xref: /illumos-gate/usr/src/cmd/fs.d/nfs/svc/nfs-server (revision 0dfe541e)

#!/sbin/sh
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#

#
# Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved.
# Copyright 2016 Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
# Copyright 2018 Nexenta Systems, Inc.  All rights reserved.
#

# Start/stop processes required for server NFS

. /lib/svc/share/smf_include.sh
. /lib/svc/share/ipf_include.sh
zone=`smf_zonename`

#
# Handling a corner case here. If we were in offline state due to an
# unsatisfied dependency, the ipf_method process wouldn't have generated
# the ipfilter configuration. When we transition to online because the
# dependency is satisfied, the start method will have to generate the
# ipfilter configuration. To avoid all possible deadlock scenarios,
# we restart ipfilter which will regenerate the ipfilter configuration
# for the entire system.
#
# The ipf_method process signals that it didn't generate ipf rules by
# removing the service's ipf file. Thus we only restart network/ipfilter
# when the file is missing.
#
configure_ipfilter()
{
	ipfile=`fmri_to_file $SMF_FMRI $IPF_SUFFIX`
	ip6file=`fmri_to_file $SMF_FMRI $IPF6_SUFFIX`
	[ -f "$ipfile" -a -f "$ip6file" ] && return 0

        #
	# Nothing to do if:
        # - ipfilter isn't online
	# - global policy is 'custom'
	# - service's policy is 'use_global'
        #
        service_check_state $IPF_FMRI $SMF_ONLINE || return 0
        [ "`get_global_def_policy`" = "custom" ] && return 0
	[ "`get_policy $SMF_FMRI`" = "use_global" ] && return 0

	svcadm restart $IPF_FMRI
}

case "$1" in
'start')
	# Share all file systems enabled for sharing. sharemgr understands
	# regular shares and ZFS shares and will handle both. Technically,
	# the shares would have been started long before getting here since
	# nfsd has a dependency on them.

	# restart stopped shares from the repository
	/usr/sbin/sharemgr start -P nfs -a

	# Options for nfsd are now set in SMF

	/usr/lib/nfs/mountd
	rc=$?
	if [ $rc != 0 ]; then
		/usr/sbin/svcadm mark -t maintenance svc:/network/nfs/server
		echo "$0: mountd failed with $rc"
		sleep 5 &
		exit $SMF_EXIT_ERR_FATAL
	fi

	/usr/lib/nfs/nfsd
	rc=$?
	if [ $rc != 0 ]; then
		/usr/sbin/svcadm mark -t maintenance svc:/network/nfs/server
		echo "$0: nfsd failed with $rc"
		sleep 5 &
		exit $SMF_EXIT_ERR_FATAL
	fi

	configure_ipfilter
	;;

'refresh')
	/usr/sbin/sharemgr start -P nfs -a
	;;

'stop')
	/usr/bin/pkill -x -u 0,1 -z $zone '(nfsd|mountd)'

	# Unshare all shared file systems using NFS

	/usr/sbin/sharemgr stop -P nfs -a

	# Kill any processes left in service contract
	smf_kill_contract $2 TERM 1
	[ $? -ne 0 ] && exit 1
	;;

'ipfilter')
	#
	# NFS related services are RPC. nfs/server has nfsd which has
	# well-defined port number but mountd is an RPC daemon.
	#
	# Essentially, we generate rules for the following "services"
	#  - nfs/server which has nfsd and mountd
	#  - nfs/rquota
	#
	# The following services are enabled for both nfs client and
	# server, if nfs/client is enabled we'll treat them as client
	# services and simply allow incoming traffic.
	#  - nfs/status
	#  - nfs/nlockmgr
	#  - nfs/cbd
	#
	NFS_FMRI="svc:/network/nfs/server:default"
	NFSCLI_FMRI="svc:/network/nfs/client:default"
	RQUOTA_FMRI="svc:/network/nfs/rquota:default"
	FMRI=$2

	file=`fmri_to_file $FMRI $IPF_SUFFIX`
	file6=`fmri_to_file $FMRI $IPF6_SUFFIX`
	echo "# $FMRI" >$file
	echo "# $FMRI" >$file6
	policy=`get_policy $NFS_FMRI`

	#
	# nfs/server configuration is processed in the start method.
	#
	if [ "$FMRI" = "$NFS_FMRI" ]; then
		service_check_state $FMRI $SMF_ONLINE
		if [ $? -ne 0 ]; then
			rm  $file
			exit $SMF_EXIT_OK
		fi

		nfs_name=`svcprop -p $FW_CONTEXT_PG/name $FMRI 2>/dev/null`
		tport=`$SERVINFO -p -t -s $nfs_name 2>/dev/null`
		if [ -n "$tport" ]; then
			generate_rules $FMRI $policy "tcp" $tport $file
		fi

		tport6=`$SERVINFO -p -t6 -s $nfs_name 2>/dev/null`
		if [ -n "$tport6" ]; then
			generate_rules $FMRI $policy "tcp" $tport6 $file6 _6
		fi

		uport=`$SERVINFO -p -u -s $nfs_name 2>/dev/null`
		if [ -n "$uport" ]; then
			generate_rules $FMRI $policy "udp" $uport $file
		fi

		uport6=`$SERVINFO -p -u6 -s $nfs_name 2>/dev/null`
		if [ -n "$uport6" ]; then
			generate_rules $FMRI $policy "udp" $uport6 $file6 _6
		fi

