1 /*******************************************************************************
2 
3 
4   Copyright(c) 1999 - 2003 Intel Corporation. All rights reserved.
5 
6   This program is free software; you can redistribute it and/or modify it
7   under the terms of the GNU General Public License as published by the Free
8   Software Foundation; either version 2 of the License, or (at your option)
9   any later version.
10 
11   This program is distributed in the hope that it will be useful, but WITHOUT
12   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
14   more details.
15 
16   You should have received a copy of the GNU General Public License along with
17   this program; if not, write to the Free Software Foundation, Inc., 59
18   Temple Place - Suite 330, Boston, MA  02111-1307, USA.
19 
20   The full GNU General Public License is included in this distribution in the
21   file called LICENSE.
22 
23   Contact Information:
24   Linux NICS <linux.nics@intel.com>
25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26 
27 *******************************************************************************/
28 
29 /* e1000_hw.h
30  * Structures, enums, and macros for the MAC
31  */
32 
33 #ifndef _E1000_HW_H_
34 #define _E1000_HW_H_
35 
36 /* Forward declarations of structures used by the shared code */
37 struct e1000_hw;
38 struct e1000_hw_stats;
39 
40 /* Enumerated types specific to the e1000 hardware */
41 /* Media Access Controlers */
42 typedef enum {
43     e1000_undefined = 0,
44     e1000_82542_rev2_0,
45     e1000_82542_rev2_1,
46     e1000_82543,
47     e1000_82544,
48     e1000_82540,
49     e1000_82545,
50     e1000_82545_rev_3,
51     e1000_82546,
52     e1000_82546_rev_3,
53     e1000_82541,
54     e1000_82541_rev_2,
55     e1000_82547,
56     e1000_82547_rev_2,
57     e1000_num_macs
58 } e1000_mac_type;
59 
60 typedef enum {
61     e1000_eeprom_uninitialized = 0,
62     e1000_eeprom_spi,
63     e1000_eeprom_microwire,
64     e1000_num_eeprom_types
65 } e1000_eeprom_type;
66 
67 /* Media Types */
68 typedef enum {
69 	e1000_media_type_copper = 0,
70 	e1000_media_type_fiber = 1,
71 	e1000_media_type_internal_serdes = 2,
72 	e1000_num_media_types
73 } e1000_media_type;
74 
75 typedef enum {
76     e1000_10_half = 0,
77     e1000_10_full = 1,
78     e1000_100_half = 2,
79     e1000_100_full = 3
80 } e1000_speed_duplex_type;
81 
82 /* Flow Control Settings */
83 typedef enum {
84 	e1000_fc_none = 0,
85 	e1000_fc_rx_pause = 1,
86 	e1000_fc_tx_pause = 2,
87 	e1000_fc_full = 3,
88 	e1000_fc_default = 0xFF
89 } e1000_fc_type;
90 
91 /* PCI bus types */
92 typedef enum {
93 	e1000_bus_type_unknown = 0,
94 	e1000_bus_type_pci,
95 	e1000_bus_type_pcix,
96 	e1000_bus_type_reserved
97 } e1000_bus_type;
98 
99 /* PCI bus speeds */
100 typedef enum {
101 	e1000_bus_speed_unknown = 0,
102 	e1000_bus_speed_33,
103 	e1000_bus_speed_66,
104 	e1000_bus_speed_100,
105 	e1000_bus_speed_120,
106 	e1000_bus_speed_133,
107 	e1000_bus_speed_reserved
108 } e1000_bus_speed;
109 
110 /* PCI bus widths */
111 typedef enum {
112 	e1000_bus_width_unknown = 0,
113 	e1000_bus_width_32,
114 	e1000_bus_width_64,
115 	e1000_bus_width_reserved
116 } e1000_bus_width;
117 
118 /* PHY status info structure and supporting enums */
119 typedef enum {
120 	e1000_cable_length_50 = 0,
121 	e1000_cable_length_50_80,
122 	e1000_cable_length_80_110,
123 	e1000_cable_length_110_140,
124 	e1000_cable_length_140,
125 	e1000_cable_length_undefined = 0xFF
126 } e1000_cable_length;
127 
128 typedef enum {
129     e1000_igp_cable_length_10  = 10,
130     e1000_igp_cable_length_20  = 20,
131     e1000_igp_cable_length_30  = 30,
132     e1000_igp_cable_length_40  = 40,
133     e1000_igp_cable_length_50  = 50,
134     e1000_igp_cable_length_60  = 60,
135     e1000_igp_cable_length_70  = 70,
136     e1000_igp_cable_length_80  = 80,
137     e1000_igp_cable_length_90  = 90,
138     e1000_igp_cable_length_100 = 100,
139     e1000_igp_cable_length_110 = 110,
140     e1000_igp_cable_length_120 = 120,
141     e1000_igp_cable_length_130 = 130,
142     e1000_igp_cable_length_140 = 140,
143     e1000_igp_cable_length_150 = 150,
144     e1000_igp_cable_length_160 = 160,
145     e1000_igp_cable_length_170 = 170,
146     e1000_igp_cable_length_180 = 180
147 } e1000_igp_cable_length;
148 
149 typedef enum {
150 	e1000_10bt_ext_dist_enable_normal = 0,
151 	e1000_10bt_ext_dist_enable_lower,
152 	e1000_10bt_ext_dist_enable_undefined = 0xFF
153 } e1000_10bt_ext_dist_enable;
154 
155 typedef enum {
156 	e1000_rev_polarity_normal = 0,
157 	e1000_rev_polarity_reversed,
158 	e1000_rev_polarity_undefined = 0xFF
159 } e1000_rev_polarity;
160 
161 typedef enum {
162     e1000_downshift_normal = 0,
163     e1000_downshift_activated,
164     e1000_downshift_undefined = 0xFF
165 } e1000_downshift;
166 
167 typedef enum {
168 	e1000_polarity_reversal_enabled = 0,
169 	e1000_polarity_reversal_disabled,
170 	e1000_polarity_reversal_undefined = 0xFF
171 } e1000_polarity_reversal;
172 
173 typedef enum {
174 	e1000_auto_x_mode_manual_mdi = 0,
175 	e1000_auto_x_mode_manual_mdix,
176 	e1000_auto_x_mode_auto1,
177 	e1000_auto_x_mode_auto2,
178 	e1000_auto_x_mode_undefined = 0xFF
179 } e1000_auto_x_mode;
180 
181 typedef enum {
182 	e1000_1000t_rx_status_not_ok = 0,
183 	e1000_1000t_rx_status_ok,
184 	e1000_1000t_rx_status_undefined = 0xFF
185 } e1000_1000t_rx_status;
186 
187 typedef enum {
188     e1000_phy_m88 = 0,
189     e1000_phy_igp,
190     e1000_phy_undefined = 0xFF
191 } e1000_phy_type;
192 
193 typedef enum {
194     e1000_ms_hw_default = 0,
195     e1000_ms_force_master,
196     e1000_ms_force_slave,
197     e1000_ms_auto
198 } e1000_ms_type;
199 
200 typedef enum {
201     e1000_ffe_config_enabled = 0,
202     e1000_ffe_config_active,
203     e1000_ffe_config_blocked
204 } e1000_ffe_config;
205 
206 typedef enum {
207     e1000_dsp_config_disabled = 0,
208     e1000_dsp_config_enabled,
209     e1000_dsp_config_activated,
210     e1000_dsp_config_undefined = 0xFF
211 } e1000_dsp_config;
212 
213 struct e1000_phy_info {
214 	e1000_cable_length cable_length;
215 	e1000_10bt_ext_dist_enable extended_10bt_distance;
216 	e1000_rev_polarity cable_polarity;
217 	e1000_downshift downshift;
218 	e1000_polarity_reversal polarity_correction;
219 	e1000_auto_x_mode mdix_mode;
220 	e1000_1000t_rx_status local_rx;
221 	e1000_1000t_rx_status remote_rx;
222 };
223 
224 struct e1000_phy_stats {
225 	uint32_t idle_errors;
226 	uint32_t receive_errors;
227 };
228 
229 struct e1000_eeprom_info {
230     e1000_eeprom_type type;
231     uint16_t word_size;
232     uint16_t opcode_bits;
233     uint16_t address_bits;
234     uint16_t delay_usec;
235     uint16_t page_size;
236 };
237 
238 
239 
240 /* Error Codes */
241 #define E1000_SUCCESS      0
242 #define E1000_ERR_EEPROM   1
243 #define E1000_ERR_PHY      2
244 #define E1000_ERR_CONFIG   3
245 #define E1000_ERR_PARAM    4
246 #define E1000_ERR_MAC_TYPE 5
247 #define E1000_ERR_PHY_TYPE 6
248 #define E1000_ERR_NOLINK   7
249 #define E1000_ERR_TIMEOUT  8
250 
251 #define E1000_READ_REG_IO(a, reg) \
252 	e1000_read_reg_io((a), E1000_##reg)
253 #define E1000_WRITE_REG_IO(a, reg, val) \
254 	e1000_write_reg_io((a), E1000_##reg, val)
255 
256 /* PCI Device IDs */
257 #define E1000_DEV_ID_82542               0x1000
258 #define E1000_DEV_ID_82543GC_FIBER       0x1001
259 #define E1000_DEV_ID_82543GC_COPPER      0x1004
260 #define E1000_DEV_ID_82544EI_COPPER      0x1008
261 #define E1000_DEV_ID_82544EI_FIBER       0x1009
262 #define E1000_DEV_ID_82544GC_COPPER      0x100C
263 #define E1000_DEV_ID_82544GC_LOM         0x100D
264 #define E1000_DEV_ID_82540EM             0x100E
265 #define E1000_DEV_ID_82540EM_LOM         0x1015
266 #define E1000_DEV_ID_82540EP_LOM         0x1016
267 #define E1000_DEV_ID_82540EP             0x1017
268 #define E1000_DEV_ID_82540EP_LP          0x101E
269 #define E1000_DEV_ID_82545EM_COPPER      0x100F
270 #define E1000_DEV_ID_82545EM_FIBER       0x1011
271 #define E1000_DEV_ID_82545GM_COPPER      0x1026
272 #define E1000_DEV_ID_82545GM_FIBER       0x1027
273 #define E1000_DEV_ID_82545GM_SERDES      0x1028
274 #define E1000_DEV_ID_82546EB_COPPER      0x1010
275 #define E1000_DEV_ID_82546EB_FIBER       0x1012
276 #define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
277 #define E1000_DEV_ID_82541EI             0x1013
278 #define E1000_DEV_ID_82541EI_MOBILE      0x1018
279 #define E1000_DEV_ID_82541ER             0x1078
280 #define E1000_DEV_ID_82547GI             0x1075
281 #define E1000_DEV_ID_82541GI             0x1076
282 #define E1000_DEV_ID_82541GI_MOBILE      0x1077
283 #define E1000_DEV_ID_82546GB_COPPER      0x1079
284 #define E1000_DEV_ID_82546GB_FIBER       0x107A
285 #define E1000_DEV_ID_82546GB_SERDES      0x107B
286 #define E1000_DEV_ID_82547EI             0x1019
287 
288 #define NODE_ADDRESS_SIZE 6
289 #define ETH_LENGTH_OF_ADDRESS 6
290 
291 /* MAC decode size is 128K - This is the size of BAR0 */
292 #define MAC_DECODE_SIZE (128 * 1024)
293 
294 #define E1000_82542_2_0_REV_ID 2
295 #define E1000_82542_2_1_REV_ID 3
296 
297 #define SPEED_10    10
298 #define SPEED_100   100
299 #define SPEED_1000  1000
300 #define HALF_DUPLEX 1
301 #define FULL_DUPLEX 2
302 
303 /* The sizes (in bytes) of a ethernet packet */
304 #define ENET_HEADER_SIZE             14
305 #define MAXIMUM_ETHERNET_FRAME_SIZE  1518 /* With FCS */
306 #define MINIMUM_ETHERNET_FRAME_SIZE  64   /* With FCS */
307 #define ETHERNET_FCS_SIZE            4
308 #define MAXIMUM_ETHERNET_PACKET_SIZE \
309     (MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
310 #define MINIMUM_ETHERNET_PACKET_SIZE \
311     (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
312 #define CRC_LENGTH                   ETHERNET_FCS_SIZE
313 #define MAX_JUMBO_FRAME_SIZE         0x3F00
314 
315 
316 /* 802.1q VLAN Packet Sizes */
317 #define VLAN_TAG_SIZE                     4     /* 802.3ac tag (not DMAed) */
318 
319 /* Ethertype field values */
320 #define ETHERNET_IEEE_VLAN_TYPE 0x8100  /* 802.3ac packet */
321 #define ETHERNET_IP_TYPE        0x0800  /* IP packets */
322 #define ETHERNET_ARP_TYPE       0x0806  /* Address Resolution Protocol (ARP) */
323 
324 /* Packet Header defines */
325 #define IP_PROTOCOL_TCP    6
326 #define IP_PROTOCOL_UDP    0x11
327 
328 /* This defines the bits that are set in the Interrupt Mask
329  * Set/Read Register.  Each bit is documented below:
330  *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
331  *   o RXSEQ  = Receive Sequence Error
332  */
333 #define POLL_IMS_ENABLE_MASK ( \
334     E1000_IMS_RXDMT0 |         \
335     E1000_IMS_RXSEQ)
336 
337 /* This defines the bits that are set in the Interrupt Mask
338  * Set/Read Register.  Each bit is documented below:
339  *   o RXT0   = Receiver Timer Interrupt (ring 0)
340  *   o TXDW   = Transmit Descriptor Written Back
341  *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
342  *   o RXSEQ  = Receive Sequence Error
343  *   o LSC    = Link Status Change
344  */
345 #define IMS_ENABLE_MASK ( \
346     E1000_IMS_RXT0   |    \
347     E1000_IMS_TXDW   |    \
348     E1000_IMS_RXDMT0 |    \
349     E1000_IMS_RXSEQ  |    \
350     E1000_IMS_LSC)
351 
352 /* Number of high/low register pairs in the RAR. The RAR (Receive Address
353  * Registers) holds the directed and multicast addresses that we monitor. We
354  * reserve one of these spots for our directed address, allowing us room for
355  * E1000_RAR_ENTRIES - 1 multicast addresses.
