/* * Copyright 2010 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Copyright (c) 2008 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include #include #include #include #include #include #include "arn_core.h" /* * Associates the beacon frame buffer with a transmit descriptor. Will set * up all required antenna switch parameters, rate codes, and channel flags. * Beacons are always sent out at the lowest rate, and are not retried. */ #ifdef ARN_IBSS static void arn_beacon_setup(struct arn_softc *sc, struct ath_buf *bf) { #define USE_SHPREAMBLE(_ic) \ (((_ic)->ic_flags & (IEEE80211_F_SHPREAMBLE | IEEE80211_F_USEBARKER))\ == IEEE80211_F_SHPREAMBLE) mblk_t *mp = bf->bf_m; struct ath_hal *ah = sc->sc_ah; struct ath_desc *ds; /* LINTED E_FUNC_SET_NOT_USED */ int flags, antenna = 0; struct ath_rate_table *rt; uint8_t rix, rate; struct ath9k_11n_rate_series series[4]; int ctsrate = 0; int ctsduration = 0; /* set up descriptors */ ds = bf->bf_desc; flags = ATH9K_TXDESC_NOACK; if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS && (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) { ds->ds_link = bf->bf_daddr; /* self-linked */ flags |= ATH9K_TXDESC_VEOL; /* * Let hardware handle antenna switching. */ antenna = 0; } else { ds->ds_link = 0; /* * Switch antenna every 4 beacons. * NB: assumes two antenna */ antenna = ((sc->ast_be_xmit / sc->sc_nbcnvaps) & 1 ? 2 : 1); } ds->ds_data = bf->bf_dma.cookie.dmac_address; /* * Calculate rate code. * XXX everything at min xmit rate */ rix = 0; rt = sc->hw_rate_table[sc->sc_curmode]; rate = rt->info[rix].ratecode; if (sc->sc_flags & SC_OP_PREAMBLE_SHORT) rate |= rt->info[rix].short_preamble; ath9k_hw_set11n_txdesc(ah, ds, MBLKL(mp) + IEEE80211_CRC_LEN, /* frame length */ ATH9K_PKT_TYPE_BEACON, /* Atheros packet type */ MAX_RATE_POWER, /* FIXME */ ATH9K_TXKEYIX_INVALID, /* no encryption */ ATH9K_KEY_TYPE_CLEAR, /* no encryption */ flags); /* no ack, veol for beacons */ /* NB: beacon's BufLen must be a multiple of 4 bytes */ (void) ath9k_hw_filltxdesc(ah, ds, roundup(MBLKL(mp), 4), /* buffer length */ B_TRUE, /* first segment */ B_TRUE, /* last segment */ ds); /* first descriptor */ (void) memset(series, 0, sizeof (struct ath9k_11n_rate_series) * 4); series[0].Tries = 1; series[0].Rate = rate; series[0].ChSel = sc->sc_tx_chainmask; series[0].RateFlags = (ctsrate) ? ATH9K_RATESERIES_RTS_CTS : 0; ath9k_hw_set11n_ratescenario(ah, ds, ds, 0, ctsrate, ctsduration, series, 4, 0); #undef USE_SHPREAMBLE } #endif /* * Startup beacon transmission for adhoc mode when they are sent entirely * by the hardware using the self-linked descriptor + veol trick. */ #ifdef ARN_IBSS static void arn_beacon_start_adhoc(struct arn_softc *sc) { struct ath_buf *bf = list_head(&sc->sc_bcbuf_list); struct ieee80211_node *in = bf->bf_in; struct ieee80211com *ic = in->in_ic; struct ath_hal *ah = sc->sc_ah; mblk_t *mp; mp = bf->bf_m; if (ieee80211_beacon_update(ic, bf->bf_in, &sc->asc_boff, mp, 0)) bcopy(mp->b_rptr, bf->bf_dma.mem_va, MBLKL(mp)); /* Construct tx descriptor. */ arn_beacon_setup(sc, bf); /* * Stop any current dma and put the new frame on the queue. * This should never fail since we check above that no frames * are still pending on the queue. */ if (!ath9k_hw_stoptxdma(ah, sc->sc_beaconq)) { arn_problem("ath: beacon queue %d did not stop?