Lines Matching refs:LF
2115 # you output the char in column 80, immediately output CR LF
2155 # can be configured to send either LF (\015) or CR LF). In Application Mode,
7394 # S1 10 CR/LF
7395 # U do CR/LF when CR received
7468 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
7669 # S4/W31: Enables automatic LF upon receipt of CR from
8038 # 10 X CR/LF (Auto LF)
9617 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
10125 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
10216 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
10619 # <is2> disables newline on LF,Emphasized off
10888 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
10936 # ESC [ 20 l LF on NL (not CRLF on NL)
11470 # require/do not require receipt of a DC1 from host after each LF*
11497 # new line is: 01=LF,10=CR,11=CRLF*
11502 # LF is newline/LF is down one line, same column*
11841 # Cursor down LF
13873 # hit after a CR is received, but before receiving a LF (or a
13883 # NOTE WELL that the rear panel switch should be set to CR/LF,
14127 # that the terminal would work somewhat if the auto LF/CR was turned off.
16358 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
16403 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
16838 # The modem interface is permitted to discard LF (maybe DC1), otherwise
18826 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
19068 # 3 = auto LF on CR (0 = no LF on CR)
19069 # 4 = auto CR on LF (0 = no CR on LF)
20638 # LF Line Feed ^J - - -
20827 # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
20828 # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
21086 # LF key_linefeed label_off
21146 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make