1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 /*LINTLIBRARY*/
27 
28 #include <stdlib.h>
29 #include <libintl.h>
30 #include <unistd.h>
31 #include <string.h>
32 #include <sys/utsname.h>
33 #include <papi_impl.h>
34 
35 #include "class.h"
36 
37 void
lpsched_printer_status_to_attributes(papi_attribute_t *** attrs,unsigned short status)38 lpsched_printer_status_to_attributes(papi_attribute_t ***attrs,
39 	unsigned short status)
40 {
41 	if (attrs == NULL)
42 		return;
43 
44 	if (!(status & (PS_DISABLED|PS_LATER))) {
45 		if (status & PS_FAULTED) {
46 			if (status & PS_BUSY)
47 				/* faulted printing */
48 				papiAttributeListAddInteger(attrs,
49 				    PAPI_ATTR_REPLACE,
50 				    "printer-state", 0x06);
51 			else
52 				/* faulted printer */
53 				papiAttributeListAddInteger(attrs,
54 				    PAPI_ATTR_REPLACE,
55 				    "printer-state", 0x07);
56 
57 			papiAttributeListAddString(attrs, PAPI_ATTR_REPLACE,
58 			    "printer-state-reasons", "none");
59 		} else if (status & PS_BUSY) {
60 			papiAttributeListAddInteger(attrs, PAPI_ATTR_REPLACE,
61 			    "printer-state", 0x04); /* processing */
62 			papiAttributeListAddString(attrs, PAPI_ATTR_REPLACE,
63 			    "printer-state-reasons", "moving-to-paused");
64 		} else if (status & PS_FORM_FAULT) {
65 			papiAttributeListAddInteger(attrs, PAPI_ATTR_REPLACE,
66 			    "printer-state", 0x05); /* stopped */
67 			papiAttributeListAddString(attrs, PAPI_ATTR_REPLACE,
68 			    "printer-state-reasons",
69 			    "interpreter-resource-unavailable");
70 		} else
71 			papiAttributeListAddInteger(attrs, PAPI_ATTR_REPLACE,
72 			    "printer-state", 0x03); /* idle */
73 	} else if (status & PS_DISABLED) {
74 		papiAttributeListAddInteger(attrs, PAPI_ATTR_REPLACE,
75 		    "printer-state", 0x05); /* stopped */
76 		papiAttributeListAddString(attrs, PAPI_ATTR_REPLACE,
77 		    "printer-state-reasons", "paused");
78 	} else if (status & PS_LATER) {
79 		papiAttributeListAddInteger(attrs, PAPI_ATTR_REPLACE,
80 		    "printer-state", 0x08); /* waiting for auto reply */
81 		papiAttributeListAddString(attrs, PAPI_ATTR_REPLACE,
82 		    "printer-state-reasons", "moving-to-paused");
83 	} else {
84 		papiAttributeListAddInteger(attrs, PAPI_ATTR_REPLACE,
85 		    "printer-state", 0x03); /* idle */
86 	}
87 
88 	papiAttributeListAddBoolean(attrs, PAPI_ATTR_REPLACE,
89 	    "printer-is-accepting-jobs",
90 	    ((status & PS_REJECTED) != PS_REJECTED));
91 	papiAttributeListAddBoolean(attrs, PAPI_ATTR_REPLACE,
92 	    "printer-is-processing-jobs",
93 	    ((status & PS_DISABLED) != PS_DISABLED));
94 }
95 
96 void
lpsched_printer_defaults(papi_attribute_t *** attributes)97 lpsched_printer_defaults(papi_attribute_t ***attributes)
98 {
99 	if (attributes == NULL)
100 		return;
101 
102 	papiAttributeListAddBoolean(attributes, PAPI_ATTR_REPLACE,
103 	    "multiple-document-jobs-supported", PAPI_TRUE);
104 	papiAttributeListAddString(attributes, PAPI_ATTR_REPLACE,
105 	    "multiple-document-handling-supported",
106 	    "seperate-documents-colated-copies");
107 	papiAttributeListAddString(attributes, PAPI_ATTR_REPLACE,
108 	    "pdl-override-supported", "not-attempted");
109 	papiAttributeListAddInteger(attributes, PAPI_ATTR_REPLACE,
110 	    "job-priority-supported", 40);
111 	papiAttributeListAddInteger(attributes, PAPI_ATTR_REPLACE,
112 	    "job-priority-default", 20);
113 	papiAttributeListAddRange(attributes, PAPI_ATTR_REPLACE,
114 	    "copies-supported", 1, 65535);
115 	papiAttributeListAddInteger(attributes, PAPI_ATTR_REPLACE,
116 	    "copies-default", 1);
117 	papiAttributeListAddBoolean(attributes, PAPI_ATTR_REPLACE,
118 	    "page-ranges-supported", PAPI_TRUE);
