1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2006 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SYS_DMU_H 27 #define _SYS_DMU_H 28 29 #pragma ident "%Z%%M% %I% %E% SMI" 30 31 /* 32 * This file describes the interface that the DMU provides for its 33 * consumers. 34 * 35 * The DMU also interacts with the SPA. That interface is described in 36 * dmu_spa.h. 37 */ 38 39 #include <sys/inttypes.h> 40 #include <sys/types.h> 41 #include <sys/param.h> 42 43 #ifdef __cplusplus 44 extern "C" { 45 #endif 46 47 struct uio; 48 struct vnode; 49 struct spa; 50 struct zilog; 51 struct zio; 52 struct blkptr; 53 struct zap_cursor; 54 struct dsl_dataset; 55 struct dsl_pool; 56 struct dnode; 57 struct drr_begin; 58 struct drr_end; 59 struct zbookmark; 60 struct spa; 61 62 typedef struct objset objset_t; 63 typedef struct dmu_tx dmu_tx_t; 64 typedef struct dsl_dir dsl_dir_t; 65 66 typedef enum dmu_object_type { 67 DMU_OT_NONE, 68 /* general: */ 69 DMU_OT_OBJECT_DIRECTORY, /* ZAP */ 70 DMU_OT_OBJECT_ARRAY, /* UINT64 */ 71 DMU_OT_PACKED_NVLIST, /* UINT8 (XDR by nvlist_pack/unpack) */ 72 DMU_OT_PACKED_NVLIST_SIZE, /* UINT64 */ 73 DMU_OT_BPLIST, /* UINT64 */ 74 DMU_OT_BPLIST_HDR, /* UINT64 */ 75 /* spa: */ 76 DMU_OT_SPACE_MAP_HEADER, /* UINT64 */ 77 DMU_OT_SPACE_MAP, /* UINT64 */ 78 /* zil: */ 79 DMU_OT_INTENT_LOG, /* UINT64 */ 80 /* dmu: */ 81 DMU_OT_DNODE, /* DNODE */ 82 DMU_OT_OBJSET, /* OBJSET */ 83 /* dsl: */ 84 DMU_OT_DSL_DIR, /* UINT64 */ 85 DMU_OT_DSL_DIR_CHILD_MAP, /* ZAP */ 86 DMU_OT_DSL_DS_SNAP_MAP, /* ZAP */ 87 DMU_OT_DSL_PROPS, /* ZAP */ 88 DMU_OT_DSL_DATASET, /* UINT64 */ 89 /* zpl: */ 90 DMU_OT_ZNODE, /* ZNODE */ 91 DMU_OT_ACL, /* ACL */ 92 DMU_OT_PLAIN_FILE_CONTENTS, /* UINT8 */ 93 DMU_OT_DIRECTORY_CONTENTS, /* ZAP */ 94 DMU_OT_MASTER_NODE, /* ZAP */ 95 DMU_OT_DELETE_QUEUE, /* ZAP */ 96 /* zvol: */ 97 DMU_OT_ZVOL, /* UINT8 */ 98 DMU_OT_ZVOL_PROP, /* ZAP */ 99 /* other; for testing only! */ 100 DMU_OT_PLAIN_OTHER, /* UINT8 */ 101 DMU_OT_UINT64_OTHER, /* UINT64 */ 102 DMU_OT_ZAP_OTHER, /* ZAP */ 103 /* new object types: */ 104 DMU_OT_ERROR_LOG, /* ZAP */ 105 106 DMU_OT_NUMTYPES 107 } dmu_object_type_t; 108 109 typedef enum dmu_objset_type { 110 DMU_OST_NONE, 111 DMU_OST_META, 112 DMU_OST_ZFS, 113 DMU_OST_ZVOL, 114 DMU_OST_OTHER, /* For testing only! */ 115 DMU_OST_ANY, /* Be careful! */ 116 DMU_OST_NUMTYPES 117 } dmu_objset_type_t; 118 119 void byteswap_uint64_array(void *buf, size_t size); 120 void byteswap_uint32_array(void *buf, size_t size); 121 void byteswap_uint16_array(void *buf, size_t size); 122 void byteswap_uint8_array(void *buf, size_t size); 123 void zap_byteswap(void *buf, size_t size); 124 void zfs_acl_byteswap(void *buf, size_t size); 125 void zfs_znode_byteswap(void *buf, size_t size); 126 127 #define DS_MODE_NONE 0 /* invalid, to aid debugging */ 128 #define DS_MODE_STANDARD 1 /* normal access, no special needs */ 129 #define DS_MODE_PRIMARY 2 /* the "main" access, e.g. a mount */ 130 #define DS_MODE_EXCLUSIVE 3 /* exclusive access, e.g. to destroy */ 131 #define DS_MODE_LEVELS 4 132 #define DS_MODE_LEVEL(x) ((x) & (DS_MODE_LEVELS - 1)) 133 #define DS_MODE_READONLY 0x8 134 #define DS_MODE_IS_READONLY(x) ((x) & DS_MODE_READONLY) 135 #define DS_MODE_INCONSISTENT 0x10 136 #define DS_MODE_IS_INCONSISTENT(x) ((x) & DS_MODE_INCONSISTENT) 137 138 #define DS_FIND_SNAPSHOTS 0x01 139 140 /* 141 * The maximum number of bytes that can be accessed as part of one 142 * operation, including metadata. 143 */ 144 #define DMU_MAX_ACCESS (10<<20) /* 10MB */ 145 146 /* 147 * Public routines to create, destroy, open, and close objsets. 