1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright (c) 2006, 2010, Oracle and/or its affiliates. All rights reserved.
23  */
24 
25 #include <sys/nxge/nxge_impl.h>
26 #include <sys/nxge/nxge_mac.h>
27 #include <sys/nxge/nxge_hio.h>
28 
29 /*
30  * Local defines for FWARC 2006/556
31  */
32 #define	NXGE_NIU_TDMA_PROP_LEN		2
33 #define	NXGE_NIU_RDMA_PROP_LEN		2
34 #define	NXGE_NIU_0_INTR_PROP_LEN	19
35 #define	NXGE_NIU_1_INTR_PROP_LEN	17
36 
37 /*
38  * Local functions.
39  */
40 static void nxge_get_niu_property(dev_info_t *, niu_type_t *);
41 static nxge_status_t nxge_get_mac_addr_properties(p_nxge_t);
42 static nxge_status_t nxge_use_cfg_n2niu_properties(p_nxge_t);
43 static void nxge_use_cfg_neptune_properties(p_nxge_t);
44 static void nxge_use_cfg_dma_config(p_nxge_t);
45 static void nxge_use_cfg_vlan_class_config(p_nxge_t);
46 static void nxge_use_cfg_mac_class_config(p_nxge_t);
47 static void nxge_use_cfg_class_config(p_nxge_t);
48 static void nxge_use_cfg_link_cfg(p_nxge_t);
49 static void nxge_set_hw_dma_config(p_nxge_t);
50 static void nxge_set_hw_vlan_class_config(p_nxge_t);
51 static void nxge_set_hw_mac_class_config(p_nxge_t);
52 static void nxge_set_hw_class_config(p_nxge_t);
53 static nxge_status_t nxge_use_default_dma_config_n2(p_nxge_t);
54 static void nxge_ldgv_setup(p_nxge_ldg_t *, p_nxge_ldv_t *, uint8_t,
55 	uint8_t, int *);
56 static void nxge_init_mmac(p_nxge_t, boolean_t);
57 static void nxge_set_rdc_intr_property(p_nxge_t);
58 
59 uint32_t nxge_use_hw_property = 1;
60 uint32_t nxge_groups_per_port = 2;
61 
62 extern uint32_t nxge_use_partition;
63 extern uint32_t nxge_dma_obp_props_only;
64 
65 extern uint_t nxge_rx_intr(char *, char *);
66 extern uint_t nxge_tx_intr(char *, char *);
67 extern uint_t nxge_mif_intr(char *, char *);
68 extern uint_t nxge_mac_intr(char *, char *);
69 extern uint_t nxge_syserr_intr(char *, char *);
70 extern void *nxge_list;
71 
72 #define	NXGE_SHARED_REG_SW_SIM
73 
74 #ifdef NXGE_SHARED_REG_SW_SIM
75 uint64_t global_dev_ctrl = 0;
76 #endif
77 
78 #define	MAX_SIBLINGS	NXGE_MAX_PORTS
79 
80 extern uint32_t nxge_rbr_size;
81 extern uint32_t nxge_rcr_size;
82 extern uint32_t nxge_tx_ring_size;
83 extern uint32_t nxge_rbr_spare_size;
84 
85 extern npi_status_t npi_mac_altaddr_disable(npi_handle_t, uint8_t, uint8_t);
86 
87 static uint8_t p2_tx_fair[2] = {12, 12};
88 static uint8_t p2_tx_equal[2] = {12, 12};
89 static uint8_t p4_tx_fair[4] = {6, 6, 6, 6};
90 static uint8_t p4_tx_equal[4] = {6, 6, 6, 6};
91 static uint8_t p2_rx_fair[2] = {8, 8};
92 static uint8_t p2_rx_equal[2] = {8, 8};
93 static uint8_t p4_rx_fair[4] = {4, 4, 4, 4};
94 static uint8_t p4_rx_equal[4] = {4, 4, 4, 4};
95 
96 static uint8_t p2_rdcgrp_fair[2] = {4, 4};
97 static uint8_t p2_rdcgrp_equal[2] = {4, 4};
98 static uint8_t p4_rdcgrp_fair[4] = {2, 2, 1, 1};
99 static uint8_t p4_rdcgrp_equal[4] = {2, 2, 2, 2};
100 static uint8_t p2_rdcgrp_cls[2] = {1, 1};
101 static uint8_t p4_rdcgrp_cls[4] = {1, 1, 1, 1};
102 
103 static uint8_t rx_4_1G[4] = {4, 4, 4, 4};
104 static uint8_t rx_2_10G[2] = {8, 8};
105 static uint8_t rx_2_10G_2_1G[4] = {6, 6, 2, 2};
106 static uint8_t rx_1_10G_3_1G[4] = {10, 2, 2, 2};
107 static uint8_t rx_1_1G_1_10G_2_1G[4] = {2, 10, 2, 2};
108 
109 static uint8_t tx_4_1G[4] = {6, 6, 6, 6};
110 static uint8_t tx_2_10G[2] = {12, 12};
111 static uint8_t tx_2_10G_2_1G[4] = {10, 10, 2, 2};
112 static uint8_t tx_1_10G_3_1G[4] = {12, 4, 4, 4};
113 static uint8_t tx_1_1G_1_10G_2_1G[4] = {4, 12, 4, 4};
114 
115 typedef enum {
116 	DEFAULT = 0,
117 	EQUAL,
118 	FAIR,
119 	CUSTOM,
120 	CLASSIFY,
121 	L2_CLASSIFY,
122 	L3_DISTRIBUTE,
123 	L3_CLASSIFY,
124 	L3_TCAM,
125 	CONFIG_TOKEN_NONE
126 } config_token_t;
127 
128 static char *token_names[] = {
129 	"default",
130 	"equal",
131 	"fair",
132 	"custom",
133 	"classify",
134 	"l2_classify",
135 	"l3_distribute",
136 	"l3_classify",
137 	"l3_tcam",
138 	"none",
139 };
140 
141 void nxge_virint_regs_dump(p_nxge_t nxgep);
142 
143 void
nxge_virint_regs_dump(p_nxge_t nxgep)144 nxge_virint_regs_dump(p_nxge_t nxgep)
145 {
146 	npi_handle_t handle;
147 
148 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_virint_regs_dump"));
149 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
150 	(void) npi_vir_dump_pio_fzc_regs_one(handle);
151 	(void) npi_vir_dump_ldgnum(handle);
152 	(void) npi_vir_dump_ldsv(handle);
153 	(void) npi_vir_dump_imask0(handle);
154 	(void) npi_vir_dump_sid(handle);
155 	(void) npi_mac_dump_regs(handle, nxgep->function_num);
156 	(void) npi_ipp_dump_regs(handle, nxgep->function_num);
157 	(void) npi_fflp_dump_regs(handle);
158 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_virint_regs_dump"));
159 }
160 
161 /*
162  * For now: we hard coded the DMA configurations.
163  *	    and assume for one partition only.
164  *
165  *       OBP. Then OBP will pass this partition's
166  *	 Neptune configurations to fcode to create
167  *	 properties for them.
168  *
169  *	Since Neptune(PCI-E) and NIU (Niagara-2) has
170  *	different bus interfaces, the driver needs
171  *	to know which bus it is connected to.
172  *  	Ravinder suggested: create a device property.
173  *	In partitioning environment, we cannot
174  *	use .conf file (need to check). If conf changes,
175  *	need to reboot the system.
176  *	The following function assumes that we will
177  *	retrieve its properties from a virtualized nexus driver.
178  */
179 
180 nxge_status_t
nxge_cntlops(dev_info_t * dip,nxge_ctl_enum_t ctlop,void * arg,void * result)181 nxge_cntlops(dev_info_t *dip, nxge_ctl_enum_t ctlop, void *arg, void *result)
182 {
183 	nxge_status_t status = NXGE_OK;
184 	int instance;
185 	p_nxge_t nxgep;
186 
187 #ifndef NXGE_SHARED_REG_SW_SIM
188 	npi_handle_t handle;
189 	uint16_t sr16, cr16;
190 #endif
191 	instance = ddi_get_instance(dip);
192 	NXGE_DEBUG_MSG((NULL, VIR_CTL, "Instance %d ", instance));
193 
194 	if (nxge_list == NULL) {
195 		NXGE_ERROR_MSG((NULL, NXGE_ERR_CTL,
196 		    "nxge_cntlops: nxge_list null"));
197 		return (NXGE_ERROR);
198 	}
199 	nxgep = (p_nxge_t)ddi_get_soft_state(nxge_list, instance);
200 	if (nxgep == NULL) {
201 		NXGE_ERROR_MSG((NULL, NXGE_ERR_CTL,
202 		    "nxge_cntlops: nxgep null"));
203 		return (NXGE_ERROR);
204 	}
205 #ifndef NXGE_SHARED_REG_SW_SIM
206 	handle = nxgep->npi_reg_handle;
207 #endif
208 	switch (ctlop) {
209 	case NXGE_CTLOPS_NIUTYPE:
210 		nxge_get_niu_property(dip, (niu_type_t *)result);
211 		return (status);
212 
213 	case NXGE_CTLOPS_GET_SHARED_REG:
214 #ifdef NXGE_SHARED_REG_SW_SIM
215 		*(uint64_t *)result = global_dev_ctrl;
216 		return (0);
217 #else
218 		status = npi_dev_func_sr_sr_get(handle, &sr16);
219 		*(uint16_t *)result = sr16;
220 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
221 		    "nxge_cntlops: NXGE_CTLOPS_GET_SHARED_REG"));
222 		return (0);
223 #endif
224 
225 	case NXGE_CTLOPS_SET_SHARED_REG_LOCK:
226 #ifdef NXGE_SHARED_REG_SW_SIM
227 		global_dev_ctrl = *(uint64_t *)arg;
228 		return (0);
229 #else
230 		status = NPI_FAILURE;
231 		while (status != NPI_SUCCESS)
232 			status = npi_dev_func_sr_lock_enter(handle);
233 
234 		sr16 = *(uint16_t *)arg;
235 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
236 		status = npi_dev_func_sr_lock_free(handle);
237 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
238 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
239 		return (0);
240 #endif
241 
242 	case NXGE_CTLOPS_UPDATE_SHARED_REG:
243 #ifdef NXGE_SHARED_REG_SW_SIM
244 		global_dev_ctrl |= *(uint64_t *)arg;
245 		return (0);
246 #else
247 		status = NPI_FAILURE;
248 		while (status != NPI_SUCCESS)
249 			status = npi_dev_func_sr_lock_enter(handle);
250 		status = npi_dev_func_sr_sr_get(handle, &sr16);
251 		sr16 |= *(uint16_t *)arg;
252 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
253 		status = npi_dev_func_sr_lock_free(handle);
254 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
255 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
256 		return (0);
257 #endif
258 
259 	case NXGE_CTLOPS_CLEAR_BIT_SHARED_REG_UL:
260 #ifdef NXGE_SHARED_REG_SW_SIM
261 		global_dev_ctrl |= *(uint64_t *)arg;
262 		return (0);
263 #else
264 		status = npi_dev_func_sr_sr_get(handle, &sr16);
265 		cr16 = *(uint16_t *)arg;
266 		sr16 &= ~cr16;
267 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
268 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
269 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
270 		return (0);
271 #endif
272 
273 	case NXGE_CTLOPS_CLEAR_BIT_SHARED_REG:
274 #ifdef NXGE_SHARED_REG_SW_SIM
275 		global_dev_ctrl |= *(uint64_t *)arg;
276 		return (0);
277 #else
278 		status = NPI_FAILURE;
279 		while (status != NPI_SUCCESS)
280 			status = npi_dev_func_sr_lock_enter(handle);
281 		status = npi_dev_func_sr_sr_get(handle, &sr16);
282 		cr16 = *(uint16_t *)arg;
283 		sr16 &= ~cr16;
284 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
285 		status = npi_dev_func_sr_lock_free(handle);
286 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
287 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
288 		return (0);
289 #endif
290 
291 	case NXGE_CTLOPS_GET_LOCK_BLOCK:
292 #ifdef NXGE_SHARED_REG_SW_SIM
293 		global_dev_ctrl |= *(uint64_t *)arg;
294 		return (0);
295 #else
296 		status = NPI_FAILURE;
297 		while (status != NPI_SUCCESS)
298 			status = npi_dev_func_sr_lock_enter(handle);
299 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
300 		    "nxge_cntlops: NXGE_CTLOPS_GET_LOCK_BLOCK"));
301 		return (0);
302 #endif
303 	case NXGE_CTLOPS_GET_LOCK_TRY:
304 #ifdef NXGE_SHARED_REG_SW_SIM
305 		global_dev_ctrl |= *(uint64_t *)arg;
306 		return (0);
307 #else
308 		status = npi_dev_func_sr_lock_enter(handle);
309 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
310 		    "nxge_cntlops: NXGE_CTLOPS_GET_LOCK_TRY"));
311 		if (status == NPI_SUCCESS)
312 			return (NXGE_OK);
313 		else
314 			return (NXGE_ERROR);
315 #endif
316 	case NXGE_CTLOPS_FREE_LOCK:
317 #ifdef NXGE_SHARED_REG_SW_SIM
318 		global_dev_ctrl |= *(uint64_t *)arg;
319 		return (0);
320 #else
321 		status = npi_dev_func_sr_lock_free(handle);
322 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
323 		    "nxge_cntlops: NXGE_CTLOPS_GET_LOCK_FREE"));
324 		if (status == NPI_SUCCESS)
325 			return (NXGE_OK);
326 		else
327 			return (NXGE_ERROR);
328 #endif
329 
330 	default:
331 		status = NXGE_ERROR;
332 	}
333 
334 	return (status);
335 }
336 
337 void
nxge_common_lock_get(p_nxge_t nxgep)338 nxge_common_lock_get(p_nxge_t nxgep)
339 {
340 	uint32_t status = NPI_FAILURE;
341 	npi_handle_t handle;
342 
343 #if	defined(NXGE_SHARE_REG_SW_SIM)
344 	return;
345 #endif
346 	handle = nxgep->npi_reg_handle;
347 	while (status != NPI_SUCCESS)
348 		status = npi_dev_func_sr_lock_enter(handle);
349 }
350 
351 void
nxge_common_lock_free(p_nxge_t nxgep)352 nxge_common_lock_free(p_nxge_t nxgep)
353 {
354 	npi_handle_t handle;
355 
356 #if	defined(NXGE_SHARE_REG_SW_SIM)
357 	return;
358 #endif
359 	handle = nxgep->npi_reg_handle;
360 	(void) npi_dev_func_sr_lock_free(handle);
361 }
362 
363 
364 static void
nxge_get_niu_property(dev_info_t * dip,niu_type_t * niu_type)365 nxge_get_niu_property(dev_info_t *dip, niu_type_t *niu_type)
366 {
367 	uchar_t *prop_val;
368 	uint_t prop_len;
369 
370 	*niu_type = NIU_TYPE_NONE;
371 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0,
372 	    "niu-type", (uchar_t **)&prop_val,
373 	    &prop_len) == DDI_PROP_SUCCESS) {
374 		if (strncmp("niu", (caddr_t)prop_val, (size_t)prop_len) == 0) {
375 			*niu_type = N2_NIU;
376 		}
377 		ddi_prop_free(prop_val);
378 	}
379 }
380 
381 static config_token_t
nxge_get_config_token(char * prop)382 nxge_get_config_token(char *prop)
383 {
384 	config_token_t token = DEFAULT;
385 
386 	while (token < CONFIG_TOKEN_NONE) {
387 		if (strncmp(prop, token_names[token], 4) == 0)
388 			break;
389 		token++;
390 	}
391 	return (token);
392 }
393 
394 /* per port */
395 
396 static nxge_status_t
nxge_update_rxdma_grp_properties(p_nxge_t nxgep,config_token_t token,dev_info_t * s_dip[])397 nxge_update_rxdma_grp_properties(p_nxge_t nxgep, config_token_t token,
398 	dev_info_t *s_dip[])
399 {
400 	nxge_status_t status = NXGE_OK;
401 	int ddi_status;
402 	int num_ports = nxgep->nports;
403 	int port, bits, j;
404 	uint8_t start_grp = 0, num_grps = 0;
405 	p_nxge_param_t param_arr;
406 	uint32_t grp_bitmap[MAX_SIBLINGS];
407 	int custom_start_grp[MAX_SIBLINGS];
408 	int custom_num_grp[MAX_SIBLINGS];
409 	uint8_t bad_config = B_FALSE;
410 	char *start_prop, *num_prop, *cfg_prop;
411 
412 	start_grp = 0;
413 	param_arr = nxgep->param_arr;
414 	start_prop = param_arr[param_rdc_grps_start].fcode_name;
415 	num_prop = param_arr[param_rx_rdc_grps].fcode_name;
416 
417 	switch (token) {
418 	case FAIR:
419 		cfg_prop = "fair";
420 		for (port = 0; port < num_ports; port++) {
421 			custom_num_grp[port] =
422 			    (num_ports == 4) ?
423 			    p4_rdcgrp_fair[port] :
424 			    p2_rdcgrp_fair[port];
425 			custom_start_grp[port] = start_grp;
426 			start_grp += custom_num_grp[port];
427 		}
428 		break;
429 
430 	case EQUAL:
431 		cfg_prop = "equal";
432 		for (port = 0; port < num_ports; port++) {
433 			custom_num_grp[port] =
434 			    (num_ports == 4) ?
435 			    p4_rdcgrp_equal[port] :
436 			    p2_rdcgrp_equal[port];
437 			custom_start_grp[port] = start_grp;
438 			start_grp += custom_num_grp[port];
439 		}
440 		break;
441 
442 
443 	case CLASSIFY:
444 		cfg_prop = "classify";
445 		for (port = 0; port < num_ports; port++) {
446 			custom_num_grp[port] = (num_ports == 4) ?
447 			    p4_rdcgrp_cls[port] : p2_rdcgrp_cls[port];
448 			custom_start_grp[port] = start_grp;
449 			start_grp += custom_num_grp[port];
450 		}
451 		break;
452 
453 	case CUSTOM:
454 		cfg_prop = "custom";
455 		/* See if it is good config */
456 		num_grps = 0;
457 		for (port = 0; port < num_ports; port++) {
458 			custom_start_grp[port] =
459 			    ddi_prop_get_int(DDI_DEV_T_NONE, s_dip[port],
460 			    DDI_PROP_DONTPASS, start_prop, -1);
461 			if ((custom_start_grp[port] == -1) ||
462 			    (custom_start_grp[port] >=
463 			    NXGE_MAX_RDC_GRPS)) {
464 				bad_config = B_TRUE;
465 				break;
466 			}
467 			custom_num_grp[port] = ddi_prop_get_int(
468 			    DDI_DEV_T_NONE,
469 			    s_dip[port],
470 			    DDI_PROP_DONTPASS,
471 			    num_prop, -1);
472 
473 			if ((custom_num_grp[port] == -1) ||
474 			    (custom_num_grp[port] >
475 			    NXGE_MAX_RDC_GRPS) ||
476 			    ((custom_num_grp[port] +
477 			    custom_start_grp[port]) >=
478 			    NXGE_MAX_RDC_GRPS)) {
479 				bad_config = B_TRUE;
480 				break;
481 			}
482 			num_grps += custom_num_grp[port];
483 			if (num_grps > NXGE_MAX_RDC_GRPS) {
484 				bad_config = B_TRUE;
485 				break;
486 			}
487 			grp_bitmap[port] = 0;
488 			for (bits = 0;
489 			    bits < custom_num_grp[port];
490 			    bits++) {
491 				grp_bitmap[port] |=
492 				    (1 << (bits + custom_start_grp[port]));
493 			}
494 
495 		}
496 
497 		if (bad_config == B_FALSE) {
498 			/* check for overlap */
499 			for (port = 0; port < num_ports - 1; port++) {
500 				for (j = port + 1; j < num_ports; j++) {
501 					if (grp_bitmap[port] &
502 					    grp_bitmap[j]) {
503 						bad_config = B_TRUE;
504 						break;
505 					}
506 				}
507 				if (bad_config == B_TRUE)
508 					break;
509 			}
510 		}
511 		if (bad_config == B_TRUE) {
512 			/* use default config */
513 			for (port = 0; port < num_ports; port++) {
514 				custom_num_grp[port] =
515 				    (num_ports == 4) ?
516 				    p4_rx_fair[port] : p2_rx_fair[port];
517 				custom_start_grp[port] = start_grp;
518 				start_grp += custom_num_grp[port];
519 			}
520 		}
521 		break;
522 
523 	default:
524 		/* use default config */
525 		cfg_prop = "fair";
526 		for (port = 0; port < num_ports; port++) {
527 			custom_num_grp[port] = (num_ports == 4) ?
