mode, positional attribute mode, and erasure extent mode
10211# 7) clear margins
10212# 8) program ENTER to transmit ^J,
10213# We use \212 to program the ^J because a bare ^J will get translated by
10214# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
10215#     1      2            3              4     5     6    7  8
10216# <is3> set screen color to black,
10217# No representation in terminfo for the delete word key: kdw1=\Ed
10218# Key capabilities assume the power-up send sequence...
10219# This <rmcup> is not strictly necessary, but it helps maximize
10220# memory usefulness: <rmcup=\Ez>,
10221# Alternate sgr0:	<sgr0=\E[m\EW^O>,
10222# Alternate sgr:	<sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
10223# smkx programs the SYS PF keys to send a set sequence.
10224# It also sets up labels f1, f2, ..., f8, and sends edit keys.
10225# This string causes them to send the strings <kf1>-<kf8>
10226# when pressed in SYS PF mode.
10227# (att4415: I added <rmam>/<smam> based on the init string -- esr)
10228att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
10229	OTbs, db, mir, xon,
10230	lh#2, lm#78, lw#8, nlab#8, wsl#55,
10231	cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
10232	cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
10233	cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
10234	dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
10235	flash=\E[?5h$<200>\E[?5l, home=\E[x,
10236	hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
10237	il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
10238	is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
10239	is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
10240	kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
10241	kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10242	kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
10243	kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10244	lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
10245	mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
10246	pfx=\E[%p1%d;%p2%l%02dq   F%p1%d           %p2%s,
10247	pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
10248	rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
10249	rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
10250	sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10251	sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
10252	smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
10253	tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
10254	use=att4410,
10255
10256att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
10257	cols#132, lm#54, wsl#97,
10258	is1=\E[?3h$<100>, use=att4415,
10259
10260att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
10261	flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
10262
10263att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
10264	cols#132, lm#54, wsl#97,
10265	flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
10266	use=att4415,
10267
10268# Note that this mode permits programming USER PF KEYS and labels
10269# However, when you program user pf labels you have to reselect
10270# user pf keys to make them appear!
10271att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
10272	kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
10273	pfx=\E[%p1%d;%p2%l%02d;0;1q   F%p1%d           %p2%s,
10274	pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
10275
10276att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
10277	kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10278	use=att4415,
10279
10280att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
10281	kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10282	use=att4415-rv,
10283
10284att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
10285	kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10286	use=att4415-w,
10287
10288att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
10289	kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10290	use=att4415-w-rv,
10291
10292att5420_2|AT&T 5420 model 2 80 cols,
10293	am, db, hs, mir, msgr, xon,
10294	cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
10295	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10296	blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
10297	cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10298	cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
10299	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
10300	cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10301	dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
10302	el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
10303	home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
10304	ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10305	indn=\E[%p1%dE, invis=\E[8m,
10306	is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
10307	kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
10308	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
10309	kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
10310	kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
10311	kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
10312	kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10313	lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
10314	mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
10315	pfx=\E[%p1%d;%p2%l%02dq   F%p1%d           %p2%s\E~,
10316	pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
10317	rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
10318	rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
10319	sc=\E7,
10320	sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10321	sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
10322	smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10323	tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
10324att5420_2-w|AT&T 5420 model 2 in 132 column mode,
10325	cols#132,
10326	is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
10327	use=att5420_2,
10328
10329att4418|att5418|AT&T 5418 80 cols,
10330	am, xon,
10331	cols#80, lines#24,
10332	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10333	bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
10334	cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
10335	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
10336	cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
10337	dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
10338	ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
10339	is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
10340	kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
10341	kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
10342	kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
10343	kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
10344	kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
10345	rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
10346	sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
10347att4418-w|att5418-w|AT&T 5418 132 cols,
10348	cols#132,
10349	is1=\E[?3h, use=att5418,
10350
10351att4420|tty4420|teletype 4420,
10352	OTbs, da, db, eo, msgr, ul, xon,
10353	cols#80, lines#24, lm#72,
10354	bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
10355	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
10356	dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
10357	kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
10358	kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
10359	kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
10360	lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
10361	rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
10362
10363#  The following is a terminfo entry for the Teletype 4424
10364#  asynchronous keyboard-display terminal.  It supports
10365#  the vi editor.  The terminal must be set up as follows,
10366#
10367# 	HIGHLIGHT DEFINITION	3-TONE
10368# 	DISPLAY FUNCTION	GROUP III
10369#
10370#  The second entry below provides limited (a la adm3a)
10371#  operation under GROUP II.
