1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #ifndef _NPI_RXDMA_H
27 #define	_NPI_RXDMA_H
28 
29 #ifdef	__cplusplus
30 extern "C" {
31 #endif
32 
33 #include <npi.h>
34 
35 #include "nxge_defs.h"
36 #include "nxge_hw.h"
37 #include <nxge_rxdma_hw.h>
38 
39 /*
40  * Register offset (0x200 bytes for each channel) for receive ring registers.
41  */
42 #define	NXGE_RXDMA_OFFSET(x, v, channel) (x + \
43 		(!v ? DMC_OFFSET(channel) : \
44 		    RDMC_PIOVADDR_OFFSET(channel)))
45 
46 
47 #define	 REG_FZC_RDC_OFFSET(reg, rdc) (reg + RX_LOG_DMA_OFFSET(rdc))
48 
49 #define	 REG_RDC_TABLE_OFFSET(table) \
50 	    (RDC_TBL_REG + table * (NXGE_MAX_RDCS * 8))
51 
52 /*
53  * RX NPI error codes
54  */
55 #define	RXDMA_ER_ST			(RXDMA_BLK_ID << NPI_BLOCK_ID_SHIFT)
56 #define	RXDMA_ID_SHIFT(n)		(n << NPI_PORT_CHAN_SHIFT)
57 
58 
59 #define	NPI_RXDMA_ERROR			RXDMA_ER_ST
60 
61 #define	NPI_RXDMA_SW_PARAM_ERROR	(NPI_RXDMA_ERROR | 0x40)
62 #define	NPI_RXDMA_HW_ERROR	(NPI_RXDMA_ERROR | 0x80)
63 
64 #define	NPI_RXDMA_RDC_INVALID		(NPI_RXDMA_ERROR | CHANNEL_INVALID)
65 #define	NPI_RXDMA_PAGE_INVALID		(NPI_RXDMA_ERROR | LOGICAL_PAGE_INVALID)
66 #define	NPI_RXDMA_RESET_ERR		(NPI_RXDMA_HW_ERROR | RESET_FAILED)
67 #define	NPI_RXDMA_DISABLE_ERR		(NPI_RXDMA_HW_ERROR | 0x0000a)
68 #define	NPI_RXDMA_ENABLE_ERR		(NPI_RXDMA_HW_ERROR | 0x0000b)
69 #define	NPI_RXDMA_FUNC_INVALID		(NPI_RXDMA_SW_PARAM_ERROR | 0x0000a)
70 #define	NPI_RXDMA_BUFSIZE_INVALID	(NPI_RXDMA_SW_PARAM_ERROR | 0x0000b)
71 #define	NPI_RXDMA_RBRSIZE_INVALID	(NPI_RXDMA_SW_PARAM_ERROR | 0x0000c)
72 #define	NPI_RXDMA_RCRSIZE_INVALID	(NPI_RXDMA_SW_PARAM_ERROR | 0x0000d)
73 #define	NPI_RXDMA_PORT_INVALID		(NPI_RXDMA_ERROR | PORT_INVALID)
74 #define	NPI_RXDMA_TABLE_INVALID		(NPI_RXDMA_ERROR | RDC_TAB_INVALID)
75 
76 #define	NPI_RXDMA_CHANNEL_INVALID(n)	(RXDMA_ID_SHIFT(n) |	\
77 					NPI_RXDMA_ERROR | CHANNEL_INVALID)
78 #define	NPI_RXDMA_OPCODE_INVALID(n)	(RXDMA_ID_SHIFT(n) |	\
79 					NPI_RXDMA_ERROR | OPCODE_INVALID)
80 
81 
82 #define	NPI_RXDMA_ERROR_ENCODE(err, rdc)	\
83 	(RXDMA_ID_SHIFT(rdc) | RXDMA_ER_ST | err)
84 
85 
86 #define	RXDMA_CHANNEL_VALID(rdc) \
87 	((rdc < NXGE_MAX_RDCS))
88 
89 #define	RXDMA_PORT_VALID(port) \
90 	((port < MAX_PORTS_PER_NXGE))
91 
92 #define	RXDMA_TABLE_VALID(table) \
93 	((table < NXGE_MAX_RDC_GROUPS))
94 
95 
96 #define	RXDMA_PAGE_VALID(page) \
97 	((page == 0) || (page == 1))
98 
99 #define	RXDMA_BUFF_OFFSET_VALID(offset) \
100 	((offset == SW_OFFSET_NO_OFFSET) || \
101 	    (offset == SW_OFFSET_64) || \
102 	    (offset == SW_OFFSET_128))
103 
104 #define	RXDMA_RF_BUFF_OFFSET_VALID(offset) \
105 	((offset == SW_OFFSET_NO_OFFSET) || \
106 	    (offset == SW_OFFSET_64) || \
107 	    (offset == SW_OFFSET_128) || \
108 	    (offset == SW_OFFSET_192) || \
109 	    (offset == SW_OFFSET_256) || \
110 	    (offset == SW_OFFSET_320) || \
111 	    (offset == SW_OFFSET_384) || \
112 	    (offset == SW_OFFSET_448))
113 
114 
115 #define	RXDMA_RCR_TO_VALID(tov) ((tov) && (tov < 64))
116 #define	RXDMA_RCR_THRESH_VALID(thresh) ((thresh) && (thresh < 512))
117 
118 /*
119  * RXDMA NPI defined control types.
120  */
121 typedef	enum _rxdma_cs_cntl_e {
122 	RXDMA_CS_CLEAR_ALL		= 0x1,
123 	RXDMA_MEX_SET			= 0x2,
124 	RXDMA_RCRTO_CLEAR		= 0x8,
125 	RXDMA_PT_DROP_PKT_CLEAR		= 0x10,
126 	RXDMA_WRED_DROP_CLEAR		= 0x20,
127 	RXDMA_RCR_SFULL_CLEAR		= 0x40,
128 	RXDMA_RCR_FULL_CLEAR		= 0x80,
129 	RXDMA_RBR_PRE_EMPTY_CLEAR	= 0x100,
130 	RXDMA_RBR_EMPTY_CLEAR		= 0x200
131 } rxdma_cs_cntl_t;
132 
133 /*
134  * RXDMA NPI defined event masks (mapped to the hardware defined masks).