356  */
357 #define E1000_RAR_ENTRIES 15
358 
359 #define MIN_NUMBER_OF_DESCRIPTORS 8
360 #define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
361 
362 /* Receive Descriptor */
363 struct e1000_rx_desc {
364     uint64_t buffer_addr; /* Address of the descriptor's data buffer */
365     uint16_t length;     /* Length of data DMAed into data buffer */
366     uint16_t csum;       /* Packet checksum */
367     uint8_t status;      /* Descriptor status */
368     uint8_t errors;      /* Descriptor Errors */
369     uint16_t special;
370 };
371 
372 /* Receive Decriptor bit definitions */
373 #define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
374 #define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
375 #define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
376 #define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
377 #define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
378 #define E1000_RXD_STAT_IPCS     0x40    /* IP xsum calculated */
379 #define E1000_RXD_STAT_PIF      0x80    /* passed in-exact filter */
380 #define E1000_RXD_ERR_CE        0x01    /* CRC Error */
381 #define E1000_RXD_ERR_SE        0x02    /* Symbol Error */
382 #define E1000_RXD_ERR_SEQ       0x04    /* Sequence Error */
383 #define E1000_RXD_ERR_CXE       0x10    /* Carrier Extension Error */
384 #define E1000_RXD_ERR_TCPE      0x20    /* TCP/UDP Checksum Error */
385 #define E1000_RXD_ERR_IPE       0x40    /* IP Checksum Error */
386 #define E1000_RXD_ERR_RXE       0x80    /* Rx Data Error */
387 #define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */
388 #define E1000_RXD_SPC_PRI_MASK  0xE000  /* Priority is in upper 3 bits */
389 #define E1000_RXD_SPC_PRI_SHIFT 0x000D  /* Priority is in upper 3 of 16 */
390 #define E1000_RXD_SPC_CFI_MASK  0x1000  /* CFI is bit 12 */
391 #define E1000_RXD_SPC_CFI_SHIFT 0x000C  /* CFI is bit 12 */
392 
393 /* mask to determine if packets should be dropped due to frame errors */
394 #define E1000_RXD_ERR_FRAME_ERR_MASK ( \
395     E1000_RXD_ERR_CE  |                \
396     E1000_RXD_ERR_SE  |                \
397     E1000_RXD_ERR_SEQ |                \
398     E1000_RXD_ERR_CXE |                \
399     E1000_RXD_ERR_RXE)
400 
401 /* Transmit Descriptor */
402 struct e1000_tx_desc {
403     uint64_t buffer_addr;       /* Address of the descriptor's data buffer */
404     union {
405         uint32_t data;
406         struct {
407             uint16_t length;    /* Data buffer length */
408             uint8_t cso;        /* Checksum offset */
409             uint8_t cmd;        /* Descriptor control */
410         } flags;
411     } lower;
412     union {
413         uint32_t data;
414         struct {
415             uint8_t status;     /* Descriptor status */
416             uint8_t css;        /* Checksum start */
417             uint16_t special;
418         } fields;
419     } upper;
420 };
421 
422 /* Transmit Descriptor bit definitions */
423 #define E1000_TXD_DTYP_D     0x00100000 /* Data Descriptor */
424 #define E1000_TXD_DTYP_C     0x00000000 /* Context Descriptor */
425 #define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
426 #define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
427 #define E1000_TXD_CMD_EOP    0x01000000 /* End of Packet */
428 #define E1000_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */
429 #define E1000_TXD_CMD_IC     0x04000000 /* Insert Checksum */
430 #define E1000_TXD_CMD_RS     0x08000000 /* Report Status */
431 #define E1000_TXD_CMD_RPS    0x10000000 /* Report Packet Sent */
432 #define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
433 #define E1000_TXD_CMD_VLE    0x40000000 /* Add VLAN tag */
434 #define E1000_TXD_CMD_IDE    0x80000000 /* Enable Tidv register */
435 #define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */
436 #define E1000_TXD_STAT_EC    0x00000002 /* Excess Collisions */
437 #define E1000_TXD_STAT_LC    0x00000004 /* Late Collisions */
438 #define E1000_TXD_STAT_TU    0x00000008 /* Transmit underrun */
439 #define E1000_TXD_CMD_TCP    0x01000000 /* TCP packet */
440 #define E1000_TXD_CMD_IP     0x02000000 /* IP packet */
441 #define E1000_TXD_CMD_TSE    0x04000000 /* TCP Seg enable */
442 #define E1000_TXD_STAT_TC    0x00000004 /* Tx Underrun */
443 
444 /* Offload Context Descriptor */
445 struct e1000_context_desc {
446     union {
447         uint32_t ip_config;
448         struct {
449             uint8_t ipcss;      /* IP checksum start */
450             uint8_t ipcso;      /* IP checksum offset */
451             uint16_t ipcse;     /* IP checksum end */
452         } ip_fields;
453     } lower_setup;
454     union {
455         uint32_t tcp_config;
456         struct {
457             uint8_t tucss;      /* TCP checksum start */
458             uint8_t tucso;      /* TCP checksum offset */
459             uint16_t tucse;     /* TCP checksum end */
460         } tcp_fields;
461     } upper_setup;
462     uint32_t cmd_and_length;    /* */
463     union {
464         uint32_t data;
465         struct {
466             uint8_t status;     /* Descriptor status */
467             uint8_t hdr_len;    /* Header length */
468             uint16_t mss;       /* Maximum segment size */
469         } fields;
470     } tcp_seg_setup;
471 };
472 
473 /* Offload data descriptor */
474 struct e1000_data_desc {
475     uint64_t buffer_addr;       /* Address of the descriptor's buffer address */
476     union {
477         uint32_t data;
478         struct {
479             uint16_t length;    /* Data buffer length */
480             uint8_t typ_len_ext;        /* */
481             uint8_t cmd;        /* */
482         } flags;
483     } lower;
484     union {
485         uint32_t data;
486         struct {
487             uint8_t status;     /* Descriptor status */
488             uint8_t popts;      /* Packet Options */
489             uint16_t special;   /* */
490         } fields;
491     } upper;
492 };
493 
494 /* Filters */
495 #define E1000_NUM_UNICAST          16   /* Unicast filter entries */
496 #define E1000_MC_TBL_SIZE          128  /* Multicast Filter Table (4096 bits) */
497 #define E1000_VLAN_FILTER_TBL_SIZE 128  /* VLAN Filter Table (4096 bits) */
498 
499 
500 /* Receive Address Register */
501 struct e1000_rar {
502     volatile uint32_t low;      /* receive address low */
503     volatile uint32_t high;     /* receive address high */
504 };
505 
506 /* Number of entries in the Multicast Table Array (MTA). */
507 #define E1000_NUM_MTA_REGISTERS 128
508 
509 /* IPv4 Address Table Entry */
510 struct e1000_ipv4_at_entry {
511     volatile uint32_t ipv4_addr;        /* IP Address (RW) */
512     volatile uint32_t reserved;
513 };
514 
515 /* Four wakeup IP addresses are supported */
516 #define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
517 #define E1000_IP4AT_SIZE                  E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
518 #define E1000_IP6AT_SIZE                  1
519 
520 /* IPv6 Address Table Entry */
521 struct e1000_ipv6_at_entry {
522     volatile uint8_t ipv6_addr[16];
523 };
524 
525 /* Flexible Filter Length Table Entry */
526 struct e1000_fflt_entry {
527     volatile uint32_t length;   /* Flexible Filter Length (RW) */
528     volatile uint32_t reserved;
529 };
530 
531 /* Flexible Filter Mask Table Entry */
532 struct e1000_ffmt_entry {
533     volatile uint32_t mask;     /* Flexible Filter Mask (RW) */
534     volatile uint32_t reserved;
535 };
536 
537 /* Flexible Filter Value Table Entry */
538 struct e1000_ffvt_entry {
539     volatile uint32_t value;    /* Flexible Filter Value (RW) */
540     volatile uint32_t reserved;
541 };
542 
543 /* Four Flexible Filters are supported */
544 #define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
545 
546 /* Each Flexible Filter is at most 128 (0x80) bytes in length */
547 #define E1000_FLEXIBLE_FILTER_SIZE_MAX  128
548 
549 #define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
550 #define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
551 #define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
552 
553 /* Register Set. (82543, 82544)
554  *
555  * Registers are defined to be 32 bits and  should be accessed as 32 bit values.
556  * These registers are physically located on the NIC, but are mapped into the
557  * host memory address space.
558  *
559  * RW - register is both readable and writable
560  * RO - register is read only
561  * WO - register is write only
562  * R/clr - register is read only and is cleared when read
563  * A - register array
564  */
565 #define E1000_CTRL     0x00000  /* Device Control - RW */
566 #define E1000_CTRL_DUP 0x00004  /* Device Control Duplicate (Shadow) - RW */
567 #define E1000_STATUS   0x00008  /* Device Status - RO */
568 #define E1000_EECD     0x00010  /* EEPROM/Flash Control - RW */
569 #define E1000_EERD     0x00014  /* EEPROM Read - RW */
570 #define E1000_CTRL_EXT 0x00018  /* Extended Device Control - RW */
571 #define E1000_FLA      0x0001C  /* Flash Access - RW */
572 #define E1000_MDIC     0x00020  /* MDI Control - RW */
573 #define E1000_FCAL     0x00028  /* Flow Control Address Low - RW */
574 #define E1000_FCAH     0x0002C  /* Flow Control Address High -RW */
575 #define E1000_FCT      0x00030  /* Flow Control Type - RW */
576 #define E1000_VET      0x00038  /* VLAN Ether Type - RW */
577 #define E1000_ICR      0x000C0  /* Interrupt Cause Read - R/clr */
578 #define E1000_ITR      0x000C4  /* Interrupt Throttling Rate - RW */
579 #define E1000_ICS      0x000C8  /* Interrupt Cause Set - WO */
580 #define E1000_IMS      0x000D0  /* Interrupt Mask Set - RW */
581 #define E1000_IMC      0x000D8  /* Interrupt Mask Clear - WO */
582 #define E1000_RCTL     0x00100  /* RX Control - RW */
583 #define E1000_FCTTV    0x00170  /* Flow Control Transmit Timer Value - RW */
584 #define E1000_TXCW     0x00178  /* TX Configuration Word - RW */
585 #define E1000_RXCW     0x00180  /* RX Configuration Word - RO */
586 #define E1000_TCTL     0x00400  /* TX Control - RW */
587 #define E1000_TIPG     0x00410  /* TX Inter-packet gap -RW */
588 #define E1000_TBT      0x00448  /* TX Burst Timer - RW */
589 #define E1000_AIT      0x00458  /* Adaptive Interframe Spacing Throttle - RW */
590 #define E1000_LEDCTL   0x00E00  /* LED Control - RW */
591 #define E1000_PBA      0x01000  /* Packet Buffer Allocation - RW */
592 #define E1000_FCRTL    0x02160  /* Flow Control Receive Threshold Low - RW */
593 #define E1000_FCRTH    0x02168  /* Flow Control Receive Threshold High - RW */
594 #define E1000_RDBAL    0x02800  /* RX Descriptor Base Address Low - RW */
595 #define E1000_RDBAH    0x02804  /* RX Descriptor Base Address High - RW */
596 #define E1000_RDLEN    0x02808  /* RX Descriptor Length - RW */
597 #define E1000_RDH      0x02810  /* RX Descriptor Head - RW */
598 #define E1000_RDT      0x02818  /* RX Descriptor Tail - RW */
599 #define E1000_RDTR     0x02820  /* RX Delay Timer - RW */
600 #define E1000_RXDCTL   0x02828  /* RX Descriptor Control - RW */
601 #define E1000_RADV     0x0282C  /* RX Interrupt Absolute Delay Timer - RW */
602 #define E1000_RSRPD    0x02C00  /* RX Small Packet Detect - RW */
603 #define E1000_TXDMAC   0x03000  /* TX DMA Control - RW */
604 #define E1000_TDFH     0x03410  /* TX Data FIFO Head - RW */
605 #define E1000_TDFT     0x03418  /* TX Data FIFO Tail - RW */
606 #define E1000_TDFHS    0x03420  /* TX Data FIFO Head Saved - RW */
607 #define E1000_TDFTS    0x03428  /* TX Data FIFO Tail Saved - RW */
608 #define E1000_TDFPC    0x03430  /* TX Data FIFO Packet Count - RW */
609 #define E1000_TDBAL    0x03800  /* TX Descriptor Base Address Low - RW */
610 #define E1000_TDBAH    0x03804  /* TX Descriptor Base Address High - RW */
611 #define E1000_TDLEN    0x03808  /* TX Descriptor Length - RW */
612 #define E1000_TDH      0x03810  /* TX Descriptor Head - RW */
613 #define E1000_TDT      0x03818  /* TX Descripotr Tail - RW */
614 #define E1000_TIDV     0x03820  /* TX Interrupt Delay Value - RW */
615 #define E1000_TXDCTL   0x03828  /* TX Descriptor Control - RW */
616 #define E1000_TADV     0x0382C  /* TX Interrupt Absolute Delay Val - RW */
617 #define E1000_TSPMT    0x03830  /* TCP Segmentation PAD & Min Threshold - RW */
618 #define E1000_CRCERRS  0x04000  /* CRC Error Count - R/clr */