10372#
10373#  This must be used with DISPLAY FUNCTION GROUP I or III
10374# 	and HIGHLIGHT DEFINITION 3-TONE
10375# The terminal has either bold or blink, depending on options
10376#
10377# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
10378att4424|tty4424|teletype 4424,
10379	OTbs, am, xon,
10380	cols#80, lines#24,
10381	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10382	bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
10383	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10384	cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
10385	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
10386	dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
10387	ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
10388	ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
10389	kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10390	kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
10391	khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
10392	rmul=\EZ,
10393	sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
10394	sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
10395	tbc=\EF,
10396
10397att4424-1|tty4424-1|teletype 4424 in display function group I,
10398	kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
10399	use=att4424,
10400
10401# This entry is not one of AT&T's official ones, it was translated from the
10402# 4.4BSD termcap file.  The highlight strings are different from att4424.
10403# I have no idea why this is -- older firmware version, maybe?
10404# The following two lines are the comment originally attached to the entry:
10405# This entry appears to avoid the top line - I have no idea why.
10406# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
10407att4424m|tty4424m|teletype 4424M,
10408	am, da, db, mir,
10409	cols#80, it#8, lines#23,
10410	bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10411	cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
10412	dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
10413	is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
10414	kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
10415	kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
10416	sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10417
10418# The Teletype 5425 is really version 2 of the Teletype 5420. It
10419# is quite similar, except for some minor differences. No page
10420# mode, for example, so all of the <cup> sequences used above have
10421# to change back to what's being used for the 5410. Many of the
10422# option settings have changed their numbering as well.
10423#
10424# This has been tested on a preliminary model.
10425#
10426# (att5425: added <rmam>/<smam> based on the init string -- esr)
10427att5425|tty5425|att4425|AT&T 4425/5425,
10428	am, da, db, hs, mir, msgr, xenl, xon,
10429	cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
10430	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10431	bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10432	clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
10433	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10434	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10435	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10436	cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10437	dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
10438	el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
10439	flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
10440	hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
10441	il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
10442	invis=\E[8m, is1=\E<\E[?3l$<100>,
10443	is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
10444	is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
10445	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10446	kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
10447	kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
10448	kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
10449	kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
10450	nel=^M^J,
10451	pfx=\E[%p1%d;%p2%l%02dq   F%p1%1d           %p2%s,
10452	pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
10453	rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
10454	rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
10455	rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
10456	sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10457	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10458	smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
10459	smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
10460	vpa=\E[%p1%{1}%+%dd,
10461
10462att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
10463	smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
10464
10465att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
10466	cols#132, lm#54, wsl#97,
10467	is1=\E[?3h$<100>, use=tty5425,
10468
10469# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
10470# I also added <rmam>/<smam> -- esr)
10471att4426|tty4426|teletype 4426S,
10472	am, da, db, xon,
10473	cols#80, lines#24, lm#48,
10474	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10475	bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
10476	cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
10477	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10478	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
10479	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
10480	hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
10481	il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
10482	is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
10483	kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
10484	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
10485	kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
10486	nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
10487	rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
10488	rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
10489	smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
10490	vpa=\E[%p1%dd,
10491
10492# Terminfo entry for the AT&T 510 A Personal Terminal
10493# Function keys 9 - 16 are available only after the
10494# screen labeled (soft keys/action blocks) are labeled.  Function key
10495# 9 corresponds to the leftmost touch target on the screen,
10496# function key 16 corresponds to the rightmost.
10497#
10498# This entry is based on one done by Ernie Rice at Summit, NJ and
10499# changed by Anne Gallup, Skokie, IL, ttrdc!anne
10500att510a|bct510a|AT&T 510A Personal Terminal,
10501	am, mir, msgr, xenl, xon,
10502	cols#80, lh#2, lines#24, lw#7, nlab#8,
10503	acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10504	bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10505	civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
10506	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
10507	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10508	cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
10509	dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
10510	el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
10511	hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
10512	is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
10513	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
10514	kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
10515	kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
10516	kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
10517	mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
10518	pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
10519	rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
10520	sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
10521	sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
10522	smul=\E[4m, tbc=\E[3g,
10523
10524# Terminfo entry for the AT&T 510 D Personal Terminal
10525# Function keys 9 through 16 are accessed by bringing up the
10526# system blocks.