528 			    p4_rx_fair[port] : p2_rx_fair[port];
529 			custom_start_grp[port] = start_grp;
530 			start_grp += custom_num_grp[port];
531 		}
532 		break;
533 	}
534 
535 	/* Now Update the rx properties */
536 	for (port = 0; port < num_ports; port++) {
537 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
538 		    "rxdma-grp-cfg", cfg_prop);
539 		if (ddi_status != DDI_PROP_SUCCESS) {
540 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
541 			    " property %s not updating",
542 			    cfg_prop));
543 			status |= NXGE_DDI_FAILED;
544 		}
545 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
546 		    num_prop, custom_num_grp[port]);
547 
548 		if (ddi_status != DDI_PROP_SUCCESS) {
549 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
550 			    " property %s not updating",
551 			    num_prop));
552 			status |= NXGE_DDI_FAILED;
553 		}
554 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
555 		    start_prop, custom_start_grp[port]);
556 
557 		if (ddi_status != DDI_PROP_SUCCESS) {
558 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
559 			    " property %s not updating",
560 			    start_prop));
561 			status |= NXGE_DDI_FAILED;
562 		}
563 	}
564 	if (status & NXGE_DDI_FAILED)
565 		status |= NXGE_ERROR;
566 
567 	return (status);
568 }
569 
570 static nxge_status_t
nxge_update_rxdma_properties(p_nxge_t nxgep,config_token_t token,dev_info_t * s_dip[])571 nxge_update_rxdma_properties(p_nxge_t nxgep, config_token_t token,
572 	dev_info_t *s_dip[])
573 {
574 	nxge_status_t status = NXGE_OK;
575 	int ddi_status;
576 	int num_ports = nxgep->nports;
577 	int port, bits, j;
578 	uint8_t start_rdc = 0, num_rdc = 0;
579 	p_nxge_param_t param_arr;
580 	uint32_t rdc_bitmap[MAX_SIBLINGS];
581 	int custom_start_rdc[MAX_SIBLINGS];
582 	int custom_num_rdc[MAX_SIBLINGS];
583 	uint8_t bad_config = B_FALSE;
584 	int *prop_val;
585 	uint_t prop_len;
586 	char *start_rdc_prop, *num_rdc_prop, *cfg_prop;
587 
588 	start_rdc = 0;
589 	param_arr = nxgep->param_arr;
590 	start_rdc_prop = param_arr[param_rxdma_channels_begin].fcode_name;
591 	num_rdc_prop = param_arr[param_rxdma_channels].fcode_name;
592 
593 	switch (token) {
594 	case FAIR:
595 		cfg_prop = "fair";
596 		for (port = 0; port < num_ports; port++) {
597 			custom_num_rdc[port] = (num_ports == 4) ?
598 			    p4_rx_fair[port] : p2_rx_fair[port];
599 			custom_start_rdc[port] = start_rdc;
600 			start_rdc += custom_num_rdc[port];
601 		}
602 		break;
603 
604 	case EQUAL:
605 		cfg_prop = "equal";
606 		for (port = 0; port < num_ports; port++) {
607 			custom_num_rdc[port] = (num_ports == 4) ?
608 			    p4_rx_equal[port] :
609 			    p2_rx_equal[port];
610 			custom_start_rdc[port] = start_rdc;
611 			start_rdc += custom_num_rdc[port];
612 		}
613 		break;
614 
615 	case CUSTOM:
616 		cfg_prop = "custom";
617 		/* See if it is good config */
618 		num_rdc = 0;
619 		for (port = 0; port < num_ports; port++) {
620 			ddi_status = ddi_prop_lookup_int_array(
621 			    DDI_DEV_T_ANY,
622 			    s_dip[port], 0,
623 			    start_rdc_prop,
624 			    &prop_val,
625 			    &prop_len);
626 			if (ddi_status == DDI_SUCCESS)
627 				custom_start_rdc[port] = *prop_val;
628 			else {
629 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
630 				    " %s custom start port %d"
631 				    " read failed ",
632 				    " rxdma-cfg", port));
633 				bad_config = B_TRUE;
634 				status |= NXGE_DDI_FAILED;
635 			}
636 			if ((custom_start_rdc[port] == -1) ||
637 			    (custom_start_rdc[port] >=
638 			    NXGE_MAX_RDCS)) {
639 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
640 				    " %s custom start %d"
641 				    " out of range %x ",
642 				    " rxdma-cfg",
643 				    port,
644 				    custom_start_rdc[port]));
645 				bad_config = B_TRUE;
646 				break;
647 			}
648 			ddi_status = ddi_prop_lookup_int_array(
649 			    DDI_DEV_T_ANY,
650 			    s_dip[port],
651 			    0,
652 			    num_rdc_prop,
653 			    &prop_val,
654 			    &prop_len);
655 
656 			if (ddi_status == DDI_SUCCESS)
657 				custom_num_rdc[port] = *prop_val;
658 			else {
659 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
660 				    " %s custom num port %d"
661 				    " read failed ",
662 				    "rxdma-cfg", port));
663 				bad_config = B_TRUE;
664 				status |= NXGE_DDI_FAILED;
665 			}
666 
667 			if ((custom_num_rdc[port] == -1) ||
668 			    (custom_num_rdc[port] >
669 			    NXGE_MAX_RDCS) ||
670 			    ((custom_num_rdc[port] +
671 			    custom_start_rdc[port]) >
672 			    NXGE_MAX_RDCS)) {
673 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
674 				    " %s custom num %d"
675 				    " out of range %x ",
676 				    " rxdma-cfg",
677 				    port, custom_num_rdc[port]));
678 				bad_config = B_TRUE;
679 				break;
680 			}
681 			num_rdc += custom_num_rdc[port];
682 			if (num_rdc > NXGE_MAX_RDCS) {
683 				bad_config = B_TRUE;
684 				break;
685 			}
686 			rdc_bitmap[port] = 0;
687 			for (bits = 0;
688 			    bits < custom_num_rdc[port]; bits++) {
689 				rdc_bitmap[port] |=
690 				    (1 << (bits + custom_start_rdc[port]));
691 			}
692 		}
693 
694 		if (bad_config == B_FALSE) {
695 			/* check for overlap */
696 			for (port = 0; port < num_ports - 1; port++) {
697 				for (j = port + 1; j < num_ports; j++) {
698 					if (rdc_bitmap[port] &
699 					    rdc_bitmap[j]) {
700 						NXGE_DEBUG_MSG((nxgep,
701 						    CFG_CTL,
702 						    " rxdma-cfg"
703 						    " property custom"
704 						    " bit overlap"
705 						    " %d %d ",
706 						    port, j));
707 						bad_config = B_TRUE;
708 						break;
709 					}
710 				}
711 				if (bad_config == B_TRUE)
712 					break;
713 			}
714 		}
715 		if (bad_config == B_TRUE) {
716 			/* use default config */
717 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
718 			    " rxdma-cfg property:"
719 			    " bad custom config:"
720 			    " use default"));
721 			for (port = 0; port < num_ports; port++) {
722 				custom_num_rdc[port] =
723 				    (num_ports == 4) ?
724 				    p4_rx_fair[port] :
725 				    p2_rx_fair[port];
726 				custom_start_rdc[port] = start_rdc;
727 				start_rdc += custom_num_rdc[port];
728 			}
729 		}
730 		break;
731 
732 	default:
733 		/* use default config */
734 		cfg_prop = "fair";
735 		for (port = 0; port < num_ports; port++) {
736 			custom_num_rdc[port] = (num_ports == 4) ?
737 			    p4_rx_fair[port] : p2_rx_fair[port];
738 			custom_start_rdc[port] = start_rdc;
739 			start_rdc += custom_num_rdc[port];
740 		}
741 		break;
742 	}
743 
744 	/* Now Update the rx properties */
745 	for (port = 0; port < num_ports; port++) {
746 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
747 		    " update property rxdma-cfg with %s ", cfg_prop));
748 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
749 		    "rxdma-cfg", cfg_prop);
750 		if (ddi_status != DDI_PROP_SUCCESS) {
751 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
752 			    " property rxdma-cfg is not updating to %s",
753 			    cfg_prop));
754 			status |= NXGE_DDI_FAILED;
755 		}
756 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
757 		    num_rdc_prop, custom_num_rdc[port]));
758 
759 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
760 		    num_rdc_prop, custom_num_rdc[port]);
761 
762 		if (ddi_status != DDI_PROP_SUCCESS) {
763 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
764 			    " property %s not updating with %d",
765 			    num_rdc_prop, custom_num_rdc[port]));
766 			status |= NXGE_DDI_FAILED;
767 		}
768 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
769 		    start_rdc_prop, custom_start_rdc[port]));
770 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
771 		    start_rdc_prop, custom_start_rdc[port]);
772 
773 		if (ddi_status != DDI_PROP_SUCCESS) {
774 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
775 			    " property %s not updating with %d ",
776 			    start_rdc_prop, custom_start_rdc[port]));
777 			status |= NXGE_DDI_FAILED;
778 		}
779 	}
780 	if (status & NXGE_DDI_FAILED)
781 		status |= NXGE_ERROR;
782 	return (status);
783 }
784 
785 static nxge_status_t
nxge_update_txdma_properties(p_nxge_t nxgep,config_token_t token,dev_info_t * s_dip[])786 nxge_update_txdma_properties(p_nxge_t nxgep, config_token_t token,
787 	dev_info_t *s_dip[])
788 {
789 	nxge_status_t status = NXGE_OK;
790 	int ddi_status = DDI_SUCCESS;
791 	int num_ports = nxgep->nports;
792 	int port, bits, j;
793 	uint8_t  start_tdc, num_tdc = 0;
794 	p_nxge_param_t param_arr;
795 	uint32_t tdc_bitmap[MAX_SIBLINGS];
796 	int custom_start_tdc[MAX_SIBLINGS];
797 	int custom_num_tdc[MAX_SIBLINGS];
798 	uint8_t bad_config = B_FALSE;
799 	int *prop_val;
800 	uint_t prop_len;
801 	char *start_tdc_prop, *num_tdc_prop, *cfg_prop;
802 
803 	start_tdc = 0;
804 	param_arr = nxgep->param_arr;
805 	start_tdc_prop = param_arr[param_txdma_channels_begin].fcode_name;
806 	num_tdc_prop = param_arr[param_txdma_channels].fcode_name;
807 
808 	switch (token) {
809 	case FAIR:
810 		cfg_prop = "fair";
811 		for (port = 0; port < num_ports; port++) {
812 			custom_num_tdc[port] = (num_ports == 4) ?
813 			    p4_tx_fair[port] : p2_tx_fair[port];
814 			custom_start_tdc[port] = start_tdc;
815 			start_tdc += custom_num_tdc[port];
816 		}
817 		break;
818 
819 	case EQUAL:
820 		cfg_prop = "equal";
821 		for (port = 0; port < num_ports; port++) {
822 			custom_num_tdc[port] = (num_ports == 4) ?
823 			    p4_tx_equal[port] : p2_tx_equal[port];
824 			custom_start_tdc[port] = start_tdc;
825 			start_tdc += custom_num_tdc[port];
826 		}
827 		break;
828 
829 	case CUSTOM:
830 		cfg_prop = "custom";
831 		/* See if it is good config */
832 		num_tdc = 0;
833 		for (port = 0; port < num_ports; port++) {
834 			ddi_status = ddi_prop_lookup_int_array(
835 			    DDI_DEV_T_ANY, s_dip[port], 0, start_tdc_prop,
836 			    &prop_val, &prop_len);
837 			if (ddi_status == DDI_SUCCESS)
838 				custom_start_tdc[port] = *prop_val;
839 			else {
840 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
841 				    " %s custom start port %d"
842 				    " read failed ", " txdma-cfg", port));
843 				bad_config = B_TRUE;
844 				status |= NXGE_DDI_FAILED;
845 			}
846 
847 			if ((custom_start_tdc[port] == -1) ||
848 			    (custom_start_tdc[port] >=
849 			    NXGE_MAX_RDCS)) {
850 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
851 				    " %s custom start %d"
852 				    " out of range %x ", " txdma-cfg",
853 				    port, custom_start_tdc[port]));
854 				bad_config = B_TRUE;
855 				break;
856 			}
857 
858 			ddi_status = ddi_prop_lookup_int_array(
859 			    DDI_DEV_T_ANY, s_dip[port], 0, num_tdc_prop,
860 			    &prop_val, &prop_len);
861 			if (ddi_status == DDI_SUCCESS)
862 				custom_num_tdc[port] = *prop_val;
863 			else {
864 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
865 				    " %s custom num port %d"
866 				    " read failed ", " txdma-cfg", port));
867 				bad_config = B_TRUE;
868 				status |= NXGE_DDI_FAILED;
869 			}
870 
871 			if ((custom_num_tdc[port] == -1) ||
872 			    (custom_num_tdc[port] >
873 			    NXGE_MAX_TDCS) ||
874 			    ((custom_num_tdc[port] +
875 			    custom_start_tdc[port]) >
876 			    NXGE_MAX_TDCS)) {
877 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
878 				    " %s custom num %d"
879 				    " out of range %x ", " rxdma-cfg",
880 				    port, custom_num_tdc[port]));
881 				bad_config = B_TRUE;
882 				break;
883 			}
884 			num_tdc += custom_num_tdc[port];
885 			if (num_tdc > NXGE_MAX_TDCS) {
886 				bad_config = B_TRUE;
887 				break;
888 			}
889 			tdc_bitmap[port] = 0;
890 			for (bits = 0;
891 			    bits < custom_num_tdc[port]; bits++) {
892 				tdc_bitmap[port] |=
893 				    (1 <<
894 				    (bits + custom_start_tdc[port]));
895 			}
896 
897 		}
898 
899 		if (bad_config == B_FALSE) {
900 			/* check for overlap */
901 			for (port = 0; port < num_ports - 1; port++) {
902 				for (j = port + 1; j < num_ports; j++) {
903 					if (tdc_bitmap[port] &
904 					    tdc_bitmap[j]) {
905 						NXGE_DEBUG_MSG((nxgep, CFG_CTL,
906 						    " rxdma-cfg"
907 						    " property custom"
908 						    " bit overlap"
909 						    " %d %d ",
910 						    port, j));
911 						bad_config = B_TRUE;
912 						break;
913 					}
914 				}
915 				if (bad_config == B_TRUE)
916 					break;
917 			}
918 		}
919 		if (bad_config == B_TRUE) {
920 			/* use default config */
921 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
922 			    " txdma-cfg property:"
923 			    " bad custom config:" " use default"));
924 
925 			for (port = 0; port < num_ports; port++) {
926 				custom_num_tdc[port] = (num_ports == 4) ?
927 				    p4_tx_fair[port] : p2_tx_fair[port];
928 				custom_start_tdc[port] = start_tdc;
929 				start_tdc += custom_num_tdc[port];
930 			}
931 		}
932 		break;
933 
934 	default:
935 		/* use default config */
936 		cfg_prop = "fair";
937 		for (port = 0; port < num_ports; port++) {
938 			custom_num_tdc[port] = (num_ports == 4) ?
939 			    p4_tx_fair[port] : p2_tx_fair[port];
940 			custom_start_tdc[port] = start_tdc;
941 			start_tdc += custom_num_tdc[port];
942 		}
943 		break;
944 	}
945 
946 	/* Now Update the tx properties */
947 	for (port = 0; port < num_ports; port++) {
948 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
949 		    " update property txdma-cfg with %s ", cfg_prop));
950 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
951 		    "txdma-cfg", cfg_prop);
952 		if (ddi_status != DDI_PROP_SUCCESS) {
953 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
954 			    " property txdma-cfg is not updating to %s",
955 			    cfg_prop));
956 			status |= NXGE_DDI_FAILED;
957 		}
958 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
959 		    num_tdc_prop, custom_num_tdc[port]));
960 
961 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
962 		    num_tdc_prop, custom_num_tdc[port]);
963 
964 		if (ddi_status != DDI_PROP_SUCCESS) {
965 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
966 			    " property %s not updating with %d",
967 			    num_tdc_prop,
968 			    custom_num_tdc[port]));
969 			status |= NXGE_DDI_FAILED;
970 		}
971 
972 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
973 		    start_tdc_prop, custom_start_tdc[port]));
974 
975 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
976 		    start_tdc_prop, custom_start_tdc[port]);
977 		if (ddi_status != DDI_PROP_SUCCESS) {
978 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
979 			    " property %s not updating with %d ",
980 			    start_tdc_prop, custom_start_tdc[port]));
981 			status |= NXGE_DDI_FAILED;
982 		}
983 	}
984 	if (status & NXGE_DDI_FAILED)
985 		status |= NXGE_ERROR;
986 	return (status);
987 }
988 
989 static nxge_status_t
nxge_update_cfg_properties(p_nxge_t nxgep,uint32_t flags,config_token_t token,dev_info_t * s_dip[])990 nxge_update_cfg_properties(p_nxge_t nxgep, uint32_t flags,
991 	config_token_t token, dev_info_t *s_dip[])
992 {
993 	nxge_status_t status = NXGE_OK;
994 
995 	switch (flags) {
996 	case COMMON_TXDMA_CFG:
997 		if (nxge_dma_obp_props_only == 0)
998 			status = nxge_update_txdma_properties(nxgep,
999 			    token, s_dip);
1000 		break;
1001 	case COMMON_RXDMA_CFG:
1002 		if (nxge_dma_obp_props_only == 0)
1003 			status = nxge_update_rxdma_properties(nxgep,
1004 			    token, s_dip);
1005 
1006 		break;
1007 	case COMMON_RXDMA_GRP_CFG:
1008 		status = nxge_update_rxdma_grp_properties(nxgep,
1009 		    token, s_dip);
1010 		break;
1011 	default:
1012 		return (NXGE_ERROR);
1013 	}
1014 	return (status);
1015 }
1016 
1017 /*
1018  * verify consistence.
1019  * (May require publishing the properties on all the ports.
1020  *
1021  * What if properties are published on function 0 device only?
1022  *
1023  *
1024  * rxdma-cfg, txdma-cfg, rxdma-grp-cfg (required )
1025  * What about class configs?
1026  *
1027  * If consistent, update the property on all the siblings.
1028  * set  a flag on hardware shared register
1029  * The rest of the siblings will check the flag
1030  * if the flag is set, they will use the updated property
1031  * without doing any validation.
1032  */
1033 
1034 nxge_status_t
nxge_cfg_verify_set_classify_prop(p_nxge_t nxgep,char * prop,uint64_t known_cfg,uint32_t override,dev_info_t * c_dip[])1035 nxge_cfg_verify_set_classify_prop(p_nxge_t nxgep, char *prop,
1036 	uint64_t known_cfg, uint32_t override, dev_info_t *c_dip[])
1037 {
1038 	nxge_status_t status = NXGE_OK;
1039 	int ddi_status = DDI_SUCCESS;
1040 	int i = 0, found = 0, update_prop = B_TRUE;
1041 	int *cfg_val;
1042 	uint_t new_value, cfg_value[MAX_SIBLINGS];
1043 	uint_t prop_len;
1044 	uint_t known_cfg_value;
1045 
1046 	new_value = 0;
1047 	known_cfg_value = (uint_t)known_cfg;
1048 
1049 	if (override == B_TRUE) {
1050 		new_value = known_cfg_value;
1051 		for (i = 0; i < nxgep->nports; i++) {
1052 			ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE,
1053 			    c_dip[i], prop, new_value);
1054 #ifdef NXGE_DEBUG_ERROR
1055 			if (ddi_status != DDI_PROP_SUCCESS)
1056 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1057 				    " property %s failed update ", prop));
1058 #endif
1059 		}
1060 		if (ddi_status != DDI_PROP_SUCCESS)
1061 			return (NXGE_ERROR | NXGE_DDI_FAILED);
1062 	}
1063 	for (i = 0; i < nxgep->nports; i++) {
1064 		cfg_value[i] = known_cfg_value;
1065 		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, c_dip[i], 0,
1066 		    prop, &cfg_val,
1067 		    &prop_len) == DDI_PROP_SUCCESS) {
1068 			cfg_value[i] = *cfg_val;
1069 			ddi_prop_free(cfg_val);
1070 			found++;
1071 		}
1072 	}
1073 
1074 	if (found != i) {
1075 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1076 		    " property %s not specified on all ports", prop));
1077 		if (found == 0) {
1078 			/* not specified: Use default */
1079 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1080 			    " property %s not specified on any port:"
1081 			    " Using default", prop));
1082 			new_value = known_cfg_value;
1083 		} else {
1084 			/* specified on some */
1085 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1086 			    " property %s not specified"
1087 			    " on some ports: Using default", prop));
1088 			/* ? use p0 value instead ? */
1089 			new_value = known_cfg_value;
1090 		}
1091 	} else {
1092 		/* check type and consistence */
1093 		/* found on all devices */
1094 		for (i = 1; i < found; i++) {
1095 			if (cfg_value[i] != cfg_value[i - 1]) {
1096 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1097 				    " property %s inconsistent:"
1098 				    " Using default", prop));
1099 				new_value = known_cfg_value;
1100 				break;
1101 			}
1102 			/*
1103 			 * Found on all the ports and consistent. Nothing to
1104 			 * do.