		# mountd IPv6 ports are also reachable through IPv4, so include
		# them when generating IPv4 rules.
		tports=`$SERVINFO -R -p -t -s "mountd" 2>/dev/null`
		tports6=`$SERVINFO -R -p -t6 -s "mountd" 2>/dev/null`
		if [ -n "$tports" -o -n "$tports6" ]; then
			tports=`unique_ports $tports $tports6`
			for tport in $tports; do
				generate_rules $FMRI $policy "tcp" \
				    $tport $file
			done
		fi

		if [ -n "$tports6" ]; then
			for tport6 in $tports6; do
				generate_rules $FMRI $policy "tcp" \
				    $tport6 $file6 _6
			done
		fi

		uports=`$SERVINFO -R -p -u -s "mountd" 2>/dev/null`
		uports6=`$SERVINFO -R -p -u6 -s "mountd" 2>/dev/null`
		if [ -n "$uports" -o -n "$uports6" ]; then
			uports=`unique_ports $uports $uports6`
			for uport in $uports; do
				generate_rules $FMRI $policy "udp" \
				    $uport $file
			done
		fi

		if [ -n "$uports6" ]; then
			for uport6 in $uports6; do
				generate_rules $FMRI $policy "udp" \
				    $uport6 $file6 _6
			done
		fi

	elif [ "$FMRI" = "$RQUOTA_FMRI" ]; then
		iana_name=`svcprop -p inetd/name $FMRI`

		# rquota IPv6 ports are also reachable through IPv4, so include
		# them when generating IPv4 rules.
		tports=`$SERVINFO -R -p -t -s $iana_name 2>/dev/null`
		tports6=`$SERVINFO -R -p -t6 -s $iana_name 2>/dev/null`
		if [ -n "$tports" -o -n "$tports6" ]; then
			tports=`unique_ports $tports $tports6`
			for tport in $tports; do
				generate_rules $NFS_FMRI $policy "tcp" \
				    $tport $file
			done
		fi

		if [ -n "$tports6" ]; then
			for tport6 in $tports6; do
				generate_rules $NFS_FMRI $policy "tcp" \
				    $tport6 $file6 _6
			done
		fi

		uports=`$SERVINFO -R -p -u -s $iana_name 2>/dev/null`
		uports6=`$SERVINFO -R -p -u6 -s $iana_name 2>/dev/null`
		if [ -n "$uports" -o -n "$uports6" ]; then
			uports=`unique_ports $uports $uports6`
			for uport in $uports; do
				generate_rules $NFS_FMRI $policy "udp" \
				    $uport $file
			done
		fi

		if [ -n "$uports6" ]; then
			for uport6 in $uports6; do
				generate_rules $NFS_FMRI $policy "udp" \
				    $uport6 $file6 _6
			done
		fi
	else
		#
		# Handle the client services here
		#
		if service_check_state $NFSCLI_FMRI $SMF_ONLINE; then
			policy=none
			ip=any
		fi

		restarter=`svcprop -p general/restarter $FMRI 2>/dev/null`
		if [ "$restarter" = "$INETDFMRI" ]; then
			iana_name=`svcprop -p inetd/name $FMRI`
			isrpc=`svcprop -p inetd/isrpc $FMRI`
		else
			iana_name=`svcprop -p $FW_CONTEXT_PG/name $FMRI`
			isrpc=`svcprop -p $FW_CONTEXT_PG/isrpc $FMRI`
		fi

		if [ "$isrpc" = "true" ]; then
			tports=`$SERVINFO -R -p -t -s $iana_name 2>/dev/null`
			tports6=`$SERVINFO -R -p -t6 -s $iana_name 2>/dev/null`
			uports=`$SERVINFO -R -p -u -s $iana_name 2>/dev/null`
			uports6=`$SERVINFO -R -p -u6 -s $iana_name 2>/dev/null`
		else
			tports=`$SERVINFO -p -t -s $iana_name 2>/dev/null`
			tports6=`$SERVINFO -p -t6 -s $iana_name 2>/dev/null`
			uports=`$SERVINFO -p -u -s $iana_name 2>/dev/null`
			uports6=`$SERVINFO -p -u6 -s $iana_name 2>/dev/null`
		fi

		# IPv6 ports are also reachable through IPv4, so include
		# them when generating IPv4 rules.
		if [ -n "$tports" -o -n "$tports6" ]; then
			tports=`unique_ports $tports $tports6`
			for tport in $tports; do
				generate_rules $FMRI $policy "tcp" $tport $file
			done
		fi

		if [ -n "$tports6" ]; then
			for tport6 in $tports6; do
				generate_rules $FMRI $policy "tcp" $tport6 $file6 _6
			done
		fi

		if [ -n "$uports" -o -n "$uports6" ]; then
			uports=`unique_ports $uports $uports6`
			for uport in $uports; do
				generate_rules $FMRI $policy "udp" $uport $file
			done
		fi

		if [ -n "$uports6" ]; then
			for uport6 in $uports6; do
				generate_rules $FMRI $policy "udp" $uport6 $file6 _6
			done
		fi
	fi

	;;

*)
	echo "Usage: $0 { start | stop | refresh }"
	exit 1
	;;
esac
exit $SMF_EXIT_OK