619 #define E1000_ALGNERRC 0x04004  /* Alignment Error Count - R/clr */
620 #define E1000_SYMERRS  0x04008  /* Symbol Error Count - R/clr */
621 #define E1000_RXERRC   0x0400C  /* Receive Error Count - R/clr */
622 #define E1000_MPC      0x04010  /* Missed Packet Count - R/clr */
623 #define E1000_SCC      0x04014  /* Single Collision Count - R/clr */
624 #define E1000_ECOL     0x04018  /* Excessive Collision Count - R/clr */
625 #define E1000_MCC      0x0401C  /* Multiple Collision Count - R/clr */
626 #define E1000_LATECOL  0x04020  /* Late Collision Count - R/clr */
627 #define E1000_COLC     0x04028  /* Collision Count - R/clr */
628 #define E1000_DC       0x04030  /* Defer Count - R/clr */
629 #define E1000_TNCRS    0x04034  /* TX-No CRS - R/clr */
630 #define E1000_SEC      0x04038  /* Sequence Error Count - R/clr */
631 #define E1000_CEXTERR  0x0403C  /* Carrier Extension Error Count - R/clr */
632 #define E1000_RLEC     0x04040  /* Receive Length Error Count - R/clr */
633 #define E1000_XONRXC   0x04048  /* XON RX Count - R/clr */
634 #define E1000_XONTXC   0x0404C  /* XON TX Count - R/clr */
635 #define E1000_XOFFRXC  0x04050  /* XOFF RX Count - R/clr */
636 #define E1000_XOFFTXC  0x04054  /* XOFF TX Count - R/clr */
637 #define E1000_FCRUC    0x04058  /* Flow Control RX Unsupported Count- R/clr */
638 #define E1000_PRC64    0x0405C  /* Packets RX (64 bytes) - R/clr */
639 #define E1000_PRC127   0x04060  /* Packets RX (65-127 bytes) - R/clr */
640 #define E1000_PRC255   0x04064  /* Packets RX (128-255 bytes) - R/clr */
641 #define E1000_PRC511   0x04068  /* Packets RX (255-511 bytes) - R/clr */
642 #define E1000_PRC1023  0x0406C  /* Packets RX (512-1023 bytes) - R/clr */
643 #define E1000_PRC1522  0x04070  /* Packets RX (1024-1522 bytes) - R/clr */
644 #define E1000_GPRC     0x04074  /* Good Packets RX Count - R/clr */
645 #define E1000_BPRC     0x04078  /* Broadcast Packets RX Count - R/clr */
646 #define E1000_MPRC     0x0407C  /* Multicast Packets RX Count - R/clr */
647 #define E1000_GPTC     0x04080  /* Good Packets TX Count - R/clr */
648 #define E1000_GORCL    0x04088  /* Good Octets RX Count Low - R/clr */
649 #define E1000_GORCH    0x0408C  /* Good Octets RX Count High - R/clr */
650 #define E1000_GOTCL    0x04090  /* Good Octets TX Count Low - R/clr */
651 #define E1000_GOTCH    0x04094  /* Good Octets TX Count High - R/clr */
652 #define E1000_RNBC     0x040A0  /* RX No Buffers Count - R/clr */
653 #define E1000_RUC      0x040A4  /* RX Undersize Count - R/clr */
654 #define E1000_RFC      0x040A8  /* RX Fragment Count - R/clr */
655 #define E1000_ROC      0x040AC  /* RX Oversize Count - R/clr */
656 #define E1000_RJC      0x040B0  /* RX Jabber Count - R/clr */
657 #define E1000_MGTPRC   0x040B4  /* Management Packets RX Count - R/clr */
658 #define E1000_MGTPDC   0x040B8  /* Management Packets Dropped Count - R/clr */
659 #define E1000_MGTPTC   0x040BC  /* Management Packets TX Count - R/clr */
660 #define E1000_TORL     0x040C0  /* Total Octets RX Low - R/clr */
661 #define E1000_TORH     0x040C4  /* Total Octets RX High - R/clr */
662 #define E1000_TOTL     0x040C8  /* Total Octets TX Low - R/clr */
663 #define E1000_TOTH     0x040CC  /* Total Octets TX High - R/clr */
664 #define E1000_TPR      0x040D0  /* Total Packets RX - R/clr */
665 #define E1000_TPT      0x040D4  /* Total Packets TX - R/clr */
666 #define E1000_PTC64    0x040D8  /* Packets TX (64 bytes) - R/clr */
667 #define E1000_PTC127   0x040DC  /* Packets TX (65-127 bytes) - R/clr */
668 #define E1000_PTC255   0x040E0  /* Packets TX (128-255 bytes) - R/clr */
669 #define E1000_PTC511   0x040E4  /* Packets TX (256-511 bytes) - R/clr */
670 #define E1000_PTC1023  0x040E8  /* Packets TX (512-1023 bytes) - R/clr */
671 #define E1000_PTC1522  0x040EC  /* Packets TX (1024-1522 Bytes) - R/clr */
672 #define E1000_MPTC     0x040F0  /* Multicast Packets TX Count - R/clr */
673 #define E1000_BPTC     0x040F4  /* Broadcast Packets TX Count - R/clr */
674 #define E1000_TSCTC    0x040F8  /* TCP Segmentation Context TX - R/clr */
675 #define E1000_TSCTFC   0x040FC  /* TCP Segmentation Context TX Fail - R/clr */
676 #define E1000_RXCSUM   0x05000  /* RX Checksum Control - RW */
677 #define E1000_MTA      0x05200  /* Multicast Table Array - RW Array */
678 #define E1000_RA       0x05400  /* Receive Address - RW Array */
679 #define E1000_VFTA     0x05600  /* VLAN Filter Table Array - RW Array */
680 #define E1000_WUC      0x05800  /* Wakeup Control - RW */
681 #define E1000_WUFC     0x05808  /* Wakeup Filter Control - RW */
682 #define E1000_WUS      0x05810  /* Wakeup Status - RO */
683 #define E1000_MANC     0x05820  /* Management Control - RW */
684 #define E1000_IPAV     0x05838  /* IP Address Valid - RW */
685 #define E1000_IP4AT    0x05840  /* IPv4 Address Table - RW Array */
686 #define E1000_IP6AT    0x05880  /* IPv6 Address Table - RW Array */
687 #define E1000_WUPL     0x05900  /* Wakeup Packet Length - RW */
688 #define E1000_WUPM     0x05A00  /* Wakeup Packet Memory - RO A */
689 #define E1000_FFLT     0x05F00  /* Flexible Filter Length Table - RW Array */
690 #define E1000_FFMT     0x09000  /* Flexible Filter Mask Table - RW Array */
691 #define E1000_FFVT     0x09800  /* Flexible Filter Value Table - RW Array */
692 
693 /* Register Set (82542)
694  *
695  * Some of the 82542 registers are located at different offsets than they are
696  * in more current versions of the 8254x. Despite the difference in location,
697  * the registers function in the same manner.
698  */
699 #define E1000_82542_CTRL     E1000_CTRL
700 #define E1000_82542_CTRL_DUP E1000_CTRL_DUP
701 #define E1000_82542_STATUS   E1000_STATUS
702 #define E1000_82542_EECD     E1000_EECD
703 #define E1000_82542_EERD     E1000_EERD
704 #define E1000_82542_CTRL_EXT E1000_CTRL_EXT
705 #define E1000_82542_FLA      E1000_FLA
706 #define E1000_82542_MDIC     E1000_MDIC
707 #define E1000_82542_FCAL     E1000_FCAL
708 #define E1000_82542_FCAH     E1000_FCAH
709 #define E1000_82542_FCT      E1000_FCT
710 #define E1000_82542_VET      E1000_VET
711 #define E1000_82542_RA       0x00040
712 #define E1000_82542_ICR      E1000_ICR
713 #define E1000_82542_ITR      E1000_ITR
714 #define E1000_82542_ICS      E1000_ICS
715 #define E1000_82542_IMS      E1000_IMS
716 #define E1000_82542_IMC      E1000_IMC
717 #define E1000_82542_RCTL     E1000_RCTL
718 #define E1000_82542_RDTR     0x00108
719 #define E1000_82542_RDBAL    0x00110
720 #define E1000_82542_RDBAH    0x00114
721 #define E1000_82542_RDLEN    0x00118
722 #define E1000_82542_RDH      0x00120
723 #define E1000_82542_RDT      0x00128
724 #define E1000_82542_FCRTH    0x00160
725 #define E1000_82542_FCRTL    0x00168
726 #define E1000_82542_FCTTV    E1000_FCTTV
727 #define E1000_82542_TXCW     E1000_TXCW
728 #define E1000_82542_RXCW     E1000_RXCW
729 #define E1000_82542_MTA      0x00200
730 #define E1000_82542_TCTL     E1000_TCTL
731 #define E1000_82542_TIPG     E1000_TIPG
732 #define E1000_82542_TDBAL    0x00420
733 #define E1000_82542_TDBAH    0x00424
734 #define E1000_82542_TDLEN    0x00428
735 #define E1000_82542_TDH      0x00430
736 #define E1000_82542_TDT      0x00438
737 #define E1000_82542_TIDV     0x00440
738 #define E1000_82542_TBT      E1000_TBT
739 #define E1000_82542_AIT      E1000_AIT
740 #define E1000_82542_VFTA     0x00600
741 #define E1000_82542_LEDCTL   E1000_LEDCTL
742 #define E1000_82542_PBA      E1000_PBA
743 #define E1000_82542_RXDCTL   E1000_RXDCTL
744 #define E1000_82542_RADV     E1000_RADV
745 #define E1000_82542_RSRPD    E1000_RSRPD
746 #define E1000_82542_TXDMAC   E1000_TXDMAC
747 #define E1000_82542_TDFHS    E1000_TDFHS
748 #define E1000_82542_TDFTS    E1000_TDFTS
749 #define E1000_82542_TDFPC    E1000_TDFPC
750 #define E1000_82542_TXDCTL   E1000_TXDCTL
751 #define E1000_82542_TADV     E1000_TADV
752 #define E1000_82542_TSPMT    E1000_TSPMT
753 #define E1000_82542_CRCERRS  E1000_CRCERRS
754 #define E1000_82542_ALGNERRC E1000_ALGNERRC
755 #define E1000_82542_SYMERRS  E1000_SYMERRS
756 #define E1000_82542_RXERRC   E1000_RXERRC
757 #define E1000_82542_MPC      E1000_MPC
758 #define E1000_82542_SCC      E1000_SCC
759 #define E1000_82542_ECOL     E1000_ECOL
760 #define E1000_82542_MCC      E1000_MCC
761 #define E1000_82542_LATECOL  E1000_LATECOL
762 #define E1000_82542_COLC     E1000_COLC
763 #define E1000_82542_DC       E1000_DC
764 #define E1000_82542_TNCRS    E1000_TNCRS
765 #define E1000_82542_SEC      E1000_SEC
766 #define E1000_82542_CEXTERR  E1000_CEXTERR
767 #define E1000_82542_RLEC     E1000_RLEC
768 #define E1000_82542_XONRXC   E1000_XONRXC
769 #define E1000_82542_XONTXC   E1000_XONTXC
770 #define E1000_82542_XOFFRXC  E1000_XOFFRXC
771 #define E1000_82542_XOFFTXC  E1000_XOFFTXC
772 #define E1000_82542_FCRUC    E1000_FCRUC
773 #define E1000_82542_PRC64    E1000_PRC64
774 #define E1000_82542_PRC127   E1000_PRC127
775 #define E1000_82542_PRC255   E1000_PRC255
776 #define E1000_82542_PRC511   E1000_PRC511
777 #define E1000_82542_PRC1023  E1000_PRC1023
778 #define E1000_82542_PRC1522  E1000_PRC1522
779 #define E1000_82542_GPRC     E1000_GPRC
780 #define E1000_82542_BPRC     E1000_BPRC
781 #define E1000_82542_MPRC     E1000_MPRC
782 #define E1000_82542_GPTC     E1000_GPTC
783 #define E1000_82542_GORCL    E1000_GORCL
784 #define E1000_82542_GORCH    E1000_GORCH
785 #define E1000_82542_GOTCL    E1000_GOTCL
786 #define E1000_82542_GOTCH    E1000_GOTCH
787 #define E1000_82542_RNBC     E1000_RNBC
788 #define E1000_82542_RUC      E1000_RUC
789 #define E1000_82542_RFC      E1000_RFC
790 #define E1000_82542_ROC      E1000_ROC
791 #define E1000_82542_RJC      E1000_RJC
792 #define E1000_82542_MGTPRC   E1000_MGTPRC
793 #define E1000_82542_MGTPDC   E1000_MGTPDC
794 #define E1000_82542_MGTPTC   E1000_MGTPTC
795 #define E1000_82542_TORL     E1000_TORL
796 #define E1000_82542_TORH     E1000_TORH
797 #define E1000_82542_TOTL     E1000_TOTL
798 #define E1000_82542_TOTH     E1000_TOTH
799 #define E1000_82542_TPR      E1000_TPR
800 #define E1000_82542_TPT      E1000_TPT
801 #define E1000_82542_PTC64    E1000_PTC64
802 #define E1000_82542_PTC127   E1000_PTC127
803 #define E1000_82542_PTC255   E1000_PTC255
804 #define E1000_82542_PTC511   E1000_PTC511
805 #define E1000_82542_PTC1023  E1000_PTC1023
806 #define E1000_82542_PTC1522  E1000_PTC1522
807 #define E1000_82542_MPTC     E1000_MPTC
808 #define E1000_82542_BPTC     E1000_BPTC
809 #define E1000_82542_TSCTC    E1000_TSCTC
810 #define E1000_82542_TSCTFC   E1000_TSCTFC
811 #define E1000_82542_RXCSUM   E1000_RXCSUM
812 #define E1000_82542_WUC      E1000_WUC
813 #define E1000_82542_WUFC     E1000_WUFC
814 #define E1000_82542_WUS      E1000_WUS
815 #define E1000_82542_MANC     E1000_MANC
816 #define E1000_82542_IPAV     E1000_IPAV
817 #define E1000_82542_IP4AT    E1000_IP4AT
818 #define E1000_82542_IP6AT    E1000_IP6AT
819 #define E1000_82542_WUPL     E1000_WUPL
820 #define E1000_82542_WUPM     E1000_WUPM
821 #define E1000_82542_FFLT     E1000_FFLT
822 #define E1000_82542_TDFH     0x08010
823 #define E1000_82542_TDFT     0x08018
824 #define E1000_82542_FFMT     E1000_FFMT
825 #define E1000_82542_FFVT     E1000_FFVT
826 
827 /* Statistics counters collected by the MAC */
828 struct e1000_hw_stats {
829     uint64_t crcerrs;
830     uint64_t algnerrc;
831     uint64_t symerrs;
832     uint64_t rxerrc;
833     uint64_t mpc;
834     uint64_t scc;
835     uint64_t ecol;
836     uint64_t mcc;
837     uint64_t latecol;
838     uint64_t colc;
839     uint64_t dc;
840     uint64_t tncrs;
841     uint64_t sec;
842     uint64_t cexterr;
843     uint64_t rlec;
844     uint64_t xonrxc;
845     uint64_t xontxc;
846     uint64_t xoffrxc;
847     uint64_t xofftxc;
848     uint64_t fcruc;
849     uint64_t prc64;
850     uint64_t prc127;
851     uint64_t prc255;
852     uint64_t prc511;
853     uint64_t prc1023;
854     uint64_t prc1522;
855     uint64_t gprc;
856     uint64_t bprc;
857     uint64_t mprc;
858     uint64_t gptc;
859     uint64_t gorcl;
860     uint64_t gorch;
861     uint64_t gotcl;
862     uint64_t gotch;
863     uint64_t rnbc;
864     uint64_t ruc;
865     uint64_t rfc;
866     uint64_t roc;
867     uint64_t rjc;
868     uint64_t mgprc;
869     uint64_t mgpdc;
870     uint64_t mgptc;
871     uint64_t torl;
872     uint64_t torh;
