xref: /illumos-gate/usr/src/uts/common/fs/zfs/sys/metaslab_impl.h (revision 4d7988d6050abba5c1ff60e7fd196e95c22e20f4)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 /*
27  * Copyright (c) 2011, 2019 by Delphix. All rights reserved.
28  */
29 
30 #ifndef _SYS_METASLAB_IMPL_H
31 #define	_SYS_METASLAB_IMPL_H
32 
33 #include <sys/metaslab.h>
34 #include <sys/space_map.h>
35 #include <sys/range_tree.h>
36 #include <sys/vdev.h>
37 #include <sys/txg.h>
38 #include <sys/avl.h>
39 #include <sys/multilist.h>
40 
41 #ifdef	__cplusplus
42 extern "C" {
43 #endif
44 
45 /*
46  * Metaslab allocation tracing record.
47  */
48 typedef struct metaslab_alloc_trace {
49 	list_node_t			mat_list_node;
50 	metaslab_group_t		*mat_mg;
51 	metaslab_t			*mat_msp;
52 	uint64_t			mat_size;
53 	uint64_t			mat_weight;
54 	uint32_t			mat_dva_id;
55 	uint64_t			mat_offset;
56 	int					mat_allocator;
57 } metaslab_alloc_trace_t;
58 
59 /*
60  * Used by the metaslab allocation tracing facility to indicate
61  * error conditions. These errors are stored to the offset member
62  * of the metaslab_alloc_trace_t record and displayed by mdb.
63  */
64 typedef enum trace_alloc_type {
65 	TRACE_ALLOC_FAILURE	= -1ULL,
66 	TRACE_TOO_SMALL		= -2ULL,
67 	TRACE_FORCE_GANG	= -3ULL,
68 	TRACE_NOT_ALLOCATABLE	= -4ULL,
69 	TRACE_GROUP_FAILURE	= -5ULL,
70 	TRACE_ENOSPC		= -6ULL,
71 	TRACE_CONDENSING	= -7ULL,
72 	TRACE_VDEV_ERROR	= -8ULL,
73 	TRACE_DISABLED		= -9ULL,
74 } trace_alloc_type_t;
75 
76 #define	METASLAB_WEIGHT_PRIMARY		(1ULL << 63)
77 #define	METASLAB_WEIGHT_SECONDARY	(1ULL << 62)
78 #define	METASLAB_WEIGHT_CLAIM		(1ULL << 61)
79 #define	METASLAB_WEIGHT_TYPE		(1ULL << 60)
80 #define	METASLAB_ACTIVE_MASK		\
81 	(METASLAB_WEIGHT_PRIMARY | METASLAB_WEIGHT_SECONDARY | \
82 	METASLAB_WEIGHT_CLAIM)
83 
84 /*
85  * The metaslab weight is used to encode the amount of free space in a
86  * metaslab, such that the "best" metaslab appears first when sorting the
87  * metaslabs by weight. The weight (and therefore the "best" metaslab) can
88  * be determined in two different ways: by computing a weighted sum of all
89  * the free space in the metaslab (a space based weight) or by counting only
90  * the free segments of the largest size (a segment based weight). We prefer
91  * the segment based weight because it reflects how the free space is
92  * comprised, but we cannot always use it -- legacy pools do not have the
93  * space map histogram information necessary to determine the largest
94  * contiguous regions. Pools that have the space map histogram determine
95  * the segment weight by looking at each bucket in the histogram and
96  * determining the free space whose size in bytes is in the range:
97  *	[2^i, 2^(i+1))
98  * We then encode the largest index, i, that contains regions into the
99  * segment-weighted value.
