1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 /*	Copyright (c) 1983-1989 AT&T	*/
28 /*	  All Rights Reserved  	*/
29 
30 /*
31  * Portions of this source code were derived from Berkeley 4.3 BSD
32  * under license from the Regents of the University of California.
33  */
34 
35 #pragma ident	"%Z%%M%	%I%	%E% SMI"
36 
37 #define	_FILE_OFFSET_BITS 64
38 
39 /*
40  * remote shell server:
41  *	remuser\0
42  *	locuser\0
43  *	command\0
44  *	data
45  */
46 #include <sys/types.h>
47 #include <sys/ioctl.h>
48 #include <sys/telioctl.h>
49 #include <sys/param.h>
50 #include <sys/socket.h>
51 #include <sys/time.h>
52 #include <sys/stat.h>
53 #include <sys/file.h>
54 #include <sys/select.h>
55 
56 #include <netinet/in.h>
57 
58 #include <arpa/inet.h>
59 
60 #include <unistd.h>
61 #include <string.h>
62 #include <stdio.h>
63 #include <stdarg.h>
64 #include <errno.h>
65 #include <pwd.h>
66 #include <grp.h>
67 #include <signal.h>
68 #include <netdb.h>
69 #include <syslog.h>
70 #include <fcntl.h>
71 #include <ctype.h>
72 #include <locale.h>
73 
74 #include <sys/resource.h>
75 #include <sys/filio.h>
76 #include <shadow.h>
77 #include <stdlib.h>
78 
79 #include <security/pam_appl.h>
80 
81 #include <k5-int.h>
82 #include <krb5_repository.h>
83 #include <com_err.h>
84 #include <kcmd.h>
85 
86 #include <addr_match.h>
87 #include <store_forw_creds.h>
88 
89 #ifndef NCARGS
90 #define	NCARGS	5120
91 #endif /* !NCARGS */
92 
93 static void error(char *, ...);
94 static void doit(int, struct sockaddr_storage *, char **);
95 static void getstr(int, char *, int, char *);
96 
97 static int legalenvvar(char *);
98 static void add_to_envinit(char *);
99 static int locale_envmatch(char *, char *);
100 
101 /* Function decls. for functions not in any header file.  (Grrrr.) */
102 extern int audit_rshd_setup(void);
103 extern int audit_rshd_success(char *, char *, char *, char *);
104 extern int audit_rshd_fail(char *, char *, char *, char *, char *);
105 extern int audit_settid(int);
106 
107 static int do_encrypt = 0;
108 static pam_handle_t *pamh;
109 
110 /*
111  * This is the shell/kshell daemon. The very basic protocol for checking
112  * authentication and authorization is:
113  * 1) Check authentication.
114  * 2) Check authorization via the access-control files:
115  *    ~/.k5login (using krb5_kuserok) and/or
116  * Execute command if configured authoriztion checks pass, else deny
117  * permission.
118  *
119  * The configuration is done either by command-line arguments passed by inetd,
120  * or by the name of the daemon. If command-line arguments are present, they
121  * take priority. The options are:
122  * -k allow kerberos authentication (krb5 only; krb4 support is not provided)
123  * -5 same as `-k', mainly for compatability with MIT
124  * -e allow encrypted session
125  * -c demand authenticator checksum
126  * -i ignore authenticator checksum
127  * -U Refuse connections that cannot be mapped to a name via `gethostbyname'
128  * -s <tos>	Set the IP TOS option
129  * -S <keytab>	Set the keytab file to use
130  * -M <realm>	Set the Kerberos realm to use
131  */
132 
133 #define	ARGSTR	"ek5ciUD:M:S:L:?:"
134 #define	RSHD_BUFSIZ	(50 * 1024)
135 
136 static krb5_context bsd_context;
137 static krb5_keytab keytab = NULL;
138 static krb5_ccache ccache = NULL;
139 static krb5_keyblock *sessionkey = NULL;
140 
141 static int require_encrypt = 0;
142 static int resolve_hostname = 0;
143 static int krb5auth_flag = 0;	/* Flag set, when KERBEROS is enabled */
144 static enum kcmd_proto kcmd_protocol;
145 
146 #ifdef DEBUG
147 static int debug_port = 0;
148 #endif /* DEBUG */
149 
150 /*
151  * There are two authentication related masks:
152  * auth_ok and auth_sent.
153  * The auth_ok mask is the or'ing of authentication
154  * systems any one of which can be used.
155  * The auth_sent mask is the or'ing of one or more authentication/authorization
156  * systems that succeeded.  If the and'ing
157  * of these two masks is true, then authorization is successful.
158  */
159 
160 #define	AUTH_KRB5	(0x2)
161 static int auth_ok = 0;
162 static int auth_sent = 0;
163 static int checksum_required = 0;
164 static int checksum_ignored = 0;
165 
166 /*
167  * Leave room for 4 environment variables to be passed.
168  * The "-L env_var" option has been added primarily to
169  * maintain compatability with MIT.
170  */
171 #define	MAXENV	4
172 static char *save_env[MAXENV];
173 static int num_env = 0;
174 
175 static void usage(void);
176 static krb5_error_code recvauth(int, int *);
177 
178 /*ARGSUSED*/
179 int
180 main(int argc, char **argv, char **renvp)
181 {
182 	struct linger linger;
183 	int on = 1, fromlen;
184 	struct sockaddr_storage from;
185 	int fd = 0;
186 
187 	extern int opterr, optind;
188 	extern char *optarg;
189 	int ch;
190 	int tos = -1;
191 	krb5_error_code status;
192 
193 	openlog("rsh", LOG_PID | LOG_ODELAY, LOG_DAEMON);
194 	(void) audit_rshd_setup();	/* BSM */
195 	fromlen = sizeof (from);
196 
197 	(void) setlocale(LC_ALL, "");
198 
199 	/*
200 	 * Analyze parameters.
201 	 */
202 	opterr = 0;
203 	while ((ch = getopt(argc, argv, ARGSTR)) != EOF)
204 		switch (ch) {
205 		case '5':
206 		case 'k':
207 			auth_ok |= AUTH_KRB5;
208 			krb5auth_flag++;
209 			break;
210 
211 		case 'c':
212 			checksum_required = 1;
213 			krb5auth_flag++;
214 			break;
215 		case 'i':
216 			checksum_ignored = 1;
217 			krb5auth_flag++;
218 			break;
219 
220 		case 'e':
221 			require_encrypt = 1;
222 			krb5auth_flag++;
223 			break;
224 #ifdef DEBUG
225 		case 'D':
226 			debug_port = atoi(optarg);
227 			break;
228 #endif /* DEBUG */
229 		case 'U':
230 			resolve_hostname = 1;
231 			break;
232 
233 		case 'M':
234 			krb5_set_default_realm(bsd_context, optarg);
235 			krb5auth_flag++;
236 			break;
237 
238 		case 'S':
239 			if ((status = krb5_kt_resolve(bsd_context, optarg,
240 				&keytab))) {
241 				com_err("rsh", status,
242 					gettext("while resolving "
243 						"srvtab file %s"), optarg);
244 				exit(2);
245 			}
246 			krb5auth_flag++;
247 			break;
248 
249 		case 's':
250 			if (optarg == NULL || ((tos = atoi(optarg)) < 0) ||
251 				(tos > 255)) {
252 				syslog(LOG_ERR, "rshd: illegal tos value: "
253 				    "%s\n", optarg);
254 			}
255 			break;
256 
257 		case 'L':
258 			if (num_env < MAXENV) {
259 				save_env[num_env] = strdup(optarg);
260 				if (!save_env[num_env++]) {
261 					com_err("rsh", ENOMEM,
262 						gettext("in saving env"));
263 					exit(2);
264 				}
265 			} else {
266 				(void) fprintf(stderr, gettext("rshd: Only %d"
267 						" -L arguments allowed\n"),
268 						MAXENV);
269 				exit(2);
270 			}
271 			break;
272 
273 		case '?':
274 		default:
275 			usage();
276 			exit(1);
277 			break;
278 		}
279 
280 	if (optind == 0) {
281 		usage();
282 		exit(1);
283 	}
284 	argc -= optind;
285 	argv += optind;
286 
287 	if (krb5auth_flag > 0) {
288 		status = krb5_init_context(&bsd_context);
289 		if (status) {
290 			syslog(LOG_ERR, "Error initializing krb5: %s",
291 			    error_message(status));
292 			exit(1);
293 		}
294 	}
295 
296 	if (!checksum_required && !checksum_ignored)
297 		checksum_ignored = 1;
298 
299 	if (checksum_required && checksum_ignored) {
300 		syslog(LOG_CRIT, gettext("Checksums are required and ignored."
