1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright (c) 2002, 2010, Oracle and/or its affiliates. All rights reserved.
24  */
25 
26 /*
27  * EHCI Host Controller Driver (EHCI)
28  *
29  * The EHCI driver is a software driver which interfaces to the Universal
30  * Serial Bus layer (USBA) and the Host Controller (HC). The interface to
31  * the Host Controller is defined by the EHCI Host Controller Interface.
32  *
33  * This module contains the main EHCI driver code which handles all USB
34  * transfers, bandwidth allocations and other general functionalities.
35  */
36 
37 #include <sys/usb/hcd/ehci/ehcid.h>
38 #include <sys/usb/hcd/ehci/ehci_intr.h>
39 #include <sys/usb/hcd/ehci/ehci_util.h>
40 #include <sys/usb/hcd/ehci/ehci_isoch.h>
41 
42 /* Adjustable variables for the size of the pools */
43 extern int ehci_qh_pool_size;
44 extern int ehci_qtd_pool_size;
45 
46 
47 /* Endpoint Descriptor (QH) related functions */
48 ehci_qh_t	*ehci_alloc_qh(
49 				ehci_state_t		*ehcip,
50 				usba_pipe_handle_data_t	*ph,
51 				uint_t			flag);
52 static void	ehci_unpack_endpoint(
53 				ehci_state_t		*ehcip,
54 				usba_pipe_handle_data_t	*ph,
55 				ehci_qh_t		*qh);
56 void		ehci_insert_qh(
57 				ehci_state_t		*ehcip,
58 				usba_pipe_handle_data_t	*ph);
59 static void	ehci_insert_async_qh(
60 				ehci_state_t		*ehcip,
61 				ehci_pipe_private_t	*pp);
62 static void	ehci_insert_intr_qh(
63 				ehci_state_t		*ehcip,
64 				ehci_pipe_private_t	*pp);
65 static void	ehci_modify_qh_status_bit(
66 				ehci_state_t		*ehcip,
67 				ehci_pipe_private_t	*pp,
68 				halt_bit_t		action);
69 static void	ehci_halt_hs_qh(
70 				ehci_state_t		*ehcip,
71 				ehci_pipe_private_t	*pp,
72 				ehci_qh_t		*qh);
73 static void	ehci_halt_fls_ctrl_and_bulk_qh(
74 				ehci_state_t		*ehcip,
75 				ehci_pipe_private_t	*pp,
76 				ehci_qh_t		*qh);
77 static void	ehci_clear_tt_buffer(
78 				ehci_state_t		*ehcip,
79 				usba_pipe_handle_data_t	*ph,
80 				ehci_qh_t		*qh);
81 static void	ehci_halt_fls_intr_qh(
82 				ehci_state_t		*ehcip,
83 				ehci_qh_t		*qh);
84 void		ehci_remove_qh(
85 				ehci_state_t		*ehcip,
86 				ehci_pipe_private_t	*pp,
87 				boolean_t		reclaim);
88 static void	ehci_remove_async_qh(
89 				ehci_state_t		*ehcip,
90 				ehci_pipe_private_t	*pp,
91 				boolean_t		reclaim);
92 static void	ehci_remove_intr_qh(
93 				ehci_state_t		*ehcip,
94 				ehci_pipe_private_t	*pp,
95 				boolean_t		reclaim);
96 static void	ehci_insert_qh_on_reclaim_list(
97 				ehci_state_t		*ehcip,
98 				ehci_pipe_private_t	*pp);
99 void		ehci_deallocate_qh(
100 				ehci_state_t		*ehcip,
101 				ehci_qh_t		*old_qh);
102 uint32_t	ehci_qh_cpu_to_iommu(
103 				ehci_state_t		*ehcip,
104 				ehci_qh_t		*addr);
105 ehci_qh_t	*ehci_qh_iommu_to_cpu(
106 				ehci_state_t		*ehcip,
107 				uintptr_t		addr);
108 
109 /* Transfer Descriptor (QTD) related functions */
110 static int	ehci_initialize_dummy(
111 				ehci_state_t		*ehcip,
112 				ehci_qh_t		*qh);
113 ehci_trans_wrapper_t *ehci_allocate_ctrl_resources(
114 				ehci_state_t		*ehcip,
115 				ehci_pipe_private_t	*pp,
116 				usb_ctrl_req_t		*ctrl_reqp,
117 				usb_flags_t		usb_flags);
118 void		ehci_insert_ctrl_req(
119 				ehci_state_t		*ehcip,
120 				usba_pipe_handle_data_t	*ph,
121 				usb_ctrl_req_t		*ctrl_reqp,
122 				ehci_trans_wrapper_t	*tw,
123 				usb_flags_t		usb_flags);
124 ehci_trans_wrapper_t *ehci_allocate_bulk_resources(
125 				ehci_state_t		*ehcip,
126 				ehci_pipe_private_t	*pp,
127 				usb_bulk_req_t		*bulk_reqp,
128 				usb_flags_t		usb_flags);
129 void		ehci_insert_bulk_req(
130 				ehci_state_t		*ehcip,
131 				usba_pipe_handle_data_t	*ph,
132 				usb_bulk_req_t		*bulk_reqp,
133 				ehci_trans_wrapper_t	*tw,
134 				usb_flags_t		flags);
135 int		ehci_start_periodic_pipe_polling(
136 				ehci_state_t		*ehcip,
137 				usba_pipe_handle_data_t	*ph,
138 				usb_opaque_t		periodic_in_reqp,
139 				usb_flags_t		flags);
140 static int	ehci_start_pipe_polling(
141 				ehci_state_t		*ehcip,
142 				usba_pipe_handle_data_t	*ph,
143 				usb_flags_t		flags);
144 static int	ehci_start_intr_polling(
145 				ehci_state_t		*ehcip,
146 				usba_pipe_handle_data_t	*ph,
147 				usb_flags_t		flags);
148 static void	ehci_set_periodic_pipe_polling(
149 				ehci_state_t		*ehcip,
150 				usba_pipe_handle_data_t	*ph);
151 ehci_trans_wrapper_t *ehci_allocate_intr_resources(
152 				ehci_state_t		*ehcip,
153 				usba_pipe_handle_data_t	*ph,
154 				usb_intr_req_t		*intr_reqp,
155 				usb_flags_t		usb_flags);
156 void		ehci_insert_intr_req(
157 				ehci_state_t		*ehcip,
158 				ehci_pipe_private_t	*pp,
159 				ehci_trans_wrapper_t	*tw,
160 				usb_flags_t		flags);
161 int		ehci_stop_periodic_pipe_polling(
162 				ehci_state_t		*ehcip,
163 				usba_pipe_handle_data_t	*ph,
164 				usb_flags_t		flags);
165 int		ehci_insert_qtd(
166 				ehci_state_t		*ehcip,
167 				uint32_t		qtd_ctrl,
168 				size_t			qtd_dma_offs,
169 				size_t			qtd_length,
170 				uint32_t		qtd_ctrl_phase,
171 				ehci_pipe_private_t	*pp,
172 				ehci_trans_wrapper_t	*tw);
173 static ehci_qtd_t *ehci_allocate_qtd_from_pool(
174 				ehci_state_t		*ehcip);
175 static void	ehci_fill_in_qtd(
176 				ehci_state_t		*ehcip,
177 				ehci_qtd_t		*qtd,
178 				uint32_t		qtd_ctrl,
179 				size_t			qtd_dma_offs,
180 				size_t			qtd_length,
181 				uint32_t		qtd_ctrl_phase,
182 				ehci_pipe_private_t	*pp,
183 				ehci_trans_wrapper_t	*tw);
184 static void	ehci_insert_qtd_on_tw(
185 				ehci_state_t		*ehcip,
186 				ehci_trans_wrapper_t	*tw,
187 				ehci_qtd_t		*qtd);
188 static void	ehci_insert_qtd_into_active_qtd_list(
189 				ehci_state_t		*ehcip,
190 				ehci_qtd_t		*curr_qtd);
191 void		ehci_remove_qtd_from_active_qtd_list(
192 				ehci_state_t		*ehcip,
193 				ehci_qtd_t		*curr_qtd);
194 static void	ehci_traverse_qtds(
195 				ehci_state_t		*ehcip,
196 				usba_pipe_handle_data_t	*ph);
197 void		ehci_deallocate_qtd(
198 				ehci_state_t		*ehcip,
199 				ehci_qtd_t		*old_qtd);
200 uint32_t	ehci_qtd_cpu_to_iommu(
201 				ehci_state_t		*ehcip,
202 				ehci_qtd_t		*addr);
203 ehci_qtd_t	*ehci_qtd_iommu_to_cpu(
204 				ehci_state_t		*ehcip,
205 				uintptr_t		addr);
206 
207 /* Transfer Wrapper (TW) functions */
208 static ehci_trans_wrapper_t  *ehci_create_transfer_wrapper(
209 				ehci_state_t		*ehcip,
210 				ehci_pipe_private_t	*pp,
211 				size_t			length,
212 				uint_t			usb_flags);
213 int		ehci_allocate_tds_for_tw(
214 				ehci_state_t		*ehcip,
215 				ehci_pipe_private_t	*pp,
216 				ehci_trans_wrapper_t	*tw,
217 				size_t			qtd_count);
218 static ehci_trans_wrapper_t  *ehci_allocate_tw_resources(
219 				ehci_state_t		*ehcip,
220 				ehci_pipe_private_t	*pp,
221 				size_t			length,
222 				usb_flags_t		usb_flags,
223 				size_t			td_count);
224 static void	ehci_free_tw_td_resources(
225 				ehci_state_t		*ehcip,
226 				ehci_trans_wrapper_t	*tw);
227 static void	ehci_start_xfer_timer(
228 				ehci_state_t		*ehcip,
229 				ehci_pipe_private_t	*pp,
230 				ehci_trans_wrapper_t	*tw);
231 void		ehci_stop_xfer_timer(
232 				ehci_state_t		*ehcip,
233 				ehci_trans_wrapper_t	*tw,
234 				uint_t			flag);
235 static void	ehci_xfer_timeout_handler(void		*arg);
236 static void	ehci_remove_tw_from_timeout_list(
237 				ehci_state_t		*ehcip,
238 				ehci_trans_wrapper_t	*tw);
239 static void	ehci_start_timer(ehci_state_t		*ehcip,
240 				ehci_pipe_private_t	*pp);
241 void		ehci_deallocate_tw(
242 				ehci_state_t		*ehcip,
243 				ehci_pipe_private_t	*pp,
244 				ehci_trans_wrapper_t	*tw);
245 void		ehci_free_dma_resources(
246 				ehci_state_t		*ehcip,
247 				usba_pipe_handle_data_t	*ph);
248 static void	ehci_free_tw(
249 				ehci_state_t		*ehcip,
250 				ehci_pipe_private_t	*pp,
251 				ehci_trans_wrapper_t	*tw);
252 
253 /* Miscellaneous functions */
254 int		ehci_allocate_intr_in_resource(
255 				ehci_state_t		*ehcip,
256 				ehci_pipe_private_t	*pp,
257 				ehci_trans_wrapper_t	*tw,
258 				usb_flags_t		flags);
259 void		ehci_pipe_cleanup(
260 				ehci_state_t		*ehcip,
261 				usba_pipe_handle_data_t	*ph);
262 static void	ehci_wait_for_transfers_completion(
263 				ehci_state_t		*ehcip,
264 				ehci_pipe_private_t	*pp);
265 void		ehci_check_for_transfers_completion(
266 				ehci_state_t		*ehcip,
267 				ehci_pipe_private_t	*pp);
268 static void	ehci_save_data_toggle(
269 				ehci_state_t		*ehcip,
270 				usba_pipe_handle_data_t	*ph);
271 void		ehci_restore_data_toggle(
272 				ehci_state_t		*ehcip,
273 				usba_pipe_handle_data_t	*ph);
274 void		ehci_handle_outstanding_requests(
275 				ehci_state_t		*ehcip,
276 				ehci_pipe_private_t	*pp);
277 void		ehci_deallocate_intr_in_resource(
278 				ehci_state_t		*ehcip,
279 				ehci_pipe_private_t	*pp,
280 				ehci_trans_wrapper_t	*tw);
281 void		ehci_do_client_periodic_in_req_callback(
282 				ehci_state_t		*ehcip,
283 				ehci_pipe_private_t	*pp,
284 				usb_cr_t		completion_reason);
285 void		ehci_hcdi_callback(
286 				usba_pipe_handle_data_t	*ph,
287 				ehci_trans_wrapper_t	*tw,
288 				usb_cr_t		completion_reason);
289 
290 
291 /*
292  * Endpoint Descriptor (QH) manipulations functions
293  */
294 
295 /*
296  * ehci_alloc_qh:
297  *
298  * Allocate an endpoint descriptor (QH)
299  *
300  * NOTE: This function is also called from POLLED MODE.
301  */
302 ehci_qh_t *
ehci_alloc_qh(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph,uint_t flag)303 ehci_alloc_qh(
304 	ehci_state_t		*ehcip,
305 	usba_pipe_handle_data_t	*ph,
306 	uint_t			flag)
307 {
308 	int			i, state;
309 	ehci_qh_t		*qh;
310 
311 	USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl,
312 	    "ehci_alloc_qh: ph = 0x%p flag = 0x%x", (void *)ph, flag);
313 
314 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
315 
316 	/*
317 	 * If this is for a ISOC endpoint return null.
318 	 * Isochronous uses ITD put directly onto the PFL.
319 	 */
320 	if (ph) {
321 		if (EHCI_ISOC_ENDPOINT((&ph->p_ep))) {
322 
323 			return (NULL);
324 		}
325 	}
326 
327 	/*
328 	 * The first 63 endpoints in the Endpoint Descriptor (QH)
329 	 * buffer pool are reserved for building interrupt lattice
330 	 * tree. Search for a blank endpoint descriptor in the QH
331 	 * buffer pool.
332 	 */
333 	for (i = EHCI_NUM_STATIC_NODES; i < ehci_qh_pool_size; i ++) {
334 		state = Get_QH(ehcip->ehci_qh_pool_addr[i].qh_state);
335 
336 		if (state == EHCI_QH_FREE) {
337 			break;
338 		}
339 	}
340 
341 	USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl,
342 	    "ehci_alloc_qh: Allocated %d", i);
343 
344 	if (i == ehci_qh_pool_size) {
345 		USB_DPRINTF_L2(PRINT_MASK_ALLOC,  ehcip->ehci_log_hdl,
346 		    "ehci_alloc_qh: QH exhausted");
347 
348 		return (NULL);
349 	} else {
350 		qh = &ehcip->ehci_qh_pool_addr[i];
351 		bzero((void *)qh, sizeof (ehci_qh_t));
352 
353 		USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl,
354 		    "ehci_alloc_qh: Allocated address 0x%p", (void *)qh);
355 
356 		/* Check polled mode flag */
357 		if (flag == EHCI_POLLED_MODE_FLAG) {
358 			Set_QH(qh->qh_link_ptr, EHCI_QH_LINK_PTR_VALID);
359 			Set_QH(qh->qh_ctrl, EHCI_QH_CTRL_ED_INACTIVATE);
360 		}
361 
362 		/* Unpack the endpoint descriptor into a control field */
363 		if (ph) {
364 			if ((ehci_initialize_dummy(ehcip,
365 			    qh)) == USB_NO_RESOURCES) {
366 
367 				Set_QH(qh->qh_state, EHCI_QH_FREE);
368 
369 				return (NULL);
370 			}
371 
372 			ehci_unpack_endpoint(ehcip, ph, qh);
373 
374 			Set_QH(qh->qh_curr_qtd, 0);
375 			Set_QH(qh->qh_alt_next_qtd,
376 			    EHCI_QH_ALT_NEXT_QTD_PTR_VALID);
377 
378 			/* Change QH's state Active */
379 			Set_QH(qh->qh_state, EHCI_QH_ACTIVE);
380 		} else {
381 			Set_QH(qh->qh_status, EHCI_QH_STS_HALTED);
382 
383 			/* Change QH's state Static */
384 			Set_QH(qh->qh_state, EHCI_QH_STATIC);
385 		}
386 
387 		ehci_print_qh(ehcip, qh);
388 
389 		return (qh);
390 	}
391 }
392 
393 
394 /*
395  * ehci_unpack_endpoint:
396  *
397  * Unpack the information in the pipe handle and create the first byte
398  * of the Host Controller's (HC) Endpoint Descriptor (QH).
399  */
400 static void
ehci_unpack_endpoint(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph,ehci_qh_t * qh)401 ehci_unpack_endpoint(
402 	ehci_state_t		*ehcip,
403 	usba_pipe_handle_data_t	*ph,
404 	ehci_qh_t		*qh)
405 {
406 	usb_ep_descr_t		*endpoint = &ph->p_ep;
407 	uint_t			maxpacketsize, addr, xactions;
408 	uint_t			ctrl = 0, status = 0, split_ctrl = 0;
409 	usb_port_status_t	usb_port_status;
410 	usba_device_t		*usba_device = ph->p_usba_device;
411 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
412 
413 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
414 	    "ehci_unpack_endpoint:");
415 
416 	mutex_enter(&usba_device->usb_mutex);
417 	ctrl = usba_device->usb_addr;
418 	usb_port_status = usba_device->usb_port_status;
419 	mutex_exit(&usba_device->usb_mutex);
420 
421 	addr = endpoint->bEndpointAddress;
422 
423 	/* Assign the endpoint's address */
424 	ctrl |= ((addr & USB_EP_NUM_MASK) << EHCI_QH_CTRL_ED_NUMBER_SHIFT);
425 
426 	/* Assign the speed */
427 	switch (usb_port_status) {
428 	case USBA_LOW_SPEED_DEV:
429 		ctrl |= EHCI_QH_CTRL_ED_LOW_SPEED;
430 		break;
431 	case USBA_FULL_SPEED_DEV:
432 		ctrl |= EHCI_QH_CTRL_ED_FULL_SPEED;
433 		break;
434 	case USBA_HIGH_SPEED_DEV:
435 		ctrl |= EHCI_QH_CTRL_ED_HIGH_SPEED;
436 		break;
437 	}
438 
439 	switch (endpoint->bmAttributes & USB_EP_ATTR_MASK) {
440 	case USB_EP_ATTR_CONTROL:
441 		/* Assign data toggle information */
442 		ctrl |= EHCI_QH_CTRL_DATA_TOGGLE;
443 
444 		if (usb_port_status != USBA_HIGH_SPEED_DEV) {
445 			ctrl |= EHCI_QH_CTRL_CONTROL_ED_FLAG;
446 		}
447 		/* FALLTHRU */
448 	case USB_EP_ATTR_BULK:
449 		/* Maximum nak counter */
450 		ctrl |= EHCI_QH_CTRL_MAX_NC;
451 
452 		if (usb_port_status == USBA_HIGH_SPEED_DEV) {
453 			/*
454 			 * Perform ping before executing control
455 			 * and bulk transactions.
456 			 */
457 			status = EHCI_QH_STS_DO_PING;
458 		}
459 		break;
460 	case USB_EP_ATTR_INTR:
461 		/* Set start split mask */
462 		split_ctrl = (pp->pp_smask & EHCI_QH_SPLIT_CTRL_INTR_MASK);
463 
464 		/*
465 		 * Set complete split mask for low/full speed
466 		 * usb devices.