100  *
101  * Space-based weight:
102  *
103  *      64      56      48      40      32      24      16      8       0
104  *      +-------+-------+-------+-------+-------+-------+-------+-------+
105  *      |PSC1|                  weighted-free space                     |
106  *      +-------+-------+-------+-------+-------+-------+-------+-------+
107  *
108  *	PS - indicates primary and secondary activation
109  *	C - indicates activation for claimed block zio
110  *	space - the fragmentation-weighted space
111  *
112  * Segment-based weight:
113  *
114  *      64      56      48      40      32      24      16      8       0
115  *      +-------+-------+-------+-------+-------+-------+-------+-------+
116  *      |PSC0| idx|            count of segments in region              |
117  *      +-------+-------+-------+-------+-------+-------+-------+-------+
118  *
119  *	PS - indicates primary and secondary activation
120  *	C - indicates activation for claimed block zio
121  *	idx - index for the highest bucket in the histogram
122  *	count - number of segments in the specified bucket
123  */
124 #define	WEIGHT_GET_ACTIVE(weight)		BF64_GET((weight), 61, 3)
125 #define	WEIGHT_SET_ACTIVE(weight, x)		BF64_SET((weight), 61, 3, x)
126 
127 #define	WEIGHT_IS_SPACEBASED(weight)		\
128 	((weight) == 0 || BF64_GET((weight), 60, 1))
129 #define	WEIGHT_SET_SPACEBASED(weight)		BF64_SET((weight), 60, 1, 1)
130 
131 /*
132  * These macros are only applicable to segment-based weighting.
133  */
134 #define	WEIGHT_GET_INDEX(weight)		BF64_GET((weight), 54, 6)
135 #define	WEIGHT_SET_INDEX(weight, x)		BF64_SET((weight), 54, 6, x)
136 #define	WEIGHT_GET_COUNT(weight)		BF64_GET((weight), 0, 54)
137 #define	WEIGHT_SET_COUNT(weight, x)		BF64_SET((weight), 0, 54, x)
138 
139 /*
140  * A metaslab class encompasses a category of allocatable top-level vdevs.
141  * Each top-level vdev is associated with a metaslab group which defines
142  * the allocatable region for that vdev. Examples of these categories include
143  * "normal" for data block allocations (i.e. main pool allocations) or "log"
144  * for allocations designated for intent log devices (i.e. slog devices).
145  * When a block allocation is requested from the SPA it is associated with a
146  * metaslab_class_t, and only top-level vdevs (i.e. metaslab groups) belonging
147  * to the class can be used to satisfy that request. Allocations are done
148  * by traversing the metaslab groups that are linked off of the mc_rotor field.
149  * This rotor points to the next metaslab group where allocations will be
150  * attempted. Allocating a block is a 3 step process -- select the metaslab
151  * group, select the metaslab, and then allocate the block. The metaslab
152  * class defines the low-level block allocator that will be used as the
153  * final step in allocation. These allocators are pluggable allowing each class
154  * to use a block allocator that best suits that class.
155  */
156 struct metaslab_class {
157 	kmutex_t		mc_lock;
158 	spa_t			*mc_spa;
159 	metaslab_group_t	*mc_rotor;
160 	metaslab_ops_t		*mc_ops;
161 	uint64_t		mc_aliquot;
162 
163 	/*
164 	 * Track the number of metaslab groups that have been initialized
165 	 * and can accept allocations. An initialized metaslab group is
166 	 * one has been completely added to the config (i.e. we have
167 	 * updated the MOS config and the space has been added to the pool).
168 	 */
169 	uint64_t		mc_groups;
170 
171 	/*
172 	 * Toggle to enable/disable the allocation throttle.
173 	 */
174 	boolean_t		mc_alloc_throttle_enabled;
175 
176 	/*
177 	 * The allocation throttle works on a reservation system. Whenever
178 	 * an asynchronous zio wants to perform an allocation it must
179 	 * first reserve the number of blocks that it wants to allocate.
180 	 * If there aren't sufficient slots available for the pending zio
181 	 * then that I/O is throttled until more slots free up. The current
182 	 * number of reserved allocations is maintained by the mc_alloc_slots
183 	 * refcount. The mc_alloc_max_slots value determines the maximum
184 	 * number of allocations that the system allows. Gang blocks are
185 	 * allowed to reserve slots even if we've reached the maximum
186 	 * number of allocations allowed.
187 	 */
188 	uint64_t		*mc_alloc_max_slots;
189 	zfs_refcount_t		*mc_alloc_slots;
190 
191 	uint64_t		mc_alloc_groups; /* # of allocatable groups */
192 
193 	uint64_t		mc_alloc;	/* total allocated space */
194 	uint64_t		mc_deferred;	/* total deferred frees */
195 	uint64_t		mc_space;	/* total space (alloc + free) */
196 	uint64_t		mc_dspace;	/* total deflated space */
197 	uint64_t		mc_histogram[RANGE_TREE_HISTOGRAM_SIZE];
198 
199 	/*
200 	 * List of all loaded metaslabs in the class, sorted in order of most
201 	 * recent use.