119 	papiAttributeListAddInteger(attributes, PAPI_ATTR_REPLACE,
120 	    "number-up-supported", 1);
121 	papiAttributeListAddInteger(attributes, PAPI_ATTR_REPLACE,
122 	    "number-up-default", 1);
123 	papiAttributeListAddString(attributes, PAPI_ATTR_REPLACE,
124 	    "job-hold-until-supported", "no-hold");
125 	papiAttributeListAddString(attributes, PAPI_ATTR_APPEND,
126 	    "job-hold-until-supported", "indefinite");
127 	papiAttributeListAddString(attributes, PAPI_ATTR_REPLACE,
128 	    "job-hold-until-default", "no-hold");
129 	papiAttributeListAddString(attributes, PAPI_ATTR_REPLACE,
130 	    "document-format-default", "application/octet-stream");
131 
132 }
133 
134 papi_status_t
lpsched_printer_configuration_to_attributes(service_t * svc,printer_t * p,char * dest)135 lpsched_printer_configuration_to_attributes(service_t *svc, printer_t *p,
136 	char *dest)
137 {
138 	PRINTER *tmp;
139 	char buf[BUFSIZ+1];
140 	struct utsname sysname;
141 	char **allowed = NULL, **denied = NULL;
142 	char **f_allowed = NULL, **f_denied = NULL;
143 
144 	if ((svc == NULL) || (p == NULL) || (dest == NULL))
145 		return (PAPI_BAD_ARGUMENT);
146 
147 	/* get the configuration DB data */
148 	if ((tmp = getprinter(dest)) == NULL) {
149 		detailed_error(svc,
150 		    gettext("unable to read configuration data"));
151 		return (PAPI_DEVICE_ERROR);
152 	}
153 
154 	/* name */
155 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
156 	"printer-name", tmp->name);
157 	if (tmp->name != NULL) {
158 		char uri[BUFSIZ];
159 
160 		snprintf(uri, sizeof (uri), "lpsched://localhost/printers/%s",
161 		    tmp->name);
162 		papiAttributeListAddString(&p->attributes, PAPI_ATTR_REPLACE,
163 		    "printer-uri-supported", uri);
164 	}
165 
166 	/* banner */
167 	if ((tmp->banner & BAN_OPTIONAL) == BAN_OPTIONAL)
168 		papiAttributeListAddString(&p->attributes, PAPI_ATTR_APPEND,
169 		    "job-sheets-supported", "optional");
170 	else if (tmp->banner & BAN_NEVER)
171 		papiAttributeListAddString(&p->attributes, PAPI_ATTR_APPEND,
172 		    "job-sheets-supported", "none");
173 	else if (tmp->banner & BAN_ALWAYS)
174 		papiAttributeListAddString(&p->attributes, PAPI_ATTR_APPEND,
175 		    "job-sheets-supported", "standard");
176 
177 	/* input_types */
178 	if (tmp->input_types != NULL) {
179 		int i;
180 
181 		for (i = 0; tmp->input_types[i] != NULL; i++)
182 			papiAttributeListAddLPString(&p->attributes,
183 			    PAPI_ATTR_APPEND, "document-format-supported",
184 			    lp_type_to_mime_type(tmp->input_types[i]));
185 	}
186 
187 	/* description */
188 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
189 	    "printer-info", tmp->description);
190 
191 	/* add lpsched specific attributes */
192 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
193 	    "device-uri", tmp->device);
194 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
195 	    "lpsched-dial-info", tmp->dial_info);
196 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
197 	    "lpsched-fault-recovery", tmp->fault_rec);
198 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
199 	    "lpsched-interface-script", tmp->interface);
200 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
201 	    "lpsched-data-rate", tmp->speed);
202 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
203 	    "lpsched-stty", tmp->stty);
204 	papiAttributeListAddBoolean(&p->attributes, PAPI_ATTR_REPLACE,
205 	    "lpsched-login-term", tmp->login);
206 	papiAttributeListAddBoolean(&p->attributes, PAPI_ATTR_REPLACE,
207 	    "lpsched-daisy", tmp->daisy);
208 	papiAttributeListAddLPStrings(&p->attributes, PAPI_ATTR_REPLACE,
209 	    "lpsched-charsets", tmp->char_sets);
210 #ifdef CAN_DO_MODULES