301 		"These options are mutually exclusive"
302 		"--check the documentation."));
303 		error("Configuration error: mutually exclusive "
304 				"options specified.\n");
305 		exit(1);
306 	}
307 
308 #ifdef DEBUG
309 	if (debug_port) {
310 		int s;
311 		struct sockaddr_in sin;
312 
313 		if ((s = socket(AF_INET, SOCK_STREAM, PF_UNSPEC)) < 0) {
314 			fprintf(stderr, gettext("Error in socket: %s\n"),
315 					strerror(errno));
316 			exit(2);
317 		}
318 		(void) memset((char *)&sin, 0, sizeof (sin));
319 		sin.sin_family = AF_INET;
320 		sin.sin_port = htons(debug_port);
321 		sin.sin_addr.s_addr = INADDR_ANY;
322 
323 		(void) setsockopt(s, SOL_SOCKET, SO_REUSEADDR,
324 			(char *)&on, sizeof (on));
325 
326 		if ((bind(s, (struct sockaddr *)&sin, sizeof (sin))) < 0) {
327 			(void) fprintf(stderr, gettext("Error in bind: %s\n"),
328 					strerror(errno));
329 			exit(2);
330 		}
331 		if ((listen(s, 5)) < 0) {
332 			(void) fprintf(stderr, gettext("Error in listen: %s\n"),
333 					strerror(errno));
334 			exit(2);
335 		}
336 		if ((fd = accept(s, (struct sockaddr *)&from,
337 					&fromlen)) < 0) {
338 			(void) fprintf(stderr, gettext("Error in accept: %s\n"),
339 					strerror(errno));
340 			exit(2);
341 		}
342 		(void) close(s);
343 	}
344 	else
345 #endif /* DEBUG */
346 	{
347 		if (getpeername(STDIN_FILENO, (struct sockaddr *)&from,
348 				(socklen_t *)&fromlen) < 0) {
349 			(void) fprintf(stderr, "rshd: ");
350 			perror("getpeername");
351 			_exit(1);
352 		}
353 		fd = STDIN_FILENO;
354 	}
355 
356 	if (audit_settid(fd) != 0) {
357 		perror("settid");
358 		exit(1);
359 	}
360 
361 	if (setsockopt(fd, SOL_SOCKET, SO_KEEPALIVE, (char *)&on,
362 	    sizeof (on)) < 0)
363 		syslog(LOG_WARNING, "setsockopt (SO_KEEPALIVE): %m");
364 	linger.l_onoff = 1;
365 	linger.l_linger = 60;			/* XXX */
366 	if (setsockopt(fd, SOL_SOCKET, SO_LINGER, (char *)&linger,
367 	    sizeof (linger)) < 0)
368 		syslog(LOG_WARNING, "setsockopt (SO_LINGER): %m");
369 
370 	if ((tos != -1) && (setsockopt(fd, IPPROTO_IP, IP_TOS, (char *)&tos,
371 				sizeof (tos)) < 0) &&
372 				(errno != ENOPROTOOPT)) {
373 		syslog(LOG_ERR, "setsockopt (IP_TOS %d): %m");
374 	}
375 
376 	doit(dup(fd), &from, renvp);
377 	return (0);
378 }
379 
380 /*
381  * locale environments to be passed to shells.
382  */
383 static char *localeenv[] = {
384 	"LANG",
385 	"LC_CTYPE", "LC_NUMERIC", "LC_TIME", "LC_COLLATE",
386 	"LC_MONETARY", "LC_MESSAGES", "LC_ALL", NULL};
387 
388 /*
389  * The following is for the environment variable list
390  * used in the call to execle().  envinit is declared here,
391  * but populated after the call to getpwnam().
392  */
393 static char	*homedir;	/* "HOME=" */
394 static char	*shell;		/* "SHELL=" */
395 static char	*username;	/* "USER=" */
396 static char	*tz;		/* "TZ=" */
397 
398 static char	homestr[] = "HOME=";
399 static char	shellstr[] = "SHELL=";
400 static char	userstr[] = "USER=";
401 static char	tzstr[] = "TZ=";
402 
403 static char	**envinit;
404 #define	PAM_ENV_ELIM	16	/* allow 16 PAM environment variables */
405 #define	USERNAME_LEN	16	/* maximum number of characters in user name */
406 
407 /*
408  *	See PSARC opinion 1992/025
409  */
410 static char	userpath[] = "PATH=/usr/bin:";
411 static char	rootpath[] = "PATH=/usr/sbin:/usr/bin";
412 
413 static char cmdbuf[NCARGS+1];
414 static char hostname [MAXHOSTNAMELEN + 1];
415 static char locuser[USERNAME_LEN + 1];
416 static char remuser[USERNAME_LEN + 1];
417 
418 #define	KRB5_RECVAUTH_V5	5
419 #define	SIZEOF_INADDR sizeof	(struct in_addr)
420 
421 #define	MAX_REPOSITORY_LEN	255
422 static char repository[MAX_REPOSITORY_LEN];
423 
424 static char *kremuser;
425 static krb5_principal client = NULL;
426 
427 static char	remote_addr[64];
428 static char	local_addr[64];
429 
430 static void
431 doit(int f, struct sockaddr_storage *fromp, char **renvp)
432 {
433 	char *cp;
434 
435 	struct passwd *pwd;
436 	char *path;
437 	char *tzenv;
438 	struct spwd *shpwd;
439 	struct stat statb;
440 	char **lenvp;
441 
442 	krb5_error_code status;
443 	int valid_checksum;
444 	int cnt;
445 	int sin_len;
446 	struct sockaddr_in localaddr;
447 
448 	int s;
449 	in_port_t port;
450 	pid_t pid;
451 	int pv[2], pw[2], px[2], cc;
452 	char buf[RSHD_BUFSIZ];
453 	char sig;
454 	int one = 1;
455 	int v = 0;
456 	int err = 0;
457 	int idx = 0;
458 	char **pam_env;
459 	char abuf[INET6_ADDRSTRLEN];
460 	struct sockaddr_in *sin;
461 	struct sockaddr_in6 *sin6;
462 	int fromplen;
463 	int homedir_len, shell_len, username_len, tz_len;
464 	int no_name;
465 	boolean_t bad_port;
466 	int netf = 0;
467 
468 	(void) signal(SIGINT, SIG_DFL);
469 	(void) signal(SIGQUIT, SIG_DFL);
470 	(void) signal(SIGTERM, SIG_DFL);
471 	(void) signal(SIGXCPU, SIG_DFL);
472 	(void) signal(SIGXFSZ, SIG_DFL);
473 	(void) sigset(SIGCHLD, SIG_IGN);
474 	(void) signal(SIGPIPE, SIG_DFL);
475 	(void) signal(SIGHUP, SIG_DFL);
476 
477 #ifdef DEBUG
478 	{ int t = open("/dev/tty", 2);
479 	    if (t >= 0) {
480 		(void) setsid();
481 		(void) close(t);
482 	    }
483 	}
484 #endif
485 	if (fromp->ss_family == AF_INET) {
486 		sin = (struct sockaddr_in *)fromp;
487 		port = ntohs((ushort_t)sin->sin_port);
488 		fromplen = sizeof (struct sockaddr_in);
489 	} else if (fromp->ss_family == AF_INET6) {
490 		sin6 = (struct sockaddr_in6 *)fromp;
491 		port = ntohs((ushort_t)sin6->sin6_port);