202 	 */
203 	multilist_t		*mc_metaslab_txg_list;
204 };
205 
206 /*
207  * Metaslab groups encapsulate all the allocatable regions (i.e. metaslabs)
208  * of a top-level vdev. They are linked togther to form a circular linked
209  * list and can belong to only one metaslab class. Metaslab groups may become
210  * ineligible for allocations for a number of reasons such as limited free
211  * space, fragmentation, or going offline. When this happens the allocator will
212  * simply find the next metaslab group in the linked list and attempt
213  * to allocate from that group instead.
214  */
215 struct metaslab_group {
216 	kmutex_t		mg_lock;
217 	metaslab_t		**mg_primaries;
218 	metaslab_t		**mg_secondaries;
219 	avl_tree_t		mg_metaslab_tree;
220 	uint64_t		mg_aliquot;
221 	boolean_t		mg_allocatable;		/* can we allocate? */
222 	uint64_t		mg_ms_ready;
223 
224 	/*
225 	 * A metaslab group is considered to be initialized only after
226 	 * we have updated the MOS config and added the space to the pool.
227 	 * We only allow allocation attempts to a metaslab group if it
228 	 * has been initialized.
229 	 */
230 	boolean_t		mg_initialized;
231 
232 	uint64_t		mg_free_capacity;	/* percentage free */
233 	int64_t			mg_bias;
234 	int64_t			mg_activation_count;
235 	metaslab_class_t	*mg_class;
236 	vdev_t			*mg_vd;
237 	taskq_t			*mg_taskq;
238 	metaslab_group_t	*mg_prev;
239 	metaslab_group_t	*mg_next;
240 
241 	/*
242 	 * In order for the allocation throttle to function properly, we cannot
243 	 * have too many IOs going to each disk by default; the throttle
244 	 * operates by allocating more work to disks that finish quickly, so
245 	 * allocating larger chunks to each disk reduces its effectiveness.
246 	 * However, if the number of IOs going to each allocator is too small,
247 	 * we will not perform proper aggregation at the vdev_queue layer,
248 	 * also resulting in decreased performance. Therefore, we will use a
249 	 * ramp-up strategy.
250 	 *
251 	 * Each allocator in each metaslab group has a current queue depth
252 	 * (mg_alloc_queue_depth[allocator]) and a current max queue depth
253 	 * (mg_cur_max_alloc_queue_depth[allocator]), and each metaslab group
254 	 * has an absolute max queue depth (mg_max_alloc_queue_depth).  We
255 	 * add IOs to an allocator until the mg_alloc_queue_depth for that
256 	 * allocator hits the cur_max. Every time an IO completes for a given
257 	 * allocator on a given metaslab group, we increment its cur_max until
258 	 * it reaches mg_max_alloc_queue_depth. The cur_max resets every txg to
259 	 * help protect against disks that decrease in performance over time.
260 	 *
261 	 * It's possible for an allocator to handle more allocations than
262 	 * its max. This can occur when gang blocks are required or when other
263 	 * groups are unable to handle their share of allocations.
264 	 */
265 	uint64_t		mg_max_alloc_queue_depth;
266 	uint64_t		*mg_cur_max_alloc_queue_depth;
267 	zfs_refcount_t		*mg_alloc_queue_depth;
268 	int			mg_allocators;
269 	/*
270 	 * A metalab group that can no longer allocate the minimum block
271 	 * size will set mg_no_free_space. Once a metaslab group is out
272 	 * of space then its share of work must be distributed to other
273 	 * groups.
274 	 */
275 	boolean_t		mg_no_free_space;
276 
277 	uint64_t		mg_allocations;
278 	uint64_t		mg_failed_allocations;
279 	uint64_t		mg_fragmentation;
280 	uint64_t		mg_histogram[RANGE_TREE_HISTOGRAM_SIZE];
281 
282 	int			mg_ms_disabled;
283 	boolean_t		mg_disabled_updating;
284 	kmutex_t		mg_ms_disabled_lock;
285 	kcondvar_t		mg_ms_disabled_cv;
286 };
287 
288 /*
289  * This value defines the number of elements in the ms_lbas array. The value
290  * of 64 was chosen as it covers all power of 2 buckets up to UINT64_MAX.