135  */
136 typedef	enum _rxdma_ent_msk_cfg_e {
137 	CFG_RXDMA_ENT_MSK_CFIGLOGPGE_MASK = RX_DMA_ENT_MSK_CFIGLOGPGE_MASK,
138 	CFG_RXDMA_ENT_MSK_RBRLOGPGE_MASK  = RX_DMA_ENT_MSK_RBRLOGPGE_MASK,
139 	CFG_RXDMA_ENT_MSK_RBRFULL_MASK	  = RX_DMA_ENT_MSK_RBRFULL_MASK,
140 	CFG_RXDMA_ENT_MSK_RBREMPTY_MASK	  = RX_DMA_ENT_MSK_RBREMPTY_MASK,
141 	CFG_RXDMA_ENT_MSK_RCRFULL_MASK	  = RX_DMA_ENT_MSK_RCRFULL_MASK,
142 	CFG_RXDMA_ENT_MSK_RCRINCON_MASK	  = RX_DMA_ENT_MSK_RCRINCON_MASK,
143 	CFG_RXDMA_ENT_MSK_CONFIG_ERR	  = RX_DMA_ENT_MSK_CONFIG_ERR_MASK,
144 	CFG_RXDMA_ENT_MSK_RCR_SH_FULL_MASK = RX_DMA_ENT_MSK_RCRSH_FULL_MASK,
145 	CFG_RXDMA_ENT_MSK_RBR_PRE_EMTY_MASK = RX_DMA_ENT_MSK_RBR_PRE_EMPTY_MASK,
146 	CFG_RXDMA_ENT_MSK_WRED_DROP_MASK   = RX_DMA_ENT_MSK_WRED_DROP_MASK,
147 	CFG_RXDMA_ENT_MSK_PT_DROP_PKT_MASK = RX_DMA_ENT_MSK_PTDROP_PKT_MASK,
148 	CFG_RXDMA_ENT_MSK_RBR_PRE_PAR_MASK = RX_DMA_ENT_MSK_RBR_PRE_PAR_MASK,
149 	CFG_RXDMA_ENT_MSK_RCR_SHA_PAR_MASK = RX_DMA_ENT_MSK_RCR_SHA_PAR_MASK,
150 	CFG_RXDMA_ENT_MSK_RCRTO_MASK	  = RX_DMA_ENT_MSK_RCRTO_MASK,
151 	CFG_RXDMA_ENT_MSK_THRES_MASK	  = RX_DMA_ENT_MSK_THRES_MASK,
152 	CFG_RXDMA_ENT_MSK_DC_FIFO_ERR_MASK  = RX_DMA_ENT_MSK_DC_FIFO_ERR_MASK,
153 	CFG_RXDMA_ENT_MSK_RCR_ACK_ERR_MASK  = RX_DMA_ENT_MSK_RCR_ACK_ERR_MASK,
154 	CFG_RXDMA_ENT_MSK_RSP_DAT_ERR_MASK  = RX_DMA_ENT_MSK_RSP_DAT_ERR_MASK,
155 	CFG_RXDMA_ENT_MSK_BYTE_EN_BUS_MASK  = RX_DMA_ENT_MSK_BYTE_EN_BUS_MASK,
156 	CFG_RXDMA_ENT_MSK_RSP_CNT_ERR_MASK  = RX_DMA_ENT_MSK_RSP_CNT_ERR_MASK,
157 	CFG_RXDMA_ENT_MSK_RBR_TMOUT_MASK  = RX_DMA_ENT_MSK_RBR_TMOUT_MASK,
158 
159 	CFG_RXDMA_MASK_ALL	  = (RX_DMA_ENT_MSK_CFIGLOGPGE_MASK |
160 					RX_DMA_ENT_MSK_RBRLOGPGE_MASK |
161 					RX_DMA_ENT_MSK_RBRFULL_MASK |
162 					RX_DMA_ENT_MSK_RBREMPTY_MASK |
163 					RX_DMA_ENT_MSK_RCRFULL_MASK |
164 					RX_DMA_ENT_MSK_RCRINCON_MASK |
165 					RX_DMA_ENT_MSK_CONFIG_ERR_MASK |
166 					RX_DMA_ENT_MSK_RCRSH_FULL_MASK |
167 					RX_DMA_ENT_MSK_RBR_PRE_EMPTY_MASK |
168 					RX_DMA_ENT_MSK_WRED_DROP_MASK |
169 					RX_DMA_ENT_MSK_PTDROP_PKT_MASK |
170 					RX_DMA_ENT_MSK_RBR_PRE_PAR_MASK |
171 					RX_DMA_ENT_MSK_RCR_SHA_PAR_MASK |
172 					RX_DMA_ENT_MSK_RCRTO_MASK |
173 					RX_DMA_ENT_MSK_THRES_MASK |
174 					RX_DMA_ENT_MSK_DC_FIFO_ERR_MASK |
175 					RX_DMA_ENT_MSK_RCR_ACK_ERR_MASK |
176 					RX_DMA_ENT_MSK_RSP_DAT_ERR_MASK |
177 					RX_DMA_ENT_MSK_BYTE_EN_BUS_MASK |
178 					RX_DMA_ENT_MSK_RSP_CNT_ERR_MASK |
179 					RX_DMA_ENT_MSK_RBR_TMOUT_MASK)
180 } rxdma_ent_msk_cfg_t;
181 
182 
183 
184 typedef union _addr44 {
185 	uint64_t	addr;
186 	struct {
187 #if defined(_BIG_ENDIAN)
188 		uint32_t rsrvd:20;
189 		uint32_t hdw:12;
190 		uint32_t ldw;
191 #else
192 		uint32_t ldw;
193 		uint32_t hdw:12;
194 		uint32_t rsrvd:20;
195 #endif
196 	} bits;
197 } addr44_t;
198 
199 
200 /*
201  * npi_rxdma_cfg_default_port_rdc()
202  * Set the default rdc for the port
203  *
204  * Inputs:
205  *	handle:		register handle interpreted by the underlying OS
206  *	portnm:		Physical Port Number
207  *	rdc:	RX DMA Channel number
208  *
209  * Return:
210  * NPI_SUCCESS
211  * NPI_RXDMA_RDC_INVALID
212  * NPI_RXDMA_PORT_INVALID
213  *
214  */
215 
216 npi_status_t npi_rxdma_cfg_default_port_rdc(npi_handle_t,
217 				    uint8_t, uint8_t);
218 
219 /*
220  * npi_rxdma_rdc_table_config
221  * Configure/populate the RDC table
222  *
223  * Inputs:
224  *	handle:	register handle interpreted by the underlying OS
225  *	table:	RDC Group Number
226  *	map:	Bitmap of RDCs to be written to <table>.