1105 			 */
1106 			update_prop = B_FALSE;
1107 		}
1108 	}
1109 
1110 	if (update_prop == B_TRUE) {
1111 		for (i = 0; i < nxgep->nports; i++) {
1112 			ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE,
1113 			    c_dip[i], prop, new_value);
1114 #ifdef NXGE_DEBUG_ERROR
1115 			if (ddi_status != DDI_SUCCESS)
1116 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1117 				    " property %s not updating with %d"
1118 				    " Using default",
1119 				    prop, new_value));
1120 #endif
1121 			if (ddi_status != DDI_PROP_SUCCESS)
1122 				status |= NXGE_DDI_FAILED;
1123 		}
1124 	}
1125 	if (status & NXGE_DDI_FAILED)
1126 		status |= NXGE_ERROR;
1127 
1128 	return (status);
1129 }
1130 
1131 static uint64_t
nxge_class_get_known_cfg(p_nxge_t nxgep,int class_prop,int rx_quick_cfg)1132 nxge_class_get_known_cfg(p_nxge_t nxgep, int class_prop, int rx_quick_cfg)
1133 {
1134 	int start_prop;
1135 	uint64_t cfg_value;
1136 	p_nxge_param_t param_arr;
1137 
1138 	param_arr = nxgep->param_arr;
1139 	cfg_value = param_arr[class_prop].value;
1140 	start_prop = param_h1_init_value;
1141 
1142 	/* update the properties per quick config */
1143 	switch (rx_quick_cfg) {
1144 	case CFG_L3_WEB:
1145 	case CFG_L3_DISTRIBUTE:
1146 		cfg_value = nxge_classify_get_cfg_value(nxgep,
1147 		    rx_quick_cfg, class_prop - start_prop);
1148 		break;
1149 	default:
1150 		cfg_value = param_arr[class_prop].value;
1151 		break;
1152 	}
1153 	return (cfg_value);
1154 }
1155 
1156 static nxge_status_t
nxge_cfg_verify_set_classify(p_nxge_t nxgep,dev_info_t * c_dip[])1157 nxge_cfg_verify_set_classify(p_nxge_t nxgep, dev_info_t *c_dip[])
1158 {
1159 	nxge_status_t status = NXGE_OK;
1160 	int rx_quick_cfg, class_prop, start_prop, end_prop;
1161 	char *prop_name;
1162 	int override = B_TRUE;
1163 	uint64_t cfg_value;
1164 	p_nxge_param_t param_arr;
1165 
1166 	param_arr = nxgep->param_arr;
1167 	rx_quick_cfg = param_arr[param_rx_quick_cfg].value;
1168 	start_prop = param_h1_init_value;
1169 	end_prop = param_class_opt_ipv6_sctp;
1170 
1171 	/* update the properties per quick config */
1172 	if (rx_quick_cfg == CFG_NOT_SPECIFIED)
1173 		override = B_FALSE;
1174 
1175 	/*
1176 	 * these parameter affect the classification outcome.
1177 	 * these parameters are used to configure the Flow key and
1178 	 * the TCAM key for each of the IP classes.
1179 	 * Included here are also the H1 and H2 initial values
1180 	 * which affect the distribution as well as final hash value
1181 	 * (hence the offset into RDC table and FCRAM bucket location)
1182 	 *
1183 	 */
1184 	for (class_prop = start_prop; class_prop <= end_prop; class_prop++) {
1185 		prop_name = param_arr[class_prop].fcode_name;
1186 		cfg_value = nxge_class_get_known_cfg(nxgep,
1187 		    class_prop, rx_quick_cfg);
1188 		status = nxge_cfg_verify_set_classify_prop(nxgep, prop_name,
1189 		    cfg_value, override, c_dip);
1190 	}
1191 
1192 	/*
1193 	 * these properties do not affect the actual classification outcome.
1194 	 * used to enable/disable or tune the fflp hardware
1195 	 *
1196 	 * fcram_access_ratio, tcam_access_ratio, tcam_enable, llc_snap_enable
1197 	 *
1198 	 */
1199 	override = B_FALSE;
1200 	for (class_prop = param_fcram_access_ratio;
1201 	    class_prop <= param_llc_snap_enable; class_prop++) {
1202 		prop_name = param_arr[class_prop].fcode_name;
1203 		cfg_value = param_arr[class_prop].value;
1204 		status = nxge_cfg_verify_set_classify_prop(nxgep, prop_name,
1205 		    cfg_value, override, c_dip);
1206 	}
1207 
1208 	return (status);
1209 }
1210 
1211 nxge_status_t
nxge_cfg_verify_set(p_nxge_t nxgep,uint32_t flag)1212 nxge_cfg_verify_set(p_nxge_t nxgep, uint32_t flag)
1213 {
1214 	nxge_status_t status = NXGE_OK;
1215 	int i = 0, found = 0;
1216 	int num_siblings;
1217 	dev_info_t *c_dip[MAX_SIBLINGS + 1];
1218 	char *prop_val[MAX_SIBLINGS];
1219 	config_token_t c_token[MAX_SIBLINGS];
1220 	char *prop;
1221 
1222 	if (nxge_dma_obp_props_only)
1223 		return (NXGE_OK);
1224 
1225 	num_siblings = 0;
1226 	c_dip[num_siblings] = ddi_get_child(nxgep->p_dip);
1227 	while (c_dip[num_siblings]) {
1228 		c_dip[num_siblings + 1] =
1229 		    ddi_get_next_sibling(c_dip[num_siblings]);
1230 		num_siblings++;
1231 	}
1232 
1233 	switch (flag) {
1234 	case COMMON_TXDMA_CFG:
1235 		prop = "txdma-cfg";
1236 		break;
1237 	case COMMON_RXDMA_CFG:
1238 		prop = "rxdma-cfg";
1239 		break;
1240 	case COMMON_RXDMA_GRP_CFG:
1241 		prop = "rxdma-grp-cfg";
1242 		break;
1243 	case COMMON_CLASS_CFG:
1244 		status = nxge_cfg_verify_set_classify(nxgep, c_dip);
1245 		return (status);
1246 	default:
1247 		return (NXGE_ERROR);
1248 	}
1249 
1250 	i = 0;
1251 	while (i < num_siblings) {
1252 		if (ddi_prop_lookup_string(DDI_DEV_T_ANY, c_dip[i], 0, prop,
1253 		    (char **)&prop_val[i]) == DDI_PROP_SUCCESS) {
1254 			c_token[i] = nxge_get_config_token(prop_val[i]);
1255 			ddi_prop_free(prop_val[i]);
1256 			found++;
1257 		} else
1258 			c_token[i] = CONFIG_TOKEN_NONE;
1259 		i++;
1260 	}
1261 
1262 	if (found != i) {
1263 		if (found == 0) {
1264 			/* not specified: Use default */
1265 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1266 			    " property %s not specified on any port:"
1267 			    " Using default", prop));
1268 
1269 			status = nxge_update_cfg_properties(nxgep,
1270 			    flag, FAIR, c_dip);
1271 			return (status);
1272 		} else {
1273 			/*
1274 			 * if  the convention is to use function 0 device then
1275 			 * populate the other devices with this configuration.
1276 			 *
1277 			 * The other alternative is to use the default config.
1278 			 */
1279 			/* not specified: Use default */
1280 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1281 			    " property %s not specified on some ports:"
1282 			    " Using default", prop));
1283 			status = nxge_update_cfg_properties(nxgep,
1284 			    flag, FAIR, c_dip);
1285 			return (status);
1286 		}
1287 	}
1288 
1289 	/* check type and consistence */
1290 	/* found on all devices */
1291 	for (i = 1; i < found; i++) {
1292 		if (c_token[i] != c_token[i - 1]) {
1293 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1294 			    " property %s inconsistent:"
1295 			    " Using default", prop));
1296 			status = nxge_update_cfg_properties(nxgep,
1297 			    flag, FAIR, c_dip);
1298 			return (status);
1299 		}
1300 	}
1301 
1302 	/*
1303 	 * Found on all the ports check if it is custom configuration. if
1304 	 * custom, then verify consistence
1305 	 *
1306 	 * finally create soft properties
1307 	 */
1308 	status = nxge_update_cfg_properties(nxgep, flag, c_token[0], c_dip);
1309 	return (status);
1310 }
1311 
1312 nxge_status_t
nxge_cfg_verify_set_quick_config(p_nxge_t nxgep)1313 nxge_cfg_verify_set_quick_config(p_nxge_t nxgep)
1314 {
1315 	nxge_status_t status = NXGE_OK;
1316 	int ddi_status = DDI_SUCCESS;
1317 	char *prop_val;
1318 	char *rx_prop;
1319 	char *prop;
1320 	uint32_t cfg_value = CFG_NOT_SPECIFIED;
1321 	p_nxge_param_t param_arr;
1322 
1323 	param_arr = nxgep->param_arr;
1324 	rx_prop = param_arr[param_rx_quick_cfg].fcode_name;
1325 
1326 	prop = "rx-quick-cfg";
1327 
1328 	/*
1329 	 * good value are
1330 	 *
1331 	 * "web-server" "generic-server" "l3-classify" "flow-classify"
1332 	 */
1333 	if (ddi_prop_lookup_string(DDI_DEV_T_ANY, nxgep->dip, 0,
1334 	    prop, (char **)&prop_val) != DDI_PROP_SUCCESS) {
1335 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1336 		    " property %s not specified: using default ", prop));
1337 		cfg_value = CFG_NOT_SPECIFIED;
1338 	} else {
1339 		cfg_value = CFG_L3_DISTRIBUTE;
1340 		if (strncmp("web-server", (caddr_t)prop_val, 8) == 0) {
1341 			cfg_value = CFG_L3_WEB;
1342 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1343 			    " %s: web server ", prop));
1344 		}
1345 		if (strncmp("generic-server", (caddr_t)prop_val, 8) == 0) {
1346 			cfg_value = CFG_L3_DISTRIBUTE;
1347 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1348 			    " %s: distribute ", prop));
1349 		}
1350 		/* more */
1351 		ddi_prop_free(prop_val);
1352 	}
1353 
1354 	ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
1355 	    rx_prop, cfg_value);
1356 	if (ddi_status != DDI_PROP_SUCCESS)
1357 		status |= NXGE_DDI_FAILED;
1358 
1359 	/* now handle specified cases: */
1360 	if (status & NXGE_DDI_FAILED)
1361 		status |= NXGE_ERROR;
1362 	return (status);
1363 }
1364 
1365 /*
1366  * Device properties adv-autoneg-cap etc are defined by FWARC
1367  * http://sac.sfbay/FWARC/2002/345/20020610_asif.haswarey
1368  */
1369 static void
nxge_use_cfg_link_cfg(p_nxge_t nxgep)1370 nxge_use_cfg_link_cfg(p_nxge_t nxgep)
1371 {
1372 	int *prop_val;
1373 	uint_t prop_len;
1374 	dev_info_t *dip;
1375 	int speed;
1376 	int duplex;
1377 	int adv_autoneg_cap;
1378 	int adv_10gfdx_cap;
1379 	int adv_10ghdx_cap;
1380 	int adv_1000fdx_cap;
1381 	int adv_1000hdx_cap;
1382 	int adv_100fdx_cap;
1383 	int adv_100hdx_cap;
1384 	int adv_10fdx_cap;
1385 	int adv_10hdx_cap;
1386 	int status = DDI_SUCCESS;
1387 
1388 	dip = nxgep->dip;
1389 
1390 	/*
1391 	 * first find out the card type and the supported link speeds and
1392 	 * features
1393 	 */
1394 	/* add code for card type */
1395 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-autoneg-cap",
1396 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1397 		ddi_prop_free(prop_val);
1398 		return;
1399 	}
1400 
1401 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10gfdx-cap",
1402 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1403 		ddi_prop_free(prop_val);
1404 		return;
1405 	}
1406 
1407 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-1000hdx-cap",
1408 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1409 		ddi_prop_free(prop_val);
1410 		return;
1411 	}
1412 
1413 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-1000fdx-cap",
1414 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1415 		ddi_prop_free(prop_val);
1416 		return;
1417 	}
1418 
1419 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-100fdx-cap",
1420 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1421 		ddi_prop_free(prop_val);
1422 		return;
1423 	}
1424 
1425 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-100hdx-cap",
1426 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1427 		ddi_prop_free(prop_val);
1428 		return;
1429 	}
1430 
1431 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10fdx-cap",
1432 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1433 		ddi_prop_free(prop_val);
1434 		return;
1435 	}
1436 
1437 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10hdx-cap",
1438 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1439 		ddi_prop_free(prop_val);
1440 		return;
1441 	}
1442 
1443 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0, "speed",
1444 	    (uchar_t **)&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1445 		if (strncmp("10000", (caddr_t)prop_val,
1446 		    (size_t)prop_len) == 0) {
1447 			speed = 10000;
1448 		} else if (strncmp("1000", (caddr_t)prop_val,
1449 		    (size_t)prop_len) == 0) {
1450 			speed = 1000;
1451 		} else if (strncmp("100", (caddr_t)prop_val,
1452 		    (size_t)prop_len) == 0) {
1453 			speed = 100;
1454 		} else if (strncmp("10", (caddr_t)prop_val,
1455 		    (size_t)prop_len) == 0) {
1456 			speed = 10;
1457 		} else if (strncmp("auto", (caddr_t)prop_val,
1458 		    (size_t)prop_len) == 0) {
1459 			speed = 0;
1460 		} else {
1461 			NXGE_ERROR_MSG((nxgep, NXGE_NOTE,
1462 			    "speed property is invalid reverting to auto"));
1463 			speed = 0;
1464 		}
1465 		ddi_prop_free(prop_val);
1466 	} else
1467 		speed = 0;
1468 
1469 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0, "duplex",
1470 	    (uchar_t **)&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1471 		if (strncmp("full", (caddr_t)prop_val,
1472 		    (size_t)prop_len) == 0) {
1473 			duplex = 2;
1474 		} else if (strncmp("half", (caddr_t)prop_val,
1475 		    (size_t)prop_len) == 0) {
1476 			duplex = 1;
1477 		} else if (strncmp("auto", (caddr_t)prop_val,
1478 		    (size_t)prop_len) == 0) {
1479 			duplex = 0;
1480 		} else {
1481 			NXGE_ERROR_MSG((nxgep, NXGE_NOTE,
1482 			    "duplex property is invalid"
1483 			    " reverting to auto"));
1484 			duplex = 0;
1485 		}
1486 		ddi_prop_free(prop_val);
1487 	} else
1488 		duplex = 0;
1489 
1490 	/* speed == 0 or duplex == 0 means auto negotiation. */
1491 	adv_autoneg_cap = (speed == 0) || (duplex == 0);
1492 	if (adv_autoneg_cap == 0) {
1493 		adv_10gfdx_cap = ((speed == 10000) && (duplex == 2));
1494 		adv_10ghdx_cap = adv_10gfdx_cap;
1495 		adv_10ghdx_cap |= ((speed == 10000) && (duplex == 1));
1496 		adv_1000fdx_cap = adv_10ghdx_cap;
1497 		adv_1000fdx_cap |= ((speed == 1000) && (duplex == 2));
1498 		adv_1000hdx_cap = adv_1000fdx_cap;
1499 		adv_1000hdx_cap |= ((speed == 1000) && (duplex == 1));
1500 		adv_100fdx_cap = adv_1000hdx_cap;
1501 		adv_100fdx_cap |= ((speed == 100) && (duplex == 2));
1502 		adv_100hdx_cap = adv_100fdx_cap;
1503 		adv_100hdx_cap |= ((speed == 100) && (duplex == 1));
1504 		adv_10fdx_cap = adv_100hdx_cap;
1505 		adv_10fdx_cap |= ((speed == 10) && (duplex == 2));
1506 		adv_10hdx_cap = adv_10fdx_cap;
1507 		adv_10hdx_cap |= ((speed == 10) && (duplex == 1));
1508 	} else if (speed == 0) {
1509 		adv_10gfdx_cap = (duplex == 2);
1510 		adv_10ghdx_cap = (duplex == 1);
1511 		adv_1000fdx_cap = (duplex == 2);
1512 		adv_1000hdx_cap = (duplex == 1);
1513 		adv_100fdx_cap = (duplex == 2);
1514 		adv_100hdx_cap = (duplex == 1);
1515 		adv_10fdx_cap = (duplex == 2);
1516 		adv_10hdx_cap = (duplex == 1);
1517 	}
1518 	if (duplex == 0) {
1519 		adv_10gfdx_cap = (speed == 0);
1520 		adv_10gfdx_cap |= (speed == 10000);
1521 		adv_10ghdx_cap = adv_10gfdx_cap;
1522 		adv_10ghdx_cap |= (speed == 10000);
1523 		adv_1000fdx_cap = adv_10ghdx_cap;
1524 		adv_1000fdx_cap |= (speed == 1000);
1525 		adv_1000hdx_cap = adv_1000fdx_cap;
1526 		adv_1000hdx_cap |= (speed == 1000);
1527 		adv_100fdx_cap = adv_1000hdx_cap;
1528 		adv_100fdx_cap |= (speed == 100);
1529 		adv_100hdx_cap = adv_100fdx_cap;
1530 		adv_100hdx_cap |= (speed == 100);
1531 		adv_10fdx_cap = adv_100hdx_cap;
1532 		adv_10fdx_cap |= (speed == 10);
1533 		adv_10hdx_cap = adv_10fdx_cap;
1534 		adv_10hdx_cap |= (speed == 10);
1535 	}
1536 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1537 	    "adv-autoneg-cap", &adv_autoneg_cap, 1);
1538 	if (status)
1539 		return;
1540 
1541 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1542 	    "adv-10gfdx-cap", &adv_10gfdx_cap, 1);
1543 	if (status)
1544 		goto nxge_map_myargs_to_gmii_fail1;
1545 
1546 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1547 	    "adv-10ghdx-cap", &adv_10ghdx_cap, 1);
1548 	if (status)
1549 		goto nxge_map_myargs_to_gmii_fail2;
1550 
1551 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1552 	    "adv-1000fdx-cap", &adv_1000fdx_cap, 1);
1553 	if (status)
1554 		goto nxge_map_myargs_to_gmii_fail3;
1555 
1556 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1557 	    "adv-1000hdx-cap", &adv_1000hdx_cap, 1);
1558 	if (status)
1559 		goto nxge_map_myargs_to_gmii_fail4;
1560 
1561 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1562 	    "adv-100fdx-cap", &adv_100fdx_cap, 1);
1563 	if (status)
1564 		goto nxge_map_myargs_to_gmii_fail5;
1565 
1566 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1567 	    "adv-100hdx-cap", &adv_100hdx_cap, 1);
1568 	if (status)
1569 		goto nxge_map_myargs_to_gmii_fail6;
1570 
1571 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1572 	    "adv-10fdx-cap", &adv_10fdx_cap, 1);
1573 	if (status)
1574 		goto nxge_map_myargs_to_gmii_fail7;
1575 
1576 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1577 	    "adv-10hdx-cap", &adv_10hdx_cap, 1);
1578 	if (status)
1579 		goto nxge_map_myargs_to_gmii_fail8;
1580 
1581 	return;
1582 
1583 nxge_map_myargs_to_gmii_fail9:
1584 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10hdx-cap");
1585 
1586 nxge_map_myargs_to_gmii_fail8:
1587 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10fdx-cap");
1588 
1589 nxge_map_myargs_to_gmii_fail7:
1590 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-100hdx-cap");
1591 
1592 nxge_map_myargs_to_gmii_fail6:
1593 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-100fdx-cap");
1594 
1595 nxge_map_myargs_to_gmii_fail5:
1596 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-1000hdx-cap");
1597 
1598 nxge_map_myargs_to_gmii_fail4:
1599 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-1000fdx-cap");
1600 
1601 nxge_map_myargs_to_gmii_fail3:
1602 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10ghdx-cap");
1603 
1604 nxge_map_myargs_to_gmii_fail2:
1605 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10gfdx-cap");
1606 
1607 nxge_map_myargs_to_gmii_fail1:
1608 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-autoneg-cap");
1609 }
1610 
1611 nxge_status_t
nxge_get_config_properties(p_nxge_t nxgep)1612 nxge_get_config_properties(p_nxge_t nxgep)
1613 {
1614 	nxge_status_t status = NXGE_OK;
1615 	p_nxge_hw_list_t hw_p;
1616 	char **prop_val;
1617 	uint_t prop_len;
1618 	uint_t i;
1619 
1620 	NXGE_DEBUG_MSG((nxgep, VPD_CTL, " ==> nxge_get_config_properties"));
1621 
1622 	if ((hw_p = nxgep->nxge_hw_p) == NULL) {
1623 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1624 		    " nxge_get_config_properties:"
1625 		    " common hardware not set", nxgep->niu_type));
1626 		return (NXGE_ERROR);
1627 	}
1628 
1629 	/*
1630 	 * Get info on how many ports Neptune card has.
1631 	 */
1632 	nxgep->nports = nxge_get_nports(nxgep);
1633 	if (nxgep->nports <= 0) {
1634 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1635 		    "<==nxge_get_config_properties: Invalid Neptune type 0x%x",
1636 		    nxgep->niu_type));
1637 		return (NXGE_ERROR);
1638 	}
1639 	nxgep->classifier.tcam_size = TCAM_NIU_TCAM_MAX_ENTRY;
1640 	if (NXGE_IS_VALID_NEPTUNE_TYPE(nxgep)) {
1641 		nxgep->classifier.tcam_size = TCAM_NXGE_TCAM_MAX_ENTRY;
1642 	}
1643 	if (nxgep->function_num >= nxgep->nports) {
1644 		return (NXGE_ERROR);
1645 	}
1646 
1647 	status = nxge_get_mac_addr_properties(nxgep);
1648 	if (status != NXGE_OK)
1649 		return (NXGE_ERROR);
1650 
1651 	/*
1652 	 * read the configuration type. If none is specified, used default.
1653 	 * Config types: equal: (default) DMA channels, RDC groups, TCAM, FCRAM
1654 	 * are shared equally across all the ports.
1655 	 *
1656 	 * Fair: DMA channels, RDC groups, TCAM, FCRAM are shared proportional
1657 	 * to the port speed.
1658 	 *
1659 	 *
1660 	 * custom: DMA channels, RDC groups, TCAM, FCRAM partition is
1661 	 * specified in nxge.conf. Need to read each parameter and set
1662 	 * up the parameters in nxge structures.
