/* * This file and its contents are supplied under the terms of the * Common Development and Distribution License ("CDDL"), version 1.0. * You may only use this file in accordance with the terms of version * 1.0 of the CDDL. * * A full copy of the text of the CDDL should have accompanied this * source. A copy of the CDDL is also available via the Internet at * http://www.illumos.org/license/CDDL. */ /* * Copyright 2019 Joyent, Inc. * Copyright 2021 Oxide Computer Company */ /* * Intel Platform Controller Hub (PCH) Thermal Sensor Driver * * The Intel PCH is a chip that was introduced around the Nehalem generation * that provides many services for the broader system on a discrete chip from * the CPU. While it existed prior to the Nehalem generation, it was previously * two discrete chips called the Northbridge and Southbridge. Sometimes this * device is also called a 'chipset'. * * The PCH contains everything from a USB controller, to an AHCI controller, to * clocks, the Intel Management Engine, and more. Relevant to this driver is its * thermal sensor which gives us the ability to read the temperature sensor that * is embedded in the PCH. * * The format of this sensor varies based on the generation of the chipset. The * current driver supports the following chipsets organized by datasheet, which * corresponds with a change in format that was introduced in the Haswell * generation: * * - Intel 8 Series PCH * - Intel 9 Series and Broadwell Mobile Low Power PCH * - Intel C610 Series and X99 PCH * - Intel C620 Series PCH * - Intel 100 Series PCH * - Intel 200 Series and Z730 PCH * - Intel Sunrise Point-LP (Kaby Lake-U) PCH * - Intel Cannon Lake (Whiskey Lake-U) PCH * - Intel 300 Series and C240 Chipset * - Intel 400 Series and On-Package PCH * * The following chipsets use a different format and are not currently * supported: * * - Intel 5 Series and Xeon 3400 PCH * - Intel 6 Series PCH * - Intel 7 Series PCH * - Intel C600 Series and X79 PCH */ #include #include #include #include #include #include #include #include #include #include #include #include /* * In all cases the data we care about is in the first PCI bar, bar 0. Per * pci(4)/pcie(4), this is always going to be register number 1. */ #define PCHTEMP_RNUMBER 1 /* * The PCH Temperature Sensor has a resolution of 1/2 a degree. This is a * resolution of 2 in our parlance. The register reads 50 C higher than it is. * Therefore our offset is 50 shifted over by one. */ #define PCHTEMP_TEMP_RESOLUTION 2 #define PCHTEMP_TEMP_OFFSET (50 << 1) /* * This register offset has the temperature that we want to read in the lower * 8-bits. The resolution and offset are described above. */ #define PCHTEMP_REG_TEMP 0x00 #define PCHTEMP_REG_TEMP_TSR 0x00ff /* * Thermal Sensor Enable and Lock (TSEL) register. This register is a byte wide * and has two bits that we care about. The ETS bit, enable thermal sensor, * indicates whether or not the sensor is enabled. The control for this can be * locked which is the PLDB, Policy Lock-Down Bit, bit. Which restricts * additional control of this register. */ #define PCHTEMP_REG_TSEL 0x08 #define