467 		 */
468 		if (usb_port_status != USBA_HIGH_SPEED_DEV) {
469 			split_ctrl |= ((pp->pp_cmask <<
470 			    EHCI_QH_SPLIT_CTRL_COMP_SHIFT) &
471 			    EHCI_QH_SPLIT_CTRL_COMP_MASK);
472 		}
473 		break;
474 	}
475 
476 	/* Get the max transactions per microframe */
477 	xactions = (endpoint->wMaxPacketSize &
478 	    USB_EP_MAX_XACTS_MASK) >>  USB_EP_MAX_XACTS_SHIFT;
479 
480 	switch (xactions) {
481 	case 0:
482 		split_ctrl |= EHCI_QH_SPLIT_CTRL_1_XACTS;
483 		break;
484 	case 1:
485 		split_ctrl |= EHCI_QH_SPLIT_CTRL_2_XACTS;
486 		break;
487 	case 2:
488 		split_ctrl |= EHCI_QH_SPLIT_CTRL_3_XACTS;
489 		break;
490 	default:
491 		split_ctrl |= EHCI_QH_SPLIT_CTRL_1_XACTS;
492 		break;
493 	}
494 
495 	/*
496 	 * For low/full speed devices, program high speed hub
497 	 * address and port number.
498 	 */
499 	if (usb_port_status != USBA_HIGH_SPEED_DEV) {
500 		mutex_enter(&usba_device->usb_mutex);
501 		split_ctrl |= ((usba_device->usb_hs_hub_addr
502 		    << EHCI_QH_SPLIT_CTRL_HUB_ADDR_SHIFT) &
503 		    EHCI_QH_SPLIT_CTRL_HUB_ADDR);
504 
505 		split_ctrl |= ((usba_device->usb_hs_hub_port
506 		    << EHCI_QH_SPLIT_CTRL_HUB_PORT_SHIFT) &
507 		    EHCI_QH_SPLIT_CTRL_HUB_PORT);
508 
509 		mutex_exit(&usba_device->usb_mutex);
510 
511 		/* Set start split transaction state */
512 		status = EHCI_QH_STS_DO_START_SPLIT;
513 	}
514 
515 	/* Assign endpoint's maxpacketsize */
516 	maxpacketsize = endpoint->wMaxPacketSize & USB_EP_MAX_PKTSZ_MASK;
517 	maxpacketsize = maxpacketsize << EHCI_QH_CTRL_MAXPKTSZ_SHIFT;
518 	ctrl |= (maxpacketsize & EHCI_QH_CTRL_MAXPKTSZ);
519 
520 	Set_QH(qh->qh_ctrl, ctrl);
521 	Set_QH(qh->qh_split_ctrl, split_ctrl);
522 	Set_QH(qh->qh_status, status);
523 }
524 
525 
526 /*
527  * ehci_insert_qh:
528  *
529  * Add the Endpoint Descriptor (QH) into the Host Controller's
530  * (HC) appropriate endpoint list.
531  */
532 void
ehci_insert_qh(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph)533 ehci_insert_qh(
534 	ehci_state_t		*ehcip,
535 	usba_pipe_handle_data_t	*ph)
536 {
537 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
538 
539 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
540 	    "ehci_insert_qh: qh=0x%p", (void *)pp->pp_qh);
541 
542 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
543 
544 	switch (ph->p_ep.bmAttributes & USB_EP_ATTR_MASK) {
545 	case USB_EP_ATTR_CONTROL:
546 	case USB_EP_ATTR_BULK:
547 		ehci_insert_async_qh(ehcip, pp);
548 		ehcip->ehci_open_async_count++;
549 		break;
550 	case USB_EP_ATTR_INTR:
551 		ehci_insert_intr_qh(ehcip, pp);
552 		ehcip->ehci_open_periodic_count++;
553 		break;
554 	case USB_EP_ATTR_ISOCH:
555 		/* ISOCH does not use QH, don't do anything but update count */
556 		ehcip->ehci_open_periodic_count++;
557 		break;
558 	}
559 }
560 
561 
562 /*
563  * ehci_insert_async_qh:
564  *
565  * Insert a control/bulk endpoint into the Host Controller's (HC)
566  * Asynchronous schedule endpoint list.
567  */
568 static void
ehci_insert_async_qh(ehci_state_t * ehcip,ehci_pipe_private_t * pp)569 ehci_insert_async_qh(
570 	ehci_state_t		*ehcip,
571 	ehci_pipe_private_t	*pp)
572 {
573 	ehci_qh_t		*qh = pp->pp_qh;
574 	ehci_qh_t		*async_head_qh;
575 	ehci_qh_t		*next_qh;
576 	uintptr_t		qh_addr;
577 
578 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
579 	    "ehci_insert_async_qh:");
580 
581 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
582 
583 	/* Make sure this QH is not already in the list */
584 	ASSERT((Get_QH(qh->qh_prev) & EHCI_QH_LINK_PTR) == 0);
585 
586 	qh_addr = ehci_qh_cpu_to_iommu(ehcip, qh);
587 
588 	/* Obtain a ptr to the head of the Async schedule list */
589 	async_head_qh = ehcip->ehci_head_of_async_sched_list;
590 
591 	if (async_head_qh == NULL) {
592 		/* Set this QH to be the "head" of the circular list */
593 		Set_QH(qh->qh_ctrl,
594 		    (Get_QH(qh->qh_ctrl) | EHCI_QH_CTRL_RECLAIM_HEAD));
595 
596 		/* Set new QH's link and previous pointer to itself */
597 		Set_QH(qh->qh_link_ptr, qh_addr | EHCI_QH_LINK_REF_QH);
598 		Set_QH(qh->qh_prev, qh_addr);
599 
600 		ehcip->ehci_head_of_async_sched_list = qh;
601 
602 		/* Set the head ptr to the new endpoint */
603 		Set_OpReg(ehci_async_list_addr, qh_addr);
604 
605 		/*
606 		 * For some reason this register might get nulled out by
607 		 * the Uli M1575 South Bridge. To workaround the hardware
608 		 * problem, check the value after write and retry if the
609 		 * last write fails.
610 		 *
611 		 * If the ASYNCLISTADDR remains "stuck" after
612 		 * EHCI_MAX_RETRY retries, then the M1575 is broken
613 		 * and is stuck in an inconsistent state and is about
614 		 * to crash the machine with a trn_oor panic when it
615 		 * does a DMA read from 0x0.  It is better to panic
616 		 * now rather than wait for the trn_oor crash; this
617 		 * way Customer Service will have a clean signature
618 		 * that indicts the M1575 chip rather than a
619 		 * mysterious and hard-to-diagnose trn_oor panic.
620 		 */
621 		if ((ehcip->ehci_vendor_id == PCI_VENDOR_ULi_M1575) &&
622 		    (ehcip->ehci_device_id == PCI_DEVICE_ULi_M1575) &&
623 		    (qh_addr != Get_OpReg(ehci_async_list_addr))) {
624 			int retry = 0;
625 
626 			Set_OpRegRetry(ehci_async_list_addr, qh_addr, retry);
627 			if (retry >= EHCI_MAX_RETRY)
628 				cmn_err(CE_PANIC, "ehci_insert_async_qh:"
629 				    " ASYNCLISTADDR write failed.");
630 
631 			USB_DPRINTF_L2(PRINT_MASK_ATTA, ehcip->ehci_log_hdl,
632 			    "ehci_insert_async_qh: ASYNCLISTADDR "
633 			    "write failed, retry=%d", retry);
634 		}
635 	} else {
636 		ASSERT(Get_QH(async_head_qh->qh_ctrl) &
637 		    EHCI_QH_CTRL_RECLAIM_HEAD);
638 
639 		/* Ensure this QH's "H" bit is not set */
640 		Set_QH(qh->qh_ctrl,
641 		    (Get_QH(qh->qh_ctrl) & ~EHCI_QH_CTRL_RECLAIM_HEAD));
642 
643 		next_qh = ehci_qh_iommu_to_cpu(ehcip,
644 		    Get_QH(async_head_qh->qh_link_ptr) & EHCI_QH_LINK_PTR);
645 
646 		/* Set new QH's link and previous pointers */
647 		Set_QH(qh->qh_link_ptr,
648 		    Get_QH(async_head_qh->qh_link_ptr) | EHCI_QH_LINK_REF_QH);
649 		Set_QH(qh->qh_prev, ehci_qh_cpu_to_iommu(ehcip, async_head_qh));
650 
651 		/* Set next QH's prev pointer */
652 		Set_QH(next_qh->qh_prev, ehci_qh_cpu_to_iommu(ehcip, qh));
653 
654 		/* Set QH Head's link pointer points to new QH */
655 		Set_QH(async_head_qh->qh_link_ptr,
656 		    qh_addr | EHCI_QH_LINK_REF_QH);
657 	}
658 }
659 
660 
661 /*
662  * ehci_insert_intr_qh:
663  *
664  * Insert a interrupt endpoint into the Host Controller's (HC) interrupt
665  * lattice tree.
666  */
667 static void
ehci_insert_intr_qh(ehci_state_t * ehcip,ehci_pipe_private_t * pp)668 ehci_insert_intr_qh(
669 	ehci_state_t		*ehcip,
670 	ehci_pipe_private_t	*pp)
671 {
672 	ehci_qh_t		*qh = pp->pp_qh;
673 	ehci_qh_t		*next_lattice_qh, *lattice_qh;
674 	uint_t			hnode;
675 
676 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
677 	    "ehci_insert_intr_qh:");
678 
679 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
680 
681 	/* Make sure this QH is not already in the list */
682 	ASSERT((Get_QH(qh->qh_prev) & EHCI_QH_LINK_PTR) == 0);
683 
684 	/*
685 	 * The appropriate high speed node was found
686 	 * during the opening of the pipe.
687 	 */
688 	hnode = pp->pp_pnode;
689 
690 	/* Find the lattice endpoint */
691 	lattice_qh = &ehcip->ehci_qh_pool_addr[hnode];
692 
693 	/* Find the next lattice endpoint */
694 	next_lattice_qh = ehci_qh_iommu_to_cpu(
695 	    ehcip, (Get_QH(lattice_qh->qh_link_ptr) & EHCI_QH_LINK_PTR));
696 
697 	/* Update the previous pointer */
698 	Set_QH(qh->qh_prev, ehci_qh_cpu_to_iommu(ehcip, lattice_qh));
699 
700 	/* Check next_lattice_qh value */
701 	if (next_lattice_qh) {
702 		/* Update this qh to point to the next one in the lattice */
703 		Set_QH(qh->qh_link_ptr, Get_QH(lattice_qh->qh_link_ptr));
704 
705 		/* Update the previous pointer of qh->qh_link_ptr */
706 		if (Get_QH(next_lattice_qh->qh_state) != EHCI_QH_STATIC) {
707 			Set_QH(next_lattice_qh->qh_prev,
708 			    ehci_qh_cpu_to_iommu(ehcip, qh));
709 		}
710 	} else {
711 		/* Update qh's link pointer to terminate periodic list */
712 		Set_QH(qh->qh_link_ptr,
713 		    (Get_QH(lattice_qh->qh_link_ptr) | EHCI_QH_LINK_PTR_VALID));
714 	}
715 
716 	/* Insert this endpoint into the lattice */
717 	Set_QH(lattice_qh->qh_link_ptr,
718 	    (ehci_qh_cpu_to_iommu(ehcip, qh) | EHCI_QH_LINK_REF_QH));
719 }
720 
721 
722 /*
723  * ehci_modify_qh_status_bit:
724  *
725  * Modify the halt bit on the Host Controller (HC) Endpoint Descriptor (QH).
726  *
727  * If several threads try to halt the same pipe, they will need to wait on
728  * a condition variable.  Only one thread is allowed to halt or unhalt the
729  * pipe at a time.
730  *
731  * Usually after a halt pipe, an unhalt pipe will follow soon after.  There
732  * is an assumption that an Unhalt pipe will never occur without a halt pipe.
733  */
734 static void
ehci_modify_qh_status_bit(ehci_state_t * ehcip,ehci_pipe_private_t * pp,halt_bit_t action)735 ehci_modify_qh_status_bit(
736 	ehci_state_t		*ehcip,
737 	ehci_pipe_private_t	*pp,
738 	halt_bit_t		action)
739 {
740 	ehci_qh_t		*qh = pp->pp_qh;
741 	uint_t			smask, eps, split_intr_qh;
742 	uint_t			status;
743 
744 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
745 	    "ehci_modify_qh_status_bit: action=0x%x qh=0x%p",
746 	    action, (void *)qh);
747 
748 	ehci_print_qh(ehcip, qh);
749 
750 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
751 
752 	/*
753 	 * If this pipe is in the middle of halting don't allow another
754 	 * thread to come in and modify the same pipe.
755 	 */
756 	while (pp->pp_halt_state & EHCI_HALT_STATE_HALTING) {
757 
758 		cv_wait(&pp->pp_halt_cmpl_cv,
759 		    &ehcip->ehci_int_mutex);
760 	}
761 
762 	/* Sync the QH QTD pool to get up to date information */
763 	Sync_QH_QTD_Pool(ehcip);
764 
765 
766 	if (action == CLEAR_HALT) {
767 		/*
768 		 * If the halt bit is to be cleared, just clear it.
769 		 * there shouldn't be any race condition problems.
770 		 * If the host controller reads the bit before the
771 		 * driver has a chance to set the bit, the bit will
772 		 * be reread on the next frame.
773 		 */
774 		Set_QH(qh->qh_ctrl,
775 		    (Get_QH(qh->qh_ctrl) & ~EHCI_QH_CTRL_ED_INACTIVATE));
776 		Set_QH(qh->qh_status,
777 		    Get_QH(qh->qh_status) & ~(EHCI_QH_STS_XACT_STATUS));
778 
779 		goto success;
780 	}
781 
782 	/* Halt the the QH, but first check to see if it is already halted */
783 	status = Get_QH(qh->qh_status);
784 	if (!(status & EHCI_QH_STS_HALTED)) {
785 		/* Indicate that this pipe is in the middle of halting. */
786 		pp->pp_halt_state |= EHCI_HALT_STATE_HALTING;
787 
788 		/*
789 		 * Find out if this is an full/low speed interrupt endpoint.
790 		 * A non-zero Cmask indicates that this QH is an interrupt
791 		 * endpoint.  Check the endpoint speed to see if it is either
792 		 * FULL or LOW .
793 		 */
794 		smask = Get_QH(qh->qh_split_ctrl) &
795 		    EHCI_QH_SPLIT_CTRL_INTR_MASK;
796 		eps = Get_QH(qh->qh_ctrl) & EHCI_QH_CTRL_ED_SPEED;
797 		split_intr_qh = ((smask != 0) &&
798 		    (eps != EHCI_QH_CTRL_ED_HIGH_SPEED));
799 
800 		if (eps == EHCI_QH_CTRL_ED_HIGH_SPEED) {
801 			ehci_halt_hs_qh(ehcip, pp, qh);
802 		} else {
803 			if (split_intr_qh) {
804 				ehci_halt_fls_intr_qh(ehcip, qh);
805 			} else {
806 				ehci_halt_fls_ctrl_and_bulk_qh(ehcip, pp, qh);
807 			}
808 		}
809 
810 		/* Indicate that this pipe is not in the middle of halting. */
811 		pp->pp_halt_state &= ~EHCI_HALT_STATE_HALTING;
812 	}
813 
814 	/* Sync the QH QTD pool again to get the most up to date information */
815 	Sync_QH_QTD_Pool(ehcip);
816 
817 	ehci_print_qh(ehcip, qh);
818 
819 	status = Get_QH(qh->qh_status);
820 	if (!(status & EHCI_QH_STS_HALTED)) {
821 		USB_DPRINTF_L1(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
822 		    "ehci_modify_qh_status_bit: Failed to halt qh=0x%p",
823 		    (void *)qh);
824 
825 		ehci_print_qh(ehcip, qh);
826 
827 		/* Set host controller soft state to error */
828 		ehcip->ehci_hc_soft_state = EHCI_CTLR_ERROR_STATE;
829 
830 		ASSERT(status & EHCI_QH_STS_HALTED);
831 	}
832 
833 success:
834 	/* Wake up threads waiting for this pipe to be halted. */
835 	cv_signal(&pp->pp_halt_cmpl_cv);
836 }
837 
838 
839 /*
840  * ehci_halt_hs_qh:
841  *
842  * Halts all types of HIGH SPEED QHs.
843  */
844 static void
ehci_halt_hs_qh(ehci_state_t * ehcip,ehci_pipe_private_t * pp,ehci_qh_t * qh)845 ehci_halt_hs_qh(
846 	ehci_state_t		*ehcip,
847 	ehci_pipe_private_t	*pp,
848 	ehci_qh_t		*qh)
849 {
850 	usba_pipe_handle_data_t	*ph = pp->pp_pipe_handle;
851 
852 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
853 	    "ehci_halt_hs_qh:");
854 
855 	/* Remove this qh from the HCD's view, but do not reclaim it */
856 	ehci_remove_qh(ehcip, pp, B_FALSE);
857 	ehci_toggle_scheduler_on_pipe(ehcip);
858 
859 	/*
860 	 * Wait for atleast one SOF, just in case the HCD is in the
861 	 * middle accessing this QH.
862 	 */
863 	(void) ehci_wait_for_sof(ehcip);
864 
865 	/* Sync the QH QTD pool to get up to date information */
866 	Sync_QH_QTD_Pool(ehcip);
867 
868 	/* Modify the status bit and halt this QH. */
869 	Set_QH(qh->qh_status,
870 	    ((Get_QH(qh->qh_status) &
871 	    ~(EHCI_QH_STS_ACTIVE)) | EHCI_QH_STS_HALTED));
872 
873 	/* Insert this QH back into the HCD's view */
874 	ehci_insert_qh(ehcip, ph);
875 	ehci_toggle_scheduler_on_pipe(ehcip);
876 }
877 
878 
879 /*
880  * ehci_halt_fls_ctrl_and_bulk_qh:
881  *
882  * Halts FULL/LOW Ctrl and Bulk QHs only.
883  */
884 static void
ehci_halt_fls_ctrl_and_bulk_qh(ehci_state_t * ehcip,ehci_pipe_private_t * pp,ehci_qh_t * qh)885 ehci_halt_fls_ctrl_and_bulk_qh(
886 	ehci_state_t		*ehcip,
887 	ehci_pipe_private_t	*pp,
888 	ehci_qh_t		*qh)
889 {
890 	usba_pipe_handle_data_t	*ph = pp->pp_pipe_handle;
891 	uint_t			status, split_status, bytes_left;
892 
893 
894 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
895 	    "ehci_halt_fls_ctrl_and_bulk_qh:");
896 
897 	/* Remove this qh from the HCD's view, but do not reclaim it */
898 	ehci_remove_qh(ehcip, pp, B_FALSE);
899 	ehci_toggle_scheduler_on_pipe(ehcip);
900 
901 	/*
902 	 * Wait for atleast one SOF, just in case the HCD is in the
903 	 * middle accessing this QH.
904 	 */
905 	(void) ehci_wait_for_sof(ehcip);
906 
907 	/* Sync the QH QTD pool to get up to date information */
908 	Sync_QH_QTD_Pool(ehcip);
909 
910 	/* Modify the status bit and halt this QH. */
911 	Set_QH(qh->qh_status,
912 	    ((Get_QH(qh->qh_status) &
913 	    ~(EHCI_QH_STS_ACTIVE)) | EHCI_QH_STS_HALTED));
914 
915 	/* Check to see if the QH was in the middle of a transaction */
916 	status = Get_QH(qh->qh_status);
917 	split_status = status & EHCI_QH_STS_SPLIT_XSTATE;
918 	bytes_left = status & EHCI_QH_STS_BYTES_TO_XFER;
919 	if ((split_status == EHCI_QH_STS_DO_COMPLETE_SPLIT) &&
920 	    (bytes_left != 0)) {
921 		/* send ClearTTBuffer to this device's parent 2.0 hub */
922 		ehci_clear_tt_buffer(ehcip, ph, qh);
923 	}
924 
925 	/* Insert this QH back into the HCD's view */
926 	ehci_insert_qh(ehcip, ph);
927 	ehci_toggle_scheduler_on_pipe(ehcip);
928 }
929 
930 
931 /*
932  * ehci_clear_tt_buffer
933  *
934  * This function will sent a Clear_TT_Buffer request to the pipe's
935  * parent 2.0 hub.
