xref: /illumos-gate/usr/src/cmd/bhyve/virtio.h (revision 32640292)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 2013  Chris Torek <torek @ torek net>
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 #ifndef	_BHYVE_VIRTIO_H_
30 #define	_BHYVE_VIRTIO_H_
31 
32 #include <pthread_np.h>
33 #include <machine/atomic.h>
34 
35 #include <dev/virtio/virtio.h>
36 #ifdef __FreeBSD__
37 #include <dev/virtio/virtio_ring.h>
38 #include <dev/virtio/pci/virtio_pci_var.h>
39 #endif
40 
41 /*
42  * These are derived from several virtio specifications.
43  *
44  * Some useful links:
45  *    https://github.com/rustyrussell/virtio-spec
46  *    http://people.redhat.com/pbonzini/virtio-spec.pdf
47  */
48 
49 /*
50  * A virtual device has zero or more "virtual queues" (virtqueue).
51  * Each virtqueue uses at least two 4096-byte pages, laid out thus:
52  *
53  *      +-----------------------------------------------+
54  *      |    "desc":  <N> descriptors, 16 bytes each    |
55  *      |   -----------------------------------------   |
56  *      |   "avail":   2 uint16; <N> uint16; 1 uint16   |
57  *      |   -----------------------------------------   |
58  *      |              pad to 4k boundary               |
59  *      +-----------------------------------------------+
60  *      |   "used": 2 x uint16; <N> elems; 1 uint16     |
61  *      |   -----------------------------------------   |
62  *      |              pad to 4k boundary               |
63  *      +-----------------------------------------------+
64  *
65  * The number <N> that appears here is always a power of two and is
66  * limited to no more than 32768 (as it must fit in a 16-bit field).
67  * If <N> is sufficiently large, the above will occupy more than
68  * two pages.  In any case, all pages must be physically contiguous
69  * within the guest's physical address space.
70  *
71  * The <N> 16-byte "desc" descriptors consist of a 64-bit guest
72  * physical address <addr>, a 32-bit length <len>, a 16-bit
73  * <flags>, and a 16-bit <next> field (all in guest byte order).
74  *
75  * There are three flags that may be set :
76  *	NEXT    descriptor is chained, so use its "next" field
77  *	WRITE   descriptor is for host to write into guest RAM
78  *		(else host is to read from guest RAM)
79  *	INDIRECT   descriptor address field is (guest physical)
80  *		address of a linear array of descriptors
81  *
82  * Unless INDIRECT is set, <len> is the number of bytes that may
83  * be read/written from guest physical address <addr>.  If
84  * INDIRECT is set, WRITE is ignored and <len> provides the length
85  * of the indirect descriptors (and <len> must be a multiple of
86  * 16).  Note that NEXT may still be set in the main descriptor
87  * pointing to the indirect, and should be set in each indirect
88  * descriptor that uses the next descriptor (these should generally
89  * be numbered sequentially).  However, INDIRECT must not be set
90  * in the indirect descriptors.  Upon reaching an indirect descriptor
91  * without a NEXT bit, control returns to the direct descriptors.
92  *
93  * Except inside an indirect, each <next> value must be in the
94  * range [0 .. N) (i.e., the half-open interval).  (Inside an
95  * indirect, each <next> must be in the range [0 .. <len>/16).)
96  *
97  * The "avail" data structures reside in the same pages as the
98  * "desc" structures since both together are used by the device to
99  * pass information to the hypervisor's virtual driver.  These
100  * begin with a 16-bit <flags> field and 16-bit index <idx>, then
101  * have <N> 16-bit <ring> values, followed by one final 16-bit
102  * field <used_event>.  The <N> <ring> entries are simply indices
103  * indices into the descriptor ring (and thus must meet the same
104  * constraints as each <next> value).  However, <idx> is counted
105  * up from 0 (initially) and simply wraps around after 65535; it
106  * is taken mod <N> to find the next available entry.
107  *
108  * The "used" ring occupies a separate page or pages, and contains
109  * values written from the virtual driver back to the guest OS.
110  * This begins with a 16-bit <flags> and 16-bit <idx>, then there
111  * are <N> "vring_used" elements, followed by a 16-bit <avail_event>.
112  * The <N> "vring_used" elements consist of a 32-bit <id> and a
113  * 32-bit <len> (vu_tlen below).  The <id> is simply the index of
114  * the head of a descriptor chain the guest made available
115  * earlier, and the <len> is the number of bytes actually written,
116  * e.g., in the case of a network driver that provided a large
117  * receive buffer but received only a small amount of data.
