xref: /illumos-gate/usr/src/contrib/bhyve/sys/ata.h (revision 32640292)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 2000 - 2008 Søren Schmidt <sos@FreeBSD.org>
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer,
12  *    without modification, immediately at the beginning of the file.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27  */
28 
29 #ifndef _SYS_ATA_H_
30 #define _SYS_ATA_H_
31 
32 #include <sys/ioccom.h>
33 
34 /* ATA/ATAPI device parameters */
35 struct ata_params {
36 /*000*/ u_int16_t       config;         /* configuration info */
37 #define ATA_PROTO_MASK                  0x8003
38 #define ATA_PROTO_ATAPI                 0x8000
39 #define ATA_PROTO_ATAPI_12              0x8000
40 #define ATA_PROTO_ATAPI_16              0x8001
41 #define ATA_PROTO_CFA                   0x848a
42 #define ATA_ATAPI_TYPE_MASK             0x1f00
43 #define ATA_ATAPI_TYPE_DIRECT           0x0000  /* disk/floppy */
44 #define ATA_ATAPI_TYPE_TAPE             0x0100  /* streaming tape */
45 #define ATA_ATAPI_TYPE_CDROM            0x0500  /* CD-ROM device */
46 #define ATA_ATAPI_TYPE_OPTICAL          0x0700  /* optical disk */
47 #define ATA_ATAPI_REMOVABLE             0x0080
48 #define ATA_DRQ_MASK                    0x0060
49 #define ATA_DRQ_SLOW                    0x0000  /* cpu 3 ms delay */
50 #define ATA_DRQ_INTR                    0x0020  /* interrupt 10 ms delay */
51 #define ATA_DRQ_FAST                    0x0040  /* accel 50 us delay */
52 #define ATA_RESP_INCOMPLETE             0x0004
53 
54 /*001*/ u_int16_t       cylinders;              /* # of cylinders */
55 /*002*/ u_int16_t       specconf;		/* specific configuration */
56 /*003*/ u_int16_t       heads;                  /* # heads */
57 	u_int16_t       obsolete4;
58 	u_int16_t       obsolete5;
59 /*006*/ u_int16_t       sectors;                /* # sectors/track */
60 /*007*/ u_int16_t       vendor7[3];
61 /*010*/ u_int8_t        serial[20];             /* serial number */
62 /*020*/ u_int16_t       retired20;
63 	u_int16_t       retired21;
64 	u_int16_t       obsolete22;
65 /*023*/ u_int8_t        revision[8];            /* firmware revision */
66 /*027*/ u_int8_t        model[40];              /* model name */
67 /*047*/ u_int16_t       sectors_intr;           /* sectors per interrupt */
68 /*048*/ u_int16_t       tcg;                    /* Trusted Computing Group */
69 #define ATA_SUPPORT_TCG                 0x0001
70 /*049*/ u_int16_t       capabilities1;
71 #define ATA_SUPPORT_DMA                 0x0100
72 #define ATA_SUPPORT_LBA                 0x0200
73 #define ATA_SUPPORT_IORDYDIS            0x0400
74 #define ATA_SUPPORT_IORDY               0x0800
75 #define ATA_SUPPORT_OVERLAP             0x4000
76 
77 /*050*/ u_int16_t       capabilities2;
78 /*051*/ u_int16_t       retired_piomode;        /* PIO modes 0-2 */
79 #define ATA_RETIRED_PIO_MASK            0x0300
80 
81 /*052*/ u_int16_t       retired_dmamode;        /* DMA modes */
82 #define ATA_RETIRED_DMA_MASK            0x0003
83 
84 /*053*/ u_int16_t       atavalid;               /* fields valid */
85 #define ATA_FLAG_54_58                  0x0001  /* words 54-58 valid */
86 #define ATA_FLAG_64_70                  0x0002  /* words 64-70 valid */
87 #define ATA_FLAG_88                     0x0004  /* word 88 valid */
88 
89 /*054*/ u_int16_t       current_cylinders;
90 /*055*/ u_int16_t       current_heads;
91 /*056*/ u_int16_t       current_sectors;
92 /*057*/ u_int16_t       current_size_1;
93 /*058*/ u_int16_t       current_size_2;
94 /*059*/ u_int16_t       multi;
95 #define ATA_SUPPORT_BLOCK_ERASE_EXT     0x8000
96 #define ATA_SUPPORT_OVERWRITE_EXT       0x4000
97 #define ATA_SUPPORT_CRYPTO_SCRAMBLE_EXT 0x2000
98 #define ATA_SUPPORT_SANITIZE            0x1000
99 #define	ATA_SUPPORT_SANITIZE_ALLOWED	0x0800
100 #define	ATA_SUPPORT_ANTIFREEZE_LOCK_EXT	0x0400
101 #define ATA_MULTI_VALID                 0x0100
102 
103 /*060*/ u_int16_t       lba_size_1;
104 	u_int16_t       lba_size_2;
105 	u_int16_t       obsolete62;
106 /*063*/ u_int16_t       mwdmamodes;             /* multiword DMA modes */
107 /*064*/ u_int16_t       apiomodes;              /* advanced PIO modes */
108 
109 /*065*/ u_int16_t       mwdmamin;               /* min. M/W DMA time/word ns */
110 /*066*/ u_int16_t       mwdmarec;               /* rec. M/W DMA time ns */
111 /*067*/ u_int16_t       pioblind;               /* min. PIO cycle w/o flow */
112 /*068*/ u_int16_t       pioiordy;               /* min. PIO cycle IORDY flow */
113 /*069*/ u_int16_t       support3;
114 #define ATA_SUPPORT_RZAT                0x0020
115 #define ATA_SUPPORT_DRAT                0x4000
116 #define ATA_ENCRYPTS_ALL_USER_DATA      0x0010  /* Self-encrypting drive */
117 #define	ATA_SUPPORT_ZONE_MASK		0x0003
118 #define	ATA_SUPPORT_ZONE_NR		0x0000
119 #define	ATA_SUPPORT_ZONE_HOST_AWARE	0x0001
120 #define	ATA_SUPPORT_ZONE_DEV_MANAGED	0x0002
121 	u_int16_t       reserved70;
122 /*071*/ u_int16_t       rlsovlap;               /* rel time (us) for overlap */
123 /*072*/ u_int16_t       rlsservice;             /* rel time (us) for service */
124 	u_int16_t       reserved73;
125 	u_int16_t       reserved74;
126 /*075*/ u_int16_t       queue;
127 #define ATA_QUEUE_LEN(x)                ((x) & 0x001f)
128 
129 /*76*/  u_int16_t       satacapabilities;
130 #define ATA_SATA_GEN1                   0x0002
131 #define ATA_SATA_GEN2                   0x0004
132 #define ATA_SATA_GEN3                   0x0008
133 #define ATA_SUPPORT_NCQ                 0x0100
134 #define ATA_SUPPORT_IFPWRMNGTRCV        0x0200
135 #define ATA_SUPPORT_PHYEVENTCNT         0x0400
136 #define ATA_SUPPORT_NCQ_UNLOAD          0x0800
137 #define ATA_SUPPORT_NCQ_PRIO            0x1000
138 #define ATA_SUPPORT_HAPST               0x2000
139 #define ATA_SUPPORT_DAPST               0x4000
140 #define ATA_SUPPORT_READLOGDMAEXT       0x8000
141 
142 /*77*/  u_int16_t       satacapabilities2;
143 #define ATA_SATA_CURR_GEN_MASK          0x0006
144 #define ATA_SUPPORT_NCQ_STREAM          0x0010
145 #define ATA_SUPPORT_NCQ_NON_DATA        0x0020
146 #define ATA_SUPPORT_NCQ_QMANAGEMENT     ATA_SUPPORT_NCQ_NON_DATA
147 #define ATA_SUPPORT_RCVSND_FPDMA_QUEUED 0x0040
148 /*78*/  u_int16_t       satasupport;
149 #define ATA_SUPPORT_NONZERO             0x0002
150 #define ATA_SUPPORT_AUTOACTIVATE        0x0004
151 #define ATA_SUPPORT_IFPWRMNGT           0x0008
152 #define ATA_SUPPORT_INORDERDATA         0x0010
153 #define ATA_SUPPORT_ASYNCNOTIF          0x0020
154 #define ATA_SUPPORT_SOFTSETPRESERVE     0x0040
155 #define ATA_SUPPORT_NCQ_AUTOSENSE       0x0080
156 /*79*/  u_int16_t       sataenabled;
157 #define ATA_ENABLED_DAPST               0x0080
158 
159 /*080*/ u_int16_t       version_major;
160 /*081*/ u_int16_t       version_minor;
161 
162 	struct {
163 /*082/085*/ u_int16_t   command1;
164 #define ATA_SUPPORT_SMART               0x0001
165 #define ATA_SUPPORT_SECURITY            0x0002
166 #define ATA_SUPPORT_REMOVABLE           0x0004
167 #define ATA_SUPPORT_POWERMGT            0x0008
168 #define ATA_SUPPORT_PACKET              0x0010
169 #define ATA_SUPPORT_WRITECACHE          0x0020
170 #define ATA_SUPPORT_LOOKAHEAD           0x0040
171 #define ATA_SUPPORT_RELEASEIRQ          0x0080
172 #define ATA_SUPPORT_SERVICEIRQ          0x0100
173 #define ATA_SUPPORT_RESET               0x0200
174 #define ATA_SUPPORT_PROTECTED           0x0400
175 #define ATA_SUPPORT_WRITEBUFFER         0x1000
176 #define ATA_SUPPORT_READBUFFER          0x2000
177 #define ATA_SUPPORT_NOP                 0x4000
178 
179 /*083/086*/ u_int16_t   command2;
180 #define ATA_SUPPORT_MICROCODE           0x0001
181 #define ATA_SUPPORT_QUEUED              0x0002
182 #define ATA_SUPPORT_CFA                 0x0004
183 #define ATA_SUPPORT_APM                 0x0008
184 #define ATA_SUPPORT_NOTIFY              0x0010
185 #define ATA_SUPPORT_STANDBY             0x0020
186 #define ATA_SUPPORT_SPINUP              0x0040
187 #define ATA_SUPPORT_MAXSECURITY         0x0100
188 #define ATA_SUPPORT_AUTOACOUSTIC        0x0200
189 #define ATA_SUPPORT_ADDRESS48           0x0400
190 #define ATA_SUPPORT_OVERLAY             0x0800
191 #define ATA_SUPPORT_FLUSHCACHE          0x1000
192 #define ATA_SUPPORT_FLUSHCACHE48        0x2000
193 
194 /*084/087*/ u_int16_t   extension;
195 #define ATA_SUPPORT_SMARTLOG		0x0001
196 #define ATA_SUPPORT_SMARTTEST		0x0002
197 #define ATA_SUPPORT_MEDIASN		0x0004
198 #define ATA_SUPPORT_MEDIAPASS		0x0008
199 #define ATA_SUPPORT_STREAMING		0x0010
200 #define ATA_SUPPORT_GENLOG		0x0020
201 #define ATA_SUPPORT_WRITEDMAFUAEXT	0x0040
202 #define ATA_SUPPORT_WRITEDMAQFUAEXT	0x0080
203 #define ATA_SUPPORT_64BITWWN		0x0100
204 #define ATA_SUPPORT_UNLOAD		0x2000
205 	} __packed support, enabled;
206 
207 /*088*/ u_int16_t       udmamodes;              /* UltraDMA modes */
208 /*089*/ u_int16_t       erase_time;             /* time req'd in 2min units */
209 /*090*/ u_int16_t       enhanced_erase_time;    /* time req'd in 2min units */
210 /*091*/ u_int16_t       apm_value;
211 /*092*/ u_int16_t       master_passwd_revision; /* password revision code */
212 /*093*/ u_int16_t       hwres;
213 #define ATA_CABLE_ID                    0x2000
214 
215 /*094*/ u_int16_t       acoustic;
216 #define ATA_ACOUSTIC_CURRENT(x)         ((x) & 0x00ff)
217 #define ATA_ACOUSTIC_VENDOR(x)          (((x) & 0xff00) >> 8)
218 
219 /*095*/ u_int16_t       stream_min_req_size;
220 /*096*/ u_int16_t       stream_transfer_time;
221 /*097*/ u_int16_t       stream_access_latency;
222 /*098*/ u_int32_t       stream_granularity;
223 /*100*/ u_int16_t       lba_size48_1;
224 	u_int16_t       lba_size48_2;
225 	u_int16_t       lba_size48_3;
226 	u_int16_t       lba_size48_4;
227 	u_int16_t       reserved104;
228 /*105*/	u_int16_t       max_dsm_blocks;
229 /*106*/	u_int16_t       pss;
230 #define ATA_PSS_LSPPS			0x000F
231 #define ATA_PSS_LSSABOVE512		0x1000
232 #define ATA_PSS_MULTLS			0x2000
233 #define ATA_PSS_VALID_MASK		0xC000
234 #define ATA_PSS_VALID_VALUE		0x4000
235 /*107*/ u_int16_t       isd;
236 /*108*/ u_int16_t       wwn[4];
237 	u_int16_t       reserved112[5];
238 /*117*/ u_int16_t       lss_1;
239 /*118*/ u_int16_t       lss_2;
240 /*119*/ u_int16_t       support2;
241 #define ATA_SUPPORT_WRITEREADVERIFY	0x0002
242 #define ATA_SUPPORT_WRITEUNCORREXT	0x0004
243 #define ATA_SUPPORT_RWLOGDMAEXT		0x0008
244 #define ATA_SUPPORT_MICROCODE3		0x0010
245 #define ATA_SUPPORT_FREEFALL		0x0020
246 #define ATA_SUPPORT_SENSE_REPORT	0x0040
247 #define ATA_SUPPORT_EPC			0x0080
248 #define ATA_SUPPORT_AMAX_ADDR		0x0100
249 #define ATA_SUPPORT_DSN			0x0200
250 /*120*/ u_int16_t       enabled2;
251 #define ATA_ENABLED_WRITEREADVERIFY	0x0002
252 #define ATA_ENABLED_WRITEUNCORREXT	0x0004
253 #define ATA_ENABLED_FREEFALL		0x0020
254 #define ATA_ENABLED_SENSE_REPORT	0x0040
255 #define ATA_ENABLED_EPC			0x0080
256 #define ATA_ENABLED_DSN			0x0200
257 	u_int16_t       reserved121[6];
258 /*127*/ u_int16_t       removable_status;
259 /*128*/ u_int16_t       security_status;
260 #define ATA_SECURITY_LEVEL		0x0100	/* 0: high, 1: maximum */
261 #define ATA_SECURITY_ENH_SUPP		0x0020	/* enhanced erase supported */
262 #define ATA_SECURITY_COUNT_EXP		0x0010	/* count expired */
263 #define ATA_SECURITY_FROZEN		0x0008	/* security config is frozen */
264 #define ATA_SECURITY_LOCKED		0x0004	/* drive is locked */
265 #define ATA_SECURITY_ENABLED		0x0002	/* ATA Security is enabled */
266 #define ATA_SECURITY_SUPPORTED		0x0001	/* ATA Security is supported */
267 
268 	u_int16_t       reserved129[31];
269 /*160*/ u_int16_t       cfa_powermode1;
270 	u_int16_t       reserved161;
271 /*162*/ u_int16_t       cfa_kms_support;
272 /*163*/ u_int16_t       cfa_trueide_modes;
273 /*164*/ u_int16_t       cfa_memory_modes;
274 	u_int16_t       reserved165[3];
275 /*168*/ u_int16_t       form_factor;
276 #define ATA_FORM_FACTOR_MASK		0x000f
277 #define ATA_FORM_FACTOR_NOT_REPORTED	0x0000
278 #define ATA_FORM_FACTOR_5_25		0x0001
279 #define ATA_FORM_FACTOR_3_5		0x0002
280 #define ATA_FORM_FACTOR_2_5		0x0003
281 #define ATA_FORM_FACTOR_1_8		0x0004
282 #define ATA_FORM_FACTOR_SUB_1_8		0x0005
283 #define ATA_FORM_FACTOR_MSATA		0x0006
284 #define ATA_FORM_FACTOR_M_2		0x0007
285 #define ATA_FORM_FACTOR_MICRO_SSD	0x0008
286 #define ATA_FORM_FACTOR_C_FAST		0x0009
287 /*169*/	u_int16_t       support_dsm;
288 #define ATA_SUPPORT_DSM_TRIM		0x0001
289 /*170*/ u_int8_t        product_id[8];	/* Additional Product Identifier */
290 	u_int16_t       reserved174[2];
291 /*176*/ u_int8_t        media_serial[60];
292 /*206*/ u_int16_t       sct;
293 	u_int16_t       reserved207[2];
294 /*209*/ u_int16_t       lsalign;
295 /*210*/ u_int16_t       wrv_sectors_m3_1;
296 	u_int16_t       wrv_sectors_m3_2;
297 /*212*/ u_int16_t       wrv_sectors_m2_1;
298 	u_int16_t       wrv_sectors_m2_2;
299 /*214*/ u_int16_t       nv_cache_caps;
300 /*215*/ u_int16_t       nv_cache_size_1;
301 	u_int16_t       nv_cache_size_2;
302 /*217*/ u_int16_t       media_rotation_rate;
303 #define ATA_RATE_NOT_REPORTED		0x0000
304 #define ATA_RATE_NON_ROTATING		0x0001
305 	u_int16_t       reserved218;
306 /*219*/ u_int16_t       nv_cache_opt;
307 /*220*/ u_int16_t       wrv_mode;
308 	u_int16_t       reserved221;
309 /*222*/ u_int16_t       transport_major;
310 /*223*/ u_int16_t       transport_minor;
311 	u_int16_t       reserved224[31];
312 /*255*/ u_int16_t       integrity;
313 } __packed __aligned(2);
314 
315 /* ATA Dataset Management */
316 #define ATA_DSM_BLK_SIZE	512
317 #define ATA_DSM_BLK_RANGES	64
318 #define ATA_DSM_RANGE_SIZE	8
319 #define ATA_DSM_RANGE_MAX	65535
320 
321 /*
322  * ATA Device Register
323  *
324  * bit 7 Obsolete (was 1 in early ATA specs)
325  * bit 6 Sets LBA/CHS mode. 1=LBA, 0=CHS
326  * bit 5 Obsolete (was 1 in early ATA specs)
327  * bit 4 1 = Slave Drive, 0 = Master Drive
328  * bit 3-0 In LBA mode, 27-24 of address. In CHS mode, head number
329 */
330 
331 #define ATA_DEV_MASTER		0x00
332 #define ATA_DEV_SLAVE		0x10
333 #define ATA_DEV_LBA		0x40
334 
335 /* ATA limits */
336 #define ATA_MAX_28BIT_LBA	268435455UL
337 
338 /* ATA Status Register */
339 #define ATA_STATUS_ERROR		0x01
340 #define ATA_STATUS_SENSE_AVAIL		0x02
341 #define ATA_STATUS_ALIGN_ERR		0x04
342 #define ATA_STATUS_DATA_REQ		0x08
343 #define ATA_STATUS_DEF_WRITE_ERR	0x10
344 #define ATA_STATUS_DEVICE_FAULT		0x20
345 #define ATA_STATUS_DEVICE_READY		0x40
346 #define ATA_STATUS_BUSY			0x80
347 
348 /* ATA Error Register */
349 #define ATA_ERROR_ABORT		0x04
350 #define ATA_ERROR_ID_NOT_FOUND	0x10
351 
352 /* ATA HPA Features */
353 #define ATA_HPA_FEAT_MAX_ADDR	0x00
354 #define ATA_HPA_FEAT_SET_PWD	0x01
355 #define ATA_HPA_FEAT_LOCK	0x02
356 #define ATA_HPA_FEAT_UNLOCK	0x03
357 #define ATA_HPA_FEAT_FREEZE	0x04
358 
359 /* ATA transfer modes */
360 #define ATA_MODE_MASK           0x0f
361 #define ATA_DMA_MASK            0xf0
362 #define ATA_PIO                 0x00
363 #define ATA_PIO0                0x08
364 #define ATA_PIO1                0x09
365 #define ATA_PIO2                0x0a
366 #define ATA_PIO3                0x0b
367 #define ATA_PIO4                0x0c
368 #define ATA_PIO_MAX             0x0f
369 #define ATA_DMA                 0x10
370 #define ATA_WDMA0               0x20
371 #define ATA_WDMA1               0x21
372 #define ATA_WDMA2               0x22
373 #define ATA_UDMA0               0x40
374 #define ATA_UDMA1               0x41
375 #define ATA_UDMA2               0x42
376 #define ATA_UDMA3               0x43
377 #define ATA_UDMA4               0x44
378 #define ATA_UDMA5               0x45
379 #define ATA_UDMA6               0x46
380 #define ATA_SA150               0x47
381 #define ATA_SA300               0x48
382 #define ATA_SA600               0x49
383 #define ATA_DMA_MAX             0x4f
384 
385 /* ATA commands */
386 #define ATA_NOP                         0x00    /* NOP */
387 #define         ATA_NF_FLUSHQUEUE       0x00    /* flush queued cmd's */
388 #define         ATA_NF_AUTOPOLL         0x01    /* start autopoll function */
389 #define ATA_DATA_SET_MANAGEMENT		0x06
390 #define 	ATA_DSM_TRIM		0x01
391 #define ATA_DEVICE_RESET                0x08    /* reset device */
392 #define ATA_READ                        0x20    /* read */
393 #define ATA_READ48                      0x24    /* read 48bit LBA */
394 #define ATA_READ_DMA48                  0x25    /* read DMA 48bit LBA */
395 #define ATA_READ_DMA_QUEUED48           0x26    /* read DMA QUEUED 48bit LBA */
396 #define ATA_READ_NATIVE_MAX_ADDRESS48   0x27    /* read native max addr 48bit */
397 #define ATA_READ_MUL48                  0x29    /* read multi 48bit LBA */
398 #define ATA_READ_STREAM_DMA48           0x2a    /* read DMA stream 48bit LBA */
399 #define ATA_READ_LOG_EXT                0x2f    /* read log ext - PIO Data-In */
400 #define ATA_READ_STREAM48               0x2b    /* read stream 48bit LBA */
401 #define ATA_WRITE                       0x30    /* write */
402 #define ATA_WRITE48                     0x34    /* write 48bit LBA */
403 #define ATA_WRITE_DMA48                 0x35    /* write DMA 48bit LBA */
404 #define ATA_WRITE_DMA_QUEUED48          0x36    /* write DMA QUEUED 48bit LBA*/
405 #define ATA_SET_MAX_ADDRESS48           0x37    /* set max address 48bit */
406 #define ATA_WRITE_MUL48                 0x39    /* write multi 48bit LBA */
407 #define ATA_WRITE_STREAM_DMA48          0x3a
408 #define ATA_WRITE_STREAM48              0x3b
409 #define ATA_WRITE_DMA_FUA48             0x3d
410 #define ATA_WRITE_DMA_QUEUED_FUA48      0x3e
411 #define ATA_WRITE_LOG_EXT               0x3f
412 #define ATA_READ_VERIFY                 0x40
413 #define ATA_READ_VERIFY48               0x42
414 #define ATA_WRITE_UNCORRECTABLE48       0x45    /* write uncorrectable 48bit LBA */
415 #define         ATA_WU_PSEUDO           0x55    /* pseudo-uncorrectable error */
416 #define         ATA_WU_FLAGGED          0xaa    /* flagged-uncorrectable error */
417 #define ATA_READ_LOG_DMA_EXT            0x47    /* read log DMA ext - PIO Data-In */
418 #define	ATA_ZAC_MANAGEMENT_IN		0x4a	/* ZAC management in */
419 #define		ATA_ZM_REPORT_ZONES	0x00	/* report zones */
420 #define	ATA_WRITE_LOG_DMA_EXT		0x57	/* WRITE LOG DMA EXT */
421 #define	ATA_TRUSTED_NON_DATA		0x5b	/* TRUSTED NON-DATA */
422 #define	ATA_TRUSTED_RECEIVE		0x5c	/* TRUSTED RECEIVE */
423 #define	ATA_TRUSTED_RECEIVE_DMA		0x5d	/* TRUSTED RECEIVE DMA */
424 #define	ATA_TRUSTED_SEND		0x5e	/* TRUSTED SEND */
425 #define	ATA_TRUSTED_SEND_DMA		0x5f	/* TRUSTED SEND DMA */
426 #define ATA_READ_FPDMA_QUEUED           0x60    /* read DMA NCQ */
427 #define ATA_WRITE_FPDMA_QUEUED          0x61    /* write DMA NCQ */
428 #define ATA_NCQ_NON_DATA		0x63	/* NCQ non-data command */
429 #define		ATA_ABORT_NCQ_QUEUE	0x00	/* abort NCQ queue */
430 #define		ATA_DEADLINE_HANDLING	0x01	/* deadline handling */
431 #define		ATA_SET_FEATURES	0x05	/* set features */
432 #define		ATA_ZERO_EXT		0x06	/* zero ext */
433 #define		ATA_NCQ_ZAC_MGMT_OUT	0x07	/* NCQ ZAC mgmt out no data */
434 #define ATA_SEND_FPDMA_QUEUED           0x64    /* send DMA NCQ */
435 #define		ATA_SFPDMA_DSM		0x00	/* Data set management */
436 #define			ATA_SFPDMA_DSM_TRIM	0x01	/* Set trim bit in auxiliary */
437 #define		ATA_SFPDMA_HYBRID_EVICT	0x01	/* Hybrid Evict */
438 #define		ATA_SFPDMA_WLDMA	0x02	/* Write Log DMA EXT */
439 #define		ATA_SFPDMA_ZAC_MGMT_OUT	0x03	/* NCQ ZAC mgmt out w/data */
440 #define ATA_RECV_FPDMA_QUEUED           0x65    /* receive DMA NCQ */
441 #define		ATA_RFPDMA_RL_DMA_EXT	0x00	/* Read Log DMA EXT */
442 #define		ATA_RFPDMA_ZAC_MGMT_IN	0x02	/* NCQ ZAC mgmt in w/data */
443 #define ATA_SEP_ATTN                    0x67    /* SEP request */
444 #define ATA_SEEK                        0x70    /* seek */
445 #define	ATA_AMAX_ADDR			0x78	/* Accessible Max Address */
446 #define		ATA_AMAX_ADDR_GET	0x00	/* GET NATIVE MAX ADDRESS EXT */
447 #define		ATA_AMAX_ADDR_SET	0x01	/* SET ACCESSIBLE MAX ADDRESS EXT */
448 #define		ATA_AMAX_ADDR_FREEZE	0x02	/* FREEZE ACCESSIBLE MAX ADDRESS EXT */
449 #define	ATA_ZAC_MANAGEMENT_OUT		0x9f	/* ZAC management out */
450 #define		ATA_ZM_CLOSE_ZONE	0x01	/* close zone */
451 #define		ATA_ZM_FINISH_ZONE	0x02	/* finish zone */
452 #define		ATA_ZM_OPEN_ZONE	0x03	/* open zone */
453 #define		ATA_ZM_RWP		0x04	/* reset write pointer */
454 #define	ATA_DOWNLOAD_MICROCODE		0x92	/* DOWNLOAD MICROCODE */
455 #define	ATA_DOWNLOAD_MICROCODE_DMA	0x93	/* DOWNLOAD MICROCODE DMA */
456 #define ATA_PACKET_CMD                  0xa0    /* packet command */
457 #define ATA_ATAPI_IDENTIFY              0xa1    /* get ATAPI params*/
458 #define ATA_SERVICE                     0xa2    /* service command */
459 #define ATA_SMART_CMD                   0xb0    /* SMART command */
460 #define	ATA_SANITIZE			0xb4	/* sanitize device */
461 #define ATA_CFA_ERASE                   0xc0    /* CFA erase */
462 #define ATA_READ_MUL                    0xc4    /* read multi */
463 #define ATA_WRITE_MUL                   0xc5    /* write multi */
464 #define ATA_SET_MULTI                   0xc6    /* set multi size */
465 #define ATA_READ_DMA_QUEUED             0xc7    /* read DMA QUEUED */
466 #define ATA_READ_DMA                    0xc8    /* read DMA */
467 #define ATA_WRITE_DMA                   0xca    /* write DMA */
468 #define ATA_WRITE_DMA_QUEUED            0xcc    /* write DMA QUEUED */
469 #define ATA_WRITE_MUL_FUA48             0xce
470 #define ATA_STANDBY_IMMEDIATE           0xe0    /* standby immediate */
471 #define ATA_IDLE_IMMEDIATE              0xe1    /* idle immediate */
472 #define ATA_STANDBY_CMD                 0xe2    /* standby */
473 #define ATA_IDLE_CMD                    0xe3    /* idle */
474 #define ATA_READ_BUFFER                 0xe4    /* read buffer */
475 #define ATA_READ_PM                     0xe4    /* read portmultiplier */
476 #define ATA_CHECK_POWER_MODE            0xe5    /* device power mode */
477 #define ATA_SLEEP                       0xe6    /* sleep */
478 #define ATA_FLUSHCACHE                  0xe7    /* flush cache to disk */
479 #define	ATA_WRITE_BUFFER		0xe8    /* write buffer */
480 #define ATA_WRITE_PM                    0xe8    /* write portmultiplier */
481 #define	ATA_READ_BUFFER_DMA		0xe9    /* read buffer DMA */
482 #define ATA_FLUSHCACHE48                0xea    /* flush cache to disk */
483 #define	ATA_WRITE_BUFFER_DMA		0xeb    /* write buffer DMA */
484 #define ATA_ATA_IDENTIFY                0xec    /* get ATA params */
485 #define ATA_SETFEATURES                 0xef    /* features command */
486 #define         ATA_SF_ENAB_WCACHE      0x02    /* enable write cache */
487 #define         ATA_SF_DIS_WCACHE       0x82    /* disable write cache */
488 #define         ATA_SF_SETXFER          0x03    /* set transfer mode */
489 #define		ATA_SF_APM		0x05	/* Enable APM feature set */
490 #define         ATA_SF_ENAB_PUIS        0x06    /* enable PUIS */
491 #define         ATA_SF_DIS_PUIS         0x86    /* disable PUIS */
492 #define         ATA_SF_PUIS_SPINUP      0x07    /* PUIS spin-up */
493 #define		ATA_SF_WRV		0x0b	/* Enable Write-Read-Verify */
494 #define 	ATA_SF_DLC		0x0c	/* Enable device life control */
495 #define 	ATA_SF_SATA		0x10	/* Enable use of SATA feature */
496 #define 	ATA_SF_FFC		0x41	/* Free-fall Control */
497 #define 	ATA_SF_MHIST		0x43	/* Set Max Host Sect. Times */
498 #define 	ATA_SF_RATE		0x45	/* Set Rate Basis */
499 #define 	ATA_SF_EPC		0x4A	/* Extended Power Conditions */
500 #define         ATA_SF_ENAB_RCACHE      0xaa    /* enable readahead cache */
501 #define         ATA_SF_DIS_RCACHE       0x55    /* disable readahead cache */
502 #define         ATA_SF_ENAB_RELIRQ      0x5d    /* enable release interrupt */
503 #define         ATA_SF_DIS_RELIRQ       0xdd    /* disable release interrupt */
504 #define         ATA_SF_ENAB_SRVIRQ      0x5e    /* enable service interrupt */
505 #define         ATA_SF_DIS_SRVIRQ       0xde    /* disable service interrupt */
506 #define 	ATA_SF_LPSAERC		0x62	/* Long Phys Sect Align ErrRep*/
507 #define 	ATA_SF_DSN		0x63	/* Device Stats Notification */
508 #define ATA_SECURITY_SET_PASSWORD       0xf1    /* set drive password */
509 #define ATA_SECURITY_UNLOCK             0xf2    /* unlock drive using passwd */
510 #define ATA_SECURITY_ERASE_PREPARE      0xf3    /* prepare to erase drive */
511 #define ATA_SECURITY_ERASE_UNIT         0xf4    /* erase all blocks on drive */
512 #define ATA_SECURITY_FREEZE_LOCK        0xf5    /* freeze security config */
513 #define ATA_SECURITY_DISABLE_PASSWORD   0xf6    /* disable drive password */
514 #define ATA_READ_NATIVE_MAX_ADDRESS     0xf8    /* read native max address */
515 #define ATA_SET_MAX_ADDRESS             0xf9    /* set max address */
516 
517 /* ATAPI commands */
518 #define ATAPI_TEST_UNIT_READY           0x00    /* check if device is ready */
519 #define ATAPI_REZERO                    0x01    /* rewind */
520 #define ATAPI_REQUEST_SENSE             0x03    /* get sense data */
521 #define ATAPI_FORMAT                    0x04    /* format unit */
522 #define ATAPI_READ                      0x08    /* read data */
523 #define ATAPI_WRITE                     0x0a    /* write data */
524 #define ATAPI_WEOF                      0x10    /* write filemark */
525 #define         ATAPI_WF_WRITE          0x01
526 #define ATAPI_SPACE                     0x11    /* space command */
527 #define         ATAPI_SP_FM             0x01
528 #define         ATAPI_SP_EOD            0x03
529 #define ATAPI_INQUIRY			0x12	/* get inquiry data */
530 #define ATAPI_MODE_SELECT               0x15    /* mode select */
531 #define ATAPI_ERASE                     0x19    /* erase */
532 #define ATAPI_MODE_SENSE                0x1a    /* mode sense */
533 #define ATAPI_START_STOP                0x1b    /* start/stop unit */
534 #define         ATAPI_SS_LOAD           0x01
535 #define         ATAPI_SS_RETENSION      0x02
536 #define         ATAPI_SS_EJECT          0x04
537 #define ATAPI_PREVENT_ALLOW             0x1e    /* media removal */
538 #define ATAPI_READ_FORMAT_CAPACITIES    0x23    /* get format capacities */
539 #define ATAPI_READ_CAPACITY             0x25    /* get volume capacity */
540 #define ATAPI_READ_BIG                  0x28    /* read data */
541 #define ATAPI_WRITE_BIG                 0x2a    /* write data */
542 #define ATAPI_LOCATE                    0x2b    /* locate to position */
543 #define ATAPI_READ_POSITION             0x34    /* read position */
544 #define ATAPI_SYNCHRONIZE_CACHE         0x35    /* flush buf, close channel */
545 #define ATAPI_WRITE_BUFFER              0x3b    /* write device buffer */
546 #define ATAPI_READ_BUFFER               0x3c    /* read device buffer */
547 #define ATAPI_READ_SUBCHANNEL           0x42    /* get subchannel info */
548 #define ATAPI_READ_TOC                  0x43    /* get table of contents */
549 #define ATAPI_PLAY_10                   0x45    /* play by lba */
550 #define ATAPI_PLAY_MSF                  0x47    /* play by MSF address */
551 #define ATAPI_PLAY_TRACK                0x48    /* play by track number */
552 #define ATAPI_PAUSE                     0x4b    /* pause audio operation */
553 #define ATAPI_READ_DISK_INFO            0x51    /* get disk info structure */
554 #define ATAPI_READ_TRACK_INFO           0x52    /* get track info structure */
555 #define ATAPI_RESERVE_TRACK             0x53    /* reserve track */
556 #define ATAPI_SEND_OPC_INFO             0x54    /* send OPC structurek */
557 #define ATAPI_MODE_SELECT_BIG           0x55    /* set device parameters */
558 #define ATAPI_REPAIR_TRACK              0x58    /* repair track */
559 #define ATAPI_READ_MASTER_CUE           0x59    /* read master CUE info */
560 #define ATAPI_MODE_SENSE_BIG            0x5a    /* get device parameters */
561 #define ATAPI_CLOSE_TRACK               0x5b    /* close track/session */
562 #define ATAPI_READ_BUFFER_CAPACITY      0x5c    /* get buffer capicity */
563 #define ATAPI_SEND_CUE_SHEET            0x5d    /* send CUE sheet */
564 #define ATAPI_SERVICE_ACTION_IN         0x96	/* get service data */
565 #define ATAPI_BLANK                     0xa1    /* blank the media */
566 #define ATAPI_SEND_KEY                  0xa3    /* send DVD key structure */
567 #define ATAPI_REPORT_KEY                0xa4    /* get DVD key structure */
568 #define ATAPI_PLAY_12                   0xa5    /* play by lba */
569 #define ATAPI_LOAD_UNLOAD               0xa6    /* changer control command */
570 #define ATAPI_READ_STRUCTURE            0xad    /* get DVD structure */
571 #define ATAPI_PLAY_CD                   0xb4    /* universal play command */
572 #define ATAPI_SET_SPEED                 0xbb    /* set drive speed */
573 #define ATAPI_MECH_STATUS               0xbd    /* get changer status */
574 #define ATAPI_READ_CD                   0xbe    /* read data */
575 #define ATAPI_POLL_DSC                  0xff    /* poll DSC status bit */
576 
577 struct ata_ioc_devices {
578     int                 channel;
579     char                name[2][32];
580     struct ata_params   params[2];
581 };
582 
583 /* pr channel ATA ioctl calls */
584 #define IOCATAGMAXCHANNEL       _IOR('a',  1, int)
585 #define IOCATAREINIT            _IOW('a',  2, int)
586 #define IOCATAATTACH            _IOW('a',  3, int)
587 #define IOCATADETACH            _IOW('a',  4, int)
588 #define IOCATADEVICES           _IOWR('a',  5, struct ata_ioc_devices)
589 
590 /* ATAPI request sense structure */
591 struct atapi_sense {
592     u_int8_t	error;				/* current or deferred errors */
593 #define	ATA_SENSE_VALID			0x80
594 
595     u_int8_t	segment;			/* segment number */
596     u_int8_t	key;				/* sense key */
597 #define ATA_SENSE_KEY_MASK		0x0f    /* sense key mask */
598 #define ATA_SENSE_NO_SENSE		0x00    /* no specific sense key info */
599 #define ATA_SENSE_RECOVERED_ERROR 	0x01    /* command OK, data recovered */
600 #define ATA_SENSE_NOT_READY		0x02    /* no access to drive */
601 #define ATA_SENSE_MEDIUM_ERROR		0x03    /* non-recovered data error */
602 #define ATA_SENSE_HARDWARE_ERROR	0x04    /* non-recoverable HW failure */
603 #define ATA_SENSE_ILLEGAL_REQUEST	0x05    /* invalid command param(s) */
604 #define ATA_SENSE_UNIT_ATTENTION	0x06    /* media changed */
605 #define ATA_SENSE_DATA_PROTECT		0x07    /* write protect */
606 #define ATA_SENSE_BLANK_CHECK		0x08    /* blank check */
607 #define ATA_SENSE_VENDOR_SPECIFIC	0x09    /* vendor specific skey */
608 #define ATA_SENSE_COPY_ABORTED		0x0a    /* copy aborted */
609 #define ATA_SENSE_ABORTED_COMMAND	0x0b    /* command aborted, try again */
610 #define ATA_SENSE_EQUAL			0x0c    /* equal */
611 #define ATA_SENSE_VOLUME_OVERFLOW	0x0d    /* volume overflow */
612 #define ATA_SENSE_MISCOMPARE		0x0e    /* data dont match the medium */
613 #define ATA_SENSE_RESERVED		0x0f
614 #define	ATA_SENSE_ILI			0x20;
615 #define	ATA_SENSE_EOM			0x40;
616 #define	ATA_SENSE_FILEMARK		0x80;
617 
618     u_int32_t   cmd_info;		/* cmd information */
619     u_int8_t	sense_length;		/* additional sense len (n-7) */
620     u_int32_t   cmd_specific_info;	/* additional cmd spec info */
621     u_int8_t    asc;			/* additional sense code */
622     u_int8_t    ascq;			/* additional sense code qual */
623     u_int8_t    replaceable_unit_code;	/* replaceable unit code */
624     u_int8_t	specific;		/* sense key specific */
625 #define	ATA_SENSE_SPEC_VALID	0x80
626 #define	ATA_SENSE_SPEC_MASK	0x7f
627 
628     u_int8_t	specific1;		/* sense key specific */
629     u_int8_t	specific2;		/* sense key specific */
630 } __packed;
631 
632 /*
633  * SET FEATURES subcommands
634  */
635 
636 /*
637  * SET FEATURES command
638  * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
639  * These values go in the LBA 3:0.
640  */
641 #define ATA_SF_EPC_RESTORE	0x00	/* Restore Power Condition Settings */
642 #define ATA_SF_EPC_GOTO		0x01	/* Go To Power Condition */
643 #define ATA_SF_EPC_SET_TIMER	0x02	/* Set Power Condition Timer */
644 #define ATA_SF_EPC_SET_STATE	0x03	/* Set Power Condition State */
645 #define ATA_SF_EPC_ENABLE	0x04	/* Enable the EPC feature set */
646 #define ATA_SF_EPC_DISABLE	0x05	/* Disable the EPC feature set */
647 #define ATA_SF_EPC_SET_SOURCE	0x06	/* Set EPC Power Source */
648 
649 /*
650  * SET FEATURES command
651  * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
652  * Power Condition ID field
653  * These values go in the count register.
654  */
655 #define ATA_EPC_STANDBY_Z	0x00	/* Substate of PM2:Standby */
656 #define ATA_EPC_STANDBY_Y	0x01	/* Substate of PM2:Standby */
657 #define ATA_EPC_IDLE_A		0x81	/* Substate of PM1:Idle */
658 #define ATA_EPC_IDLE_B		0x82	/* Substate of PM1:Idle */
659 #define ATA_EPC_IDLE_C		0x83	/* Substate of PM1:Idle */
660 #define ATA_EPC_ALL		0xff	/* All supported power conditions */
661 
662 /*
663  * SET FEATURES command
664  * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
665  * Restore Power Conditions Settings subcommand
666  * These values go in the LBA register.
667  */
668 #define ATA_SF_EPC_RST_DFLT	0x40	/* 1=Rst from Default, 0= from Saved */
669 #define ATA_SF_EPC_RST_SAVE	0x10	/* 1=Save on completion */
670 
671 /*
672  * SET FEATURES command
673  * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
674  * Got To Power Condition subcommand
675  * These values go in the LBA register.
676  */
677 #define ATA_SF_EPC_GOTO_DELAY	0x02000000	/* Delayed entry bit */
678 #define ATA_SF_EPC_GOTO_HOLD	0x01000000	/* Hold Power Cond bit */
679 
680 /*
681  * SET FEATURES command
682  * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
683  * Set Power Condition Timer subcommand
684  * These values go in the LBA register.
685  */
686 #define ATA_SF_EPC_TIMER_MASK	0x00ffff00	/* Timer field */
687 #define ATA_SF_EPC_TIMER_SHIFT	8
688 #define ATA_SF_EPC_TIMER_SEC	0x00000080	/* Timer units, 1=sec, 0=.1s */
689 #define ATA_SF_EPC_TIMER_EN	0x00000020	/* Enable/disable cond. */
690 #define ATA_SF_EPC_TIMER_SAVE	0x00000010	/* Save settings on comp.  */
691 
692 /*
693  * SET FEATURES command
694  * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
695  * Set Power Condition State subcommand
696  * These values go in the LBA register.
697  */
698 #define ATA_SF_EPC_SETCON_EN	0x00000020	/* Enable power cond. */
699 #define ATA_SF_EPC_SETCON_SAVE	0x00000010	/* Save settings on comp */
700 
701 /*
702  * SET FEATURES command
703  * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
704  * Set EPC Power Source subcommand
705  * These values go in the count register.
706  */
707 #define ATA_SF_EPC_SRC_UNKNOWN	0x0000	/* Unknown source */
708 #define ATA_SF_EPC_SRC_BAT	0x0001	/* battery source */
709 #define ATA_SF_EPC_SRC_NOT_BAT	0x0002	/* not battery source */
710 
711 #define	ATA_LOG_DIRECTORY	0x00	/* Directory of all logs */
712 #define	ATA_POWER_COND_LOG	0x08	/* Power Conditions Log */
713 #define	ATA_PCL_IDLE		0x00	/* Idle Power Conditions Page */
714 #define	ATA_PCL_STANDBY		0x01	/* Standby Power Conditions Page */
715 #define	ATA_IDENTIFY_DATA_LOG	0x30	/* Identify Device Data Log */
716 #define	ATA_IDL_PAGE_LIST	0x00	/* List of supported pages */
717 #define	ATA_IDL_IDENTIFY_DATA	0x01	/* Copy of Identify Device data */
718 #define	ATA_IDL_CAPACITY	0x02	/* Capacity */
719 #define	ATA_IDL_SUP_CAP		0x03	/* Supported Capabilities */
720 #define	ATA_IDL_CUR_SETTINGS	0x04	/* Current Settings */
721 #define	ATA_IDL_ATA_STRINGS	0x05	/* ATA Strings */
722 #define	ATA_IDL_SECURITY	0x06	/* Security */
723 #define	ATA_IDL_PARALLEL_ATA	0x07	/* Parallel ATA */
724 #define	ATA_IDL_SERIAL_ATA	0x08	/* Serial ATA */
725 #define	ATA_IDL_ZDI		0x09	/* Zoned Device Information */
726 
727 struct ata_gp_log_dir {
728 	uint8_t header[2];
729 #define	ATA_GP_LOG_DIR_VERSION		0x0001
730 	uint8_t num_pages[255*2];	/* Number of log pages at address */
731 };
732 
733 /*
734  * ATA Power Conditions log descriptor
735  */
736 struct ata_power_cond_log_desc {
737 	uint8_t reserved1;
738 	uint8_t flags;
739 #define ATA_PCL_COND_SUPPORTED		0x80
740 #define ATA_PCL_COND_SAVEABLE		0x40
741 #define ATA_PCL_COND_CHANGEABLE		0x20
742 #define ATA_PCL_DEFAULT_TIMER_EN	0x10
743 #define ATA_PCL_SAVED_TIMER_EN		0x08
744 #define ATA_PCL_CURRENT_TIMER_EN	0x04
745 #define ATA_PCL_HOLD_PC_NOT_SUP		0x02
746 	uint8_t reserved2[2];
747 	uint8_t default_timer[4];
748 	uint8_t saved_timer[4];
749 	uint8_t current_timer[4];
750 	uint8_t nom_time_to_active[4];
751 	uint8_t min_timer[4];
752 	uint8_t max_timer[4];
753 	uint8_t num_transitions_to_pc[4];
754 	uint8_t hours_in_pc[4];
755 	uint8_t reserved3[28];
756 };
757 
758 /*
759  * ATA Power Conditions Log (0x08), Idle power conditions page (0x00)
760  */
761 struct ata_power_cond_log_idle {
762 	struct ata_power_cond_log_desc idle_a_desc;
763 	struct ata_power_cond_log_desc idle_b_desc;
764 	struct ata_power_cond_log_desc idle_c_desc;
765 	uint8_t reserved[320];
766 };
767 
768 /*
769  * ATA Power Conditions Log (0x08), Standby power conditions page (0x01)
770  */
771 struct ata_power_cond_log_standby {
772 	uint8_t reserved[384];
773 	struct ata_power_cond_log_desc standby_y_desc;
774 	struct ata_power_cond_log_desc standby_z_desc;
775 };
776 
777 /*
778  * ATA IDENTIFY DEVICE data log (0x30) page 0x00
779  * List of Supported IDENTIFY DEVICE data pages.
780  */
781 struct ata_identify_log_pages {
782 	uint8_t header[8];
783 #define	ATA_IDLOG_REVISION	0x0000000000000001
784 	uint8_t entry_count;
785 	uint8_t entries[503];
786 };
787 
788 /*
789  * ATA IDENTIFY DEVICE data log (0x30)
790  * Capacity (Page 0x02).
791  */
792 struct ata_identify_log_capacity {
793 	uint8_t header[8];
794 #define	ATA_CAP_HEADER_VALID	0x8000000000000000
795 #define	ATA_CAP_PAGE_NUM_MASK	0x0000000000ff0000
796 #define	ATA_CAP_PAGE_NUM_SHIFT	16
797 #define ATA_CAP_REV_MASK	0x00000000000000ff
798 	uint8_t capacity[8];
799 #define	ATA_CAP_CAPACITY_VALID	0x8000000000000000
800 #define	ATA_CAP_ACCESSIBLE_CAP	0x0000ffffffffffff
801 	uint8_t phys_logical_sect_size[8];
802 #define	ATA_CAP_PL_VALID	0x8000000000000000
803 #define	ATA_CAP_LTOP_REL_SUP	0x4000000000000000
804 #define	ATA_CAP_LOG_SECT_SUP	0x2000000000000000
805 #define	ATA_CAP_ALIGN_ERR_MASK	0x0000000000300000
806 #define	ATA_CAP_LTOP_MASK	0x00000000000f0000
807 #define	ATA_CAP_LOG_SECT_OFF	0x000000000000ffff
808 	uint8_t logical_sect_size[8];
809 #define	ATA_CAP_LOG_SECT_VALID	0x8000000000000000
810 #define	ATA_CAP_LOG_SECT_SIZE	0x00000000ffffffff
811 	uint8_t nominal_buffer_size[8];
812 #define	ATA_CAP_NOM_BUF_VALID	0x8000000000000000
813 #define	ATA_CAP_NOM_BUF_SIZE	0x7fffffffffffffff
814 	uint8_t reserved[472];
815 };
816 
817 /*
818  * ATA IDENTIFY DEVICE data log (0x30)
819  * Supported Capabilities (Page 0x03).
820  */
821 
822 struct ata_identify_log_sup_cap {
823 	uint8_t header[8];
824 #define	ATA_SUP_CAP_HEADER_VALID	0x8000000000000000
825 #define	ATA_SUP_CAP_PAGE_NUM_MASK	0x0000000000ff0000
826 #define	ATA_SUP_CAP_PAGE_NUM_SHIFT	16
827 #define ATA_SUP_CAP_REV_MASK		0x00000000000000ff
828 	uint8_t sup_cap[8];
829 #define	ATA_SUP_CAP_VALID		0x8000000000000000
830 #define	ATA_SC_SET_SECT_CONFIG_SUP	0x0002000000000000 /* Set Sect Conf*/
831 #define	ATA_SC_ZERO_EXT_SUP		0x0001000000000000 /* Zero EXT */
832 #define	ATA_SC_SUCC_NCQ_SENSE_SUP	0x0000800000000000 /* Succ. NCQ Sns */
833 #define	ATA_SC_DLC_SUP			0x0000400000000000 /* DLC */
834 #define	ATA_SC_RQSN_DEV_FAULT_SUP	0x0000200000000000 /* Req Sns Dev Flt*/
835 #define	ATA_SC_DSN_SUP			0x0000100000000000 /* DSN */
836 #define	ATA_SC_LP_STANDBY_SUP		0x0000080000000000 /* LP Standby */
837 #define	ATA_SC_SET_EPC_PS_SUP		0x0000040000000000 /* Set EPC PS */
838 #define	ATA_SC_AMAX_ADDR_SUP		0x0000020000000000 /* AMAX Addr */
839 #define	ATA_SC_DRAT_SUP			0x0000008000000000 /* DRAT */
840 #define	ATA_SC_LPS_MISALGN_SUP		0x0000004000000000 /* LPS Misalign */
841 #define	ATA_SC_RB_DMA_SUP		0x0000001000000000 /* Read Buf DMA */
842 #define	ATA_SC_WB_DMA_SUP		0x0000000800000000 /* Write Buf DMA */
843 #define	ATA_SC_DNLD_MC_DMA_SUP		0x0000000200000000 /* DL MCode DMA */
844 #define	ATA_SC_28BIT_SUP		0x0000000100000000 /* 28-bit */
845 #define	ATA_SC_RZAT_SUP			0x0000000080000000 /* RZAT */
846 #define	ATA_SC_NOP_SUP			0x0000000020000000 /* NOP */
847 #define	ATA_SC_READ_BUFFER_SUP		0x0000000010000000 /* Read Buffer */
848 #define	ATA_SC_WRITE_BUFFER_SUP		0x0000000008000000 /* Write Buffer */
849 #define	ATA_SC_READ_LOOK_AHEAD_SUP	0x0000000002000000 /* Read Look-Ahead*/
850 #define	ATA_SC_VOLATILE_WC_SUP		0x0000000001000000 /* Volatile WC */
851 #define	ATA_SC_SMART_SUP		0x0000000000800000 /* SMART */
852 #define	ATA_SC_FLUSH_CACHE_EXT_SUP	0x0000000000400000 /* Flush Cache Ext */
853 #define	ATA_SC_48BIT_SUP		0x0000000000100000 /* 48-Bit */
854 #define	ATA_SC_SPINUP_SUP		0x0000000000040000 /* Spin-Up */
855 #define	ATA_SC_PUIS_SUP			0x0000000000020000 /* PUIS */
856 #define	ATA_SC_APM_SUP			0x0000000000010000 /* APM */
857 #define	ATA_SC_DL_MICROCODE_SUP		0x0000000000004000 /* DL Microcode */
858 #define	ATA_SC_UNLOAD_SUP		0x0000000000002000 /* Unload */
859 #define	ATA_SC_WRITE_FUA_EXT_SUP	0x0000000000001000 /* Write FUA EXT */
860 #define	ATA_SC_GPL_SUP			0x0000000000000800 /* GPL */
861 #define	ATA_SC_STREAMING_SUP		0x0000000000000400 /* Streaming */
862 #define	ATA_SC_SMART_SELFTEST_SUP	0x0000000000000100 /* SMART self-test */
863 #define	ATA_SC_SMART_ERR_LOG_SUP	0x0000000000000080 /* SMART Err Log */
864 #define	ATA_SC_EPC_SUP			0x0000000000000040 /* EPC */
865 #define	ATA_SC_SENSE_SUP		0x0000000000000020 /* Sense data */
866 #define	ATA_SC_FREEFALL_SUP		0x0000000000000010 /* Free-Fall */
867 #define	ATA_SC_DM_MODE3_SUP		0x0000000000000008 /* DM Mode 3 */
868 #define	ATA_SC_GPL_DMA_SUP		0x0000000000000004 /* GPL DMA */
869 #define ATA_SC_WRITE_UNCOR_SUP		0x0000000000000002 /* Write uncorr.  */
870 #define ATA_SC_WRV_SUP			0x0000000000000001 /* WRV */
871 	uint8_t download_code_cap[8];
872 #define ATA_DL_CODE_VALID		0x8000000000000000
873 #define	ATA_DLC_DM_OFFSETS_DEFER_SUP	0x0000000400000000
874 #define	ATA_DLC_DM_IMMED_SUP		0x0000000200000000
875 #define	ATA_DLC_DM_OFF_IMMED_SUP	0x0000000100000000
876 #define	ATA_DLC_DM_MAX_XFER_SIZE_MASK	0x00000000ffff0000
877 #define	ATA_DLC_DM_MAX_XFER_SIZE_SHIFT	16
878 #define	ATA_DLC_DM_MIN_XFER_SIZE_MASK	0x000000000000ffff
879 	uint8_t nom_media_rotation_rate[8];
880 #define	ATA_NOM_MEDIA_ROTATION_VALID	0x8000000000000000
881 #define	ATA_ROTATION_MASK		0x000000000000ffff
882 	uint8_t form_factor[8];
883 #define	ATA_FORM_FACTOR_VALID		0x8000000000000000
884 #define	ATA_FF_MASK			0x000000000000000f
885 #define	ATA_FF_NOT_REPORTED		0x0000000000000000 /* Not reported */
886 #define	ATA_FF_525_IN			0x0000000000000001 /* 5.25 inch */
887 #define	ATA_FF_35_IN			0x0000000000000002 /* 3.5 inch */
888 #define	ATA_FF_25_IN			0x0000000000000003 /* 2.5 inch */
889 #define	ATA_FF_18_IN			0x0000000000000004 /* 1.8 inch */
890 #define	ATA_FF_LT_18_IN			0x0000000000000005 /* < 1.8 inch */
891 #define	ATA_FF_MSATA			0x0000000000000006 /* mSATA */
892 #define	ATA_FF_M2			0x0000000000000007 /* M.2 */
893 #define	ATA_FF_MICROSSD			0x0000000000000008 /* MicroSSD */
894 #define	ATA_FF_CFAST			0x0000000000000009 /* CFast */
895 	uint8_t wrv_sec_cnt_mode3[8];
896 #define ATA_WRV_MODE3_VALID		0x8000000000000000
897 #define ATA_WRV_MODE3_COUNT		0x00000000ffffffff
898 	uint8_t wrv_sec_cnt_mode2[8];
899 #define	ATA_WRV_MODE2_VALID		0x8000000000000000
900 #define ATA_WRV_MODE2_COUNT		0x00000000ffffffff
901 	uint8_t wwn[16];
902 	/* XXX KDM need to figure out how to handle 128-bit fields */
903 	uint8_t dsm[8];
904 #define	ATA_DSM_VALID			0x8000000000000000
905 #define	ATA_LB_MARKUP_SUP		0x000000000000ff00
906 #define	ATA_TRIM_SUP			0x0000000000000001
907 	uint8_t util_per_unit_time[16];
908 	/* XXX KDM need to figure out how to handle 128-bit fields */
909 	uint8_t util_usage_rate_sup[8];
910 #define	ATA_UTIL_USAGE_RATE_VALID	0x8000000000000000
911 #define	ATA_SETTING_RATE_SUP		0x0000000000800000
912 #define	ATA_SINCE_POWERON_SUP		0x0000000000000100
913 #define	ATA_POH_RATE_SUP		0x0000000000000010
914 #define	ATA_DATE_TIME_RATE_SUP		0x0000000000000001
915 	uint8_t zoned_cap[8];
916 #define	ATA_ZONED_VALID			0x8000000000000000
917 #define	ATA_ZONED_MASK			0x0000000000000003
918 	uint8_t sup_zac_cap[8];
919 #define	ATA_SUP_ZAC_CAP_VALID		0x8000000000000000
920 #define	ATA_ND_RWP_SUP			0x0000000000000010 /* Reset Write Ptr*/
921 #define	ATA_ND_FINISH_ZONE_SUP		0x0000000000000008 /* Finish Zone */
922 #define	ATA_ND_CLOSE_ZONE_SUP		0x0000000000000004 /* Close Zone */
923 #define	ATA_ND_OPEN_ZONE_SUP		0x0000000000000002 /* Open Zone */
924 #define	ATA_REPORT_ZONES_SUP		0x0000000000000001 /* Report Zones */
925 	uint8_t reserved[392];
926 };
927 
928 /*
929  * ATA Identify Device Data Log Zoned Device Information Page (0x09).
930  * Current as of ZAC r04a, August 25, 2015.
931  */
932 struct ata_zoned_info_log {
933 	uint8_t header[8];
934 #define	ATA_ZDI_HEADER_VALID	0x8000000000000000
935 #define	ATA_ZDI_PAGE_NUM_MASK	0x0000000000ff0000
936 #define	ATA_ZDI_PAGE_NUM_SHIFT	16
937 #define ATA_ZDI_REV_MASK	0x00000000000000ff
938 	uint8_t zoned_cap[8];
939 #define	ATA_ZDI_CAP_VALID	0x8000000000000000
940 #define	ATA_ZDI_CAP_URSWRZ	0x0000000000000001
941 	uint8_t zoned_settings[8];
942 #define	ATA_ZDI_SETTINGS_VALID	0x8000000000000000
943 	uint8_t optimal_seq_zones[8];
944 #define	ATA_ZDI_OPT_SEQ_VALID	0x8000000000000000
945 #define	ATA_ZDI_OPT_SEQ_MASK	0x00000000ffffffff
946 	uint8_t optimal_nonseq_zones[8];
947 #define	ATA_ZDI_OPT_NS_VALID	0x8000000000000000
948 #define	ATA_ZDI_OPT_NS_MASK	0x00000000ffffffff
949 	uint8_t max_seq_req_zones[8];
950 #define	ATA_ZDI_MAX_SEQ_VALID	0x8000000000000000
951 #define	ATA_ZDI_MAX_SEQ_MASK	0x00000000ffffffff
952 	uint8_t version_info[8];
953 #define	ATA_ZDI_VER_VALID	0x8000000000000000
954 #define	ATA_ZDI_VER_ZAC_SUP	0x0100000000000000
955 #define	ATA_ZDI_VER_ZAC_MASK	0x00000000000000ff
956 	uint8_t reserved[456];
957 };
958 
959 struct ata_ioc_request {
960     union {
961 	struct {
962 	    u_int8_t            command;
963 	    u_int8_t            feature;
964 	    u_int64_t           lba;
965 	    u_int16_t           count;
966 	} ata;
967 	struct {
968 	    char                ccb[16];
969 	    struct atapi_sense	sense;
970 	} atapi;
971     } u;
972     caddr_t             data;
973     int                 count;
974     int                 flags;
975 #define ATA_CMD_CONTROL                 0x01
976 #define ATA_CMD_READ                    0x02
977 #define ATA_CMD_WRITE                   0x04
978 #define ATA_CMD_ATAPI                   0x08
979 
980     int                 timeout;
981     int                 error;
982 };
983 
984 struct ata_security_password {
985 	u_int16_t		ctrl;
986 #define ATA_SECURITY_PASSWORD_USER	0x0000
987 #define ATA_SECURITY_PASSWORD_MASTER	0x0001
988 #define ATA_SECURITY_ERASE_NORMAL	0x0000
989 #define ATA_SECURITY_ERASE_ENHANCED	0x0002
990 #define ATA_SECURITY_LEVEL_HIGH		0x0000
991 #define ATA_SECURITY_LEVEL_MAXIMUM	0x0100
992 
993 	u_int8_t		password[32];
994 	u_int16_t		revision;
995 	u_int16_t		reserved[238];
996 };
997 
998 /* pr device ATA ioctl calls */
999 #define IOCATAREQUEST           _IOWR('a', 100, struct ata_ioc_request)
1000 #define IOCATAGPARM             _IOR('a', 101, struct ata_params)
1001 #define IOCATAGMODE             _IOR('a', 102, int)
1002 #define IOCATASMODE             _IOW('a', 103, int)
1003 
1004 #define IOCATAGSPINDOWN		_IOR('a', 104, int)
1005 #define IOCATASSPINDOWN		_IOW('a', 105, int)
1006 
1007 struct ata_ioc_raid_config {
1008 	    int                 lun;
1009 	    int                 type;
1010 #define AR_JBOD                         0x0001
1011 #define AR_SPAN                         0x0002
1012 #define AR_RAID0                        0x0004
1013 #define AR_RAID1                        0x0008
1014 #define AR_RAID01                       0x0010
1015 #define AR_RAID3                        0x0020
1016 #define AR_RAID4                        0x0040
1017 #define AR_RAID5                        0x0080
1018 
1019 	    int                 interleave;
1020 	    int                 status;
1021 #define AR_READY                        1
1022 #define AR_DEGRADED                     2
1023 #define AR_REBUILDING                   4
1024 
1025 	    int                 progress;
1026 	    int                 total_disks;
1027 	    int                 disks[16];
1028 };
1029 
1030 struct ata_ioc_raid_status {
1031 	    int                 lun;
1032 	    int                 type;
1033 	    int                 interleave;
1034 	    int                 status;
1035 	    int                 progress;
1036 	    int                 total_disks;
1037 	    struct {
1038 		    int		state;
1039 #define AR_DISK_ONLINE			0x01
1040 #define AR_DISK_PRESENT			0x02
1041 #define AR_DISK_SPARE			0x04
1042 		    int		lun;
1043 	    } disks[16];
1044 };
1045 
1046 /* ATA RAID ioctl calls */
1047 #define IOCATARAIDCREATE        _IOWR('a', 200, struct ata_ioc_raid_config)
1048 #define IOCATARAIDDELETE        _IOW('a', 201, int)
1049 #define IOCATARAIDSTATUS        _IOWR('a', 202, struct ata_ioc_raid_status)
1050 #define IOCATARAIDADDSPARE      _IOW('a', 203, struct ata_ioc_raid_config)
1051 #define IOCATARAIDREBUILD       _IOW('a', 204, int)
1052 
1053 #endif /* _SYS_ATA_H_ */
1054