936  */
937 static void
ehci_clear_tt_buffer(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph,ehci_qh_t * qh)938 ehci_clear_tt_buffer(
939 	ehci_state_t		*ehcip,
940 	usba_pipe_handle_data_t	*ph,
941 	ehci_qh_t		*qh)
942 {
943 	usba_device_t		*usba_device;
944 	usba_device_t		*hub_usba_device;
945 	usb_pipe_handle_t	hub_def_ph;
946 	usb_ep_descr_t		*eptd;
947 	uchar_t			attributes;
948 	uint16_t		wValue;
949 	usb_ctrl_setup_t	setup;
950 	usb_cr_t		completion_reason;
951 	usb_cb_flags_t		cb_flags;
952 	int			retry;
953 
954 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
955 	    "ehci_clear_tt_buffer: ");
956 
957 	/* Get some information about the current pipe */
958 	usba_device = ph->p_usba_device;
959 	eptd = &ph->p_ep;
960 	attributes = eptd->bmAttributes & USB_EP_ATTR_MASK;
961 
962 	/*
963 	 * Create the wIndex for this request (usb spec 11.24.2.3)
964 	 * 3..0		Endpoint Number
965 	 * 10..4	Device Address
966 	 * 12..11	Endpoint Type
967 	 * 14..13	Reserved (must be 0)
968 	 * 15		Direction 1 = IN, 0 = OUT
969 	 */
970 	wValue = 0;
971 	if ((eptd->bEndpointAddress & USB_EP_DIR_MASK) == USB_EP_DIR_IN) {
972 		wValue |= 0x8000;
973 	}
974 	wValue |= attributes << 11;
975 	wValue |= (Get_QH(qh->qh_ctrl) & EHCI_QH_CTRL_DEVICE_ADDRESS) << 4;
976 	wValue |= (Get_QH(qh->qh_ctrl) & EHCI_QH_CTRL_ED_HIGH_SPEED) >>
977 	    EHCI_QH_CTRL_ED_NUMBER_SHIFT;
978 
979 	mutex_exit(&ehcip->ehci_int_mutex);
980 
981 	/* Manually fill in the request. */
982 	setup.bmRequestType = EHCI_CLEAR_TT_BUFFER_REQTYPE;
983 	setup.bRequest = EHCI_CLEAR_TT_BUFFER_BREQ;
984 	setup.wValue = wValue;
985 	setup.wIndex = 1;
986 	setup.wLength = 0;
987 	setup.attrs = USB_ATTRS_NONE;
988 
989 	/* Get the usba_device of the parent 2.0 hub. */
990 	mutex_enter(&usba_device->usb_mutex);
991 	hub_usba_device = usba_device->usb_hs_hub_usba_dev;
992 	mutex_exit(&usba_device->usb_mutex);
993 
994 	/* Get the default ctrl pipe for the parent 2.0 hub */
995 	mutex_enter(&hub_usba_device->usb_mutex);
996 	hub_def_ph = (usb_pipe_handle_t)&hub_usba_device->usb_ph_list[0];
997 	mutex_exit(&hub_usba_device->usb_mutex);
998 
999 	for (retry = 0; retry < 3; retry++) {
1000 
1001 		/* sync send the request to the default pipe */
1002 		if (usb_pipe_ctrl_xfer_wait(
1003 		    hub_def_ph,
1004 		    &setup,
1005 		    NULL,
1006 		    &completion_reason, &cb_flags, 0) == USB_SUCCESS) {
1007 
1008 			break;
1009 		}
1010 
1011 		USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
1012 		    "ehci_clear_tt_buffer: Failed to clear tt buffer,"
1013 		    "retry = %d, cr = %d, cb_flags = 0x%x\n",
1014 		    retry, completion_reason, cb_flags);
1015 	}
1016 
1017 	if (retry >= 3) {
1018 		char *path = kmem_alloc(MAXPATHLEN, KM_SLEEP);
1019 		dev_info_t *dip = hub_usba_device->usb_dip;
1020 
1021 		/*
1022 		 * Ask the user to hotplug the 2.0 hub, to make sure that
1023 		 * all the buffer is in sync since this command has failed.
1024 		 */
1025 		USB_DPRINTF_L0(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
1026 		    "Error recovery failure: Please hotplug the 2.0 hub at"
1027 		    "%s", ddi_pathname(dip, path));
1028 
1029 		kmem_free(path, MAXPATHLEN);
1030 	}
1031 
1032 	mutex_enter(&ehcip->ehci_int_mutex);
1033 }
1034 
1035 /*
1036  * ehci_halt_fls_intr_qh:
1037  *
1038  * Halts FULL/LOW speed Intr QHs.
1039  */
1040 static void
ehci_halt_fls_intr_qh(ehci_state_t * ehcip,ehci_qh_t * qh)1041 ehci_halt_fls_intr_qh(
1042 	ehci_state_t		*ehcip,
1043 	ehci_qh_t		*qh)
1044 {
1045 	usb_frame_number_t	starting_frame;
1046 	usb_frame_number_t	frames_past;
1047 	uint_t			status, i;
1048 
1049 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
1050 	    "ehci_halt_fls_intr_qh:");
1051 
1052 	/*
1053 	 * Ask the HC to deactivate the QH in a
1054 	 * full/low periodic QH.
1055 	 */
1056 	Set_QH(qh->qh_ctrl,
1057 	    (Get_QH(qh->qh_ctrl) | EHCI_QH_CTRL_ED_INACTIVATE));
1058 
1059 	starting_frame = ehci_get_current_frame_number(ehcip);
1060 
1061 	/*
1062 	 * Wait at least EHCI_NUM_INTR_QH_LISTS+2 frame or until
1063 	 * the QH has been halted.
1064 	 */
1065 	Sync_QH_QTD_Pool(ehcip);
1066 	frames_past = 0;
1067 	status = Get_QH(qh->qh_status) & EHCI_QTD_CTRL_ACTIVE_XACT;
1068 
1069 	while ((frames_past <= (EHCI_NUM_INTR_QH_LISTS + 2)) &&
1070 	    (status != 0)) {
1071 
1072 		(void) ehci_wait_for_sof(ehcip);
1073 
1074 		Sync_QH_QTD_Pool(ehcip);
1075 		status = Get_QH(qh->qh_status) & EHCI_QTD_CTRL_ACTIVE_XACT;
1076 		frames_past = ehci_get_current_frame_number(ehcip) -
1077 		    starting_frame;
1078 	}
1079 
1080 	/* Modify the status bit and halt this QH. */
1081 	Sync_QH_QTD_Pool(ehcip);
1082 
1083 	status = Get_QH(qh->qh_status);
1084 
1085 	for (i = 0; i < EHCI_NUM_INTR_QH_LISTS; i++) {
1086 		Set_QH(qh->qh_status,
1087 		    ((Get_QH(qh->qh_status) &
1088 		    ~(EHCI_QH_STS_ACTIVE)) | EHCI_QH_STS_HALTED));
1089 
1090 		Sync_QH_QTD_Pool(ehcip);
1091 
1092 		(void) ehci_wait_for_sof(ehcip);
1093 		Sync_QH_QTD_Pool(ehcip);
1094 
1095 		if (Get_QH(qh->qh_status) & EHCI_QH_STS_HALTED) {
1096 
1097 			break;
1098 		}
1099 	}
1100 
1101 	Sync_QH_QTD_Pool(ehcip);
1102 
1103 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
1104 	    "ehci_halt_fls_intr_qh: qh=0x%p frames past=%llu,"
1105 	    " status=0x%x, 0x%x", (void *)qh,
1106 	    (unsigned long long)(ehci_get_current_frame_number(ehcip) -
1107 	    starting_frame), status, Get_QH(qh->qh_status));
1108 }
1109 
1110 
1111 /*
1112  * ehci_remove_qh:
1113  *
1114  * Remove the Endpoint Descriptor (QH) from the Host Controller's appropriate
1115  * endpoint list.
1116  */
1117 void
ehci_remove_qh(ehci_state_t * ehcip,ehci_pipe_private_t * pp,boolean_t reclaim)1118 ehci_remove_qh(
1119 	ehci_state_t		*ehcip,
1120 	ehci_pipe_private_t	*pp,
1121 	boolean_t		reclaim)
1122 {
1123 	uchar_t			attributes;
1124 
1125 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
1126 
1127 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
1128 	    "ehci_remove_qh: qh=0x%p", (void *)pp->pp_qh);
1129 
1130 	attributes = pp->pp_pipe_handle->p_ep.bmAttributes & USB_EP_ATTR_MASK;
1131 
1132 	switch (attributes) {
1133 	case USB_EP_ATTR_CONTROL:
1134 	case USB_EP_ATTR_BULK:
1135 		ehci_remove_async_qh(ehcip, pp, reclaim);
1136 		ehcip->ehci_open_async_count--;
1137 		break;
1138 	case USB_EP_ATTR_INTR:
1139 		ehci_remove_intr_qh(ehcip, pp, reclaim);
1140 		ehcip->ehci_open_periodic_count--;
1141 		break;
1142 	case USB_EP_ATTR_ISOCH:
1143 		/* ISOCH does not use QH, don't do anything but update count */
1144 		ehcip->ehci_open_periodic_count--;
1145 		break;
1146 	}
1147 }
1148 
1149 
1150 /*
1151  * ehci_remove_async_qh:
1152  *
1153  * Remove a control/bulk endpoint into the Host Controller's (HC)
1154  * Asynchronous schedule endpoint list.
1155  */
1156 static void
ehci_remove_async_qh(ehci_state_t * ehcip,ehci_pipe_private_t * pp,boolean_t reclaim)1157 ehci_remove_async_qh(
1158 	ehci_state_t		*ehcip,
1159 	ehci_pipe_private_t	*pp,
1160 	boolean_t		reclaim)
1161 {
1162 	ehci_qh_t		*qh = pp->pp_qh; /* qh to be removed */
1163 	ehci_qh_t		*prev_qh, *next_qh;
1164 
1165 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
1166 	    "ehci_remove_async_qh:");
1167 
1168 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
1169 
1170 	prev_qh = ehci_qh_iommu_to_cpu(ehcip,
1171 	    Get_QH(qh->qh_prev) & EHCI_QH_LINK_PTR);
1172 	next_qh = ehci_qh_iommu_to_cpu(ehcip,
1173 	    Get_QH(qh->qh_link_ptr) & EHCI_QH_LINK_PTR);
1174 
1175 	/* Make sure this QH is in the list */
1176 	ASSERT(prev_qh != NULL);
1177 
1178 	/*
1179 	 * If next QH and current QH are the same, then this is the last
1180 	 * QH on the Asynchronous Schedule list.
1181 	 */
1182 	if (qh == next_qh) {
1183 		ASSERT(Get_QH(qh->qh_ctrl) & EHCI_QH_CTRL_RECLAIM_HEAD);
1184 		/*
1185 		 * Null our pointer to the async sched list, but do not
1186 		 * touch the host controller's list_addr.
1187 		 */
1188 		ehcip->ehci_head_of_async_sched_list = NULL;
1189 		ASSERT(ehcip->ehci_open_async_count == 1);
1190 	} else {
1191 		/* If this QH is the HEAD then find another one to replace it */
1192 		if (ehcip->ehci_head_of_async_sched_list == qh) {
1193 
1194 			ASSERT(Get_QH(qh->qh_ctrl) & EHCI_QH_CTRL_RECLAIM_HEAD);
1195 			ehcip->ehci_head_of_async_sched_list = next_qh;
1196 			Set_QH(next_qh->qh_ctrl,
1197 			    Get_QH(next_qh->qh_ctrl) |
1198 			    EHCI_QH_CTRL_RECLAIM_HEAD);
1199 		}
1200 		Set_QH(prev_qh->qh_link_ptr, Get_QH(qh->qh_link_ptr));
1201 		Set_QH(next_qh->qh_prev, Get_QH(qh->qh_prev));
1202 	}
1203 
1204 	/* qh_prev to indicate it is no longer in the circular list */
1205 	Set_QH(qh->qh_prev, 0);
1206 
1207 	if (reclaim) {
1208 		ehci_insert_qh_on_reclaim_list(ehcip, pp);
1209 	}
1210 }
1211 
1212 
1213 /*
1214  * ehci_remove_intr_qh:
1215  *
1216  * Set up an interrupt endpoint to be removed from the Host Controller's (HC)
1217  * interrupt lattice tree. The Endpoint Descriptor (QH) will be freed in the
1218  * interrupt handler.
1219  */
1220 static void
ehci_remove_intr_qh(ehci_state_t * ehcip,ehci_pipe_private_t * pp,boolean_t reclaim)1221 ehci_remove_intr_qh(
1222 	ehci_state_t		*ehcip,
1223 	ehci_pipe_private_t	*pp,
1224 	boolean_t		reclaim)
1225 {
1226 	ehci_qh_t		*qh = pp->pp_qh; /* qh to be removed */
1227 	ehci_qh_t		*prev_qh, *next_qh;
1228 
1229 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
1230 	    "ehci_remove_intr_qh:");
1231 
1232 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
1233 
1234 	prev_qh = ehci_qh_iommu_to_cpu(ehcip, Get_QH(qh->qh_prev));
1235 	next_qh = ehci_qh_iommu_to_cpu(ehcip,
1236 	    Get_QH(qh->qh_link_ptr) & EHCI_QH_LINK_PTR);
1237 
1238 	/* Make sure this QH is in the list */
1239 	ASSERT(prev_qh != NULL);
1240 
1241 	if (next_qh) {
1242 		/* Update previous qh's link pointer */
1243 		Set_QH(prev_qh->qh_link_ptr, Get_QH(qh->qh_link_ptr));
1244 
1245 		if (Get_QH(next_qh->qh_state) != EHCI_QH_STATIC) {
1246 			/* Set the previous pointer of the next one */
1247 			Set_QH(next_qh->qh_prev, Get_QH(qh->qh_prev));
1248 		}
1249 	} else {
1250 		/* Update previous qh's link pointer */
1251 		Set_QH(prev_qh->qh_link_ptr,
1252 		    (Get_QH(qh->qh_link_ptr) | EHCI_QH_LINK_PTR_VALID));
1253 	}
1254 
1255 	/* qh_prev to indicate it is no longer in the circular list */
1256 	Set_QH(qh->qh_prev, 0);
1257 
1258 	if (reclaim) {
1259 		ehci_insert_qh_on_reclaim_list(ehcip, pp);
1260 	}
1261 }
1262 
1263 
1264 /*
1265  * ehci_insert_qh_on_reclaim_list:
1266  *
1267  * Insert Endpoint onto the reclaim list
1268  */
1269 static void
ehci_insert_qh_on_reclaim_list(ehci_state_t * ehcip,ehci_pipe_private_t * pp)1270 ehci_insert_qh_on_reclaim_list(
1271 	ehci_state_t		*ehcip,
1272 	ehci_pipe_private_t	*pp)
1273 {
1274 	ehci_qh_t		*qh = pp->pp_qh; /* qh to be removed */
1275 	ehci_qh_t		*next_qh, *prev_qh;
1276 	usb_frame_number_t	frame_number;
1277 
1278 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
1279 
1280 	/*
1281 	 * Read current usb frame number and add appropriate number of
1282 	 * usb frames needs to wait before reclaiming current endpoint.
1283 	 */
1284 	frame_number =
1285 	    ehci_get_current_frame_number(ehcip) + MAX_SOF_WAIT_COUNT;
1286 
1287 	/* Store 32-bit ID */
1288 	Set_QH(qh->qh_reclaim_frame,
1289 	    ((uint32_t)(EHCI_GET_ID((void *)(uintptr_t)frame_number))));
1290 
1291 	/* Insert the endpoint onto the reclamation list */
1292 	if (ehcip->ehci_reclaim_list) {
1293 		next_qh = ehcip->ehci_reclaim_list;
1294 
1295 		while (next_qh) {
1296 			prev_qh = next_qh;
1297 			next_qh = ehci_qh_iommu_to_cpu(ehcip,
1298 			    Get_QH(next_qh->qh_reclaim_next));
1299 		}
1300 
1301 		Set_QH(prev_qh->qh_reclaim_next,
1302 		    ehci_qh_cpu_to_iommu(ehcip, qh));
1303 	} else {
1304 		ehcip->ehci_reclaim_list = qh;
1305 	}
1306 
1307 	ASSERT(Get_QH(qh->qh_reclaim_next) == 0);
1308 }
1309 
1310 
1311 /*
1312  * ehci_deallocate_qh:
1313  *
1314  * Deallocate a Host Controller's (HC) Endpoint Descriptor (QH).
1315  *
1316  * NOTE: This function is also called from POLLED MODE.
1317  */
1318 void
ehci_deallocate_qh(ehci_state_t * ehcip,ehci_qh_t * old_qh)1319 ehci_deallocate_qh(
1320 	ehci_state_t	*ehcip,
1321 	ehci_qh_t	*old_qh)
1322 {
1323 	ehci_qtd_t	*first_dummy_qtd, *second_dummy_qtd;
1324 
1325 	USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl,
1326 	    "ehci_deallocate_qh:");
1327 
1328 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
1329 
1330 	first_dummy_qtd = ehci_qtd_iommu_to_cpu(ehcip,
1331 	    (Get_QH(old_qh->qh_next_qtd) & EHCI_QH_NEXT_QTD_PTR));
1332 
1333 	if (first_dummy_qtd) {
1334 		ASSERT(Get_QTD(first_dummy_qtd->qtd_state) == EHCI_QTD_DUMMY);
1335 
1336 		second_dummy_qtd = ehci_qtd_iommu_to_cpu(ehcip,
1337 		    Get_QTD(first_dummy_qtd->qtd_next_qtd));
1338 
1339 		if (second_dummy_qtd) {
1340 			ASSERT(Get_QTD(second_dummy_qtd->qtd_state) ==
1341 			    EHCI_QTD_DUMMY);
1342 
1343 			ehci_deallocate_qtd(ehcip, second_dummy_qtd);
1344 		}
1345 
1346 		ehci_deallocate_qtd(ehcip, first_dummy_qtd);
1347 	}
1348 
1349 	USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl,
1350 	    "ehci_deallocate_qh: Deallocated 0x%p", (void *)old_qh);
1351 
1352 	Set_QH(old_qh->qh_state, EHCI_QH_FREE);
1353 }
1354 
1355 
1356 /*
1357  * ehci_qh_cpu_to_iommu:
1358  *
1359  * This function converts for the given Endpoint Descriptor (QH) CPU address
1360  * to IO address.
1361  *
1362  * NOTE: This function is also called from POLLED MODE.
1363  */
1364 uint32_t
ehci_qh_cpu_to_iommu(ehci_state_t * ehcip,ehci_qh_t * addr)1365 ehci_qh_cpu_to_iommu(
1366 	ehci_state_t	*ehcip,
1367 	ehci_qh_t	*addr)
1368 {
1369 	uint32_t	qh;
1370 
1371 	qh = (uint32_t)ehcip->ehci_qh_pool_cookie.dmac_address +
1372 	    (uint32_t)((uintptr_t)addr - (uintptr_t)(ehcip->ehci_qh_pool_addr));
1373 
1374 	ASSERT(qh >= ehcip->ehci_qh_pool_cookie.dmac_address);
1375 	ASSERT(qh <= ehcip->ehci_qh_pool_cookie.dmac_address +
1376 	    sizeof (ehci_qh_t) * ehci_qh_pool_size);
1377 
1378 	return (qh);
1379 }
1380 
1381 
1382 /*
1383  * ehci_qh_iommu_to_cpu:
1384  *
1385  * This function converts for the given Endpoint Descriptor (QH) IO address
1386  * to CPU address.