118  *
119  * The two event fields, <used_event> and <avail_event>, in the
120  * avail and used rings (respectively -- note the reversal!), are
121  * always provided, but are used only if the virtual device
122  * negotiates the VIRTIO_RING_F_EVENT_IDX feature during feature
123  * negotiation.  Similarly, both rings provide a flag --
124  * VRING_AVAIL_F_NO_INTERRUPT and VRING_USED_F_NO_NOTIFY -- in
125  * their <flags> field, indicating that the guest does not need an
126  * interrupt, or that the hypervisor driver does not need a
127  * notify, when descriptors are added to the corresponding ring.
128  * (These are provided only for interrupt optimization and need
129  * not be implemented.)
130  */
131 #define VRING_ALIGN	4096
132 
133 /*
134  * The address of any given virtual queue is determined by a single
135  * Page Frame Number register.  The guest writes the PFN into the
136  * PCI config space.  However, a device that has two or more
137  * virtqueues can have a different PFN, and size, for each queue.
138  * The number of queues is determinable via the PCI config space
139  * VTCFG_R_QSEL register.  Writes to QSEL select the queue: 0 means
140  * queue #0, 1 means queue#1, etc.  Once a queue is selected, the
141  * remaining PFN and QNUM registers refer to that queue.
142  *
143  * QNUM is a read-only register containing a nonzero power of two
144  * that indicates the (hypervisor's) queue size.  Or, if reading it
145  * produces zero, the hypervisor does not have a corresponding
146  * queue.  (The number of possible queues depends on the virtual
147  * device.  The block device has just one; the network device
148  * provides either two -- 0 = receive, 1 = transmit -- or three,
149  * with 2 = control.)
150  *
151  * PFN is a read/write register giving the physical page address of
152  * the virtqueue in guest memory (the guest must allocate enough space
153  * based on the hypervisor's provided QNUM).
154  *
155  * QNOTIFY is effectively write-only: when the guest writes a queue
156  * number to the register, the hypervisor should scan the specified
157  * virtqueue. (Reading QNOTIFY currently always gets 0).
158  */
159 
160 /*
161  * PFN register shift amount
162  */
163 #define	VRING_PFN		12
164 
165 /*
166  * PCI vendor/device IDs
167  */
168 #define	VIRTIO_VENDOR		0x1AF4
169 #define	VIRTIO_DEV_NET		0x1000
170 #define	VIRTIO_DEV_BLOCK	0x1001
171 #define	VIRTIO_DEV_CONSOLE	0x1003
172 #define	VIRTIO_DEV_SCSI		0x1004
173 #define	VIRTIO_DEV_RANDOM	0x1005
174 #define	VIRTIO_DEV_9P		0x1009
175 #define VIRTIO_DEV_INPUT	0x1052
176 
177 /*
178  * PCI revision IDs
179  */
180 #define VIRTIO_REV_INPUT	1
181 
182 /*
183  * PCI subvendor IDs
184  */
185 #define VIRTIO_SUBVEN_INPUT	0x108E
186 
187 /*
188  * PCI subdevice IDs
189  */
190 #define VIRTIO_SUBDEV_INPUT	0x1100
191 
192 /* From section 2.3, "Virtqueue Configuration", of the virtio specification */
193 static inline int
vring_size_aligned(u_int qsz)194 vring_size_aligned(u_int qsz)
195 {
196 	return (roundup2(vring_size(qsz, VRING_ALIGN), VRING_ALIGN));
197 }
198 
199 struct pci_devinst;
200 struct vqueue_info;
201 
202 /*
203  * A virtual device, with some number (possibly 0) of virtual
204  * queues and some size (possibly 0) of configuration-space
205  * registers private to the device.  The virtio_softc should come
206  * at the front of each "derived class", so that a pointer to the
207  * virtio_softc is also a pointer to the more specific, derived-
208  * from-virtio driver's softc.
209  *
210  * Note: inside each hypervisor virtio driver, changes to these
211  * data structures must be locked against other threads, if any.
212  * Except for PCI config space register read/write, we assume each
213  * driver does the required locking, but we need a pointer to the
214  * lock (if there is one) for PCI config space read/write ops.
215  *
216  * When the guest reads or writes the device's config space, the
217  * generic layer checks for operations on the special registers
218  * described above.  If the offset of the register(s) being read
219  * or written is past the CFG area (CFG0 or CFG1), the request is
220  * passed on to the virtual device, after subtracting off the
221  * generic-layer size.  (So, drivers can just use the offset as
222  * an offset into "struct config", for instance.)
223  *
224  * (The virtio layer also makes sure that the read or write is to/
225  * from a "good" config offset, hence vc_cfgsize, and on BAR #0.
226  * However, the driver must verify the read or write size and offset
227  * and that no one is writing a readonly register.)
228  *
229  * The BROKED flag ("this thing done gone and broked") is for future
230  * use.
