xref: /illumos-gate/usr/src/cmd/cmd-inet/usr.sbin/Makefile (revision c2785286330b58810071fc24f6ca69f401682dff)
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License (the "License").
6# You may not use this file except in compliance with the License.
7#
8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9# or http://www.opensolaris.org/os/licensing.
10# See the License for the specific language governing permissions
11# and limitations under the License.
12#
13# When distributing Covered Code, include this CDDL HEADER in each
14# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15# If applicable, add the following below this CDDL HEADER, with the
16# fields enclosed by brackets "[]" replaced with your own identifying
17# information: Portions Copyright [yyyy] [name of copyright owner]
18#
19# CDDL HEADER END
20#
21
22#
23# Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
24# Use is subject to license terms.
25#
26# ident	"%Z%%M%	%I%	%E% SMI"
27#
28
29SYNCPROG=	syncinit syncloop syncstat
30DHCPPROG=	dhcpconfig dhtadm pntadm
31
32# EXPORT DELETE START
33XMODPROG=	wanbootutil
34# EXPORT DELETE END
35
36PROG=		6to4relay arp gettable if_mpadm \
37		in.comsat in.fingerd in.rarpd in.rexecd in.rlogind \
38		in.rshd in.rwhod in.telnetd in.tftpd ipaddrsel \
39		ndd $(SYNCPROG) $(DHCPPROG) $(XMODPROG)
40
41MANIFEST=	rarp.xml telnet.xml comsat.xml finger.xml \
42		login.xml shell.xml rexec.xml
43
44ROOTFS_PROG=	hostconfig route soconfig
45SBINLINKS=	hostconfig route
46
47RPCSVCPROG=	hostconfig
48AUDITPROG=	in.rexecd in.rlogind in.rshd in.telnetd
49PAMPROG=	in.rexecd in.rlogind in.rshd in.telnetd
50SOCKETPROG=	6to4relay arp gettable hostconfig if_mpadm in.comsat \
51		in.fingerd in.rarpd in.rexecd in.rlogind in.rshd \
52		in.rwhod in.telnetd in.tftpd ipaddrsel route
53NSLPROG=	6to4relay arp gettable hostconfig in.comsat in.rarpd \
54		in.rexecd in.rlogind in.rshd in.rwhod in.telnetd \
55		in.tftpd ipaddrsel route
56CMDPROG=	in.telnetd
57K5PROGS=	in.telnetd in.rlogind in.rshd
58TSNETPROG=	route
59DEFAULTFILES=	telnetd.dfl
60
61PROGSRCS=	$(PROG:%=%.c)
62TFTPDOBJS=	in.tftpd.o tftpsubs.o
63OTHERSRC=	../usr.bin/tftp/tftpsubs.c
64K5RLOGINOBJS=	in.rlogind.o
65K5RSHDOBJS=	in.rshd.o
66K5TELNETOBJS=	in.telnetd.o
67SRCS=		$(PROGSRCS) $(OTHERSRC)
68
69SUBDIRS=	bootconfchk htable ifconfig in.ftpd in.rdisc in.routed \
70		in.talkd inetadm inetconv ipqosconf kssl/kssladm kssl/ksslcfg \
71		ping routeadm snoop sppptun traceroute wificonfig ipsecutils
72
73MSGSUBDIRS=	bootconfchk htable ifconfig in.ftpd in.routed in.talkd inetadm \
74		inetconv ipqosconf kssl/ksslcfg routeadm sppptun snoop \
75		wificonfig
76
77# As programs get lint-clean, add them here and to the 'lint' target.
78# Eventually this hack should go away, and all in PROG should be
79# lint-clean.
80LINTCLEAN=	6to4relay arp in.rlogind in.rshd in.telnetd in.tftpd \
81		ipaddrsel route \
82		in.rarpd if_mpadm $(SYNCPROG)
83# Likewise, as subdirs get lint-clean, add them here.  Once
84# they're all clean, replace the dependency of the lint target
85# with SUBDIRS.  Also (sigh) deal with the commented-out build lines
86# for the lint rule.
87LINTSUBDIRS=	bootconfchk in.rdisc in.routed in.talkd inetadm inetconv \
88		ipqosconf ping routeadm sppptun traceroute wificonfig ipsecutils
89# And as programs are verified not to attempt to write into constants,
90# -xstrconst should be used to ensure they stay that way.