211 	papiAttributeListAddLPStrings(&p->attributes, PAPI_ATTR_REPLACE,
212 	    "lpsched-modules", tmp->modules);
213 #endif /* CAN_DO_MODULES */
214 	papiAttributeListAddLPStrings(&p->attributes, PAPI_ATTR_REPLACE,
215 	    "lpsched-options", tmp->options);
216 	papiAttributeListAddLPStrings(&p->attributes, PAPI_ATTR_REPLACE,
217 	    "lpsched-printer-type", tmp->printer_types);
218 	if (tmp->fault_alert.shcmd != NULL) {
219 		papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
220 		    "lpsched-fault-alert-command",
221 		    tmp->fault_alert.shcmd);
222 		papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
223 		    "lpsched-fault-alert-threshold",
224 		    tmp->fault_alert.Q);
225 		papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
226 		    "lpsched-fault-alert-interval",
227 		    tmp->fault_alert.W);
228 	}
229 	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
230 	    "lpsched-cpi-value", tmp->cpi.val);
231 	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
232 	    "lpsched-cpi-unit", tmp->cpi.sc);
233 	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
234 	    "lpsched-lpi-value", tmp->lpi.val);
235 	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
236 	    "lpsched-lpi-unit", tmp->lpi.sc);
237 	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
238 	    "lpsched-plen-value", tmp->plen.val);
239 	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
240 	    "lpsched-plen-unit", tmp->plen.sc);
241 	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
242 	    "lpsched-pwid-value", tmp->pwid.val);
243 	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
244 	    "lpsched-pwid-unit", tmp->pwid.sc);
245 
246 	/* allow/deny list */
247 	load_userprinter_access(dest, &allowed, &denied);
248 	papiAttributeListAddLPStrings(&p->attributes, PAPI_ATTR_REPLACE,
249 	    "requesting-user-name-allowed", allowed);
250 	papiAttributeListAddLPStrings(&p->attributes, PAPI_ATTR_REPLACE,
251 	    "requesting-user-name-denied", denied);
252 
253 	freelist(allowed);
254 	freelist(denied);
255 
256 	/* forms allow/deny list */
257 	load_formprinter_access(dest, &f_allowed, &f_denied);
258 	papiAttributeListAddLPStrings(&p->attributes, PAPI_ATTR_REPLACE,
259 	    "form-supported", f_allowed);
260 
261 	/*
262 	 * All forms allowed case
263 	 * When all forms are allowed forms.allow does not get created but
264 	 * forms.deny file gets created with no entries
265 	 */
266 	if ((f_allowed == NULL) && (f_denied != NULL) && (f_denied[0] == NULL))
267 		papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
268 		    "form-supported", "all");
269 
270 	freelist(f_allowed);
271 	freelist(f_denied);
272 
273 #ifdef LP_USE_PAPI_ATTR
274 	if (tmp->ppd != NULL) {
275 		int fd;
276 		struct stat sbuf;
277 
278 		/* construct the two URIs for the printer's PPD file */
279 		if (uname(&sysname) < 0) {
280 			/* failed to get systen name */
281 			sysname.nodename[0] = 0;
282 		}
283 		snprintf(buf, sizeof (buf), "file://%s%s/ppd/%s.ppd",
284 		    sysname.nodename, ETCDIR, tmp->name);
285 		papiAttributeListAddString(&p->attributes, PAPI_ATTR_REPLACE,
286 		    "ppd-file-uri", buf);
287 
288 		snprintf(buf, sizeof (buf), "file://%s%s",
289 		    sysname.nodename, tmp->ppd);
290 		papiAttributeListAddString(&p->attributes, PAPI_ATTR_REPLACE,
291 		    "lpsched-printer-configure-ppd-uri", buf);
292 		papiAttributeListAddString(&p->attributes, PAPI_ATTR_REPLACE,
293 		    "lpsched-ppd-source-path", tmp->ppd);
294 
295 		snprintf(buf, sizeof (buf), "%s/ppd/%s.ppd", ETCDIR, tmp->name);
296 
297 		/*
298 		 * We don't return error on any of the error conditions, we just
299 		 * silently return without adding the attribute.