873     uint64_t totl;
874     uint64_t toth;
875     uint64_t tpr;
876     uint64_t tpt;
877     uint64_t ptc64;
878     uint64_t ptc127;
879     uint64_t ptc255;
880     uint64_t ptc511;
881     uint64_t ptc1023;
882     uint64_t ptc1522;
883     uint64_t mptc;
884     uint64_t bptc;
885     uint64_t tsctc;
886     uint64_t tsctfc;
887 };
888 
889 /* Structure containing variables used by the shared code (e1000_hw.c) */
890 struct e1000_hw {
891 	struct pci_device *pdev;
892 	uint8_t *hw_addr;
893 	e1000_mac_type   mac_type;
894 	e1000_phy_type phy_type;
895 #if 0
896 	uint32_t phy_init_script;
897 #endif
898 	e1000_media_type media_type;
899 	e1000_fc_type    fc;
900 #if 0
901 	e1000_bus_speed bus_speed;
902 	e1000_bus_width bus_width;
903 	e1000_bus_type  bus_type;
904 #endif
905 	struct e1000_eeprom_info eeprom;
906 #if 0
907 	e1000_ms_type master_slave;
908 	e1000_ms_type original_master_slave;
909 	e1000_ffe_config ffe_config_state;
910 #endif
911 	uint32_t io_base;
912 	uint32_t phy_id;
913 #ifdef LINUX_DRIVER
914 	uint32_t phy_revision;
915 #endif
916 	uint32_t phy_addr;
917 #if 0
918 	uint32_t original_fc;
919 #endif
920 	uint32_t txcw;
921 	uint32_t autoneg_failed;
922 #if 0
923 	uint32_t max_frame_size;
924 	uint32_t min_frame_size;
925 	uint32_t mc_filter_type;
926 	uint32_t num_mc_addrs;
927 	uint32_t collision_delta;
928 	uint32_t tx_packet_delta;
929 	uint32_t ledctl_default;
930 	uint32_t ledctl_mode1;
931 	uint32_t ledctl_mode2;
932 	uint16_t phy_spd_default;
933 #endif
934 	uint16_t autoneg_advertised;
935 	uint16_t pci_cmd_word;
936 #if 0
937 	uint16_t fc_high_water;
938 	uint16_t fc_low_water;
939 	uint16_t fc_pause_time;
940 	uint16_t current_ifs_val;
941 	uint16_t ifs_min_val;
942 	uint16_t ifs_max_val;
943 	uint16_t ifs_step_size;
944 	uint16_t ifs_ratio;
945 #endif
946 	uint16_t device_id;
947 	uint16_t vendor_id;
948 #if 0
949 	uint16_t subsystem_id;
950 	uint16_t subsystem_vendor_id;
951 #endif
952 	uint8_t revision_id;
953 #if 0
954 	uint8_t autoneg;
955 	uint8_t mdix;
956 	uint8_t forced_speed_duplex;
957 	uint8_t wait_autoneg_complete;
958 	uint8_t dma_fairness;
959 #endif
960 	uint8_t mac_addr[NODE_ADDRESS_SIZE];
961 #if 0
962 	uint8_t perm_mac_addr[NODE_ADDRESS_SIZE];
963 	boolean_t disable_polarity_correction;
964 	boolean_t speed_downgraded;
965 	e1000_dsp_config dsp_config_state;
966 	boolean_t get_link_status;
967 	boolean_t serdes_link_down;
968 #endif
969 	boolean_t tbi_compatibility_en;
970 	boolean_t tbi_compatibility_on;
971 #if 0
972 	boolean_t phy_reset_disable;
973 	boolean_t fc_send_xon;
974 	boolean_t fc_strict_ieee;
975 	boolean_t report_tx_early;
976 	boolean_t adaptive_ifs;
977 	boolean_t ifs_params_forced;
978 	boolean_t in_ifs_mode;
979 #endif
980 };
981 
982 
983 #define E1000_EEPROM_SWDPIN0   0x0001   /* SWDPIN 0 EEPROM Value */
984 #define E1000_EEPROM_LED_LOGIC 0x0020   /* Led Logic Word */
985 
986 /* Register Bit Masks */
987 /* Device Control */
988 #define E1000_CTRL_FD       0x00000001  /* Full duplex.0=half; 1=full */
989 #define E1000_CTRL_BEM      0x00000002  /* Endian Mode.0=little,1=big */
990 #define E1000_CTRL_PRIOR    0x00000004  /* Priority on PCI. 0=rx,1=fair */
991 #define E1000_CTRL_LRST     0x00000008  /* Link reset. 0=normal,1=reset */
992 #define E1000_CTRL_TME      0x00000010  /* Test mode. 0=normal,1=test */
993 #define E1000_CTRL_SLE      0x00000020  /* Serial Link on 0=dis,1=en */
994 #define E1000_CTRL_ASDE     0x00000020  /* Auto-speed detect enable */
995 #define E1000_CTRL_SLU      0x00000040  /* Set link up (Force Link) */
996 #define E1000_CTRL_ILOS     0x00000080  /* Invert Loss-Of Signal */
997 #define E1000_CTRL_SPD_SEL  0x00000300  /* Speed Select Mask */
998 #define E1000_CTRL_SPD_10   0x00000000  /* Force 10Mb */
999 #define E1000_CTRL_SPD_100  0x00000100  /* Force 100Mb */
1000 #define E1000_CTRL_SPD_1000 0x00000200  /* Force 1Gb */
1001 #define E1000_CTRL_BEM32    0x00000400  /* Big Endian 32 mode */
1002 #define E1000_CTRL_FRCSPD   0x00000800  /* Force Speed */
1003 #define E1000_CTRL_FRCDPX   0x00001000  /* Force Duplex */
1004 #define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
1005 #define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
1006 #define E1000_CTRL_SWDPIN2  0x00100000  /* SWDPIN 2 value */
1007 #define E1000_CTRL_SWDPIN3  0x00200000  /* SWDPIN 3 value */
1008 #define E1000_CTRL_SWDPIO0  0x00400000  /* SWDPIN 0 Input or output */
1009 #define E1000_CTRL_SWDPIO1  0x00800000  /* SWDPIN 1 input or output */
1010 #define E1000_CTRL_SWDPIO2  0x01000000  /* SWDPIN 2 input or output */
1011 #define E1000_CTRL_SWDPIO3  0x02000000  /* SWDPIN 3 input or output */
1012 #define E1000_CTRL_RST      0x04000000  /* Global reset */
1013 #define E1000_CTRL_RFCE     0x08000000  /* Receive Flow Control enable */
1014 #define E1000_CTRL_TFCE     0x10000000  /* Transmit flow control enable */
1015 #define E1000_CTRL_RTE      0x20000000  /* Routing tag enable */
1016 #define E1000_CTRL_VME      0x40000000  /* IEEE VLAN mode enable */
1017 #define E1000_CTRL_PHY_RST  0x80000000  /* PHY Reset */
1018 
1019 /* Device Status */
1020 #define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
1021 #define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
1022 #define E1000_STATUS_FUNC_MASK  0x0000000C      /* PCI Function Mask */
1023 #define E1000_STATUS_FUNC_0     0x00000000      /* Function 0 */
1024 #define E1000_STATUS_FUNC_1     0x00000004      /* Function 1 */
1025 #define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
1026 #define E1000_STATUS_TBIMODE    0x00000020      /* TBI mode */
1027 #define E1000_STATUS_SPEED_MASK 0x000000C0
1028 #define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
1029 #define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
1030 #define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
1031 #define E1000_STATUS_ASDV       0x00000300      /* Auto speed detect value */
1032 #define E1000_STATUS_MTXCKOK    0x00000400      /* MTX clock running OK */
1033 #define E1000_STATUS_PCI66      0x00000800      /* In 66Mhz slot */
1034 #define E1000_STATUS_BUS64      0x00001000      /* In 64 bit slot */
1035 #define E1000_STATUS_PCIX_MODE  0x00002000      /* PCI-X mode */
1036 #define E1000_STATUS_PCIX_SPEED 0x0000C000      /* PCI-X bus speed */
1037 
1038 /* Constants used to intrepret the masked PCI-X bus speed. */
1039 #define E1000_STATUS_PCIX_SPEED_66  0x00000000 /* PCI-X bus speed  50-66 MHz */
1040 #define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed  66-100 MHz */
1041 #define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
1042 
1043 /* EEPROM/Flash Control */
1044 #define E1000_EECD_SK        0x00000001 /* EEPROM Clock */
1045 #define E1000_EECD_CS        0x00000002 /* EEPROM Chip Select */
1046 #define E1000_EECD_DI        0x00000004 /* EEPROM Data In */
1047 #define E1000_EECD_DO        0x00000008 /* EEPROM Data Out */
1048 #define E1000_EECD_FWE_MASK  0x00000030
1049 #define E1000_EECD_FWE_DIS   0x00000010 /* Disable FLASH writes */
1050 #define E1000_EECD_FWE_EN    0x00000020 /* Enable FLASH writes */
1051 #define E1000_EECD_FWE_SHIFT 4
1052 #define E1000_EECD_REQ       0x00000040 /* EEPROM Access Request */
1053 #define E1000_EECD_GNT       0x00000080 /* EEPROM Access Grant */
1054 #define E1000_EECD_PRES      0x00000100 /* EEPROM Present */
1055 #define E1000_EECD_SIZE      0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
1056 #define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
1057                                          * (0-small, 1-large) */
1058 #define E1000_EECD_TYPE      0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
1059 #ifndef E1000_EEPROM_GRANT_ATTEMPTS
1060 #define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
1061 #endif
1062 
1063 /* EEPROM Read */
1064 #define E1000_EERD_START      0x00000001 /* Start Read */
1065 #define E1000_EERD_DONE       0x00000010 /* Read Done */
1066 #define E1000_EERD_ADDR_SHIFT 8
1067 #define E1000_EERD_ADDR_MASK  0x0000FF00 /* Read Address */
1068 #define E1000_EERD_DATA_SHIFT 16
1069 #define E1000_EERD_DATA_MASK  0xFFFF0000 /* Read Data */
1070 
1071 /* SPI EEPROM Status Register */
1072 #define EEPROM_STATUS_RDY_SPI  0x01
1073 #define EEPROM_STATUS_WEN_SPI  0x02
1074 #define EEPROM_STATUS_BP0_SPI  0x04
1075 #define EEPROM_STATUS_BP1_SPI  0x08
1076 #define EEPROM_STATUS_WPEN_SPI 0x80
1077 
1078 /* Extended Device Control */
1079 #define E1000_CTRL_EXT_GPI0_EN   0x00000001 /* Maps SDP4 to GPI0 */
1080 #define E1000_CTRL_EXT_GPI1_EN   0x00000002 /* Maps SDP5 to GPI1 */
1081 #define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
1082 #define E1000_CTRL_EXT_GPI2_EN   0x00000004 /* Maps SDP6 to GPI2 */
1083 #define E1000_CTRL_EXT_GPI3_EN   0x00000008 /* Maps SDP7 to GPI3 */
1084 #define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
1085 #define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
1086 #define E1000_CTRL_EXT_PHY_INT   E1000_CTRL_EXT_SDP5_DATA
1087 #define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
1088 #define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
1089 #define E1000_CTRL_EXT_SDP4_DIR  0x00000100 /* Direction of SDP4 0=in 1=out */
1090 #define E1000_CTRL_EXT_SDP5_DIR  0x00000200 /* Direction of SDP5 0=in 1=out */
1091 #define E1000_CTRL_EXT_SDP6_DIR  0x00000400 /* Direction of SDP6 0=in 1=out */
1092 #define E1000_CTRL_EXT_SDP7_DIR  0x00000800 /* Direction of SDP7 0=in 1=out */
1093 #define E1000_CTRL_EXT_ASDCHK    0x00001000 /* Initiate an ASD sequence */
1094 #define E1000_CTRL_EXT_EE_RST    0x00002000 /* Reinitialize from EEPROM */
1095 #define E1000_CTRL_EXT_IPS       0x00004000 /* Invert Power State */
1096 #define E1000_CTRL_EXT_SPD_BYPS  0x00008000 /* Speed Select Bypass */
1097 #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
1098 #define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
1099 #define E1000_CTRL_EXT_LINK_MODE_TBI  0x00C00000
1100 #define E1000_CTRL_EXT_WR_WMARK_MASK  0x03000000
1101 #define E1000_CTRL_EXT_WR_WMARK_256   0x00000000
1102 #define E1000_CTRL_EXT_WR_WMARK_320   0x01000000
1103 #define E1000_CTRL_EXT_WR_WMARK_384   0x02000000
1104 #define E1000_CTRL_EXT_WR_WMARK_448   0x03000000
1105 
1106 /* MDI Control */
1107 #define E1000_MDIC_DATA_MASK 0x0000FFFF
1108 #define E1000_MDIC_REG_MASK  0x001F0000
1109 #define E1000_MDIC_REG_SHIFT 16
1110 #define E1000_MDIC_PHY_MASK  0x03E00000
1111 #define E1000_MDIC_PHY_SHIFT 21
1112 #define E1000_MDIC_OP_WRITE  0x04000000
1113 #define E1000_MDIC_OP_READ   0x08000000
1114 #define E1000_MDIC_READY     0x10000000
1115 #define E1000_MDIC_INT_EN    0x20000000
1116 #define E1000_MDIC_ERROR     0x40000000
1117 
1118 /* LED Control */
1119 #define E1000_LEDCTL_LED0_MODE_MASK  0x0000000F
1120 #define E1000_LEDCTL_LED0_MODE_SHIFT 0
1121 #define E1000_LEDCTL_LED0_IVRT       0x00000040
1122 #define E1000_LEDCTL_LED0_BLINK      0x00000080
1123 #define E1000_LEDCTL_LED1_MODE_MASK  0x00000F00
1124 #define E1000_LEDCTL_LED1_MODE_SHIFT 8
1125 #define E1000_LEDCTL_LED1_IVRT       0x00004000
1126 #define E1000_LEDCTL_LED1_BLINK      0x00008000
1127 #define E1000_LEDCTL_LED2_MODE_MASK  0x000F0000
1128 #define E1000_LEDCTL_LED2_MODE_SHIFT 16
1129 #define E1000_LEDCTL_LED2_IVRT       0x00400000
1130 #define E1000_LEDCTL_LED2_BLINK      0x00800000
1131 #define E1000_LEDCTL_LED3_MODE_MASK  0x0F000000
1132 #define E1000_LEDCTL_LED3_MODE_SHIFT 24
1133 #define E1000_LEDCTL_LED3_IVRT       0x40000000
1134 #define E1000_LEDCTL_LED3_BLINK      0x80000000
1135 
1136 #define E1000_LEDCTL_MODE_LINK_10_1000  0x0
1137 #define E1000_LEDCTL_MODE_LINK_100_1000 0x1
1138 #define E1000_LEDCTL_MODE_LINK_UP       0x2
1139 #define E1000_LEDCTL_MODE_ACTIVITY      0x3
1140 #define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
1141 #define E1000_LEDCTL_MODE_LINK_10       0x5
1142 #define E1000_LEDCTL_MODE_LINK_100      0x6
1143 #define E1000_LEDCTL_MODE_LINK_1000     0x7
1144 #define E1000_LEDCTL_MODE_PCIX_MODE     0x8
1145 #define E1000_LEDCTL_MODE_FULL_DUPLEX   0x9
1146 #define E1000_LEDCTL_MODE_COLLISION     0xA
1147 #define E1000_LEDCTL_MODE_BUS_SPEED     0xB
1148 #define E1000_LEDCTL_MODE_BUS_SIZE      0xC
1149 #define E1000_LEDCTL_MODE_PAUSED        0xD
1150 #define E1000_LEDCTL_MODE_LED_ON        0xE
1151 #define E1000_LEDCTL_MODE_LED_OFF       0xF