227  *	count:	A count of the number of bits in <map>.
228  *
229  * Return:
230  * NPI_SUCCESS
231  * NPI_RXDMA_TABLE_INVALID
232  *
233  */
234 
235 npi_status_t npi_rxdma_rdc_table_config(npi_handle_t, uint8_t, dc_map_t,
236     int);
237 
238 npi_status_t npi_rxdma_cfg_rdc_table_default_rdc(npi_handle_t,
239 					    uint8_t, uint8_t);
240 npi_status_t npi_rxdma_cfg_rdc_rcr_timeout_disable(npi_handle_t,
241 					    uint8_t);
242 
243 
244 /*
245  * npi_rxdma_32bitmode_enable()
246  * Enable 32 bit mode
247  *
248  * Inputs:
249  *	handle:		register handle interpreted by the underlying OS
250  *
251  * Return:
252  * NPI_SUCCESS
253  * NPI_FAILURE
254  * NPI_HW_ERR
255  *
256  */
257 
258 npi_status_t npi_rxdma_cfg_32bitmode_enable(npi_handle_t);
259 
260 
261 /*
262  * npi_rxdma_32bitmode_disable()
263  * disable 32 bit mode
264  *
265  * Inputs:
266  *	handle:		register handle interpreted by the underlying OS
267  *
268  * Return:
269  * NPI_SUCCESS
270  * NPI_FAILURE
271  * NPI_HW_ERR
272  *
273  */
274 
275 
276 npi_status_t npi_rxdma_cfg_32bitmode_disable(npi_handle_t);
277 
278 /*
279  * npi_rxdma_cfg_ram_access_enable()
280  * Enable PIO access to shadow and prefetch memory.
281  * In the case of DMA errors, software may need to
282  * initialize the shadow and prefetch memories to
283  * sane value (may be clear it) before re-enabling
284  * the DMA channel.
285  *
286  * Inputs:
287  *	handle:		register handle interpreted by the underlying OS
288  *
289  * Return:
290  * NPI_SUCCESS
291  * NPI_FAILURE
292  * NPI_HW_ERR
293  *
294  */
295 
296 npi_status_t npi_rxdma_cfg_ram_access_enable(npi_handle_t);
297 
298 
299 /*
300  * npi_rxdma_cfg_ram_access_disable()
301  * Disable PIO access to shadow and prefetch memory.
302  * This is the normal operation mode.
303  *
304  * Inputs:
305  *	handle:		register handle interpreted by the underlying OS
306  *
307  * Return:
308  * NPI_SUCCESS
309  * NPI_FAILURE
310  * NPI_HW_ERR
311  *
312  */
313 
314 npi_status_t npi_rxdma_cfg_ram_access_disable(npi_handle_t);
315 
316 
317 /*
318  * npi_rxdma_cfg_clock_div_set()
319  * init the clock division, used for RX timers
320  * This determines the granularity of RX DMA countdown timers
321  * It depends on the system clock. For example if the system
322  * clock is 300 MHz, a value of 30000 will yield a granularity
323  * of 100usec.
324  *
325  * Inputs:
326  *	handle:		register handle interpreted by the underlying OS
327  *	count:		System clock divider
328  *
329  * Return:
330  * NPI_SUCCESS
331  * NPI_FAILURE
332  * NPI_SW_ERR
333  * NPI_HW_ERR
334  *
335  */
336 
337 npi_status_t npi_rxdma_cfg_clock_div_set(npi_handle_t, uint16_t);
338 
339 /*
340  * npi_rxdma_cfg_red_rand_init()
341  * init the WRED Discard
342  * By default, it is enabled
343  *
344  * Inputs:
345  *	handle:		register handle interpreted by the underlying OS
346  *	init_value:	WRED init value
347  *
348  * Return:
349  * NPI_SUCCESS
350  * NPI_FAILURE
351  * NPI_SW_ERR
352  * NPI_HW_ERR
353  *
354  */
355 
356 npi_status_t npi_rxdma_cfg_red_rand_init(npi_handle_t, uint16_t);
357 
358 /*
359  * npi_rxdma_cfg_wred_disable()
360  * init the WRED Discard
361  * By default, it is enabled
362  *
363  * Inputs:
364  *	handle:		register handle interpreted by the underlying OS
365  *
366  * Return:
367  * NPI_SUCCESS
368  * NPI_FAILURE
369  * NPI_SW_ERR
370  * NPI_HW_ERR
371  *
372  */
373 
374 
375 npi_status_t npi_rxdma_cfg_wred_disable(npi_handle_t);
376 
377 /*
378  * npi_rxdma_cfg_wred_param()
379  * COnfigure per rxdma channel WRED parameters
380  * By default, it is enabled
381  *
382  * Inputs:
383  *	handle:		register handle interpreted by the underlying OS
384  *	rdc:	RX DMA Channel number
385  *	wred_params:	WRED configuration parameters
386  *
387  * Return:
388  * NPI_SUCCESS
389  * NPI_FAILURE
390  * NPI_SW_ERR
391  * NPI_HW_ERR
392  *
393  */
394 
395 
396 
397 npi_status_t npi_rxdma_cfg_wred_param(npi_handle_t, uint8_t,
398 				    rdc_red_para_t *);
399 
400 
401 /*
402  * npi_rxdma_port_ddr_weight
403  * Set the DDR weight for a port.
404  *
405  * Inputs:
406  *	handle:		register handle interpreted by the underlying OS
407  *	portnm:		Physical Port Number
408  *	weight:		Port relative weight (in approx. bytes)
409  *			Default values are:
410  *			0x400 (port 0 and 1) corresponding to 10 standard
411  *			      size (1500 bytes) Frames
412  *			0x66 (port 2 and 3) corresponding to 10% 10Gig ports
413  *
414  * Return:
415  * NPI_SUCCESS
416  * NPI_FAILURE
417  * NPI_HW_ERR
418  * NPI_SW_ERR
419  *
420  */
421 
422 npi_status_t npi_rxdma_cfg_port_ddr_weight(npi_handle_t,
423 				    uint8_t, uint32_t);
424 
425 
426 /*
427  * npi_rxdma_port_usage_get()
428  * Gets the port usage, in terms of 16 byte blocks
429  *
430  * NOTE: The register count is cleared upon reading.
