/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2010 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Copyright 2014 Garrett D'Amore */ /* * SCSI device structure. * * All SCSI target drivers will have one of these per target/lun/sfunc. * It is allocated and initialized by the framework SCSA HBA nexus code * for each SCSI target dev_info_t node during HBA nexus DDI_CTLOPS_INITCHILD * processing of a child device node just prior to tran_tgt_init(9E). A * pointer the the scsi_device(9S) structure is stored in the * driver-private data field of the target device's dev_info_t node (in * 'devi_driver_data') and can be retrieved by ddi_get_driver_private(9F). */ #ifndef _SYS_SCSI_CONF_DEVICE_H #define _SYS_SCSI_CONF_DEVICE_H #include #ifdef __cplusplus extern "C" { #endif struct scsi_device { /* * Routing information for a SCSI device (target/lun/sfunc). * * The scsi_address(9S) structure contains a pointer to the * scsi_hba_tran(9S) of the transport. * * For devices below an HBA that uses SCSI_HBA_ADDR_SPI * unit-addressing, the scsi_address(9S) information contains * decoded target/lun addressing information. * * For devices below an HBA that uses SCSI_HBA_ADDR_COMPLEX * unit-addressing, the scsi_address(9S) information contains a * pointer to the scsi_device(9S) structure and the HBA can maintain * its private per-unit-address/per-scsi_device information using * scsi_address_device(9F) and scsi_device_hba_private_[gs]et(9F). * * NOTE: The scsi_address(9S) structure gets structure-copied into * the scsi_pkt(9S) 'pkt_address' field. Having a pointer to the * scsi_device(9S) structure within the scsi_address(9S) allows * the SCSA framework to reflect generic changes in device state * at scsi_pkt_comp(9F) time (given just a scsi_pkt(9S) pointer). * * NOTE: The older SCSI_HBA_TRAN_CLONE method of supporting * SCSI-3 devices is still supported, but use is discouraged. */ struct scsi_address sd_address; /* Cross-reference to target device's dev_info_t. */ dev_info_t *sd_dev; /* * Target driver mutex for this device. Initialized by SCSA HBA * framework code prior to probe(9E) or attach(9E) of scsi_device. */ kmutex_t sd_mutex; /* * SCSA private: use is associated with implementation of * SCSI_HBA_ADDR_COMPLEX scsi_device_hba_private_[gs]et(9F). * The HBA driver can store a pointer to per-scsi_device(9S) * HBA private data during its tran_tgt_init(9E) implementation * by calling scsi_device_hba_private_set(9F), and free that * pointer during tran_tgt_fini(9E). At tran_send(9E) time, the * HBA driver can use scsi_address_device(9F) to obtain a pointer * to the scsi_device(9S) structure, and then gain access to * its per-scsi_device(9S) hba private data by calling * scsi_device_hba_private_get(9F). */ void *sd_hba_private; /* * If scsi_slave is used to probe out this device, a scsi_inquiry data * structure will be allocated and an INQUIRY command will be run to * fill it in. * * The inquiry data is allocated/refreshed by scsi_probe/scsi_slave * and freed by uninitchild (inquiry data is no longer freed by * scsi_unprobe/scsi_unslave). * * NOTE: Additional device identity information may be available * as properties of sd_dev. */ struct scsi_inquiry *sd_inq; /* * Place to point to an extended request sense buffer. * The target driver is responsible for managing this. */ struct scsi_extended_sense *sd_sense; /* * Target driver 'private' information. Typically a pointer to target * driver private ddi_soft_state(9F) information for the device. This * information is typically established in target driver attach(9E), * and freed in the target driver detach(9E). * * LEGACY: For a scsi_device structure allocated by scsi_vhci during * online of a path, this was set by scsi_vhci to point to the * pathinfo node. Please use sd_pathinfo instead. */ void *sd_private; /* * FMA capabilities of scsi_device. */ int sd_fm_capable; /* * mdi_pathinfo_t pointer to pathinfo node for scsi_device structure * allocated by the scsi_vhci for transport to a specific pHCI path. */ void *sd_pathinfo; /* * sd_uninit_prevent - Counter that prevents demotion of * DS_INITIALIZED node (esp loss of devi_addr) by causing * DDI_CTLOPS_UNINITCHILD failure - devi_ref will not protect * demotion of DS_INITIALIZED node. * * sd_tran_tgt_free_done - in some cases SCSA will call * tran_tgt_free(9E) independent of devinfo node state, this means * that uninitchild code should not call tran_tgt_free(9E). */ unsigned sd_uninit_prevent:16, sd_tran_tgt_free_done:1, sd_flags_pad:15; /* * The 'sd_tran_safe' field is a grotty hack that allows direct-access * (non-scsa) drivers (like chs, ata, and mlx - which all make cmdk * children) to *illegally* put their own vector in the scsi_address(9S) * 'a_hba_tran' field. When all the drivers that overwrite * 'a_hba_tran' are fixed, we can remove sd_tran_safe (and make * scsi_hba.c code trust that the 'sd_address.a_hba_tran' established * during initchild is still valid when uninitchild occurs). * * NOTE: This hack is also shows up in the DEVP_TO_TRAN implementation * in scsi_confsubr.c. * * NOTE: The 'sd_tran_safe' field is only referenced by SCSA framework * code, so always keeping it at the end of the scsi_device structure * (until it can be removed) is OK. It use to be called 'sd_reserved'. */ struct scsi_hba_tran *sd_tran_safe; #ifdef SCSI_SIZE_CLEAN_VERIFY /* * Must be last: Building a driver with-and-without * -DSCSI_SIZE_CLEAN_VERIFY, and checking driver modules for * differences with a tools like 'wsdiff' allows a developer to verify * that their driver has no dependencies on scsi*(9S) size. */ int _pad[8]; #endif /* SCSI_SIZE_CLEAN_VERIFY */ }; #ifdef _KERNEL /* ==== The following interfaces are public ==== */ int scsi_probe(struct scsi_device *sd, int (*callback)(void)); void scsi_unprobe(struct scsi_device *sd); /* ==== The following interfaces are private (currently) ==== */ char *scsi_device_unit_address(struct scsi_device *sd); /* * scsi_device_prop_*() property interfaces: flags * * SCSI_DEVICE_PROP_PATH: property of path-to-device. * The property is associated with the sd_pathinfo pathinfo node * as established by scsi_vhci. If sd_pathinfo is NULL then the * property is associated with the sd_dev devinfo node. * Implementation uses mdi_prop_*() interfaces applied to * mdi_pathinfo_t (sd_pathinfo) nodes. * * SCSI_DEVICE_PROP_DEVICE: property of device. * The property is always associated with the sd_dev devinfo * node. Implementation uses ndi_prop_*() interfaces applied * dev_info_t (sd_dev) nodes. */ #define SCSI_DEVICE_PROP_PATH 0x1 /* type is property-of-path */ #define SCSI_DEVICE_PROP_DEVICE 0x2 /* type is property-of-device */ #define SCSI_DEVICE_PROP_TYPE_MSK 0xF int scsi_device_prop_get_int(struct scsi_device *sd, uint_t flags, char *name, int defvalue); int64_t scsi_device_prop_get_int64(struct scsi_device *, uint_t flags, char *name, int64_t defvalue); int scsi_device_prop_lookup_byte_array(struct scsi_device *sd, uint_t flags, char *name, uchar_t **, uint_t *); int scsi_device_prop_lookup_int_array(struct scsi_device *sd, uint_t flags, char *name, int **, uint_t *); int scsi_device_prop_lookup_string(struct scsi_device *sd, uint_t flags, char *name, char **); int scsi_device_prop_lookup_string_array(struct scsi_device *sd, uint_t flags, char *name, char ***, uint_t *); int scsi_device_prop_update_byte_array(struct scsi_device *sd, uint_t flags, char *name, uchar_t *, uint_t); int scsi_device_prop_update_int(struct scsi_device *sd, uint_t flags, char *name, int); int scsi_device_prop_update_int64(struct scsi_device *sd, uint_t flags, char *name, int64_t); int scsi_device_prop_update_int_array(struct scsi_device *sd, uint_t flags, char *name, int *, uint_t); int scsi_device_prop_update_string(struct scsi_device *sd, uint_t flags, char *name, char *); int scsi_device_prop_update_string_array(struct scsi_device *sd, uint_t flags, char *name, char **, uint_t); int scsi_device_prop_remove(struct scsi_device *sd, uint_t flags, char *name); void scsi_device_prop_free(struct scsi_device *sd, uint_t flags, void *data); /* SCSI_HBA_ADDR_COMPLEX interfaces */ struct scsi_device *scsi_address_device(struct scsi_address *sa); void scsi_device_hba_private_set(struct scsi_device *sd, void *data); void *scsi_device_hba_private_get(struct scsi_device *sd); /* ==== The following interfaces are private ==== */ size_t scsi_device_size(); /* ==== The following interfaces are obsolete ==== */ int scsi_slave(struct scsi_device *sd, int (*callback)(void)); void scsi_unslave(struct scsi_device *sd); #endif /* _KERNEL */ #ifdef __cplusplus } #endif #endif /* _SYS_SCSI_CONF_DEVICE_H */