10527# Function key 9 corresponds to the leftmost touch target on the screen,
10528# function key 16 corresponds to the rightmost.
10529#
10530# There are problems with soft key labeling.  These are due to
10531# strangenesses in the native terminal that are impossible to
10532# describe in a terminfo.
10533att510d|bct510d|AT&T 510D Personal Terminal,
10534	am, da, db, mir, msgr, xenl, xon,
10535	cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
10536	acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10537	bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10538	clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
10539	cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
10540	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
10541	cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
10542	dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
10543	el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
10544	hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
10545	il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
10546	invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
10547	kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10548	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
10549	kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
10550	kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
10551	kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
10552	mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
10553	pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10554	rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10555	rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
10556	rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
10557	rs2=\E[5;0|, sc=\E7,
10558	sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10559	sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
10560	smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
10561	smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10562
10563# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
10564att500|att513|AT&T 513 using page mode,
10565	am, chts, mir, msgr, xenl, xon,
10566	cols#80, lh#2, lines#24, lw#8, nlab#8,
10567	acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10568	bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10569	clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
10570	csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10571	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10572	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10573	cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
10574	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10575	enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
10576	hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10577	indn=\E[%p1%dE, invis=\E[8m,
10578	is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
10579	kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10580	kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10581	kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
10582	kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
10583	kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
10584	kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
10585	kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
10586	kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10587	kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
10588	kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10589	kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
10590	khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
10591	kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10592	kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10593	kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
10594	ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
10595	mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
10596	nel=\EE,
10597	pfkey=\E[%p1%d;%p2%l%d;3;0p   F%p1%d           %p2%s,
10598	pfloc=\E[%p1%d;%p2%l%d;2;0p   F%p1%d           %p2%s,
10599	pfx=\E[%p1%d;%p2%l%d;1;0p   F%p1%d           %p2%s,
10600	pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10601	rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10602	rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
10603	rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
10604	rmul=\E[m,
10605	rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
10606	rs2=\E[5;0|, sc=\E7,
10607	sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10608	sgr0=\E[m\017, smacs=^N, smir=\E[4h,
10609	smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
10610	smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10611
10612# 01-07-88
10613# printer must be set to EMUL ANSI to accept ESC codes
10614# <cuu1> stops at top margin
10615# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
10616#	and alt font ascii,wrap on,tabs cleared
10617# <is2> disables newline on LF,Emphasized off
10618# The <u0> capability sets form length
10619att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
10620	xhpa, xvpa,
10621	bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
10622	orhi#100, orl#12, orvi#72,
10623	cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
10624	cr=^M,
10625	csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
10626	cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
10627	ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
10628	lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
10629	rshm=\E[m,
10630	scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
10631	smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
10632	smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
10633	u0=\E[%p1%dt, vpa=\E[%p1%dd,
10634
10635# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
10636# The following SET-UP modes are assumed for normal operation:
10637#	CR_DEF=CR	NL_DEF=INDEX	DUPLEX=FULL
10638# Other SET-UP modes may be set for operator convenience or communication
10639# requirements.  This termcap description is for the Resident Terminal Mode.
10640# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10641# The BRL entry also said: UNSAFE :ll=\E[70H:
10642att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
10643	am, xon,
10644	cols#88, it#8, lines#70, vt#3,
10645	bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10646	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10647	dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10648	home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
10649	il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
10650	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10651	kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
10652	rs1=\Ec, sc=\E7,
10653
10654# 5620 terminfo  (2.0 or later ROMS with char attributes)
10655# The following SET-UP modes are assumed for normal operation:
10656#	DUPLEX=FULL	GEN_FLOW=ON	NEWLINE=INDEX	RETURN=CR
10657# Other SET-UP modes may be set for operator convenience or communication
10658# requirements.  This termcap description is for Resident Terminal Mode.  No
10659# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10660# assumptions: <ind> (scroll forward one line) is only done at screen bottom
10661# Be aware that older versions of the dmd have a firmware bug that affects
10662# parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
10663# <msgr> is from an otherwise inferior BRL for this terminal.  That entry
10664# also has <ll>=\E[70H commented out and marked unsafe.