231  */
232 #define	VIRTIO_USE_MSIX		0x01
233 #define	VIRTIO_EVENT_IDX	0x02	/* use the event-index values */
234 #define	VIRTIO_BROKED		0x08	/* ??? */
235 
236 struct virtio_softc {
237 	struct virtio_consts *vs_vc;	/* constants (see below) */
238 	int	vs_flags;		/* VIRTIO_* flags from above */
239 	pthread_mutex_t *vs_mtx;	/* POSIX mutex, if any */
240 	struct pci_devinst *vs_pi;	/* PCI device instance */
241 	uint32_t vs_negotiated_caps;	/* negotiated capabilities */
242 	struct vqueue_info *vs_queues;	/* one per vc_nvq */
243 	int	vs_curq;		/* current queue */
244 	uint8_t	vs_status;		/* value from last status write */
245 	uint8_t	vs_isr;			/* ISR flags, if not MSI-X */
246 	uint16_t vs_msix_cfg_idx;	/* MSI-X vector for config event */
247 };
248 
249 #define	VS_LOCK(vs)							\
250 do {									\
251 	if (vs->vs_mtx)							\
252 		pthread_mutex_lock(vs->vs_mtx);				\
253 } while (0)
254 
255 #define	VS_UNLOCK(vs)							\
256 do {									\
257 	if (vs->vs_mtx)							\
258 		pthread_mutex_unlock(vs->vs_mtx);			\
259 } while (0)
260 
261 struct virtio_consts {
262 	const char *vc_name;		/* name of driver (for diagnostics) */
263 	int	vc_nvq;			/* number of virtual queues */
264 	size_t	vc_cfgsize;		/* size of dev-specific config regs */
265 	void	(*vc_reset)(void *);	/* called on virtual device reset */
266 	void	(*vc_qnotify)(void *, struct vqueue_info *);
267 					/* called on QNOTIFY if no VQ notify */
268 	int	(*vc_cfgread)(void *, int, int, uint32_t *);
269 					/* called to read config regs */
270 	int	(*vc_cfgwrite)(void *, int, int, uint32_t);
271 					/* called to write config regs */
272 	void    (*vc_apply_features)(void *, uint64_t);
273 				/* called to apply negotiated features */
274 	uint64_t vc_hv_caps;		/* hypervisor-provided capabilities */
275 };
276 
277 /*
278  * Data structure allocated (statically) per virtual queue.
279  *
280  * Drivers may change vq_qsize after a reset.  When the guest OS
281  * requests a device reset, the hypervisor first calls
282  * vs->vs_vc->vc_reset(); then the data structure below is
283  * reinitialized (for each virtqueue: vs->vs_vc->vc_nvq).
284  *
285  * The remaining fields should only be fussed-with by the generic
286  * code.
287  *
288  * Note: the addresses of vq_desc, vq_avail, and vq_used are all
289  * computable from each other, but it's a lot simpler if we just
290  * keep a pointer to each one.  The event indices are similarly
291  * (but more easily) computable, and this time we'll compute them:
292  * they're just XX_ring[N].
293  */
294 #define	VQ_ALLOC	0x01	/* set once we have a pfn */
295 #define	VQ_BROKED	0x02	/* ??? */
296 struct vqueue_info {
297 	uint16_t vq_qsize;	/* size of this queue (a power of 2) */
298 	void	(*vq_notify)(void *, struct vqueue_info *);
299 				/* called instead of vc_notify, if not NULL */
300 
301 	struct virtio_softc *vq_vs;	/* backpointer to softc */
302 	uint16_t vq_num;	/* we're the num'th queue in the softc */
303 
304 	uint16_t vq_flags;	/* flags (see above) */
305 	uint16_t vq_last_avail;	/* a recent value of vq_avail->idx */
306 	uint16_t vq_next_used;	/* index of the next used slot to be filled */
307 	uint16_t vq_save_used;	/* saved vq_used->idx; see vq_endchains */
308 	uint16_t vq_msix_idx;	/* MSI-X index, or VIRTIO_MSI_NO_VECTOR */
309 
310 	uint32_t vq_pfn;	/* PFN of virt queue (not shifted!) */
311 
312 	struct vring_desc *vq_desc;	/* descriptor array */
313 	struct vring_avail *vq_avail;	/* the "avail" ring */
314 	struct vring_used *vq_used;	/* the "used" ring */
315 
316 };
317 /* as noted above, these are sort of backwards, name-wise */
318 #define VQ_AVAIL_EVENT_IDX(vq) \
319 	(*(uint16_t *)&(vq)->vq_used->ring[(vq)->vq_qsize])
320 #define VQ_USED_EVENT_IDX(vq) \
321 	((vq)->vq_avail->ring[(vq)->vq_qsize])
322 
323 /*
324  * Is this ring ready for I/O?
325  */
326 static inline int
vq_ring_ready(struct vqueue_info * vq)327 vq_ring_ready(struct vqueue_info *vq)
328 {
329 
330 	return (vq->vq_flags & VQ_ALLOC);
331 }
332 
333 /*
334  * Are there "available" descriptors?  (This does not count
335  * how many, just returns True if there are some.)