492 		fromplen = sizeof (struct sockaddr_in6);
493 	} else {
494 		syslog(LOG_ERR, "wrong address family\n");
495 		exit(1);
496 	}
497 
498 	if (fromp->ss_family == AF_INET6) {
499 		if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
500 			struct in_addr ipv4_addr;
501 
502 			IN6_V4MAPPED_TO_INADDR(&sin6->sin6_addr, &ipv4_addr);
503 			(void) inet_ntop(AF_INET, &ipv4_addr, abuf,
504 			    sizeof (abuf));
505 		} else {
506 			(void) inet_ntop(AF_INET6, &sin6->sin6_addr, abuf,
507 			    sizeof (abuf));
508 		}
509 	} else if (fromp->ss_family == AF_INET) {
510 		(void) inet_ntop(AF_INET, &sin->sin_addr, abuf, sizeof (abuf));
511 	}
512 
513 	sin_len = sizeof (struct sockaddr_in);
514 	if (getsockname(f, (struct sockaddr *)&localaddr, &sin_len) < 0) {
515 		perror("getsockname");
516 		exit(1);
517 	}
518 
519 	netf = f;
520 
521 	bad_port = (port >= IPPORT_RESERVED ||
522 		port < (uint_t)(IPPORT_RESERVED/2));
523 
524 	/* Get the name of the client side host to use later */
525 	no_name = (getnameinfo((const struct sockaddr *) fromp, fromplen,
526 		hostname, sizeof (hostname), NULL, 0, 0) != 0);
527 
528 	if (bad_port || no_name != 0) {
529 		/*
530 		 * If there is no host name available then use the
531 		 * IP address to identify the host in the PAM call
532 		 * below.  Do the same if a bad port was used, to
533 		 * prevent untrustworthy authentication.
534 		 */
535 		(void) strlcpy(hostname, abuf, sizeof (hostname));
536 	}
537 
538 	if (no_name != 0) {
539 		/*
540 		 * If the '-U' option was given on the cmd line,
541 		 * we must be able to lookup the hostname
542 		 */
543 		if (resolve_hostname) {
544 			syslog(LOG_ERR, "rshd: Couldn't resolve your "
545 			    "address into a host name.\r\n Please "
546 			    "contact your net administrator");
547 			exit(1);
548 		}
549 	} else {
550 		/*
551 		 * Even if getnameinfo() succeeded, we still have to check
552 		 * for spoofing.
553 		 */
554 		check_address("rshd", fromp, sin, sin6, abuf, hostname,
555 		    sizeof (hostname));
556 	}
557 
558 	if (!krb5auth_flag && bad_port) {
559 		if (no_name)
560 			syslog(LOG_NOTICE, "connection from %s - "
561 			    "bad port\n", abuf);
562 		else
563 			syslog(LOG_NOTICE, "connection from %s (%s) - "
564 			    "bad port\n", hostname, abuf);
565 		exit(1);
566 	}
567 
568 	(void) alarm(60);
569 	port = 0;
570 	for (;;) {
571 		char c;
572 		if ((cc = read(f, &c, 1)) != 1) {
573 			if (cc < 0)
574 				syslog(LOG_NOTICE, "read: %m");
575 			(void) shutdown(f, 1+1);
576 			exit(1);
577 		}
578 		if (c == 0)
579 			break;
580 		port = port * 10 + c - '0';
581 	}
582 	(void) alarm(0);
583 	if (port != 0) {
584 		int lport = 0;
585 		struct sockaddr_storage ctl_addr;
586 		int addrlen;
587 
588 		(void) memset(&ctl_addr, 0, sizeof (ctl_addr));
589 		addrlen = sizeof (ctl_addr);
590 		if (getsockname(f, (struct sockaddr *)&ctl_addr,
591 			&addrlen) < 0) {
592 			syslog(LOG_ERR, "getsockname: %m");
593 			exit(1);
594 		}
595 get_port:
596 		/*
597 		 * 0 means that rresvport_addr() will bind to a port in
598 		 * the anonymous priviledged port range.
599 		 */
600 		if (krb5auth_flag) {
601 			/*
602 			 * Kerberos does not support IPv6 yet.
603 			 */
604 			lport = IPPORT_RESERVED - 1;
605 		}
606 		s = rresvport_addr(&lport, &ctl_addr);
607 
608 		if (s < 0) {
609 			syslog(LOG_ERR, "can't get stderr port: %m");
610 			exit(1);
611 		}
612 		if (!krb5auth_flag && (port >= IPPORT_RESERVED)) {
613 			syslog(LOG_ERR, "2nd port not reserved\n");
614 			exit(1);
615 		}
616 		if (fromp->ss_family == AF_INET) {
617 			sin->sin_port = htons((ushort_t)port);
618 		} else if (fromp->ss_family == AF_INET6) {
619 			sin6->sin6_port = htons((ushort_t)port);
620 		}
621 		if (connect(s, (struct sockaddr *)fromp, fromplen) < 0) {
622 			if (errno == EADDRINUSE) {
623 				(void) close(s);
624 				goto get_port;
625 			}
626 			syslog(LOG_INFO, "connect second port: %m");
627 			exit(1);
628 		}
629 	}
630 	(void) dup2(f, 0);
631 	(void) dup2(f, 1);
632 	(void) dup2(f, 2);
633 
634 #ifdef DEBUG
635 	syslog(LOG_NOTICE, "rshd: Client hostname = %s", hostname);
636 	if (debug_port)
637 		syslog(LOG_NOTICE, "rshd: Debug port is %d", debug_port);
638 	if (krb5auth_flag > 0)
639 		syslog(LOG_NOTICE, "rshd: Kerberos mode is ON");
640 	else
641 		syslog(LOG_NOTICE, "rshd: Kerberos mode is OFF");
642 #endif /* DEBUG */
643 
644 	if (krb5auth_flag > 0) {
645 		if ((status = recvauth(f, &valid_checksum))) {
646 			syslog(LOG_ERR, gettext("Kerberos Authentication "
647 					"failed \n"));
648 			error("Authentication failed: %s\n",
649 					error_message(status));
650 			(void) audit_rshd_fail("Kerberos Authentication "
651 				"failed", hostname, remuser, locuser, cmdbuf);
652 			exit(1);
653 		}
654 
655 		if (checksum_required && !valid_checksum &&
656 			kcmd_protocol == KCMD_OLD_PROTOCOL) {
657 			syslog(LOG_WARNING, "Client did not supply required"
658 					" checksum--connection rejected.");
659 			error("Client did not supply required"
660 				"checksum--connection rejected.\n");
661 			(void) audit_rshd_fail("Client did not supply required"
662 				" checksum--connection rejected.", hostname,
663 				remuser, locuser, cmdbuf);	/* BSM */
664 			goto signout;
665 		}
666 
667 		/*
668 		 * Authentication has succeeded, we now need
669 		 * to check authorization.
670 		 *
671 		 * krb5_kuserok returns 1 if OK.