300 		 */
301 		PPDFileToAttributesList(&p->attributes, buf);
302 	}
303 #endif
304 
305 	freeprinter(tmp);
306 
307 	return (PAPI_OK);
308 }
309 
310 papi_status_t
printer_status_to_attributes(printer_t * p,char * printer,char * form,char * character_set,char * disable_reason,char * reject_reason,short status,char * request_id,long disable_date,long reject_date)311 printer_status_to_attributes(printer_t *p, char *printer, char *form,
312 		char *character_set, char *disable_reason, char *reject_reason,
313 		short status, char *request_id,
314 		long disable_date, long reject_date)
315 {
316 	if (p == NULL)
317 		return (PAPI_BAD_ARGUMENT);
318 
319 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
320 	    "form-ready", form);
321 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
322 	    "lpsched-active-job", request_id);
323 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
324 	    "lpsched-mounted-char-set", character_set);
325 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
326 	    "lpsched-disable-reason", disable_reason);
327 	papiAttributeListAddDatetime(&p->attributes, PAPI_ATTR_REPLACE,
328 	    "lpsched-disable-date", disable_date);
329 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
330 	    "lpsched-reject-reason", reject_reason);
331 	papiAttributeListAddDatetime(&p->attributes, PAPI_ATTR_REPLACE,
332 	    "lpsched-reject-date", reject_date);
333 
334 	/* add the current system time */
335 	papiAttributeListAddDatetime(&p->attributes, PAPI_ATTR_REPLACE,
336 	    "printer-current-time", time(NULL));
337 
338 	/* add the time since last enabled */
339 	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
340 	    "printer-up-time", time(NULL));
341 
342 	/* add the status information */
343 	lpsched_printer_status_to_attributes(&p->attributes, status);
344 
345 	papiAttributeListAddString(&p->attributes, PAPI_ATTR_EXCL,
346 	    "printer-state-reasons", "none");
347 
348 	lpsched_printer_defaults(&p->attributes);
349 
350 	return (PAPI_OK);
351 }
352 
353 
354 /*
355  * This puts the class information in only.  It could create a hybrid
356  * printer object to return, but that is problematic at best.
357  */
358 papi_status_t
lpsched_class_configuration_to_attributes(service_t * svc,printer_t * p,char * dest)359 lpsched_class_configuration_to_attributes(service_t *svc, printer_t *p,
360 	char *dest)
361 {
362 	CLASS *tmp;
363 
364 	if ((svc == NULL) || (p == NULL))
365 		return (PAPI_BAD_ARGUMENT);
366 
367 	/* get the configuration DB data */
368 	if ((tmp = getclass(dest)) == NULL) {
369 		detailed_error(svc,
370 		    gettext("unable to read configuration data"));
371 		return (PAPI_DEVICE_ERROR);
372 	}
373 
374 	/* name */
375 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
376 	    "printer-name", tmp->name);
377 	if (tmp->name != NULL) {
378 		char uri[BUFSIZ];
379 
380 		snprintf(uri, sizeof (uri), "lpsched://localhost/printers/%s",
381 		    tmp->name);
382 		papiAttributeListAddString(&p->attributes, PAPI_ATTR_REPLACE,
383 		    "printer-uri-supported", uri);
384 	}
385 
386 	if (tmp->members != NULL) {
387 		char **members = tmp->members;
388 		int i;
389 
390 		for (i = 0; members[i] != NULL; i++)
391 			papiAttributeListAddString(&p->attributes,
392 			    PAPI_ATTR_APPEND,
393 			    "member-names", members[i]);
394 	}
395 
396 	freeclass(tmp);
397 
398 	return (PAPI_OK);
399 }
400 
401 papi_status_t
class_status_to_attributes(printer_t * p,char * printer,short status,char * reject_reason,long reject_date)402 class_status_to_attributes(printer_t *p, char *printer, short status,