1663 	 *
1664 	 */
1665 	switch (nxgep->niu_type) {
1666 	case N2_NIU:
1667 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1668 		    " ==> nxge_get_config_properties: N2"));
1669 		MUTEX_ENTER(&hw_p->nxge_cfg_lock);
1670 		if ((hw_p->flags & COMMON_CFG_VALID) !=
1671 		    COMMON_CFG_VALID) {
1672 			status = nxge_cfg_verify_set(nxgep,
1673 			    COMMON_RXDMA_GRP_CFG);
1674 			status = nxge_cfg_verify_set(nxgep,
1675 			    COMMON_CLASS_CFG);
1676 			hw_p->flags |= COMMON_CFG_VALID;
1677 		}
1678 		MUTEX_EXIT(&hw_p->nxge_cfg_lock);
1679 		status = nxge_use_cfg_n2niu_properties(nxgep);
1680 		break;
1681 	default:
1682 		if (!NXGE_IS_VALID_NEPTUNE_TYPE(nxgep)) {
1683 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1684 			    " nxge_get_config_properties:"
1685 			    " unknown NIU type 0x%x", nxgep->niu_type));
1686 			return (NXGE_ERROR);
1687 		}
1688 
1689 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1690 		    " ==> nxge_get_config_properties: Neptune"));
1691 		status = nxge_cfg_verify_set_quick_config(nxgep);
1692 		MUTEX_ENTER(&hw_p->nxge_cfg_lock);
1693 		if ((hw_p->flags & COMMON_CFG_VALID) !=
1694 		    COMMON_CFG_VALID) {
1695 			status = nxge_cfg_verify_set(nxgep,
1696 			    COMMON_TXDMA_CFG);
1697 			status = nxge_cfg_verify_set(nxgep,
1698 			    COMMON_RXDMA_CFG);
1699 			status = nxge_cfg_verify_set(nxgep,
1700 			    COMMON_RXDMA_GRP_CFG);
1701 			status = nxge_cfg_verify_set(nxgep,
1702 			    COMMON_CLASS_CFG);
1703 			hw_p->flags |= COMMON_CFG_VALID;
1704 		}
1705 		MUTEX_EXIT(&hw_p->nxge_cfg_lock);
1706 		nxge_use_cfg_neptune_properties(nxgep);
1707 		status = NXGE_OK;
1708 		break;
1709 	}
1710 
1711 	/*
1712 	 * Get the software LSO enable flag property from the
1713 	 * driver configuration file (nxge.conf).
1714 	 * This flag will be set to disable (0) if this property
1715 	 * does not exist.
1716 	 */
1717 	nxgep->soft_lso_enable = ddi_prop_get_int(DDI_DEV_T_ANY, nxgep->dip,
1718 	    DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "soft-lso-enable", 0);
1719 	NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1720 	    "nxge_get_config_properties: software lso %d\n",
1721 	    nxgep->soft_lso_enable));
1722 
1723 	nxgep->niu_hw_type = NIU_HW_TYPE_DEFAULT;
1724 	if (nxgep->niu_type == N2_NIU) {
1725 
1726 		uchar_t *s_prop_val;
1727 
1728 		/*
1729 		 * For NIU, the next generation KT has
1730 		 * a few differences in features that the
1731 		 * driver needs to handle them
1732 		 * accordingly.
1733 		 */
1734 		if (ddi_prop_lookup_string_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1735 		    "compatible", &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1736 			for (i = 0; i < prop_len; i++) {
1737 				if ((strcmp((caddr_t)prop_val[i],
1738 				    KT_NIU_COMPATIBLE) == 0)) {
1739 					nxgep->niu_hw_type = NIU_HW_TYPE_RF;
1740 					NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1741 					    "NIU type %d", nxgep->niu_hw_type));
1742 					break;
1743 				}
1744 			}
1745 		}
1746 
1747 		ddi_prop_free(prop_val);
1748 		/*
1749 		 * Some Serdes and PHY properties may also be provided as OBP
1750 		 * properties
1751 		 */
1752 		if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1753 		    "tx-cfg-l", &s_prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1754 			nxgep->srds_prop.tx_cfg_l =
1755 			    (uint16_t)(*(uint32_t *)s_prop_val);
1756 			NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1757 			    "nxge_get_config_properties: "
1758 			    "tx_cfg_l 0x%x, Read from OBP",
1759 			    nxgep->srds_prop.tx_cfg_l));
1760 			nxgep->srds_prop.prop_set |= NXGE_SRDS_TXCFGL;
1761 			ddi_prop_free(s_prop_val);
1762 		}
1763 		if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1764 		    "tx-cfg-h", &s_prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1765 			nxgep->srds_prop.tx_cfg_h =
1766 			    (uint16_t)(*(uint32_t *)s_prop_val);
1767 			NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1768 			    "nxge_get_config_properties: "
1769 			    "tx_cfg_h 0x%x, Read from OBP",
1770 			    nxgep->srds_prop.tx_cfg_h));
1771 			nxgep->srds_prop.prop_set |= NXGE_SRDS_TXCFGH;
1772 			ddi_prop_free(s_prop_val);
1773 		}
1774 		if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1775 		    "rx-cfg-l", &s_prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1776 			nxgep->srds_prop.rx_cfg_l =
1777 			    (uint16_t)(*(uint32_t *)s_prop_val);
1778 			NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1779 			    "nxge_get_config_properties: "
1780 			    "rx_cfg_l 0x%x, Read from OBP",
1781 			    nxgep->srds_prop.rx_cfg_l));
1782 			nxgep->srds_prop.prop_set |= NXGE_SRDS_RXCFGL;
1783 			ddi_prop_free(s_prop_val);
1784 		}
1785 		if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1786 		    "rx-cfg-h", &s_prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1787 			nxgep->srds_prop.rx_cfg_h =
1788 			    (uint16_t)(*(uint32_t *)s_prop_val);
1789 			NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1790 			    "nxge_get_config_properties: "
1791 			    "rx_cfg_h 0x%x, Read from OBP",
1792 			    nxgep->srds_prop.rx_cfg_h));
1793 			nxgep->srds_prop.prop_set |= NXGE_SRDS_RXCFGH;
1794 			ddi_prop_free(s_prop_val);
1795 		}
1796 		if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1797 		    "pll-cfg", &s_prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1798 			nxgep->srds_prop.pll_cfg_l =
1799 			    (uint16_t)(*(uint32_t *)s_prop_val);
1800 			NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1801 			    "nxge_get_config_properties: "
1802 			    "pll_cfg_l 0x%x, Read from OBP",
1803 			    nxgep->srds_prop.pll_cfg_l));
1804 			nxgep->srds_prop.prop_set |= NXGE_SRDS_PLLCFGL;
1805 			ddi_prop_free(s_prop_val);
1806 		}
1807 		if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1808 		    "phy-reg-values", &s_prop_val, &prop_len) ==
1809 		    DDI_PROP_SUCCESS) {
1810 
1811 			int tun_cnt, i;
1812 			uchar_t *arr = s_prop_val;
1813 
1814 			tun_cnt = prop_len / 6; /* 3 values, 2 bytes each */
1815 			nxgep->phy_prop.arr =
1816 			    KMEM_ZALLOC(sizeof (nxge_phy_mdio_val_t) * tun_cnt,
1817 			    KM_SLEEP);
1818 			nxgep->phy_prop.cnt = tun_cnt;
1819 			for (i = 0; i < tun_cnt; i++) {
1820 				nxgep->phy_prop.arr[i].dev = *(uint16_t *)arr;
1821 				arr += 2;
1822 				nxgep->phy_prop.arr[i].reg = *(uint16_t *)arr;
1823 				arr += 2;
1824 				nxgep->phy_prop.arr[i].val = *(uint16_t *)arr;
1825 				arr += 2;
1826 				NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1827 				    "nxge_get_config_properties: From OBP, "
1828 				    "read PHY <dev.reg.val> = "
1829 				    "<0x%x.0x%x.0x%x>",
1830 				    nxgep->phy_prop.arr[i].dev,
1831 				    nxgep->phy_prop.arr[i].reg,
1832 				    nxgep->phy_prop.arr[i].val));
1833 			}
1834 			ddi_prop_free(s_prop_val);
1835 		}
1836 	}
1837 
1838 	NXGE_DEBUG_MSG((nxgep, VPD_CTL, " <== nxge_get_config_properties"));
1839 	return (status);
1840 }
1841 
1842 static nxge_status_t
nxge_use_cfg_n2niu_properties(p_nxge_t nxgep)1843 nxge_use_cfg_n2niu_properties(p_nxge_t nxgep)
1844 {
1845 	nxge_status_t status = NXGE_OK;
1846 
1847 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_n2niu_properties"));
1848 
1849 	status = nxge_use_default_dma_config_n2(nxgep);
1850 	if (status != NXGE_OK) {
1851 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1852 		    " ==> nxge_use_cfg_n2niu_properties (err 0x%x)",
1853 		    status));
1854 		return (status | NXGE_ERROR);
1855 	}
1856 
1857 	(void) nxge_use_cfg_vlan_class_config(nxgep);
1858 	(void) nxge_use_cfg_mac_class_config(nxgep);
1859 	(void) nxge_use_cfg_class_config(nxgep);
1860 	(void) nxge_use_cfg_link_cfg(nxgep);
1861 
1862 	/*
1863 	 * Read in the hardware (fcode) properties. Use the ndd array to read
1864 	 * each property.
1865 	 */
1866 	(void) nxge_get_param_soft_properties(nxgep);
1867 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_n2niu_properties"));
1868 
1869 	return (status);
1870 }
1871 
1872 static void
nxge_use_cfg_neptune_properties(p_nxge_t nxgep)1873 nxge_use_cfg_neptune_properties(p_nxge_t nxgep)
1874 {
1875 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_neptune_properties"));
1876 
1877 	(void) nxge_use_cfg_dma_config(nxgep);
1878 	(void) nxge_use_cfg_vlan_class_config(nxgep);
1879 	(void) nxge_use_cfg_mac_class_config(nxgep);
1880 	(void) nxge_use_cfg_class_config(nxgep);
1881 	(void) nxge_use_cfg_link_cfg(nxgep);
1882 
1883 	/*
1884 	 * Read in the hardware (fcode) properties. Use the ndd array to read
1885 	 * each property.
1886 	 */
1887 	(void) nxge_get_param_soft_properties(nxgep);
1888 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_neptune_properties"));
1889 }
1890 
1891 /*
1892  * FWARC 2006/556 for N2 NIU.  Get the properties
1893  * from the prom.
1894  */
1895 static nxge_status_t
nxge_use_default_dma_config_n2(p_nxge_t nxgep)1896 nxge_use_default_dma_config_n2(p_nxge_t nxgep)
1897 {
1898 	int			ndmas;
1899 	uint8_t			func;
1900 	p_nxge_dma_pt_cfg_t	p_dma_cfgp;
1901 	p_nxge_hw_pt_cfg_t	p_cfgp;
1902 	int			*prop_val;
1903 	uint_t			prop_len;
1904 	int			i;
1905 	nxge_status_t		status = NXGE_OK;
1906 
1907 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2"));
1908 
1909 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
1910 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
1911 
1912 	func = nxgep->function_num;
1913 	p_cfgp->function_number = func;
1914 	ndmas = NXGE_TDMA_PER_NIU_PORT;
1915 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1916 	    "tx-dma-channels", (int **)&prop_val,
1917 	    &prop_len) == DDI_PROP_SUCCESS) {
1918 		if (prop_len != NXGE_NIU_TDMA_PROP_LEN) {
1919 			ddi_prop_free(prop_val);
1920 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1921 			    "==> nxge_use_default_dma_config_n2: "
1922 			    "invalid tx-dma-channels property for the NIU, "
1923 			    "using defaults"));
1924 			/*
1925 			 * Just failover to defaults
1926 			 */
1927 			p_cfgp->tdc.start = (func * NXGE_TDMA_PER_NIU_PORT);
1928 			ndmas = NXGE_TDMA_PER_NIU_PORT;
1929 		} else {
1930 			p_cfgp->tdc.start = prop_val[0];
1931 			NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1932 			    "==> nxge_use_default_dma_config_n2: tdc starts %d "
1933 			    "(#%d)", p_cfgp->tdc.start, prop_len));
1934 
1935 			ndmas = prop_val[1];
1936 			NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1937 			    "==> nxge_use_default_dma_config_n2: #tdc %d (#%d)",
1938 			    ndmas, prop_len));
1939 			ddi_prop_free(prop_val);
1940 		}
1941 	} else {
1942 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1943 		    "==> nxge_use_default_dma_config_n2: "
1944 		    "get tx-dma-channels failed"));
1945 		return (NXGE_DDI_FAILED);
1946 	}
1947 
1948 	p_cfgp->tdc.count = ndmas;
1949 	p_cfgp->tdc.owned = p_cfgp->tdc.count;
1950 
1951 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
1952 	    "p_cfgp 0x%llx max_tdcs %d start %d",
1953 	    p_cfgp, p_cfgp->tdc.count, p_cfgp->tdc.start));
1954 
1955 	/* Receive DMA */
1956 	ndmas = NXGE_RDMA_PER_NIU_PORT;
1957 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1958 	    "rx-dma-channels", (int **)&prop_val,
1959 	    &prop_len) == DDI_PROP_SUCCESS) {
1960 		if (prop_len != NXGE_NIU_RDMA_PROP_LEN) {
1961 			ddi_prop_free(prop_val);
1962 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1963 			    "==> nxge_use_default_dma_config_n2: "
1964 			    "invalid rx-dma-channels property for the NIU, "
1965 			    "using defaults"));
1966 			/*
1967 			 * Just failover to defaults
1968 			 */
1969 			p_cfgp->start_rdc = (func * NXGE_RDMA_PER_NIU_PORT);
1970 			ndmas = NXGE_RDMA_PER_NIU_PORT;
1971 		} else {
1972 			p_cfgp->start_rdc = prop_val[0];
1973 			NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1974 			    "==> nxge_use_default_dma_config_n2(obp):"
1975 			    " rdc start %d (#%d)",
1976 			    p_cfgp->start_rdc, prop_len));
1977 			ndmas = prop_val[1];
1978 			NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1979 			    "==> nxge_use_default_dma_config_n2(obp): "
1980 			    "#rdc %d (#%d)", ndmas, prop_len));
1981 			ddi_prop_free(prop_val);
1982 		}
1983 	} else {
1984 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1985 		    "==> nxge_use_default_dma_config_n2: "
1986 		    "get rx-dma-channel failed"));
1987 		return (NXGE_DDI_FAILED);
1988 	}
1989 
1990 	p_cfgp->max_rdcs = ndmas;
1991 	nxgep->rdc_mask = (ndmas - 1);
1992 
1993 	/* Hypervisor: rdc # and group # use the same # !! */
1994 	p_cfgp->max_grpids = p_cfgp->max_rdcs + p_cfgp->tdc.owned;
1995 	p_cfgp->mif_ldvid = p_cfgp->mac_ldvid = p_cfgp->ser_ldvid = 0;
1996 
1997 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1998 	    "interrupts", (int **)&prop_val,
1999 	    &prop_len) == DDI_PROP_SUCCESS) {
2000 		if ((prop_len != NXGE_NIU_0_INTR_PROP_LEN) &&
2001 		    (prop_len != NXGE_NIU_1_INTR_PROP_LEN)) {
2002 			ddi_prop_free(prop_val);
2003 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2004 			    "==> nxge_use_default_dma_config_n2: "
2005 			    "get interrupts failed"));
2006 			return (NXGE_DDI_FAILED);
2007 		}
2008 
2009 		/*
2010 		 * For each device assigned, the content of each interrupts
2011 		 * property is its logical device group.
2012 		 *
2013 		 * Assignment of interrupts property is in the the following
2014 		 * order:
2015 		 *
2016 		 * MAC MIF (if configured) SYSTEM ERROR (if configured) first
2017 		 * receive channel next channel...... last receive channel
2018 		 * first transmit channel next channel...... last transmit
2019 		 * channel
2020 		 *
2021 		 * prop_len should be at least for one mac and total # of rx and
2022 		 * tx channels. Function 0 owns MIF and ERROR
2023 		 */
2024 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
2025 		    "==> nxge_use_default_dma_config_n2(obp): "
2026 		    "# interrupts %d", prop_len));
2027 
2028 		switch (func) {
2029 		case 0:
2030 			p_cfgp->ldg_chn_start = 3;
2031 			p_cfgp->mac_ldvid = NXGE_MAC_LD_PORT0;
2032 			p_cfgp->mif_ldvid = NXGE_MIF_LD;
2033 			p_cfgp->ser_ldvid = NXGE_SYS_ERROR_LD;
2034 
2035 			break;
2036 		case 1:
2037 			p_cfgp->ldg_chn_start = 1;
2038 			p_cfgp->mac_ldvid = NXGE_MAC_LD_PORT1;
2039 
2040 			break;
2041 		default:
2042 			status = NXGE_DDI_FAILED;
2043 			break;
2044 		}
2045 
2046 		if (status != NXGE_OK)
2047 			return (status);
2048 
2049 		for (i = 0; i < prop_len; i++) {
2050 			p_cfgp->ldg[i] = prop_val[i];
2051 			NXGE_DEBUG_MSG((nxgep, OBP_CTL,
2052 			    "==> nxge_use_default_dma_config_n2(obp): "
2053 			    "F%d: interrupt #%d, ldg %d",
2054 			    nxgep->function_num, i, p_cfgp->ldg[i]));
2055 		}
2056 
2057 		p_cfgp->max_grpids = prop_len;
2058 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
2059 		    "==> nxge_use_default_dma_config_n2(obp): %d "
2060 		    "(#%d) maxgrpids %d channel starts %d",
2061 		    p_cfgp->mac_ldvid, i, p_cfgp->max_grpids,
2062 		    p_cfgp->ldg_chn_start));
2063 		ddi_prop_free(prop_val);
2064 	} else {
2065 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2066 		    "==> nxge_use_default_dma_config_n2: "
2067 		    "get interrupts failed"));
2068 		return (NXGE_DDI_FAILED);
2069 	}
2070 
2071 	p_cfgp->max_ldgs = p_cfgp->max_grpids;
2072 	NXGE_DEBUG_MSG((nxgep, OBP_CTL,
2073 	    "==> nxge_use_default_dma_config_n2: p_cfgp 0x%llx max_rdcs %d "
2074 	    "max_grpids %d macid %d mifid %d serrid %d",
2075 	    p_cfgp, p_cfgp->max_rdcs, p_cfgp->max_grpids,
2076 	    p_cfgp->mac_ldvid, p_cfgp->mif_ldvid, p_cfgp->ser_ldvid));
2077 
2078 
2079 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
2080 	    "p_cfgp p%p start_ldg %d nxgep->max_ldgs %d",
2081 	    p_cfgp, p_cfgp->start_ldg, p_cfgp->max_ldgs));
2082 
2083 	/*
2084 	 * RDC groups and the beginning RDC group assigned to this function.