431  *
432  * Inputs:
433  *	handle:		register handle interpreted by the underlying OS
434  *	portnm:		Physical Port Number
435  *	blocks:		ptr to save current count.
436  *
437  * Return:
438  * NPI_SUCCESS
439  * NPI_FAILURE
440  * NPI_HW_ERR
441  * NPI_SW_ERR
442  *
443  */
444 
445 npi_status_t npi_rxdma_port_usage_get(npi_handle_t,
446 				    uint8_t, uint32_t *);
447 
448 
449 /*
450  * npi_rxdma_cfg_logical_page()
451  * Configure per rxdma channel Logical page
452  *
453  * To disable the logical page, set valid = 0;
454  *
455  * Inputs:
456  *	handle:		register handle interpreted by the underlying OS
457  *	rdc:		RX DMA Channel number
458  *	page_params:	Logical Page configuration parameters
459  *
460  * Return:
461  * NPI_SUCCESS
462  * NPI_FAILURE
463  * NPI_SW_ERR
464  * NPI_HW_ERR
465  *
466  */
467 
468 
469 
470 npi_status_t npi_rxdma_cfg_logical_page(npi_handle_t, uint8_t,
471 				    dma_log_page_t *);
472 
473 
474 /*
475  * npi_rxdma_cfg_logical_page_handle()
476  * Configure per rxdma channel Logical page handle
477  *
478  *
479  * Inputs:
480  *	handle:		register handle interpreted by the underlying OS
481  *	rdc:		RX DMA Channel number
482  *	pg_handle:	Logical Page handle
483  *
484  * Return:
485  * NPI_SUCCESS
486  * NPI_FAILURE
487  * NPI_SW_ERR
488  * NPI_HW_ERR
489  *
490  */
491 
492 
493 npi_status_t npi_rxdma_cfg_logical_page_handle(npi_handle_t, uint8_t,
494 				    uint64_t);
495 
496 
497 
498 
499 npi_status_t npi_rxdma_cfg_logical_page_disable(npi_handle_t,
500 				    uint8_t, uint8_t);
501 
502 typedef enum _bsize {
503 	SIZE_0B = 0x0,
504 	SIZE_64B,
505 	SIZE_128B,
506 	SIZE_192B,
507 	SIZE_256B,
508 	SIZE_512B,
509 	SIZE_1KB,
510 	SIZE_2KB,
511 	SIZE_4KB,
512 	SIZE_8KB,
513 	SIZE_16KB,
514 	SIZE_32KB
515 } bsize_t;
516 
517 
518 
519 /*
520  * npi_rxdma_cfg_rdc_ring()
521  * Configure The RDC channel Rcv Buffer Ring
522  *
523  * Inputs:
524  *	rdc:		RX DMA Channel number
525  *	rdc_params:	RDC configuration parameters
526  *
527  * Return:
528  * NPI_SUCCESS
529  * NPI_FAILURE
530  * NPI_SW_ERR
531  * NPI_HW_ERR
532  *
533  */
534 
535 typedef struct _rdc_desc_cfg_t {
536 	uint8_t mbox_enable;	/* Enable full (18b) header */
537 	uint8_t full_hdr;	/* Enable full (18b) header */
538 	uint8_t offset;	/* 64 byte offsets */
539 	uint8_t valid2;	/* size 2 is valid */
540 	bsize_t size2;	/* Size 2 length */
541 	uint8_t valid1;	/* size 1 is valid */
542 	bsize_t size1;	/* Size 1 length */
543 	uint8_t valid0;	/* size 0 is valid */
544 	bsize_t size0;	/* Size 1 length */
545 	bsize_t page_size;   /* Page or buffer Size */
546     uint8_t	rcr_timeout_enable;
547     uint8_t	rcr_timeout;
548     uint16_t	rcr_threshold;
549 	uint16_t rcr_len;	   /* RBR Descriptor size (entries) */
550 	uint16_t rbr_len;	   /* RBR Descriptor size (entries) */
551 	uint64_t mbox_addr;	   /* Mailbox Address */
552 	uint64_t rcr_addr;	   /* RCR Address */
553 	uint64_t rbr_addr;	   /* RBB Address */
554 } rdc_desc_cfg_t;
555 
556 
557 
558 npi_status_t npi_rxdma_cfg_rdc_ring(npi_handle_t, uint8_t,
559 				    rdc_desc_cfg_t *, boolean_t);
560 
561 
562 
563 
564 /*
565  * npi_rxdma_rdc_rcr_flush
566  * Forces RX completion ring update
567  *
568  * Inputs:
569  *	rdc:		RX DMA Channel number
570  *
571  * Return:
572  *
573  */
574 
575 #define	npi_rxdma_rdc_rcr_flush(handle, rdc) \
576 	RXDMA_REG_WRITE64(handle, RCR_FLSH_REG, rdc, \
577 		    (RCR_FLSH_SET << RCR_FLSH_SHIFT))
578 
579 
580 
581 /*
582  * npi_rxdma_rdc_rcr_read_update
583  * Update the number of rcr packets and buffers processed
584  *
585  * Inputs:
586  *	channel:	RX DMA Channel number
587  *	num_pkts:	Number of pkts processed by SW.
588  *			    A packet could constitute multiple
589  *			    buffers, in case jumbo packets.
590  *	num_bufs:	Number of buffer processed by SW.
591  *
592  * Return:
593  *	NPI_FAILURE		-
594  *		NPI_RXDMA_OPCODE_INVALID	-
595  *		NPI_RXDMA_CHANNEL_INVALID	-
596  *
597  */
598 
599 npi_status_t npi_rxdma_rdc_rcr_read_update(npi_handle_t, uint8_t,
600 				    uint16_t, uint16_t);
601 /*
602  * npi_rxdma_rdc_rcr_pktread_update
603  * Update the number of packets processed
604  *
605  * Inputs:
606  *	channel:	RX DMA Channel number
607  *	num_pkts:	Number ofpkts processed by SW.
608  *			A packet could constitute multiple
609  *			buffers, in case jumbo packets.