403 		char *reject_reason, long reject_date)
404 {
405 	if (p == NULL)
406 		return (PAPI_BAD_ARGUMENT);
407 
408 	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
409 	    "lpsched-reject-reason", reject_reason);
410 	papiAttributeListAddDatetime(&p->attributes, PAPI_ATTR_REPLACE,
411 	    "lpsched-reject-date", reject_date);
412 
413 	/* add the current system time */
414 	papiAttributeListAddDatetime(&p->attributes, PAPI_ATTR_REPLACE,
415 	    "printer-current-time", time(NULL));
416 
417 	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
418 	    "printer-up-time", time(NULL));
419 
420 	/* add the status information */
421 	lpsched_printer_status_to_attributes(&p->attributes, status);
422 
423 	papiAttributeListAddString(&p->attributes, PAPI_ATTR_EXCL,
424 	    "printer-state-reasons", "none");
425 
426 	lpsched_printer_defaults(&p->attributes);
427 
428 	return (PAPI_OK);
429 }
430 
431 papi_status_t
attributes_to_printer(papi_attribute_t ** attributes,PRINTER * tmp)432 attributes_to_printer(papi_attribute_t **attributes, PRINTER *tmp)
433 {
434 	papi_status_t status;
435 	void *iter = NULL;
436 	char *string = NULL;
437 	int flags;
438 	char **list = NULL;
439 
440 	/* banner needs some conversion to the bitfield */
441 	iter = NULL, string = NULL; flags = 0;
442 	for (status = papiAttributeListGetString(attributes, &iter,
443 	    "job-sheets-supported", &string);
444 	    status == PAPI_OK;
445 	    status = papiAttributeListGetString(attributes, &iter,
446 	    NULL, &string))
447 		if (strcasecmp(string, "none") == 0)
448 			flags |= BAN_NEVER;
449 		else if (strcasecmp(string, "standard") == 0)
450 			flags |= BAN_ALWAYS;
451 	if (flags != 0)
452 		tmp->banner = flags;
453 
454 	/* input_types needs mime-type conversion */
455 	iter = NULL, string = NULL; list = NULL;
456 	for (status = papiAttributeListGetString(attributes, &iter,
457 	    "document-format-supported", &string);
458 	    status == PAPI_OK;
459 	    status = papiAttributeListGetString(attributes, &iter,
460 	    NULL, &string))
461 		addlist(&list, mime_type_to_lp_type(string));
462 	if (list != NULL) {
463 		if (tmp->input_types != NULL)
464 			freelist(tmp->input_types);
465 		tmp->input_types = list;
466 	}
467 
468 	papiAttributeListGetLPString(attributes,
469 	    "device-uri", &tmp->device);
470 	papiAttributeListGetLPString(attributes,
471 	    "printer-info", &tmp->description);
472 	papiAttributeListGetLPString(attributes,
473 	    "lpsched-dial-info", &tmp->dial_info);
474 	papiAttributeListGetLPString(attributes,
475 	    "lpsched-fault-recovery", &tmp->fault_rec);
476 	papiAttributeListGetLPString(attributes,
477 	    "lpsched-interface-script", &tmp->interface);
478 	papiAttributeListGetLPString(attributes,
479 	    "lpsched-data-rate", &tmp->speed);
480 	papiAttributeListGetLPString(attributes,
481 	    "lpsched-stty", &tmp->stty);
482 	papiAttributeListGetLPStrings(attributes,
483 	    "lpsched-charsets", &tmp->char_sets);
484 	papiAttributeListGetLPStrings(attributes,
485 	    "lpsched-printer-types", &tmp->printer_types);
486 	papiAttributeListGetLPStrings(attributes,
487 	    "lpsched-options", &tmp->options);
488 	papiAttributeListGetLPStrings(attributes,
489 	    "lpsched-modules", &tmp->modules);
490 #ifdef LP_USE_PAPI_ATTR
491 	papiAttributeListGetLPString(attributes,
492 	    "lpsched-printer-ppd-uri", &tmp->ppd);
493 #endif
494 
495 	return (PAPI_OK);
496 }
497