10665# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
10666att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
10667	OTbs, am, msgr, npc, xon,
10668	cols#88, it#8, lines#70,
10669	bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
10670	cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10671	dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
10672	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10673	ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
10674	indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10675	kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
10676	pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
10677	rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
10678	sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
10679att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
10680	lines#24, use=att5620,
10681att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
10682	lines#34, use=att5620,
10683# 5620 layer running the "S" system's downloaded graphics handler:
10684att5620-s|tty5620-s|layer|vitty|5620 S layer,
10685	OTbs, OTpt, am,
10686	cols#80, it#8, lines#72,
10687	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
10688	cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
10689	el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
10690	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10691	kll=\E[70;1H,
10692
10693# Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
10694#
10695# Entries for <kf29> thru <kf46> refer to the alternate keypad mode
10696# keys:  = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
10697att605|AT&T 605 80 column 102key keyboard,
10698	am, eo, xon,
10699	cols#80, lines#24, lw#8, nlab#8, wsl#80,
10700	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10701	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
10702	cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
10703	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10704	dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10705	el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10706	il1=\E[L, ind=^J, invis=\E[8m,
10707	is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
10708	kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
10709	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10710	kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
10711	kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
10712	kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
10713	kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
10714	kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
10715	kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
10716	kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
10717	kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
10718	kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
10719	kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
10720	kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
10721	mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10722	pfx=\E[%p1%d;%p2%l%02dq   F%p1%1d           %p2%s,
10723	pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10724	rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10725	rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
10726	smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10727	tsl=\E7\E[25;%i%p1%dx,
10728att605-pc|ATT 605 in pc term mode,
10729	acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
10730	cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
10731	dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
10732	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10733	kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
10734	kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
10735	kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
10736	rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
10737	xonc=e, use=att605,
10738att605-w|AT&T 605-w 132 column 102 key keyboard,
10739	cols#132, wsl#132,
10740	is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
10741	use=att605,
10742# (att610: I added <rmam>/<smam> based on the init string.  I also
10743# added <indn> and <rin> because the BSD file says the att615s have them,
10744# and the 615 is like a 610 with a big keyboard, and most of their other
10745# smart terminals support the same sequence -- esr)
10746att610|AT&T 610; 80 column; 98key keyboard,
10747	am, eslok, hs, mir, msgr, xenl, xon,
10748	cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10749	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10750	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10751	clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10752	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10753	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10754	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10755	cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10756	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10757	flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10758	ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10759	indn=\E[%p1%dS, invis=\E[8m,
10760	is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
10761	is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
10762	kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10763	kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10764	kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10765	kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10766	kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
10767	nel=\EE,
10768	pfx=\E[%p1%d;%p2%l%02dq   F%p1%1d           %p2%s,
10769	pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10770	ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
10771	rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
10772	sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10773	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10774	smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
10775att610-w|AT&T 610; 132 column; 98key keyboard,
10776	cols#132, wsl#132,
10777	is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10778	use=att610,
10779
10780att610-103k|AT&T 610; 80 column; 103key keyboard,
10781	kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10782	kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10783	kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10784	kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10785	kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10786	kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10787	kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10788	kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
10789	khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
10790	knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
10791	kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
10792	krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
10793	kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
10794att610-103k-w|AT&T 610; 132 column; 103key keyboard,
10795	cols#132, wsl#132,
10796	is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10797	use=att610-103k,
10798att615|AT&T 615; 80 column; 98key keyboard,
10799	kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10800	kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10801	kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10802	kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10803	kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10804	kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10805	kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
10806att615-w|AT&T 615; 132 column; 98key keyboard,