336  */
337 static inline int
vq_has_descs(struct vqueue_info * vq)338 vq_has_descs(struct vqueue_info *vq)
339 {
340 
341 	return (vq_ring_ready(vq) && vq->vq_last_avail !=
342 	    vq->vq_avail->idx);
343 }
344 
345 /*
346  * Deliver an interrupt to the guest for a specific MSI-X queue or
347  * event.
348  */
349 static inline void
vi_interrupt(struct virtio_softc * vs,uint8_t isr,uint16_t msix_idx)350 vi_interrupt(struct virtio_softc *vs, uint8_t isr, uint16_t msix_idx)
351 {
352 
353 	if (pci_msix_enabled(vs->vs_pi))
354 		pci_generate_msix(vs->vs_pi, msix_idx);
355 	else {
356 #ifndef __FreeBSD__
357 		boolean_t unlock = B_FALSE;
358 
359 		if (vs->vs_mtx && !pthread_mutex_isowned_np(vs->vs_mtx)) {
360 			unlock = B_TRUE;
361 			pthread_mutex_lock(vs->vs_mtx);
362 		}
363 #else
364 		VS_LOCK(vs);
365 #endif
366 		vs->vs_isr |= isr;
367 		pci_generate_msi(vs->vs_pi, 0);
368 		pci_lintr_assert(vs->vs_pi);
369 #ifndef __FreeBSD__
370 		if (unlock)
371 			pthread_mutex_unlock(vs->vs_mtx);
372 #else
373 		VS_UNLOCK(vs);
374 #endif
375 	}
376 }
377 
378 /*
379  * Deliver an interrupt to the guest on the given virtual queue (if
380  * possible, or a generic MSI interrupt if not using MSI-X).
381  */
382 static inline void
vq_interrupt(struct virtio_softc * vs,struct vqueue_info * vq)383 vq_interrupt(struct virtio_softc *vs, struct vqueue_info *vq)
384 {
385 
386 	vi_interrupt(vs, VIRTIO_PCI_ISR_INTR, vq->vq_msix_idx);
387 }
388 
389 static inline void
vq_kick_enable(struct vqueue_info * vq)390 vq_kick_enable(struct vqueue_info *vq)
391 {
392 
393 	vq->vq_used->flags &= ~VRING_USED_F_NO_NOTIFY;
394 	/*
395 	 * Full memory barrier to make sure the store to vq_used->flags
396 	 * happens before the load from vq_avail->idx, which results from a
397 	 * subsequent call to vq_has_descs().
398 	 */
399 	atomic_thread_fence_seq_cst();
400 }
401 
402 static inline void
vq_kick_disable(struct vqueue_info * vq)403 vq_kick_disable(struct vqueue_info *vq)
404 {
405 
406 	vq->vq_used->flags |= VRING_USED_F_NO_NOTIFY;
407 }
408 
409 struct iovec;
410 
411 /*
412  * Request description returned by vq_getchain.
413  *
414  * Writable iovecs start at iov[req.readable].
415  */
416 struct vi_req {
417 	int readable;		/* num of readable iovecs */
418 	int writable;		/* num of writable iovecs */
419 	unsigned int idx;	/* ring index */
420 };
421 
422 void	vi_softc_linkup(struct virtio_softc *vs, struct virtio_consts *vc,
423 			void *dev_softc, struct pci_devinst *pi,
424 			struct vqueue_info *queues);
425 int	vi_intr_init(struct virtio_softc *vs, int barnum, int use_msix);
426 void	vi_reset_dev(struct virtio_softc *);
427 void	vi_set_io_bar(struct virtio_softc *, int);
428 
429 int	vq_getchain(struct vqueue_info *vq, struct iovec *iov, int niov,
430 	    struct vi_req *reqp);
431 void	vq_retchains(struct vqueue_info *vq, uint16_t n_chains);
432 void	vq_relchain_prepare(struct vqueue_info *vq, uint16_t idx,
433 			    uint32_t iolen);
434 void	vq_relchain_publish(struct vqueue_info *vq);
435 void	vq_relchain(struct vqueue_info *vq, uint16_t idx, uint32_t iolen);
436 void	vq_endchains(struct vqueue_info *vq, int used_all_avail);
437 
438 uint64_t vi_pci_read(struct pci_devinst *pi, int baridx, uint64_t offset,
439 	    int size);
440 void	vi_pci_write(struct pci_devinst *pi, int baridx, uint64_t offset,
441 	    int size, uint64_t value);
442 
443 #ifndef __FreeBSD__
444 void	vi_vq_init(struct virtio_softc *, uint32_t);
445 #endif
446 
447 #endif	/* _BHYVE_VIRTIO_H_ */
448