\n", sc->sc_beaconq); } ARN_DMA_SYNC(bf->bf_dma, DDI_DMA_SYNC_FORDEV); /* NB: caller is known to have already stopped tx dma */ (void) ath9k_hw_puttxbuf(ah, sc->sc_beaconq, bf->bf_daddr); (void) ath9k_hw_txstart(ah, sc->sc_beaconq); ARN_DBG((ARN_DBG_BEACON, "arn: arn_bstuck_process(): " "TXDP%u = %llx (%p)\n", sc->sc_beaconq, ito64(bf->bf_daddr), bf->bf_desc)); } #endif /* ARN_IBSS */ uint32_t arn_beaconq_setup(struct ath_hal *ah) { struct ath9k_tx_queue_info qi; (void) memset(&qi, 0, sizeof (qi)); qi.tqi_aifs = 1; qi.tqi_cwmin = 0; qi.tqi_cwmax = 0; /* NB: don't enable any interrupts */ return (ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi)); } int arn_beacon_alloc(struct arn_softc *sc, struct ieee80211_node *in) { ieee80211com_t *ic = in->in_ic; struct ath_buf *bf; mblk_t *mp; mutex_enter(&sc->sc_bcbuflock); bf = list_head(&sc->sc_bcbuf_list); if (bf == NULL) { arn_problem("arn: arn_beacon_alloc():" "no dma buffers"); mutex_exit(&sc->sc_bcbuflock); return (ENOMEM); } mp = ieee80211_beacon_alloc(ic, in, &sc->asc_boff); if (mp == NULL) { arn_problem("ath: arn_beacon_alloc():" "cannot get mbuf\n"); mutex_exit(&sc->sc_bcbuflock); return (ENOMEM); } ASSERT(mp->b_cont == NULL); bf->bf_m = mp; bcopy(mp->b_rptr, bf->bf_dma.mem_va, MBLKL(mp)); bf->bf_in = ieee80211_ref_node(in); mutex_exit(&sc->sc_bcbuflock); return (0); } void arn_beacon_return(struct arn_softc *sc) { struct ath_buf *bf; mutex_enter(&sc->sc_bcbuflock); bf = list_head(&sc->sc_bcbuf_list); while (bf != NULL) { if (bf->bf_m != NULL) { freemsg(bf->bf_m); bf->bf_m = NULL; } if (bf->bf_in != NULL) { ieee80211_free_node(bf->bf_in); bf->bf_in = NULL; } bf = list_next(&sc->sc_bcbuf_list, bf); } mutex_exit(&sc->sc_bcbuflock); } void arn_beacon_config(struct arn_softc *sc) { struct ath_beacon_config conf; ieee80211com_t *ic = (ieee80211com_t *)sc; struct ieee80211_node *in = ic->ic_bss; /* New added */ struct ath9k_beacon_state bs; int dtimperiod, dtimcount, sleepduration; int cfpperiod, cfpcount; uint32_t nexttbtt = 0, intval, tsftu; uint64_t tsf; (void) memset(&conf, 0, sizeof (struct ath_beacon_config)); /* XXX fix me */ conf.beacon_interval = in->in_intval ? in->in_intval : ATH_DEFAULT_BINTVAL; ARN_DBG((ARN_DBG_BEACON, "arn: arn_beacon_config():" "conf.beacon_interval = %d\n", conf.beacon_interval)); conf.listen_interval = 1; conf.dtim_period = conf.beacon_interval; conf.dtim_count = 1; conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval; (void) memset(&bs, 0, sizeof (bs)); intval = conf.beacon_interval & ATH9K_BEACON_PERIOD; /* * Setup dtim and cfp parameters according to * last beacon we received (which may be none). */ dtimperiod = conf.dtim_period; if (dtimperiod <= 0) /* NB: 0 if not known */ dtimperiod = 1; dtimcount = conf.dtim_count; if (dtimcount >= dtimperiod) /* NB: sanity check */ dtimcount = 0; cfpperiod = 1; /* NB: no PCF support yet */ cfpcount = 0; sleepduration = conf.listen_interval * intval; if (sleepduration <= 0) sleepduration = intval; /* * Pull nexttbtt forward to reflect the current * TSF and calculate