672 		 */
673 		if (client && krb5_kuserok(bsd_context, client, locuser)) {
674 			auth_sent |= AUTH_KRB5;
675 		} else {
676 			syslog(LOG_ERR, "Principal %s (%s@%s) for local user "
677 				"%s failed krb5_kuserok.\n",
678 				kremuser, remuser, hostname, locuser);
679 		}
680 	} else {
681 		getstr(netf, remuser, sizeof (remuser), "remuser");
682 		getstr(netf, locuser, sizeof (locuser), "locuser");
683 		getstr(netf, cmdbuf, sizeof (cmdbuf), "command");
684 	}
685 
686 #ifdef DEBUG
687 	syslog(LOG_NOTICE, "rshd: locuser = %s, remuser = %s, cmdbuf = %s",
688 			locuser, remuser, cmdbuf);
689 #endif /* DEBUG */
690 
691 	/*
692 	 * Note that there is no rsh conv functions at present.
693 	 */
694 	if (krb5auth_flag > 0) {
695 		if ((err = pam_start("krsh", locuser, NULL, &pamh))
696 				!= PAM_SUCCESS) {
697 			syslog(LOG_ERR, "pam_start() failed: %s\n",
698 				pam_strerror(0, err));
699 			exit(1);
700 		}
701 	}
702 	else
703 	{
704 		if ((err = pam_start("rsh", locuser, NULL, &pamh))
705 				!= PAM_SUCCESS) {
706 			syslog(LOG_ERR, "pam_start() failed: %s\n",
707 				pam_strerror(0, err));
708 			exit(1);
709 		}
710 	}
711 	if ((err = pam_set_item(pamh, PAM_RHOST, hostname)) != PAM_SUCCESS) {
712 		syslog(LOG_ERR, "pam_set_item() failed: %s\n",
713 			pam_strerror(pamh, err));
714 		exit(1);
715 	}
716 	if ((err = pam_set_item(pamh, PAM_RUSER, remuser)) != PAM_SUCCESS) {
717 		syslog(LOG_ERR, "pam_set_item() failed: %s\n",
718 			pam_strerror(pamh, err));
719 		exit(1);
720 	}
721 
722 	pwd = getpwnam(locuser);
723 	shpwd = getspnam(locuser);
724 	if ((pwd == NULL) || (shpwd == NULL)) {
725 		if (krb5auth_flag > 0)
726 			syslog(LOG_ERR, "Principal %s (%s@%s) for local user "
727 				"%s has no account.\n", kremuser, remuser,
728 							hostname, locuser);
729 		error("permission denied.\n");
730 		(void) audit_rshd_fail("Login incorrect", hostname,
731 			remuser, locuser, cmdbuf);	/* BSM */
732 		exit(1);
733 	}
734 
735 	if (krb5auth_flag > 0) {
736 		(void) snprintf(repository, sizeof (repository),
737 					KRB5_REPOSITORY_NAME);
738 		/*
739 		 * We currently only support special handling of the
740 		 * KRB5 PAM repository
741 		 */
742 		if (strlen(locuser) != 0) {
743 			krb5_repository_data_t krb5_data;
744 			pam_repository_t pam_rep_data;
745 
746 			krb5_data.principal = locuser;
747 			krb5_data.flags = SUNW_PAM_KRB5_ALREADY_AUTHENTICATED;
748 
749 			pam_rep_data.type = repository;
750 			pam_rep_data.scope = (void *)&krb5_data;
751 			pam_rep_data.scope_len = sizeof (krb5_data);
752 
753 			(void) pam_set_item(pamh, PAM_REPOSITORY,
754 					(void *)&pam_rep_data);
755 		}
756 	}
757 
758 	/*
759 	 * maintain 2.1 and 4.* and BSD semantics with anonymous rshd
760 	 */
761 	if (shpwd->sp_pwdp != 0 && *shpwd->sp_pwdp != '\0' &&
762 	    (v = pam_authenticate(pamh, 0)) != PAM_SUCCESS) {
763 		error("permission denied\n");
764 		(void) audit_rshd_fail("Permission denied", hostname,
765 			remuser, locuser, cmdbuf);	/* BSM */
766 		(void) pam_end(pamh, v);
767 		exit(1);
768 	}
769 
770 	if (krb5auth_flag > 0) {
771 		if (require_encrypt && (!do_encrypt)) {
772 			error("You must use encryption.\n");
773 			(void) audit_rshd_fail("You must use encryption.",
774 				hostname, remuser, locuser, cmdbuf); /* BSM */
775 			goto signout;
776 		}
777 
778 		if (!(auth_ok & auth_sent)) {
779 			if (auth_sent) {
780 				error("Another authentication mechanism "
781 				    "must be used to access this host.\n");
782 				(void) audit_rshd_fail("Another authentication"
783 					" mechanism must be used to access"
784 					" this host.\n", hostname, remuser,
785 					locuser, cmdbuf); /* BSM */
786 				goto signout;
787 			} else {
788 				error("Permission denied.\n");
789 				(void) audit_rshd_fail("Permission denied.",
790 					hostname, remuser, locuser, cmdbuf);
791 					/* BSM */
792 				goto signout;
793 			}
794 		}
795 
796 
797 		if (pwd->pw_uid && !access("/etc/nologin", F_OK)) {
798 			error("Logins currently disabled.\n");
799 			(void) audit_rshd_fail("Logins currently disabled.",
800 				hostname, remuser, locuser, cmdbuf);
801 			goto signout;
802 		}
803 
804 		/* Log access to account */
805 		if (pwd && (pwd->pw_uid == 0)) {
806 			syslog(LOG_NOTICE, "Executing %s for user %s (%s@%s)"
807 			    " as ROOT", cmdbuf,
808 			    kremuser, remuser, hostname);
809 		}
810 	}
811 
812 	if ((v = pam_acct_mgmt(pamh, 0)) != PAM_SUCCESS) {
813 		switch (v) {
814 		case PAM_NEW_AUTHTOK_REQD:
815 			error("password expired\n");
816 			(void) audit_rshd_fail("Password expired", hostname,
817 				remuser, locuser, cmdbuf); /* BSM */
818 			break;
819 		case PAM_PERM_DENIED:
820 			error("account expired\n");
821 			(void) audit_rshd_fail("Account expired", hostname,
822 				remuser, locuser, cmdbuf); /* BSM */
823 			break;
824 		case PAM_AUTHTOK_EXPIRED:
825 			error("password expired\n");
826 			(void) audit_rshd_fail("Password expired", hostname,
827 				remuser, locuser, cmdbuf); /* BSM */
828 			break;
829 		default:
830 			error("login incorrect\n");
831 			(void) audit_rshd_fail("Permission denied", hostname,
832 				remuser, locuser, cmdbuf); /* BSM */
833 			break;
834 		}
835 		(void) pam_end(pamh, PAM_ABORT);
836 		exit(1);
837 	}
838 
839 	if (chdir(pwd->pw_dir) < 0) {
840 		(void) chdir("/");
841 #ifdef notdef
842 		error("No remote directory.\n");
843 
844 		exit(1);
845 #endif
846 	}
847 
848 	/*
849 	 * XXX There is no session management currently being done
850 	 */
851 
852 	(void) write(STDERR_FILENO, "\0", 1);
853 	if (port || do_encrypt) {
854 		if ((pipe(pv) < 0)) {
855 			error("Can't make pipe.\n");
856 			(void) pam_end(pamh, PAM_ABORT);
857 			exit(1);
858 		}
859 		if (do_encrypt) {
860 			if (pipe(pw) < 0) {
861 				error("Can't make pipe 2.\n");
862 				(void) pam_end(pamh, PAM_ABORT);
863 				exit(1);
864 			}
865 			if (pipe(px) < 0) {
866 				error("Can't make pipe 3.\n");
867 				(void) pam_end(pamh, PAM_ABORT);
868 				exit(1);
869 			}
870 		}
871 		pid = fork();