10807	kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10808	kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10809	kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10810	kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10811	kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10812	kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10813	kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
10814att615-103k|AT&T 615; 80 column; 103key keyboard,
10815	kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
10816att615-103k-w|AT&T 615; 132 column; 103key keyboard,
10817	kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
10818# (att620: I added <rmam>/<smam> based on the init string and
10819# <rin>/<indn> from a BSD termcap -- esr)
10820att620|AT&T 620; 80 column; 98key keyboard,
10821	am, eslok, hs, mir, msgr, xenl, xon,
10822	cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10823	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10824	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10825	clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10826	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10827	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10828	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10829	cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10830	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10831	flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10832	ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10833	indn=\E[%p1%dS, invis=\E[8m,
10834	is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
10835	is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
10836	kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10837	kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10838	kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10839	kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
10840	kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
10841	kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
10842	kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
10843	kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
10844	kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
10845	kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10846	kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
10847	mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10848	pfx=\E[%p1%d;%p2%l%02dq   F%p1%1d           %p2%s,
10849	pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10850	ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
10851	rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10852	rs2=\Ec\E[?3l, sc=\E7,
10853	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10854	sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
10855	smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10856	tsl=\E7\E[25;%i%p1%dx,
10857att620-w|AT&T 620; 132 column; 98key keyboard,
10858	cols#132, wsl#132,
10859	is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10860	use=att620,
10861att620-103k|AT&T 620; 80 column; 103key keyboard,
10862	kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10863	kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10864	kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10865	kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10866	kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10867	kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10868	kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10869	kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
10870	kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
10871	kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
10872	kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
10873	kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
10874	kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10875	kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10876	kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
10877	ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
10878
10879att620-103k-w|AT&T 620; 132 column; 103key keyboard,
10880	cols#132, wsl#132,
10881	is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10882	use=att620-103k,
10883
10884# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
10885# The following SETUP modes are assumed for normal operation:
10886#	Local_Echo=Off	Gen_Flow=On	Return=CR	Received_Newline=LF
10887#	Font_Size=Large		Non-Layers_Window_Cols=80
10888#				Non-Layers_Window_Rows=60
10889# Other SETUP modes may be set for operator convenience or communication
10890# requirements.  Some capabilities assume a printer attached to the Aux EIA
10891# port.  This termcap description is for the Fixed Non-Layers Window.  No
10892# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10893# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
10894att630|AT&T 630 windowing terminal,
10895	OTbs, am, da, db, mir, msgr, npc, xon,
10896	cols#80, it#8, lines#60, lm#0,
10897	bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
10898	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
10899	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10900	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
10901	dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10902	el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10903	il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
10904	kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10905	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
10906	kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
10907	kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
10908	kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
10909	kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
10910	mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
10911	rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
10912	rmul=\E[m, rs2=\Ec, sc=\E7,
10913	sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
10914	sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
10915att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
10916	lines#24, use=att630,
10917
10918# This is the att700 entry for 700 native emulation of the AT&T 700
10919# terminal.  Comments are relative to changes from the 605V2 entry and
10920# att730 on which the entry is based.  Comments show the terminfo
10921# capability name, termcap name, and description.
10922#
10923# Here is what's going onm in the init string:
10924#	ESC [ 50;4|	set 700 native mode (really is 605)
10925# x	ESC [ 56;ps| 	set lines to 24: ps=0; 40: ps=1 (plus status line)
10926#	ESC [ 53;0|	set GenFlow to Xon/Xoff
10927#	ESC [ 8 ;0|	set CR on NL
10928# x	ESC [ ? 3 l/h	set workspace: 80 col(l); 132 col(h)
10929#	ESC [ ? 4 l	jump scroll
10930#	ESC [ ? 5 l/h	video: normal (l); reverse (h)
10931#	ESC [ ?13 l	Labels on
10932#	ESC [ ?15 l	parity check = no
10933#	ESC [ 13 l	monitor mode off
10934#	ESC [ 20 l	LF on NL (not CRLF on NL)
10935#	ESC [ ? 7 h	autowrap on
10936#	ESC [ 12 h	local echo off
10937#	ESC ( B		GO = ASCII
10938#	ESC ) 0		G1 = Special Char & Line Drawing
10939#	ESC [ ? 31 l	Set 7 bit controls
10940#
10941# Note: Most terminals, especially the 600 family use Reverse Video for
10942# standout mode.  DEC also uses reverse video.  The VT100 uses bold in addition
10943# Assume we should stay with reverse video for 70..  However, the 605V2 exits
10944# standout mode with \E[m (all normal attributes).  The 730 entry simply
10945# exits reverse video which would leave other current attributes intact.  It
10946# was assumed the 730 entry to be more correct so rmso has changed.  The
10947# 605V2 has no sequences to turn individual attributes off, thus its setting
10948# and the rmso/smso settings from the 730.