148 */ 149 int dmu_objset_open(const char *name, dmu_objset_type_t type, int mode, 150 objset_t **osp); 151 void dmu_objset_close(objset_t *os); 152 int dmu_objset_evict_dbufs(objset_t *os, int try); 153 int dmu_objset_create(const char *name, dmu_objset_type_t type, 154 objset_t *clone_parent, 155 void (*func)(objset_t *os, void *arg, dmu_tx_t *tx), void *arg); 156 int dmu_objset_destroy(const char *name); 157 int dmu_objset_rollback(const char *name); 158 int dmu_objset_rename(const char *name, const char *newname); 159 void dmu_objset_set_quota(objset_t *os, uint64_t quota); 160 uint64_t dmu_objset_get_quota(objset_t *os); 161 int dmu_objset_request_reservation(objset_t *os, uint64_t reservation); 162 void dmu_objset_find(char *name, void func(char *, void *), void *arg, 163 int flags); 164 void dmu_objset_byteswap(void *buf, size_t size); 165 166 typedef struct dmu_buf { 167 uint64_t db_object; /* object that this buffer is part of */ 168 uint64_t db_offset; /* byte offset in this object */ 169 uint64_t db_size; /* size of buffer in bytes */ 170 void *db_data; /* data in buffer */ 171 } dmu_buf_t; 172 173 typedef void dmu_buf_evict_func_t(struct dmu_buf *db, void *user_ptr); 174 175 /* 176 * Callback function to perform byte swapping on a block. 177 */ 178 typedef void dmu_byteswap_func_t(void *buf, size_t size); 179 180 /* 181 * The names of zap entries in the DIRECTORY_OBJECT of the MOS. 182 */ 183 #define DMU_POOL_DIRECTORY_OBJECT 1 184 #define DMU_POOL_CONFIG "config" 185 #define DMU_POOL_ROOT_DATASET "root_dataset" 186 #define DMU_POOL_SYNC_BPLIST "sync_bplist" 187 #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub" 188 #define DMU_POOL_ERRLOG_LAST "errlog_last" 189 #define DMU_POOL_SPARES "spares" 190 #define DMU_POOL_DEFLATE "deflate" 191 192 /* 193 * Allocate an object from this objset. The range of object numbers 194 * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode. 195 * 196 * The transaction must be assigned to a txg. The newly allocated 197 * object will be "held" in the transaction (ie. you can modify the 198 * newly allocated object in this transaction). 199 * 200 * dmu_object_alloc() chooses an object and returns it in *objectp. 201 * 202 * dmu_object_claim() allocates a specific object number. If that 203 * number is already allocated, it fails and returns EEXIST. 204 * 205 * Return 0 on success, or ENOSPC or EEXIST as specified above. 206 */ 207 uint64_t dmu_object_alloc(objset_t *os, dmu_object_type_t ot, 208 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 209 int dmu_object_claim(objset_t *os, uint64_t object, dmu_object_type_t ot, 210 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 211 int dmu_object_reclaim(objset_t *os, uint64_t object, dmu_object_type_t ot, 212 int blocksize, dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); 213 214 /* 215 * Free an object from this objset. 216 * 217 * The object's data will be freed as well (ie. you don't need to call 218 * dmu_free(object, 0, -1, tx)). 219 * 220 * The object need not be held in the transaction. 221 * 222 * If there are any holds on this object's buffers (via dmu_buf_hold()), 223 * or tx holds on the object (via dmu_tx_hold_object()), you can not 224 * free it; it fails and returns EBUSY. 225 * 226 * If the object is not allocated, it fails and returns ENOENT. 227 * 228 * Return 0 on success, or EBUSY or ENOENT as specified above. 229 */ 230 int dmu_object_free(objset_t *os, uint64_t object, dmu_tx_t *tx); 231 232 /* 233 * Find the next allocated or free object. 