1387  */
1388 ehci_qh_t *
ehci_qh_iommu_to_cpu(ehci_state_t * ehcip,uintptr_t addr)1389 ehci_qh_iommu_to_cpu(
1390 	ehci_state_t	*ehcip,
1391 	uintptr_t	addr)
1392 {
1393 	ehci_qh_t	*qh;
1394 
1395 	if (addr == 0)
1396 		return (NULL);
1397 
1398 	qh = (ehci_qh_t *)((uintptr_t)
1399 	    (addr - ehcip->ehci_qh_pool_cookie.dmac_address) +
1400 	    (uintptr_t)ehcip->ehci_qh_pool_addr);
1401 
1402 	ASSERT(qh >= ehcip->ehci_qh_pool_addr);
1403 	ASSERT((uintptr_t)qh <= (uintptr_t)ehcip->ehci_qh_pool_addr +
1404 	    (uintptr_t)(sizeof (ehci_qh_t) * ehci_qh_pool_size));
1405 
1406 	return (qh);
1407 }
1408 
1409 
1410 /*
1411  * Transfer Descriptor manipulations functions
1412  */
1413 
1414 /*
1415  * ehci_initialize_dummy:
1416  *
1417  * An Endpoint Descriptor (QH) has a  dummy Transfer Descriptor (QTD) on the
1418  * end of its QTD list. Initially, both the head and tail pointers of the QH
1419  * point to the dummy QTD.
1420  */
1421 static int
ehci_initialize_dummy(ehci_state_t * ehcip,ehci_qh_t * qh)1422 ehci_initialize_dummy(
1423 	ehci_state_t	*ehcip,
1424 	ehci_qh_t	*qh)
1425 {
1426 	ehci_qtd_t	*first_dummy_qtd, *second_dummy_qtd;
1427 
1428 	/* Allocate first dummy QTD */
1429 	first_dummy_qtd = ehci_allocate_qtd_from_pool(ehcip);
1430 
1431 	if (first_dummy_qtd == NULL) {
1432 		return (USB_NO_RESOURCES);
1433 	}
1434 
1435 	/* Allocate second dummy QTD */
1436 	second_dummy_qtd = ehci_allocate_qtd_from_pool(ehcip);
1437 
1438 	if (second_dummy_qtd == NULL) {
1439 		/* Deallocate first dummy QTD */
1440 		ehci_deallocate_qtd(ehcip, first_dummy_qtd);
1441 
1442 		return (USB_NO_RESOURCES);
1443 	}
1444 
1445 	/* Next QTD pointer of an QH point to this new dummy QTD */
1446 	Set_QH(qh->qh_next_qtd, ehci_qtd_cpu_to_iommu(ehcip,
1447 	    first_dummy_qtd) & EHCI_QH_NEXT_QTD_PTR);
1448 
1449 	/* Set qh's dummy qtd field */
1450 	Set_QH(qh->qh_dummy_qtd, ehci_qtd_cpu_to_iommu(ehcip, first_dummy_qtd));
1451 
1452 	/* Set first_dummy's next qtd pointer */
1453 	Set_QTD(first_dummy_qtd->qtd_next_qtd,
1454 	    ehci_qtd_cpu_to_iommu(ehcip, second_dummy_qtd));
1455 
1456 	return (USB_SUCCESS);
1457 }
1458 
1459 /*
1460  * ehci_allocate_ctrl_resources:
1461  *
1462  * Calculates the number of tds necessary for a ctrl transfer, and allocates
1463  * all the resources necessary.
1464  *
1465  * Returns NULL if there is insufficient resources otherwise TW.
1466  */
1467 ehci_trans_wrapper_t *
ehci_allocate_ctrl_resources(ehci_state_t * ehcip,ehci_pipe_private_t * pp,usb_ctrl_req_t * ctrl_reqp,usb_flags_t usb_flags)1468 ehci_allocate_ctrl_resources(
1469 	ehci_state_t		*ehcip,
1470 	ehci_pipe_private_t	*pp,
1471 	usb_ctrl_req_t		*ctrl_reqp,
1472 	usb_flags_t		usb_flags)
1473 {
1474 	size_t			qtd_count = 2;
1475 	size_t			ctrl_buf_size;
1476 	ehci_trans_wrapper_t	*tw;
1477 
1478 	/* Add one more td for data phase */
1479 	if (ctrl_reqp->ctrl_wLength) {
1480 		qtd_count += 1;
1481 	}
1482 
1483 	/*
1484 	 * If we have a control data phase, the data buffer starts
1485 	 * on the next 4K page boundary. So the TW buffer is allocated
1486 	 * to be larger than required. The buffer in the range of
1487 	 * [SETUP_SIZE, EHCI_MAX_QTD_BUF_SIZE) is just for padding
1488 	 * and not to be transferred.
1489 	 */
1490 	if (ctrl_reqp->ctrl_wLength) {
1491 		ctrl_buf_size = EHCI_MAX_QTD_BUF_SIZE +
1492 		    ctrl_reqp->ctrl_wLength;
1493 	} else {
1494 		ctrl_buf_size = SETUP_SIZE;
1495 	}
1496 
1497 	tw = ehci_allocate_tw_resources(ehcip, pp, ctrl_buf_size,
1498 	    usb_flags, qtd_count);
1499 
1500 	return (tw);
1501 }
1502 
1503 /*
1504  * ehci_insert_ctrl_req:
1505  *
1506  * Create a Transfer Descriptor (QTD) and a data buffer for a control endpoint.
1507  */
1508 /* ARGSUSED */
1509 void
ehci_insert_ctrl_req(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph,usb_ctrl_req_t * ctrl_reqp,ehci_trans_wrapper_t * tw,usb_flags_t usb_flags)1510 ehci_insert_ctrl_req(
1511 	ehci_state_t		*ehcip,
1512 	usba_pipe_handle_data_t	*ph,
1513 	usb_ctrl_req_t		*ctrl_reqp,
1514 	ehci_trans_wrapper_t	*tw,
1515 	usb_flags_t		usb_flags)
1516 {
1517 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
1518 	uchar_t			bmRequestType = ctrl_reqp->ctrl_bmRequestType;
1519 	uchar_t			bRequest = ctrl_reqp->ctrl_bRequest;
1520 	uint16_t		wValue = ctrl_reqp->ctrl_wValue;
1521 	uint16_t		wIndex = ctrl_reqp->ctrl_wIndex;
1522 	uint16_t		wLength = ctrl_reqp->ctrl_wLength;
1523 	mblk_t			*data = ctrl_reqp->ctrl_data;
1524 	uint32_t		ctrl = 0;
1525 	uint8_t			setup_packet[8];
1526 
1527 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
1528 	    "ehci_insert_ctrl_req:");
1529 
1530 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
1531 
1532 	/*
1533 	 * Save current control request pointer and timeout values
1534 	 * in transfer wrapper.
1535 	 */
1536 	tw->tw_curr_xfer_reqp = (usb_opaque_t)ctrl_reqp;
1537 	tw->tw_timeout = ctrl_reqp->ctrl_timeout ?
1538 	    ctrl_reqp->ctrl_timeout : EHCI_DEFAULT_XFER_TIMEOUT;
1539 
1540 	/*
1541 	 * Initialize the callback and any callback data for when
1542 	 * the qtd completes.
1543 	 */
1544 	tw->tw_handle_qtd = ehci_handle_ctrl_qtd;
1545 	tw->tw_handle_callback_value = NULL;
1546 
1547 	/*
1548 	 * swap the setup bytes where necessary since we specified
1549 	 * NEVERSWAP
1550 	 */
1551 	setup_packet[0] = bmRequestType;
1552 	setup_packet[1] = bRequest;
1553 	setup_packet[2] = (uint8_t)wValue;
1554 	setup_packet[3] = wValue >> 8;
1555 	setup_packet[4] = (uint8_t)wIndex;
1556 	setup_packet[5] = wIndex >> 8;
1557 	setup_packet[6] = (uint8_t)wLength;
1558 	setup_packet[7] = wLength >> 8;
1559 
1560 	bcopy(setup_packet, tw->tw_buf, SETUP_SIZE);
1561 
1562 	Sync_IO_Buffer_for_device(tw->tw_dmahandle, SETUP_SIZE);
1563 
1564 	ctrl = (EHCI_QTD_CTRL_DATA_TOGGLE_0 | EHCI_QTD_CTRL_SETUP_PID);
1565 
1566 	/*
1567 	 * The QTD's are placed on the QH one at a time.
1568 	 * Once this QTD is placed on the done list, the
1569 	 * data or status phase QTD will be enqueued.
1570 	 */
1571 	(void) ehci_insert_qtd(ehcip, ctrl, 0, SETUP_SIZE,
1572 	    EHCI_CTRL_SETUP_PHASE, pp, tw);
1573 
1574 	USB_DPRINTF_L3(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl,
1575 	    "ehci_insert_ctrl_req: pp 0x%p", (void *)pp);
1576 
1577 	/*
1578 	 * If this control transfer has a data phase, record the
1579 	 * direction. If the data phase is an OUT transaction,
1580 	 * copy the data into the buffer of the transfer wrapper.
1581 	 */
1582 	if (wLength != 0) {
1583 		/* There is a data stage.  Find the direction */
1584 		if (bmRequestType & USB_DEV_REQ_DEV_TO_HOST) {
1585 			tw->tw_direction = EHCI_QTD_CTRL_IN_PID;
1586 		} else {
1587 			tw->tw_direction = EHCI_QTD_CTRL_OUT_PID;
1588 
1589 			/* Copy the data into the message */
1590 			bcopy(data->b_rptr, tw->tw_buf + EHCI_MAX_QTD_BUF_SIZE,
1591 			    wLength);
1592 
1593 			Sync_IO_Buffer_for_device(tw->tw_dmahandle,
1594 			    wLength + EHCI_MAX_QTD_BUF_SIZE);
1595 		}
1596 
1597 		ctrl = (EHCI_QTD_CTRL_DATA_TOGGLE_1 | tw->tw_direction);
1598 
1599 		/*
1600 		 * Create the QTD.  If this is an OUT transaction,
1601 		 * the data is already in the buffer of the TW.
1602 		 * The transfer should start from EHCI_MAX_QTD_BUF_SIZE
1603 		 * which is 4K aligned, though the ctrl phase only
1604 		 * transfers a length of SETUP_SIZE. The padding data
1605 		 * in the TW buffer are discarded.
1606 		 */
1607 		(void) ehci_insert_qtd(ehcip, ctrl, EHCI_MAX_QTD_BUF_SIZE,
1608 		    tw->tw_length - EHCI_MAX_QTD_BUF_SIZE,
1609 		    EHCI_CTRL_DATA_PHASE, pp, tw);
1610 
1611 		/*
1612 		 * The direction of the STATUS QTD depends  on
1613 		 * the direction of the transfer.
1614 		 */
1615 		if (tw->tw_direction == EHCI_QTD_CTRL_IN_PID) {
1616 			ctrl = (EHCI_QTD_CTRL_DATA_TOGGLE_1|
1617 			    EHCI_QTD_CTRL_OUT_PID |
1618 			    EHCI_QTD_CTRL_INTR_ON_COMPLETE);
1619 		} else {
1620 			ctrl = (EHCI_QTD_CTRL_DATA_TOGGLE_1|
1621 			    EHCI_QTD_CTRL_IN_PID |
1622 			    EHCI_QTD_CTRL_INTR_ON_COMPLETE);
1623 		}
1624 	} else {
1625 		/*
1626 		 * There is no data stage,  then initiate
1627 		 * status phase from the host.
1628 		 */
1629 		ctrl = (EHCI_QTD_CTRL_DATA_TOGGLE_1 |
1630 		    EHCI_QTD_CTRL_IN_PID |
1631 		    EHCI_QTD_CTRL_INTR_ON_COMPLETE);
1632 	}
1633 
1634 
1635 	(void) ehci_insert_qtd(ehcip, ctrl, 0, 0,
1636 	    EHCI_CTRL_STATUS_PHASE, pp,  tw);
1637 
1638 	/* Start the timer for this control transfer */
1639 	ehci_start_xfer_timer(ehcip, pp, tw);
1640 }
1641 
1642 
1643 /*
1644  * ehci_allocate_bulk_resources:
1645  *
1646  * Calculates the number of tds necessary for a ctrl transfer, and allocates
1647  * all the resources necessary.
1648  *
1649  * Returns NULL if there is insufficient resources otherwise TW.
1650  */
1651 ehci_trans_wrapper_t *
ehci_allocate_bulk_resources(ehci_state_t * ehcip,ehci_pipe_private_t * pp,usb_bulk_req_t * bulk_reqp,usb_flags_t usb_flags)1652 ehci_allocate_bulk_resources(
1653 	ehci_state_t		*ehcip,
1654 	ehci_pipe_private_t	*pp,
1655 	usb_bulk_req_t		*bulk_reqp,
1656 	usb_flags_t		usb_flags)
1657 {
1658 	size_t			qtd_count = 0;
1659 	ehci_trans_wrapper_t	*tw;
1660 
1661 	/* Check the size of bulk request */
1662 	if (bulk_reqp->bulk_len > EHCI_MAX_BULK_XFER_SIZE) {
1663 
1664 		USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
1665 		    "ehci_allocate_bulk_resources: Bulk request size 0x%x is "
1666 		    "more than 0x%x", bulk_reqp->bulk_len,
1667 		    EHCI_MAX_BULK_XFER_SIZE);
1668 
1669 		return (NULL);
1670 	}
1671 
1672 	/* Get the required bulk packet size */
1673 	qtd_count = bulk_reqp->bulk_len / EHCI_MAX_QTD_XFER_SIZE;
1674 	if (bulk_reqp->bulk_len % EHCI_MAX_QTD_XFER_SIZE ||
1675 	    bulk_reqp->bulk_len == 0) {
1676 		qtd_count += 1;
1677 	}
1678 
1679 	tw = ehci_allocate_tw_resources(ehcip, pp, bulk_reqp->bulk_len,
1680 	    usb_flags, qtd_count);
1681 
1682 	return (tw);
1683 }
1684 
1685 /*
1686  * ehci_insert_bulk_req:
1687  *
1688  * Create a Transfer Descriptor (QTD) and a data buffer for a bulk
1689  * endpoint.
1690  */
1691 /* ARGSUSED */
1692 void
ehci_insert_bulk_req(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph,usb_bulk_req_t * bulk_reqp,ehci_trans_wrapper_t * tw,usb_flags_t flags)1693 ehci_insert_bulk_req(
1694 	ehci_state_t		*ehcip,
1695 	usba_pipe_handle_data_t	*ph,
1696 	usb_bulk_req_t		*bulk_reqp,
1697 	ehci_trans_wrapper_t	*tw,
1698 	usb_flags_t		flags)
1699 {
1700 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
1701 	uint_t			bulk_pkt_size, count;
1702 	size_t			residue = 0, len = 0;
1703 	uint32_t		ctrl = 0;
1704 	int			pipe_dir;
1705 
1706 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
1707 	    "ehci_insert_bulk_req: bulk_reqp = 0x%p flags = 0x%x",
1708 	    (void *)bulk_reqp, flags);
1709 
1710 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
1711 
1712 	/* Get the bulk pipe direction */
1713 	pipe_dir = ph->p_ep.bEndpointAddress & USB_EP_DIR_MASK;
1714 
1715 	/* Get the required bulk packet size */
1716 	bulk_pkt_size = min(bulk_reqp->bulk_len, EHCI_MAX_QTD_XFER_SIZE);
1717 
1718 	if (bulk_pkt_size) {
1719 		residue = tw->tw_length % bulk_pkt_size;
1720 	}
1721 
1722 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
1723 	    "ehci_insert_bulk_req: bulk_pkt_size = %d", bulk_pkt_size);
1724 
1725 	/*
1726 	 * Save current bulk request pointer and timeout values
1727 	 * in transfer wrapper.
1728 	 */
1729 	tw->tw_curr_xfer_reqp = (usb_opaque_t)bulk_reqp;
1730 	tw->tw_timeout = bulk_reqp->bulk_timeout;
1731 
1732 	/*
1733 	 * Initialize the callback and any callback
1734 	 * data required when the qtd completes.
1735 	 */
1736 	tw->tw_handle_qtd = ehci_handle_bulk_qtd;
1737 	tw->tw_handle_callback_value = NULL;
1738 
1739 	tw->tw_direction = (pipe_dir == USB_EP_DIR_OUT) ?
1740 	    EHCI_QTD_CTRL_OUT_PID : EHCI_QTD_CTRL_IN_PID;
1741 
1742 	if (tw->tw_direction == EHCI_QTD_CTRL_OUT_PID) {
1743 
1744 		if (bulk_reqp->bulk_len) {
1745 			ASSERT(bulk_reqp->bulk_data != NULL);
1746 
1747 			bcopy(bulk_reqp->bulk_data->b_rptr, tw->tw_buf,
1748 			    bulk_reqp->bulk_len);
1749 
1750 			Sync_IO_Buffer_for_device(tw->tw_dmahandle,
1751 			    bulk_reqp->bulk_len);
1752 		}
1753 	}
1754 
1755 	ctrl = tw->tw_direction;
1756 
1757 	/* Insert all the bulk QTDs */
1758 	for (count = 0; count < tw->tw_num_qtds; count++) {
1759 
1760 		/* Check for last qtd */
1761 		if (count == (tw->tw_num_qtds - 1)) {
1762 
1763 			ctrl |= EHCI_QTD_CTRL_INTR_ON_COMPLETE;
1764 
1765 			/* Check for inserting residue data */
1766 			if (residue) {
1767 				bulk_pkt_size = (uint_t)residue;
1768 			}
1769 		}
1770 
1771 		/* Insert the QTD onto the endpoint */
1772 		(void) ehci_insert_qtd(ehcip, ctrl, len, bulk_pkt_size,
1773 		    0, pp, tw);
1774 
1775 		len = len + bulk_pkt_size;
1776 	}
1777 
1778 	/* Start the timer for this bulk transfer */
1779 	ehci_start_xfer_timer(ehcip, pp, tw);
1780 }
1781 
1782 
1783 /*
1784  * ehci_start_periodic_pipe_polling:
1785  *
1786  * NOTE: This function is also called from POLLED MODE.
1787  */
1788 int
ehci_start_periodic_pipe_polling(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph,usb_opaque_t periodic_in_reqp,usb_flags_t flags)1789 ehci_start_periodic_pipe_polling(
1790 	ehci_state_t		*ehcip,
1791 	usba_pipe_handle_data_t	*ph,
1792 	usb_opaque_t		periodic_in_reqp,
1793 	usb_flags_t		flags)
1794 {
1795 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
1796 	usb_ep_descr_t		*eptd = &ph->p_ep;
1797 	int			error = USB_SUCCESS;
1798 
1799 	USB_DPRINTF_L4(PRINT_MASK_HCDI, ehcip->ehci_log_hdl,
1800 	    "ehci_start_periodic_pipe_polling: ep%d",
1801 	    ph->p_ep.bEndpointAddress & USB_EP_NUM_MASK);
1802 
1803 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
1804 
1805 	/*
1806 	 * Check and handle start polling on root hub interrupt pipe.
1807 	 */
1808 	if ((ph->p_usba_device->usb_addr == ROOT_HUB_ADDR) &&
1809 	    ((eptd->bmAttributes & USB_EP_ATTR_MASK) ==
1810 	    USB_EP_ATTR_INTR)) {
1811 
1812 		error = ehci_handle_root_hub_pipe_start_intr_polling(ph,
1813 		    (usb_intr_req_t *)periodic_in_reqp, flags);
1814 
1815 		return (error);
1816 	}
1817 
1818 	switch (pp->pp_state) {
1819 	case EHCI_PIPE_STATE_IDLE:
1820 		/* Save the Original client's Periodic IN request */
1821 		pp->pp_client_periodic_in_reqp = periodic_in_reqp;
1822 
1823 		/*
1824 		 * This pipe is uninitialized or if a valid QTD is
1825 		 * not found then insert a QTD on the interrupt IN
1826 		 * endpoint.