610  *
611  * Return:
612  *	NPI_FAILURE		-
613  *		NPI_RXDMA_OPCODE_INVALID	-
614  *		NPI_RXDMA_CHANNEL_INVALID	-
615  *
616  */
617 
618 npi_status_t npi_rxdma_rdc_rcr_pktread_update(npi_handle_t,
619 					uint8_t, uint16_t);
620 
621 
622 
623 /*
624  * npi_rxdma_rdc_rcr_bufread_update
625  * Update the number of buffers processed
626  *
627  * Inputs:
628  *	channel:		RX DMA Channel number
629  *	num_bufs:	Number of buffer processed by SW. Multiple buffers
630  *   could be part of a single packet.
631  *
632  * Return:
633  *	NPI_FAILURE		-
634  *		NPI_RXDMA_OPCODE_INVALID	-
635  *		NPI_RXDMA_CHANNEL_INVALID	-
636  *
637  */
638 
639 npi_status_t npi_rxdma_rdc_rcr_bufread_update(npi_handle_t,
640 					uint8_t, uint16_t);
641 
642 
643 
644 /*
645  * npi_rxdma_rdc_rbr_kick
646  * Kick RDC RBR
647  *
648  * Inputs:
649  *	rdc:		RX DMA Channel number
650  *	num_buffers:	Number of Buffers posted to the RBR
651  *
652  * Return:
653  *
654  */
655 
656 #define	npi_rxdma_rdc_rbr_kick(handle, rdc, num_buffers) \
657 	RXDMA_REG_WRITE64(handle, RBR_KICK_REG, rdc, num_buffers)
658 
659 
660 /*
661  * npi_rxdma_rdc_rbr_head_get
662  * Gets the current rbr head pointer.
663  *
664  * Inputs:
665  *	rdc:		RX DMA Channel number
666  *	hdptr		ptr to write the rbr head value
667  *
668  * Return:
669  *
670  */
671 
672 npi_status_t npi_rxdma_rdc_rbr_head_get(npi_handle_t,
673 				    uint8_t, addr44_t  *);
674 
675 
676 
677 /*
678  * npi_rxdma_rdc_rbr_stat_get
679  * Returns the RBR stat. The stat consists of the
680  * RX buffers in the ring. It also indicates if there
681  * has been an overflow.
682  *
683  * Inputs:
684  *	rdc:		RX DMA Channel number
685  *	rbr_stat_t:	Structure to update stat
686  *
687  * Return:
688  *
689  */
690 
691 npi_status_t npi_rxdma_rdc_rbr_stat_get(npi_handle_t, uint8_t,
692 				    rbr_stat_t *);
693 
694 
695 
696 /*
697  * npi_rxdma_cfg_rdc_reset
698  * Resets the RDC channel
699  *
700  * Inputs:
701  *	rdc:		RX DMA Channel number
702  *
703  * Return:
704  *
705  */
706 
707 npi_status_t npi_rxdma_cfg_rdc_reset(npi_handle_t, uint8_t);
708 
709 
710 /*
711  * npi_rxdma_rdc_enable
712  * Enables the RDC channel
713  *
714  * Inputs:
715  *	rdc:		RX DMA Channel number
716  *
717  * Return:
718  *
719  */
720 
721 npi_status_t npi_rxdma_cfg_rdc_enable(npi_handle_t, uint8_t);
722 
723 /*
724  * npi_rxdma_rdc_disable
725  * Disables the RDC channel
726  *
727  * Inputs:
728  *	rdc:		RX DMA Channel number
729  *
730  * Return:
731  *
732  */
733 
734 npi_status_t npi_rxdma_cfg_rdc_disable(npi_handle_t, uint8_t);
735 
736 
737 /*
738  * npi_rxdma_cfg_rdc_rcr_timeout()
739  * Configure The RDC channel completion ring timeout.
740  * If a frame has been received, an event would be
741  * generated atleast at the expiration of the timeout.
742  *
743  * Enables timeout by default.
744  *
745  * Inputs:
746  *	rdc:		RX DMA Channel number
747  *	rcr_timeout:	Completion Ring timeout value
748  *
749  * Return:
750  * NPI_SUCCESS
751  * NPI_FAILURE
752  * NPI_SW_ERR
753  * NPI_HW_ERR
754  *
755  */
756 
757 npi_status_t npi_rxdma_cfg_rdc_rcr_timeout(npi_handle_t, uint8_t,
758 				    uint8_t);
759 
760 
761 /*
762  * npi_rxdma_cfg_rdc_rcr_threshold()
763  * Configure The RDC channel completion ring threshold.
764  * An event would be If the number of frame received,
765  * surpasses the threshold value
766  *
767  * Inputs:
768  *	rdc:		RX DMA Channel number
769  *	rcr_threshold:	Completion Ring Threshold count
770  *
771  * Return:
772  * NPI_SUCCESS
773  * NPI_FAILURE
774  * NPI_SW_ERR
775  * NPI_HW_ERR
776  *
777  */
778 
779 npi_status_t npi_rxdma_cfg_rdc_rcr_threshold(npi_handle_t, uint8_t,
780 				    uint16_t);
781 
782 
783 npi_status_t npi_rxdma_cfg_rdc_rcr_timeout_disable(npi_handle_t, uint8_t);
784 
785 typedef struct _rdc_error_stat_t {
786 	uint8_t fault:1;
787     uint8_t	multi_fault:1;
788     uint8_t	rbr_fault:1;
789     uint8_t	buff_fault:1;
790     uint8_t	rcr_fault:1;
791 	addr44_t fault_addr;
792 } rdc_error_stat_t;
793 
794 #if OLD
795 /*
796  * npi_rxdma_rdc_error_stat_get
797  * Gets the current Error stat for the RDC.
798  *
799  * Inputs:
800  *	rdc:		RX DMA Channel number
801  *	error_stat	Structure to write current RDC Error stat
802  *
803  * Return:
804  *
805  */
806 
807 npi_status_t npi_rxdma_rdc_error_stat_get(npi_handle_t,
808 				    uint8_t, rdc_error_stat_t *);
809 
810 #endif
811 
812 /*
813  * npi_rxdma_rdc_rcr_tail_get
814  * Gets the current RCR tail address for the RDC.