234 * 235 * The objectp parameter is in-out. It will be updated to be the next 236 * object which is allocated. 237 * 238 * XXX Can only be called on a objset with no dirty data. 239 * 240 * Returns 0 on success, or ENOENT if there are no more objects. 241 */ 242 int dmu_object_next(objset_t *os, uint64_t *objectp, boolean_t hole); 243 244 /* 245 * Set the data blocksize for an object. 246 * 247 * The object cannot have any blocks allcated beyond the first. If 248 * the first block is allocated already, the new size must be greater 249 * than the current block size. If these conditions are not met, 250 * ENOTSUP will be returned. 251 * 252 * Returns 0 on success, or EBUSY if there are any holds on the object 253 * contents, or ENOTSUP as described above. 254 */ 255 int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size, 256 int ibs, dmu_tx_t *tx); 257 258 /* 259 * Set the checksum property on a dnode. The new checksum algorithm will 260 * apply to all newly written blocks; existing blocks will not be affected. 261 */ 262 void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum, 263 dmu_tx_t *tx); 264 265 /* 266 * Set the compress property on a dnode. The new compression algorithm will 267 * apply to all newly written blocks; existing blocks will not be affected. 268 */ 269 void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress, 270 dmu_tx_t *tx); 271 272 /* 273 * Decide how many copies of a given block we should make. Can be from 274 * 1 to SPA_DVAS_PER_BP. 275 */ 276 int dmu_get_replication_level(struct spa *spa, struct zbookmark *zb, 277 dmu_object_type_t ot); 278 /* 279 * The bonus data is accessed more or less like a regular buffer. 280 * You must dmu_bonus_hold() to get the buffer, which will give you a 281 * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus 282 * data. As with any normal buffer, you must call dmu_buf_read() to 283 * read db_data, dmu_buf_will_dirty() before modifying it, and the 284 * object must be held in an assigned transaction before calling 285 * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus 286 * buffer as well. You must release your hold with dmu_buf_rele(). 287 */ 288 int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **); 289 int dmu_bonus_max(void); 290 291 /* 292 * Obtain the DMU buffer from the specified object which contains the 293 * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so 294 * that it will remain in memory. You must release the hold with 295 * dmu_buf_rele(). You musn't access the dmu_buf_t after releasing your 296 * hold. You must have a hold on any dmu_buf_t* you pass to the DMU. 297 * 298 * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill 299 * on the returned buffer before reading or writing the buffer's 300 * db_data. The comments for those routines describe what particular 301 * operations are valid after calling them. 302 * 303 * The object number must be a valid, allocated object number. 304 */ 305 int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset, 306 void *tag, dmu_buf_t **); 307 void dmu_buf_add_ref(dmu_buf_t *db, void* tag); 308 void dmu_buf_rele(dmu_buf_t *db, void *tag); 309 uint64_t dmu_buf_refcount(dmu_buf_t *db); 310 311 /* 312 * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a 313 * range of an object. A pointer to an array of dmu_buf_t*'s is 314 * returned (in *dbpp). 