1827 		 */
1828 		error = ehci_start_pipe_polling(ehcip, ph, flags);
1829 
1830 		if (error != USB_SUCCESS) {
1831 			USB_DPRINTF_L2(PRINT_MASK_INTR,
1832 			    ehcip->ehci_log_hdl,
1833 			    "ehci_start_periodic_pipe_polling: "
1834 			    "Start polling failed");
1835 
1836 			pp->pp_client_periodic_in_reqp = NULL;
1837 
1838 			return (error);
1839 		}
1840 
1841 		USB_DPRINTF_L3(PRINT_MASK_INTR, ehcip->ehci_log_hdl,
1842 		    "ehci_start_periodic_pipe_polling: PP = 0x%p", (void *)pp);
1843 
1844 #ifdef DEBUG
1845 		switch (eptd->bmAttributes & USB_EP_ATTR_MASK) {
1846 		case USB_EP_ATTR_INTR:
1847 			ASSERT((pp->pp_tw_head != NULL) &&
1848 			    (pp->pp_tw_tail != NULL));
1849 			break;
1850 		case USB_EP_ATTR_ISOCH:
1851 			ASSERT((pp->pp_itw_head != NULL) &&
1852 			    (pp->pp_itw_tail != NULL));
1853 			break;
1854 		}
1855 #endif
1856 
1857 		break;
1858 	case EHCI_PIPE_STATE_ACTIVE:
1859 		USB_DPRINTF_L2(PRINT_MASK_INTR,
1860 		    ehcip->ehci_log_hdl,
1861 		    "ehci_start_periodic_pipe_polling: "
1862 		    "Polling is already in progress");
1863 
1864 		error = USB_FAILURE;
1865 		break;
1866 	case EHCI_PIPE_STATE_ERROR:
1867 		USB_DPRINTF_L2(PRINT_MASK_INTR,
1868 		    ehcip->ehci_log_hdl,
1869 		    "ehci_start_periodic_pipe_polling: "
1870 		    "Pipe is halted and perform reset"
1871 		    "before restart polling");
1872 
1873 		error = USB_FAILURE;
1874 		break;
1875 	default:
1876 		USB_DPRINTF_L2(PRINT_MASK_INTR,
1877 		    ehcip->ehci_log_hdl,
1878 		    "ehci_start_periodic_pipe_polling: "
1879 		    "Undefined state");
1880 
1881 		error = USB_FAILURE;
1882 		break;
1883 	}
1884 
1885 	return (error);
1886 }
1887 
1888 
1889 /*
1890  * ehci_start_pipe_polling:
1891  *
1892  * Insert the number of periodic requests corresponding to polling
1893  * interval as calculated during pipe open.
1894  */
1895 static int
ehci_start_pipe_polling(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph,usb_flags_t flags)1896 ehci_start_pipe_polling(
1897 	ehci_state_t		*ehcip,
1898 	usba_pipe_handle_data_t	*ph,
1899 	usb_flags_t		flags)
1900 {
1901 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
1902 	usb_ep_descr_t		*eptd = &ph->p_ep;
1903 	int			error = USB_FAILURE;
1904 
1905 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
1906 	    "ehci_start_pipe_polling:");
1907 
1908 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
1909 
1910 	/*
1911 	 * For the start polling, pp_max_periodic_req_cnt will be zero
1912 	 * and for the restart polling request, it will be non zero.
1913 	 *
1914 	 * In case of start polling request, find out number of requests
1915 	 * required for the Interrupt IN endpoints corresponding to the
1916 	 * endpoint polling interval. For Isochronous IN endpoints, it is
1917 	 * always fixed since its polling interval will be one ms.
1918 	 */
1919 	if (pp->pp_max_periodic_req_cnt == 0) {
1920 
1921 		ehci_set_periodic_pipe_polling(ehcip, ph);
1922 	}
1923 
1924 	ASSERT(pp->pp_max_periodic_req_cnt != 0);
1925 
1926 	switch (eptd->bmAttributes & USB_EP_ATTR_MASK) {
1927 	case USB_EP_ATTR_INTR:
1928 		error = ehci_start_intr_polling(ehcip, ph, flags);
1929 		break;
1930 	case USB_EP_ATTR_ISOCH:
1931 		error = ehci_start_isoc_polling(ehcip, ph, flags);
1932 		break;
1933 	}
1934 
1935 	return (error);
1936 }
1937 
1938 static int
ehci_start_intr_polling(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph,usb_flags_t flags)1939 ehci_start_intr_polling(
1940 	ehci_state_t		*ehcip,
1941 	usba_pipe_handle_data_t	*ph,
1942 	usb_flags_t		flags)
1943 {
1944 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
1945 	ehci_trans_wrapper_t	*tw_list, *tw;
1946 	int			i, total_tws;
1947 	int			error = USB_SUCCESS;
1948 
1949 	/* Allocate all the necessary resources for the IN transfer */
1950 	tw_list = NULL;
1951 	total_tws = pp->pp_max_periodic_req_cnt - pp->pp_cur_periodic_req_cnt;
1952 	for (i = 0; i < total_tws; i += 1) {
1953 		tw = ehci_allocate_intr_resources(ehcip, ph, NULL, flags);
1954 		if (tw == NULL) {
1955 			error = USB_NO_RESOURCES;
1956 			/* There are not enough resources, deallocate the TWs */
1957 			tw = tw_list;
1958 			while (tw != NULL) {
1959 				tw_list = tw->tw_next;
1960 				ehci_deallocate_intr_in_resource(
1961 				    ehcip, pp, tw);
1962 				ehci_deallocate_tw(ehcip, pp, tw);
1963 				tw = tw_list;
1964 			}
1965 
1966 			return (error);
1967 		} else {
1968 			if (tw_list == NULL) {
1969 				tw_list = tw;
1970 			}
1971 		}
1972 	}
1973 
1974 	while (pp->pp_cur_periodic_req_cnt < pp->pp_max_periodic_req_cnt) {
1975 
1976 		USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
1977 		    "ehci_start_pipe_polling: max = %d curr = %d tw = %p:",
1978 		    pp->pp_max_periodic_req_cnt, pp->pp_cur_periodic_req_cnt,
1979 		    (void *)tw_list);
1980 
1981 		tw = tw_list;
1982 		tw_list = tw->tw_next;
1983 
1984 		ehci_insert_intr_req(ehcip, pp, tw, flags);
1985 
1986 		pp->pp_cur_periodic_req_cnt++;
1987 	}
1988 
1989 	return (error);
1990 }
1991 
1992 
1993 /*
1994  * ehci_set_periodic_pipe_polling:
1995  *
1996  * Calculate the number of periodic requests needed corresponding to the
1997  * interrupt IN endpoints polling interval. Table below gives the number
1998  * of periodic requests needed for the interrupt IN endpoints  according
1999  * to endpoint polling interval.
2000  *
2001  * Polling interval		Number of periodic requests
2002  *
2003  * 1ms				4
2004  * 2ms				2
2005  * 4ms to 32ms			1
2006  */
2007 static void
ehci_set_periodic_pipe_polling(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph)2008 ehci_set_periodic_pipe_polling(
2009 	ehci_state_t		*ehcip,
2010 	usba_pipe_handle_data_t	*ph)
2011 {
2012 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
2013 	usb_ep_descr_t		*endpoint = &ph->p_ep;
2014 	uchar_t			ep_attr = endpoint->bmAttributes;
2015 	uint_t			interval;
2016 
2017 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
2018 	    "ehci_set_periodic_pipe_polling:");
2019 
2020 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
2021 
2022 	pp->pp_cur_periodic_req_cnt = 0;
2023 
2024 	/*
2025 	 * Check usb flag whether USB_FLAGS_ONE_TIME_POLL flag is
2026 	 * set and if so, set pp->pp_max_periodic_req_cnt to one.
2027 	 */
2028 	if (((ep_attr & USB_EP_ATTR_MASK) == USB_EP_ATTR_INTR) &&
2029 	    (pp->pp_client_periodic_in_reqp)) {
2030 		usb_intr_req_t *intr_reqp = (usb_intr_req_t *)
2031 		    pp->pp_client_periodic_in_reqp;
2032 
2033 		if (intr_reqp->intr_attributes &
2034 		    USB_ATTRS_ONE_XFER) {
2035 
2036 			pp->pp_max_periodic_req_cnt = EHCI_INTR_XMS_REQS;
2037 
2038 			return;
2039 		}
2040 	}
2041 
2042 	mutex_enter(&ph->p_usba_device->usb_mutex);
2043 
2044 	/*
2045 	 * The ehci_adjust_polling_interval function will not fail
2046 	 * at this instance since bandwidth allocation is already
2047 	 * done. Here we are getting only the periodic interval.
2048 	 */
2049 	interval = ehci_adjust_polling_interval(ehcip, endpoint,
2050 	    ph->p_usba_device->usb_port_status);
2051 
2052 	mutex_exit(&ph->p_usba_device->usb_mutex);
2053 
2054 	switch (interval) {
2055 	case EHCI_INTR_1MS_POLL:
2056 		pp->pp_max_periodic_req_cnt = EHCI_INTR_1MS_REQS;
2057 		break;
2058 	case EHCI_INTR_2MS_POLL:
2059 		pp->pp_max_periodic_req_cnt = EHCI_INTR_2MS_REQS;
2060 		break;
2061 	default:
2062 		pp->pp_max_periodic_req_cnt = EHCI_INTR_XMS_REQS;
2063 		break;
2064 	}
2065 
2066 	USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
2067 	    "ehci_set_periodic_pipe_polling: Max periodic requests = %d",
2068 	    pp->pp_max_periodic_req_cnt);
2069 }
2070 
2071 /*
2072  * ehci_allocate_intr_resources:
2073  *
2074  * Calculates the number of tds necessary for a intr transfer, and allocates
2075  * all the necessary resources.
2076  *
2077  * Returns NULL if there is insufficient resources otherwise TW.
2078  */
2079 ehci_trans_wrapper_t *
ehci_allocate_intr_resources(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph,usb_intr_req_t * intr_reqp,usb_flags_t flags)2080 ehci_allocate_intr_resources(
2081 	ehci_state_t		*ehcip,
2082 	usba_pipe_handle_data_t	*ph,
2083 	usb_intr_req_t		*intr_reqp,
2084 	usb_flags_t		flags)
2085 {
2086 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
2087 	int			pipe_dir;
2088 	size_t			qtd_count = 1;
2089 	size_t			tw_length;
2090 	ehci_trans_wrapper_t	*tw;
2091 
2092 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
2093 	    "ehci_allocate_intr_resources:");
2094 
2095 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
2096 
2097 	pipe_dir = ph->p_ep.bEndpointAddress & USB_EP_DIR_MASK;
2098 
2099 	/* Get the length of interrupt transfer & alloc data */
2100 	if (intr_reqp) {
2101 		tw_length = intr_reqp->intr_len;
2102 	} else {
2103 		ASSERT(pipe_dir == USB_EP_DIR_IN);
2104 		tw_length = (pp->pp_client_periodic_in_reqp) ?
2105 		    (((usb_intr_req_t *)pp->
2106 		    pp_client_periodic_in_reqp)->intr_len) :
2107 		    ph->p_ep.wMaxPacketSize;
2108 	}
2109 
2110 	/* Check the size of interrupt request */
2111 	if (tw_length > EHCI_MAX_QTD_XFER_SIZE) {
2112 
2113 		USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
2114 		    "ehci_allocate_intr_resources: Intr request size 0x%lx is "
2115 		    "more than 0x%x", tw_length, EHCI_MAX_QTD_XFER_SIZE);
2116 
2117 		return (NULL);
2118 	}
2119 
2120 	if ((tw = ehci_allocate_tw_resources(ehcip, pp, tw_length, flags,
2121 	    qtd_count)) == NULL) {
2122 
2123 		return (NULL);
2124 	}
2125 
2126 	if (pipe_dir == USB_EP_DIR_IN) {
2127 		if (ehci_allocate_intr_in_resource(ehcip, pp, tw, flags) !=
2128 		    USB_SUCCESS) {
2129 			ehci_deallocate_tw(ehcip, pp, tw);
2130 		}
2131 		tw->tw_direction = EHCI_QTD_CTRL_IN_PID;
2132 	} else {
2133 		if (tw_length) {
2134 			ASSERT(intr_reqp->intr_data != NULL);
2135 
2136 			/* Copy the data into the buffer */
2137 			bcopy(intr_reqp->intr_data->b_rptr, tw->tw_buf,
2138 			    intr_reqp->intr_len);
2139 
2140 			Sync_IO_Buffer_for_device(tw->tw_dmahandle,
2141 			    intr_reqp->intr_len);
2142 		}
2143 
2144 		tw->tw_curr_xfer_reqp = (usb_opaque_t)intr_reqp;
2145 		tw->tw_direction = EHCI_QTD_CTRL_OUT_PID;
2146 	}
2147 
2148 	if (intr_reqp) {
2149 		tw->tw_timeout = intr_reqp->intr_timeout;
2150 	}
2151 
2152 	/*
2153 	 * Initialize the callback and any callback
2154 	 * data required when the qtd completes.
2155 	 */
2156 	tw->tw_handle_qtd = ehci_handle_intr_qtd;
2157 	tw->tw_handle_callback_value = NULL;
2158 
2159 	return (tw);
2160 }
2161 
2162 
2163 /*
2164  * ehci_insert_intr_req:
2165  *
2166  * Insert an Interrupt request into the Host Controller's periodic list.
2167  */
2168 /* ARGSUSED */
2169 void
ehci_insert_intr_req(ehci_state_t * ehcip,ehci_pipe_private_t * pp,ehci_trans_wrapper_t * tw,usb_flags_t flags)2170 ehci_insert_intr_req(
2171 	ehci_state_t		*ehcip,
2172 	ehci_pipe_private_t	*pp,
2173 	ehci_trans_wrapper_t	*tw,
2174 	usb_flags_t		flags)
2175 {
2176 	uint_t			ctrl = 0;
2177 
2178 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
2179 
2180 	ASSERT(tw->tw_curr_xfer_reqp != NULL);
2181 
2182 	ctrl = (tw->tw_direction | EHCI_QTD_CTRL_INTR_ON_COMPLETE);
2183 
2184 	/* Insert another interrupt QTD */
2185 	(void) ehci_insert_qtd(ehcip, ctrl, 0, tw->tw_length, 0, pp, tw);
2186 
2187 	/* Start the timer for this Interrupt transfer */
2188 	ehci_start_xfer_timer(ehcip, pp, tw);
2189 }
2190 
2191 
2192 /*
2193  * ehci_stop_periodic_pipe_polling:
2194  */
2195 /* ARGSUSED */
2196 int
ehci_stop_periodic_pipe_polling(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph,usb_flags_t flags)2197 ehci_stop_periodic_pipe_polling(
2198 	ehci_state_t		*ehcip,
2199 	usba_pipe_handle_data_t	*ph,
2200 	usb_flags_t		flags)
2201 {
2202 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
2203 	usb_ep_descr_t		*eptd = &ph->p_ep;
2204 
2205 	USB_DPRINTF_L4(PRINT_MASK_HCDI, ehcip->ehci_log_hdl,
2206 	    "ehci_stop_periodic_pipe_polling: Flags = 0x%x", flags);
2207 
2208 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
2209 
2210 	/*
2211 	 * Check and handle stop polling on root hub interrupt pipe.
2212 	 */
2213 	if ((ph->p_usba_device->usb_addr == ROOT_HUB_ADDR) &&
2214 	    ((eptd->bmAttributes & USB_EP_ATTR_MASK) ==
2215 	    USB_EP_ATTR_INTR)) {
2216 
2217 		ehci_handle_root_hub_pipe_stop_intr_polling(ph, flags);
2218 
2219 		return (USB_SUCCESS);
2220 	}
2221 
2222 	if (pp->pp_state != EHCI_PIPE_STATE_ACTIVE) {
2223 
2224 		USB_DPRINTF_L2(PRINT_MASK_HCDI, ehcip->ehci_log_hdl,
2225 		    "ehci_stop_periodic_pipe_polling: "
2226 		    "Polling already stopped");
2227 
2228 		return (USB_SUCCESS);
2229 	}
2230 
2231 	/* Set pipe state to pipe stop polling */
2232 	pp->pp_state = EHCI_PIPE_STATE_STOP_POLLING;
2233 
2234 	ehci_pipe_cleanup(ehcip, ph);
2235 
2236 	return (USB_SUCCESS);
2237 }
2238 
2239 
2240 /*
2241  * ehci_insert_qtd:
2242  *
2243  * Insert a Transfer Descriptor (QTD) on an Endpoint Descriptor (QH).
2244  * Always returns USB_SUCCESS for now.	Once Isoch has been implemented,
2245  * it may return USB_FAILURE.
2246  */
2247 int
ehci_insert_qtd(ehci_state_t * ehcip,uint32_t qtd_ctrl,size_t qtd_dma_offs,size_t qtd_length,uint32_t qtd_ctrl_phase,ehci_pipe_private_t * pp,ehci_trans_wrapper_t * tw)2248 ehci_insert_qtd(
2249 	ehci_state_t		*ehcip,
2250 	uint32_t		qtd_ctrl,
2251 	size_t			qtd_dma_offs,
2252 	size_t			qtd_length,
2253 	uint32_t		qtd_ctrl_phase,
2254 	ehci_pipe_private_t	*pp,
2255 	ehci_trans_wrapper_t	*tw)
2256 {
2257 	ehci_qtd_t		*curr_dummy_qtd, *next_dummy_qtd;
2258 	ehci_qtd_t		*new_dummy_qtd;
2259 	ehci_qh_t		*qh = pp->pp_qh;
2260 	int			error = USB_SUCCESS;
2261 
2262 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
2263 
2264 	/* Allocate new dummy QTD */
2265 	new_dummy_qtd = tw->tw_qtd_free_list;
2266 
2267 	ASSERT(new_dummy_qtd != NULL);
2268 	tw->tw_qtd_free_list = ehci_qtd_iommu_to_cpu(ehcip,
2269 	    Get_QTD(new_dummy_qtd->qtd_tw_next_qtd));
2270 	Set_QTD(new_dummy_qtd->qtd_tw_next_qtd, 0);
2271 
2272 	/* Get the current and next dummy QTDs */
2273 	curr_dummy_qtd = ehci_qtd_iommu_to_cpu(ehcip,
2274 	    Get_QH(qh->qh_dummy_qtd));
2275 	next_dummy_qtd = ehci_qtd_iommu_to_cpu(ehcip,
2276 	    Get_QTD(curr_dummy_qtd->qtd_next_qtd));
2277 
2278 	/* Update QH's dummy qtd field */
2279 	Set_QH(qh->qh_dummy_qtd, ehci_qtd_cpu_to_iommu(ehcip, next_dummy_qtd));
2280 
2281 	/* Update next dummy's next qtd pointer */
2282 	Set_QTD(next_dummy_qtd->qtd_next_qtd,
2283 	    ehci_qtd_cpu_to_iommu(ehcip, new_dummy_qtd));
2284 
2285 	/*
2286 	 * Fill in the current dummy qtd and
2287 	 * add the new dummy to the end.
2288 	 */
2289 	ehci_fill_in_qtd(ehcip, curr_dummy_qtd, qtd_ctrl,
2290 	    qtd_dma_offs, qtd_length, qtd_ctrl_phase, pp, tw);
2291 
2292 	/* Insert this qtd onto the tw */
2293 	ehci_insert_qtd_on_tw(ehcip, tw, curr_dummy_qtd);
2294 
2295 	/*
2296 	 * Insert this qtd onto active qtd list.