291  * This is the equivalent of highbit(UINT64_MAX).
292  */
293 #define	MAX_LBAS	64
294 
295 /*
296  * Each metaslab maintains a set of in-core trees to track metaslab
297  * operations.  The in-core free tree (ms_allocatable) contains the list of
298  * free segments which are eligible for allocation.  As blocks are
299  * allocated, the allocated segment are removed from the ms_allocatable and
300  * added to a per txg allocation tree (ms_allocating).  As blocks are
301  * freed, they are added to the free tree (ms_freeing).  These trees
302  * allow us to process all allocations and frees in syncing context
303  * where it is safe to update the on-disk space maps.  An additional set
304  * of in-core trees is maintained to track deferred frees
305  * (ms_defer).  Once a block is freed it will move from the
306  * ms_freed to the ms_defer tree.  A deferred free means that a block
307  * has been freed but cannot be used by the pool until TXG_DEFER_SIZE
308  * transactions groups later.  For example, a block that is freed in txg
309  * 50 will not be available for reallocation until txg 52 (50 +
310  * TXG_DEFER_SIZE).  This provides a safety net for uberblock rollback.
311  * A pool could be safely rolled back TXG_DEFERS_SIZE transactions
312  * groups and ensure that no block has been reallocated.
313  *
314  * The simplified transition diagram looks like this:
315  *
316  *
317  *      ALLOCATE
318  *         |
319  *         V
320  *    free segment (ms_allocatable) -> ms_allocating[4] -> (write to space map)
321  *         ^
322  *         |                        ms_freeing <--- FREE
323  *         |                             |
324  *         |                             v
325  *         |                         ms_freed
326  *         |                             |
327  *         +-------- ms_defer[2] <-------+-------> (write to space map)
328  *
329  *
330  * Each metaslab's space is tracked in a single space map in the MOS,
331  * which is only updated in syncing context.  Each time we sync a txg,
332  * we append the allocs and frees from that txg to the space map.  The
333  * pool space is only updated once all metaslabs have finished syncing.
334  *
335  * To load the in-core free tree we read the space map from disk.  This
336  * object contains a series of alloc and free records that are combined
337  * to make up the list of all free segments in this metaslab.  These
338  * segments are represented in-core by the ms_allocatable and are stored
339  * in an AVL tree.
340  *
341  * As the space map grows (as a result of the appends) it will
342  * eventually become space-inefficient.  When the metaslab's in-core
343  * free tree is zfs_condense_pct/100 times the size of the minimal
344  * on-disk representation, we rewrite it in its minimized form.  If a
345  * metaslab needs to condense then we must set the ms_condensing flag to
346  * ensure that allocations are not performed on the metaslab that is
347  * being written.
348  */
349 struct metaslab {
350 	/*
351 	 * This is the main lock of the metaslab and its purpose is to
352 	 * coordinate our allocations and frees [e.g metaslab_block_alloc(),
353 	 * metaslab_free_concrete(), ..etc] with our various syncing
354 	 * procedures [e.g. metaslab_sync(), metaslab_sync_done(), ..etc].
355 	 *
356 	 * The lock is also used during some miscellaneous operations like
357 	 * using the metaslab's histogram for the metaslab group's histogram
358 	 * aggregation, or marking the metaslab for initialization.
359 	 */
360 	kmutex_t	ms_lock;
361 
362 	/*
363 	 * Acquired together with the ms_lock whenever we expect to
364 	 * write to metaslab data on-disk (i.e flushing entries to
365 	 * the metaslab's space map). It helps coordinate readers of
366 	 * the metaslab's space map [see spa_vdev_remove_thread()]
367 	 * with writers [see metaslab_sync() or metaslab_flush()].
368 	 *
369 	 * Note that metaslab_load(), even though a reader, uses
370 	 * a completely different mechanism to deal with the reading
371 	 * of the metaslab's space map based on ms_synced_length. That
372 	 * said, the function still uses the ms_sync_lock after it
373 	 * has read the ms_sm [see relevant comment in metaslab_load()
374 	 * as to why].
