xref: /illumos-gate/usr/src/uts/sun4u/io/pci/pci_space.c (revision 825808cea61191744302c1ba1a71e8bd402f53db)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #pragma ident	"%Z%%M%	%I%	%E% SMI"
27 
28 /*
29  * PCI nexus driver tunables
30  */
31 
32 #include <sys/types.h>
33 #include <sys/cmn_err.h>
34 #include <sys/time.h>
35 #include <sys/thread.h>
36 #include <sys/ksynch.h>
37 #include <sys/pci.h>
38 #include <sys/pci/pci_space.h>
39 
40 
41 /*LINTLIBRARY*/
42 
43 /*
44  * Used to disallow bypass requests for tomatillos ver <= 2.3
45  * 0 allow bypass, 1 disallow it. errata #75
46  */
47 uint_t tomatillo_disallow_bypass = 0;
48 
49 /*
50  * The three variables below enable a workround for
51  * tomatillo's micro TLB bug. errata #82
52  */
53 uint_t tm_mtlb_maxpgs = 20;
54 uint_t tm_mtlb_gc = 0; /* for garbage collection */
55 uint_t tm_mtlb_gc_manual = 0; /* for manual tuning */
56 
57 /*
58  * By initializing pci_interrupt_priorities_property to 1, the priority
59  * level of the interrupt handler for a PCI device can be defined via an
60  * "interrupt-priorities" property.  This property is an array of integer
61  * values that have a one to one mapping the the "interrupts" property.
62  * For example, if a device's "interrupts" property was (1, 2) and its
63  * "interrupt-priorities" value was (5, 12), the handler for the first
64  * interrupt would run at cpu priority 5 and the second at priority 12.
65  * This would override the drivers standard mechanism for assigning
66  * priorities to interrupt handlers.
67  */
68 uint_t pci_interrupt_priorities_property = 1;
69 
70 /*
71  * By initializing pci_config_space_size_zero to 1, the driver will
72  * tolerate mapping requests for configuration space "reg" entries whose
73  * size is not zero.
74  */
75 uint_t pci_config_space_size_zero = 1;
76 
77 int pci_dvma_sync_before_unmap = 0;
78 int pci_sync_lock = 0;
79 
80 int tomatillo_store_store_wrka = 0;
81 uint32_t pci_spurintr_duration = 60000000; /* One minute */
82 uint64_t pci_spurintr_msgs = PCI_SPURINTR_MSG_DEFAULT;
83 
84 /*
85  * The variable controls the default setting of the command register
86  * for pci devices.  See init_child() for details.
87  *
88  * This flags also controls the setting of bits in the bridge control
89  * register pci to pci bridges.  See init_child() for details.
90  */
91 ushort_t pci_command_default = PCI_COMM_SERR_ENABLE |
92 				PCI_COMM_WAIT_CYC_ENAB |
93 				PCI_COMM_PARITY_DETECT |
94 				PCI_COMM_ME |
95 				PCI_COMM_MAE |
96 				PCI_COMM_IO;
97 /*
98  * The following variable enables a workaround for the following obp bug:
99  *
100  *	1234181 - obp should set latency timer registers in pci
101  *		configuration header
102  *
103  * Until this bug gets fixed in the obp, the following workaround should
104  * be enabled.
105  */
106 uint_t pci_set_latency_timer_register = 1;
107 
108 /*
109  * The following variable enables a workaround for an obp bug to be
110  * submitted.  A bug requesting a workaround fof this problem has
111  * been filed:
112  *
113  *	1235094 - need workarounds on positron nexus drivers to set cache
114  *		line size registers
115  *
116  * Until this bug gets fixed in the obp, the following workaround should
117  * be enabled.
118  */
119 uint_t pci_set_cache_line_size_register = 1;
120 
121 /*
122  * The following driver parameters are defined as variables to allow
123  * patching for debugging and tuning.  Flags that can be set on a per
124  * PBM basis are bit fields where the PBM device instance number maps
125  * to the bit position.
