xref: /illumos-gate/usr/src/uts/Makefile.targ (revision 1e1ddd6cc98ab5af8293f7ebd132be62900730fd)

#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
#ident	"%Z%%M%	%I%	%E% SMI"
#
#	This Makefiles contains the common targets and definitions for
#	all kernels. It is to be included in the Makefiles for specific
#	implementation architectures and processor architecture dependent
#	modules: i.e.: all driving kernel Makefiles.
#

#
#	Default rule for building the lint library directory:
#
$(LINT_LIB_DIR):
	-@mkdir -p $@ 2> /dev/null

#
#	All C objects depend on inline files. However, cc(1) doesn't generate
#	the correct dependency info. Also, these Makefiles don't contain a
#	separate list of C-derived object files (but it is light weight to
#	let the assembler files think they depend upon this when they don't).
#	Fortunately, the inline files won't change very often. So, for now,
#	all objects depend on the inline files. Remove this when the inliner
#	is fixed to drop correct dependency information.
#
$(OBJECTS): $(INLINES)

#
#	Partially link .o files to generate the kmod. The fake dependency
#	on modstubs simplifies things...
#	ELFSIGN_MOD is defined in the individual KCF plug-in modules Makefiles,
#	and will sign the ELF objects using elfsign(1).
#
$(BINARY):		$(OBJECTS)
	$(LD) -r $(LDFLAGS) -o $@ $(OBJECTS)
	$(CTFMERGE_UNIQUIFY_AGAINST_GENUNIX)
	$(POST_PROCESS)
	$(ELFSIGN_MOD)

#
#	This target checks each kmod for undefined entry points. It does not
#	modify the kmod in any way.
#
$(MODULE).check:	FRC
	@BUILD_TYPE=DBG32 $(MAKE) $(MODULE).check.targ

$(MODULE).check.targ:	$(BINARY) $(OBJECTS) $(EXTRA_CHECK_OBJS) $(UNIX_O) $(MODSTUBS_O) $(GENLIB)
	$(LD) -o /dev/null $(OBJECTS) $(EXTRA_CHECK_OBJS) $(UNIX_O) $(MODSTUBS_O) $(GENLIB)

#
#	Module lint library construction targets.
#
MOD_LINT_LIB	= $(LINT_LIB_DIR)/llib-l$(LINT_MODULE).ln

$(MOD_LINT_LIB):	$(LINT_LIB_DIR) $(LINTS)
	@-$(ECHO) "\n$(OBJS_DIR)/$(MODULE): (library construction):"
	@$(LINT) -o $(LINT_MODULE)-$(OBJS_DIR) $(LINTFLAGS) $(LINTS)
	@$(MV) llib-l$(LINT_MODULE)-$(OBJS_DIR).ln $@

$(LINT_MODULE).lint:	$(MOD_LINT_LIB) $(LINT_LIB) $(GEN_LINT_LIB)
	@-$(ECHO) "\n$(OBJS_DIR)/$(LINT_MODULE): global crosschecks:"
	@$(LINT) $(LINTFLAGS) $(MOD_LINT_LIB) $(LINT_LIB) $(GEN_LINT_LIB)

#
# Since assym.h is a derived file, the dependency must be explicit for
# all files including this file. (This is only actually required in the
# instance when the .nse_depinfo file does not exist.) It may seem that
# the lint targets should also have a similar dependency, but they don't
# since only C headers are included when #defined(lint) is true. The
# actual lists are defined in */Makefile.files.
#
$(ASSYM_DEPS:%=$(OBJS_DIR)/%):	$(DSF_DIR)/$(OBJS_DIR)/assym.h

#
#	Everybody need to know how to create a modstubs.o built with the
#	appropriate flags and located in the appropriate location.
#
$(MODSTUBS_O):	$(MODSTUBS)
	$(COMPILE.s) -o $@ $(MODSTUBS)

$(LINTS_DIR)/modstubs.ln:	$(MODSTUBS)
	@($(LHEAD) $(LINT.s) $(MODSTUBS) $(LTAIL))