dtim+cfp state for the result. */ tsf = ath9k_hw_gettsf64(sc->sc_ah); tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE; do { nexttbtt += intval; if (--dtimcount < 0) { dtimcount = dtimperiod - 1; if (--cfpcount < 0) cfpcount = cfpperiod - 1; } } while (nexttbtt < tsftu); bs.bs_intval = intval; bs.bs_nexttbtt = nexttbtt; bs.bs_dtimperiod = dtimperiod*intval; bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval; bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod; bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod; bs.bs_cfpmaxduration = 0; /* * Calculate the number of consecutive beacons to miss* before taking * a BMISS interrupt. The configuration is specified in TU so we only * need calculate based on the beacon interval. Note that we clamp the * result to at most 15 beacons. */ if (sleepduration > intval) { bs.bs_bmissthreshold = conf.listen_interval * ATH_DEFAULT_BMISS_LIMIT / 2; } else { bs.bs_bmissthreshold = DIV_ROUND_UP(conf.bmiss_timeout, intval); if (bs.bs_bmissthreshold > 15) bs.bs_bmissthreshold = 15; else if (bs.bs_bmissthreshold == 0) bs.bs_bmissthreshold = 1; } /* * Calculate sleep duration. The configuration is given in ms. * We ensure a multiple of the beacon period is used. Also, if the sleep * duration is greater than the DTIM period then it makes senses * to make it a multiple of that. * * XXX fixed at 100ms */ bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100), sleepduration); if (bs.bs_sleepduration > bs.bs_dtimperiod) bs.bs_sleepduration = bs.bs_dtimperiod; /* TSF out of range threshold fixed at 1 second */ bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD; ARN_DBG((ARN_DBG_BEACON, "arn: arn_beacon_config(): " "tsf %llu " "tsf:tu %u " "intval %u " "nexttbtt %u " "dtim %u " "nextdtim %u " "bmiss %u " "sleep %u " "cfp:period %u " "maxdur %u " "next %u " "timoffset %u\n", (unsigned long long)tsf, tsftu, bs.bs_intval, bs.bs_nexttbtt, bs.bs_dtimperiod, bs.bs_nextdtim, bs.bs_bmissthreshold, bs.bs_sleepduration, bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext, bs.bs_timoffset)); /* Set the computed STA beacon timers */ (void) ath9k_hw_set_interrupts(sc->sc_ah, 0); ath9k_hw_set_sta_beacon_timers(sc->sc_ah, &bs); sc->sc_imask |= ATH9K_INT_BMISS; (void) ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask); } void ath_beacon_sync(struct arn_softc *sc) { /* * Resync beacon timers using the tsf of the * beacon frame we just received. */ arn_beacon_config(sc); sc->sc_flags |= SC_OP_BEACONS; } void arn_bmiss_proc(void *arg) { struct arn_softc *sc = (struct arn_softc *)arg; ieee80211com_t *ic = (ieee80211com_t *)sc; uint64_t tsf, lastrx; uint_t bmisstimeout; if (ic->ic_opmode != IEEE80211_M_STA || ic->ic_state != IEEE80211_S_RUN) { return; } ARN_LOCK(sc); lastrx = sc->sc_lastrx; tsf = ath9k_hw_gettsf64(sc->sc_ah); bmisstimeout = ic->ic_bmissthreshold * ic->ic_bss->in_intval * 1024; ARN_DBG((ARN_DBG_BEACON, "arn_bmiss_proc():" " tsf %llu, lastrx %llu (%lld), bmiss %u\n", (unsigned long long)tsf, (unsigned long long)sc->sc_lastrx, (long long)(tsf - lastrx), bmisstimeout)); ARN_UNLOCK(sc); /* temp workaround */ if ((tsf - lastrx) > bmisstimeout) ieee80211_beacon_miss(ic); }