872 		if (pid == (pid_t)-1)  {
873 			error("Fork (to start shell) failed on server.  "
874 				"Please try again later.\n");
875 			(void) pam_end(pamh, PAM_ABORT);
876 			exit(1);
877 		}
878 		if (pid) {
879 			fd_set ready;
880 			fd_set readfrom;
881 
882 			(void) close(STDIN_FILENO);
883 			(void) close(STDOUT_FILENO);
884 			(void) close(STDERR_FILENO);
885 			(void) close(pv[1]);
886 			if (do_encrypt) {
887 				(void) close(pw[1]);
888 				(void) close(px[0]);
889 			} else {
890 				(void) close(f);
891 			}
892 
893 			(void) FD_ZERO(&readfrom);
894 
895 			FD_SET(pv[0], &readfrom);
896 			if (do_encrypt) {
897 				FD_SET(pw[0], &readfrom);
898 				FD_SET(f, &readfrom);
899 			}
900 			if (port)
901 				FD_SET(s, &readfrom);
902 
903 			/* read f (net), write to px[1] (child stdin) */
904 			/* read pw[0] (child stdout), write to f (net) */
905 			/* read s (alt. channel), signal child */
906 			/* read pv[0] (child stderr), write to s */
907 			if (ioctl(pv[0], FIONBIO, (char *)&one) == -1)
908 				syslog(LOG_INFO, "ioctl FIONBIO: %m");
909 			if (do_encrypt &&
910 				ioctl(pw[0], FIONBIO, (char *)&one) == -1)
911 				syslog(LOG_INFO, "ioctl FIONBIO: %m");
912 			do {
913 				ready = readfrom;
914 				if (select(FD_SETSIZE, &ready, NULL,
915 					NULL, NULL) < 0) {
916 					if (errno == EINTR) {
917 						continue;
918 					} else {
919 						break;
920 					}
921 				}
922 				/*
923 				 * Read from child stderr, write to net
924 				 */
925 				if (port && FD_ISSET(pv[0], &ready)) {
926 					errno = 0;
927 					cc = read(pv[0], buf, sizeof (buf));
928 					if (cc <= 0) {
929 						(void) shutdown(s, 2);
930 						FD_CLR(pv[0], &readfrom);
931 					} else {
932 						(void) deswrite(s, buf, cc, 1);
933 					}
934 				}
935 				/*
936 				 * Read from alternate channel, signal child
937 				 */
938 				if (port && FD_ISSET(s, &ready)) {
939 					if ((int)desread(s, &sig, 1, 1) <= 0)
940 						FD_CLR(s, &readfrom);
941 					else
942 						(void) killpg(pid, sig);
943 				}
944 				/*
945 				 * Read from child stdout, write to net
946 				 */
947 				if (do_encrypt && FD_ISSET(pw[0], &ready)) {
948 					errno = 0;
949 					cc = read(pw[0], buf, sizeof (buf));
950 					if (cc <= 0) {
951 						(void) shutdown(f, 2);
952 						FD_CLR(pw[0], &readfrom);
953 					} else {
954 						(void) deswrite(f, buf, cc, 0);
955 					}
956 				}
957 				/*
958 				 * Read from the net, write to child stdin
959 				 */
960 				if (do_encrypt && FD_ISSET(f, &ready)) {
961 					errno = 0;
962 					cc = desread(f, buf, sizeof (buf), 0);
963 					if (cc <= 0) {
964 						(void) close(px[1]);
965 						FD_CLR(f, &readfrom);
966 					} else {
967 						int wcc;
968 						wcc = write(px[1], buf, cc);
969 						if (wcc == -1) {
970 							/*
971 							 * pipe closed,
972 							 * don't read any
973 							 * more
974 							 *
975 							 * might check for
976 							 * EPIPE
977 							 */
978 						    (void) close(px[1]);
979 						    FD_CLR(f, &readfrom);
980 						} else if (wcc != cc) {
981 						    /* CSTYLED */
982 						    syslog(LOG_INFO, gettext("only wrote %d/%d to child"),
983 						    wcc, cc);
984 						}
985 					}
986 				}
987 			} while ((port && FD_ISSET(s, &readfrom)) ||
988 				(port && FD_ISSET(pv[0], &readfrom)) ||
989 				(do_encrypt && FD_ISSET(f, &readfrom)) ||
990 				(do_encrypt && FD_ISSET(pw[0], &readfrom)));
991 #ifdef DEBUG
992 			syslog(LOG_INFO, "Shell process completed.");
993 #endif /* DEBUG */
994 			if (ccache)
995 				(void) pam_close_session(pamh, 0);
996 			(void) pam_end(pamh, PAM_SUCCESS);
997 
998 			exit(0);
999 		} /* End of Parent block */
1000 
1001 		(void) setsid();	/* Should be the same as above. */
1002 		(void) close(pv[0]);
1003 		(void) dup2(pv[1], 2);
1004 		(void) close(pv[1]);
1005 		if (port)
1006 			(void) close(s);
1007 		if (do_encrypt) {
1008 			(void) close(f);
1009 			(void) close(pw[0]);
1010 			(void) close(px[1]);
1011 
1012 			(void) dup2(px[0], 0);
1013 			(void) dup2(pw[1], 1);
1014 
1015 			(void) close(px[0]);
1016 			(void) close(pw[1]);
1017 		}
1018 	}
1019 
1020 	if (*pwd->pw_shell == '\0')
1021 		pwd->pw_shell = "/bin/sh";
1022 	if (!do_encrypt)
1023 		(void) close(f);
1024 	/*
1025 	 * write audit record before making uid switch
1026 	 */
1027 	(void) audit_rshd_success(hostname, remuser, locuser, cmdbuf); /* BSM */
1028 
1029 	/* set the real (and effective) GID */
1030 	if (setgid(pwd->pw_gid) == -1) {
1031 		error("Invalid gid.\n");
1032 		(void) pam_end(pamh, PAM_ABORT);
1033 		exit(1);
1034 	}
1035 
1036 	/*
1037 	 * Initialize the supplementary group access list.
1038 	 */
1039 	if (strlen(locuser) == 0) {
1040 		error("No local user.\n");
1041 		(void) pam_end(pamh, PAM_ABORT);
1042 		exit(1);
1043 	}
1044 	if (initgroups(locuser, pwd->pw_gid) == -1) {
1045 		error("Initgroup failed.\n");
1046 		(void) pam_end(pamh, PAM_ABORT);
1047 		exit(1);
1048 	}
1049 
1050 	if ((v = pam_setcred(pamh, PAM_ESTABLISH_CRED)) != PAM_SUCCESS) {
1051 		error("Insufficient credentials.\n");
1052 		(void) pam_end(pamh, v);
1053 		exit(1);
1054 	}
1055 
1056 	/* set the real (and effective) UID */
1057 	if (setuid(pwd->pw_uid) == -1) {
1058 		error("Invalid uid.\n");
1059 		(void) pam_end(pamh, PAM_ABORT);
1060 		exit(1);
1061 	}
1062 
1063 	/* Change directory only after becoming the appropriate user. */
1064 	if (chdir(pwd->pw_dir) < 0) {
1065 		(void) chdir("/");
1066 		if (krb5auth_flag > 0) {
1067 			syslog(LOG_ERR, "Principal %s  (%s@%s) for local user"
1068 				" %s has no home directory.",
1069 				kremuser, remuser, hostname, locuser);
1070 			error("No remote directory.\n");
1071 			goto signout;
1072 		}
1073 #ifdef notdef
1074 		error("No remote directory.\n");
1075 		exit(1);
1076 #endif
1077 	}
1078 
1079 	path = (pwd->pw_uid == 0) ? rootpath : userpath;
1080 
1081 	/*
1082 	 * Space for the following environment variables are dynamically
1083 	 * allocated because their lengths are not known before calling
1084 	 * getpwnam().