126  */
127 #ifdef DEBUG
128 uint64_t pci_debug_flags = 0;
129 uint_t pci_warn_pp0 = 0;
130 #endif
131 uint_t pci_disable_pass1_workarounds = 0;
132 uint_t pci_disable_pass2_workarounds = 0;
133 uint_t pci_disable_pass3_workarounds = 0;
134 uint_t pci_disable_plus_workarounds = 0;
135 uint_t pci_disable_default_workarounds = 0;
136 uint_t ecc_error_intr_enable = 1;
137 uint_t pci_sbh_error_intr_enable = (uint_t)-1;
138 uint_t pci_mmu_error_intr_enable = (uint_t)-1;
139 uint_t pci_stream_buf_enable = (uint_t)-1;
140 uint_t pci_stream_buf_exists = 1;
141 uint_t pci_rerun_disable = 0;
142 
143 uint_t pci_enable_retry_arb = (uint_t)-1;
144 
145 uint_t pci_bus_parking_enable = (uint_t)-1;
146 uint_t pci_error_intr_enable = (uint_t)-1;
147 uint_t pci_retry_disable = 0;
148 uint_t pci_retry_enable = 0;
149 uint_t pci_dwsync_disable = 0;
150 uint_t pci_intsync_disable = 0;
151 uint_t pci_b_arb_enable = 0xf;
152 uint_t pci_a_arb_enable = 0xf;
153 uint_t pci_ecc_afsr_retries = 100;	/* XXX - what's a good value? */
154 
155 uint_t pci_intr_retry_intv = 5;		/* for interrupt retry reg */
156 uint8_t pci_latency_timer = 0x40;	/* for pci latency timer reg */
157 uint_t pci_panic_on_sbh_errors = 0;
158 uint_t pci_panic_on_fatal_errors = 1;	/* should be 1 at beta */
159 uint_t pci_thermal_intr_fatal = 1;	/* thermal interrupts fatal */
160 uint_t pci_buserr_interrupt = 1;	/* safari buserr interrupt */
161 uint_t pci_set_dto_value = 0;		/* overwrite the prom settings? */
162 uint_t pci_dto_value = 1;		/* schizo consistent buf timeout PTO */
163 uint_t pci_lock_sbuf = 0;
164 
165 uint_t pci_use_contexts = 1;
166 uint_t pci_sc_use_contexts = 1;
167 uint_t pci_context_minpages = 2;
168 uint_t pci_ctx_flush_warn = CE_IGNORE;
169 uint_t pci_ctx_unsuccess_count = 0;	/* unsuccessful ctx flush count */
170 uint_t pci_ctx_no_active_flush = 0;	/* cannot handle active ctx flush */
171 uint_t pci_ctx_no_compat = 0;		/* maintain compatibility */
172 
173 uint64_t pci_perr_enable = -1ull;
174 uint64_t pci_serr_enable = -1ull;
175 uint64_t pci_perr_fatal = -1ull;
176 uint64_t pci_serr_fatal = -1ull;
177 hrtime_t pci_intrpend_timeout = 5ll * NANOSEC;	/* 5 seconds in nanoseconds */
178 hrtime_t pci_sync_buf_timeout = 1ll * NANOSEC;	/* 1 second  in nanoseconds */
179 hrtime_t pci_cdma_intr_timeout = 1ll * NANOSEC; /* consistent sync trigger */
180 uint32_t pci_cdma_intr_count = 15; /* num of pci_cdma_intr_timeout cycles */
181 
182 uint32_t pci_dto_fault_warn = CE_WARN; /* set to CE_IGNORE for no messages */
183 uint64_t pci_dto_intr_enable = 0;
184 uint64_t pci_dto_count = 0;
185 uint64_t pci_errtrig_pa = 0x0;
186 
187 /*
188  * The following flag controls behavior of the ino handler routine
189  * when multiple interrupts are attached to a single ino.  Typically
190  * this case would occur for the ino's assigned to the PCI bus slots
191  * with multi-function devices or bus bridges.
192  *
193  * Setting the flag to zero causes the ino handler routine to return
194  * after finding the first interrupt handler to claim the interrupt.
195  *
196  * Setting the flag to non-zero causes the ino handler routine to
197  * return after making one complete pass through the interrupt
198  * handlers.
199  */
200 uint_t pci_check_all_handlers = 1;
201 
202 /*
203  * The following value is the number of consecutive unclaimed interrupts that
204  * will be tolerated for a particular ino_p before the interrupt is deemed to
205  * be jabbering and is blocked.