91CONSTCLEAN=
92
93include ../../Makefile.cmd
94ROOTMANIFESTDIR=	$(ROOTSVCNETWORK)
95$(ROOTMANIFEST)		:= FILEMODE= 444
96include ../Makefile.cmd-inet
97
98ROOTSBINPROG = $(ROOTFS_PROG:%=$(ROOTSBIN)/%)
99ROOTUSRSBINLINKS = $(SBINLINKS:%=$(ROOTUSRSBIN)/%)
100
101COMMONOBJS=	addr_match.o kcmd.o store_forw_creds.o
102COMMONSRCS=	$(COMMONOBJS:%.o=$(CMDINETCOMMONDIR)/%.c)
103SRCS+=		$(COMMONSRCS)
104
105#
106# Message catalog
107#
108POFILES=	6to4relay.po if_mpadm.po in.comsat.po ipaddrsel.po route.po
109POFILE=		usr.sbin.po
110
111all:=		TARGET= all
112install:=	TARGET= install
113clean:=		TARGET= clean
114clobber:=	TARGET= clobber
115lint:=		TARGET= lint
116_msg:=		TARGET= _msg
117
118CLOBBERFILES +=	$(ROOTFS_PROG) $(PROG)
119CLEANFILES += $(COMMONOBJS) $(K5RLOGINOBJS) $(K5RSHDOBJS) $(TFTPDOBJS)
120
121CPPFLAGS +=	-DSYSV -DBSD_COMP -I$(CMDINETCOMMONDIR) -I
122
123include $(SRC)/lib/gss_mechs/mech_krb5/Makefile.mech_krb5
124K5LIBS=
125
126# Eventually just plain CFLAGS should be += -v, but not until all in
127# PROGS are lint clean.
128$(LINTCLEAN)		:=	CFLAGS += $(CCVERBOSE)
129$(CONSTCLEAN)		:=	CFLAGS += $(XSTRCONST)
130
131$(SYNCPROG)		:=	LDLIBS += -ldlpi
132$(SOCKETPROG)		:=	LDLIBS += -lsocket
133$(NSLPROG)		:=	LDLIBS += -lnsl
134$(AUDITPROG)		:=	LDLIBS += -lbsm
135$(PAMPROG)		:=	LDLIBS += -lpam
136$(RPCSVCPROG)		:=	LDLIBS += -lrpcsvc
137$(K5PROGS)		:=	LDFLAGS += $(KRUNPATH) \
138				-L$(ROOT)$(KLIBDIR_DO) -L$(ROOT)$(KLIBDIR_GL)
139$(K5PROGS)		:=	K5LIBS=  -lmech_krb5
140$(K5PROGS)		:=	CPPFLAGS += -I$(SRC)/head \
141				-I$(SRC)/uts/common/ \
142				-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
143				-I$(SRC)/lib/gss_mechs/mech_krb5/include \
144				-I$(SRC)/lib/pam_modules/krb5
145LDLIBS +=	$(K5LIBS)
146$(TSNETPROG)		:=	LDLIBS += -ltsnet
147
148in.rarpd		:=	LDLIBS += -linetutil -ldlpi
149route			:=	CPPFLAGS += -DNDEBUG
150ndd			:=	LDLIBS += -ldladm
151gettable in.comsat	:=	LDFLAGS += $(MAPFILE.NGB:%=-M%)
152
153.KEEP_STATE:
154
155.PARALLEL:
156
157all: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) THIRDPARTYLICENSE.arp
158
159#
160# message catalog
161#
162_msg: $(MSGSUBDIRS) $(POFILE)
163
164syncutil: $(SYNCPROG)
165
166$(POFILE): $(POFILES)
167	$(RM) $@
168	cat $(POFILES) > $@
169
170%.o: $(CMDINETCOMMONDIR)/%.c
171	$(COMPILE.c) -o $@ $<
172
173in.telnetd: $(K5TELNETOBJS)
174	$(LINK.c) $(K5TELNETOBJS) -o $@ $(LDLIBS)
175	$(POST_PROCESS)
176
177in.rlogind: $(K5RLOGINOBJS) $(COMMONOBJS)
178	$(LINK.c) $(K5RLOGINOBJS) $(COMMONOBJS) -o $@ $(LDLIBS)
179	$(POST_PROCESS)
180
181in.rshd: $(K5RSHDOBJS) $(COMMONOBJS)
182	$(LINK.c) $(K5RSHDOBJS) $(COMMONOBJS) -o $@ $(LDLIBS)
183	$(POST_PROCESS)
184
185in.tftpd: $(TFTPDOBJS)
186	$(LINK.c) $(TFTPDOBJS) -o $@ $(LDLIBS)
187	$(POST_PROCESS)
188
189tftpsubs.o: $(OTHERSRC)
190	$(COMPILE.c) $(OTHERSRC) -o $@