2085 	 */
2086 	p_cfgp->max_rdc_grpids = NXGE_MAX_RDC_GROUPS / nxgep->nports;
2087 	p_cfgp->def_mac_rxdma_grpid =
2088 	    nxgep->function_num * NXGE_MAX_RDC_GROUPS / nxgep->nports;
2089 	p_cfgp->def_mac_txdma_grpid =
2090 	    nxgep->function_num * NXGE_MAX_TDC_GROUPS / nxgep->nports;
2091 
2092 	if ((p_cfgp->def_mac_rxdma_grpid = nxge_fzc_rdc_tbl_bind(nxgep,
2093 	    p_cfgp->def_mac_rxdma_grpid, B_TRUE)) >= NXGE_MAX_RDC_GRPS) {
2094 		NXGE_ERROR_MSG((nxgep, CFG_CTL,
2095 		    "nxge_use_default_dma_config_n2(): "
2096 		    "nxge_fzc_rdc_tbl_bind failed"));
2097 		return (NXGE_DDI_FAILED);
2098 	}
2099 
2100 	status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2101 	    "rx-rdc-grps", p_cfgp->max_rdc_grpids);
2102 	if (status) {
2103 		return (NXGE_DDI_FAILED);
2104 	}
2105 	status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2106 	    "rx-rdc-grps-begin", p_cfgp->def_mac_rxdma_grpid);
2107 	if (status) {
2108 		(void) ddi_prop_remove(DDI_DEV_T_NONE, nxgep->dip,
2109 		    "rx-rdc-grps");
2110 		return (NXGE_DDI_FAILED);
2111 	}
2112 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
2113 	    "p_cfgp $%p # rdc groups %d start rdc group id %d",
2114 	    p_cfgp, p_cfgp->max_rdc_grpids,
2115 	    p_cfgp->def_mac_rxdma_grpid));
2116 
2117 	nxgep->intr_timeout = NXGE_RDC_RCR_TIMEOUT;
2118 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
2119 	    "rxdma-intr-time", (int **)&prop_val, &prop_len) ==
2120 	    DDI_PROP_SUCCESS) {
2121 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
2122 			nxgep->intr_timeout = prop_val[0];
2123 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2124 			    nxgep->dip, "rxdma-intr-time", prop_val, prop_len);
2125 		}
2126 		ddi_prop_free(prop_val);
2127 	}
2128 
2129 	nxgep->intr_threshold = NXGE_RDC_RCR_THRESHOLD;
2130 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
2131 	    "rxdma-intr-pkts", (int **)&prop_val, &prop_len) ==
2132 	    DDI_PROP_SUCCESS) {
2133 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
2134 			nxgep->intr_threshold = prop_val[0];
2135 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2136 			    nxgep->dip, "rxdma-intr-pkts", prop_val, prop_len);
2137 		}
2138 		ddi_prop_free(prop_val);
2139 	}
2140 
2141 	nxge_set_hw_dma_config(nxgep);
2142 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "<== nxge_use_default_dma_config_n2"));
2143 	return (status);
2144 }
2145 
2146 static void
nxge_use_cfg_dma_config(p_nxge_t nxgep)2147 nxge_use_cfg_dma_config(p_nxge_t nxgep)
2148 {
2149 	int tx_ndmas, rx_ndmas, nrxgp, st_txdma, st_rxdma;
2150 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2151 	p_nxge_hw_pt_cfg_t p_cfgp;
2152 	dev_info_t *dip;
2153 	p_nxge_param_t param_arr;
2154 	char *prop;
2155 	int *prop_val;
2156 	uint_t prop_len;
2157 	int i;
2158 	uint8_t *ch_arr_p;
2159 
2160 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_dma_config"));
2161 	param_arr = nxgep->param_arr;
2162 
2163 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2164 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2165 	dip = nxgep->dip;
2166 	p_cfgp->function_number = nxgep->function_num;
2167 	prop = param_arr[param_txdma_channels_begin].fcode_name;
2168 
2169 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2170 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2171 		p_cfgp->tdc.start = *prop_val;
2172 		ddi_prop_free(prop_val);
2173 	} else {
2174 		switch (nxgep->niu_type) {
2175 		case NEPTUNE_4_1GC:
2176 			ch_arr_p = &tx_4_1G[0];
2177 			break;
2178 		case NEPTUNE_2_10GF:
2179 			ch_arr_p = &tx_2_10G[0];
2180 			break;
2181 		case NEPTUNE_2_10GF_2_1GC:
2182 		case NEPTUNE_2_10GF_2_1GRF:
2183 			ch_arr_p = &tx_2_10G_2_1G[0];
2184 			break;
2185 		case NEPTUNE_1_10GF_3_1GC:
2186 			ch_arr_p = &tx_1_10G_3_1G[0];
2187 			break;
2188 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2189 			ch_arr_p = &tx_1_1G_1_10G_2_1G[0];
2190 			break;
2191 		default:
2192 			switch (nxgep->platform_type) {
2193 			case P_NEPTUNE_ALONSO:
2194 				ch_arr_p = &tx_2_10G_2_1G[0];
2195 				break;
2196 			default:
2197 				ch_arr_p = &p4_tx_equal[0];
2198 				break;
2199 			}
2200 			break;
2201 		}
2202 		st_txdma = 0;
2203 		for (i = 0; i < nxgep->function_num; i++, ch_arr_p++)
2204 			st_txdma += *ch_arr_p;
2205 
2206 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2207 		    prop, st_txdma);
2208 		p_cfgp->tdc.start = st_txdma;
2209 	}
2210 
2211 	prop = param_arr[param_txdma_channels].fcode_name;
2212 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2213 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2214 		tx_ndmas = *prop_val;
2215 		ddi_prop_free(prop_val);
2216 	} else {
2217 		switch (nxgep->niu_type) {
2218 		case NEPTUNE_4_1GC:
2219 			tx_ndmas = tx_4_1G[nxgep->function_num];
2220 			break;
2221 		case NEPTUNE_2_10GF:
2222 			tx_ndmas = tx_2_10G[nxgep->function_num];
2223 			break;
2224 		case NEPTUNE_2_10GF_2_1GC:
2225 		case NEPTUNE_2_10GF_2_1GRF:
2226 			tx_ndmas = tx_2_10G_2_1G[nxgep->function_num];
2227 			break;
2228 		case NEPTUNE_1_10GF_3_1GC:
2229 			tx_ndmas = tx_1_10G_3_1G[nxgep->function_num];
2230 			break;
2231 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2232 			tx_ndmas = tx_1_1G_1_10G_2_1G[nxgep->function_num];
2233 			break;
2234 		default:
2235 			switch (nxgep->platform_type) {
2236 			case P_NEPTUNE_ALONSO:
2237 				tx_ndmas = tx_2_10G_2_1G[nxgep->function_num];
2238 				break;
2239 			default:
2240 				tx_ndmas = p4_tx_equal[nxgep->function_num];
2241 				break;
2242 			}
2243 			break;
2244 		}
2245 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2246 		    prop, tx_ndmas);
2247 	}
2248 
2249 	p_cfgp->tdc.count = tx_ndmas;
2250 	p_cfgp->tdc.owned = p_cfgp->tdc.count;
2251 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_dma_config: "
2252 	    "p_cfgp 0x%llx max_tdcs %d", p_cfgp, p_cfgp->tdc.count));
2253 
2254 	prop = param_arr[param_rxdma_channels_begin].fcode_name;
2255 
2256 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2257 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2258 		p_cfgp->start_rdc = *prop_val;
2259 		ddi_prop_free(prop_val);
2260 	} else {
2261 		switch (nxgep->niu_type) {
2262 		case NEPTUNE_4_1GC:
2263 			ch_arr_p = &rx_4_1G[0];
2264 			break;
2265 		case NEPTUNE_2_10GF:
2266 			ch_arr_p = &rx_2_10G[0];
2267 			break;
2268 		case NEPTUNE_2_10GF_2_1GC:
2269 		case NEPTUNE_2_10GF_2_1GRF:
2270 			ch_arr_p = &rx_2_10G_2_1G[0];
2271 			break;
2272 		case NEPTUNE_1_10GF_3_1GC:
2273 			ch_arr_p = &rx_1_10G_3_1G[0];
2274 			break;
2275 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2276 			ch_arr_p = &rx_1_1G_1_10G_2_1G[0];
2277 			break;
2278 		default:
2279 			switch (nxgep->platform_type) {
2280 			case P_NEPTUNE_ALONSO:
2281 				ch_arr_p = &rx_2_10G_2_1G[0];
2282 				break;
2283 			default:
2284 				ch_arr_p = &p4_rx_equal[0];
2285 				break;
2286 			}
2287 			break;
2288 		}
2289 		st_rxdma = 0;
2290 		for (i = 0; i < nxgep->function_num; i++, ch_arr_p++)
2291 			st_rxdma += *ch_arr_p;
2292 
2293 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2294 		    prop, st_rxdma);
2295 		p_cfgp->start_rdc = st_rxdma;
2296 	}
2297 
2298 	prop = param_arr[param_rxdma_channels].fcode_name;
2299 
2300 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2301 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2302 		rx_ndmas = *prop_val;
2303 		ddi_prop_free(prop_val);
2304 	} else {
2305 		switch (nxgep->niu_type) {
2306 		case NEPTUNE_4_1GC:
2307 			rx_ndmas = rx_4_1G[nxgep->function_num];
2308 			break;
2309 		case NEPTUNE_2_10GF:
2310 			rx_ndmas = rx_2_10G[nxgep->function_num];
2311 			break;
2312 		case NEPTUNE_2_10GF_2_1GC:
2313 		case NEPTUNE_2_10GF_2_1GRF:
2314 			rx_ndmas = rx_2_10G_2_1G[nxgep->function_num];
2315 			break;
2316 		case NEPTUNE_1_10GF_3_1GC:
2317 			rx_ndmas = rx_1_10G_3_1G[nxgep->function_num];
2318 			break;
2319 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2320 			rx_ndmas = rx_1_1G_1_10G_2_1G[nxgep->function_num];
2321 			break;
2322 		default:
2323 			switch (nxgep->platform_type) {
2324 			case P_NEPTUNE_ALONSO:
2325 				rx_ndmas = rx_2_10G_2_1G[nxgep->function_num];
2326 				break;
2327 			default:
2328 				rx_ndmas = p4_rx_equal[nxgep->function_num];
2329 				break;
2330 			}
2331 			break;
2332 		}
2333 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2334 		    prop, rx_ndmas);
2335 	}
2336 
2337 	p_cfgp->max_rdcs = rx_ndmas;
2338 
2339 	/*
2340 	 * RDC groups and the beginning RDC group assigned to this function.
2341 	 * XXX: this may be wrong if prop value is used.
2342 	 */
2343 	p_cfgp->def_mac_rxdma_grpid =
2344 	    nxgep->function_num * NXGE_MAX_RDC_GROUPS / nxgep->nports;
2345 	p_cfgp->def_mac_txdma_grpid =
2346 	    nxgep->function_num * NXGE_MAX_TDC_GROUPS / nxgep->nports;
2347 
2348 	if ((p_cfgp->def_mac_rxdma_grpid = nxge_fzc_rdc_tbl_bind(nxgep,
2349 	    p_cfgp->def_mac_rxdma_grpid, B_TRUE)) >= NXGE_MAX_RDC_GRPS) {
2350 		NXGE_ERROR_MSG((nxgep, CFG_CTL,
2351 		    "nxge_use_default_dma_config2(): "
2352 		    "nxge_fzc_rdc_tbl_bind failed"));
2353 		goto nxge_use_cfg_dma_config_exit;
2354 	}
2355 
2356 	prop = param_arr[param_rx_rdc_grps].fcode_name;
2357 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2358 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2359 		nrxgp = *prop_val;
2360 		ddi_prop_free(prop_val);
2361 	} else {
2362 		nrxgp = NXGE_MAX_RDC_GRPS / nxgep->nports;
2363 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2364 		    prop, nrxgp);
2365 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2366 		    "==> nxge_use_default_dma_config: "
2367 		    "num_rdc_grpid not found: use def:# of "
2368 		    "rdc groups %d\n", nrxgp));
2369 	}
2370 	p_cfgp->max_rdc_grpids = nrxgp;
2371 
2372 	/*
2373 	 * 2/4 ports have the same hard-wired logical groups assigned.
2374 	 */
2375 	p_cfgp->start_ldg = nxgep->function_num * NXGE_LDGRP_PER_4PORTS;
2376 	p_cfgp->max_ldgs = NXGE_LDGRP_PER_4PORTS;
2377 
2378 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_default_dma_config: "
2379 	    "p_cfgp 0x%llx max_rdcs %d max_grpids %d default_grpid %d",
2380 	    p_cfgp, p_cfgp->max_rdcs, p_cfgp->max_grpids,
2381 	    p_cfgp->def_mac_rxdma_grpid));
2382 
2383 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_dma_config: "
2384 	    "p_cfgp 0x%016llx start_ldg %d nxgep->max_ldgs %d "
2385 	    "def_mac_rxdma_grpid %d",
2386 	    p_cfgp, p_cfgp->start_ldg, p_cfgp->max_ldgs,
2387 	    p_cfgp->def_mac_rxdma_grpid));
2388 
2389 	nxgep->intr_timeout = NXGE_RDC_RCR_TIMEOUT;
2390 	prop = param_arr[param_rxdma_intr_time].fcode_name;
2391 
2392 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2393 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2394 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
2395 			nxgep->intr_timeout = prop_val[0];
2396 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2397 			    nxgep->dip, prop, prop_val, prop_len);
2398 		}
2399 		ddi_prop_free(prop_val);
2400 	}
2401 
2402 	nxgep->intr_threshold = NXGE_RDC_RCR_THRESHOLD;
2403 	prop = param_arr[param_rxdma_intr_pkts].fcode_name;
2404 
2405 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2406 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2407 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
2408 			nxgep->intr_threshold = prop_val[0];
2409 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2410 			    nxgep->dip, prop, prop_val, prop_len);
2411 		}
2412 		ddi_prop_free(prop_val);
2413 	}
2414 	nxge_set_hw_dma_config(nxgep);
2415 
2416 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_dma_config: "
2417 	    "sTDC[%d] nTDC[%d] sRDC[%d] nRDC[%d]",
2418 	    p_cfgp->tdc.start, p_cfgp->tdc.count,
2419 	    p_cfgp->start_rdc, p_cfgp->max_rdcs));
2420 
2421 nxge_use_cfg_dma_config_exit:
2422 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_dma_config"));
2423 }
2424 
2425 void
nxge_get_logical_props(p_nxge_t nxgep)2426 nxge_get_logical_props(p_nxge_t nxgep)
2427 {
2428 	nxge_dma_pt_cfg_t *port = &nxgep->pt_config;
2429 	nxge_hw_pt_cfg_t *hardware;
2430 	nxge_rdc_grp_t *group;
2431 
2432 	(void) memset(port, 0, sizeof (*port));
2433 
2434 	port->mac_port = nxgep->function_num;	/* := function number */
2435 
2436 	/*
2437 	 * alloc_buf_size:
2438 	 * dead variables.
2439 	 */
2440 	port->rbr_size = nxge_rbr_size;
2441 	port->rcr_size = nxge_rcr_size;
2442 
2443 	port->tx_dma_map = 0;	/* Transmit DMA channel bit map */
2444 
2445 	nxge_set_rdc_intr_property(nxgep);
2446 
2447 	port->rcr_full_header = NXGE_RCR_FULL_HEADER;
2448 	port->rx_drr_weight = PT_DRR_WT_DEFAULT_10G;
2449 
2450 	/* ----------------------------------------------------- */
2451 	hardware = &port->hw_config;
2452 
2453 	(void) memset(hardware, 0, sizeof (*hardware));
2454 
2455 	/*
2456 	 * partition_id, read_write_mode:
2457 	 * dead variables.
2458 	 */
2459 
2460 	/*
2461 	 * drr_wt, rx_full_header, *_ldg?, start_mac_entry,
2462 	 * mac_pref, def_mac_rxdma_grpid, start_vlan, max_vlans,
2463 	 * start_ldgs, max_ldgs, max_ldvs,
2464 	 * vlan_pref, def_vlan_rxdma_grpid are meaningful only
2465 	 * in the service domain.
2466 	 */
2467 
2468 	group = &port->rdc_grps[0];
2469 
2470 	group->flag = B_TRUE;	/* configured */
2471 	group->config_method = RDC_TABLE_ENTRY_METHOD_REP;
2472 	group->port = NXGE_GET_PORT_NUM(nxgep->function_num);
2473 
2474 	/* HIO futures: this is still an open question. */
2475 	hardware->max_macs = 1;
2476 }
2477 
2478 static void
nxge_use_cfg_vlan_class_config(p_nxge_t nxgep)2479 nxge_use_cfg_vlan_class_config(p_nxge_t nxgep)
2480 {
2481 	uint_t vlan_cnt;
2482 	int *vlan_cfg_val;
2483 	int status;
2484 	p_nxge_param_t param_arr;
2485 	char *prop;
2486 
2487 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_vlan_config"));
2488 	param_arr = nxgep->param_arr;
2489 	prop = param_arr[param_vlan_2rdc_grp].fcode_name;
2490 
2491 	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2492 	    &vlan_cfg_val, &vlan_cnt);
2493 	if (status == DDI_PROP_SUCCESS) {
2494 		status = ddi_prop_update_int_array(DDI_DEV_T_NONE,
2495 		    nxgep->dip, prop, vlan_cfg_val, vlan_cnt);
2496 		ddi_prop_free(vlan_cfg_val);
2497 	}
2498 	nxge_set_hw_vlan_class_config(nxgep);
2499 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_vlan_config"));
2500 }
2501 
2502 static void
nxge_use_cfg_mac_class_config(p_nxge_t nxgep)2503 nxge_use_cfg_mac_class_config(p_nxge_t nxgep)
2504 {
2505 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2506 	p_nxge_hw_pt_cfg_t p_cfgp;
2507 	uint_t mac_cnt;
2508 	int *mac_cfg_val;
2509 	int status;
2510 	p_nxge_param_t param_arr;
2511 	char *prop;
2512 
2513 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_mac_class_config"));
2514 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2515 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2516 	p_cfgp->start_mac_entry = 0;
2517 	param_arr = nxgep->param_arr;
2518 	prop = param_arr[param_mac_2rdc_grp].fcode_name;
2519 
2520 	switch (nxgep->function_num) {
2521 	case 0:
2522 	case 1:
2523 		/* 10G ports */
2524 		p_cfgp->max_macs = NXGE_MAX_MACS_XMACS;
2525 		break;
2526 	case 2:
2527 	case 3:
2528 		/* 1G ports */
2529 	default:
2530 		p_cfgp->max_macs = NXGE_MAX_MACS_BMACS;
2531 		break;
2532 	}
2533 
2534 	p_cfgp->mac_pref = 1;
2535 	NXGE_DEBUG_MSG((nxgep, OBP_CTL,
2536 	    "== nxge_use_cfg_mac_class_config: "
2537 	    " mac_pref bit set def_mac_rxdma_grpid %d",
2538 	    p_cfgp->def_mac_rxdma_grpid));
2539 
2540 	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2541 	    &mac_cfg_val, &mac_cnt);
2542 	if (status == DDI_PROP_SUCCESS) {
2543 		if (mac_cnt <= p_cfgp->max_macs)
2544 			status = ddi_prop_update_int_array(DDI_DEV_T_NONE,
2545 			    nxgep->dip, prop, mac_cfg_val, mac_cnt);
2546 		ddi_prop_free(mac_cfg_val);
2547 	}
2548 	nxge_set_hw_mac_class_config(nxgep);
2549 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_mac_class_config"));
2550 }
2551 
2552 static void
nxge_use_cfg_class_config(p_nxge_t nxgep)2553 nxge_use_cfg_class_config(p_nxge_t nxgep)
2554 {
2555 	nxge_set_hw_class_config(nxgep);
2556 }
2557 
2558 static void
nxge_set_rdc_intr_property(p_nxge_t nxgep)2559 nxge_set_rdc_intr_property(p_nxge_t nxgep)
2560 {
2561 	int i;
2562 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2563 
2564 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_rdc_intr_property"));
2565 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2566 
2567 	for (i = 0; i < NXGE_MAX_RDCS; i++) {
2568 		p_dma_cfgp->rcr_timeout[i] = nxgep->intr_timeout;
2569 		p_dma_cfgp->rcr_threshold[i] = nxgep->intr_threshold;
2570 	}
2571 
2572 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_rdc_intr_property"));
2573 }
2574 
2575 static void
nxge_set_hw_dma_config(p_nxge_t nxgep)2576 nxge_set_hw_dma_config(p_nxge_t nxgep)
2577 {
2578 	int			i, j, ngrps, bitmap, end, st_rdc;
2579 	p_nxge_dma_pt_cfg_t	p_dma_cfgp;
2580 	p_nxge_hw_pt_cfg_t	p_cfgp;
2581 	p_nxge_rdc_grp_t	rdc_grp_p;
2582 	p_nxge_tdc_grp_t	tdc_grp_p;
2583 	nxge_grp_t		*group;
2584 	uint8_t			nrdcs;
2585 	dc_map_t		map = 0;
2586 
2587 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_set_hw_dma_config"));
2588 
2589 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2590 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2591 
2592 	switch (nxgep->niu_type) {
2593 	case NEPTUNE_4_1GC:
2594 	case NEPTUNE_2_10GF_2_1GC:
2595 	case NEPTUNE_1_10GF_3_1GC:
2596 	case NEPTUNE_1_1GC_1_10GF_2_1GC:
2597 	case NEPTUNE_2_10GF_2_1GRF:
2598 	default:
2599 		ngrps = 2;
2600 		break;
2601 	case NEPTUNE_2_10GF:
2602 	case NEPTUNE_2_1GRF:
2603 	case N2_NIU:
2604 		ngrps = 4;
2605 		break;
2606 	}
2607 
2608 	/*
2609 	 * Setup TDC groups
2610 	 */
2611 	bitmap = 0;
2612 	end = p_cfgp->tdc.start + p_cfgp->tdc.owned;
2613 	for (i = p_cfgp->tdc.start; i < end; i++) {
2614 		bitmap |= (1 << i);
2615 	}
2616 
2617 	nxgep->tx_set.owned.map |= bitmap; /* Owned, & not shared. */
2618 	nxgep->tx_set.owned.count = p_cfgp->tdc.owned;
2619 	p_dma_cfgp->tx_dma_map = bitmap;
2620 
2621 	for (i = 0; i < ngrps; i++) {
2622 		group = (nxge_grp_t *)nxge_grp_add(nxgep,
2623 		    NXGE_TRANSMIT_GROUP);
2624 		tdc_grp_p = &p_dma_cfgp->tdc_grps[
2625 		    p_cfgp->def_mac_txdma_grpid + i];
2626 		if (i == 0)
2627 			tdc_grp_p->map = bitmap;
2628 		else
2629 			tdc_grp_p->map = 0;
2630 		/* no ring is associated with a group initially */
2631 		tdc_grp_p->start_tdc = 0;
2632 		tdc_grp_p->max_tdcs = 0;
2633 		tdc_grp_p->grp_index = group->index;
2634 	}
2635 
2636 	/*
2637 	 * Setup RDC groups
2638 	 */
2639 	st_rdc = p_cfgp->start_rdc;
2640 	for (i = 0; i < ngrps; i++) {
2641 		/*
2642 		 * All rings are associated with the default group initially
2643 		 */
2644 		if (i == 0) {
2645 			/* default group */
2646 			switch (nxgep->niu_type) {
2647 			case NEPTUNE_4_1GC:
2648 				nrdcs = rx_4_1G[nxgep->function_num];
2649 				break;
2650 			case N2_NIU:
2651 			case NEPTUNE_2_10GF:
2652 				nrdcs = rx_2_10G[nxgep->function_num];
2653 				break;
2654 			case NEPTUNE_2_10GF_2_1GC:
2655 				nrdcs = rx_2_10G_2_1G[nxgep->function_num];
2656 				break;
2657 			case NEPTUNE_1_10GF_3_1GC:
2658 				nrdcs = rx_1_10G_3_1G[nxgep->function_num];
2659 				break;
2660 			case NEPTUNE_1_1GC_1_10GF_2_1GC:
2661 				nrdcs = rx_1_1G_1_10G_2_1G[nxgep->function_num];
2662 				break;
2663 			default:
2664 				switch (nxgep->platform_type) {
2665 				case P_NEPTUNE_ALONSO:
2666 					nrdcs =
2667 					    rx_2_10G_2_1G[nxgep->function_num];
2668 					break;
2669 				default:
2670 					nrdcs = rx_4_1G[nxgep->function_num];
2671 					break;
2672 				}
2673 				break;
2674 			}
2675 
2676 			if (p_cfgp->max_rdcs < nrdcs)
2677 				nrdcs = p_cfgp->max_rdcs;
2678 		} else {
2679 			nrdcs = 0;
2680 		}
2681 
2682 		rdc_grp_p = &p_dma_cfgp->rdc_grps[
2683 		    p_cfgp->def_mac_rxdma_grpid + i];
2684 		rdc_grp_p->start_rdc = st_rdc;
2685 		rdc_grp_p->max_rdcs = nrdcs;
2686 		rdc_grp_p->def_rdc = rdc_grp_p->start_rdc;
2687 
2688 		/* default to: 0, 1, 2, 3, ...., 0, 1, 2, 3.... */
2689 		if (nrdcs != 0) {
2690 			for (j = 0; j < nrdcs; j++) {
2691 				map |= (1 << j);
2692 			}
2693 			map <<= rdc_grp_p->start_rdc;
2694 		} else
2695 			map = 0;
2696 		rdc_grp_p->map = map;
2697 
2698 		nxgep->rx_set.owned.map |= map; /* Owned, & not shared. */
2699 		nxgep->rx_set.owned.count = nrdcs;
2700 
2701 		group = (nxge_grp_t *)nxge_grp_add(nxgep, NXGE_RECEIVE_GROUP);
2702 
2703 		rdc_grp_p->config_method = RDC_TABLE_ENTRY_METHOD_SEQ;
2704 		rdc_grp_p->flag = B_TRUE; /* This group has been configured. */
2705 		rdc_grp_p->grp_index = group->index;
2706 		rdc_grp_p->port = NXGE_GET_PORT_NUM(nxgep->function_num);
2707 
2708 		map = 0;
2709 	}
2710 
2711 
2712 	/* default RDC */
2713 	p_cfgp->def_rdc = p_cfgp->start_rdc;
2714 	nxgep->def_rdc = p_cfgp->start_rdc;
2715 
2716 	/* full 18 byte header ? */
2717 	p_dma_cfgp->rcr_full_header = NXGE_RCR_FULL_HEADER;
2718 	p_dma_cfgp->rx_drr_weight = PT_DRR_WT_DEFAULT_10G;
2719 	if (nxgep->function_num > 1)
2720 		p_dma_cfgp->rx_drr_weight = PT_DRR_WT_DEFAULT_1G;
2721 	p_dma_cfgp->rbr_size = nxge_rbr_size;
2722 	p_dma_cfgp->rcr_size = nxge_rcr_size;
2723 
2724 	nxge_set_rdc_intr_property(nxgep);
2725 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_hw_dma_config"));
2726 }
2727 
2728 boolean_t
nxge_check_rxdma_port_member(p_nxge_t nxgep,uint8_t rdc)2729 nxge_check_rxdma_port_member(p_nxge_t nxgep, uint8_t rdc)
2730 {
2731 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2732 	p_nxge_hw_pt_cfg_t p_cfgp;
2733 	int status = B_TRUE;
2734 
2735 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_rxdma_port_member"));
2736 
2737 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2738 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2739 
2740 	/* Receive DMA Channels */
2741 	if (rdc < p_cfgp->max_rdcs)
2742 		status = B_TRUE;
2743 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_rxdma_port_member"));
2744 	return (status);
2745 }
2746 
2747 boolean_t
nxge_check_txdma_port_member(p_nxge_t nxgep,uint8_t tdc)2748 nxge_check_txdma_port_member(p_nxge_t nxgep, uint8_t tdc)
2749 {
2750 	int status = B_FALSE;
2751 
2752 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_txdma_port_member"));
2753 
2754 	if (tdc >= nxgep->pt_config.hw_config.tdc.start &&
2755 	    tdc < nxgep->pt_config.hw_config.tdc.count)
2756 		status = B_TRUE;
2757 
2758 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_txdma_port_member"));
2759 	return (status);
2760 }
2761 
2762 boolean_t
nxge_check_rxdma_rdcgrp_member(p_nxge_t nxgep,uint8_t rdc_grp,uint8_t rdc)2763 nxge_check_rxdma_rdcgrp_member(p_nxge_t nxgep, uint8_t rdc_grp, uint8_t rdc)
2764 {
2765 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2766 	int status = B_TRUE;
2767 	p_nxge_rdc_grp_t rdc_grp_p;
2768 
2769 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2770 	    " ==> nxge_check_rxdma_rdcgrp_member"));
2771 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "  nxge_check_rxdma_rdcgrp_member"
2772 	    " rdc  %d group %d", rdc, rdc_grp));
2773 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2774 
2775 	rdc_grp_p = &p_dma_cfgp->rdc_grps[rdc_grp];
2776 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "  max  %d ", rdc_grp_p->max_rdcs));
2777 	if (rdc >= rdc_grp_p->max_rdcs) {
2778 		status = B_FALSE;
2779 	}
2780 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2781 	    " <== nxge_check_rxdma_rdcgrp_member"));
2782 	return (status);
2783 }
2784 
2785 boolean_t
nxge_check_rdcgrp_port_member(p_nxge_t nxgep,uint8_t rdc_grp)2786 nxge_check_rdcgrp_port_member(p_nxge_t nxgep, uint8_t rdc_grp)
2787 {
2788 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2789 	p_nxge_hw_pt_cfg_t p_cfgp;
2790 	int status = B_TRUE;
2791 
2792 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_rdcgrp_port_member"));
2793 
2794 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2795 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2796 
2797 	if (rdc_grp >= p_cfgp->max_rdc_grpids)
2798 		status = B_FALSE;
2799 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_rdcgrp_port_member"));
2800 	return (status);
2801 }
2802 
2803 static void
nxge_set_hw_vlan_class_config(p_nxge_t nxgep)2804 nxge_set_hw_vlan_class_config(p_nxge_t nxgep)
2805 {
2806 	int i;
2807 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2808 	p_nxge_hw_pt_cfg_t p_cfgp;
2809 	p_nxge_param_t param_arr;
2810 	uint_t vlan_cnt;
2811 	int *vlan_cfg_val;
2812 	nxge_param_map_t *vmap;
2813 	char *prop;
2814 	p_nxge_class_pt_cfg_t p_class_cfgp;
2815 	uint32_t good_cfg[32];
2816 	int good_count = 0;
2817 	nxge_mv_cfg_t *vlan_tbl;
2818 
2819 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_hw_vlan_config"));
2820 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2821 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2822 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2823 
2824 	param_arr = nxgep->param_arr;
2825 	prop = param_arr[param_vlan_2rdc_grp].fcode_name;
2826 
2827 	/*
2828 	 * By default, VLAN to RDC group mapping is disabled Need to read HW or
2829 	 * .conf properties to find out if mapping is required
2830 	 *
2831 	 * Format
2832 	 *
2833 	 * uint32_t array, each array entry specifying the VLAN id and the
2834 	 * mapping
2835 	 *
2836 	 * bit[30] = add bit[29] = remove bit[28]  = preference bits[23-16] =
2837 	 * rdcgrp bits[15-0] = VLAN ID ( )
2838 	 */
2839 
2840 	for (i = 0; i < NXGE_MAX_VLANS; i++) {
2841 		p_class_cfgp->vlan_tbl[i].flag = 0;
2842 	}
2843 
2844 	vlan_tbl = (nxge_mv_cfg_t *)&p_class_cfgp->vlan_tbl[0];
2845 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2846 	    &vlan_cfg_val, &vlan_cnt) == DDI_PROP_SUCCESS) {
2847 		for (i = 0; i < vlan_cnt; i++) {
2848 			vmap = (nxge_param_map_t *)&vlan_cfg_val[i];
2849 			if ((vmap->param_id) &&
2850 			    (vmap->param_id < NXGE_MAX_VLANS) &&
2851 			    (vmap->map_to < p_cfgp->max_rdc_grpids)) {
2852 				NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2853 				    " nxge_vlan_config mapping"
2854 				    " id %d grp %d",
2855 				    vmap->param_id, vmap->map_to));
2856 				good_cfg[good_count] = vlan_cfg_val[i];
2857 				if (vlan_tbl[vmap->param_id].flag == 0)
2858 					good_count++;
2859 				vlan_tbl[vmap->param_id].flag = 1;
2860 				vlan_tbl[vmap->param_id].rdctbl =
2861 				    vmap->map_to + p_cfgp->def_mac_rxdma_grpid;
2862 				vlan_tbl[vmap->param_id].mpr_npr = vmap->pref;
2863 			}
2864 		}
2865 		ddi_prop_free(vlan_cfg_val);
2866 		if (good_count != vlan_cnt) {
2867 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2868 			    nxgep->dip, prop, (int *)good_cfg, good_count);
2869 		}
2870 	}
2871 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_set_hw_vlan_config"));
2872 }
2873 
2874 static void
nxge_set_hw_mac_class_config(p_nxge_t nxgep)2875 nxge_set_hw_mac_class_config(p_nxge_t nxgep)
2876 {
2877 	int i;
2878 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2879 	p_nxge_hw_pt_cfg_t p_cfgp;
2880 	p_nxge_param_t param_arr;
2881 	uint_t mac_cnt;
2882 	int *mac_cfg_val;
2883 	nxge_param_map_t *mac_map;
2884 	char *prop;
2885 	p_nxge_class_pt_cfg_t p_class_cfgp;
2886 	int good_count = 0;
2887 	int good_cfg[NXGE_MAX_MACS];
2888 	nxge_mv_cfg_t *mac_host_info;
2889 
2890 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_set_hw_mac_config"));
2891 
2892 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2893 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2894 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2895 	mac_host_info = (nxge_mv_cfg_t *)&p_class_cfgp->mac_host_info[0];
2896 
2897 	param_arr = nxgep->param_arr;
2898 	prop = param_arr[param_mac_2rdc_grp].fcode_name;
2899 
2900 	for (i = 0; i < NXGE_MAX_MACS; i++) {
2901 		p_class_cfgp->mac_host_info[i].flag = 0;
2902 		p_class_cfgp->mac_host_info[i].rdctbl =
2903 		    p_cfgp->def_mac_rxdma_grpid;
2904 	}
2905 
2906 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2907 	    &mac_cfg_val, &mac_cnt) == DDI_PROP_SUCCESS) {
2908 		for (i = 0; i < mac_cnt; i++) {
2909 			mac_map = (nxge_param_map_t *)&mac_cfg_val[i];
2910 			if ((mac_map->param_id < p_cfgp->max_macs) &&
2911 			    (mac_map->map_to < p_cfgp->max_rdc_grpids)) {
2912 				NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2913 				    " nxge_mac_config mapping"
2914 				    " id %d grp %d",
2915 				    mac_map->param_id, mac_map->map_to));
2916 				mac_host_info[mac_map->param_id].mpr_npr =
2917 				    p_cfgp->mac_pref;
2918 				mac_host_info[mac_map->param_id].rdctbl =
2919 				    mac_map->map_to +
2920 				    p_cfgp->def_mac_rxdma_grpid;
2921 				good_cfg[good_count] = mac_cfg_val[i];
2922 				if (mac_host_info[mac_map->param_id].flag == 0)
2923 					good_count++;
2924 				mac_host_info[mac_map->param_id].flag = 1;
2925 			}
2926 		}
2927 		ddi_prop_free(mac_cfg_val);
2928 		if (good_count != mac_cnt) {
2929 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2930 			    nxgep->dip, prop, good_cfg, good_count);
2931 		}
2932 	}
2933 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_set_hw_mac_config"));
2934 }
2935 
2936 static void
nxge_set_hw_class_config(p_nxge_t nxgep)2937 nxge_set_hw_class_config(p_nxge_t nxgep)
2938 {
2939 	int i;
2940 	p_nxge_param_t param_arr;
2941 	int *int_prop_val;
2942 	uint32_t cfg_value;
2943 	char *prop;
2944 	p_nxge_class_pt_cfg_t p_class_cfgp;
2945 	int start_prop, end_prop;
2946 	uint_t prop_cnt;
2947 	int start_class, j = 0;
2948 
2949 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_hw_class_config"));
2950 
2951 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2952 	param_arr = nxgep->param_arr;
2953 	start_prop = param_class_opt_ipv4_tcp;
2954 	end_prop = param_class_opt_ipv6_sctp;
2955 	start_class = TCAM_CLASS_TCP_IPV4;
2956 
2957 	for (i = start_prop, j = 0; i <= end_prop; i++, j++) {
2958 		prop = param_arr[i].fcode_name;
2959 		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip,
2960 		    0, prop, &int_prop_val,
2961 		    &prop_cnt) == DDI_PROP_SUCCESS) {
2962 			cfg_value = (uint32_t)*int_prop_val;
2963 			ddi_prop_free(int_prop_val);
2964 		} else {
2965 			cfg_value = (uint32_t)param_arr[i].value;
2966 		}
2967 		p_class_cfgp->class_cfg[start_class + j] = cfg_value;
2968 	}
2969 
2970 	prop = param_arr[param_h1_init_value].fcode_name;
2971 
2972 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2973 	    &int_prop_val, &prop_cnt) == DDI_PROP_SUCCESS) {
2974 		cfg_value = (uint32_t)*int_prop_val;
2975 		ddi_prop_free(int_prop_val);
2976 	} else {
2977 		cfg_value = (uint32_t)param_arr[param_h1_init_value].value;
2978 	}
2979 
2980 	p_class_cfgp->init_h1 = (uint32_t)cfg_value;
2981 	prop = param_arr[param_h2_init_value].fcode_name;
2982 
2983 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2984 	    &int_prop_val, &prop_cnt) == DDI_PROP_SUCCESS) {
2985 		cfg_value = (uint32_t)*int_prop_val;
2986 		ddi_prop_free(int_prop_val);
2987 	} else {
2988 		cfg_value = (uint32_t)param_arr[param_h2_init_value].value;
2989 	}
2990 
2991 	p_class_cfgp->init_h2 = (uint16_t)cfg_value;
2992 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_hw_class_config"));
2993 }
2994 
2995 nxge_status_t
nxge_ldgv_init_n2(p_nxge_t nxgep,int * navail_p,int * nrequired_p)2996 nxge_ldgv_init_n2(p_nxge_t nxgep, int *navail_p, int *nrequired_p)
2997 {
2998 	int i, maxldvs, maxldgs, nldvs;
2999 	int ldv, endldg;
3000 	uint8_t func;
3001 	uint8_t channel;
3002 	uint8_t chn_start;
3003 	boolean_t own_sys_err = B_FALSE, own_fzc = B_FALSE;
3004 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
3005 	p_nxge_hw_pt_cfg_t p_cfgp;
3006 	p_nxge_ldgv_t ldgvp;
3007 	p_nxge_ldg_t ldgp, ptr;
3008 	p_nxge_ldv_t ldvp, sysldvp;
3009 	nxge_status_t status = NXGE_OK;
3010 	nxge_grp_set_t *set;
3011 
3012 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2"));
3013 	if (!*navail_p) {
3014 		*nrequired_p = 0;
3015 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3016 		    "<== nxge_ldgv_init:no avail"));
3017 		return (NXGE_ERROR);
3018 	}
3019 	/*
3020 	 * N2/NIU: one logical device owns one logical group. and each
3021 	 * device/group will be assigned one vector by Hypervisor.
3022 	 */
3023 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
3024 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
3025 	maxldgs = p_cfgp->max_ldgs;
3026 	if (!maxldgs) {
3027 		/* No devices configured. */
3028 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_init_n2: "
3029 		    "no logical groups configured."));
3030 		return (NXGE_ERROR);
3031 	} else {
3032 		maxldvs = maxldgs + 1;
3033 	}
3034 
3035 	/*
3036 	 * If function zero instance, it needs to handle the system and MIF
3037 	 * error interrupts. MIF interrupt may not be needed for N2/NIU.
3038 	 */
3039 	func = nxgep->function_num;
3040 	if (func == 0) {
3041 		own_sys_err = B_TRUE;
3042 		if (!p_cfgp->ser_ldvid) {
3043 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3044 			    "nxge_ldgv_init_n2: func 0, ERR ID not set!"));
3045 		}
3046 		/* MIF interrupt */
3047 		if (!p_cfgp->mif_ldvid) {
3048 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3049 			    "nxge_ldgv_init_n2: func 0, MIF ID not set!"));
3050 		}
3051 	}
3052 
3053 	/*
3054 	 * Assume single partition, each function owns mac.
3055 	 */
3056 	if (!nxge_use_partition)
3057 		own_fzc = B_TRUE;
3058 
3059 	ldgvp = nxgep->ldgvp;
3060 	if (ldgvp == NULL) {
3061 		ldgvp = KMEM_ZALLOC(sizeof (nxge_ldgv_t), KM_SLEEP);
3062 		nxgep->ldgvp = ldgvp;
3063 		ldgvp->maxldgs = (uint8_t)maxldgs;
3064 		ldgvp->maxldvs = (uint8_t)maxldvs;
3065 		ldgp = ldgvp->ldgp = KMEM_ZALLOC(
3066 		    sizeof (nxge_ldg_t) * maxldgs, KM_SLEEP);
3067 		ldvp = ldgvp->ldvp = KMEM_ZALLOC(
3068 		    sizeof (nxge_ldv_t) * maxldvs, KM_SLEEP);
3069 	} else {
3070 		ldgp = ldgvp->ldgp;
3071 		ldvp = ldgvp->ldvp;
3072 	}
3073 
3074 	ldgvp->ndma_ldvs = p_cfgp->tdc.owned + p_cfgp->max_rdcs;
3075 	ldgvp->tmres = NXGE_TIMER_RESO;
3076 
3077 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3078 	    "==> nxge_ldgv_init_n2: maxldvs %d maxldgs %d",
3079 	    maxldvs, maxldgs));
3080 
3081 	/* logical start_ldg is ldv */
3082 	ptr = ldgp;
3083 	for (i = 0; i < maxldgs; i++) {
3084 		ptr->func = func;
3085 		ptr->arm = B_TRUE;
3086 		ptr->vldg_index = (uint8_t)i;
3087 		ptr->ldg_timer = NXGE_TIMER_LDG;
3088 		ptr->ldg = p_cfgp->ldg[i];
3089 		ptr->sys_intr_handler = nxge_intr;
3090 		ptr->nldvs = 0;
3091 		ptr->ldvp = NULL;
3092 		ptr->nxgep = nxgep;
3093 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3094 		    "==> nxge_ldgv_init_n2: maxldvs %d maxldgs %d "
3095 		    "ldg %d ldgptr $%p",
3096 		    maxldvs, maxldgs, ptr->ldg, ptr));
3097 		ptr++;
3098 	}
3099 
3100 	endldg = NXGE_INT_MAX_LDG;
3101 	nldvs = 0;
3102 	ldgvp->nldvs = 0;
3103 	ldgp->ldvp = NULL;
3104 	*nrequired_p = 0;
3105 
3106 	/*
3107 	 * logical device group table is organized in the following order (same
3108 	 * as what interrupt property has). function 0: owns MAC, MIF, error,
3109 	 * rx, tx. function 1: owns MAC, rx, tx.
3110 	 */
3111 
3112 	if (own_fzc && p_cfgp->mac_ldvid) {
3113 		/* Each function should own MAC interrupt */
3114 		ldv = p_cfgp->mac_ldvid;
3115 		ldvp->ldv = (uint8_t)ldv;
3116 		ldvp->is_mac = B_TRUE;
3117 		ldvp->ldv_intr_handler = nxge_mac_intr;
3118 		ldvp->ldv_ldf_masks = 0;
3119 		ldvp->nxgep = nxgep;
3120 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3121 		    "==> nxge_ldgv_init_n2(mac): maxldvs %d ldv %d "
3122 		    "ldg %d ldgptr $%p ldvptr $%p",
3123 		    maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3124 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3125 		nldvs++;
3126 	}
3127 
3128 	if (own_fzc && p_cfgp->mif_ldvid) {
3129 		ldv = p_cfgp->mif_ldvid;
3130 		ldvp->ldv = (uint8_t)ldv;
3131 		ldvp->is_mif = B_TRUE;
3132 		ldvp->ldv_intr_handler = nxge_mif_intr;
3133 		ldvp->ldv_ldf_masks = 0;
3134 		ldvp->nxgep = nxgep;
3135 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3136 		    "==> nxge_ldgv_init_n2(mif): maxldvs %d ldv %d "
3137 		    "ldg %d ldgptr $%p ldvptr $%p",
3138 		    maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3139 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3140 		nldvs++;
3141 	}
3142 
3143 	/*
3144 	 * HW based syserr interrupt for port0, and SW based syserr interrupt
3145 	 * for port1
3146 	 */
3147 	if (own_sys_err && p_cfgp->ser_ldvid) {
3148 		ldv = p_cfgp->ser_ldvid;
3149 		/*
3150 		 * Unmask the system interrupt states.
3151 		 */
3152 		(void) nxge_fzc_sys_err_mask_set(nxgep, SYS_ERR_SMX_MASK |
3153 		    SYS_ERR_IPP_MASK | SYS_ERR_TXC_MASK |
3154 		    SYS_ERR_ZCP_MASK);
3155 
3156 		ldvp->use_timer = B_TRUE;
3157 		ldvp->ldv = (uint8_t)ldv;
3158 		ldvp->is_syserr = B_TRUE;
3159 		ldvp->ldv_intr_handler = nxge_syserr_intr;
3160 		ldvp->ldv_ldf_masks = 0;
3161 		ldvp->nxgep = nxgep;
3162 		ldgvp->ldvp_syserr = ldvp;
3163 
3164 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3165 		    "==> nxge_ldgv_init_n2(syserr): maxldvs %d ldv %d "
3166 		    "ldg %d ldgptr $%p ldvptr p%p",
3167 		    maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3168 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3169 		nldvs++;
3170 	} else {
3171 		/*
3172 		 * SW based: allocate the ldv for the syserr since the vector
3173 		 * should not be consumed for port1
3174 		 */
3175 		sysldvp = KMEM_ZALLOC(sizeof (nxge_ldv_t), KM_SLEEP);
3176 		sysldvp->use_timer = B_TRUE;
3177 		sysldvp->ldv = NXGE_SYS_ERROR_LD;
3178 		sysldvp->is_syserr = B_TRUE;
3179 		sysldvp->ldv_intr_handler = nxge_syserr_intr;
3180 		sysldvp->ldv_ldf_masks = 0;
3181 		sysldvp->nxgep = nxgep;
3182 		ldgvp->ldvp_syserr = sysldvp;
3183 		ldgvp->ldvp_syserr_alloced = B_TRUE;
3184 	}
3185 
3186 
3187 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3188 	    "(before rx) func %d nldvs %d navail %d nrequired %d",
3189 	    func, nldvs, *navail_p, *nrequired_p));
3190 
3191 	/*
3192 	 * Start with RDC to configure logical devices for each group.
3193 	 */
3194 	chn_start = p_cfgp->ldg_chn_start;
3195 	set = &nxgep->rx_set;
3196 	for (channel = 0; channel < NXGE_MAX_RDCS; channel++) {
3197 		if ((1 << channel) & set->owned.map) {
3198 			ldvp->is_rxdma = B_TRUE;
3199 			ldvp->ldv = (uint8_t)channel + NXGE_RDMA_LD_START;
3200 			ldvp->channel = channel;
3201 			ldvp->vdma_index = (uint8_t)channel;
3202 			ldvp->ldv_intr_handler = nxge_rx_intr;
3203 			ldvp->ldv_ldf_masks = 0;
3204 			ldvp->nxgep = nxgep;
3205 			ldgp->ldg = p_cfgp->ldg[chn_start];
3206 
3207 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3208 			    "==> nxge_ldgv_init_n2(rx%d): maxldvs %d ldv %d "
3209 			    "ldg %d ldgptr 0x%016llx ldvptr 0x%016llx",
3210 			    i, maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3211 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3212 			    endldg, nrequired_p);
3213 			nldvs++;
3214 			chn_start++;
3215 		}
3216 	}
3217 
3218 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3219 	    "func %d nldvs %d navail %d nrequired %d",
3220 	    func, nldvs, *navail_p, *nrequired_p));
3221 
3222 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3223 	    "func %d nldvs %d navail %d nrequired %d ldgp 0x%llx "
3224 	    "ldvp 0x%llx",
3225 	    func, nldvs, *navail_p, *nrequired_p, ldgp, ldvp));
3226 	/*
3227 	 * Transmit DMA channels.
3228 	 */
3229 	chn_start = p_cfgp->ldg_chn_start + 8;
3230 	set = &nxgep->tx_set;
3231 	for (channel = 0; channel < NXGE_MAX_TDCS; channel++) {
3232 		if ((1 << channel) & set->owned.map) {
3233 			ldvp->is_txdma = B_TRUE;
3234 			ldvp->ldv = (uint8_t)channel + NXGE_TDMA_LD_START;
3235 			ldvp->channel = channel;
3236 			ldvp->vdma_index = (uint8_t)channel;
3237 			ldvp->ldv_intr_handler = nxge_tx_intr;
3238 			ldvp->ldv_ldf_masks = 0;
3239 			ldgp->ldg = p_cfgp->ldg[chn_start];
3240 			ldvp->nxgep = nxgep;
3241 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3242 			    "==> nxge_ldgv_init_n2(tx%d): maxldvs %d ldv %d "
3243 			    "ldg %d ldgptr %p ldvptr %p",
3244 			    channel, maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3245 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3246 			    endldg, nrequired_p);
3247 			nldvs++;
3248 			chn_start++;
3249 		}
3250 	}
3251 
3252 	ldgvp->ldg_intrs = *nrequired_p;
3253 	ldgvp->nldvs = (uint8_t)nldvs;
3254 
3255 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3256 	    "func %d nldvs %d maxgrps %d navail %d nrequired %d",
3257 	    func, nldvs, maxldgs, *navail_p, *nrequired_p));
3258 
3259 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_init_n2"));
3260 	return (status);
3261 }
3262 
3263 /*
3264  * Interrupts related interface functions.
3265  */
3266 
3267 nxge_status_t
nxge_ldgv_init(p_nxge_t nxgep,int * navail_p,int * nrequired_p)3268 nxge_ldgv_init(p_nxge_t nxgep, int *navail_p, int *nrequired_p)
3269 {
3270 	int i, maxldvs, maxldgs, nldvs;
3271 	int ldv, ldg, endldg, ngrps;
3272 	uint8_t func;
3273 	uint8_t channel;
3274 	boolean_t own_sys_err = B_FALSE, own_fzc = B_FALSE;
3275 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
3276 	p_nxge_hw_pt_cfg_t p_cfgp;
3277 	p_nxge_ldgv_t ldgvp;
3278 	p_nxge_ldg_t ldgp, ptr;
3279 	p_nxge_ldv_t ldvp;
3280 	nxge_grp_set_t *set;
3281 
3282 	nxge_status_t status = NXGE_OK;
3283 
3284 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init"));
3285 	if (!*navail_p) {
3286 		*nrequired_p = 0;
3287 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3288 		    "<== nxge_ldgv_init:no avail"));
3289 		return (NXGE_ERROR);
3290 	}
3291 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
3292 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
3293 
3294 	nldvs = p_cfgp->tdc.owned + p_cfgp->max_rdcs;
3295 
3296 	/*
3297 	 * If function zero instance, it needs to handle the system error
3298 	 * interrupts.
3299 	 */
3300 	func = nxgep->function_num;
3301 	if (func == 0) {
3302 		nldvs++;
3303 		own_sys_err = B_TRUE;
3304 	} else {
3305 		/* use timer */
3306 		nldvs++;
3307 	}
3308 
3309 	/*
3310 	 * Assume single partition, each function owns mac.
3311 	 */
3312 	if (!nxge_use_partition) {
3313 		/* mac */
3314 		nldvs++;
3315 		/* MIF */
3316 		nldvs++;
3317 		own_fzc = B_TRUE;
3318 	}
3319 	maxldvs = nldvs;
3320 	maxldgs = p_cfgp->max_ldgs;
3321 	if (!maxldvs || !maxldgs) {
3322 		/* No devices configured. */
3323 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_init: "
3324 		    "no logical devices or groups configured."));
3325 		return (NXGE_ERROR);
3326 	}
3327 	ldgvp = nxgep->ldgvp;
3328 	if (ldgvp == NULL) {
3329 		ldgvp = KMEM_ZALLOC(sizeof (nxge_ldgv_t), KM_SLEEP);
3330 		nxgep->ldgvp = ldgvp;
3331 		ldgvp->maxldgs = (uint8_t)maxldgs;
3332 		ldgvp->maxldvs = (uint8_t)maxldvs;
3333 		ldgp = ldgvp->ldgp = KMEM_ZALLOC(sizeof (nxge_ldg_t) * maxldgs,
3334 		    KM_SLEEP);
3335 		ldvp = ldgvp->ldvp = KMEM_ZALLOC(sizeof (nxge_ldv_t) * maxldvs,
3336 		    KM_SLEEP);
3337 	}
3338 	ldgvp->ndma_ldvs = p_cfgp->tdc.owned + p_cfgp->max_rdcs;
3339 	ldgvp->tmres = NXGE_TIMER_RESO;
3340 
3341 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3342 	    "==> nxge_ldgv_init: maxldvs %d maxldgs %d nldvs %d",
3343 	    maxldvs, maxldgs, nldvs));
3344 	ldg = p_cfgp->start_ldg;
3345 	ptr = ldgp;
3346 	for (i = 0; i < maxldgs; i++) {
3347 		ptr->func = func;
3348 		ptr->arm = B_TRUE;
3349 		ptr->vldg_index = (uint8_t)i;
3350 		ptr->ldg_timer = NXGE_TIMER_LDG;
3351 		ptr->ldg = ldg++;
3352 		ptr->sys_intr_handler = nxge_intr;
3353 		ptr->nldvs = 0;
3354 		ptr->nxgep = nxgep;
3355 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3356 		    "==> nxge_ldgv_init: maxldvs %d maxldgs %d ldg %d",
3357 		    maxldvs, maxldgs, ptr->ldg));
3358 		ptr++;
3359 	}
3360 
3361 	ldg = p_cfgp->start_ldg;
3362 	if (maxldgs > *navail_p) {
3363 		ngrps = *navail_p;
3364 	} else {
3365 		ngrps = maxldgs;
3366 	}
3367 	endldg = ldg + ngrps;
3368 
3369 	/*
3370 	 * Receive DMA channels.
3371 	 */
3372 	nldvs = 0;
3373 	ldgvp->nldvs = 0;
3374 	ldgp->ldvp = NULL;
3375 	*nrequired_p = 0;
3376 
3377 	/*
3378 	 * Start with RDC to configure logical devices for each group.
3379 	 */
3380 	set = &nxgep->rx_set;
3381 	for (channel = 0; channel < NXGE_MAX_RDCS; channel++) {
3382 		if ((1 << channel) & set->owned.map) {
3383 			/* For now, <channel & <vdma_index> are the same. */
3384 			ldvp->is_rxdma = B_TRUE;
3385 			ldvp->ldv = (uint8_t)channel + NXGE_RDMA_LD_START;
3386 			ldvp->channel = channel;
3387 			ldvp->vdma_index = (uint8_t)channel;
3388 			ldvp->ldv_intr_handler = nxge_rx_intr;
3389 			ldvp->ldv_ldf_masks = 0;
3390 			ldvp->use_timer = B_FALSE;
3391 			ldvp->nxgep = nxgep;
3392 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3393 			    endldg, nrequired_p);
3394 			nldvs++;
3395 		}
3396 	}
3397 
3398 	/*
3399 	 * Transmit DMA channels.
3400 	 */
3401 	set = &nxgep->tx_set;
3402 	for (channel = 0; channel < NXGE_MAX_TDCS; channel++) {
3403 		if ((1 << channel) & set->owned.map) {
3404 			/* For now, <channel & <vdma_index> are the same. */
3405 			ldvp->is_txdma = B_TRUE;
3406 			ldvp->ldv = (uint8_t)channel + NXGE_TDMA_LD_START;
3407 			ldvp->channel = channel;
3408 			ldvp->vdma_index = (uint8_t)channel;
3409 			ldvp->ldv_intr_handler = nxge_tx_intr;
3410 			ldvp->ldv_ldf_masks = 0;
3411 			ldvp->use_timer = B_FALSE;
3412 			ldvp->nxgep = nxgep;
3413 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3414 			    endldg, nrequired_p);
3415 			nldvs++;
3416 		}
3417 	}
3418 
3419 	if (own_fzc) {
3420 		ldv = NXGE_MIF_LD;
3421 		ldvp->ldv = (uint8_t)ldv;
3422 		ldvp->is_mif = B_TRUE;
3423 		ldvp->ldv_intr_handler = nxge_mif_intr;
3424 		ldvp->ldv_ldf_masks = 0;
3425 		ldvp->use_timer = B_FALSE;
3426 		ldvp->nxgep = nxgep;
3427 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3428 		nldvs++;
3429 	}
3430 	/*
3431 	 * MAC port (function zero control)
3432 	 */
3433 	if (own_fzc) {
3434 		ldvp->is_mac = B_TRUE;
3435 		ldvp->ldv_intr_handler = nxge_mac_intr;
3436 		ldvp->ldv_ldf_masks = 0;
3437 		ldv = func + NXGE_MAC_LD_START;
3438 		ldvp->ldv = (uint8_t)ldv;
3439 		ldvp->use_timer = B_FALSE;
3440 		ldvp->nxgep = nxgep;
3441 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3442 		nldvs++;
3443 	}
3444 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init: "
3445 	    "func %d nldvs %d navail %d nrequired %d",
3446 	    func, nldvs, *navail_p, *nrequired_p));
3447 	/*
3448 	 * Function 0 owns system error interrupts.
3449 	 */
3450 	ldvp->use_timer = B_TRUE;
3451 	if (own_sys_err) {
3452 		ldv = NXGE_SYS_ERROR_LD;
3453 		ldvp->ldv = (uint8_t)ldv;
3454 		ldvp->is_syserr = B_TRUE;
3455 		ldvp->ldv_intr_handler = nxge_syserr_intr;
3456 		ldvp->ldv_ldf_masks = 0;
3457 		ldvp->nxgep = nxgep;
3458 		ldgvp->ldvp_syserr = ldvp;
3459 		/*
3460 		 * Unmask the system interrupt states.
3461 		 */
3462 		(void) nxge_fzc_sys_err_mask_set(nxgep, SYS_ERR_SMX_MASK |
3463 		    SYS_ERR_IPP_MASK | SYS_ERR_TXC_MASK |
3464 		    SYS_ERR_ZCP_MASK);
3465 
3466 		(void) nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3467 		nldvs++;
3468 	} else {
3469 		ldv = NXGE_SYS_ERROR_LD;
3470 		ldvp->ldv = (uint8_t)ldv;
3471 		ldvp->is_syserr = B_TRUE;
3472 		ldvp->ldv_intr_handler = nxge_syserr_intr;
3473 		ldvp->nxgep = nxgep;
3474 		ldvp->ldv_ldf_masks = 0;
3475 		ldgvp->ldvp_syserr = ldvp;
3476 	}
3477 
3478 	ldgvp->ldg_intrs = *nrequired_p;
3479 
3480 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init: "
3481 	    "func %d nldvs %d navail %d nrequired %d",
3482 	    func, nldvs, *navail_p, *nrequired_p));
3483 
3484 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_init"));
3485 	return (status);
3486 }
3487 
3488 nxge_status_t
nxge_ldgv_uninit(p_nxge_t nxgep)3489 nxge_ldgv_uninit(p_nxge_t nxgep)
3490 {
3491 	p_nxge_ldgv_t ldgvp;
3492 
3493 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_uninit"));
3494 	ldgvp = nxgep->ldgvp;
3495 	if (ldgvp == NULL) {
3496 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_uninit: "
3497 		    "no logical group configured."));
3498 		return (NXGE_OK);
3499 	}
3500 	if (ldgvp->ldvp_syserr_alloced == B_TRUE) {
3501 		KMEM_FREE(ldgvp->ldvp_syserr, sizeof (nxge_ldv_t));
3502 	}
3503 	if (ldgvp->ldgp) {
3504 		KMEM_FREE(ldgvp->ldgp, sizeof (nxge_ldg_t) * ldgvp->maxldgs);
3505 	}
3506 	if (ldgvp->ldvp) {
3507 		KMEM_FREE(ldgvp->ldvp, sizeof (nxge_ldv_t) * ldgvp->maxldvs);
3508 	}
3509 	KMEM_FREE(ldgvp, sizeof (nxge_ldgv_t));
3510 	nxgep->ldgvp = NULL;
3511 
3512 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_uninit"));
3513 	return (NXGE_OK);
3514 }
3515 
3516 nxge_status_t
nxge_intr_ldgv_init(p_nxge_t nxgep)3517 nxge_intr_ldgv_init(p_nxge_t nxgep)
3518 {
3519 	nxge_status_t status = NXGE_OK;
3520 
3521 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_intr_ldgv_init"));
3522 	/*
3523 	 * Configure the logical device group numbers, state vectors and
3524 	 * interrupt masks for each logical device.
3525 	 */
3526 	status = nxge_fzc_intr_init(nxgep);
3527 
3528 	/*
3529 	 * Configure logical device masks and timers.
3530 	 */
3531 	status = nxge_intr_mask_mgmt(nxgep);
3532 
3533 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_intr_ldgv_init"));
3534 	return (status);
3535 }
3536 
3537 nxge_status_t
nxge_intr_mask_mgmt(p_nxge_t nxgep)3538 nxge_intr_mask_mgmt(p_nxge_t nxgep)
3539 {
3540 	p_nxge_ldgv_t ldgvp;
3541 	p_nxge_ldg_t ldgp;
3542 	p_nxge_ldv_t ldvp;
3543 	npi_handle_t handle;
3544 	int i, j;
3545 	npi_status_t rs = NPI_SUCCESS;
3546 
3547 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_intr_mask_mgmt"));
3548 
3549 	if ((ldgvp = nxgep->ldgvp) == NULL) {
3550 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3551 		    "<== nxge_intr_mask_mgmt: Null ldgvp"));
3552 		return (NXGE_ERROR);
3553 	}
3554 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
3555 	ldgp = ldgvp->ldgp;
3556 	ldvp = ldgvp->ldvp;
3557 	if (ldgp == NULL || ldvp == NULL) {
3558 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3559 		    "<== nxge_intr_mask_mgmt: Null ldgp or ldvp"));
3560 		return (NXGE_ERROR);
3561 	}
3562 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3563 	    "==> nxge_intr_mask_mgmt: # of intrs %d ", ldgvp->ldg_intrs));
3564 	/* Initialize masks. */
3565 	if (nxgep->niu_type != N2_NIU) {
3566 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3567 		    "==> nxge_intr_mask_mgmt(Neptune): # intrs %d ",
3568 		    ldgvp->ldg_intrs));
3569 		for (i = 0; i < ldgvp->ldg_intrs; i++, ldgp++) {
3570 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3571 			    "==> nxge_intr_mask_mgmt(Neptune): # ldv %d "
3572 			    "in group %d", ldgp->nldvs, ldgp->ldg));
3573 			for (j = 0; j < ldgp->nldvs; j++, ldvp++) {
3574 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3575 				    "==> nxge_intr_mask_mgmt: set ldv # %d "
3576 				    "for ldg %d", ldvp->ldv, ldgp->ldg));
3577 				rs = npi_intr_mask_set(handle, ldvp->ldv,
3578 				    ldvp->ldv_ldf_masks);
3579 				if (rs != NPI_SUCCESS) {
3580 					NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3581 					    "<== nxge_intr_mask_mgmt: "
3582 					    "set mask failed "
3583 					    " rs 0x%x ldv %d mask 0x%x",
3584 					    rs, ldvp->ldv,
3585 					    ldvp->ldv_ldf_masks));
3586 					return (NXGE_ERROR | rs);
3587 				}
3588 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3589 				    "==> nxge_intr_mask_mgmt: "
3590 				    "set mask OK "
3591 				    " rs 0x%x ldv %d mask 0x%x",
3592 				    rs, ldvp->ldv,
3593 				    ldvp->ldv_ldf_masks));
3594 			}
3595 		}
3596 	}
3597 	ldgp = ldgvp->ldgp;
3598 	/* Configure timer and arm bit */
3599 	for (i = 0; i < nxgep->ldgvp->ldg_intrs; i++, ldgp++) {
3600 		rs = npi_intr_ldg_mgmt_set(handle, ldgp->ldg,
3601 		    ldgp->arm, ldgp->ldg_timer);
3602 		if (rs != NPI_SUCCESS) {
3603 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3604 			    "<== nxge_intr_mask_mgmt: "
3605 			    "set timer failed "
3606 			    " rs 0x%x dg %d timer 0x%x",
3607 			    rs, ldgp->ldg, ldgp->ldg_timer));
3608 			return (NXGE_ERROR | rs);
3609 		}
3610 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3611 		    "==> nxge_intr_mask_mgmt: "
3612 		    "set timer OK "
3613 		    " rs 0x%x ldg %d timer 0x%x",
3614 		    rs, ldgp->ldg, ldgp->ldg_timer));
3615 	}
3616 
3617 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_fzc_intr_mask_mgmt"));
3618 	return (NXGE_OK);
3619 }
3620 
3621 nxge_status_t
nxge_intr_mask_mgmt_set(p_nxge_t nxgep,boolean_t on)3622 nxge_intr_mask_mgmt_set(p_nxge_t nxgep, boolean_t on)
3623 {
3624 	p_nxge_ldgv_t ldgvp;
3625 	p_nxge_ldg_t ldgp;
3626 	p_nxge_ldv_t ldvp;
3627 	npi_handle_t handle;
3628 	int i, j;
3629 	npi_status_t rs = NPI_SUCCESS;
3630 
3631 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3632 	    "==> nxge_intr_mask_mgmt_set (%d)", on));
3633 
3634 	if (nxgep->niu_type == N2_NIU) {
3635 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3636 		    "<== nxge_intr_mask_mgmt_set (%d) not set (N2/NIU)",
3637 		    on));
3638 		return (NXGE_ERROR);
3639 	}
3640 
3641 	if ((ldgvp = nxgep->ldgvp) == NULL) {
3642 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3643 		    "==> nxge_intr_mask_mgmt_set: Null ldgvp"));
3644 		return (NXGE_ERROR);
3645 	}
3646 
3647 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
3648 	ldgp = ldgvp->ldgp;
3649 	ldvp = ldgvp->ldvp;
3650 	if (ldgp == NULL || ldvp == NULL) {
3651 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3652 		    "<== nxge_intr_mask_mgmt_set: Null ldgp or ldvp"));
3653 		return (NXGE_ERROR);
3654 	}
3655 	/* set masks. */
3656 	for (i = 0; i < ldgvp->ldg_intrs; i++, ldgp++) {
3657 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3658 		    "==> nxge_intr_mask_mgmt_set: flag %d ldg %d"
3659 		    "set mask nldvs %d", on, ldgp->ldg, ldgp->nldvs));
3660 		for (j = 0; j < ldgp->nldvs; j++, ldvp++) {
3661 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3662 			    "==> nxge_intr_mask_mgmt_set: "
3663 			    "for %d %d flag %d", i, j, on));
3664 			if (on) {
3665 				ldvp->ldv_ldf_masks = 0;
3666 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3667 				    "==> nxge_intr_mask_mgmt_set: "
3668 				    "ON mask off"));
3669 			} else if (!on) {
3670 				ldvp->ldv_ldf_masks = (uint8_t)LD_IM1_MASK;
3671 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3672 				    "==> nxge_intr_mask_mgmt_set:mask on"));
3673 			}
3674 			rs = npi_intr_mask_set(handle, ldvp->ldv,
3675 			    ldvp->ldv_ldf_masks);
3676 			if (rs != NPI_SUCCESS) {
3677 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3678 				    "==> nxge_intr_mask_mgmt_set: "
3679 				    "set mask failed "
3680 				    " rs 0x%x ldv %d mask 0x%x",
3681 				    rs, ldvp->ldv, ldvp->ldv_ldf_masks));
3682 				return (NXGE_ERROR | rs);
3683 			}
3684 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3685 			    "==> nxge_intr_mask_mgmt_set: flag %d"
3686 			    "set mask OK "
3687 			    " ldv %d mask 0x%x",
3688 			    on, ldvp->ldv, ldvp->ldv_ldf_masks));
3689 		}
3690 	}
3691 
3692 	ldgp = ldgvp->ldgp;
3693 	/* set the arm bit */
3694 	for (i = 0; i < nxgep->ldgvp->ldg_intrs; i++, ldgp++) {
3695 		if (on && !ldgp->arm) {
3696 			ldgp->arm = B_TRUE;
3697 		} else if (!on && ldgp->arm) {
3698 			ldgp->arm = B_FALSE;
3699 		}
3700 		rs = npi_intr_ldg_mgmt_set(handle, ldgp->ldg,
3701 		    ldgp->arm, ldgp->ldg_timer);
3702 		if (rs != NPI_SUCCESS) {
3703 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3704 			    "<== nxge_intr_mask_mgmt_set: "
3705 			    "set timer failed "
3706 			    " rs 0x%x ldg %d timer 0x%x",
3707 			    rs, ldgp->ldg, ldgp->ldg_timer));
3708 			return (NXGE_ERROR | rs);
3709 		}
3710 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3711 		    "==> nxge_intr_mask_mgmt_set: OK (flag %d) "
3712 		    "set timer "
3713 		    " ldg %d timer 0x%x",
3714 		    on, ldgp->ldg, ldgp->ldg_timer));
3715 	}
3716 
3717 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_intr_mask_mgmt_set"));
3718 	return (NXGE_OK);
3719 }
3720 
3721 static nxge_status_t
nxge_get_mac_addr_properties(p_nxge_t nxgep)3722 nxge_get_mac_addr_properties(p_nxge_t nxgep)
3723 {
3724 #if defined(_BIG_ENDIAN)
3725 	uchar_t *prop_val;
3726 	uint_t prop_len;
3727 	uint_t j;
3728 #endif
3729 	uint_t i;
3730 	uint8_t func_num;
3731 	boolean_t compute_macs = B_TRUE;
3732 
3733 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "==> nxge_get_mac_addr_properties "));
3734 
3735 #if defined(_BIG_ENDIAN)
3736 	/*
3737 	 * Get the ethernet address.
3738 	 */
3739 	(void) localetheraddr((struct ether_addr *)NULL, &nxgep->ouraddr);
3740 
3741 	/*
3742 	 * Check if it is an adapter with its own local mac address If it is
3743 	 * present, override the system mac address.
3744 	 */
3745 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3746 	    "local-mac-address", &prop_val,
3747 	    &prop_len) == DDI_PROP_SUCCESS) {
3748 		if (prop_len == ETHERADDRL) {
3749 			nxgep->factaddr = *(p_ether_addr_t)prop_val;
3750 			NXGE_DEBUG_MSG((nxgep, DDI_CTL, "Local mac address = "
3751 			    "%02x:%02x:%02x:%02x:%02x:%02x",
3752 			    prop_val[0], prop_val[1], prop_val[2],
3753 			    prop_val[3], prop_val[4], prop_val[5]));
3754 		}
3755 		ddi_prop_free(prop_val);
3756 	}
3757 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3758 	    "local-mac-address?", &prop_val,
3759 	    &prop_len) == DDI_PROP_SUCCESS) {
3760 		if (strncmp("true", (caddr_t)prop_val, (size_t)prop_len) == 0) {
3761 			nxgep->ouraddr = nxgep->factaddr;
3762 			NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3763 			    "Using local MAC address"));
3764 		}
3765 		ddi_prop_free(prop_val);
3766 	} else {
3767 		nxgep->ouraddr = nxgep->factaddr;
3768 	}
3769 
3770 	if ((!nxgep->vpd_info.present) ||
3771 	    (nxge_is_valid_local_mac(nxgep->factaddr)))
3772 		goto got_mac_addr;
3773 
3774 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "nxge_get_mac_addr_properties: "
3775 	    "MAC address from properties is not valid...reading from PROM"));
3776 
3777 #endif
3778 	if (!nxgep->vpd_info.ver_valid) {
3779 		(void) nxge_espc_mac_addrs_get(nxgep);
3780 		if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3781 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "Failed to get "
3782 			    "MAC address"));
3783 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "EEPROM version "
3784 			    "[%s] invalid...please update",
3785 			    nxgep->vpd_info.ver));
3786 			return (NXGE_ERROR);
3787 		}
3788 		nxgep->ouraddr = nxgep->factaddr;
3789 		goto got_mac_addr;
3790 	}
3791 	/*
3792 	 * First get the MAC address from the info in the VPD data read
3793 	 * from the EEPROM.
3794 	 */
3795 	nxge_espc_get_next_mac_addr(nxgep->vpd_info.mac_addr,
3796 	    nxgep->function_num, &nxgep->factaddr);
3797 
3798 	if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3799 		NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3800 		    "nxge_get_mac_addr_properties: "
3801 		    "MAC address in EEPROM VPD data not valid"
3802 		    "...reading from NCR registers"));
3803 		(void) nxge_espc_mac_addrs_get(nxgep);
3804 		if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3805 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "Failed to get "
3806 			    "MAC address"));
3807 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "EEPROM version "
3808 			    "[%s] invalid...please update",
3809 			    nxgep->vpd_info.ver));
3810 			return (NXGE_ERROR);
3811 		}
3812 	}
3813 
3814 	nxgep->ouraddr = nxgep->factaddr;
3815 
3816 got_mac_addr:
3817 	func_num = nxgep->function_num;
3818 
3819 	/*
3820 	 * Note: mac-addresses property is the list of mac addresses for a
3821 	 * port. NXGE_MAX_MMAC_ADDRS is the total number of MAC addresses
3822 	 * allocated for a board.
3823 	 */
3824 	nxgep->nxge_mmac_info.total_factory_macs = NXGE_MAX_MMAC_ADDRS;
3825 
3826 #if defined(_BIG_ENDIAN)
3827 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3828 	    "mac-addresses", &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
3829 		/*
3830 		 * XAUI may have up to 18 MACs, more than the XMAC can
3831 		 * use (1 unique MAC plus 16 alternate MACs)
3832 		 */
3833 		nxgep->nxge_mmac_info.num_factory_mmac =
3834 		    prop_len / ETHERADDRL - 1;
3835 		if (nxgep->nxge_mmac_info.num_factory_mmac >
3836 		    XMAC_MAX_ALT_ADDR_ENTRY) {
3837 			nxgep->nxge_mmac_info.num_factory_mmac =
3838 			    XMAC_MAX_ALT_ADDR_ENTRY;
3839 		}
3840 
3841 		for (i = 1; i <= nxgep->nxge_mmac_info.num_factory_mmac; i++) {
3842 			for (j = 0; j < ETHERADDRL; j++) {
3843 				nxgep->nxge_mmac_info.factory_mac_pool[i][j] =
3844 				    *(prop_val + (i * ETHERADDRL) + j);
3845 			}
3846 			NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3847 			    "nxge_get_mac_addr_properties: Alt mac[%d] from "
3848 			    "mac-addresses property[%2x:%2x:%2x:%2x:%2x:%2x]",
3849 			    i, nxgep->nxge_mmac_info.factory_mac_pool[i][0],
3850 			    nxgep->nxge_mmac_info.factory_mac_pool[i][1],
3851 			    nxgep->nxge_mmac_info.factory_mac_pool[i][2],
3852 			    nxgep->nxge_mmac_info.factory_mac_pool[i][3],
3853 			    nxgep->nxge_mmac_info.factory_mac_pool[i][4],
3854 			    nxgep->nxge_mmac_info.factory_mac_pool[i][5]));
3855 		}
3856 
3857 		compute_macs = B_FALSE;
3858 		ddi_prop_free(prop_val);
3859 		goto got_mmac_info;
3860 	}
3861 #endif
3862 	/*
3863 	 * total_factory_macs = 32
3864 	 * num_factory_mmac = (32 >> (nports/2)) - 1
3865 	 * So if nports = 4, then num_factory_mmac =  7
3866 	 *    if nports = 2, then num_factory_mmac = 15
3867 	 */
3868 	nxgep->nxge_mmac_info.num_factory_mmac =
3869 	    ((nxgep->nxge_mmac_info.total_factory_macs >>
3870 	    (nxgep->nports >> 1))) - 1;
3871 
3872 got_mmac_info:
3873 
3874 	if ((nxgep->function_num < 2) &&
3875 	    (nxgep->nxge_mmac_info.num_factory_mmac >
3876 	    XMAC_MAX_ALT_ADDR_ENTRY)) {
3877 		nxgep->nxge_mmac_info.num_factory_mmac =
3878 		    XMAC_MAX_ALT_ADDR_ENTRY;
3879 	} else if ((nxgep->function_num > 1) &&
3880 	    (nxgep->nxge_mmac_info.num_factory_mmac >
3881 	    BMAC_MAX_ALT_ADDR_ENTRY)) {
3882 		nxgep->nxge_mmac_info.num_factory_mmac =
3883 		    BMAC_MAX_ALT_ADDR_ENTRY;
3884 	}
3885 
3886 	for (i = 0; i <= nxgep->nxge_mmac_info.num_mmac; i++) {
3887 		(void) npi_mac_altaddr_disable(nxgep->npi_handle,
3888 		    NXGE_GET_PORT_NUM(func_num), i);
3889 	}
3890 
3891 	(void) nxge_init_mmac(nxgep, compute_macs);
3892 	return (NXGE_OK);
3893 }
3894 
3895 void
nxge_get_xcvr_properties(p_nxge_t nxgep)3896 nxge_get_xcvr_properties(p_nxge_t nxgep)
3897 {
3898 	uchar_t *prop_val;
3899 	uint_t prop_len;
3900 
3901 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "==> nxge_get_xcvr_properties"));
3902 
3903 	/*
3904 	 * Read the type of physical layer interface being used.
3905 	 */
3906 	nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3907 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3908 	    "phy-type", &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
3909 		if (strncmp("pcs", (caddr_t)prop_val,
3910 		    (size_t)prop_len) == 0) {
3911 			nxgep->statsp->mac_stats.xcvr_inuse = PCS_XCVR;
3912 		} else {
3913 			nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3914 		}
3915 		ddi_prop_free(prop_val);
3916 	} else if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3917 	    "phy-interface", &prop_val,
3918 	    &prop_len) == DDI_PROP_SUCCESS) {
3919 		if (strncmp("pcs", (caddr_t)prop_val, (size_t)prop_len) == 0) {
3920 			nxgep->statsp->mac_stats.xcvr_inuse = PCS_XCVR;
3921 		} else {
3922 			nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3923 		}
3924 		ddi_prop_free(prop_val);
3925 	}
3926 }
3927 
3928 /*
3929  * Static functions start here.
3930  */
3931 
3932 static void
nxge_ldgv_setup(p_nxge_ldg_t * ldgp,p_nxge_ldv_t * ldvp,uint8_t ldv,uint8_t endldg,int * ngrps)3933 nxge_ldgv_setup(p_nxge_ldg_t *ldgp, p_nxge_ldv_t *ldvp, uint8_t ldv,
3934 	uint8_t endldg, int *ngrps)
3935 {
3936 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup"));
3937 	/* Assign the group number for each device. */
3938 	(*ldvp)->ldg_assigned = (*ldgp)->ldg;
3939 	(*ldvp)->ldgp = *ldgp;
3940 	(*ldvp)->ldv = ldv;
3941 
3942 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup: "
3943 	    "ldv %d endldg %d ldg %d, ldvp $%p",
3944 	    ldv, endldg, (*ldgp)->ldg, (*ldgp)->ldvp));
3945 
3946 	(*ldgp)->nldvs++;
3947 	if ((*ldgp)->ldg == (endldg - 1)) {
3948 		if ((*ldgp)->ldvp == NULL) {
3949 			(*ldgp)->ldvp = *ldvp;
3950 			*ngrps += 1;
3951 			NXGE_DEBUG_MSG((NULL, INT_CTL,
3952 			    "==> nxge_ldgv_setup: ngrps %d", *ngrps));
3953 		}
3954 		NXGE_DEBUG_MSG((NULL, INT_CTL,
3955 		    "==> nxge_ldgv_setup: ldvp $%p ngrps %d",
3956 		    *ldvp, *ngrps));
3957 		++*ldvp;
3958 	} else {
3959 		(*ldgp)->ldvp = *ldvp;
3960 		*ngrps += 1;
3961 		NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup(done): "
3962 		    "ldv %d endldg %d ldg %d, ldvp $%p",
3963 		    ldv, endldg, (*ldgp)->ldg, (*ldgp)->ldvp));
3964 		++*ldvp;
3965 		++*ldgp;
3966 		NXGE_DEBUG_MSG((NULL, INT_CTL,
3967 		    "==> nxge_ldgv_setup: new ngrps %d", *ngrps));
3968 	}
3969 
3970 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup: "
3971 	    "ldv %d ldvp $%p endldg %d ngrps %d",
3972 	    ldv, ldvp, endldg, *ngrps));
3973 
3974 	NXGE_DEBUG_MSG((NULL, INT_CTL, "<== nxge_ldgv_setup"));
3975 }
3976 
3977 /*
3978  * Note: This function assumes the following distribution of mac
3979  * addresses among 4 ports in neptune:
3980  *
3981  *      -------------
3982  *    0|            |0 - local-mac-address for fn 0
3983  *      -------------
3984  *    1|            |1 - local-mac-address for fn 1
3985  *      -------------
3986  *    2|            |2 - local-mac-address for fn 2
3987  *      -------------
3988  *    3|            |3 - local-mac-address for fn 3
3989  *      -------------
3990  *     |            |4 - Start of alt. mac addr. for fn 0
3991  *     |            |
3992  *     |            |
3993  *     |            |10
3994  *     --------------
3995  *     |            |11 - Start of alt. mac addr. for fn 1
3996  *     |            |
3997  *     |            |
3998  *     |            |17
3999  *     --------------
4000  *     |            |18 - Start of alt. mac addr. for fn 2
4001  *     |            |
4002  *     |            |
4003  *     |            |24
4004  *     --------------
4005  *     |            |25 - Start of alt. mac addr. for fn 3
4006  *     |            |
4007  *     |            |
4008  *     |            |31
4009  *     --------------
4010  *
4011  * For N2/NIU the mac addresses is from XAUI card.
4012  *
4013  * When 'compute_addrs' is true, the alternate mac addresses are computed
4014  * using the unique mac address as base. Otherwise the alternate addresses
4015  * are assigned from the list read off the 'mac-addresses' property.
4016  */
4017 
4018 static void
nxge_init_mmac(p_nxge_t nxgep,boolean_t compute_addrs)4019 nxge_init_mmac(p_nxge_t nxgep, boolean_t compute_addrs)
4020 {
4021 	int slot;
4022 	uint8_t func_num;
4023 	uint16_t *base_mmac_addr;
4024 	uint32_t alt_mac_ls4b;
4025 	uint16_t *mmac_addr;
4026 	uint32_t base_mac_ls4b; /* least significant 4 bytes */
4027 	nxge_mmac_t *mmac_info;
4028 	npi_mac_addr_t mac_addr;
4029 
4030 	alt_mac_ls4b = 0;
4031 	func_num = nxgep->function_num;
4032 	base_mmac_addr = (uint16_t *)&nxgep->factaddr;
4033 	mmac_info = (nxge_mmac_t *)&nxgep->nxge_mmac_info;
4034 
4035 	if (compute_addrs) {
4036 		base_mac_ls4b = ((uint32_t)base_mmac_addr[1]) << 16 |
4037 		    base_mmac_addr[2];
4038 
4039 		if (nxgep->niu_type == N2_NIU) {
4040 			/* ls4b of 1st altmac */
4041 			alt_mac_ls4b = base_mac_ls4b + 1;
4042 		} else {			/* Neptune */
4043 			alt_mac_ls4b = base_mac_ls4b +
4044 			    (nxgep->nports - func_num) +
4045 			    (func_num * (mmac_info->num_factory_mmac));
4046 		}
4047 	}
4048 
4049 	/* Set flags for unique MAC */
4050 	mmac_info->mac_pool[0].flags |= MMAC_SLOT_USED | MMAC_VENDOR_ADDR;
4051 
4052 	/* Clear flags of all alternate MAC slots */
4053 	for (slot = 1; slot <= mmac_info->num_mmac; slot++) {
4054 		if (slot <= mmac_info->num_factory_mmac)
4055 			mmac_info->mac_pool[slot].flags = MMAC_VENDOR_ADDR;
4056 		else
4057 			mmac_info->mac_pool[slot].flags = 0;
4058 	}
4059 
4060 	/* Generate and store factory alternate MACs */
4061 	for (slot = 1; slot <= mmac_info->num_factory_mmac; slot++) {
4062 		mmac_addr = (uint16_t *)&mmac_info->factory_mac_pool[slot];
4063 		if (compute_addrs) {
4064 			mmac_addr[0] = base_mmac_addr[0];
4065 			mac_addr.w2 = mmac_addr[0];
4066 
4067 			mmac_addr[1] = (alt_mac_ls4b >> 16) & 0x0FFFF;
4068 			mac_addr.w1 = mmac_addr[1];
4069 
4070 			mmac_addr[2] = alt_mac_ls4b & 0x0FFFF;
4071 			mac_addr.w0 = mmac_addr[2];
4072 
4073 			alt_mac_ls4b++;
4074 		} else {
4075 			mac_addr.w2 = mmac_addr[0];
4076 			mac_addr.w1 = mmac_addr[1];
4077 			mac_addr.w0 = mmac_addr[2];
4078 		}
4079 
4080 		NXGE_DEBUG_MSG((nxgep, DDI_CTL,
4081 		    "mac_pool_addr[%2x:%2x:%2x:%2x:%2x:%2x] npi_addr[%x%x%x]",
4082 		    mmac_info->factory_mac_pool[slot][0],
4083 		    mmac_info->factory_mac_pool[slot][1],
4084 		    mmac_info->factory_mac_pool[slot][2],
4085 		    mmac_info->factory_mac_pool[slot][3],
4086 		    mmac_info->factory_mac_pool[slot][4],
4087 		    mmac_info->factory_mac_pool[slot][5],
4088 		    mac_addr.w0, mac_addr.w1, mac_addr.w2));
4089 		/*
4090 		 * slot minus 1 because npi_mac_altaddr_entry expects 0
4091 		 * for the first alternate mac address.
4092 		 */
4093 		(void) npi_mac_altaddr_entry(nxgep->npi_handle, OP_SET,
4094 		    NXGE_GET_PORT_NUM(func_num), slot - 1, &mac_addr);
4095 	}
4096 	/* Initialize the first two parameters for mmac kstat */
4097 	nxgep->statsp->mmac_stats.mmac_max_cnt = mmac_info->num_mmac;
4098 	nxgep->statsp->mmac_stats.mmac_avail_cnt = mmac_info->num_mmac;
4099 }
4100 
4101 /*
4102  * Convert an RDC group index into a port ring index.  That is, map
4103  * <groupid> to an index into nxgep->rx_ring_handles.
4104  * (group ring index -> port ring index)
4105  */
4106 int
nxge_get_rxring_index(p_nxge_t nxgep,int groupid,int ringidx)4107 nxge_get_rxring_index(p_nxge_t nxgep, int groupid, int ringidx)
4108 {
4109 	int			i;
4110 	int			index = 0;
4111 	p_nxge_rdc_grp_t	rdc_grp_p;
4112 	p_nxge_dma_pt_cfg_t	p_dma_cfgp;
4113 	p_nxge_hw_pt_cfg_t	p_cfgp;
4114 
4115 	p_dma_cfgp = &nxgep->pt_config;
4116 	p_cfgp = &p_dma_cfgp->hw_config;
4117 
4118 	if (isLDOMguest(nxgep))
4119 		return (ringidx);
4120 
4121 	for (i = 0; i < groupid; i++) {
4122 		rdc_grp_p =
4123 		    &p_dma_cfgp->rdc_grps[p_cfgp->def_mac_rxdma_grpid + i];
4124 		index += rdc_grp_p->max_rdcs;
4125 	}
4126 
4127 	return (index + ringidx);
4128 }
4129