206  */
207 uint_t pci_unclaimed_intr_max = 20;
208 
209 ulong_t pci_iommu_dvma_end = 0xfffffffful;
210 uint_t pci_lock_tlb = 0;
211 uint64_t pci_dvma_debug_on = 0;
212 uint64_t pci_dvma_debug_off = 0;
213 uint32_t pci_dvma_debug_rec = 512;
214 
215 /*
216  * dvma address space allocation cache variables
217  */
218 uint_t pci_dvma_page_cache_entries = 0x200;	/* # of chunks (1 << bits) */
219 uint_t pci_dvma_page_cache_clustsz = 0x8;	/* # of pages per chunk */
220 #ifdef PCI_DMA_PROF
221 uint_t pci_dvmaft_npages = 0;			/* FT fail due npages */
222 uint_t pci_dvmaft_limit = 0;			/* FT fail due limits */
223 uint_t pci_dvmaft_free = 0;			/* FT free */
224 uint_t pci_dvmaft_success = 0;			/* FT success */
225 uint_t pci_dvmaft_exhaust = 0;			/* FT vmem fallback */
226 uint_t pci_dvma_vmem_alloc = 0;			/* vmem alloc */
227 uint_t pci_dvma_vmem_xalloc = 0;		/* vmem xalloc */
228 uint_t pci_dvma_vmem_xfree = 0;			/* vmem xfree */
229 uint_t pci_dvma_vmem_free = 0;			/* vmem free */
230 #endif
231 uint_t pci_disable_fdvma = 0;
232 
233 uint_t pci_iommu_ctx_lock_failure = 0;
234 
235 /*
236  * This flag preserves prom iommu settings by copying prom TSB entries
237  * to corresponding kernel TSB entry locations. It should be removed
238  * after the interface properties from obp have become default.
239  */
240 uint_t pci_preserve_iommu_tsb = 1;
241 
242 /*
243  * memory callback list id callback list for kmem_alloc failure clients
244  */
245 uintptr_t pci_kmem_clid = 0;
246 
247 /*
248  * Perform a consistent-mode sync/flush during interrupt.
249  */
250 uint_t pci_intr_dma_sync = 0;
251 
252 /*
253  * This flag is used to enable max prefetch streaming cache mode
254  * feature of XMITS.
255  */
256 uint_t pci_xmits_sc_max_prf = 0;
257 
258 /*
259  * This flag is used to enable pcix error reporting in XMITS.
260  */
261 uint64_t xmits_error_intr_enable = -1ull;
262 
263 /*
264  * Enable parity error recovery for xmits
265  */
266 uint_t xmits_perr_recov_int_enable = 0;
267 
268 /*
269  * This flag controls whether or not DVMA remap support is
270  * enabled (currently, Schizo/XMITS only).
271  */
272 int pci_dvma_remap_enabled = 0;
273 
274 /*
275  * Serialize PCI relocations, since they are time critical.
276  */
277 kthread_t *pci_reloc_thread = NULL;
278 kmutex_t pci_reloc_mutex;
279 kcondvar_t pci_reloc_cv;
280 int pci_reloc_presuspend = 0;
281 int pci_reloc_suspend = 0;
282 id_t pci_dvma_cbid;
283 id_t pci_fast_dvma_cbid;
284 int pci_dma_panic_on_leak = 0;
285 
286 /*
287  * Set Outstanding Maximum Split Transactions.  Legal settings are:
288  * 0 = 1 Outstanding Transacation, 1 = 2, 2 = 3, 3 = 4, 4 = 8, 5 = 12,
289  * 6 = 16, 7 = 32.
290  */
291 uint_t xmits_max_transactions = 0;
292 
293 /*
294  * Set Max Memory Read Byte Count. Legal settings are:
295  * 0 = 512 Max Memory Read Bytes, 1 = 1024, 2 = 2048, 3 = 4096.
296  */
297 uint_t xmits_max_read_bytes = 0;
298 
299 /*
300  * Bits 15:0 increase the maximum PIO retries allowed by XMITS.
301  */
302 uint_t xmits_upper_retry_counter = 0x3E8;
303 
304 /*
305  * default values for xmits pcix diag BUG_FIX_CNTL bits 47:32
306  * depending on mode: pcix or pci.
307  */
308 uint_t xmits_pcix_diag_bugcntl_pcix = 0xA0;
309 uint_t xmits_pcix_diag_bugcntl_pci =  0xFF;
310