815  *
816  * Inputs:
817  *	rdc:		RX DMA Channel number
818  *	tail_addr	Structure to write current RDC RCR tail address
819  *
820  * Return:
821  *
822  */
823 
824 npi_status_t npi_rxdma_rdc_rcr_tail_get(npi_handle_t,
825 				    uint8_t, addr44_t *);
826 
827 
828 npi_status_t npi_rxdma_rdc_rcr_qlen_get(npi_handle_t,
829 				    uint8_t, uint16_t *);
830 
831 
832 
833 typedef struct _rdc_discard_stat_t {
834     uint8_t	nobuf_ovflow;
835     uint8_t	red_ovflow;
836     uint32_t	nobuf_discard;
837     uint32_t	red_discard;
838 } rdc_discard_stat_t;
839 
840 
841 /*
842  * npi_rxdma_rdc_discard_stat_get
843  * Gets the current discrad stats for the RDC.
844  *
845  * Inputs:
846  *	rdc:		RX DMA Channel number
847  *	rcr_stat	Structure to write current RDC discard stat
848  *
849  * Return:
850  *
851  */
852 
853 npi_status_t npi_rxdma_rdc_discard_stat_get(npi_handle_t,
854 				    uint8_t, rdc_discard_stat_t);
855 
856 
857 /*
858  * npi_rx_port_discard_stat_get
859  * Gets the current input (IPP) discrad stats for the rx port.
860  *
861  * Inputs:
862  *	rdc:		RX DMA Channel number
863  *	rx_disc_cnt_t	Structure to write current RDC discard stat
864  *
865  * Return:
866  *
867  */
868 
869 npi_status_t npi_rx_port_discard_stat_get(npi_handle_t,
870 				    uint8_t,
871 				    rx_disc_cnt_t *);
872 
873 
874 /*
875  * npi_rxdma_red_discard_stat_get
876  * Gets the current discrad count due RED
877  * The counter overflow bit is cleared, if it has been set.
878  *
879  * Inputs:
880  *	rdc:		RX DMA Channel number
881  *	rx_disc_cnt_t	Structure to write current RDC discard stat
882  *
883  * Return:
884  * NPI_SUCCESS
885  * NPI_RXDMA_RDC_INVALID
886  *
887  */
888 
889 npi_status_t npi_rxdma_red_discard_stat_get(npi_handle_t, uint8_t,
890 				    rx_disc_cnt_t *);
891 
892 
893 
894 /*
895  * npi_rxdma_red_discard_oflow_clear
896  * Clear RED discard counter overflow bit
897  *
898  * Inputs:
899  *	rdc:		RX DMA Channel number
900  *
901  * Return:
902  * NPI_SUCCESS
903  * NPI_RXDMA_RDC_INVALID
904  *
905  */
906 
907 npi_status_t npi_rxdma_red_discard_oflow_clear(npi_handle_t,
908 					uint8_t);
909 
910 
911 
912 
913 /*
914  * npi_rxdma_misc_discard_stat_get
915  * Gets the current discrad count for the rdc due to
916  * buffer pool empty
917  * The counter overflow bit is cleared, if it has been set.
918  *
919  * Inputs:
920  *	rdc:		RX DMA Channel number
921  *	rx_disc_cnt_t	Structure to write current RDC discard stat
922  *
923  * Return:
924  * NPI_SUCCESS
925  * NPI_RXDMA_RDC_INVALID
926  *
927  */
928 
929 npi_status_t npi_rxdma_misc_discard_stat_get(npi_handle_t, uint8_t,
930 				    rx_disc_cnt_t *);
931 
932 
933 
934 /*
935  * npi_rxdma_red_discard_oflow_clear
936  * Clear RED discard counter overflow bit
937  * clear the overflow bit for  buffer pool empty discrad counter
938  * for the rdc
939  *
940  *
941  * Inputs:
942  *	rdc:		RX DMA Channel number
943  *
944  * Return:
945  * NPI_SUCCESS
946  * NPI_RXDMA_RDC_INVALID
947  *
948  */
949 
950 npi_status_t npi_rxdma_misc_discard_oflow_clear(npi_handle_t,
951 					uint8_t);
952 
953 
954 
955 /*
956  * npi_rxdma_ring_perr_stat_get
957  * Gets the current RDC Memory parity error
958  * The counter overflow bit is cleared, if it has been set.
959  *
960  * Inputs:
961  * pre_cnt:	Structure to write current RDC Prefetch memory
962  *		Parity Error stat
963  * sha_cnt:	Structure to write current RDC Shadow memory
964  *		Parity Error stat
965  *
966  * Return:
967  * NPI_SUCCESS
968  * NPI_RXDMA_RDC_INVALID
969  *
970  */
971 
972 npi_status_t npi_rxdma_ring_perr_stat_get(npi_handle_t,
973 				    rdmc_par_err_log_t *,
974 				    rdmc_par_err_log_t *);
975 
976 
977 /*
978  * npi_rxdma_ring_perr_stat_get
979  * Clear RDC Memory Parity Error counter overflow bits
980  *
981  * Inputs:
982  * Return:
983  * NPI_SUCCESS
984  *
985  */
986 
987 npi_status_t npi_rxdma_ring_perr_stat_clear(npi_handle_t);
988 
989 
990 /* Access the RDMC Memory: used for debugging */
991 
992 npi_status_t npi_rxdma_rdmc_memory_io(npi_handle_t,
993 			    rdmc_mem_access_t *, uint8_t);
994 
995 
996 
997 /*
998  * npi_rxdma_rxctl_fifo_error_intr_set
999  * Configure The RX ctrl fifo error interrupt generation
1000  *
1001  * Inputs:
1002  *	mask:	rx_ctl_dat_fifo_mask_t specifying the errors
1003  *
1004  * Return:
1005  * NPI_SUCCESS
1006  * NPI_FAILURE
1007  *
1008  */
1009 
1010 npi_status_t npi_rxdma_rxctl_fifo_error_intr_set(npi_handle_t,
1011 				    rx_ctl_dat_fifo_mask_t *);
1012 
1013 /*
1014  * npi_rxdma_rxctl_fifo_error_status_get
1015  * Read The RX ctrl fifo error Status
1016  *
1017  * Inputs:
1018  *	stat:	rx_ctl_dat_fifo_stat_t to read the errors to
1019  * valid fields in  rx_ctl_dat_fifo_stat_t structure are:
1020  * zcp_eop_err, ipp_eop_err, id_mismatch.