#
# Build the source file which contains the kernel's utsname,
# with release, version and machine set as follows:
#
#	release: contents of $(RELEASE) (Spaces replaced by '_')
#	version: contents of $(PATCHID) (Spaces replaced by '_')
#	machine: contents of $(UNAME_M)
#
# Build environment information is only contained in the comment section.
#
# The version string, normally the variable VERSION, is set to display
# environmental information temporarily while in development because
# it provides a little more useful information.
#
VERSION_STRING	= ($(ECHO) $$LOGNAME [\`basename $$CODEMGR_WS\`] \\\c; date +%D)
$(INTERNAL_RELEASE_BUILD)VERSION_STRING = $(ECHO) $(PATCHID)

$(OBJS_DIR)/vers.o: $(OBJECTS)
	$(COMPILE.c) -DUTS_RELEASE=\"`$(ECHO) $(RELEASE) | sed -e 's/ /_/g'`\" \
	    -DUTS_VERSION=\"`$(VERSION_STRING) | sed -e 's/ /_/g'`\" \
	    -DUTS_PLATFORM=\"$(UNAME_M)\" -o $@ $(SRC)/uts/common/os/vers.c
	$(CTFCONVERT_O)
	$(POST_PROCESS_O)

$(LINTS_DIR)/vers.ln: $(SRC)/uts/common/os/vers.c
	@($(LHEAD) $(LINT.c) -DUTS_RELEASE=\"\" -DUTS_VERSION=\"\" \
	    -DUTS_PLATFORM=\"\" $(SRC)/uts/common/os/vers.c $(LTAIL))

#
#	Installation targets and rules:
#
$(ROOT_MOD_DIR) $(USR_MOD_DIR):
	-$(INS.dir.root.sys)

$(ROOT_MOD_DIRS_32):	$(ROOT_MOD_DIR)
	-$(INS.dir.root.sys)

$(USR_MOD_DIRS_32):	$(USR_MOD_DIR)
	-$(INS.dir.root.sys)

$(ROOT_MOD_DIR)/%:	$(OBJS_DIR)/% $(ROOT_MOD_DIR) FRC
	$(INS.file)

$(ROOT_CPU_DIR)/%:	$(OBJS_DIR)/% $(ROOT_CPU_DIR) FRC
	$(INS.file)

$(ROOT_DRV_DIR)/%:	$(OBJS_DIR)/% $(ROOT_DRV_DIR) FRC
	$(INS.file)

$(ROOT_DTRACE_DIR)/%:	$(OBJS_DIR)/% $(ROOT_DTRACE_DIR) FRC
	$(INS.file)

$(ROOT_EXEC_DIR)/%:	$(OBJS_DIR)/% $(ROOT_EXEC_DIR) FRC
	$(INS.file)

$(ROOT_FS_DIR)/%:	$(OBJS_DIR)/% $(ROOT_FS_DIR) FRC
	$(INS.file)

$(ROOT_SCHED_DIR)/%:	$(OBJS_DIR)/% $(ROOT_SCHED_DIR) FRC
	$(INS.file)

$(ROOT_STRMOD_DIR)/%:	$(OBJS_DIR)/% $(ROOT_STRMOD_DIR) FRC
	$(INS.file)

$(ROOT_IPP_DIR)/%:	$(OBJS_DIR)/% $(ROOT_IPP_DIR) FRC
	$(INS.file)

$(ROOT_SYS_DIR)/%:	$(OBJS_DIR)/% $(ROOT_SYS_DIR) FRC
	$(INS.file)

$(ROOT_MISC_DIR)/%:	$(OBJS_DIR)/% $(ROOT_MISC_DIR) FRC
	$(INS.file)

$(ROOT_DACF_DIR)/%:	$(OBJS_DIR)/% $(ROOT_DACF_DIR) FRC
	$(INS.file)

$(ROOT_BRAND_DIR)/%:	$(OBJS_DIR)/% $(ROOT_BRAND_DIR) FRC
	$(INS.file)

$(ROOT_CRYPTO_DIR)/%:	$(OBJS_DIR)/% $(ROOT_CRYPTO_DIR) FRC
	$(INS.file)