375 	 */
376 	kmutex_t	ms_sync_lock;
377 
378 	kcondvar_t	ms_load_cv;
379 	space_map_t	*ms_sm;
380 	uint64_t	ms_id;
381 	uint64_t	ms_start;
382 	uint64_t	ms_size;
383 	uint64_t	ms_fragmentation;
384 
385 	range_tree_t	*ms_allocating[TXG_SIZE];
386 	range_tree_t	*ms_allocatable;
387 	uint64_t	ms_allocated_this_txg;
388 	uint64_t	ms_allocating_total;
389 
390 	/*
391 	 * The following range trees are accessed only from syncing context.
392 	 * ms_free*tree only have entries while syncing, and are empty
393 	 * between syncs.
394 	 */
395 	range_tree_t	*ms_freeing;	/* to free this syncing txg */
396 	range_tree_t	*ms_freed;	/* already freed this syncing txg */
397 	range_tree_t	*ms_defer[TXG_DEFER_SIZE];
398 	range_tree_t	*ms_checkpointing; /* to add to the checkpoint */
399 
400 	/*
401 	 * The ms_trim tree is the set of allocatable segments which are
402 	 * eligible for trimming. (When the metaslab is loaded, it's a
403 	 * subset of ms_allocatable.)  It's kept in-core as long as the
404 	 * autotrim property is set and is not vacated when the metaslab
405 	 * is unloaded.  Its purpose is to aggregate freed ranges to
406 	 * facilitate efficient trimming.
407 	 */
408 	range_tree_t	*ms_trim;
409 
410 	boolean_t	ms_condensing;	/* condensing? */
411 	boolean_t	ms_condense_wanted;
412 
413 	/*
414 	 * The number of consumers which have disabled the metaslab.
415 	 */
416 	uint64_t	ms_disabled;
417 
418 	/*
419 	 * We must always hold the ms_lock when modifying ms_loaded
420 	 * and ms_loading.
421 	 */
422 	boolean_t	ms_loaded;
423 	boolean_t	ms_loading;
424 	kcondvar_t	ms_flush_cv;
425 	boolean_t	ms_flushing;
426 
427 	/*
428 	 * The following histograms count entries that are in the
429 	 * metaslab's space map (and its histogram) but are not in
430 	 * ms_allocatable yet, because they are in ms_freed, ms_freeing,
431 	 * or ms_defer[].
432 	 *
433 	 * When the metaslab is not loaded, its ms_weight needs to
434 	 * reflect what is allocatable (i.e. what will be part of
435 	 * ms_allocatable if it is loaded).  The weight is computed from
436 	 * the spacemap histogram, but that includes ranges that are
437 	 * not yet allocatable (because they are in ms_freed,
438 	 * ms_freeing, or ms_defer[]).  Therefore, when calculating the
439 	 * weight, we need to remove those ranges.
440 	 *
441 	 * The ranges in the ms_freed and ms_defer[] range trees are all
442 	 * present in the spacemap.  However, the spacemap may have
443 	 * multiple entries to represent a contiguous range, because it
444 	 * is written across multiple sync passes, but the changes of
445 	 * all sync passes are consolidated into the range trees.
446 	 * Adjacent ranges that are freed in different sync passes of
447 	 * one txg will be represented separately (as 2 or more entries)
448 	 * in the space map (and its histogram), but these adjacent
449 	 * ranges will be consolidated (represented as one entry) in the
450 	 * ms_freed/ms_defer[] range trees (and their histograms).
451 	 *
452 	 * When calculating the weight, we can not simply subtract the
453 	 * range trees' histograms from the spacemap's histogram,
454 	 * because the range trees' histograms may have entries in
455 	 * higher buckets than the spacemap, due to consolidation.
456 	 * Instead we must subtract the exact entries that were added to
457 	 * the spacemap's histogram.  ms_synchist and ms_deferhist[]
458 	 * represent these exact entries, so we can subtract them from
459 	 * the spacemap's histogram when calculating ms_weight.
460 	 *
461 	 * ms_synchist represents the same ranges as ms_freeing +
462 	 * ms_freed, but without consolidation across sync passes.