1021  * Return:
1022  * NPI_SUCCESS
1023  * NPI_FAILURE
1024  *
1025  */
1026 
1027 npi_status_t npi_rxdma_rxctl_fifo_error_status_get(npi_handle_t,
1028 				    rx_ctl_dat_fifo_stat_t *);
1029 
1030 
1031 /*
1032  * npi_rxdma_channel_mex_set():
1033  *	This function is called to arm the DMA channel with
1034  *	mailbox updating capability. Software needs to rearm
1035  *	for each update by writing to the control and status register.
1036  *
1037  * Parameters:
1038  *	handle		- NPI handle (virtualization flag must be defined).
1039  *	channel		- logical RXDMA channel from 0 to 23.
1040  *			  (If virtualization flag is not set, then
1041  *			   logical channel is the same as the hardware
1042  *			   channel number).
1043  *
1044  * Return:
1045  *	NPI_SUCCESS		- If enable channel with mailbox update
1046  *				  is complete successfully.
1047  *
1048  *	Error:
1049  *	NPI_FAILURE	-
1050  *		NPI_RXDMA_CHANNEL_INVALID -
1051  */
1052 npi_status_t npi_rxdma_channel_mex_set(npi_handle_t, uint8_t);
1053 
1054 /*
1055  * npi_rxdma_channel_rcrto_clear():
1056  *	This function is called to reset RCRTO bit to 0.
1057  *
1058  * Parameters:
1059  *	handle		- NPI handle (virtualization flag must be defined).
1060  *	channel		- logical RXDMA channel from 0 to 23.
1061  *			  (If virtualization flag is not set, then
1062  *			   logical channel is the same as the hardware
1063  *			   channel number).
1064  * Return:
1065  *	NPI_SUCCESS
1066  *
1067  *	Error:
1068  *	NPI_FAILURE	-
1069  *		NPI_RXDMA_CHANNEL_INVALID -
1070  */
1071 npi_status_t npi_rxdma_channel_rcrto_clear(npi_handle_t, uint8_t);
1072 
1073 /*
1074  * npi_rxdma_channel_pt_drop_pkt_clear():
1075  *	This function is called to clear the port drop packet bit (debug).
1076  *
1077  * Parameters:
1078  *	handle		- NPI handle (virtualization flag must be defined).
1079  *	channel		- logical RXDMA channel from 0 to 23.
1080  *			  (If virtualization flag is not set, then
1081  *			   logical channel is the same as the hardware
1082  *			   channel number).
1083  * Return:
1084  *	NPI_SUCCESS
1085  *
1086  *	Error:
1087  *	NPI_FAILURE	-
1088  *		NPI_RXDMA_CHANNEL_INVALID -
1089  */
1090 npi_status_t npi_rxdma_channel_pt_drop_pkt_clear(npi_handle_t, uint8_t);
1091 
1092 /*
1093  * npi_rxdma_channel_wred_drop_clear():
1094  *	This function is called to wred drop bit (debug only).
1095  *
1096  * Parameters:
1097  *	handle		- NPI handle (virtualization flag must be defined).
1098  *	channel		- logical RXDMA channel from 0 to 23.
1099  *			  (If virtualization flag is not set, then
1100  *			   logical channel is the same as the hardware
1101  *			   channel number).
1102  * Return:
1103  *	NPI_SUCCESS
1104  *
1105  *	Error:
1106  *	NPI_FAILURE	-
1107  *		NPI_RXDMA_CHANNEL_INVALID -
1108  */
1109 npi_status_t npi_rxdma_channel_wred_drop_clear(npi_handle_t, uint8_t);
1110 
1111 /*
1112  * npi_rxdma_channel_rcr_shfull_clear():
1113  *	This function is called to clear RCR shadow full bit.
1114  *
1115  * Parameters:
1116  *	handle		- NPI handle (virtualization flag must be defined).
1117  *	channel		- logical RXDMA channel from 0 to 23.
1118  *			  (If virtualization flag is not set, then
1119  *			   logical channel is the same as the hardware
1120  *			   channel number).
1121  * Return:
1122  *	NPI_SUCCESS
1123  *
1124  *	Error:
1125  *	NPI_FAILURE	-
1126  *		NPI_RXDMA_CHANNEL_INVALID -
1127  */
1128 npi_status_t npi_rxdma_channel_rcr_shfull_clear(npi_handle_t, uint8_t);
1129 
1130 /*
1131  * npi_rxdma_channel_rcrfull_clear():
1132  *	This function is called to clear RCR full bit.
1133  *
1134  * Parameters:
1135  *	handle		- NPI handle (virtualization flag must be defined).
1136  *	channel		- logical RXDMA channel from 0 to 23.
1137  *			  (If virtualization flag is not set, then
1138  *			   logical channel is the same as the hardware
1139  *			   channel number).
1140  * Return:
1141  *	NPI_SUCCESS
1142  *
1143  *	Error:
1144  *	NPI_FAILURE	-
1145  *		NPI_RXDMA_CHANNEL_INVALID -
1146  */
1147 npi_status_t npi_rxdma_channel_rcrfull_clear(npi_handle_t, uint8_t);
1148 
1149 /*
1150  * npi_rxdma_rbr_pre_empty_clear():
1151  *	This function is called to control a receive DMA channel
1152  *	for arming the channel with mailbox updates, resetting
1153  *	various event status bits (control and status register).
1154  *
1155  * Parameters:
1156  *	handle		- NPI handle (virtualization flag must be defined).
1157  *	control		- NPI defined control type supported:
1158  *				- RXDMA_MEX_SET
1159  * 				- RXDMA_RCRTO_CLEAR
1160  *				- RXDMA_PT_DROP_PKT_CLEAR
1161  *				- RXDMA_WRED_DROP_CLEAR
1162  *				- RXDMA_RCR_SFULL_CLEAR
1163  *				- RXDMA_RCR_FULL_CLEAR
1164  *				- RXDMA_RBR_PRE_EMPTY_CLEAR
1165  *	channel		- logical RXDMA channel from 0 to 23.
1166  *			  (If virtualization flag is not set, then
1167  *			   logical channel is the same as the hardware.
1168  * Return:
1169  *	NPI_SUCCESS
1170  *
1171  *	Error:
1172  *	NPI_FAILURE		-
1173  *		NPI_RXDMA_CHANNEL_INVALID -
1174  */
1175 npi_status_t npi_rxdma_channel_rbr_pre_empty_clear(npi_handle_t, uint8_t);
1176 
1177 /*
1178  * npi_rxdma_channel_control():
1179  *	This function is called to control a receive DMA channel
1180  *	for arming the channel with mailbox updates, resetting
1181  *	various event status bits (control and status register).