2297 	 * Don't insert polled mode qtd here.
2298 	 */
2299 	if (pp->pp_flag != EHCI_POLLED_MODE_FLAG) {
2300 		/* Insert this qtd onto active qtd list */
2301 		ehci_insert_qtd_into_active_qtd_list(ehcip, curr_dummy_qtd);
2302 	}
2303 
2304 	/* Print qh and qtd */
2305 	ehci_print_qh(ehcip, qh);
2306 	ehci_print_qtd(ehcip, curr_dummy_qtd);
2307 
2308 	return (error);
2309 }
2310 
2311 
2312 /*
2313  * ehci_allocate_qtd_from_pool:
2314  *
2315  * Allocate a Transfer Descriptor (QTD) from the QTD buffer pool.
2316  */
2317 static ehci_qtd_t *
ehci_allocate_qtd_from_pool(ehci_state_t * ehcip)2318 ehci_allocate_qtd_from_pool(ehci_state_t	*ehcip)
2319 {
2320 	int		i, ctrl;
2321 	ehci_qtd_t	*qtd;
2322 
2323 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
2324 
2325 	/*
2326 	 * Search for a blank Transfer Descriptor (QTD)
2327 	 * in the QTD buffer pool.
2328 	 */
2329 	for (i = 0; i < ehci_qtd_pool_size; i ++) {
2330 		ctrl = Get_QTD(ehcip->ehci_qtd_pool_addr[i].qtd_state);
2331 		if (ctrl == EHCI_QTD_FREE) {
2332 			break;
2333 		}
2334 	}
2335 
2336 	if (i >= ehci_qtd_pool_size) {
2337 		USB_DPRINTF_L2(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl,
2338 		    "ehci_allocate_qtd_from_pool: QTD exhausted");
2339 
2340 		return (NULL);
2341 	}
2342 
2343 	USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl,
2344 	    "ehci_allocate_qtd_from_pool: Allocated %d", i);
2345 
2346 	/* Create a new dummy for the end of the QTD list */
2347 	qtd = &ehcip->ehci_qtd_pool_addr[i];
2348 
2349 	USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
2350 	    "ehci_allocate_qtd_from_pool: qtd 0x%p", (void *)qtd);
2351 
2352 	/* Mark the newly allocated QTD as a dummy */
2353 	Set_QTD(qtd->qtd_state, EHCI_QTD_DUMMY);
2354 
2355 	/* Mark the status of this new QTD to halted state */
2356 	Set_QTD(qtd->qtd_ctrl, EHCI_QTD_CTRL_HALTED_XACT);
2357 
2358 	/* Disable dummy QTD's next and alternate next pointers */
2359 	Set_QTD(qtd->qtd_next_qtd, EHCI_QTD_NEXT_QTD_PTR_VALID);
2360 	Set_QTD(qtd->qtd_alt_next_qtd, EHCI_QTD_ALT_NEXT_QTD_PTR_VALID);
2361 
2362 	return (qtd);
2363 }
2364 
2365 
2366 /*
2367  * ehci_fill_in_qtd:
2368  *
2369  * Fill in the fields of a Transfer Descriptor (QTD).
2370  * The "Buffer Pointer" fields of a QTD are retrieved from the TW
2371  * it is associated with.
2372  *
2373  * Note:
2374  * qtd_dma_offs - the starting offset into the TW buffer, where the QTD
2375  *		  should transfer from. It should be 4K aligned. And when
2376  *		  a TW has more than one QTDs, the QTDs must be filled in
2377  *		  increasing order.
2378  * qtd_length - the total bytes to transfer.
2379  */
2380 /*ARGSUSED*/
2381 static void
ehci_fill_in_qtd(ehci_state_t * ehcip,ehci_qtd_t * qtd,uint32_t qtd_ctrl,size_t qtd_dma_offs,size_t qtd_length,uint32_t qtd_ctrl_phase,ehci_pipe_private_t * pp,ehci_trans_wrapper_t * tw)2382 ehci_fill_in_qtd(
2383 	ehci_state_t		*ehcip,
2384 	ehci_qtd_t		*qtd,
2385 	uint32_t		qtd_ctrl,
2386 	size_t			qtd_dma_offs,
2387 	size_t			qtd_length,
2388 	uint32_t		qtd_ctrl_phase,
2389 	ehci_pipe_private_t	*pp,
2390 	ehci_trans_wrapper_t	*tw)
2391 {
2392 	uint32_t		buf_addr;
2393 	size_t			buf_len = qtd_length;
2394 	uint32_t		ctrl = qtd_ctrl;
2395 	uint_t			i = 0;
2396 	int			rem_len;
2397 
2398 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
2399 	    "ehci_fill_in_qtd: qtd 0x%p ctrl 0x%x bufoffs 0x%lx "
2400 	    "len 0x%lx", (void *)qtd, qtd_ctrl, qtd_dma_offs, qtd_length);
2401 
2402 	/* Assert that the qtd to be filled in is a dummy */
2403 	ASSERT(Get_QTD(qtd->qtd_state) == EHCI_QTD_DUMMY);
2404 
2405 	/* Change QTD's state Active */
2406 	Set_QTD(qtd->qtd_state, EHCI_QTD_ACTIVE);
2407 
2408 	/* Set the total length data transfer */
2409 	ctrl |= (((qtd_length << EHCI_QTD_CTRL_BYTES_TO_XFER_SHIFT)
2410 	    & EHCI_QTD_CTRL_BYTES_TO_XFER) | EHCI_QTD_CTRL_MAX_ERR_COUNTS);
2411 
2412 	/*
2413 	 * QTDs must be filled in increasing DMA offset order.
2414 	 * tw_dma_offs is initialized to be 0 at TW creation and
2415 	 * is only increased in this function.
2416 	 */
2417 	ASSERT(buf_len == 0 || qtd_dma_offs >= tw->tw_dma_offs);
2418 
2419 	/*
2420 	 * Save the starting dma buffer offset used and
2421 	 * length of data that will be transfered in
2422 	 * the current QTD.
2423 	 */
2424 	Set_QTD(qtd->qtd_xfer_offs, qtd_dma_offs);
2425 	Set_QTD(qtd->qtd_xfer_len, buf_len);
2426 
2427 	while (buf_len) {
2428 		/*
2429 		 * Advance to the next DMA cookie until finding the cookie
2430 		 * that qtd_dma_offs falls in.
2431 		 * It is very likely this loop will never repeat more than
2432 		 * once. It is here just to accommodate the case qtd_dma_offs
2433 		 * is increased by multiple cookies during two consecutive
2434 		 * calls into this function. In that case, the interim DMA
2435 		 * buffer is allowed to be skipped.
2436 		 */
2437 		while ((tw->tw_dma_offs + tw->tw_cookie.dmac_size) <=
2438 		    qtd_dma_offs) {
2439 			/*
2440 			 * tw_dma_offs always points to the starting offset
2441 			 * of a cookie
2442 			 */
2443 			tw->tw_dma_offs += tw->tw_cookie.dmac_size;
2444 			ddi_dma_nextcookie(tw->tw_dmahandle, &tw->tw_cookie);
2445 			tw->tw_cookie_idx++;
2446 			ASSERT(tw->tw_cookie_idx < tw->tw_ncookies);
2447 		}
2448 
2449 		/*
2450 		 * Counting the remained buffer length to be filled in
2451 		 * the QTD for current DMA cookie
2452 		 */
2453 		rem_len = (tw->tw_dma_offs + tw->tw_cookie.dmac_size) -
2454 		    qtd_dma_offs;
2455 
2456 		/* Update the beginning of the buffer */
2457 		buf_addr = (qtd_dma_offs - tw->tw_dma_offs) +
2458 		    tw->tw_cookie.dmac_address;
2459 		ASSERT((buf_addr % EHCI_4K_ALIGN) == 0);
2460 		Set_QTD(qtd->qtd_buf[i], buf_addr);
2461 
2462 		USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
2463 		    "ehci_fill_in_qtd: dmac_addr 0x%x dmac_size "
2464 		    "0x%lx idx %d", buf_addr, tw->tw_cookie.dmac_size,
2465 		    tw->tw_cookie_idx);
2466 
2467 		if (buf_len <= EHCI_MAX_QTD_BUF_SIZE) {
2468 			ASSERT(buf_len <= rem_len);
2469 			break;
2470 		} else {
2471 			ASSERT(rem_len >= EHCI_MAX_QTD_BUF_SIZE);
2472 			buf_len -= EHCI_MAX_QTD_BUF_SIZE;
2473 			qtd_dma_offs += EHCI_MAX_QTD_BUF_SIZE;
2474 		}
2475 
2476 		i++;
2477 	}
2478 
2479 	/*
2480 	 * Setup the alternate next qTD pointer if appropriate.  The alternate
2481 	 * qtd is currently pointing to a QTD that is not yet linked, but will
2482 	 * be in the very near future.	If a short_xfer occurs in this
2483 	 * situation , the HC will automatically skip this QH.	Eventually
2484 	 * everything will be placed and the alternate_qtd will be valid QTD.
2485 	 * For more information on alternate qtds look at section 3.5.2 in the
2486 	 * EHCI spec.
2487 	 */
2488 	if (tw->tw_alt_qtd != NULL) {
2489 		Set_QTD(qtd->qtd_alt_next_qtd,
2490 		    (ehci_qtd_cpu_to_iommu(ehcip, tw->tw_alt_qtd) &
2491 		    EHCI_QTD_ALT_NEXT_QTD_PTR));
2492 	}
2493 
2494 	/*
2495 	 * For control, bulk and interrupt QTD, now
2496 	 * enable current QTD by setting active bit.
2497 	 */
2498 	Set_QTD(qtd->qtd_ctrl, (ctrl | EHCI_QTD_CTRL_ACTIVE_XACT));
2499 
2500 	/*
2501 	 * For Control Xfer, qtd_ctrl_phase is a valid filed.
2502 	 */
2503 	if (qtd_ctrl_phase) {
2504 		Set_QTD(qtd->qtd_ctrl_phase, qtd_ctrl_phase);
2505 	}
2506 
2507 	/* Set the transfer wrapper */
2508 	ASSERT(tw != NULL);
2509 	ASSERT(tw->tw_id != 0);
2510 
2511 	Set_QTD(qtd->qtd_trans_wrapper, (uint32_t)tw->tw_id);
2512 }
2513 
2514 
2515 /*
2516  * ehci_insert_qtd_on_tw:
2517  *
2518  * The transfer wrapper keeps a list of all Transfer Descriptors (QTD) that
2519  * are allocated for this transfer. Insert a QTD  onto this list. The  list
2520  * of QTD's does not include the dummy QTD that is at the end of the list of
2521  * QTD's for the endpoint.
2522  */
2523 static void
ehci_insert_qtd_on_tw(ehci_state_t * ehcip,ehci_trans_wrapper_t * tw,ehci_qtd_t * qtd)2524 ehci_insert_qtd_on_tw(
2525 	ehci_state_t		*ehcip,
2526 	ehci_trans_wrapper_t	*tw,
2527 	ehci_qtd_t		*qtd)
2528 {
2529 	/*
2530 	 * Set the next pointer to NULL because
2531 	 * this is the last QTD on list.
2532 	 */
2533 	Set_QTD(qtd->qtd_tw_next_qtd, 0);
2534 
2535 	if (tw->tw_qtd_head == NULL) {
2536 		ASSERT(tw->tw_qtd_tail == NULL);
2537 		tw->tw_qtd_head = qtd;
2538 		tw->tw_qtd_tail = qtd;
2539 	} else {
2540 		ehci_qtd_t *dummy = (ehci_qtd_t *)tw->tw_qtd_tail;
2541 
2542 		ASSERT(dummy != NULL);
2543 		ASSERT(dummy != qtd);
2544 		ASSERT(Get_QTD(qtd->qtd_state) != EHCI_QTD_DUMMY);
2545 
2546 		/* Add the qtd to the end of the list */
2547 		Set_QTD(dummy->qtd_tw_next_qtd,
2548 		    ehci_qtd_cpu_to_iommu(ehcip, qtd));
2549 
2550 		tw->tw_qtd_tail = qtd;
2551 
2552 		ASSERT(Get_QTD(qtd->qtd_tw_next_qtd) == 0);
2553 	}
2554 }
2555 
2556 
2557 /*
2558  * ehci_insert_qtd_into_active_qtd_list:
2559  *
2560  * Insert current QTD into active QTD list.
2561  */
2562 static void
ehci_insert_qtd_into_active_qtd_list(ehci_state_t * ehcip,ehci_qtd_t * qtd)2563 ehci_insert_qtd_into_active_qtd_list(
2564 	ehci_state_t		*ehcip,
2565 	ehci_qtd_t		*qtd)
2566 {
2567 	ehci_qtd_t		*curr_qtd, *next_qtd;
2568 
2569 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
2570 
2571 	curr_qtd = ehcip->ehci_active_qtd_list;
2572 
2573 	/* Insert this QTD into QTD Active List */
2574 	if (curr_qtd) {
2575 		next_qtd = ehci_qtd_iommu_to_cpu(ehcip,
2576 		    Get_QTD(curr_qtd->qtd_active_qtd_next));
2577 
2578 		while (next_qtd) {
2579 			curr_qtd = next_qtd;
2580 			next_qtd = ehci_qtd_iommu_to_cpu(ehcip,
2581 			    Get_QTD(curr_qtd->qtd_active_qtd_next));
2582 		}
2583 
2584 		Set_QTD(qtd->qtd_active_qtd_prev,
2585 		    ehci_qtd_cpu_to_iommu(ehcip, curr_qtd));
2586 
2587 		Set_QTD(curr_qtd->qtd_active_qtd_next,
2588 		    ehci_qtd_cpu_to_iommu(ehcip, qtd));
2589 	} else {
2590 		ehcip->ehci_active_qtd_list = qtd;
2591 		Set_QTD(qtd->qtd_active_qtd_next, 0);
2592 		Set_QTD(qtd->qtd_active_qtd_prev, 0);
2593 	}
2594 }
2595 
2596 
2597 /*
2598  * ehci_remove_qtd_from_active_qtd_list:
2599  *
2600  * Remove current QTD from the active QTD list.
2601  *
2602  * NOTE: This function is also called from POLLED MODE.
2603  */
2604 void
ehci_remove_qtd_from_active_qtd_list(ehci_state_t * ehcip,ehci_qtd_t * qtd)2605 ehci_remove_qtd_from_active_qtd_list(
2606 	ehci_state_t		*ehcip,
2607 	ehci_qtd_t		*qtd)
2608 {
2609 	ehci_qtd_t		*curr_qtd, *prev_qtd, *next_qtd;
2610 
2611 	ASSERT(qtd != NULL);
2612 
2613 	curr_qtd = ehcip->ehci_active_qtd_list;
2614 
2615 	while ((curr_qtd) && (curr_qtd != qtd)) {
2616 		curr_qtd = ehci_qtd_iommu_to_cpu(ehcip,
2617 		    Get_QTD(curr_qtd->qtd_active_qtd_next));
2618 	}
2619 
2620 	if ((curr_qtd) && (curr_qtd == qtd)) {
2621 		prev_qtd = ehci_qtd_iommu_to_cpu(ehcip,
2622 		    Get_QTD(curr_qtd->qtd_active_qtd_prev));
2623 		next_qtd = ehci_qtd_iommu_to_cpu(ehcip,
2624 		    Get_QTD(curr_qtd->qtd_active_qtd_next));
2625 
2626 		if (prev_qtd) {
2627 			Set_QTD(prev_qtd->qtd_active_qtd_next,
2628 			    Get_QTD(curr_qtd->qtd_active_qtd_next));
2629 		} else {
2630 			ehcip->ehci_active_qtd_list = next_qtd;
2631 		}
2632 
2633 		if (next_qtd) {
2634 			Set_QTD(next_qtd->qtd_active_qtd_prev,
2635 			    Get_QTD(curr_qtd->qtd_active_qtd_prev));
2636 		}
2637 	} else {
2638 		USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
2639 		    "ehci_remove_qtd_from_active_qtd_list: "
2640 		    "Unable to find QTD in active_qtd_list");
2641 	}
2642 }
2643 
2644 
2645 /*
2646  * ehci_traverse_qtds:
2647  *
2648  * Traverse the list of QTDs for given pipe using transfer wrapper.  Since
2649  * the endpoint is marked as Halted, the Host Controller (HC) is no longer
2650  * accessing these QTDs. Remove all the QTDs that are attached to endpoint.
2651  */
2652 static void
ehci_traverse_qtds(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph)2653 ehci_traverse_qtds(
2654 	ehci_state_t		*ehcip,
2655 	usba_pipe_handle_data_t	*ph)
2656 {
2657 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
2658 	ehci_trans_wrapper_t	*next_tw;
2659 	ehci_qtd_t		*qtd;
2660 	ehci_qtd_t		*next_qtd;
2661 
2662 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
2663 
2664 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
2665 	    "ehci_traverse_qtds:");
2666 
2667 	/* Process the transfer wrappers for this pipe */
2668 	next_tw = pp->pp_tw_head;
2669 
2670 	while (next_tw) {
2671 		/* Stop the the transfer timer */
2672 		ehci_stop_xfer_timer(ehcip, next_tw, EHCI_REMOVE_XFER_ALWAYS);
2673 
2674 		qtd = (ehci_qtd_t *)next_tw->tw_qtd_head;
2675 
2676 		/* Walk through each QTD for this transfer wrapper */
2677 		while (qtd) {
2678 			/* Remove this QTD from active QTD list */
2679 			ehci_remove_qtd_from_active_qtd_list(ehcip, qtd);
2680 
2681 			next_qtd = ehci_qtd_iommu_to_cpu(ehcip,
2682 			    Get_QTD(qtd->qtd_tw_next_qtd));
2683 
2684 			/* Deallocate this QTD */
2685 			ehci_deallocate_qtd(ehcip, qtd);
2686 
2687 			qtd = next_qtd;
2688 		}
2689 
2690 		next_tw = next_tw->tw_next;
2691 	}
2692 
2693 	/* Clear current qtd pointer */
2694 	Set_QH(pp->pp_qh->qh_curr_qtd, (uint32_t)0x00000000);
2695 
2696 	/* Update the next qtd pointer in the QH */
2697 	Set_QH(pp->pp_qh->qh_next_qtd, Get_QH(pp->pp_qh->qh_dummy_qtd));
2698 }
2699 
2700 
2701 /*
2702  * ehci_deallocate_qtd:
2703  *
2704  * Deallocate a Host Controller's (HC) Transfer Descriptor (QTD).
2705  *
2706  * NOTE: This function is also called from POLLED MODE.
2707  */
2708 void
ehci_deallocate_qtd(ehci_state_t * ehcip,ehci_qtd_t * old_qtd)2709 ehci_deallocate_qtd(
2710 	ehci_state_t		*ehcip,
2711 	ehci_qtd_t		*old_qtd)
2712 {
2713 	ehci_trans_wrapper_t	*tw = NULL;
2714 
2715 	USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl,
2716 	    "ehci_deallocate_qtd: old_qtd = 0x%p", (void *)old_qtd);
2717 
2718 	/*
2719 	 * Obtain the transaction wrapper and tw will be
2720 	 * NULL for the dummy QTDs.
2721 	 */
2722 	if (Get_QTD(old_qtd->qtd_state) != EHCI_QTD_DUMMY) {
2723 		tw = (ehci_trans_wrapper_t *)
2724 		    EHCI_LOOKUP_ID((uint32_t)
2725 		    Get_QTD(old_qtd->qtd_trans_wrapper));
2726 
2727 		ASSERT(tw != NULL);
2728 	}
2729 
2730 	/*
2731 	 * If QTD's transfer wrapper is NULL, don't access its TW.