$(ROOT_KGSS_DIR)/%:	$(OBJS_DIR)/% $(ROOT_KGSS_DIR) FRC
	$(INS.file)

$(ROOT_SCSI_VHCI_DIR)/%: $(OBJS_DIR)/% $(ROOT_SCSI_VHCI_DIR) FRC
	$(INS.file)

$(ROOT_MACH_DIR)/%:	$(OBJS_DIR)/% $(ROOT_MACH_DIR) FRC
	$(INS.file)

$(ROOT_FONT_DIR)/%:	$(OBJS_DIR)/% $(ROOT_MOD_DIR) $(ROOT_FONT_DIR) FRC
	$(INS.file)

$(ROOT_MAC_DIR)/%:	$(OBJS_DIR)/% $(ROOT_MOD_DIR) $(ROOT_MAC_DIR) FRC
	$(INS.file)

$(ROOT_DEVNAME_DIR)/%:	$(OBJS_DIR)/% $(ROOT_DEVNAME_DIR) FRC
	$(INS.file)

$(USR_DRV_DIR)/%:	$(OBJS_DIR)/% $(USR_DRV_DIR) FRC
	$(INS.file)

$(USR_EXEC_DIR)/%:	$(OBJS_DIR)/% $(USR_EXEC_DIR) FRC
	$(INS.file)

$(USR_FS_DIR)/%:	$(OBJS_DIR)/% $(USR_FS_DIR) FRC
	$(INS.file)

$(USR_SCHED_DIR)/%:	$(OBJS_DIR)/% $(USR_SCHED_DIR) FRC
	$(INS.file)

$(USR_STRMOD_DIR)/%:	$(OBJS_DIR)/% $(USR_STRMOD_DIR) FRC
	$(INS.file)

$(USR_SYS_DIR)/%:	$(OBJS_DIR)/% $(USR_SYS_DIR) FRC
	$(INS.file)

$(USR_MISC_DIR)/%:	$(OBJS_DIR)/% $(USR_MISC_DIR) FRC
	$(INS.file)

$(USR_DACF_DIR)/%:	$(OBJS_DIR)/% $(USR_DACF_DIR) FRC
	$(INS.file)

$(USR_PCBE_DIR)/%:	$(OBJS_DIR)/% $(USR_PCBE_DIR) FRC
	$(INS.file)

$(USR_DEVNAME_DIR)/%:	$(OBJS_DIR)/% $(USR_DEVNAME_DIR) FRC
	$(INS.file)

include $(SRC)/Makefile.psm.targ

#
#	Target for 64b modules
#
$(ROOT_KERN_DIR_64):
	-$(INS.dir.root.sys)

$(ROOT_KERN_DIR_64)/%:	$(OBJS_DIR)/% $(ROOT_KERN_DIR_64) FRC
	$(INS.file)

%/$(SUBDIR64):		%
	-$(INS.dir.root.sys)

#
#	Targets for '.conf' file installation.
#
$(ROOT_CONFFILE):	$(SRC_CONFFILE)	$(ROOT_CONFFILE:%/$(CONFFILE)=%)
	$(INS.conffile)

#
#	Targets for '.esa' (activation) file installation.
#
$(ROOT_ACTFILE):
	$(INS.actfile)

#
#	Targets for creating links between common platforms. ROOT_PLAT_LINKS
#	are are the /platform level while ROOT_PLAT_LINKS_2 are one level
#	down (/platform/`uname -i`/{lib|sbin|kernel}.
#
$(ROOT_PLAT_LINKS):
	$(INS.slink1)

$(ROOT_PLAT_LINKS_2):
	$(INS.slink2)

$(USR_PLAT_LINKS):
	$(INS.slink1)

$(USR_PLAT_LINKS_2):
	$(INS.slink2)