315 * 316 * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and 317 * frees the array. The hold on the array of buffers MUST be released 318 * with dmu_buf_rele_array. You can NOT release the hold on each buffer 319 * individually with dmu_buf_rele. 320 */ 321 int dmu_buf_hold_array(objset_t *os, uint64_t object, uint64_t offset, 322 uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp); 323 void dmu_buf_rele_array(dmu_buf_t **, int numbufs, void *tag); 324 325 /* 326 * Returns NULL on success, or the existing user ptr if it's already 327 * been set. 328 * 329 * user_ptr is for use by the user and can be obtained via dmu_buf_get_user(). 330 * 331 * user_data_ptr_ptr should be NULL, or a pointer to a pointer which 332 * will be set to db->db_data when you are allowed to access it. Note 333 * that db->db_data (the pointer) can change when you do dmu_buf_read(), 334 * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill(). 335 * *user_data_ptr_ptr will be set to the new value when it changes. 336 * 337 * If non-NULL, pageout func will be called when this buffer is being 338 * excised from the cache, so that you can clean up the data structure 339 * pointed to by user_ptr. 340 * 341 * dmu_evict_user() will call the pageout func for all buffers in a 342 * objset with a given pageout func. 343 */ 344 void *dmu_buf_set_user(dmu_buf_t *db, void *user_ptr, void *user_data_ptr_ptr, 345 dmu_buf_evict_func_t *pageout_func); 346 /* 347 * set_user_ie is the same as set_user, but request immediate eviction 348 * when hold count goes to zero. 349 */ 350 void *dmu_buf_set_user_ie(dmu_buf_t *db, void *user_ptr, 351 void *user_data_ptr_ptr, dmu_buf_evict_func_t *pageout_func); 352 void *dmu_buf_update_user(dmu_buf_t *db_fake, void *old_user_ptr, 353 void *user_ptr, void *user_data_ptr_ptr, 354 dmu_buf_evict_func_t *pageout_func); 355 void dmu_evict_user(objset_t *os, dmu_buf_evict_func_t *func); 356 357 void dmu_buf_hold_data(dmu_buf_t *db); 358 void dmu_buf_rele_data(dmu_buf_t *db); 359 360 /* 361 * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set. 362 */ 363 void *dmu_buf_get_user(dmu_buf_t *db); 364 365 /* 366 * Indicate that you are going to modify the buffer's data (db_data). 367 * 368 * The transaction (tx) must be assigned to a txg (ie. you've called 369 * dmu_tx_assign()). The buffer's object must be held in the tx 370 * (ie. you've called dmu_tx_hold_object(tx, db->db_object)). 371 */ 372 void dmu_buf_will_dirty(dmu_buf_t *db, dmu_tx_t *tx); 373 374 /* 375 * You must create a transaction, then hold the objects which you will 376 * (or might) modify as part of this transaction. Then you must assign 377 * the transaction to a transaction group. Once the transaction has 378 * been assigned, you can modify buffers which belong to held objects as 379 * part of this transaction. You can't modify buffers before the 380 * transaction has been assigned; you can't modify buffers which don't 381 * belong to objects which this transaction holds; you can't hold 382 * objects once the transaction has been assigned. You may hold an 383 * object which you are going to free (with dmu_object_free()), but you 384 * don't have to. 385 * 386 * You can abort the transaction before it has been assigned. 387 * 388 * Note that you may hold buffers (with dmu_buf_hold) at any time, 389 * regardless of transaction state. 390 */ 391 392 #define DMU_NEW_OBJECT (-1ULL) 393 #define DMU_OBJECT_END (-1ULL) 394 395 dmu_tx_t *dmu_tx_create(objset_t *os); 396 void dmu_tx_hold_write(dmu_tx_t *tx, uint64_t object, uint64_t off, int len); 397 void dmu_tx_hold_free(dmu_tx_t *tx, uint64_t object, uint64_t off, 398 uint64_t len); 399 void dmu_tx_hold_zap(dmu_tx_t *tx, uint64_t object, int add, char *name); 400 void dmu_tx_hold_bonus(dmu_tx_t *tx, uint64_t object); 401 void dmu_tx_abort(dmu_tx_t *tx); 402 int dmu_tx_assign(dmu_tx_t *tx, uint64_t txg_how); 403 void dmu_tx_commit(dmu_tx_t *tx); 404 405 /* 406 * Free up the data blocks for a defined range of a file. If size is 407 * zero, the range from offset to end-of-file is freed. 