2732 	 * Just free the QTD.
2733 	 */
2734 	if (tw) {
2735 		ehci_qtd_t	*qtd, *next_qtd;
2736 
2737 		qtd = tw->tw_qtd_head;
2738 
2739 		if (old_qtd != qtd) {
2740 			next_qtd = ehci_qtd_iommu_to_cpu(
2741 			    ehcip, Get_QTD(qtd->qtd_tw_next_qtd));
2742 
2743 			while (next_qtd != old_qtd) {
2744 				qtd = next_qtd;
2745 				next_qtd = ehci_qtd_iommu_to_cpu(
2746 				    ehcip, Get_QTD(qtd->qtd_tw_next_qtd));
2747 			}
2748 
2749 			Set_QTD(qtd->qtd_tw_next_qtd, old_qtd->qtd_tw_next_qtd);
2750 
2751 			if (qtd->qtd_tw_next_qtd == 0) {
2752 				tw->tw_qtd_tail = qtd;
2753 			}
2754 		} else {
2755 			tw->tw_qtd_head = ehci_qtd_iommu_to_cpu(
2756 			    ehcip, Get_QTD(old_qtd->qtd_tw_next_qtd));
2757 
2758 			if (tw->tw_qtd_head == NULL) {
2759 				tw->tw_qtd_tail = NULL;
2760 			}
2761 		}
2762 	}
2763 
2764 	bzero((void *)old_qtd, sizeof (ehci_qtd_t));
2765 	Set_QTD(old_qtd->qtd_state, EHCI_QTD_FREE);
2766 
2767 	USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
2768 	    "Dealloc_qtd: qtd 0x%p", (void *)old_qtd);
2769 }
2770 
2771 
2772 /*
2773  * ehci_qtd_cpu_to_iommu:
2774  *
2775  * This function converts for the given Transfer Descriptor (QTD) CPU address
2776  * to IO address.
2777  *
2778  * NOTE: This function is also called from POLLED MODE.
2779  */
2780 uint32_t
ehci_qtd_cpu_to_iommu(ehci_state_t * ehcip,ehci_qtd_t * addr)2781 ehci_qtd_cpu_to_iommu(
2782 	ehci_state_t	*ehcip,
2783 	ehci_qtd_t	*addr)
2784 {
2785 	uint32_t	td;
2786 
2787 	td  = (uint32_t)ehcip->ehci_qtd_pool_cookie.dmac_address +
2788 	    (uint32_t)((uintptr_t)addr -
2789 	    (uintptr_t)(ehcip->ehci_qtd_pool_addr));
2790 
2791 	ASSERT((ehcip->ehci_qtd_pool_cookie.dmac_address +
2792 	    (uint32_t) (sizeof (ehci_qtd_t) *
2793 	    (addr - ehcip->ehci_qtd_pool_addr))) ==
2794 	    (ehcip->ehci_qtd_pool_cookie.dmac_address +
2795 	    (uint32_t)((uintptr_t)addr - (uintptr_t)
2796 	    (ehcip->ehci_qtd_pool_addr))));
2797 
2798 	ASSERT(td >= ehcip->ehci_qtd_pool_cookie.dmac_address);
2799 	ASSERT(td <= ehcip->ehci_qtd_pool_cookie.dmac_address +
2800 	    sizeof (ehci_qtd_t) * ehci_qtd_pool_size);
2801 
2802 	return (td);
2803 }
2804 
2805 
2806 /*
2807  * ehci_qtd_iommu_to_cpu:
2808  *
2809  * This function converts for the given Transfer Descriptor (QTD) IO address
2810  * to CPU address.
2811  *
2812  * NOTE: This function is also called from POLLED MODE.
2813  */
2814 ehci_qtd_t *
ehci_qtd_iommu_to_cpu(ehci_state_t * ehcip,uintptr_t addr)2815 ehci_qtd_iommu_to_cpu(
2816 	ehci_state_t	*ehcip,
2817 	uintptr_t	addr)
2818 {
2819 	ehci_qtd_t	*qtd;
2820 
2821 	if (addr == 0)
2822 		return (NULL);
2823 
2824 	qtd = (ehci_qtd_t *)((uintptr_t)
2825 	    (addr - ehcip->ehci_qtd_pool_cookie.dmac_address) +
2826 	    (uintptr_t)ehcip->ehci_qtd_pool_addr);
2827 
2828 	ASSERT(qtd >= ehcip->ehci_qtd_pool_addr);
2829 	ASSERT((uintptr_t)qtd <= (uintptr_t)ehcip->ehci_qtd_pool_addr +
2830 	    (uintptr_t)(sizeof (ehci_qtd_t) * ehci_qtd_pool_size));
2831 
2832 	return (qtd);
2833 }
2834 
2835 /*
2836  * ehci_allocate_tds_for_tw_resources:
2837  *
2838  * Allocate n Transfer Descriptors (TD) from the TD buffer pool and places it
2839  * into the TW.  Also chooses the correct alternate qtd when required.	It is
2840  * used for hardware short transfer support.  For more information on
2841  * alternate qtds look at section 3.5.2 in the EHCI spec.
2842  * Here is how each alternate qtd's are used:
2843  *
2844  * Bulk: used fully.
2845  * Intr: xfers only require 1 QTD, so alternate qtds are never used.
2846  * Ctrl: Should not use alternate QTD
2847  * Isoch: Doesn't support short_xfer nor does it use QTD
2848  *
2849  * Returns USB_NO_RESOURCES if it was not able to allocate all the requested TD
2850  * otherwise USB_SUCCESS.
2851  */
2852 int
ehci_allocate_tds_for_tw(ehci_state_t * ehcip,ehci_pipe_private_t * pp,ehci_trans_wrapper_t * tw,size_t qtd_count)2853 ehci_allocate_tds_for_tw(
2854 	ehci_state_t		*ehcip,
2855 	ehci_pipe_private_t	*pp,
2856 	ehci_trans_wrapper_t	*tw,
2857 	size_t			qtd_count)
2858 {
2859 	usb_ep_descr_t		*eptd = &pp->pp_pipe_handle->p_ep;
2860 	uchar_t			attributes;
2861 	ehci_qtd_t		*qtd;
2862 	uint32_t		qtd_addr;
2863 	int			i;
2864 	int			error = USB_SUCCESS;
2865 
2866 	attributes = eptd->bmAttributes & USB_EP_ATTR_MASK;
2867 
2868 	for (i = 0; i < qtd_count; i += 1) {
2869 		qtd = ehci_allocate_qtd_from_pool(ehcip);
2870 		if (qtd == NULL) {
2871 			error = USB_NO_RESOURCES;
2872 			USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
2873 			    "ehci_allocate_qtds_for_tw: "
2874 			    "Unable to allocate %lu QTDs",
2875 			    qtd_count);
2876 			break;
2877 		}
2878 		if (i > 0) {
2879 			qtd_addr = ehci_qtd_cpu_to_iommu(ehcip,
2880 			    tw->tw_qtd_free_list);
2881 			Set_QTD(qtd->qtd_tw_next_qtd, qtd_addr);
2882 		}
2883 		tw->tw_qtd_free_list = qtd;
2884 
2885 		/*
2886 		 * Save the second one as a pointer to the new dummy 1.
2887 		 * It is used later for the alt_qtd_ptr.  Xfers with only
2888 		 * one qtd do not need alt_qtd_ptr.
2889 		 * The tds's are allocated and put into a stack, that is
2890 		 * why the second qtd allocated will turn out to be the
2891 		 * new dummy 1.
2892 		 */
2893 		if ((i == 1) && (attributes == USB_EP_ATTR_BULK)) {
2894 			tw->tw_alt_qtd = qtd;
2895 		}
2896 	}
2897 
2898 	return (error);
2899 }
2900 
2901 /*
2902  * ehci_allocate_tw_resources:
2903  *
2904  * Allocate a Transaction Wrapper (TW) and n Transfer Descriptors (QTD)
2905  * from the QTD buffer pool and places it into the TW.	It does an all
2906  * or nothing transaction.
2907  *
2908  * Returns NULL if there is insufficient resources otherwise TW.
2909  */
2910 static ehci_trans_wrapper_t *
ehci_allocate_tw_resources(ehci_state_t * ehcip,ehci_pipe_private_t * pp,size_t tw_length,usb_flags_t usb_flags,size_t qtd_count)2911 ehci_allocate_tw_resources(
2912 	ehci_state_t		*ehcip,
2913 	ehci_pipe_private_t	*pp,
2914 	size_t			tw_length,
2915 	usb_flags_t		usb_flags,
2916 	size_t			qtd_count)
2917 {
2918 	ehci_trans_wrapper_t	*tw;
2919 
2920 	tw = ehci_create_transfer_wrapper(ehcip, pp, tw_length, usb_flags);
2921 
2922 	if (tw == NULL) {
2923 		USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
2924 		    "ehci_allocate_tw_resources: Unable to allocate TW");
2925 	} else {
2926 		if (ehci_allocate_tds_for_tw(ehcip, pp, tw, qtd_count) ==
2927 		    USB_SUCCESS) {
2928 			tw->tw_num_qtds = (uint_t)qtd_count;
2929 		} else {
2930 			ehci_deallocate_tw(ehcip, pp, tw);
2931 			tw = NULL;
2932 		}
2933 	}
2934 
2935 	return (tw);
2936 }
2937 
2938 
2939 /*
2940  * ehci_free_tw_td_resources:
2941  *
2942  * Free all allocated resources for Transaction Wrapper (TW).
2943  * Does not free the TW itself.
2944  *
2945  * Returns NULL if there is insufficient resources otherwise TW.
2946  */
2947 static void
ehci_free_tw_td_resources(ehci_state_t * ehcip,ehci_trans_wrapper_t * tw)2948 ehci_free_tw_td_resources(
2949 	ehci_state_t		*ehcip,
2950 	ehci_trans_wrapper_t	*tw)
2951 {
2952 	ehci_qtd_t		*qtd = NULL;
2953 	ehci_qtd_t		*temp_qtd = NULL;
2954 
2955 	USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl,
2956 	    "ehci_free_tw_td_resources: tw = 0x%p", (void *)tw);
2957 
2958 	qtd = tw->tw_qtd_free_list;
2959 	while (qtd != NULL) {
2960 		/* Save the pointer to the next qtd before destroying it */
2961 		temp_qtd = ehci_qtd_iommu_to_cpu(ehcip,
2962 		    Get_QTD(qtd->qtd_tw_next_qtd));
2963 		ehci_deallocate_qtd(ehcip, qtd);
2964 		qtd = temp_qtd;
2965 	}
2966 	tw->tw_qtd_free_list = NULL;
2967 }
2968 
2969 /*
2970  * Transfer Wrapper functions
2971  *
2972  * ehci_create_transfer_wrapper:
2973  *
2974  * Create a Transaction Wrapper (TW) and this involves the allocating of DMA
2975  * resources.
2976  */
2977 static ehci_trans_wrapper_t *
ehci_create_transfer_wrapper(ehci_state_t * ehcip,ehci_pipe_private_t * pp,size_t length,uint_t usb_flags)2978 ehci_create_transfer_wrapper(
2979 	ehci_state_t		*ehcip,
2980 	ehci_pipe_private_t	*pp,
2981 	size_t			length,
2982 	uint_t			usb_flags)
2983 {
2984 	ddi_device_acc_attr_t	dev_attr;
2985 	ddi_dma_attr_t		dma_attr;
2986 	int			result;
2987 	size_t			real_length;
2988 	ehci_trans_wrapper_t	*tw;
2989 	int			kmem_flag;
2990 	int			(*dmamem_wait)(caddr_t);
2991 	usb_ep_descr_t		*eptd = &pp->pp_pipe_handle->p_ep;
2992 
2993 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
2994 	    "ehci_create_transfer_wrapper: length = 0x%lx flags = 0x%x",
2995 	    length, usb_flags);
2996 
2997 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
2998 
2999 	/* SLEEP flag should not be used while holding mutex */
3000 	kmem_flag = KM_NOSLEEP;
3001 	dmamem_wait = DDI_DMA_DONTWAIT;
3002 
3003 	/* Allocate space for the transfer wrapper */
3004 	tw = kmem_zalloc(sizeof (ehci_trans_wrapper_t), kmem_flag);
3005 
3006 	if (tw == NULL) {
3007 		USB_DPRINTF_L2(PRINT_MASK_LISTS,  ehcip->ehci_log_hdl,
3008 		    "ehci_create_transfer_wrapper: kmem_zalloc failed");
3009 
3010 		return (NULL);
3011 	}
3012 
3013 	/* zero-length packet doesn't need to allocate dma memory */
3014 	if (length == 0) {
3015 
3016 		goto dmadone;
3017 	}
3018 
3019 	/* allow sg lists for transfer wrapper dma memory */
3020 	bcopy(&ehcip->ehci_dma_attr, &dma_attr, sizeof (ddi_dma_attr_t));
3021 	dma_attr.dma_attr_sgllen = EHCI_DMA_ATTR_TW_SGLLEN;
3022 	dma_attr.dma_attr_align = EHCI_DMA_ATTR_ALIGNMENT;
3023 
3024 	/* Allocate the DMA handle */
3025 	result = ddi_dma_alloc_handle(ehcip->ehci_dip,
3026 	    &dma_attr, dmamem_wait, 0, &tw->tw_dmahandle);
3027 
3028 	if (result != DDI_SUCCESS) {
3029 		USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
3030 		    "ehci_create_transfer_wrapper: Alloc handle failed");
3031 
3032 		kmem_free(tw, sizeof (ehci_trans_wrapper_t));
3033 
3034 		return (NULL);
3035 	}
3036 
3037 	dev_attr.devacc_attr_version = DDI_DEVICE_ATTR_V0;
3038 
3039 	/* no need for swapping the raw data */
3040 	dev_attr.devacc_attr_endian_flags  = DDI_NEVERSWAP_ACC;
3041 	dev_attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC;
3042 
3043 	/* Allocate the memory */
3044 	result = ddi_dma_mem_alloc(tw->tw_dmahandle, length,
3045 	    &dev_attr, DDI_DMA_CONSISTENT, dmamem_wait, NULL,
3046 	    (caddr_t *)&tw->tw_buf, &real_length, &tw->tw_accesshandle);
3047 
3048 	if (result != DDI_SUCCESS) {
3049 		USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
3050 		    "ehci_create_transfer_wrapper: dma_mem_alloc fail");
3051 
3052 		ddi_dma_free_handle(&tw->tw_dmahandle);
3053 		kmem_free(tw, sizeof (ehci_trans_wrapper_t));
3054 
3055 		return (NULL);
3056 	}
3057 
3058 	ASSERT(real_length >= length);
3059 
3060 	/* Bind the handle */
3061 	result = ddi_dma_addr_bind_handle(tw->tw_dmahandle, NULL,
3062 	    (caddr_t)tw->tw_buf, real_length, DDI_DMA_RDWR|DDI_DMA_CONSISTENT,
3063 	    dmamem_wait, NULL, &tw->tw_cookie, &tw->tw_ncookies);
3064 
3065 	if (result != DDI_DMA_MAPPED) {
3066 		ehci_decode_ddi_dma_addr_bind_handle_result(ehcip, result);
3067 
3068 		ddi_dma_mem_free(&tw->tw_accesshandle);
3069 		ddi_dma_free_handle(&tw->tw_dmahandle);
3070 		kmem_free(tw, sizeof (ehci_trans_wrapper_t));
3071 
3072 		return (NULL);
3073 	}
3074 
3075 	tw->tw_cookie_idx = 0;
3076 	tw->tw_dma_offs = 0;
3077 
3078 dmadone:
3079 	/*
3080 	 * Only allow one wrapper to be added at a time. Insert the
3081 	 * new transaction wrapper into the list for this pipe.
3082 	 */
3083 	if (pp->pp_tw_head == NULL) {
3084 		pp->pp_tw_head = tw;
3085 		pp->pp_tw_tail = tw;
3086 	} else {
3087 		pp->pp_tw_tail->tw_next = tw;
3088 		pp->pp_tw_tail = tw;
3089 	}
3090 
3091 	/* Store the transfer length */
3092 	tw->tw_length = length;
3093 
3094 	/* Store a back pointer to the pipe private structure */
3095 	tw->tw_pipe_private = pp;
3096 
3097 	/* Store the transfer type - synchronous or asynchronous */
3098 	tw->tw_flags = usb_flags;
3099 
3100 	/* Get and Store 32bit ID */
3101 	tw->tw_id = EHCI_GET_ID((void *)tw);
3102 
3103 	ASSERT(tw->tw_id != 0);
3104 
3105 	/* isoc ep will not come here */
3106 	if (EHCI_INTR_ENDPOINT(eptd)) {
3107 		ehcip->ehci_periodic_req_count++;
3108 	} else {
3109 		ehcip->ehci_async_req_count++;
3110 	}
3111 	ehci_toggle_scheduler(ehcip);
3112 
3113 	USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl,
3114 	    "ehci_create_transfer_wrapper: tw = 0x%p, ncookies = %u",
3115 	    (void *)tw, tw->tw_ncookies);
3116 
3117 	return (tw);
3118 }
3119 
3120 
3121 /*
3122  * ehci_start_xfer_timer:
3123  *
3124  * Start the timer for the control, bulk and for one time interrupt
3125  * transfers.
3126  */
3127 /* ARGSUSED */
3128 static void
ehci_start_xfer_timer(ehci_state_t * ehcip,ehci_pipe_private_t * pp,ehci_trans_wrapper_t * tw)3129 ehci_start_xfer_timer(
3130 	ehci_state_t		*ehcip,
3131 	ehci_pipe_private_t	*pp,
3132 	ehci_trans_wrapper_t	*tw)
3133 {
3134 	USB_DPRINTF_L3(PRINT_MASK_LISTS,  ehcip->ehci_log_hdl,
3135 	    "ehci_start_xfer_timer: tw = 0x%p", (void *)tw);
3136 
3137 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
3138 
3139 	/*
3140 	 * The timeout handling is done only for control, bulk and for
3141 	 * one time Interrupt transfers.
3142 	 *
3143 	 * NOTE: If timeout is zero; Assume infinite timeout and don't
3144 	 * insert this transfer on the timeout list.
3145 	 */
3146 	if (tw->tw_timeout) {
3147 		/*
3148 		 * Add this transfer wrapper to the head of the pipe's
3149 		 * tw timeout list.
3150 		 */
3151 		if (pp->pp_timeout_list) {
3152 			tw->tw_timeout_next = pp->pp_timeout_list;
3153 		}
3154 
3155 		pp->pp_timeout_list = tw;
3156 		ehci_start_timer(ehcip, pp);
3157 	}
3158 }
3159 
3160 
3161 /*
3162  * ehci_stop_xfer_timer:
3163  *
3164  * Start the timer for the control, bulk and for one time interrupt
3165  * transfers.
