/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */ /* All Rights Reserved */ #ifndef _PARMS_H #define _PARMS_H /* If running SVR3, #define both ATTSVR3 and ATTSV */ #define ATTSVR3 /* System V Release 3 */ /* One of the following four lines should not be commented out. * The other three should be unless you are running a unique hybrid. */ #define ATTSV /* System III or System V */ /* #define V7 */ /* Version 7 systems (32V, Berkeley 4BSD, 4.1BSD) */ /* #define BSD4_2 */ /* Berkeley 4.2BSD */ /* #define V8 */ /* Research Eighth Edition */ /* Owner of setud files running on behalf of uucp. Needed in case * root runs uucp and euid is not honored by kernel. * GID is needed for some chown() calls. * Also used if guinfo() cannot find the current users ID in the * password file. */ #define UUCPUID (uid_t) 5 /* */ #define UUCPGID (gid_t) 5 /* */ /* define ATTSVKILL if your system has a kill(2) that accepts kill(0, pid) * as a test for killability. If ATTSV is defined this will automatically * be defined anyway. */ #define ATTSVKILL /* */ /* * the next two lines control high resolution sleeps, called naps. * * most UNIX versions have no nap() system call; they want NONAP defined, * in which case one is provided in the code. this includes all standard * versions of UNIX. * * some sites use a fast timer that reads a number of clock ticks and naps * for that interval; they want NONAP defined, and FASTTIMER defined as * the name of the device, e.g., /dev/ft. * * repeating, NONAP should be disabled *only* if your standard library has a * function called nap. */ #define NONAP /* nominal case -- no nap() in the standard library */ /* #define FASTTIMER "/dev/ft" */ /* identify the device used for naps */ /* * we use ustat to decide whether there's enough space to receive a * file. if you're not ATTSV, you can use a setgid program to read the * number of free blocks and free inodes directly off the disk. if you * choose this course, do not define NOUSTAT; rather, define V7USTAT to * be the name of that program. be sure it accepts 2 args, major and minor * device numbers, and returns two numbers, blocks and inodes, in * "%d %d" format, or you'll never receive another file. */ /* #define V7USTAT "/usr/local/lib/ustat" */ /* #define NOUSTAT */ /* define NOUSTAT if you don't have ustat */ /* define GRPCHK if you want to restrict the ability to read */ /* Systems file stuff by way of the DEBUG flags based on a group id range */ /* ex: if (GRPCHK(getgid()) no_secrets(); */ #define GRPMIN (gid_t) 2 /* */ #define GRPMAX (gid_t) 10 /* */ #define GRPCHK(gid) ( gid >= GRPMIN && gid <= GRPMAX ? 1 : 0 ) /* */ /* #define GRPCHK(gid) 1 */ /* Systems info is not protected from DEBUG */ /* definitions for the types of networks and dialers that are available */ /* used to depend on STANDALONE, but now done at runtime via Sysfiles */ #define DATAKIT /* define DATAKIT if datakit is available. */ /* #define UNET */ /* define UNET if you have 3com ethernet software */ /* #define TCP */ /* TCP (bsd systems) */ /* #define SYTEK*/ /* for sytek network */ #ifdef ATTSVR3 #define TLI /* for AT&T Transport Layer Interface networks */ #define TLIS /* for AT&T Transport Layer Interface networks */ /* with streams module "tirdwr" */ #endif /* ATTSVR3 */ #define DIAL801 /* 801/212-103 auto dialers */ /* define DUMB_DN if your dn driver (801 acu) cannot handle '=' */ /* #define DUMB_DN */ /* * Define protocols that are to be linked into uucico: * * The following table shows which protocols and networks work well * together. The g protocol works over noisy links. The e protocol * assumes that the underlying network provides an error free communications * channel that transfers the data in sequence without duplication. The * d protocols makes the same assumptions as the e protocol, but in addition * it does Datakit specific ioctl's. The g protocol is always included in * uucico. To include the other protocols, 1) insure that the symbol from * the Symbol column is defined in this file and 2) include the file from * the File comlumn in the definition of PROTOCOLS in uucp.mk. * * Prot. * Letter Symbol File Applicable Media * * g none - - * e E_PROTOCOL eio.c TCP, UNET, TLI, and DATAKIT. * d D_PROTOCOL dio.c DATAKIT * x X_PROTOCOL xio.c - * * The next six lines conditionally define the protocol symbols for d * and e protocols based on the networks that were chosen above. For the * x protocol you must explicitly define X_PROTOCOL. */ #ifdef DATAKIT /* Should include D protocol for Datakit. */ #define D_PROTOCOL #endif /* DATAKIT */ #if defined TCP || defined UNET || defined TLI || defined DATAKIT #define E_PROTOCOL /* Include e protocol. */ #endif /* TCP || UNET || TLI || DATAKIT */ /* #define X_PROTOCOL */ /* define X_PROTOCOL to use the xio protocol */ #define X_PROTOCOL /* aeh - to check compilation */ #define MAXCALLTRIES 2 /* maximum call attempts per Systems file line */ /* define DEFAULT_BAUDRATE to be the baud rate you want to use when both */ /* Systems file and Devices file allow Any */ #define DEFAULT_BAUDRATE "9600" /* */ /*define permission modes for the device */ #define M_DEVICEMODE (mode_t) 0600 /* manager device mode */ #define S_DEVICEMODE (mode_t) 0600 /* subsidiary device mode */ #define R_DEVICEMODE (mode_t) 0600 /* default mode to restore */ /* NO_MODEM_CTRL - define this if you have very old hardware * that does not know how to correctly handle modem control * Some old pdp/11 hardware such as dk, dl * If you define this, and have DH devices for direct lines, * the ports will often hang and be unusable. */ /*#define NO_MODEM_CTRL */ /* UUSTAT_TBL - this is the maximum number of machines that * status may be needed at any instant. * If you are not concerned with memory for a seldom used program, * make it very large. * This number is also used in uusched for its machine table -- it has * the same properties as the one in uustat. */ /* #define UUSTAT_TBL 1000 */ /* big machine with lots of traffic */ #define UUSTAT_TBL 200 /* define UNAME if uname() should be used to get uucpname * This will be defined automatically if ATTSV is defined */ #define UNAME /* */ /* initial wait time after failure before retry */ #define RETRYTIME 300 /* 5 minutes */ /* MAXRETRYTIME is for exponential backoff limit. * NOTE - this should not be 24 hours so that * retry is not always at the same time each day */ #define MAXRETRYTIME 82800 /* 23 hours */ #define ASSERT_RETRYTIME 86400 /* retry time for ASSERT errors */ /* This is the path that will be used for uuxqt command executions */ #define PATH "PATH=/usr/bin " /* */ /* This is the set of default commands that can be executed */ /* if non is given for the system name in PERMISSIONS file */ /* It is a colon separated list as in PERMISSIONS file */ #define DEFAULTCMDS "rmail" /* standard default command list */ /* define HZ to be the number of clock ticks per second */ /* #define HZ 60 */ /* not needed for ATTSV or above */ /* * put in local uucp name of this machine if there is no "/etc/whoami" * and no uname() (this is a last resort) */ #define MYNAME "kilroy" /* */ /* define NOSTRANGERS if you want to reject calls from systems which * are not in your Systems file. If defined, NOSTRANGERS should be the name * of the program to execute when such a system dials in. The argument * to said program will be the name of said system. Typically this is a shell * procedure that sends mail to the uucp administrator informing them of an * attempt to communicate by an unknown system. * NOTE - if this is defined, it can be overridden by the administrator * by making the command non-executable. (It can be turned on and off * by changing the mode of the command.) */ #define NOSTRANGERS "/usr/lib/uucp/remote.unknown" /* */ /* define LIMITS to be the name of a file which contains information * about the number of simultaneous uucicos,uuxqts, and uuscheds * that are allowed to run. If it is not defined, then there may be * "many" uucicos, uuxqts, and uuscheds running. */ #define LIMITS "/etc/uucp/Limits" /* */ /* define USRSPOOLLOCKS if you like your lock files in /var/spool/locks * be sure other programs such as 'cu' and 'ct' know about this * * WARNING: if you do not define USRSPOOLLOCKS, then $LOCK in * uudemon.cleanup must be changed. */ #define USRSPOOLLOCKS /* define to use /var/spool/locks for LCK files */ /* define PKSPEEDUP if you want to try the recommended speedup in pkcget. * this entails sleeping between reads at low baud rates. */ #define PKSPEEDUP /* */ #endif /* !_PARMS_H */