1085 	 */
1086 	homedir_len = strlen(pwd->pw_dir) + strlen(homestr) + 1;
1087 	shell_len = strlen(pwd->pw_shell) + strlen(shellstr) + 1;
1088 	username_len = strlen(pwd->pw_name) + strlen(userstr) + 1;
1089 	homedir = (char *)malloc(homedir_len);
1090 	shell = (char *)malloc(shell_len);
1091 	username = (char *)malloc(username_len);
1092 	if (homedir == NULL || shell == NULL || username == NULL) {
1093 		perror("malloc");
1094 		exit(1);
1095 	}
1096 	(void) snprintf(homedir, homedir_len, "%s%s", homestr, pwd->pw_dir);
1097 	(void) snprintf(shell, shell_len, "%s%s", shellstr, pwd->pw_shell);
1098 	(void) snprintf(username, username_len, "%s%s", userstr, pwd->pw_name);
1099 
1100 	/* Pass timezone to executed command. */
1101 	if (tzenv = getenv("TZ")) {
1102 		tz_len = strlen(tzenv) + strlen(tzstr) + 1;
1103 		tz = malloc(tz_len);
1104 		if (tz != NULL)
1105 			(void) snprintf(tz, tz_len, "%s%s", tzstr, tzenv);
1106 	}
1107 
1108 	add_to_envinit(homedir);
1109 	add_to_envinit(shell);
1110 	add_to_envinit(path);
1111 	add_to_envinit(username);
1112 	add_to_envinit(tz);
1113 
1114 	if (krb5auth_flag > 0) {
1115 		int length;
1116 		char *buffer;
1117 
1118 		/*
1119 		 * If we have KRB5CCNAME set, then copy into the child's
1120 		 * environment.  This can't really have a fixed position
1121 		 * because `tz' may or may not be set.
1122 		 */
1123 		if (getenv("KRB5CCNAME")) {
1124 			length = (int)strlen(getenv("KRB5CCNAME")) +
1125 					(int)strlen("KRB5CCNAME=") + 1;
1126 			buffer = (char *)malloc(length);
1127 
1128 			if (buffer) {
1129 				(void) snprintf(buffer, length, "KRB5CCNAME=%s",
1130 						getenv("KRB5CCNAME"));
1131 				add_to_envinit(buffer);
1132 			}
1133 		} {
1134 			/* These two are covered by ADDRPAD */
1135 			length = strlen(inet_ntoa(localaddr.sin_addr)) + 1 +
1136 					strlen("KRB5LOCALADDR=");
1137 			(void) snprintf(local_addr, length, "KRB5LOCALADDR=%s",
1138 				inet_ntoa(localaddr.sin_addr));
1139 			add_to_envinit(local_addr);
1140 
1141 			length = strlen(inet_ntoa(sin->sin_addr)) + 1 +
1142 					strlen("KRB5REMOTEADDR=");
1143 			(void) snprintf(remote_addr, length,
1144 				"KRB5REMOTEADDR=%s", inet_ntoa(sin->sin_addr));
1145 			add_to_envinit(remote_addr);
1146 		}
1147 
1148 		/*
1149 		 * If we do anything else, make sure there is
1150 		 * space in the array.
1151 		 */
1152 		for (cnt = 0; cnt < num_env; cnt++) {
1153 			char *buf;
1154 
1155 			if (getenv(save_env[cnt])) {
1156 				length = (int)strlen(getenv(save_env[cnt])) +
1157 					(int)strlen(save_env[cnt]) + 2;
1158 
1159 				buf = (char *)malloc(length);
1160 				if (buf) {
1161 					(void) snprintf(buf, length, "%s=%s",
1162 						save_env[cnt],
1163 						getenv(save_env[cnt]));
1164 					add_to_envinit(buf);
1165 				}
1166 			}
1167 		}
1168 
1169 	}
1170 
1171 	/*
1172 	 * add PAM environment variables set by modules
1173 	 * -- only allowed 16 (PAM_ENV_ELIM)
1174 	 * -- check to see if the environment variable is legal
1175 	 */
1176 	if ((pam_env = pam_getenvlist(pamh)) != 0) {
1177 		while (pam_env[idx] != 0) {
1178 			if (idx < PAM_ENV_ELIM &&
1179 			    legalenvvar(pam_env[idx])) {
1180 				add_to_envinit(pam_env[idx]);
1181 			}
1182 			idx++;
1183 		}
1184 	}
1185 
1186 	(void) pam_end(pamh, PAM_SUCCESS);
1187 
1188 	/*
1189 	 * Pick up locale environment variables, if any.
1190 	 */
1191 	lenvp = renvp;
1192 	while (*lenvp != NULL) {
1193 		int	index;
1194 
1195 		for (index = 0; localeenv[index] != NULL; index++)
1196 			/*
1197 			 * locale_envmatch() returns 1 if
1198 			 * *lenvp is localenev[index] and valid.
1199 			 */
1200 			if (locale_envmatch(localeenv[index], *lenvp)) {
1201 				add_to_envinit(*lenvp);
1202 				break;
1203 			}
1204 
1205 		lenvp++;
1206 	}
1207 
1208 	cp = strrchr(pwd->pw_shell, '/');
1209 	if (cp != NULL)
1210 		cp++;
1211 	else
1212 		cp = pwd->pw_shell;
1213 	/*
1214 	 * rdist has been moved to /usr/bin, so /usr/ucb/rdist might not
1215 	 * be present on a system.  So if it doesn't exist we fall back
1216 	 * and try for it in /usr/bin.  We take care to match the space
1217 	 * after the name because the only purpose of this is to protect
1218 	 * the internal call from old rdist's, not humans who type
1219 	 * "rsh foo /usr/ucb/rdist".
1220 	 */
1221 #define	RDIST_PROG_NAME	"/usr/ucb/rdist -Server"
1222 	if (strncmp(cmdbuf, RDIST_PROG_NAME, strlen(RDIST_PROG_NAME)) == 0) {
1223 		if (stat("/usr/ucb/rdist", &statb) != 0) {
1224 			(void) strncpy(cmdbuf + 5, "bin", 3);
1225 		}
1226 	}
1227 
1228 #ifdef DEBUG
1229 	syslog(LOG_NOTICE, "rshd: cmdbuf = %s", cmdbuf);
1230 	if (do_encrypt)
1231 		syslog(LOG_NOTICE, "rshd: cmd to be exec'ed = %s",
1232 			((char *)cmdbuf + 3));
1233 #endif /* DEBUG */
1234 
1235 	if (do_encrypt && (strncmp(cmdbuf, "-x ", 3) == 0)) {
1236 		(void) execle(pwd->pw_shell, cp, "-c", (char *)cmdbuf + 3,
1237 				NULL, envinit);
1238 	} else {
1239 		(void) execle(pwd->pw_shell, cp, "-c", cmdbuf, NULL,
1240 				envinit);
1241 	}
1242 
1243 	perror(pwd->pw_shell);
1244 	exit(1);
1245 
1246 signout:
1247 	if (ccache)
1248 		(void) pam_close_session(pamh, 0);
1249 	ccache = NULL;
1250 	(void) pam_end(pamh, PAM_ABORT);
1251 	exit(1);
1252 }
1253 
1254 static void
1255 getstr(fd, buf, cnt, err)
1256 	int fd;
1257 	char *buf;
1258 	int cnt;
1259 	char *err;
1260 {
1261 	char c;
1262 
1263 	do {
1264 		if (read(fd, &c, 1) != 1)
1265 			exit(1);
1266 		if (cnt-- == 0) {
1267 			error("%s too long\n", err);
1268 			exit(1);
1269 		}
1270 		*buf++ = c;
1271 	} while (c != 0);
1272 }
1273 
1274 /*PRINTFLIKE1*/
1275 static void
1276 error(char *fmt, ...)