#
# multiple builds support
#
def $(DEF_DEPS)			:= TARGET = def
all $(ALL_DEPS)			:= TARGET = all
clean $(CLEAN_DEPS)		:= TARGET = clean
clobber $(CLOBBER_DEPS)		:= TARGET = clobber
lint $(LINT_DEPS)		:= TARGET = lint
modlintlib $(MODLINTLIB_DEPS)	:= TARGET = modlintlib
modlist	$(MODLIST_DEPS)		:= TARGET = modlist
modlist	$(MODLIST_DEPS)		:= NO_STATE= -K $$MODSTATE$$$$
clean.lint $(CLEAN_LINT_DEPS)	:= TARGET = clean.lint
install $(INSTALL_DEPS)		:= TARGET = install
symcheck $(SYM_DEPS)		:= TARGET = symcheck

ALL_TARGS	= def all clean clobber lint modlintlib \
		  clean.lint lintlib install symcheck

ALL_OBJ32	= $(ALL_TARGS:%=%.obj32)

$(ALL_OBJ32):	FRC
	@BUILD_TYPE=OBJ32 VERSION='$(VERSION)' $(MAKE) $(NO_STATE) $(TARGET).targ

ALL_DEBUG32	= $(ALL_TARGS:%=%.debug32)

$(ALL_DEBUG32):	FRC
	@BUILD_TYPE=DBG32 VERSION='$(VERSION)' $(MAKE) $(NO_STATE) $(TARGET).targ

ALL_OBJ64	= $(ALL_TARGS:%=%.obj64)

$(ALL_OBJ64):	FRC
	@BUILD_TYPE=OBJ64 VERSION='$(VERSION)' $(MAKE) $(NO_STATE) $(TARGET).targ

ALL_DEBUG64	= $(ALL_TARGS:%=%.debug64)

$(ALL_DEBUG64):	FRC
	@BUILD_TYPE=DBG64 VERSION='$(VERSION)' $(MAKE) $(NO_STATE) $(TARGET).targ

#
#	Currently only the IP module needs symbol checking on obj64.
#	Other modules have the same global-objs nm output for debug64 and obj64.
#
$(SISCHECK_DEPS):	$(DEF_DEPS)
	@TARG=`$(ECHO) $@ | $(CUT) -d'.' -f2`; \
	MODSYMS=$(MODULE).symbols.$$TARG; \
	if [ -f "$(MODULE).global-objs.$$TARG" ]; then \
		$(GREP) -v '#' $(MODULE).global-objs.$$TARG |$(GREP) . | \
		    $(SORT) -u > $$MODSYMS.tmp; \
		$(NM) $$TARG/$(MODULE) |$(GREP) OBJT |$(GREP) -v UNDEF | \
		    $(CUT) -d'|' -f8 |$(GREP) -v '^___const_' | \
		    $(GREP) -v '\.[0-9]*$$' |$(SORT) -u \
		    > $$MODSYMS.tmp.new; \
		$(DIFF) $$MODSYMS.tmp $$MODSYMS.tmp.new > $$MODSYMS.diff || \
		    ($(ECHO) "warning: $(MODULE) symbol checking:" \
		    "global variable(s) introduced and/or removed."; \
		    $(CAT) $$MODSYMS.diff; exit 1) \
	fi

$(SISCLEAN_DEPS):
	-TARG=`$(ECHO) $@ | $(CUT) -d'.' -f2`; \
	MODSYMS=$(MODULE).symbols.$$TARG; \
	$(RM) $$MODSYMS.tmp $$MODSYMS.tmp.new $$MODSYMS.diff Nothing_to_remove


$(OBJS_DIR):
	-@mkdir -p $@ 2> /dev/null

def.targ:		$(OBJS_DIR) $(ALL_TARGET)

all.targ:		$(OBJS_DIR) $(ALL_TARGET)

lint.targ:		$(OBJS_DIR) $(LINT_TARGET)

modlintlib.targ:	$(OBJS_DIR) $(MOD_LINT_LIB)

install.targ:		$(OBJS_DIR) $(INSTALL_TARGET)

#
# Support for Install.sh.
#

modlist:	$(MODLIST_DEPS)