408 */ 409 int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset, 410 uint64_t size, dmu_tx_t *tx); 411 412 /* 413 * Convenience functions. 414 * 415 * Canfail routines will return 0 on success, or an errno if there is a 416 * nonrecoverable I/O error. 417 */ 418 int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 419 void *buf); 420 void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 421 const void *buf, dmu_tx_t *tx); 422 int dmu_write_uio(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 423 struct uio *uio, dmu_tx_t *tx); 424 425 /* 426 * Asynchronously try to read in the data. 427 */ 428 void dmu_prefetch(objset_t *os, uint64_t object, uint64_t offset, 429 uint64_t len); 430 431 typedef struct dmu_object_info { 432 /* All sizes are in bytes. */ 433 uint32_t doi_data_block_size; 434 uint32_t doi_metadata_block_size; 435 uint64_t doi_bonus_size; 436 dmu_object_type_t doi_type; 437 dmu_object_type_t doi_bonus_type; 438 uint8_t doi_indirection; /* 2 = dnode->indirect->data */ 439 uint8_t doi_checksum; 440 uint8_t doi_compress; 441 uint8_t doi_pad[5]; 442 /* Values below are number of 512-byte blocks. */ 443 uint64_t doi_physical_blks; /* data + metadata */ 444 uint64_t doi_max_block_offset; 445 } dmu_object_info_t; 446 447 typedef struct dmu_object_type_info { 448 dmu_byteswap_func_t *ot_byteswap; 449 boolean_t ot_metadata; 450 char *ot_name; 451 } dmu_object_type_info_t; 452 453 extern const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES]; 454 455 /* 456 * Get information on a DMU object. 457 * 458 * Return 0 on success or ENOENT if object is not allocated. 459 * 460 * If doi is NULL, just indicates whether the object exists. 461 */ 462 int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi); 463 void dmu_object_info_from_dnode(struct dnode *dn, dmu_object_info_t *doi); 464 void dmu_object_info_from_db(dmu_buf_t *db, dmu_object_info_t *doi); 465 void dmu_object_size_from_db(dmu_buf_t *db, uint32_t *blksize, 466 u_longlong_t *nblk512); 467 468 /* 469 * Get the maximum nonzero offset in the object (ie. this offset and all 470 * offsets following are zero). 471 * 472 * XXX Perhaps integrate this with dmu_object_info(), although that 473 * would then have to bring in the indirect blocks. 474 */ 475 uint64_t dmu_object_max_nonzero_offset(objset_t *os, uint64_t object); 476 477 typedef struct dmu_objset_stats { 478 dmu_objset_type_t dds_type; 479 uint8_t dds_is_snapshot; 480 uint8_t dds_inconsistent; 481 uint8_t dds_pad[2]; 482 483 uint64_t dds_creation_time; 484 uint64_t dds_creation_txg; 485 486 char dds_clone_of[MAXNAMELEN]; 487 488 /* How much data is there in this objset? */ 489 490 /* 491 * Space referenced, taking into account pending writes and 492 * frees. Only relavent to filesystems and snapshots (not 493 * collections). 494 */ 495 uint64_t dds_space_refd; 496 497 /* 498 * Space "used", taking into account pending writes and frees, and 499 * children's reservations (in bytes). This is the amount of 500 * space that will be freed if this and all dependent items are 501 * destroyed (eg. child datasets, objsets, and snapshots). So 502 * for snapshots, this is the amount of space unique to this 503 * snapshot. 