10949#
10950# Note: For the same reason as above in rmso I changed exit under-score mode
10951# to specifically turn off underscore, rather than return to all normal
10952# attributes
10953#
10954# Note: The following pkey_xmit is taken from the 605V2 which contained the
10955# capability as pfxl.  It was changed here to pfx since pfxl
10956# will only compile successfully with Unix 4.0 tic.  Also note that pfx only
10957# allows strings to be parameters and label values must be programmed as
10958# constant strings.  Supposedly the pfxl of Version 4.0 allows both labels
10959# and strings to be parameters.  The 605V2 pfx entry should be examined later
10960# in this regard. For reference the 730 pfxl entry is shown here for comparison
10961# 730 pfx entry:
10962#     pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
10963# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
10964#
10965# (for 4.0 tic)
10966#     pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t   F%p1%1d           %;%p2%s,
10967#
10968# (for <4.0 tic)
10969#     pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t   F%p1%1d           %;%p2%s,
10970#
10971# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
10972#
10973# Port1 Interface
10974#
10975# modular 10 pin Connector
10976# Left side       Right side
10977# Pin 1 2 3 4 5 6 7 8 9 10
10978#
10979#        Key (notch) at bottom
10980#
10981# Pin    1 DSR
10982#        3 DCD
10983#        4 DTR
10984#        5 Sig Ground
10985#        6 RD
10986#        7 SD
10987#        8 CTS
10988#        9 RTS
10989#        10 Frame Ground
10990#
10991# The manual is 189 pages and is loaded with details about the escape codes,
10992# etc..... Available from AT&T CIC 800-432-6600...
10993# ask for Document number 999-300-660..
10994#
10995att700|AT&T 700 24x80 column display w/102key keyboard,
10996	am, eslok, hs, mir, msgr, xenl, xon,
10997	cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10998	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10999	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11000	clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11001	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11002	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11003	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11004	cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11005	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11006	enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
11007	fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
11008	il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
11009	is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
11010	is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
11011	kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11012	kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
11013	kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
11014	kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
11015	kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
11016	kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
11017	kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
11018	kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
11019	kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
11020	kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
11021	kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11022	kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
11023	mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11024	pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t   F%p1%1d           %;%p2%s,
11025	pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11026	rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11027	rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
11028	rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
11029	sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11030	sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
11031	smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
11032	tsl=\E7\E[99;%i%p1%dx,
11033
11034# This entry was modified 3/13/90 by JWE.
11035# fixes include additions of <enacs>, correcting <rep>, and modification
11036# of <kHOM>.  (See comments below)
11037# att730 has status line of 80 chars
11038# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
11039# the <kf25> and up keys are used for shifted system Fkeys
11040# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
11041# currently the same as <khome> (unshifted HOME or \E[H).  On the 102, 102+1
11042# and 122 key keyboards, the 730's translation is \E[2J.  For consistency
11043# <kHOM> has been commented out.  The user can uncomment <kHOM> if using the
11044# 102, 102+1, or 122 key keyboards
11045#       kHOM=\E[2J,
11046# (att730: I added <rmam>/<smam> based on the init string -- esr)
11047att730|AT&T 730 windowing terminal,
11048	am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
11049	cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
11050	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11051	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11052	clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11053	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11054	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11055	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11056	cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11057	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11058	enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
11059	home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
11060	ind=\ED, invis=\E[8m,
11061	is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
11062	is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
11063	kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11064	kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
11065	kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
11066	kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
11067	kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
11068	kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
11069	kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
11070	kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
11071	kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
11072	kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
11073	kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11074	kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
11075	mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11076	pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq   SYS     F%p1%:-2d  %e;0;3q%;%p2%s,
11077	pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
11078	pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11079	rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11080	rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
11081	rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
11082	sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11083	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11084	smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
11085	swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
11086att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
<