1277 {
1278 	va_list ap;
1279 	char buf[RSHD_BUFSIZ];
1280 
1281 	buf[0] = 1;
1282 	va_start(ap, fmt);
1283 	(void) vsnprintf(&buf[1], sizeof (buf) - 1, fmt, ap);
1284 	va_end(ap);
1285 	(void) write(STDERR_FILENO, buf, strlen(buf));
1286 }
1287 
1288 static char *illegal[] = {
1289 	"SHELL=",
1290 	"HOME=",
1291 	"LOGNAME=",
1292 #ifndef NO_MAIL
1293 	"MAIL=",
1294 #endif
1295 	"CDPATH=",
1296 	"IFS=",
1297 	"PATH=",
1298 	"USER=",
1299 	"TZ=",
1300 	0
1301 };
1302 
1303 /*
1304  * legalenvvar - can PAM modules insert this environmental variable?
1305  */
1306 
1307 static int
1308 legalenvvar(char *s)
1309 {
1310 	register char **p;
1311 
1312 	for (p = illegal; *p; p++)
1313 		if (strncmp(s, *p, strlen(*p)) == 0)
1314 			return (0);
1315 
1316 	if (s[0] == 'L' && s[1] == 'D' && s[2] == '_')
1317 		return (0);
1318 
1319 	return (1);
1320 }
1321 
1322 /*
1323  * Add a string to the environment of the new process.
1324  */
1325 
1326 static void
1327 add_to_envinit(char *string)
1328 {
1329 	/*
1330 	 * Reserve space for 2 * 8 = 16 environment entries initially which
1331 	 * should be enough to avoid reallocation of "envinit" in most cases.
1332 	 */
1333 	static int	size = 8;
1334 	static int	index = 0;
1335 
1336 	if (string == NULL)
1337 		return;
1338 
1339 	if ((envinit == NULL) || (index == size)) {
1340 		size *= 2;
1341 		envinit = realloc(envinit, (size + 1) * sizeof (char *));
1342 		if (envinit == NULL) {
1343 			perror("malloc");
1344 			exit(1);
1345 		}
1346 	}
1347 
1348 	envinit[index++] = string;
1349 	envinit[index] = NULL;
1350 }
1351 
1352 /*
1353  * Check if lenv and penv matches or not.
1354  */
1355 static int
1356 locale_envmatch(char *lenv, char *penv)
1357 {
1358 	while ((*lenv == *penv) && (*lenv != '\0') && (*penv != '=')) {
1359 		lenv++;
1360 		penv++;
1361 	}
1362 
1363 	/*
1364 	 * '/' is eliminated for security reason.
1365 	 */
1366 	return ((*lenv == '\0' && *penv == '=' && *(penv + 1) != '/'));
1367 }
1368 
1369 #ifndef	KRB_SENDAUTH_VLEN
1370 #define	KRB_SENDAUTH_VLEN	8	/* length for version strings */
1371 #endif
1372 
1373 /* MUST be KRB_SENDAUTH_VLEN chars */
1374 #define	KRB_SENDAUTH_VERS	"AUTHV0.1"
1375 #define	SIZEOF_INADDR sizeof (struct in_addr)
1376 
1377 static krb5_error_code
1378 recvauth(int netf, int *valid_checksum)
1379 {
1380 	krb5_auth_context auth_context = NULL;
1381 	krb5_error_code status;
1382 	struct sockaddr_in laddr;
1383 	int len;
1384 	krb5_data inbuf;
1385 	krb5_authenticator *authenticator;
1386 	krb5_ticket *ticket;
1387 	krb5_rcache rcache;
1388 	krb5_data version;
1389 	krb5_encrypt_block eblock;	/* eblock for encrypt/decrypt */
1390 	krb5_data desinbuf;
1391 	krb5_data desoutbuf;
1392 	char des_inbuf[2 * RSHD_BUFSIZ];
1393 			/* needs to be > largest read size */
1394 	char des_outbuf[2 * RSHD_BUFSIZ + 4];
1395 			/* needs to be > largest write size */
1396 
1397 	*valid_checksum = 0;
1398 	len = sizeof (laddr);
1399 
1400 	if (getsockname(netf, (struct sockaddr *)&laddr, &len)) {
1401 		exit(1);
1402 	}
1403 
1404 	if (status = krb5_auth_con_init(bsd_context, &auth_context))
1405 		return (status);
1406 
1407 	if (status = krb5_auth_con_genaddrs(bsd_context, auth_context, netf,
1408 		KRB5_AUTH_CONTEXT_GENERATE_REMOTE_FULL_ADDR))
1409 		return (status);
1410 
1411 	status = krb5_auth_con_getrcache(bsd_context, auth_context, &rcache);
1412 	if (status)
1413 		return (status);
1414 
1415 	if (!rcache) {
1416 		krb5_principal server;
1417 
1418 		status = krb5_sname_to_principal(bsd_context, 0, 0,
1419 			KRB5_NT_SRV_HST, &server);
1420 		if (status)
1421 			return (status);
1422 
1423 		status = krb5_get_server_rcache(bsd_context,
1424 			krb5_princ_component(bsd_context, server, 0),
1425 			&rcache);
1426 		krb5_free_principal(bsd_context, server);
1427 		if (status)
1428 			return (status);
1429 
1430 		status = krb5_auth_con_setrcache(bsd_context, auth_context,
1431 							rcache);
1432 		if (status)
1433 			return (status);
1434 	}
1435 
1436 	status = krb5_recvauth_version(bsd_context, &auth_context, &netf,
1437 		NULL,		/* Specify daemon principal */
1438 		0,		/* no flags */
1439 		keytab,		/* normally NULL to use v5srvtab */
1440 		&ticket,	/* return ticket */
1441 		&version);	/* application version string */
1442 
1443 
1444 	if (status) {
1445 		getstr(netf, locuser, sizeof (locuser), "locuser");
1446 		getstr(netf, cmdbuf, sizeof (cmdbuf), "command");
1447 		getstr(netf, remuser, sizeof (locuser), "remuser");
1448 		return (status);
1449 	}
1450 	getstr(netf, locuser, sizeof (locuser), "locuser");
1451 	getstr(netf, cmdbuf, sizeof (cmdbuf), "command");
1452 
1453 	/* Must be V5  */
1454 
1455 	kcmd_protocol = KCMD_UNKNOWN_PROTOCOL;
1456 	if (version.length != 9 || version.data == NULL) {
1457 		syslog(LOG_ERR, "bad application version length");
1458 		error(gettext("bad application version length\n"));
1459 		exit(1);
1460 	}
1461 	if (strncmp(version.data, "KCMDV0.1", 9) == 0) {
1462 		kcmd_protocol = KCMD_OLD_PROTOCOL;
1463 	} else if (strncmp(version.data, "KCMDV0.2", 9) == 0) {
1464 		kcmd_protocol = KCMD_NEW_PROTOCOL;
1465 	} else {
1466 		syslog(LOG_ERR, "Unrecognized KCMD protocol (%s)",
1467 			(char *)version.data);
1468 		error(gettext("Unrecognized KCMD protocol (%s)"),
1469 			(char *)version.data);
1470 		exit(1);
1471 	}
1472 	getstr(netf, remuser, sizeof (locuser), "remuser");
1473 
1474 	if ((status = krb5_unparse_name(bsd_context, ticket->enc_part2->client,
1475 			&kremuser)))
1476 		return (status);
1477 
1478 	if ((status = krb5_copy_principal(bsd_context,
1479 				ticket->enc_part2->client, &client)))
1480 		return (status);
1481 
1482 
1483 	if (checksum_required && (kcmd_protocol == KCMD_OLD_PROTOCOL)) {
1484 		if ((status = krb5_auth_con_getauthenticator(bsd_context,
1485 			auth_context, &authenticator)))
1486 			return (status);
1487 
1488 		if (authenticator->checksum && checksum_required) {