191	$(POST_PROCESS_O)
192
193$(ROOTUSRSBINLINKS):
194	-$(RM) $@; $(SYMLINK) ../../sbin/$(@F) $@
195
196install: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) .WAIT $(ROOTUSRSBINPROG) \
197	$(ROOTSBINPROG) $(ROOTUSRSBINLINKS) $(ROOTETCDEFAULTFILES) \
198	$(ROOTMANIFEST) THIRDPARTYLICENSE.arp
199
200THIRDPARTYLICENSE.arp: arp.c
201	$(SED) -n '/University of California/,/SUCH DAMAGE/p' arp.c > $@
202
203CLOBBERFILES += THIRDPARTYLICENSE.arp
204
205#
206# The reason this rule checks for the existence of the
207# Makefile is that some of the directories do not exist
208# in our exportable source builds.
209#
210$(SUBDIRS): FRC
211	@if [ -f $@/Makefile  ]; then \
212		cd $@; pwd; $(MAKE) $(TARGET); \
213	else \
214		true; \
215	fi
216
217FRC:
218
219check:	$(CHKMANIFEST)
220
221clean:	$(SUBDIRS)
222	-$(RM) $(CLEANFILES)
223
224clobber: $(SUBDIRS)
225	-$(RM) $(CLEANFILES) $(CLOBBERFILES)
226
227lint: $(LINTSUBDIRS)
228	$(LINT.c) 6to4relay.c $(LDLIBS) -lsocket -lnsl
229	$(LINT.c) arp.c $(LDLIBS) -lsocket -lnsl
230	@# $(LINT.c) in.rexecd.c $(LDLIBS) -lbsm -lpam
231	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \
232		-I$(SRC)/head -I$(SRC)/uts/common/ \
233		-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
234		-I$(SRC)/lib/gss_mechs/mech_krb5/include \
235		-I$(SRC)/lib/pam_modules/krb5 \
236		in.rlogind.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl
237	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \
238		-I$(SRC)/head -I$(SRC)/uts/common/ \
239		-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
240		-I$(SRC)/lib/gss_mechs/mech_krb5/include \
241		-I$(SRC)/lib/pam_modules/krb5 \
242		in.rshd.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl
243	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 \
244		-erroff=E_GLOBAL_COULD_BE_STATIC2 \
245		-I$(SRC)/head -I$(SRC)/uts/common/ \
246		-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
247		-I$(SRC)/lib/gss_mechs/mech_krb5/include \
248		-I$(SRC)/lib/pam_modules/krb5 \
249		in.telnetd.c $(LDLIBS) -lbsm -lpam -lsocket -lnsl
250	$(LINT.c) if_mpadm.c $(LDLIBS) -lsocket -lnsl -lipmp
251	$(LINT.c) ipaddrsel.c $(LDLIBS) -lsocket -lnsl
252	$(LINT.c) route.c $(LDLIBS) -lsocket -lnsl -ltsnet
253	$(LINT.c) syncinit.c $(LDLIBS) -ldlpi
254	$(LINT.c) syncloop.c $(LDLIBS) -ldlpi
255	$(LINT.c) syncstat.c $(LDLIBS) -ldlpi
256	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 in.rarpd.c $(LDLIBS) \
257	    -lsocket -lnsl
258	$(LINT.c) in.tftpd.c ../usr.bin/tftp/tftpsubs.c $(LDLIBS) \
259	    -lsocket -lnsl
260
261# EXPORT DELETE START
262EXPORT_SRC:
263	$(RM) Makefile+
264	sed -e "/^# EXPORT DELETE START/,/^# EXPORT DELETE END/d" \
265		< Makefile > Makefile+
266	$(RM) Makefile
267	$(MV) Makefile+ Makefile
268	$(CHMOD) 444 Makefile
269# EXPORT DELETE END
270