1152 
1153 /* Receive Address */
1154 #define E1000_RAH_AV  0x80000000        /* Receive descriptor valid */
1155 
1156 /* Interrupt Cause Read */
1157 #define E1000_ICR_TXDW    0x00000001    /* Transmit desc written back */
1158 #define E1000_ICR_TXQE    0x00000002    /* Transmit Queue empty */
1159 #define E1000_ICR_LSC     0x00000004    /* Link Status Change */
1160 #define E1000_ICR_RXSEQ   0x00000008    /* rx sequence error */
1161 #define E1000_ICR_RXDMT0  0x00000010    /* rx desc min. threshold (0) */
1162 #define E1000_ICR_RXO     0x00000040    /* rx overrun */
1163 #define E1000_ICR_RXT0    0x00000080    /* rx timer intr (ring 0) */
1164 #define E1000_ICR_MDAC    0x00000200    /* MDIO access complete */
1165 #define E1000_ICR_RXCFG   0x00000400    /* RX /c/ ordered set */
1166 #define E1000_ICR_GPI_EN0 0x00000800    /* GP Int 0 */
1167 #define E1000_ICR_GPI_EN1 0x00001000    /* GP Int 1 */
1168 #define E1000_ICR_GPI_EN2 0x00002000    /* GP Int 2 */
1169 #define E1000_ICR_GPI_EN3 0x00004000    /* GP Int 3 */
1170 #define E1000_ICR_TXD_LOW 0x00008000
1171 #define E1000_ICR_SRPD    0x00010000
1172 
1173 /* Interrupt Cause Set */
1174 #define E1000_ICS_TXDW    E1000_ICR_TXDW        /* Transmit desc written back */
1175 #define E1000_ICS_TXQE    E1000_ICR_TXQE        /* Transmit Queue empty */
1176 #define E1000_ICS_LSC     E1000_ICR_LSC         /* Link Status Change */
1177 #define E1000_ICS_RXSEQ   E1000_ICR_RXSEQ       /* rx sequence error */
1178 #define E1000_ICS_RXDMT0  E1000_ICR_RXDMT0      /* rx desc min. threshold */
1179 #define E1000_ICS_RXO     E1000_ICR_RXO         /* rx overrun */
1180 #define E1000_ICS_RXT0    E1000_ICR_RXT0        /* rx timer intr */
1181 #define E1000_ICS_MDAC    E1000_ICR_MDAC        /* MDIO access complete */
1182 #define E1000_ICS_RXCFG   E1000_ICR_RXCFG       /* RX /c/ ordered set */
1183 #define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0     /* GP Int 0 */
1184 #define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1     /* GP Int 1 */
1185 #define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2     /* GP Int 2 */
1186 #define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3     /* GP Int 3 */
1187 #define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
1188 #define E1000_ICS_SRPD    E1000_ICR_SRPD
1189 
1190 /* Interrupt Mask Set */
1191 #define E1000_IMS_TXDW    E1000_ICR_TXDW        /* Transmit desc written back */
1192 #define E1000_IMS_TXQE    E1000_ICR_TXQE        /* Transmit Queue empty */
1193 #define E1000_IMS_LSC     E1000_ICR_LSC         /* Link Status Change */
1194 #define E1000_IMS_RXSEQ   E1000_ICR_RXSEQ       /* rx sequence error */
1195 #define E1000_IMS_RXDMT0  E1000_ICR_RXDMT0      /* rx desc min. threshold */
1196 #define E1000_IMS_RXO     E1000_ICR_RXO         /* rx overrun */
1197 #define E1000_IMS_RXT0    E1000_ICR_RXT0        /* rx timer intr */
1198 #define E1000_IMS_MDAC    E1000_ICR_MDAC        /* MDIO access complete */
1199 #define E1000_IMS_RXCFG   E1000_ICR_RXCFG       /* RX /c/ ordered set */
1200 #define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0     /* GP Int 0 */
1201 #define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1     /* GP Int 1 */
1202 #define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2     /* GP Int 2 */
1203 #define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3     /* GP Int 3 */
1204 #define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
1205 #define E1000_IMS_SRPD    E1000_ICR_SRPD
1206 
1207 /* Interrupt Mask Clear */
1208 #define E1000_IMC_TXDW    E1000_ICR_TXDW        /* Transmit desc written back */
1209 #define E1000_IMC_TXQE    E1000_ICR_TXQE        /* Transmit Queue empty */
1210 #define E1000_IMC_LSC     E1000_ICR_LSC         /* Link Status Change */
1211 #define E1000_IMC_RXSEQ   E1000_ICR_RXSEQ       /* rx sequence error */
1212 #define E1000_IMC_RXDMT0  E1000_ICR_RXDMT0      /* rx desc min. threshold */
1213 #define E1000_IMC_RXO     E1000_ICR_RXO         /* rx overrun */
1214 #define E1000_IMC_RXT0    E1000_ICR_RXT0        /* rx timer intr */
1215 #define E1000_IMC_MDAC    E1000_ICR_MDAC        /* MDIO access complete */
1216 #define E1000_IMC_RXCFG   E1000_ICR_RXCFG       /* RX /c/ ordered set */
1217 #define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0     /* GP Int 0 */
1218 #define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1     /* GP Int 1 */
1219 #define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2     /* GP Int 2 */
1220 #define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3     /* GP Int 3 */
1221 #define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
1222 #define E1000_IMC_SRPD    E1000_ICR_SRPD
1223 
1224 /* Receive Control */
1225 #define E1000_RCTL_RST          0x00000001      /* Software reset */
1226 #define E1000_RCTL_EN           0x00000002      /* enable */
1227 #define E1000_RCTL_SBP          0x00000004      /* store bad packet */
1228 #define E1000_RCTL_UPE          0x00000008      /* unicast promiscuous enable */
1229 #define E1000_RCTL_MPE          0x00000010      /* multicast promiscuous enab */
1230 #define E1000_RCTL_LPE          0x00000020      /* long packet enable */
1231 #define E1000_RCTL_LBM_NO       0x00000000      /* no loopback mode */
1232 #define E1000_RCTL_LBM_MAC      0x00000040      /* MAC loopback mode */
1233 #define E1000_RCTL_LBM_SLP      0x00000080      /* serial link loopback mode */
1234 #define E1000_RCTL_LBM_TCVR     0x000000C0      /* tcvr loopback mode */
1235 #define E1000_RCTL_RDMTS_HALF   0x00000000      /* rx desc min threshold size */
1236 #define E1000_RCTL_RDMTS_QUAT   0x00000100      /* rx desc min threshold size */
1237 #define E1000_RCTL_RDMTS_EIGTH  0x00000200      /* rx desc min threshold size */
1238 #define E1000_RCTL_MO_SHIFT     12              /* multicast offset shift */
1239 #define E1000_RCTL_MO_0         0x00000000      /* multicast offset 11:0 */
1240 #define E1000_RCTL_MO_1         0x00001000      /* multicast offset 12:1 */
1241 #define E1000_RCTL_MO_2         0x00002000      /* multicast offset 13:2 */
1242 #define E1000_RCTL_MO_3         0x00003000      /* multicast offset 15:4 */
1243 #define E1000_RCTL_MDR          0x00004000      /* multicast desc ring 0 */
1244 #define E1000_RCTL_BAM          0x00008000      /* broadcast enable */
1245 /* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
1246 #define E1000_RCTL_SZ_2048      0x00000000      /* rx buffer size 2048 */
1247 #define E1000_RCTL_SZ_1024      0x00010000      /* rx buffer size 1024 */
1248 #define E1000_RCTL_SZ_512       0x00020000      /* rx buffer size 512 */
1249 #define E1000_RCTL_SZ_256       0x00030000      /* rx buffer size 256 */
1250 /* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
1251 #define E1000_RCTL_SZ_16384     0x00010000      /* rx buffer size 16384 */
1252 #define E1000_RCTL_SZ_8192      0x00020000      /* rx buffer size 8192 */
1253 #define E1000_RCTL_SZ_4096      0x00030000      /* rx buffer size 4096 */
1254 #define E1000_RCTL_VFE          0x00040000      /* vlan filter enable */
1255 #define E1000_RCTL_CFIEN        0x00080000      /* canonical form enable */
1256 #define E1000_RCTL_CFI          0x00100000      /* canonical form indicator */
1257 #define E1000_RCTL_DPF          0x00400000      /* discard pause frames */
1258 #define E1000_RCTL_PMCF         0x00800000      /* pass MAC control frames */
1259 #define E1000_RCTL_BSEX         0x02000000      /* Buffer size extension */
1260 
1261 /* Receive Descriptor */
1262 #define E1000_RDT_DELAY 0x0000ffff      /* Delay timer (1=1024us) */
1263 #define E1000_RDT_FPDB  0x80000000      /* Flush descriptor block */
1264 #define E1000_RDLEN_LEN 0x0007ff80      /* descriptor length */
1265 #define E1000_RDH_RDH   0x0000ffff      /* receive descriptor head */
1266 #define E1000_RDT_RDT   0x0000ffff      /* receive descriptor tail */
1267 
1268 /* Flow Control */
1269 #define E1000_FCRTH_RTH  0x0000FFF8     /* Mask Bits[15:3] for RTH */
1270 #define E1000_FCRTH_XFCE 0x80000000     /* External Flow Control Enable */
1271 #define E1000_FCRTL_RTL  0x0000FFF8     /* Mask Bits[15:3] for RTL */
1272 #define E1000_FCRTL_XONE 0x80000000     /* Enable XON frame transmission */
1273 
1274 /* Receive Descriptor Control */
1275 #define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
1276 #define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
1277 #define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
1278 #define E1000_RXDCTL_GRAN    0x01000000 /* RXDCTL Granularity */
1279 
1280 /* Transmit Descriptor Control */
1281 #define E1000_TXDCTL_PTHRESH 0x000000FF /* TXDCTL Prefetch Threshold */
1282 #define E1000_TXDCTL_HTHRESH 0x0000FF00 /* TXDCTL Host Threshold */
1283 #define E1000_TXDCTL_WTHRESH 0x00FF0000 /* TXDCTL Writeback Threshold */
1284 #define E1000_TXDCTL_GRAN    0x01000000 /* TXDCTL Granularity */
1285 #define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
1286 #define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
1287 
1288 /* Transmit Configuration Word */
1289 #define E1000_TXCW_FD         0x00000020        /* TXCW full duplex */
1290 #define E1000_TXCW_HD         0x00000040        /* TXCW half duplex */
1291 #define E1000_TXCW_PAUSE      0x00000080        /* TXCW sym pause request */
1292 #define E1000_TXCW_ASM_DIR    0x00000100        /* TXCW astm pause direction */
1293 #define E1000_TXCW_PAUSE_MASK 0x00000180        /* TXCW pause request mask */
1294 #define E1000_TXCW_RF         0x00003000        /* TXCW remote fault */
1295 #define E1000_TXCW_NP         0x00008000        /* TXCW next page */
1296 #define E1000_TXCW_CW         0x0000ffff        /* TxConfigWord mask */
1297 #define E1000_TXCW_TXC        0x40000000        /* Transmit Config control */
1298 #define E1000_TXCW_ANE        0x80000000        /* Auto-neg enable */
1299 
1300 /* Receive Configuration Word */
1301 #define E1000_RXCW_CW    0x0000ffff     /* RxConfigWord mask */
1302 #define E1000_RXCW_NC    0x04000000     /* Receive config no carrier */
1303 #define E1000_RXCW_IV    0x08000000     /* Receive config invalid */
1304 #define E1000_RXCW_CC    0x10000000     /* Receive config change */
1305 #define E1000_RXCW_C     0x20000000     /* Receive config */
1306 #define E1000_RXCW_SYNCH 0x40000000     /* Receive config synch */
1307 #define E1000_RXCW_ANC   0x80000000     /* Auto-neg complete */
1308 
1309 /* Transmit Control */
1310 #define E1000_TCTL_RST    0x00000001    /* software reset */
1311 #define E1000_TCTL_EN     0x00000002    /* enable tx */
1312 #define E1000_TCTL_BCE    0x00000004    /* busy check enable */
1313 #define E1000_TCTL_PSP    0x00000008    /* pad short packets */
1314 #define E1000_TCTL_CT     0x00000ff0    /* collision threshold */
1315 #define E1000_TCTL_COLD   0x003ff000    /* collision distance */
1316 #define E1000_TCTL_SWXOFF 0x00400000    /* SW Xoff transmission */
1317 #define E1000_TCTL_PBE    0x00800000    /* Packet Burst Enable */
1318 #define E1000_TCTL_RTLC   0x01000000    /* Re-transmit on late collision */
1319 #define E1000_TCTL_NRTU   0x02000000    /* No Re-transmit on underrun */
1320 
1321 /* Receive Checksum Control */
1322 #define E1000_RXCSUM_PCSS_MASK 0x000000FF   /* Packet Checksum Start */
1323 #define E1000_RXCSUM_IPOFL     0x00000100   /* IPv4 checksum offload */
1324 #define E1000_RXCSUM_TUOFL     0x00000200   /* TCP / UDP checksum offload */
1325 #define E1000_RXCSUM_IPV6OFL   0x00000400   /* IPv6 checksum offload */
1326 
1327 /* Definitions for power management and wakeup registers */
1328 /* Wake Up Control */
1329 #define E1000_WUC_APME       0x00000001 /* APM Enable */
1330 #define E1000_WUC_PME_EN     0x00000002 /* PME Enable */
1331 #define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
1332 #define E1000_WUC_APMPME     0x00000008 /* Assert PME on APM Wakeup */
1333 #define E1000_WUC_SPM        0x80000000 /* Enable SPM */
1334 
1335 /* Wake Up Filter Control */
1336 #define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
1337 #define E1000_WUFC_MAG  0x00000002 /* Magic Packet Wakeup Enable */
1338 #define E1000_WUFC_EX   0x00000004 /* Directed Exact Wakeup Enable */
1339 #define E1000_WUFC_MC   0x00000008 /* Directed Multicast Wakeup Enable */
1340 #define E1000_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
1341 #define E1000_WUFC_ARP  0x00000020 /* ARP Request Packet Wakeup Enable */
1342 #define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
1343 #define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
1344 #define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
1345 #define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
1346 #define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
1347 #define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
1348 #define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
1349 #define E1000_WUFC_FLX_OFFSET 16       /* Offset to the Flexible Filters bits */
1350 #define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
1351 
1352 /* Wake Up Status */
1353 #define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
1354 #define E1000_WUS_MAG  0x00000002 /* Magic Packet Received */
1355 #define E1000_WUS_EX   0x00000004 /* Directed Exact Received */
1356 #define E1000_WUS_MC   0x00000008 /* Directed Multicast Received */
1357 #define E1000_WUS_BC   0x00000010 /* Broadcast Received */
1358 #define E1000_WUS_ARP  0x00000020 /* ARP Request Packet Received */
1359 #define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
1360 #define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
1361 #define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
1362 #define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
1363 #define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
1364 #define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
1365 #define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
1366 
1367 /* Management Control */
1368 #define E1000_MANC_SMBUS_EN      0x00000001 /* SMBus Enabled - RO */
1369 #define E1000_MANC_ASF_EN        0x00000002 /* ASF Enabled - RO */
1370 #define E1000_MANC_R_ON_FORCE    0x00000004 /* Reset on Force TCO - RO */
1371 #define E1000_MANC_RMCP_EN       0x00000100 /* Enable RCMP 026Fh Filtering */
1372 #define E1000_MANC_0298_EN       0x00000200 /* Enable RCMP 0298h Filtering */
1373 #define E1000_MANC_IPV4_EN       0x00000400 /* Enable IPv4 */
1374 #define E1000_MANC_IPV6_EN       0x00000800 /* Enable IPv6 */
1375 #define E1000_MANC_SNAP_EN       0x00001000 /* Accept LLC/SNAP */
1376 #define E1000_MANC_ARP_EN        0x00002000 /* Enable ARP Request Filtering */
1377 #define E1000_MANC_NEIGHBOR_EN   0x00004000 /* Enable Neighbor Discovery
1378                                              * Filtering */
1379 #define E1000_MANC_TCO_RESET     0x00010000 /* TCO Reset Occurred */
1380 #define E1000_MANC_RCV_TCO_EN    0x00020000 /* Receive TCO Packets Enabled */
1381 #define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
1382 #define E1000_MANC_SMB_REQ       0x01000000 /* SMBus Request */
1383 #define E1000_MANC_SMB_GNT       0x02000000 /* SMBus Grant */
1384 #define E1000_MANC_SMB_CLK_IN    0x04000000 /* SMBus Clock In */
1385 #define E1000_MANC_SMB_DATA_IN   0x08000000 /* SMBus Data In */
1386 #define E1000_MANC_SMB_DATA_OUT  0x10000000 /* SMBus Data Out */
1387 #define E1000_MANC_SMB_CLK_OUT   0x20000000 /* SMBus Clock Out */
1388 
1389 #define E1000_MANC_SMB_DATA_OUT_SHIFT  28 /* SMBus Data Out Shift */
1390 #define E1000_MANC_SMB_CLK_OUT_SHIFT   29 /* SMBus Clock Out Shift */
1391 
1392 /* Wake Up Packet Length */
1393 #define E1000_WUPL_LENGTH_MASK 0x0FFF   /* Only the lower 12 bits are valid */
1394 
1395 #define E1000_MDALIGN          4096
1396 
1397 /* EEPROM Commands - Microwire */
1398 #define EEPROM_READ_OPCODE_MICROWIRE  0x6  /* EEPROM read opcode */
1399 #define EEPROM_WRITE_OPCODE_MICROWIRE 0x5  /* EEPROM write opcode */
1400 #define EEPROM_ERASE_OPCODE_MICROWIRE 0x7  /* EEPROM erase opcode */
1401 #define EEPROM_EWEN_OPCODE_MICROWIRE  0x13 /* EEPROM erase/write enable */
1402 #define EEPROM_EWDS_OPCODE_MICROWIRE  0x10 /* EEPROM erast/write disable */
1403 
1404 /* EEPROM Commands - SPI */
1405 #define EEPROM_MAX_RETRY_SPI    5000 /* Max wait of 5ms, for RDY signal */
1406 #define EEPROM_READ_OPCODE_SPI  0x3  /* EEPROM read opcode */
1407 #define EEPROM_WRITE_OPCODE_SPI 0x2  /* EEPROM write opcode */
1408 #define EEPROM_A8_OPCODE_SPI    0x8  /* opcode bit-3 = address bit-8 */
1409 #define EEPROM_WREN_OPCODE_SPI  0x6  /* EEPROM set Write Enable latch */
1410 #define EEPROM_WRDI_OPCODE_SPI  0x4  /* EEPROM reset Write Enable latch */
1411 #define EEPROM_RDSR_OPCODE_SPI  0x5  /* EEPROM read Status register */
1412 #define EEPROM_WRSR_OPCODE_SPI  0x1  /* EEPROM write Status register */
1413 
1414 /* EEPROM Size definitions */
1415 #define EEPROM_SIZE_16KB        0x1800
1416 #define EEPROM_SIZE_8KB         0x1400
1417 #define EEPROM_SIZE_4KB         0x1000
1418 #define EEPROM_SIZE_2KB         0x0C00
1419 #define EEPROM_SIZE_1KB         0x0800
1420 #define EEPROM_SIZE_512B        0x0400
1421 #define EEPROM_SIZE_128B        0x0000
1422 #define EEPROM_SIZE_MASK        0x1C00
1423 
1424 /* EEPROM Word Offsets */
1425 #define EEPROM_COMPAT              0x0003
1426 #define EEPROM_ID_LED_SETTINGS     0x0004
1427 #define EEPROM_SERDES_AMPLITUDE       0x0006 /* For SERDES output amplitude adjustment. */
1428 #define EEPROM_INIT_CONTROL1_REG   0x000A
1429 #define EEPROM_INIT_CONTROL2_REG   0x000F
1430 #define EEPROM_INIT_CONTROL3_PORT_B   0x0014
1431 #define EEPROM_INIT_CONTROL3_PORT_A   0x0024
1432 #define EEPROM_CFG                 0x0012
1433 #define EEPROM_FLASH_VERSION       0x0032
1434 #define EEPROM_CHECKSUM_REG        0x003F
1435 
1436 /* Word definitions for ID LED Settings */
1437 #define ID_LED_RESERVED_0000 0x0000
1438 #define ID_LED_RESERVED_FFFF 0xFFFF
1439 #define ID_LED_DEFAULT       ((ID_LED_OFF1_ON2 << 12) | \
1440                               (ID_LED_OFF1_OFF2 << 8) | \
1441                               (ID_LED_DEF1_DEF2 << 4) | \
1442                               (ID_LED_DEF1_DEF2))
1443 #define ID_LED_DEF1_DEF2     0x1
1444 #define ID_LED_DEF1_ON2      0x2
1445 #define ID_LED_DEF1_OFF2     0x3
1446 #define ID_LED_ON1_DEF2      0x4
1447 #define ID_LED_ON1_ON2       0x5
1448 #define ID_LED_ON1_OFF2      0x6
1449 #define ID_LED_OFF1_DEF2     0x7
1450 #define ID_LED_OFF1_ON2      0x8
1451 #define ID_LED_OFF1_OFF2     0x9
1452 
1453 #define IGP_ACTIVITY_LED_MASK   0xFFFFF0FF
1454 #define IGP_ACTIVITY_LED_ENABLE 0x0300
1455 #define IGP_LED3_MODE           0x07000000
1456 
1457 
1458 /* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */
1459 #define EEPROM_SERDES_AMPLITUDE_MASK  0x000F
1460 
1461 /* Mask bits for fields in Word 0x0a of the EEPROM */
1462 #define EEPROM_WORD0A_ILOS   0x0010
1463 #define EEPROM_WORD0A_SWDPIO 0x01E0
1464 #define EEPROM_WORD0A_LRST   0x0200
1465 #define EEPROM_WORD0A_FD     0x0400
1466 #define EEPROM_WORD0A_66MHZ  0x0800
1467 
1468 /* Mask bits for fields in Word 0x0f of the EEPROM */
1469 #define EEPROM_WORD0F_PAUSE_MASK 0x3000
1470 #define EEPROM_WORD0F_PAUSE      0x1000
1471 #define EEPROM_WORD0F_ASM_DIR    0x2000
1472 #define EEPROM_WORD0F_ANE        0x0800
1473 #define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
1474 
1475 /* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
1476 #define EEPROM_SUM 0xBABA
1477 
1478 /* EEPROM Map defines (WORD OFFSETS)*/
1479 #define EEPROM_NODE_ADDRESS_BYTE_0 0
1480 #define EEPROM_PBA_BYTE_1          8
1481 
1482 #define EEPROM_RESERVED_WORD          0xFFFF
1483 
1484 /* EEPROM Map Sizes (Byte Counts) */
1485 #define PBA_SIZE 4
1486 
1487 /* Collision related configuration parameters */
1488 #define E1000_COLLISION_THRESHOLD       16
1489 #define E1000_CT_SHIFT                  4
1490 #define E1000_COLLISION_DISTANCE        64
1491 #define E1000_FDX_COLLISION_DISTANCE    E1000_COLLISION_DISTANCE
1492 #define E1000_HDX_COLLISION_DISTANCE    E1000_COLLISION_DISTANCE
1493 #define E1000_COLD_SHIFT                12
1494 
1495 /* Number of Transmit and Receive Descriptors must be a multiple of 8 */
1496 #define REQ_TX_DESCRIPTOR_MULTIPLE  8
1497 #define REQ_RX_DESCRIPTOR_MULTIPLE  8
1498 
1499 /* Default values for the transmit IPG register */
1500 #define DEFAULT_82542_TIPG_IPGT        10
1501 #define DEFAULT_82543_TIPG_IPGT_FIBER  9
1502 #define DEFAULT_82543_TIPG_IPGT_COPPER 8
1503 
1504 #define E1000_TIPG_IPGT_MASK  0x000003FF
1505 #define E1000_TIPG_IPGR1_MASK 0x000FFC00
1506 #define E1000_TIPG_IPGR2_MASK 0x3FF00000
1507 
1508 #define DEFAULT_82542_TIPG_IPGR1 2
1509 #define DEFAULT_82543_TIPG_IPGR1 8
1510 #define E1000_TIPG_IPGR1_SHIFT  10
1511 
1512 #define DEFAULT_82542_TIPG_IPGR2 10
1513 #define DEFAULT_82543_TIPG_IPGR2 6
1514 #define E1000_TIPG_IPGR2_SHIFT  20
1515 
1516 #define E1000_TXDMAC_DPP 0x00000001
1517 
1518 /* Adaptive IFS defines */
1519 #define TX_THRESHOLD_START     8
1520 #define TX_THRESHOLD_INCREMENT 10
1521 #define TX_THRESHOLD_DECREMENT 1
1522 #define TX_THRESHOLD_STOP      190
1523 #define TX_THRESHOLD_DISABLE   0
1524 #define TX_THRESHOLD_TIMER_MS  10000
1525 #define MIN_NUM_XMITS          1000
1526 #define IFS_MAX                80
1527 #define IFS_STEP               10
1528 #define IFS_MIN                40
1529 #define IFS_RATIO              4
1530 
1531 /* PBA constants */
1532 #define E1000_PBA_16K 0x0010    /* 16KB, default TX allocation */
1533 #define E1000_PBA_22K 0x0016
1534 #define E1000_PBA_24K 0x0018
1535 #define E1000_PBA_30K 0x001E
1536 #define E1000_PBA_40K 0x0028
1537 #define E1000_PBA_48K 0x0030    /* 48KB, default RX allocation */
1538 
1539 /* Flow Control Constants */
1540 #define FLOW_CONTROL_ADDRESS_LOW  0x00C28001
1541 #define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
1542 #define FLOW_CONTROL_TYPE         0x8808
1543 
1544 /* The historical defaults for the flow control values are given below. */
1545 #define FC_DEFAULT_HI_THRESH        (0x8000)    /* 32KB */
1546 #define FC_DEFAULT_LO_THRESH        (0x4000)    /* 16KB */
1547 #define FC_DEFAULT_TX_TIMER         (0x100)     /* ~130 us */
1548 
1549 /* PCIX Config space */
1550 #define PCIX_COMMAND_REGISTER    0xE6
1551 #define PCIX_STATUS_REGISTER_LO  0xE8
1552 #define PCIX_STATUS_REGISTER_HI  0xEA
1553 
1554 #define PCIX_COMMAND_MMRBC_MASK      0x000C
1555 #define PCIX_COMMAND_MMRBC_SHIFT     0x2
1556 #define PCIX_STATUS_HI_MMRBC_MASK    0x0060
1557 #define PCIX_STATUS_HI_MMRBC_SHIFT   0x5
1558 #define PCIX_STATUS_HI_MMRBC_4K      0x3
1559 #define PCIX_STATUS_HI_MMRBC_2K      0x2
1560 
1561 
1562 /* Number of bits required to shift right the "pause" bits from the
1563  * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register.
1564  */
1565 #define PAUSE_SHIFT 5
1566 
1567 /* Number of bits required to shift left the "SWDPIO" bits from the
1568  * EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field in the CTRL register.
1569  */
1570 #define SWDPIO_SHIFT 17
1571 
1572 /* Number of bits required to shift left the "SWDPIO_EXT" bits from the
1573  * EEPROM word F (bits 7:4) to the bits 11:8 of The Extended CTRL register.
1574  */
1575 #define SWDPIO__EXT_SHIFT 4
1576 
1577 /* Number of bits required to shift left the "ILOS" bit from the EEPROM
1578  * (bit 4) to the "ILOS" (bit 7) field in the CTRL register.
1579  */
1580 #define ILOS_SHIFT  3
1581 
1582 
1583 #define RECEIVE_BUFFER_ALIGN_SIZE  (256)
1584 
1585 /* Number of milliseconds we wait for auto-negotiation to complete */
1586 #define LINK_UP_TIMEOUT             500
1587 
1588 #define E1000_TX_BUFFER_SIZE ((uint32_t)1514)
1589 
1590 /* The carrier extension symbol, as received by the NIC. */
1591 #define CARRIER_EXTENSION   0x0F
1592 
1593 /* TBI_ACCEPT macro definition:
1594  *
1595  * This macro requires:
1596  *      adapter = a pointer to struct e1000_hw
1597  *      status = the 8 bit status field of the RX descriptor with EOP set
1598  *      error = the 8 bit error field of the RX descriptor with EOP set
1599  *      length = the sum of all the length fields of the RX descriptors that
1600  *               make up the current frame
1601  *      last_byte = the last byte of the frame DMAed by the hardware
1602  *      max_frame_length = the maximum frame length we want to accept.
1603  *      min_frame_length = the minimum frame length we want to accept.
1604  *
1605  * This macro is a conditional that should be used in the interrupt
1606  * handler's Rx processing routine when RxErrors have been detected.
1607  *
1608  * Typical use:
1609  *  ...