1489 			struct sockaddr_in adr;
1490 			int adr_length = sizeof (adr);
1491 			int chksumsize = strlen(cmdbuf) + strlen(locuser) + 32;
1492 			krb5_data input;
1493 			krb5_keyblock key;
1494 
1495 			char *chksumbuf = (char *)malloc(chksumsize);
1496 
1497 			if (chksumbuf == 0)
1498 				goto error_cleanup;
1499 			if (getsockname(netf, (struct sockaddr *)&adr,
1500 					&adr_length) != 0)
1501 				goto error_cleanup;
1502 
1503 			(void) snprintf(chksumbuf, chksumsize, "%u:",
1504 					ntohs(adr.sin_port));
1505 			if (strlcat(chksumbuf, cmdbuf,
1506 					chksumsize) >= chksumsize) {
1507 				syslog(LOG_ERR, "cmd buffer too long.");
1508 				free(chksumbuf);
1509 				return (-1);
1510 			}
1511 			if (strlcat(chksumbuf, locuser,
1512 					chksumsize) >= chksumsize) {
1513 				syslog(LOG_ERR, "locuser too long.");
1514 				free(chksumbuf);
1515 				return (-1);
1516 			}
1517 
1518 			input.data = chksumbuf;
1519 			input.length = strlen(chksumbuf);
1520 			key.magic = ticket->enc_part2->session->magic;
1521 			key.enctype = ticket->enc_part2->session->enctype;
1522 			key.contents = ticket->enc_part2->session->contents;
1523 			key.length = ticket->enc_part2->session->length;
1524 
1525 			status = krb5_c_verify_checksum(bsd_context,
1526 			    &key, 0, &input, authenticator->checksum,
1527 			    (unsigned int *)valid_checksum);
1528 
1529 			if (status == 0 && *valid_checksum == 0)
1530 			    status = KRB5KRB_AP_ERR_BAD_INTEGRITY;
1531 error_cleanup:
1532 			if (chksumbuf)
1533 				krb5_xfree(chksumbuf);
1534 			if (status) {
1535 				krb5_free_authenticator(bsd_context,
1536 						authenticator);
1537 				return (status);
1538 			}
1539 		}
1540 		krb5_free_authenticator(bsd_context, authenticator);
1541 	}
1542 
1543 
1544 	if ((strncmp(cmdbuf, "-x ", 3) == 0)) {
1545 		if (krb5_privacy_allowed()) {
1546 			do_encrypt = 1;
1547 		} else {
1548 			syslog(LOG_ERR, "rshd: Encryption not supported");
1549 			error("rshd: Encryption not supported. \n");
1550 			exit(2);
1551 		}
1552 
1553 		status = krb5_auth_con_getremotesubkey(bsd_context,
1554 						    auth_context,
1555 						    &sessionkey);
1556 		if (status) {
1557 			syslog(LOG_ERR, "Error getting KRB5 session subkey");
1558 			error(gettext("Error getting KRB5 session subkey"));
1559 			exit(1);
1560 		}
1561 		/*
1562 		 * The "new" protocol requires that a subkey be sent.
1563 		 */
1564 		if (sessionkey == NULL && kcmd_protocol == KCMD_NEW_PROTOCOL) {
1565 			syslog(LOG_ERR, "No KRB5 session subkey sent");
1566 			error(gettext("No KRB5 session subkey sent"));
1567 			exit(1);
1568 		}
1569 		/*
1570 		 * The "old" protocol does not permit an authenticator subkey.
1571 		 * The key is taken from the ticket instead (see below).
1572 		 */
1573 		if (sessionkey != NULL && kcmd_protocol == KCMD_OLD_PROTOCOL) {
1574 			syslog(LOG_ERR, "KRB5 session subkey not permitted "
1575 				"with old KCMD protocol");
1576 			error(gettext("KRB5 session subkey not permitted "
1577 				"with old KCMD protocol"));
1578 			exit(1);
1579 		}
1580 		/*
1581 		 * If no key at this point, use the session key from
1582 		 * the ticket.
1583 		 */
1584 		if (sessionkey == NULL) {
1585 			/*
1586 			 * Save the session key so we can configure the crypto
1587 			 * module later.
1588 			 */
1589 			status = krb5_copy_keyblock(bsd_context,
1590 						ticket->enc_part2->session,
1591 						&sessionkey);
1592 			if (status) {
1593 				syslog(LOG_ERR, "krb5_copy_keyblock failed");
1594 				error(gettext("krb5_copy_keyblock failed"));
1595 				exit(1);
1596 			}
1597 		}
1598 		/*
1599 		 * If session key still cannot be found, we must
1600 		 * exit because encryption is required here
1601 		 * when encr_flag (-x) is set.
1602 		 */
1603 		if (sessionkey == NULL) {
1604 			syslog(LOG_ERR, "Could not find an encryption key");
1605 			error(gettext("Could not find an encryption key"));
1606 			exit(1);
1607 		}
1608 
1609 		/*
1610 		 * Initialize parameters/buffers for desread & deswrite here.
1611 		 */
1612 		desinbuf.data = des_inbuf;
1613 		desoutbuf.data = des_outbuf;
1614 		desinbuf.length = sizeof (des_inbuf);
1615 		desoutbuf.length = sizeof (des_outbuf);
1616 
1617 		eblock.crypto_entry = sessionkey->enctype;
1618 		eblock.key = (krb5_keyblock *)sessionkey;
1619 
1620 		init_encrypt(do_encrypt, bsd_context, kcmd_protocol,
1621 				&desinbuf, &desoutbuf, SERVER, &eblock);
1622 	}
1623 
1624 	ticket->enc_part2->session = 0;
1625 
1626 	if ((status = krb5_read_message(bsd_context, (krb5_pointer) & netf,
1627 				&inbuf))) {
1628 		error(gettext("Error reading message: %s\n"),
1629 				error_message(status));
1630 		exit(1);
1631 	}
1632 
1633 	if (inbuf.length) {
1634 		krb5_creds **creds = NULL;
1635 
1636 		/* Forwarding being done, read creds */
1637 		if ((status = krb5_rd_cred(bsd_context,
1638 					    auth_context, &inbuf, &creds,
1639 					    NULL))) {
1640 			error("Can't get forwarded credentials: %s\n",
1641 				error_message(status));
1642 			exit(1);
1643 		}
1644 
1645 		/* Store the forwarded creds in the ccache */
1646 		if ((status = store_forw_creds(bsd_context,
1647 					    creds, ticket, locuser,
1648 					    &ccache))) {
1649 			error("Can't store forwarded credentials: %s\n",
1650 				error_message(status));
1651 			exit(1);
1652 		}
1653 		krb5_free_creds(bsd_context, *creds);
1654 	}
1655 
1656 	krb5_free_ticket(bsd_context, ticket);
1657 	return (0);
1658 }
1659 
1660 static void
1661 usage(void)
1662 {
1663 	(void) fprintf(stderr, gettext("%s: rshd [-k5eciU] "
1664 			"[-P path] [-M realm] [-s tos] "
1665 #ifdef DEBUG
1666 			"[-D port] "
1667 #endif /* DEBUG */
1668 			"[-S keytab]"), gettext("usage"));
1669 
1670 	syslog(LOG_ERR, "%s: rshd [-k5eciU] [-P path] [-M realm] [-s tos] "
1671 #ifdef DEBUG
1672 			"[-D port] "
1673 #endif /* DEBUG */
1674 			"[-S keytab]", gettext("usage"));
1675 }
1676