504 */ 505 uint64_t dds_space_used; 506 507 /* 508 * Compressed and uncompressed bytes consumed. Does not take 509 * into account reservations. Used for computing compression 510 * ratio. 511 */ 512 uint64_t dds_compressed_bytes; 513 uint64_t dds_uncompressed_bytes; 514 515 /* 516 * The ds_fsid_guid is a 56-bit ID that can change to avoid 517 * collisions. The ds_guid is a 64-bit ID that will never 518 * change, so there is a small probability that it will collide. 519 */ 520 uint64_t dds_fsid_guid; 521 522 uint64_t dds_objects_used; /* number of objects used */ 523 uint64_t dds_objects_avail; /* number of objects available */ 524 525 uint64_t dds_num_clones; /* number of clones of this */ 526 527 /* The dataset's administratively-set quota, in bytes. */ 528 uint64_t dds_quota; 529 530 /* The dataset's administratively-set reservation, in bytes */ 531 uint64_t dds_reserved; 532 533 /* 534 * The amount of additional space that this dataset can consume. 535 * Takes into account quotas & reservations. 536 * (Assuming that no other datasets consume it first.) 537 */ 538 uint64_t dds_available; 539 540 /* 541 * Used for debugging purposes 542 */ 543 uint64_t dds_last_txg; 544 } dmu_objset_stats_t; 545 546 /* 547 * Get stats on a dataset. 548 */ 549 void dmu_objset_stats(objset_t *os, dmu_objset_stats_t *dds); 550 551 int dmu_objset_is_snapshot(objset_t *os); 552 553 extern struct spa *dmu_objset_spa(objset_t *os); 554 extern struct zilog *dmu_objset_zil(objset_t *os); 555 extern struct dsl_pool *dmu_objset_pool(objset_t *os); 556 extern struct dsl_dataset *dmu_objset_ds(objset_t *os); 557 extern void dmu_objset_name(objset_t *os, char *buf); 558 extern dmu_objset_type_t dmu_objset_type(objset_t *os); 559 extern uint64_t dmu_objset_id(objset_t *os); 560 extern int dmu_snapshot_list_next(objset_t *os, int namelen, char *name, 561 uint64_t *id, uint64_t *offp); 562 extern int dmu_dir_list_next(objset_t *os, int namelen, char *name, 563 uint64_t *idp, uint64_t *offp); 564 565 /* 566 * Return the txg number for the given assigned transaction. 567 */ 568 uint64_t dmu_tx_get_txg(dmu_tx_t *tx); 569 570 /* 571 * Synchronous write. 572 * On success returns 0 and fills in the blk pointed at by bp. 573 * Note that while the data covered by this function will be on stable 574 * storage when the function returns this new data does not become a 575 * permanent part of the file until the associated transaction commits. 576 */ 577 int dmu_sync(objset_t *os, uint64_t object, uint64_t offset, uint64_t *blkoff, 578 struct blkptr *bp, uint64_t txg); 579 580 /* 581 * Find the next hole or data block in file starting at *off 582 * Return found offset in *off. Return ESRCH for end of file. 583 */ 584 int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole, 585 uint64_t *off); 586 587 /* 588 * Initial setup and final teardown. 589 */ 590 extern void dmu_init(void); 591 extern void dmu_fini(void); 592 593 typedef void (*dmu_traverse_cb_t)(objset_t *os, void *arg, struct blkptr *bp, 594 uint64_t object, uint64_t offset, int len); 595 void dmu_traverse_objset(objset_t *os, uint64_t txg_start, 596 dmu_traverse_cb_t cb, void *arg); 597 598 int dmu_sendbackup(objset_t *tosnap, objset_t *fromsnap, struct vnode *vp); 599 int dmu_recvbackup(char *tosnap, struct drr_begin *drrb, uint64_t *sizep, 600 struct vnode *vp, uint64_t voffset); 601 602 /* CRC64 table */ 603 #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */ 604 extern uint64_t zfs_crc64_table[256]; 605 606 #ifdef __cplusplus 607 } 608 #endif 609 610 #endif /* _SYS_DMU_H */ 611