1610  *  if (TBI_ACCEPT) {
1611  *      accept_frame = TRUE;
1612  *      e1000_tbi_adjust_stats(adapter, MacAddress);
1613  *      frame_length--;
1614  *  } else {
1615  *      accept_frame = FALSE;
1616  *  }
1617  *  ...
1618  */
1619 
1620 #define TBI_ACCEPT(adapter, status, errors, length, last_byte) \
1621     ((adapter)->tbi_compatibility_on && \
1622      (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
1623      ((last_byte) == CARRIER_EXTENSION) && \
1624      (((status) & E1000_RXD_STAT_VP) ? \
1625           (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
1626            ((length) <= ((adapter)->max_frame_size + 1))) : \
1627           (((length) > (adapter)->min_frame_size) && \
1628            ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
1629 
1630 
1631 /* Structures, enums, and macros for the PHY */
1632 
1633 /* Bit definitions for the Management Data IO (MDIO) and Management Data
1634  * Clock (MDC) pins in the Device Control Register.
1635  */
1636 #define E1000_CTRL_PHY_RESET_DIR  E1000_CTRL_SWDPIO0
1637 #define E1000_CTRL_PHY_RESET      E1000_CTRL_SWDPIN0
1638 #define E1000_CTRL_MDIO_DIR       E1000_CTRL_SWDPIO2
1639 #define E1000_CTRL_MDIO           E1000_CTRL_SWDPIN2
1640 #define E1000_CTRL_MDC_DIR        E1000_CTRL_SWDPIO3
1641 #define E1000_CTRL_MDC            E1000_CTRL_SWDPIN3
1642 #define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
1643 #define E1000_CTRL_PHY_RESET4     E1000_CTRL_EXT_SDP4_DATA
1644 
1645 /* PHY 1000 MII Register/Bit Definitions */
1646 /* PHY Registers defined by IEEE */
1647 #define PHY_CTRL         0x00 /* Control Register */
1648 #define PHY_STATUS       0x01 /* Status Regiser */
1649 #define PHY_ID1          0x02 /* Phy Id Reg (word 1) */
1650 #define PHY_ID2          0x03 /* Phy Id Reg (word 2) */
1651 #define PHY_AUTONEG_ADV  0x04 /* Autoneg Advertisement */
1652 #define PHY_LP_ABILITY   0x05 /* Link Partner Ability (Base Page) */
1653 #define PHY_AUTONEG_EXP  0x06 /* Autoneg Expansion Reg */
1654 #define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
1655 #define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
1656 #define PHY_1000T_CTRL   0x09 /* 1000Base-T Control Reg */
1657 #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
1658 #define PHY_EXT_STATUS   0x0F /* Extended Status Reg */
1659 
1660 /* M88E1000 Specific Registers */
1661 #define M88E1000_PHY_SPEC_CTRL     0x10  /* PHY Specific Control Register */
1662 #define M88E1000_PHY_SPEC_STATUS   0x11  /* PHY Specific Status Register */
1663 #define M88E1000_INT_ENABLE        0x12  /* Interrupt Enable Register */
1664 #define M88E1000_INT_STATUS        0x13  /* Interrupt Status Register */
1665 #define M88E1000_EXT_PHY_SPEC_CTRL 0x14  /* Extended PHY Specific Control */
1666 #define M88E1000_RX_ERR_CNTR       0x15  /* Receive Error Counter */
1667 
1668 #define M88E1000_PHY_EXT_CTRL      0x1A  /* PHY extend control register */
1669 #define M88E1000_PHY_PAGE_SELECT   0x1D  /* Reg 29 for page number setting */
1670 #define M88E1000_PHY_GEN_CONTROL   0x1E  /* Its meaning depends on reg 29 */
1671 #define M88E1000_PHY_VCO_REG_BIT8  0x100 /* Bits 8 & 11 are adjusted for */
1672 #define M88E1000_PHY_VCO_REG_BIT11 0x800    /* improved BER performance */
1673 
1674 #define IGP01E1000_IEEE_REGS_PAGE  0x0000
1675 #define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
1676 #define IGP01E1000_IEEE_FORCE_GIGA      0x0140
1677 
1678 /* IGP01E1000 Specific Registers */
1679 #define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
1680 #define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
1681 #define IGP01E1000_PHY_PORT_CTRL   0x12 /* PHY Specific Control Register */
1682 #define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
1683 #define IGP01E1000_GMII_FIFO       0x14 /* GMII FIFO Register */
1684 #define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
1685 #define IGP01E1000_PHY_PAGE_SELECT     0x1F /* PHY Page Select Core Register */
1686 
1687 /* IGP01E1000 AGC Registers - stores the cable length values*/
1688 #define IGP01E1000_PHY_AGC_A        0x1172
1689 #define IGP01E1000_PHY_AGC_B        0x1272
1690 #define IGP01E1000_PHY_AGC_C        0x1472
1691 #define IGP01E1000_PHY_AGC_D        0x1872
1692 
1693 /* IGP01E1000 DSP Reset Register */
1694 #define IGP01E1000_PHY_DSP_RESET   0x1F33
1695 #define IGP01E1000_PHY_DSP_SET     0x1F71
1696 #define IGP01E1000_PHY_DSP_FFE     0x1F35
1697 
1698 #define IGP01E1000_PHY_CHANNEL_NUM    4
1699 #define IGP01E1000_PHY_AGC_PARAM_A    0x1171
1700 #define IGP01E1000_PHY_AGC_PARAM_B    0x1271
1701 #define IGP01E1000_PHY_AGC_PARAM_C    0x1471
1702 #define IGP01E1000_PHY_AGC_PARAM_D    0x1871
1703 
1704 #define IGP01E1000_PHY_EDAC_MU_INDEX        0xC000
1705 #define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000
1706 
1707 #define IGP01E1000_PHY_ANALOG_TX_STATE      0x2890
1708 #define IGP01E1000_PHY_ANALOG_CLASS_A       0x2000
1709 #define IGP01E1000_PHY_FORCE_ANALOG_ENABLE  0x0004
1710 #define IGP01E1000_PHY_DSP_FFE_CM_CP        0x0069
1711 
1712 #define IGP01E1000_PHY_DSP_FFE_DEFAULT      0x002A
1713 /* IGP01E1000 PCS Initialization register - stores the polarity status when
1714  * speed = 1000 Mbps. */
1715 #define IGP01E1000_PHY_PCS_INIT_REG  0x00B4
1716 #define IGP01E1000_PHY_PCS_CTRL_REG  0x00B5
1717 
1718 #define IGP01E1000_ANALOG_REGS_PAGE  0x20C0
1719 
1720 #define MAX_PHY_REG_ADDRESS 0x1F        /* 5 bit address bus (0-0x1F) */
1721 #define MAX_PHY_MULTI_PAGE_REG  0xF     /*Registers that are equal on all pages*/
1722 /* PHY Control Register */
1723 #define MII_CR_SPEED_SELECT_MSB 0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
1724 #define MII_CR_COLL_TEST_ENABLE 0x0080  /* Collision test enable */
1725 #define MII_CR_FULL_DUPLEX      0x0100  /* FDX =1, half duplex =0 */
1726 #define MII_CR_RESTART_AUTO_NEG 0x0200  /* Restart auto negotiation */
1727 #define MII_CR_ISOLATE          0x0400  /* Isolate PHY from MII */
1728 #define MII_CR_POWER_DOWN       0x0800  /* Power down */
1729 #define MII_CR_AUTO_NEG_EN      0x1000  /* Auto Neg Enable */
1730 #define MII_CR_SPEED_SELECT_LSB 0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
1731 #define MII_CR_LOOPBACK         0x4000  /* 0 = normal, 1 = loopback */
1732 #define MII_CR_RESET            0x8000  /* 0 = normal, 1 = PHY reset */
1733 
1734 /* PHY Status Register */
1735 #define MII_SR_EXTENDED_CAPS     0x0001 /* Extended register capabilities */
1736 #define MII_SR_JABBER_DETECT     0x0002 /* Jabber Detected */
1737 #define MII_SR_LINK_STATUS       0x0004 /* Link Status 1 = link */
1738 #define MII_SR_AUTONEG_CAPS      0x0008 /* Auto Neg Capable */
1739 #define MII_SR_REMOTE_FAULT      0x0010 /* Remote Fault Detect */
1740 #define MII_SR_AUTONEG_COMPLETE  0x0020 /* Auto Neg Complete */
1741 #define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
1742 #define MII_SR_EXTENDED_STATUS   0x0100 /* Ext. status info in Reg 0x0F */
1743 #define MII_SR_100T2_HD_CAPS     0x0200 /* 100T2 Half Duplex Capable */
1744 #define MII_SR_100T2_FD_CAPS     0x0400 /* 100T2 Full Duplex Capable */
1745 #define MII_SR_10T_HD_CAPS       0x0800 /* 10T   Half Duplex Capable */
1746 #define MII_SR_10T_FD_CAPS       0x1000 /* 10T   Full Duplex Capable */
1747 #define MII_SR_100X_HD_CAPS      0x2000 /* 100X  Half Duplex Capable */
1748 #define MII_SR_100X_FD_CAPS      0x4000 /* 100X  Full Duplex Capable */
1749 #define MII_SR_100T4_CAPS        0x8000 /* 100T4 Capable */
1750 
1751 /* Autoneg Advertisement Register */
1752 #define NWAY_AR_SELECTOR_FIELD 0x0001   /* indicates IEEE 802.3 CSMA/CD */
1753 #define NWAY_AR_10T_HD_CAPS    0x0020   /* 10T   Half Duplex Capable */
1754 #define NWAY_AR_10T_FD_CAPS    0x0040   /* 10T   Full Duplex Capable */
1755 #define NWAY_AR_100TX_HD_CAPS  0x0080   /* 100TX Half Duplex Capable */
1756 #define NWAY_AR_100TX_FD_CAPS  0x0100   /* 100TX Full Duplex Capable */
1757 #define NWAY_AR_100T4_CAPS     0x0200   /* 100T4 Capable */
1758 #define NWAY_AR_PAUSE          0x0400   /* Pause operation desired */
1759 #define NWAY_AR_ASM_DIR        0x0800   /* Asymmetric Pause Direction bit */
1760 #define NWAY_AR_REMOTE_FAULT   0x2000   /* Remote Fault detected */
1761 #define NWAY_AR_NEXT_PAGE      0x8000   /* Next Page ability supported */
1762 
1763 /* Link Partner Ability Register (Base Page) */
1764 #define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
1765 #define NWAY_LPAR_10T_HD_CAPS    0x0020 /* LP is 10T   Half Duplex Capable */
1766 #define NWAY_LPAR_10T_FD_CAPS    0x0040 /* LP is 10T   Full Duplex Capable */
1767 #define NWAY_LPAR_100TX_HD_CAPS  0x0080 /* LP is 100TX Half Duplex Capable */
1768 #define NWAY_LPAR_100TX_FD_CAPS  0x0100 /* LP is 100TX Full Duplex Capable */
1769 #define NWAY_LPAR_100T4_CAPS     0x0200 /* LP is 100T4 Capable */
1770 #define NWAY_LPAR_PAUSE          0x0400 /* LP Pause operation desired */
1771 #define NWAY_LPAR_ASM_DIR        0x0800 /* LP Asymmetric Pause Direction bit */
1772 #define NWAY_LPAR_REMOTE_FAULT   0x2000 /* LP has detected Remote Fault */
1773 #define NWAY_LPAR_ACKNOWLEDGE    0x4000 /* LP has rx'd link code word */
1774 #define NWAY_LPAR_NEXT_PAGE      0x8000 /* Next Page ability supported */
1775 
1776 /* Autoneg Expansion Register */
1777 #define NWAY_ER_LP_NWAY_CAPS      0x0001 /* LP has Auto Neg Capability */
1778 #define NWAY_ER_PAGE_RXD          0x0002 /* LP is 10T   Half Duplex Capable */
1779 #define NWAY_ER_NEXT_PAGE_CAPS    0x0004 /* LP is 10T   Full Duplex Capable */
1780 #define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
1781 #define NWAY_ER_PAR_DETECT_FAULT  0x0010 /* LP is 100TX Full Duplex Capable */
1782 
1783 /* Next Page TX Register */
1784 #define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
1785 #define NPTX_TOGGLE         0x0800 /* Toggles between exchanges
1786                                     * of different NP
1787                                     */
1788 #define NPTX_ACKNOWLDGE2    0x1000 /* 1 = will comply with msg
1789                                     * 0 = cannot comply with msg
1790                                     */
1791 #define NPTX_MSG_PAGE       0x2000 /* formatted(1)/unformatted(0) pg */
1792 #define NPTX_NEXT_PAGE      0x8000 /* 1 = addition NP will follow
1793                                     * 0 = sending last NP
1794                                     */
1795 
1796 /* Link Partner Next Page Register */
1797 #define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
1798 #define LP_RNPR_TOGGLE         0x0800 /* Toggles between exchanges
1799                                        * of different NP
1800                                        */
1801 #define LP_RNPR_ACKNOWLDGE2    0x1000 /* 1 = will comply with msg
1802                                        * 0 = cannot comply with msg
1803                                        */
1804 #define LP_RNPR_MSG_PAGE       0x2000  /* formatted(1)/unformatted(0) pg */
1805 #define LP_RNPR_ACKNOWLDGE     0x4000  /* 1 = ACK / 0 = NO ACK */
1806 #define LP_RNPR_NEXT_PAGE      0x8000  /* 1 = addition NP will follow
1807                                         * 0 = sending last NP
1808                                         */
1809 
1810 /* 1000BASE-T Control Register */
1811 #define CR_1000T_ASYM_PAUSE      0x0080 /* Advertise asymmetric pause bit */
1812 #define CR_1000T_HD_CAPS         0x0100 /* Advertise 1000T HD capability */
1813 #define CR_1000T_FD_CAPS         0x0200 /* Advertise 1000T FD capability  */
1814 #define CR_1000T_REPEATER_DTE    0x0400 /* 1=Repeater/switch device port */
1815                                         /* 0=DTE device */
1816 #define CR_1000T_MS_VALUE        0x0800 /* 1=Configure PHY as Master */
1817                                         /* 0=Configure PHY as Slave */
1818 #define CR_1000T_MS_ENABLE       0x1000 /* 1=Master/Slave manual config value */
1819                                         /* 0=Automatic Master/Slave config */
1820 #define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
1821 #define CR_1000T_TEST_MODE_1     0x2000 /* Transmit Waveform test */
1822 #define CR_1000T_TEST_MODE_2     0x4000 /* Master Transmit Jitter test */
1823 #define CR_1000T_TEST_MODE_3     0x6000 /* Slave Transmit Jitter test */
1824 #define CR_1000T_TEST_MODE_4     0x8000 /* Transmitter Distortion test */
1825 
1826 /* 1000BASE-T Status Register */
1827 #define SR_1000T_IDLE_ERROR_CNT   0x00FF /* Num idle errors since last read */
1828 #define SR_1000T_ASYM_PAUSE_DIR   0x0100 /* LP asymmetric pause direction bit */
1829 #define SR_1000T_LP_HD_CAPS       0x0400 /* LP is 1000T HD capable */
1830 #define SR_1000T_LP_FD_CAPS       0x0800 /* LP is 1000T FD capable */
1831 #define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
1832 #define SR_1000T_LOCAL_RX_STATUS  0x2000 /* Local receiver OK */
1833 #define SR_1000T_MS_CONFIG_RES    0x4000 /* 1=Local TX is Master, 0=Slave */
1834 #define SR_1000T_MS_CONFIG_FAULT  0x8000 /* Master/Slave config fault */
1835 #define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
1836 #define SR_1000T_LOCAL_RX_STATUS_SHIFT  13
1837 #define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT    5
1838 #define FFE_IDLE_ERR_COUNT_TIMEOUT_20            20
1839 #define FFE_IDLE_ERR_COUNT_TIMEOUT_100           100
1840 
1841 /* Extended Status Register */
1842 #define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
1843 #define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
1844 #define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
1845 #define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
1846 
1847 #define PHY_TX_POLARITY_MASK   0x0100 /* register 10h bit 8 (polarity bit) */
1848 #define PHY_TX_NORMAL_POLARITY 0      /* register 10h bit 8 (normal polarity) */
1849 
1850 #define AUTO_POLARITY_DISABLE  0x0010 /* register 11h bit 4 */
1851                                       /* (0=enable, 1=disable) */
1852 
1853 /* M88E1000 PHY Specific Control Register */
1854 #define M88E1000_PSCR_JABBER_DISABLE    0x0001 /* 1=Jabber Function disabled */
1855 #define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
1856 #define M88E1000_PSCR_SQE_TEST          0x0004 /* 1=SQE Test enabled */
1857 #define M88E1000_PSCR_CLK125_DISABLE    0x0010 /* 1=CLK125 low,
1858                                                 * 0=CLK125 toggling
1859                                                 */
1860 #define M88E1000_PSCR_MDI_MANUAL_MODE  0x0000  /* MDI Crossover Mode bits 6:5 */
1861                                                /* Manual MDI configuration */
1862 #define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020  /* Manual MDIX configuration */
1863 #define M88E1000_PSCR_AUTO_X_1000T     0x0040  /* 1000BASE-T: Auto crossover,
1864                                                 *  100BASE-TX/10BASE-T:
1865                                                 *  MDI Mode
1866                                                 */
1867 #define M88E1000_PSCR_AUTO_X_MODE      0x0060  /* Auto crossover enabled
1868                                                 * all speeds.
1869                                                 */
1870 #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
1871                                         /* 1=Enable Extended 10BASE-T distance
1872                                          * (Lower 10BASE-T RX Threshold)
1873                                          * 0=Normal 10BASE-T RX Threshold */
1874 #define M88E1000_PSCR_MII_5BIT_ENABLE      0x0100
1875                                         /* 1=5-Bit interface in 100BASE-TX
1876                                          * 0=MII interface in 100BASE-TX */
1877 #define M88E1000_PSCR_SCRAMBLER_DISABLE    0x0200 /* 1=Scrambler disable */
1878 #define M88E1000_PSCR_FORCE_LINK_GOOD      0x0400 /* 1=Force link good */
1879 #define M88E1000_PSCR_ASSERT_CRS_ON_TX     0x0800 /* 1=Assert CRS on Transmit */
1880 
1881 #define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT    1
1882 #define M88E1000_PSCR_AUTO_X_MODE_SHIFT          5
1883 #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
1884 
1885 /* M88E1000 PHY Specific Status Register */
1886 #define M88E1000_PSSR_JABBER             0x0001 /* 1=Jabber */
1887 #define M88E1000_PSSR_REV_POLARITY       0x0002 /* 1=Polarity reversed */
1888 #define M88E1000_PSSR_DOWNSHIFT          0x0020 /* 1=Downshifted */
1889 #define M88E1000_PSSR_MDIX               0x0040 /* 1=MDIX; 0=MDI */
1890 #define M88E1000_PSSR_CABLE_LENGTH       0x0380 /* 0=<50M;1=50-80M;2=80-110M;
1891                                             * 3=110-140M;4=>140M */
1892 #define M88E1000_PSSR_LINK               0x0400 /* 1=Link up, 0=Link down */
1893 #define M88E1000_PSSR_SPD_DPLX_RESOLVED  0x0800 /* 1=Speed & Duplex resolved */
1894 #define M88E1000_PSSR_PAGE_RCVD          0x1000 /* 1=Page received */
1895 #define M88E1000_PSSR_DPLX               0x2000 /* 1=Duplex 0=Half Duplex */
1896 #define M88E1000_PSSR_SPEED              0xC000 /* Speed, bits 14:15 */
1897 #define M88E1000_PSSR_10MBS              0x0000 /* 00=10Mbs */
1898 #define M88E1000_PSSR_100MBS             0x4000 /* 01=100Mbs */
1899 #define M88E1000_PSSR_1000MBS            0x8000 /* 10=1000Mbs */
1900 
1901 #define M88E1000_PSSR_REV_POLARITY_SHIFT 1
1902 #define M88E1000_PSSR_DOWNSHIFT_SHIFT    5
1903 #define M88E1000_PSSR_MDIX_SHIFT         6
1904 #define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
1905 
1906 /* M88E1000 Extended PHY Specific Control Register */
1907 #define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
1908 #define M88E1000_EPSCR_DOWN_NO_IDLE   0x8000 /* 1=Lost lock detect enabled.
1909                                               * Will assert lost lock and bring
1910                                               * link down if idle not seen
1911                                               * within 1ms in 1000BASE-T
1912                                               */
1913 /* Number of times we will attempt to autonegotiate before downshifting if we
1914  * are the master */
1915 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
1916 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X   0x0000
1917 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X   0x0400
1918 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X   0x0800
1919 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X   0x0C00
1920 /* Number of times we will attempt to autonegotiate before downshifting if we
1921  * are the slave */
1922 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK  0x0300
1923 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS   0x0000
1924 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X    0x0100
1925 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X    0x0200
1926 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X    0x0300
1927 #define M88E1000_EPSCR_TX_CLK_2_5     0x0060 /* 2.5 MHz TX_CLK */
1928 #define M88E1000_EPSCR_TX_CLK_25      0x0070 /* 25  MHz TX_CLK */
1929 #define M88E1000_EPSCR_TX_CLK_0       0x0000 /* NO  TX_CLK */
1930 
1931 /* IGP01E1000 Specific Port Config Register - R/W */
1932 #define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT  0x0010
1933 #define IGP01E1000_PSCFR_PRE_EN                0x0020
1934 #define IGP01E1000_PSCFR_SMART_SPEED           0x0080
1935 #define IGP01E1000_PSCFR_DISABLE_TPLOOPBACK    0x0100
1936 #define IGP01E1000_PSCFR_DISABLE_JABBER        0x0400
1937 #define IGP01E1000_PSCFR_DISABLE_TRANSMIT      0x2000
1938 
1939 /* IGP01E1000 Specific Port Status Register - R/O */
1940 #define IGP01E1000_PSSR_AUTONEG_FAILED         0x0001 /* RO LH SC */
1941 #define IGP01E1000_PSSR_POLARITY_REVERSED      0x0002
1942 #define IGP01E1000_PSSR_CABLE_LENGTH           0x007C
1943 #define IGP01E1000_PSSR_FULL_DUPLEX            0x0200
1944 #define IGP01E1000_PSSR_LINK_UP                0x0400
1945 #define IGP01E1000_PSSR_MDIX                   0x0800
1946 #define IGP01E1000_PSSR_SPEED_MASK             0xC000 /* speed bits mask */
1947 #define IGP01E1000_PSSR_SPEED_10MBPS           0x4000
1948 #define IGP01E1000_PSSR_SPEED_100MBPS          0x8000
1949 #define IGP01E1000_PSSR_SPEED_1000MBPS         0xC000
1950 #define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT     0x0002 /* shift right 2 */
1951 #define IGP01E1000_PSSR_MDIX_SHIFT             0x000B /* shift right 11 */
1952 
1953 /* IGP01E1000 Specific Port Control Register - R/W */
1954 #define IGP01E1000_PSCR_TP_LOOPBACK            0x0001
1955 #define IGP01E1000_PSCR_CORRECT_NC_SCMBLR      0x0200
1956 #define IGP01E1000_PSCR_TEN_CRS_SELECT         0x0400
1957 #define IGP01E1000_PSCR_FLIP_CHIP              0x0800
1958 #define IGP01E1000_PSCR_AUTO_MDIX              0x1000
1959 #define IGP01E1000_PSCR_FORCE_MDI_MDIX         0x2000 /* 0-MDI, 1-MDIX */
1960 
1961 /* IGP01E1000 Specific Port Link Health Register */
1962 #define IGP01E1000_PLHR_SS_DOWNGRADE           0x8000
1963 #define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR    0x4000
1964 #define IGP01E1000_PLHR_GIG_REM_RCVR_NOK       0x0800 /* LH */
1965 #define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW   0x0400 /* LH */
1966 #define IGP01E1000_PLHR_DATA_ERR_1             0x0200 /* LH */
1967 #define IGP01E1000_PLHR_DATA_ERR_0             0x0100
1968 #define IGP01E1000_PLHR_AUTONEG_FAULT          0x0010
1969 #define IGP01E1000_PLHR_AUTONEG_ACTIVE         0x0008
1970 #define IGP01E1000_PLHR_VALID_CHANNEL_D        0x0004
1971 #define IGP01E1000_PLHR_VALID_CHANNEL_C        0x0002
1972 #define IGP01E1000_PLHR_VALID_CHANNEL_B        0x0001
1973 #define IGP01E1000_PLHR_VALID_CHANNEL_A        0x0000
1974 
1975 /* IGP01E1000 Channel Quality Register */
1976 #define IGP01E1000_MSE_CHANNEL_D        0x000F
1977 #define IGP01E1000_MSE_CHANNEL_C        0x00F0
1978 #define IGP01E1000_MSE_CHANNEL_B        0x0F00
1979 #define IGP01E1000_MSE_CHANNEL_A        0xF000
1980 
1981 /* IGP01E1000 DSP reset macros */
1982 #define DSP_RESET_ENABLE     0x0
1983 #define DSP_RESET_DISABLE    0x2
1984 #define E1000_MAX_DSP_RESETS 10
1985 
1986 /* IGP01E1000 AGC Registers */
1987 
1988 #define IGP01E1000_AGC_LENGTH_SHIFT 7         /* Coarse - 13:11, Fine - 10:7 */
1989 
1990 /* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */
1991 #define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128
1992 
1993 /* The precision of the length is +/- 10 meters */
1994 #define IGP01E1000_AGC_RANGE    10
1995 
1996 /* IGP01E1000 PCS Initialization register */
1997 /* bits 3:6 in the PCS registers stores the channels polarity */
1998 #define IGP01E1000_PHY_POLARITY_MASK    0x0078
1999 
2000 /* IGP01E1000 GMII FIFO Register */
2001 #define IGP01E1000_GMII_FLEX_SPD               0x10 /* Enable flexible speed
2002                                                      * on Link-Up */
2003 #define IGP01E1000_GMII_SPD                    0x20 /* Enable SPD */
2004 
2005 /* IGP01E1000 Analog Register */
2006 #define IGP01E1000_ANALOG_SPARE_FUSE_STATUS         0x20D1
2007 #define IGP01E1000_ANALOG_FUSE_STATUS               0x20D0
2008 #define IGP01E1000_ANALOG_FUSE_CONTROL              0x20DC
2009 #define IGP01E1000_ANALOG_FUSE_BYPASS               0x20DE
2010 
2011 #define IGP01E1000_ANALOG_FUSE_POLY_MASK            0xF000
2012 #define IGP01E1000_ANALOG_FUSE_FINE_MASK            0x0F80
2013 #define IGP01E1000_ANALOG_FUSE_COARSE_MASK          0x0070
2014 #define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED        0x0100
2015 #define IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL    0x0002
2016 
2017 #define IGP01E1000_ANALOG_FUSE_COARSE_THRESH        0x0040
2018 #define IGP01E1000_ANALOG_FUSE_COARSE_10            0x0010
2019 #define IGP01E1000_ANALOG_FUSE_FINE_1               0x0080
2020 #define IGP01E1000_ANALOG_FUSE_FINE_10              0x0500
2021 
2022 /* Bit definitions for valid PHY IDs. */
2023 #define M88E1000_E_PHY_ID  0x01410C50
2024 #define M88E1000_I_PHY_ID  0x01410C30
2025 #define M88E1011_I_PHY_ID  0x01410C20
2026 #define IGP01E1000_I_PHY_ID  0x02A80380
2027 #define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
2028 #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
2029 #define M88E1011_I_REV_4   0x04
2030 
2031 /* Miscellaneous PHY bit definitions. */
2032 #define PHY_PREAMBLE        0xFFFFFFFF
2033 #define PHY_SOF             0x01
2034 #define PHY_OP_READ         0x02
2035 #define PHY_OP_WRITE        0x01
2036 #define PHY_TURNAROUND      0x02
2037 #define PHY_PREAMBLE_SIZE   32
2038 #define MII_CR_SPEED_1000   0x0040
2039 #define MII_CR_SPEED_100    0x2000
2040 #define MII_CR_SPEED_10     0x0000
2041 #define E1000_PHY_ADDRESS   0x01
2042 #define PHY_AUTO_NEG_TIME   45  /* 4.5 Seconds */
2043 #define PHY_FORCE_TIME      20  /* 2.0 Seconds */
2044 #define PHY_REVISION_MASK   0xFFFFFFF0
2045 #define DEVICE_SPEED_MASK   0x00000300  /* Device Ctrl Reg Speed Mask */
2046 #define REG4_SPEED_MASK     0x01E0
2047 #define REG9_SPEED_MASK     0x0300
2048 #define ADVERTISE_10_HALF   0x0001
2049 #define ADVERTISE_10_FULL   0x0002
2050 #define ADVERTISE_100_HALF  0x0004
2051 #define ADVERTISE_100_FULL  0x0008
2052 #define ADVERTISE_1000_HALF 0x0010
2053 #define ADVERTISE_1000_FULL 0x0020
2054 #define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F  /* Everything but 1000-Half */
2055 #define AUTONEG_ADVERTISE_10_100_ALL    0x000F	/* All 10/100 speeds*/
2056 #define AUTONEG_ADVERTISE_10_ALL        0x0003	/* 10Mbps Full & Half speeds*/
2057 
2058 #endif /* _E1000_HW_H_ */
2059