PCHTEMP_REG_TSEL_ETS 0x01 #define PCHTEMP_REG_TSEL_PLDB 0x80 /* * Threshold registers for the thermal sensors. These indicate the catastrophic, * the high alert threshold, and the low alert threshold respectively. */ #define PCHTEMP_REG_CTT 0x10 #define PCHTEMP_REG_TAHV 0x14 #define PCHTEMP_REG_TALV 0x18 typedef struct pchtemp { dev_info_t *pcht_dip; int pcht_fm_caps; caddr_t pcht_base; ddi_acc_handle_t pcht_handle; id_t pcht_ksensor; kmutex_t pcht_mutex; /* Protects members below */ uint16_t pcht_temp_raw; uint8_t pcht_tsel_raw; uint16_t pcht_ctt_raw; uint16_t pcht_tahv_raw; uint16_t pcht_talv_raw; int64_t pcht_temp; } pchtemp_t; void *pchtemp_state; static int pchtemp_read_check(pchtemp_t *pch) { ddi_fm_error_t de; if (!DDI_FM_ACC_ERR_CAP(pch->pcht_fm_caps)) { return (DDI_FM_OK); } ddi_fm_acc_err_get(pch->pcht_handle, &de, DDI_FME_VERSION); ddi_fm_acc_err_clear(pch->pcht_handle, DDI_FME_VERSION); return (de.fme_status); } static int pchtemp_read(void *arg, sensor_ioctl_scalar_t *scalar) { uint16_t temp, ctt, tahv, talv; uint8_t tsel; pchtemp_t *pch = arg; mutex_enter(&pch->pcht_mutex); temp = ddi_get16(pch->pcht_handle, (uint16_t *)((uintptr_t)pch->pcht_base + PCHTEMP_REG_TEMP)); tsel = ddi_get8(pch->pcht_handle, (uint8_t *)((uintptr_t)pch->pcht_base + PCHTEMP_REG_TSEL)); ctt = ddi_get16(pch->pcht_handle, (uint16_t *)((uintptr_t)pch->pcht_base + PCHTEMP_REG_CTT)); tahv = ddi_get16(pch->pcht_handle, (uint16_t *)((uintptr_t)pch->pcht_base + PCHTEMP_REG_TAHV)); talv = ddi_get16(pch->pcht_handle, (uint16_t *)((uintptr_t)pch->pcht_base + PCHTEMP_REG_TALV)); if (pchtemp_read_check(pch) != DDI_FM_OK) { mutex_exit(&pch->pcht_mutex); dev_err(pch->pcht_dip, CE_WARN, "failed to read temperature " "data due to FM device error"); return (EIO); } pch->pcht_temp_raw = temp; pch->pcht_tsel_raw = tsel; pch->pcht_ctt_raw = ctt; pch->pcht_tahv_raw = tahv; pch->pcht_talv_raw = talv; if ((tsel & PCHTEMP_REG_TSEL_ETS) == 0) { mutex_exit(&pch->pcht_mutex); return (ENXIO); } pch->pcht_temp = (temp & PCHTEMP_REG_TEMP_TSR) - PCHTEMP_TEMP_OFFSET; scalar->sis_unit = SENSOR_UNIT_CELSIUS; scalar->sis_gran = PCHTEMP_TEMP_RESOLUTION; scalar->sis_value = pch->pcht_temp; mutex_exit(&pch->pcht_mutex); return (0); } static const ksensor_ops_t pchtemp_temp_ops = { .kso_kind = ksensor_kind_temperature, .kso_scalar = pchtemp_read }; static void pchtemp_cleanup(pchtemp_t *pch) { int inst; ASSERT3P(pch->pcht_dip, !=, NULL); inst = ddi_get_instance(pch->pcht_dip); (void) ksensor_remove(pch->pcht_dip, KSENSOR_ALL_IDS); if (pch->pcht_handle != NULL) { ddi_regs_map_free(&pch->pcht_handle); } if (pch->pcht_fm_caps != DDI_FM_NOT_CAPABLE) { ddi_fm_fini(pch->pcht_dip); } mutex_destroy(&pch->pcht_mutex); ddi_soft_state_free(pchtemp_state, inst); } static int pchtemp_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) { int inst, ret; pchtemp_t *pch; off_t memsize; ddi_device_acc_attr_t da; ddi_iblock_cookie_t iblk; char name[1024]; switch (cmd) { case DDI_RESUME: return (DDI_SUCCESS); case DDI_ATTACH: break; default: return (DDI_FAILURE); } inst = ddi_get_instance(dip); if (ddi_soft_state_zalloc(pchtemp_state, inst) != DDI_SUCCESS) { dev_err(dip, CE_WARN, "failed to allocate soft state entry %d", inst); return (DDI_FAILURE); } pch = ddi_get_soft_state(pchtemp_state, inst); if (pch == NULL) { dev_err(dip, CE_WARN, "failed to retrieve soft state entry %d", inst); return (DDI_FAILURE); } pch->pcht_dip = dip; pch->pcht_fm_caps = DDI_FM_ACCCHK_CAPABLE; ddi_fm_init(dip, &pch->pcht_fm_caps, &iblk); mutex_init(&pch->pcht_mutex, NULL, MUTEX_DRIVER, NULL); if (ddi_dev_regsize(dip, PCHTEMP_RNUMBER, &memsize) != DDI_SUCCESS) { dev_err(dip, CE_WARN, "failed to obtain register size for " "register set %d", PCHTEMP_RNUMBER); goto err; } bzero(&da, sizeof (ddi_device_acc_attr_t)); da.devacc_attr_version = DDI_DEVICE_ATTR_V0; da.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC; da.devacc_attr_dataorder = DDI_STRICTORDER_ACC; if (DDI_FM_ACC_ERR_CAP(pch->pcht_fm_caps)) { da.devacc_attr_access = DDI_FLAGERR_ACC; } else { da.devacc_attr_access = DDI_DEFAULT_ACC; } if ((ret = ddi_regs_map_setup(dip, PCHTEMP_RNUMBER, &pch->pcht_base, 0, memsize, &da, &pch->pcht_handle)) != DDI_SUCCESS) { dev_err(dip, CE_WARN, "failed to map register set %d: %d", PCHTEMP_RNUMBER, ret); goto err; } if (snprintf(name, sizeof (name), "ts.%d", inst) >= sizeof (name)) { dev_err(dip, CE_WARN, "failed to construct minor node name, " "name too long"); goto err; } if ((ret = ksensor_create(pch->pcht_dip, &pchtemp_temp_ops, pch, name, DDI_NT_SENSOR_TEMP_PCH, &pch->pcht_ksensor)) != 0) { dev_err(dip, CE_WARN, "failed to create minor node %s", name); goto err; } return (DDI_SUCCESS); err: pchtemp_cleanup(pch); return (DDI_FAILURE); } static int pchtemp_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) { int inst; pchtemp_t *pch; switch (cmd) { case DDI_DETACH: break; case DDI_SUSPEND: return (DDI_SUCCESS); default: return (DDI_FAILURE); } inst = ddi_get_instance(dip); pch = ddi_get_soft_state(pchtemp_state, inst); if (pch == NULL) { dev_err(dip, CE_WARN, "asked to detached instance %d, but " "it does not exist in soft state", inst); return (DDI_FAILURE); } pchtemp_cleanup(pch); return (DDI_SUCCESS); } static struct dev_ops pchtemp_dev_ops = { .devo_rev = DEVO_REV, .devo_refcnt = 0, .devo_getinfo = nodev, .devo_identify = nulldev, .devo_probe = nulldev, .devo_attach = pchtemp_attach, .devo_detach = pchtemp_detach, .devo_reset = nodev, .devo_quiesce = ddi_quiesce_not_needed }; static struct modldrv pchtemp_modldrv = { .drv_modops = &mod_driverops, .drv_linkinfo = "Intel PCH Thermal Sensor", .drv_dev_ops = &pchtemp_dev_ops }; static struct modlinkage pchtemp_modlinkage = { .ml_rev = MODREV_1, .ml_linkage = { &pchtemp_modldrv, NULL } }; int _init(void) { int ret; if (ddi_soft_state_init(&pchtemp_state, sizeof (pchtemp_t), 1) != DDI_SUCCESS) { return (ENOMEM); } if ((ret = mod_install(&pchtemp_modlinkage)) != 0) { ddi_soft_state_fini(&pchtemp_state); return (ret); } return (ret); } int _info(struct modinfo *modinfop) { return (mod_info(&pchtemp_modlinkage, modinfop)); } int _fini(void) { int ret; if ((ret = mod_remove(&pchtemp_modlinkage)) != 0) { return (ret); } ddi_soft_state_fini(&pchtemp_state); return (ret); }