1182  *
1183  * Parameters:
1184  *	handle		- NPI handle (virtualization flag must be defined).
1185  *	control		- NPI defined control type supported:
1186  *				- RXDMA_MEX_SET
1187  * 				- RXDMA_RCRTO_CLEAR
1188  *				- RXDMA_PT_DROP_PKT_CLEAR
1189  *				- RXDMA_WRED_DROP_CLEAR
1190  *				- RXDMA_RCR_SFULL_CLEAR
1191  *				- RXDMA_RCR_FULL_CLEAR
1192  *				- RXDMA_RBR_PRE_EMPTY_CLEAR
1193  *	channel		- logical RXDMA channel from 0 to 23.
1194  *			  (If virtualization flag is not set, then
1195  *			   logical channel is the same as the hardware.
1196  * Return:
1197  *	NPI_SUCCESS
1198  *
1199  *	Error:
1200  *	NPI_FAILURE		-
1201  *		NPI_TXDMA_OPCODE_INVALID	-
1202  *		NPI_TXDMA_CHANNEL_INVALID	-
1203  */
1204 npi_status_t npi_rxdma_channel_control(npi_handle_t,
1205 				rxdma_cs_cntl_t, uint8_t);
1206 
1207 /*
1208  * npi_rxdma_control_status():
1209  *	This function is called to operate on the control
1210  *	and status register.
1211  *
1212  * Parameters:
1213  *	handle		- NPI handle
1214  *	op_mode		- OP_GET: get hardware control and status
1215  *			  OP_SET: set hardware control and status
1216  *			  OP_UPDATE: update hardware control and status.
1217  *			  OP_CLEAR: clear control and status register to 0s.
1218  *	channel		- hardware RXDMA channel from 0 to 23.
1219  *	cs_p		- pointer to hardware defined control and status
1220  *			  structure.
1221  * Return:
1222  *	NPI_SUCCESS
1223  *
1224  *	Error:
1225  *	NPI_FAILURE		-
1226  *		NPI_RXDMA_OPCODE_INVALID	-
1227  *		NPI_RXDMA_CHANNEL_INVALID	-
1228  */
1229 npi_status_t npi_rxdma_control_status(npi_handle_t, io_op_t,
1230 			uint8_t, p_rx_dma_ctl_stat_t);
1231 
1232 /*
1233  * npi_rxdma_event_mask():
1234  *	This function is called to operate on the event mask
1235  *	register which is used for generating interrupts.
1236  *
1237  * Parameters:
1238  *	handle		- NPI handle
1239  *	op_mode		- OP_GET: get hardware event mask
1240  *			  OP_SET: set hardware interrupt event masks
1241  *			  OP_CLEAR: clear control and status register to 0s.
1242  *	channel		- hardware RXDMA channel from 0 to 23.
1243  *	mask_p		- pointer to hardware defined event mask
1244  *			  structure.
1245  * Return:
1246  *	NPI_SUCCESS		- If set is complete successfully.
1247  *
1248  *	Error:
1249  *	NPI_FAILURE		-
1250  *		NPI_RXDMA_OPCODE_INVALID	-
1251  *		NPI_RXDMA_CHANNEL_INVALID	-
1252  */
1253 npi_status_t npi_rxdma_event_mask(npi_handle_t, io_op_t,
1254 		uint8_t, p_rx_dma_ent_msk_t);
1255 
1256 /*
1257  * npi_rxdma_event_mask_config():
1258  *	This function is called to operate on the event mask
1259  *	register which is used for generating interrupts
1260  *	and status register.
1261  *
1262  * Parameters:
1263  *	handle		- NPI handle
1264  *	op_mode		- OP_GET: get hardware event mask
1265  *			  OP_SET: set hardware interrupt event masks
1266  *			  OP_CLEAR: clear control and status register to 0s.
1267  *	channel		- hardware RXDMA channel from 0 to 23.
1268  *	cfgp		- pointer to NPI defined event mask
1269  *			  enum data type.
1270  * Return:
1271  *	NPI_SUCCESS		- If set is complete successfully.
1272  *
1273  *	Error:
1274  *	NPI_FAILURE		-
1275  *		NPI_RXDMA_OPCODE_INVALID	-
1276  *		NPI_RXDMA_CHANNEL_INVALID	-
1277  */
1278 npi_status_t npi_rxdma_event_mask_config(npi_handle_t, io_op_t,
1279 		uint8_t, rxdma_ent_msk_cfg_t *);
1280 
1281 
1282 /*
1283  * npi_rxdma_dump_rdc_regs
1284  * Dumps the contents of rdc csrs and fzc registers
1285  *
1286  * Input:
1287  *         rdc:      RX DMA number
1288  *
1289  * return:
1290  *     NPI_SUCCESS
1291  *     NPI_FAILURE
1292  *     NPI_RXDMA_RDC_INVALID
1293  *
1294  */
1295 
1296 npi_status_t npi_rxdma_dump_rdc_regs(npi_handle_t, uint8_t);
1297 
1298 
1299 /*
1300  * npi_rxdma_dump_fzc_regs
1301  * Dumps the contents of rdc csrs and fzc registers
1302  *
1303  * Input:
1304  *         rdc:      RX DMA number
1305  *
1306  * return:
1307  *     NPI_SUCCESS
1308  *     NPI_FAILURE
1309  *     NPI_RXDMA_RDC_INVALID
1310  *
1311  */
1312 
1313 npi_status_t npi_rxdma_dump_fzc_regs(npi_handle_t);
1314 
1315 npi_status_t npi_rxdma_channel_rbr_empty_clear(npi_handle_t,
1316 							uint8_t);
1317 npi_status_t npi_rxdma_rxctl_fifo_error_intr_get(npi_handle_t,
1318 				rx_ctl_dat_fifo_stat_t *);
1319 
1320 npi_status_t npi_rxdma_rxctl_fifo_error_intr_set(npi_handle_t,
1321 				rx_ctl_dat_fifo_mask_t *);
1322 
1323 npi_status_t npi_rxdma_dump_rdc_table(npi_handle_t, uint8_t);
1324 #ifdef	__cplusplus
1325 }
1326 #endif
1327 
1328 #endif	/* _NPI_RXDMA_H */
1329