# paths relative to $(ROOT).
RELMODULE = $(ROOTMODULE:$(ROOT)/%=%)
RELCONF = $(ROOT_CONFFILE:$(ROOT)/%=%)
RELLINK = $(ROOTLINK:$(ROOT)/%=%)
RELUNIX = $(UNIX32_LINK:$(ROOT)/%=%)
RELSOFTLINKS = $(ROOTSOFTLINKS:$(ROOT)/%=%)

MODSRC:sh=		pwd

#
# Changes to this target may require corresponding changes to
# Install.sh.
# Don't issue a MOD entry if it's not in the install list.
#
$(MODLIST_DEPS): FRC
	@case $@ in \
	*32) \
		class=32; \
		relmodule=`dirname $(RELMODULE)`; \
		rellink=`dirname $(RELLINK)`;; \
	*64) \
		class=64; \
		relmodule=`dirname $(RELMODULE)`/$(SUBDIR64); \
		rellink=`dirname $(RELLINK)`/$(SUBDIR64);; \
	esac; \
	if [ -z "$(THISIMPL)" ]; then \
		impl=all; \
	else \
		impl=$(THISIMPL); \
	fi; \
	if [ -n "$(ROOTMODULE)" -a -n "$(INSTALL_TARGET)" ]; then \
		if [ -z "$(MODULE)" ]; then \
			module=`basename $(ROOTMODULE)`; \
		else \
			module=$(MODULE); \
		fi; \
		tinstall="$(INSTALL_TARGET)"; \
		for t in $$tinstall; do \
			if [ "$(ROOTMODULE)" = $$t ]; then \
				echo MOD $$module $$relmodule \
				    $$class $$impl $(MODSRC); \
				break; \
			fi \
		done \
	fi; \
	if [ -n "$(CONF_SRCDIR)" ]; then \
		tinstall="$(INSTALL_TARGET)"; \
		for t in $$tinstall; do \
			if [ $(ROOT_CONFFILE) = $$t ]; then \
				echo CONF $(RELCONF) \
				    $(MODSRC)/$(CONF_SRCDIR) $$impl $$module; \
				break; \
			fi \
		done \
	fi; \
	if [ -n "$(ROOTLINK)" ]; then \
		echo LINK $$relmodule $$module \
		    $$rellink `basename $(RELLINK)` $$impl; \
	fi; \
	if [ -n "$(UNIX32_LINK)" ]; then \
		echo SYMLINK $(SUBDIR64)/$(UNIX) \
		    `dirname $(RELUNIX)` unix $$impl $$module; \
	fi; \
	trelsoftlinks="$(RELSOFTLINKS)"; \
	for t in $$trelsoftlinks; do \
		if [ $$class = 32 ]; then \
			linkdir=`dirname $$t`; \
		else \
			linkdir=`dirname $$t`/$(SUBDIR64); \
		fi; \
		linkname=`basename $$t`; \
		echo SYMLINK $(MODULE) $$linkdir $$linkname \
		    $$impl $$module; \
	done

#
#	Cleanliness is next to ...
#
clean.targ:
	-$(RM) $(CLEANFILES) Nothing_to_remove

clobber.targ:
	-$(RM) $(CLOBBERFILES) Nothing_to_remove

clean.lint.targ:
	-$(RM) $(CLEANLINTFILES) Nothing_to_remove

#
#	Create fake lintlibs in the 64b dirs so
#	global linting works
#
lint64:
	@$(ECHO) $(MODULE) fake lints
	@for dir in $(LINT64_DIRS); do \
		if [ ! -d $$dir ]; then mkdir $$dir; fi \
	done
	@for file in $(LINT64_FILES); do \
		if [ ! -f $$file ]; then touch $$file; fi \
	done

#
#	In some places we also need to create fake lintlibs for 32b
#	dirs so global linting works
#
lint32:
	@$(ECHO) $(MODULE) fake lints
	@for dir in $(LINT32_DIRS); do \
		if [ ! -d $$dir ]; then mkdir $$dir; fi \
	done
	@for file in $(LINT32_FILES); do \
		if [ ! -f $$file ]; then touch $$file; fi \
	done

FRC: