Searched defs:read (Results 26 - 50 of 57) sorted by relevance

123

/illumos-gate/usr/src/uts/common/io/bnxe/577xx/drivers/common/lm/fw/
H A Dinit_defs.h36 OP_RD = 0x1, /* read a single register */
126 struct op_read read; member in union:init_op
/illumos-gate/usr/src/uts/common/io/ib/adapters/tavor/
H A Dtavor_ioctl.c49 * The ioctl declarations (for firmware flash burning, register read/write
236 * that the same dev_t that called init is the one calling read now.
1377 /* Determine base address for requested register read */
1553 * be operating in normal mode (capable of read/write, etc.).
1695 * was read from the same address.
1788 * 2) read the status at the base addr of the sector
1883 * 2) read the status at the base addr of the sector
2265 uint32_t read; local
2270 * Perform flash read operation:
2271 * 1) Place addr to read fro
[all...]
/illumos-gate/usr/src/lib/libldap5/sources/ldap/ber/
H A Dio.c69 # define read( s, b, l ) tcpread( s, 0, (unsigned char *)b, l, NULL ) macro
77 # define read( s, b, l ) recv( s, b, l, 0 ) macro
120 * buffered read from "sb".
121 * returns value of first character read on success and -1 on error.
165 rc = read( sb->sb_sd, sb->sb_ber.ber_buf,
621 * read the tag and the length and as much of the rest as we can
626 * First, we read the tag.
635 * Next, read the length. The first byte contains the length
662 * Finally, malloc a buffer for the contents and read it in.
983 * saving a call to calloc later when we read dat
[all...]
/illumos-gate/usr/src/boot/lib/libstand/
H A Dcd9660.c128 size_t read; local
145 ISO_DEFAULT_BLOCK_SIZE, susp_buffer, &read);
148 if (error != 0 || read != ISO_DEFAULT_BLOCK_SIZE)
289 size_t read, dsize, off; local
303 ISO_DEFAULT_BLOCK_SIZE, buf, &read);
306 if (read != ISO_DEFAULT_BLOCK_SIZE) {
339 buf, &read);
342 if (read != ISO_DEFAULT_BLOCK_SIZE) {
420 ISO_DEFAULT_BLOCK_SIZE, buf, &read);
423 if (read !
465 size_t read; local
[all...]
/illumos-gate/usr/src/lib/libshell/common/include/
H A Dedit.h189 # define read(fd,buff,n) syscall(3,fd,buff,n) macro
191 # define read(fd,buff,n) rEAd(fd,buff,n) macro
/illumos-gate/usr/src/lib/libnisdb/
H A Dldap_parse.h506 * read base/scope/filter triple used to read data from LDAP;
507 * LDAP_SCOPE_UNKNOWN indicates that 'read' is unused
520 * The "group.org_dir.x.y.z." NIS+ table should be read from and
525 * { read
542 __nis_search_triple_t read; member in struct:__anon3652
/illumos-gate/usr/src/uts/common/fs/ufs/
H A Dlufs_log.c173 int read = pb->b_flags & B_READ; local
206 if (read) {
505 * in other words, the read buffer pool is a linked list
615 * o read past eol
616 * o read past the tail
617 * o read data that may be being written.
671 * don't read past the tail or the end-of-log
871 * return current lof for next read
1108 caddr_t va, /* address of buffer to read into */
1115 caddr_t rva; /* address to read int
[all...]
/illumos-gate/usr/src/uts/common/sys/1394/
H A Dh1394.h137 int (*read)(void *hal_private, cmd1394_cmd_t *req, member in struct:h1394_evts_s
190 /* Result field returned by read/write/lock requests */
/illumos-gate/usr/src/uts/common/io/ib/adapters/hermon/
H A Dhermon_ioctl.c52 * The ioctl declarations (for firmware flash burning, register read/write
249 * that the same dev_t that called init is the one calling read now.
1451 * be operating in normal mode (capable of read/write, etc.).
1772 * To support this ioctl option, we can read in the
2522 /* temporarily set the cmdset in order to do the initial read */
2663 uint32_t read; local
2666 read = ddi_get32(hermon_get_cmdhdl(state), (uint32_t *)(void *)
2670 * Perform flash read operation:
2671 * 1) Place addr to read from on the HERMON_HW_FLASH_CFG_ADDR
2678 read
[all...]
/illumos-gate/usr/src/uts/common/io/e1000api/
H A De1000_82575.c384 nvm->ops.read = e1000_read_nvm_eerd;
386 nvm->ops.read = e1000_read_nvm_spi;
479 /* read mac address */
591 * @offset: register offset to be read
592 * @data: pointer to the read data
671 /* some i354 devices need an extra read for phy id */
728 DEBUGOUT2("Vendor ID 0x%08X read at address %u\n",
1127 * to read the config done bit, so an error is *ONLY* logged and returns
1436 * on the last TLP read/write transaction when MAC is reset.
1464 * When auto config read doe
2791 __e1000_access_emi_reg(struct e1000_hw *hw, u16 address, u16 *data, bool read) argument
[all...]
H A De1000_phy.c39 u16 *data, bool read, bool page_set);
42 u16 *data, bool read);
162 * @data: data value read
278 * @offset: register offset to be read
279 * @data: pointer to the read data
282 * information read to data.
306 /* Poll the ready bit to see if the MDI read completed
372 /* Poll the ready bit to see if the MDI read completed
409 * @offset: register offset to be read
410 * @data: pointer to the read dat
3429 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data, bool read, bool page_set) argument
3782 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, u16 *data, bool read) argument
[all...]
H A De1000_vf.h88 } read; member in union:e1000_adv_rx_desc
125 } read; member in union:e1000_adv_tx_desc
230 s32 (*read)(struct e1000_hw *, u32 *, u16, u16); member in struct:e1000_mbx_operations
H A De1000_ich8lan.c196 * otherwise assume the read PHY ID is correct if it is valid.
360 * attempts to acknowledge any phy read requests.
414 * that the PHY is in a known good state before we read/write
662 /* Can't read flash registers if register set isn't mapped. */
706 nvm->ops.read = e1000_read_nvm_spt;
709 nvm->ops.read = e1000_read_nvm_ich8lan;
838 * @data: pointer to value to read/write from/to the EMI address
839 * @read: boolean flag to indicate read or write
844 u16 *data, bool read)
843 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address, u16 *data, bool read) argument
[all...]
H A De1000_82575.h97 #define E1000_CTRL_EXT_NSICR 0x00000001 /* Disable Intr Clear all on read */
198 } read; member in union:e1000_adv_rx_desc
287 } read; member in union:e1000_adv_tx_desc
/illumos-gate/usr/src/uts/common/pcmcia/sys/
H A Dcis.h220 #define BAD_CIS_ADDR 0x080000000 /* read past end of mapped CIS error */
258 cisdata_t *byte; /* read pointer for GET_BYTE macros */
260 } read; member in struct:cistpl_t
277 #define CISTPLF_FROM_AM 0x000000040 /* tuple read from AM space */
278 #define CISTPLF_FROM_CM 0x000000080 /* tuple read from CM space */
326 ((uintptr_t)(tp)->read.byte - \
328 *(tp)->read.byte++ : ((tp)->flags |= CISTPLF_MEM_ERR))
330 ((uintptr_t)(tp)->read.byte - \
335 (((uintptr_t)(tp)->read.byte - \
337 *(cisdata_t *)(tp)->read
[all...]
/illumos-gate/usr/src/tools/smatch/src/
H A Dcheck_kernel_printf.c1043 int read = format_decode(fmt, &spec); local
1046 fmt += read;
1068 check_cast_from_pointer(old_fmt, read, arg, vaidx);
1077 sm_error("format specifier '%.*s' invalid", read, old_fmt);
1081 sm_error("no floats in the kernel; invalid format specifier '%.*s'", read, old_fmt);
/illumos-gate/usr/src/lib/libshell/common/sh/
H A Dio.c463 * a buffer with room for a sentinal is allocated for a read stream.
464 * A discipline is inserted when read stream is a tty or a pipe
1709 * This is the read discipline that is applied to slow devices
1813 if(read(fd,"",0) < 0)
1968 write(ERRIO,"read from",9);
2109 * The stream can be read with the normal stream operations
2129 * read function for subfile discipline
2230 #undef read macro
2232 * shell version of read() for user added builtins
2240 return(read(f
[all...]
/illumos-gate/usr/src/lib/libc/port/threads/
H A Dscalls.c48 #pragma weak _read = read
511 read(int fd, void *buf, size_t size) function
/illumos-gate/usr/src/uts/common/io/qede/579xx/drivers/ecore/hsi_repository/
H A Decore_hsi_init_tool.h388 * init operation: read
411 struct init_read_op read /* read init operation */; member in union:init_op
425 INIT_OP_READ /* GRC read init command */,
/illumos-gate/usr/src/uts/common/io/qede/579xx/hsi/hw/
H A Dinit_tool_hsi.h306 * init operation: read
330 struct init_read_op read /* read init operation */; member in union:init_op
343 INIT_OP_READ /* GRC read init command */,
/illumos-gate/usr/src/uts/common/io/qede/579xx/drivers/ecore/
H A Decore_hsi_init_tool.h388 * init operation: read
411 struct init_read_op read /* read init operation */; member in union:init_op
425 INIT_OP_READ /* GRC read init command */,
/illumos-gate/usr/src/uts/common/fs/zfs/
H A Ddmu.c550 boolean_t read, void *tag, int *numbufsp, dmu_buf_t ***dbpp, uint32_t flags)
561 * Note: We directly notify the prefetch code of this read, so that
562 * we can tell it about the multi-block read. dbuf_read() only knows
600 if (read)
608 read && DNODE_IS_CACHEABLE(dn));
620 if (read) {
644 uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp)
653 err = dmu_buf_hold_array_by_dnode(dn, offset, length, read, tag,
663 uint64_t length, boolean_t read, void *tag, int *numbufsp,
672 err = dmu_buf_hold_array_by_dnode(dn, offset, length, read, ta
549 dmu_buf_hold_array_by_dnode(dnode_t *dn, uint64_t offset, uint64_t length, boolean_t read, void *tag, int *numbufsp, dmu_buf_t ***dbpp, uint32_t flags) argument
643 dmu_buf_hold_array(objset_t *os, uint64_t object, uint64_t offset, uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp) argument
662 dmu_buf_hold_array_by_bonus(dmu_buf_t *db_fake, uint64_t offset, uint64_t length, boolean_t read, void *tag, int *numbufsp, dmu_buf_t ***dbpp) argument
[all...]
/illumos-gate/usr/src/uts/common/io/bge/
H A Dbge_chip2.c171 * Config space read-modify-write routines
1230 * and then re-read the register to get the final value of the
1244 * value read after the 5us delay. This seems to be due to the
1249 * the data from the original read that showed START clear.
1436 * All OK; read the SEEPROM data register, then write back
1437 * the value read from the address register in order to
1538 * All OK; read the data from the Flash read register
1856 bge_nvmem_access_cmd(bge_t *bgep, boolean_t read) argument
1866 return (read
[all...]
/illumos-gate/usr/src/cmd/cmd-inet/usr.bin/pppdump/
H A Dzlib.c235 /* Sliding window. Input bytes are read into the second half of the window,
874 * and total number of bytes read.
1105 * At least one byte has been read, or avail_in == 0; reads are
2976 * i.e. no pending output (hence s->read equals s->write), and the state must
3095 Bytef *read; /* window read pointer */ member in struct:inflate_blocks_state
3117 #define WAVAIL (q<s->read?s->read-q-1:s->end-q)
3119 #define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}}
3208 13. The literal/length and distance code bit lengths are read a
[all...]
/illumos-gate/usr/src/uts/common/io/ppp/spppcomp/
H A Dzlib.c384 * Sliding window. Input bytes are read into the second half
1378 * and total number of bytes read. All deflate() input goes through
1716 * At least one byte has been read, or avail_in == 0; reads are
1813 "read too much");
3921 * i.e. no pending output (hence s->read equals s->write), and the state must
4190 Bytef *read; /* window read pointer */ member in struct:inflate_blocks_state
4213 #define WAVAIL (uInt)(q < s->read ? s->read-q-1 : s->end-q)
4215 #define WWRAP {if (q == s->end && s->read !
[all...]

Completed in 430 milliseconds

123