463 	 *
464 	 * ms_deferhist[i] represents the same ranges as ms_defer[i],
465 	 * but without consolidation across sync passes.
466 	 */
467 	uint64_t	ms_synchist[SPACE_MAP_HISTOGRAM_SIZE];
468 	uint64_t	ms_deferhist[TXG_DEFER_SIZE][SPACE_MAP_HISTOGRAM_SIZE];
469 
470 	/*
471 	 * Tracks the exact amount of allocated space of this metaslab
472 	 * (and specifically the metaslab's space map) up to the most
473 	 * recently completed sync pass [see usage in metaslab_sync()].
474 	 */
475 	uint64_t	ms_allocated_space;
476 	int64_t		ms_deferspace;	/* sum of ms_defermap[] space	*/
477 	uint64_t	ms_weight;	/* weight vs. others in group	*/
478 	uint64_t	ms_activation_weight;	/* activation weight	*/
479 
480 	/*
481 	 * Track of whenever a metaslab is selected for loading or allocation.
482 	 * We use this value to determine how long the metaslab should
483 	 * stay cached.
484 	 */
485 	uint64_t	ms_selected_txg;
486 	/*
487 	 * ms_load/unload_time can be used for performance monitoring
488 	 * (e.g. by dtrace or mdb).
489 	 */
490 	hrtime_t	ms_load_time;	/* time last loaded */
491 	hrtime_t	ms_unload_time;	/* time last unloaded */
492 	hrtime_t	ms_selected_time; /* time last allocated from */
493 
494 	uint64_t	ms_alloc_txg;	/* last successful alloc (debug only) */
495 	uint64_t	ms_max_size;	/* maximum allocatable size	*/
496 
497 	/*
498 	 * -1 if it's not active in an allocator, otherwise set to the allocator
499 	 * this metaslab is active for.
500 	 */
501 	int		ms_allocator;
502 	boolean_t	ms_primary; /* Only valid if ms_allocator is not -1 */
503 
504 	/*
505 	 * The metaslab block allocators can optionally use a size-ordered
506 	 * range tree and/or an array of LBAs. Not all allocators use
507 	 * this functionality. The ms_allocatable_by_size should always
508 	 * contain the same number of segments as the ms_allocatable. The
509 	 * only difference is that the ms_allocatable_by_size is ordered by
510 	 * segment sizes.
511 	 */
512 	zfs_btree_t		ms_allocatable_by_size;
513 	zfs_btree_t		ms_unflushed_frees_by_size;
514 	uint64_t	ms_lbas[MAX_LBAS];
515 
516 	metaslab_group_t *ms_group;	/* metaslab group		*/
517 	avl_node_t	ms_group_node;	/* node in metaslab group tree	*/
518 	txg_node_t	ms_txg_node;	/* per-txg dirty metaslab links	*/
519 	avl_node_t	ms_spa_txg_node; /* node in spa_metaslabs_by_txg */
520 	/*
521 	 * Node in metaslab class's selected txg list
522 	 */
523 	multilist_node_t	ms_class_txg_node;
524 
525 	/*
526 	 * Allocs and frees that are committed to the vdev log spacemap but
527 	 * not yet to this metaslab's spacemap.
528 	 */
529 	range_tree_t	*ms_unflushed_allocs;
530 	range_tree_t	*ms_unflushed_frees;
531 
532 	/*
533 	 * We have flushed entries up to but not including this TXG. In
534 	 * other words, all changes from this TXG and onward should not
535 	 * be in this metaslab's space map and must be read from the
536 	 * log space maps.
537 	 */
538 	uint64_t	ms_unflushed_txg;
539 
540 	/* updated every time we are done syncing the metaslab's space map */
541 	uint64_t	ms_synced_length;
542 
543 	boolean_t	ms_new;
544 };
545 
546 typedef struct metaslab_unflushed_phys {
547 	/* on-disk counterpart of ms_unflushed_txg */
548 	uint64_t	msp_unflushed_txg;
549 } metaslab_unflushed_phys_t;
550 
551 #ifdef	__cplusplus
552 }
553 #endif
554 
555 #endif	/* _SYS_METASLAB_IMPL_H */
556