Lines Matching refs:as
40 obtain a kind of Net Boot ROM, such as a PXE ROM or a free software
47 Images::). These images are the same as the normal Stage 2, except that
51 such as Etherboot, use `nbgrub'. There is no difference between them
94 serial ports. In addition, a terminal emulator is also required, such as
117 serial terminal, but you can also pass `console' to the command, as
119 any key will be selected as a GRUB terminal.
138 critical to set up the serial terminal as soon as possible, since you
162 The file has the same semantics as normal configuration files (*note
229 In this case, GRUB will load `/boot/grub/menu-admin.lst' as a
234 permit only administrators to run some of your menu entries, such as an
290 These are called "Stage 1.5", because they serve as a bridge
299 While Stage 2 cannot generally be embedded in a fixed area as the
310 by some network boot loaders, such as Etherboot. This is mostly
311 the same as Stage 2, but it also sets up a network and loads a
358 BSD-SUBPART-LETTER represents the BSD disklabel subpartition, such as
390 for the directory separator (not `\' as in DOS). One example is
395 command `root' (*note root::), then `/boot/kernel' is the same as
416 `(hd0,1)+1' is the same as `+1' when the root device is `(hd0,1)'.
428 GRUB looks for its configuration file as soon as it is loaded. If one
504 to obtain a list of drives, one must open a parenthesis, as `root ('.
661 immediately start over using the NUM entry (same numbering as the
711 * device:: Specify a file as a drive
813 In the grub shell, specify the file FILE as the actual drive for a
910 PASSWD is entered, it loads the NEW-CONFIG-FILE as a new config
950 The serial port is not used as a communication channel unless the
1100 console as well. Hercules console is usable like the ordinary
1102 terminals: specify `hercules' as the argument.
1106 specify this option, the number is assumed as 24.
1205 * savedefault:: Save current entry as the default entry
1252 Load FILE as a chain-loader. Like any other file loaded by the
1257 defective boot loader, such as SCO UnixWare 7.1 (*note SCO
1286 Load FILE as a configuration file.
1408 command, short descriptions of rarely used commands (such as *Note
1409 testload::) are displayed as well.