3166  */
3167 void
ehci_stop_xfer_timer(ehci_state_t * ehcip,ehci_trans_wrapper_t * tw,uint_t flag)3168 ehci_stop_xfer_timer(
3169 	ehci_state_t		*ehcip,
3170 	ehci_trans_wrapper_t	*tw,
3171 	uint_t			flag)
3172 {
3173 	ehci_pipe_private_t	*pp;
3174 	timeout_id_t		timer_id;
3175 
3176 	USB_DPRINTF_L3(PRINT_MASK_LISTS,  ehcip->ehci_log_hdl,
3177 	    "ehci_stop_xfer_timer: tw = 0x%p", (void *)tw);
3178 
3179 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
3180 
3181 	/* Obtain the pipe private structure */
3182 	pp = tw->tw_pipe_private;
3183 
3184 	/* check if the timeout tw list is empty */
3185 	if (pp->pp_timeout_list == NULL) {
3186 
3187 		return;
3188 	}
3189 
3190 	switch (flag) {
3191 	case EHCI_REMOVE_XFER_IFLAST:
3192 		if (tw->tw_qtd_head != tw->tw_qtd_tail) {
3193 			break;
3194 		}
3195 
3196 		/* FALLTHRU */
3197 	case EHCI_REMOVE_XFER_ALWAYS:
3198 		ehci_remove_tw_from_timeout_list(ehcip, tw);
3199 
3200 		if ((pp->pp_timeout_list == NULL) &&
3201 		    (pp->pp_timer_id)) {
3202 
3203 			timer_id = pp->pp_timer_id;
3204 
3205 			/* Reset the timer id to zero */
3206 			pp->pp_timer_id = 0;
3207 
3208 			mutex_exit(&ehcip->ehci_int_mutex);
3209 
3210 			(void) untimeout(timer_id);
3211 
3212 			mutex_enter(&ehcip->ehci_int_mutex);
3213 		}
3214 		break;
3215 	default:
3216 		break;
3217 	}
3218 }
3219 
3220 
3221 /*
3222  * ehci_xfer_timeout_handler:
3223  *
3224  * Control or bulk transfer timeout handler.
3225  */
3226 static void
ehci_xfer_timeout_handler(void * arg)3227 ehci_xfer_timeout_handler(void *arg)
3228 {
3229 	usba_pipe_handle_data_t	*ph = (usba_pipe_handle_data_t *)arg;
3230 	ehci_state_t		*ehcip = ehci_obtain_state(
3231 	    ph->p_usba_device->usb_root_hub_dip);
3232 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
3233 	ehci_trans_wrapper_t	*tw, *next;
3234 	ehci_trans_wrapper_t	*expire_xfer_list = NULL;
3235 	ehci_qtd_t		*qtd;
3236 
3237 	USB_DPRINTF_L4(PRINT_MASK_LISTS,  ehcip->ehci_log_hdl,
3238 	    "ehci_xfer_timeout_handler: ehcip = 0x%p, ph = 0x%p",
3239 	    (void *)ehcip, (void *)ph);
3240 
3241 	mutex_enter(&ehcip->ehci_int_mutex);
3242 
3243 	/*
3244 	 * Check whether still timeout handler is valid.
3245 	 */
3246 	if (pp->pp_timer_id != 0) {
3247 
3248 		/* Reset the timer id to zero */
3249 		pp->pp_timer_id = 0;
3250 	} else {
3251 		mutex_exit(&ehcip->ehci_int_mutex);
3252 
3253 		return;
3254 	}
3255 
3256 	/* Get the transfer timeout list head */
3257 	tw = pp->pp_timeout_list;
3258 
3259 	while (tw) {
3260 
3261 		/* Get the transfer on the timeout list */
3262 		next = tw->tw_timeout_next;
3263 
3264 		tw->tw_timeout--;
3265 
3266 		if (tw->tw_timeout <= 0) {
3267 
3268 			/* remove the tw from the timeout list */
3269 			ehci_remove_tw_from_timeout_list(ehcip, tw);
3270 
3271 			/* remove QTDs from active QTD list */
3272 			qtd = tw->tw_qtd_head;
3273 			while (qtd) {
3274 				ehci_remove_qtd_from_active_qtd_list(
3275 				    ehcip, qtd);
3276 
3277 				/* Get the next QTD from the wrapper */
3278 				qtd = ehci_qtd_iommu_to_cpu(ehcip,
3279 				    Get_QTD(qtd->qtd_tw_next_qtd));
3280 			}
3281 
3282 			/*
3283 			 * Preserve the order to the requests
3284 			 * started time sequence.
3285 			 */
3286 			tw->tw_timeout_next = expire_xfer_list;
3287 			expire_xfer_list = tw;
3288 		}
3289 
3290 		tw = next;
3291 	}
3292 
3293 	/*
3294 	 * The timer should be started before the callbacks.
3295 	 * There is always a chance that ehci interrupts come
3296 	 * in when we release the mutex while calling the tw back.
3297 	 * To keep an accurate timeout it should be restarted
3298 	 * as soon as possible.
3299 	 */
3300 	ehci_start_timer(ehcip, pp);
3301 
3302 	/* Get the expired transfer timeout list head */
3303 	tw = expire_xfer_list;
3304 
3305 	while (tw) {
3306 
3307 		/* Get the next tw on the expired transfer timeout list */
3308 		next = tw->tw_timeout_next;
3309 
3310 		/*
3311 		 * The error handle routine will release the mutex when
3312 		 * calling back to USBA. But this will not cause any race.
3313 		 * We do the callback and are relying on ehci_pipe_cleanup()
3314 		 * to halt the queue head and clean up since we should not
3315 		 * block in timeout context.
3316 		 */
3317 		ehci_handle_error(ehcip, tw->tw_qtd_head, USB_CR_TIMEOUT);
3318 
3319 		tw = next;
3320 	}
3321 	mutex_exit(&ehcip->ehci_int_mutex);
3322 }
3323 
3324 
3325 /*
3326  * ehci_remove_tw_from_timeout_list:
3327  *
3328  * Remove Control or bulk transfer from the timeout list.
3329  */
3330 static void
ehci_remove_tw_from_timeout_list(ehci_state_t * ehcip,ehci_trans_wrapper_t * tw)3331 ehci_remove_tw_from_timeout_list(
3332 	ehci_state_t		*ehcip,
3333 	ehci_trans_wrapper_t	*tw)
3334 {
3335 	ehci_pipe_private_t	*pp;
3336 	ehci_trans_wrapper_t	*prev, *next;
3337 
3338 	USB_DPRINTF_L3(PRINT_MASK_LISTS,  ehcip->ehci_log_hdl,
3339 	    "ehci_remove_tw_from_timeout_list: tw = 0x%p", (void *)tw);
3340 
3341 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
3342 
3343 	/* Obtain the pipe private structure */
3344 	pp = tw->tw_pipe_private;
3345 
3346 	if (pp->pp_timeout_list) {
3347 		if (pp->pp_timeout_list == tw) {
3348 			pp->pp_timeout_list = tw->tw_timeout_next;
3349 
3350 			tw->tw_timeout_next = NULL;
3351 		} else {
3352 			prev = pp->pp_timeout_list;
3353 			next = prev->tw_timeout_next;
3354 
3355 			while (next && (next != tw)) {
3356 				prev = next;
3357 				next = next->tw_timeout_next;
3358 			}
3359 
3360 			if (next == tw) {
3361 				prev->tw_timeout_next =
3362 				    next->tw_timeout_next;
3363 				tw->tw_timeout_next = NULL;
3364 			}
3365 		}
3366 	}
3367 }
3368 
3369 
3370 /*
3371  * ehci_start_timer:
3372  *
3373  * Start the pipe's timer
3374  */
3375 static void
ehci_start_timer(ehci_state_t * ehcip,ehci_pipe_private_t * pp)3376 ehci_start_timer(
3377 	ehci_state_t		*ehcip,
3378 	ehci_pipe_private_t	*pp)
3379 {
3380 	USB_DPRINTF_L4(PRINT_MASK_LISTS,  ehcip->ehci_log_hdl,
3381 	    "ehci_start_timer: ehcip = 0x%p, pp = 0x%p",
3382 	    (void *)ehcip, (void *)pp);
3383 
3384 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
3385 
3386 	/*
3387 	 * Start the pipe's timer only if currently timer is not
3388 	 * running and if there are any transfers on the timeout
3389 	 * list. This timer will be per pipe.
3390 	 */
3391 	if ((!pp->pp_timer_id) && (pp->pp_timeout_list)) {
3392 		pp->pp_timer_id = timeout(ehci_xfer_timeout_handler,
3393 		    (void *)(pp->pp_pipe_handle), drv_usectohz(1000000));
3394 	}
3395 }
3396 
3397 /*
3398  * ehci_deallocate_tw:
3399  *
3400  * Deallocate of a Transaction Wrapper (TW) and this involves the freeing of
3401  * of DMA resources.
3402  */
3403 void
ehci_deallocate_tw(ehci_state_t * ehcip,ehci_pipe_private_t * pp,ehci_trans_wrapper_t * tw)3404 ehci_deallocate_tw(
3405 	ehci_state_t		*ehcip,
3406 	ehci_pipe_private_t	*pp,
3407 	ehci_trans_wrapper_t	*tw)
3408 {
3409 	ehci_trans_wrapper_t	*prev, *next;
3410 
3411 	USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl,
3412 	    "ehci_deallocate_tw: tw = 0x%p", (void *)tw);
3413 
3414 	/*
3415 	 * If the transfer wrapper has no Host Controller (HC)
3416 	 * Transfer Descriptors (QTD) associated with it,  then
3417 	 * remove the transfer wrapper.
3418 	 */
3419 	if (tw->tw_qtd_head) {
3420 		ASSERT(tw->tw_qtd_tail != NULL);
3421 
3422 		return;
3423 	}
3424 
3425 	ASSERT(tw->tw_qtd_tail == NULL);
3426 
3427 	/* Make sure we return all the unused qtd's to the pool as well */
3428 	ehci_free_tw_td_resources(ehcip, tw);
3429 
3430 	/*
3431 	 * If pp->pp_tw_head and pp->pp_tw_tail are pointing to
3432 	 * given TW then set the head and  tail  equal to NULL.
3433 	 * Otherwise search for this TW in the linked TW's list
3434 	 * and then remove this TW from the list.
3435 	 */
3436 	if (pp->pp_tw_head == tw) {
3437 		if (pp->pp_tw_tail == tw) {
3438 			pp->pp_tw_head = NULL;
3439 			pp->pp_tw_tail = NULL;
3440 		} else {
3441 			pp->pp_tw_head = tw->tw_next;
3442 		}
3443 	} else {
3444 		prev = pp->pp_tw_head;
3445 		next = prev->tw_next;
3446 
3447 		while (next && (next != tw)) {
3448 			prev = next;
3449 			next = next->tw_next;
3450 		}
3451 
3452 		if (next == tw) {
3453 			prev->tw_next = next->tw_next;
3454 
3455 			if (pp->pp_tw_tail == tw) {
3456 				pp->pp_tw_tail = prev;
3457 			}
3458 		}
3459 	}
3460 
3461 	/*
3462 	 * Make sure that, this TW has been removed
3463 	 * from the timeout list.
3464 	 */
3465 	ehci_remove_tw_from_timeout_list(ehcip, tw);
3466 
3467 	/* Deallocate this TW */
3468 	ehci_free_tw(ehcip, pp, tw);
3469 }
3470 
3471 
3472 /*
3473  * ehci_free_dma_resources:
3474  *
3475  * Free dma resources of a Transfer Wrapper (TW) and also free the TW.
3476  *
3477  * NOTE: This function is also called from POLLED MODE.
3478  */
3479 void
ehci_free_dma_resources(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph)3480 ehci_free_dma_resources(
3481 	ehci_state_t		*ehcip,
3482 	usba_pipe_handle_data_t	*ph)
3483 {
3484 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
3485 	ehci_trans_wrapper_t	*head_tw = pp->pp_tw_head;
3486 	ehci_trans_wrapper_t	*next_tw, *tw;
3487 
3488 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
3489 	    "ehci_free_dma_resources: ph = 0x%p", (void *)ph);
3490 
3491 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
3492 
3493 	/* Process the Transfer Wrappers */
3494 	next_tw = head_tw;
3495 	while (next_tw) {
3496 		tw = next_tw;
3497 		next_tw = tw->tw_next;
3498 
3499 		USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
3500 		    "ehci_free_dma_resources: Free TW = 0x%p", (void *)tw);
3501 
3502 		ehci_free_tw(ehcip, pp, tw);
3503 	}
3504 
3505 	/* Adjust the head and tail pointers */
3506 	pp->pp_tw_head = NULL;
3507 	pp->pp_tw_tail = NULL;
3508 }
3509 
3510 
3511 /*
3512  * ehci_free_tw:
3513  *
3514  * Free the Transfer Wrapper (TW).
3515  */
3516 /*ARGSUSED*/
3517 static void
ehci_free_tw(ehci_state_t * ehcip,ehci_pipe_private_t * pp,ehci_trans_wrapper_t * tw)3518 ehci_free_tw(
3519 	ehci_state_t		*ehcip,
3520 	ehci_pipe_private_t	*pp,
3521 	ehci_trans_wrapper_t	*tw)
3522 {
3523 	int	rval;
3524 	usb_ep_descr_t	*eptd = &pp->pp_pipe_handle->p_ep;
3525 
3526 	USB_DPRINTF_L4(PRINT_MASK_ALLOC, ehcip->ehci_log_hdl,
3527 	    "ehci_free_tw: tw = 0x%p", (void *)tw);
3528 
3529 	ASSERT(tw != NULL);
3530 	ASSERT(tw->tw_id != 0);
3531 
3532 	/* Free 32bit ID */
3533 	EHCI_FREE_ID((uint32_t)tw->tw_id);
3534 
3535 	if (tw->tw_dmahandle != NULL) {
3536 		rval = ddi_dma_unbind_handle(tw->tw_dmahandle);
3537 		ASSERT(rval == DDI_SUCCESS);
3538 
3539 		ddi_dma_mem_free(&tw->tw_accesshandle);
3540 		ddi_dma_free_handle(&tw->tw_dmahandle);
3541 	}
3542 
3543 	/* interrupt ep will come to this point */
3544 	if (EHCI_INTR_ENDPOINT(eptd)) {
3545 		ehcip->ehci_periodic_req_count--;
3546 	} else {
3547 		ehcip->ehci_async_req_count--;
3548 	}
3549 	ehci_toggle_scheduler(ehcip);
3550 
3551 	/* Free transfer wrapper */
3552 	kmem_free(tw, sizeof (ehci_trans_wrapper_t));
3553 }
3554 
3555 
3556 /*
3557  * Miscellaneous functions
3558  */
3559 
3560 /*
3561  * ehci_allocate_intr_in_resource
3562  *
3563  * Allocate interrupt request structure for the interrupt IN transfer.
3564  */
3565 /*ARGSUSED*/
3566 int
ehci_allocate_intr_in_resource(ehci_state_t * ehcip,ehci_pipe_private_t * pp,ehci_trans_wrapper_t * tw,usb_flags_t flags)3567 ehci_allocate_intr_in_resource(
3568 	ehci_state_t		*ehcip,
3569 	ehci_pipe_private_t	*pp,
3570 	ehci_trans_wrapper_t	*tw,
3571 	usb_flags_t		flags)
3572 {
3573 	usba_pipe_handle_data_t	*ph = pp->pp_pipe_handle;
3574 	usb_intr_req_t		*curr_intr_reqp;
3575 	usb_opaque_t		client_periodic_in_reqp;
3576 	size_t			length = 0;
3577 
3578 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
3579 	    "ehci_allocate_intr_in_resource:"
3580 	    "pp = 0x%p tw = 0x%p flags = 0x%x", (void *)pp, (void *)tw, flags);
3581 
3582 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
3583 	ASSERT(tw->tw_curr_xfer_reqp == NULL);
3584 
3585 	/* Get the client periodic in request pointer */
3586 	client_periodic_in_reqp = pp->pp_client_periodic_in_reqp;
3587 
3588 	/*
3589 	 * If it a periodic IN request and periodic request is NULL,
3590 	 * allocate corresponding usb periodic IN request for the
3591 	 * current periodic polling request and copy the information
3592 	 * from the saved periodic request structure.
3593 	 */
3594 	if (client_periodic_in_reqp) {
3595 
3596 		/* Get the interrupt transfer length */
3597 		length = ((usb_intr_req_t *)
3598 		    client_periodic_in_reqp)->intr_len;
3599 
3600 		curr_intr_reqp = usba_hcdi_dup_intr_req(ph->p_dip,
3601 		    (usb_intr_req_t *)client_periodic_in_reqp, length, flags);
3602 	} else {
3603 		curr_intr_reqp = usb_alloc_intr_req(ph->p_dip, length, flags);
3604 	}
3605 
3606 	if (curr_intr_reqp == NULL) {
3607 
3608 		USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
3609 		    "ehci_allocate_intr_in_resource: Interrupt"
3610 		    "request structure allocation failed");
3611 
3612 		return (USB_NO_RESOURCES);
3613 	}
3614 
3615 	/* For polled mode */
3616 	if (client_periodic_in_reqp == NULL) {
3617 		curr_intr_reqp->intr_attributes = USB_ATTRS_SHORT_XFER_OK;
3618 		curr_intr_reqp->intr_len = ph->p_ep.wMaxPacketSize;
3619 	} else {
3620 		/* Check and save the timeout value */
3621 		tw->tw_timeout = (curr_intr_reqp->intr_attributes &
3622 		    USB_ATTRS_ONE_XFER) ? curr_intr_reqp->intr_timeout: 0;
3623 	}
3624 
3625 	tw->tw_curr_xfer_reqp = (usb_opaque_t)curr_intr_reqp;
3626 	tw->tw_length = curr_intr_reqp->intr_len;
3627 
3628 	mutex_enter(&ph->p_mutex);
3629 	ph->p_req_count++;
3630 	mutex_exit(&ph->p_mutex);
3631 
3632 	pp->pp_state = EHCI_PIPE_STATE_ACTIVE;
3633 
3634 	return (USB_SUCCESS);
3635 }
3636 
3637 /*
3638  * ehci_pipe_cleanup
3639  *
3640  * Cleanup ehci pipe.
3641  */
3642 void
ehci_pipe_cleanup(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph)3643 ehci_pipe_cleanup(
3644 	ehci_state_t		*ehcip,
3645 	usba_pipe_handle_data_t	*ph)
3646 {
3647 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
3648 	uint_t			pipe_state = pp->pp_state;
3649 	usb_cr_t		completion_reason;
3650 	usb_ep_descr_t		*eptd = &ph->p_ep;
3651 
3652 	USB_DPRINTF_L4(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
3653 	    "ehci_pipe_cleanup: ph = 0x%p", (void *)ph);
3654 
3655 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
3656 
3657 	if (EHCI_ISOC_ENDPOINT(eptd)) {
3658 		ehci_isoc_pipe_cleanup(ehcip, ph);
3659 
3660 		return;
3661 	}
3662 
3663 	ASSERT(!servicing_interrupt());
3664 
3665 	/*
3666 	 * Set the QH's status to Halt condition.
3667 	 * If another thread is halting this function will automatically
3668 	 * wait. If a pipe close happens at this time
3669 	 * we will be in lots of trouble.
3670 	 * If we are in an interrupt thread, don't halt, because it may
3671 	 * do a wait_for_sof.
3672 	 */
3673 	ehci_modify_qh_status_bit(ehcip, pp, SET_HALT);
3674 
3675 	/*
3676 	 * Wait for processing all completed transfers and
3677 	 * to send results to upstream.
3678 	 */
3679 	ehci_wait_for_transfers_completion(ehcip, pp);
3680 
3681 	/* Save the data toggle information */
3682 	ehci_save_data_toggle(ehcip, ph);
3683 
3684 	/*
3685 	 * Traverse the list of QTDs for this pipe using transfer
3686 	 * wrapper. Process these QTDs depending on their status.
3687 	 * And stop the timer of this pipe.
3688 	 */
3689 	ehci_traverse_qtds(ehcip, ph);
3690 
3691 	/* Make sure the timer is not running */
3692 	ASSERT(pp->pp_timer_id == 0);
3693 
3694 	/* Do callbacks for all unfinished requests */
3695 	ehci_handle_outstanding_requests(ehcip, pp);
3696 
3697 	/* Free DMA resources */
3698 	ehci_free_dma_resources(ehcip, ph);
3699 
3700 	switch (pipe_state) {
3701 	case EHCI_PIPE_STATE_CLOSE:
3702 		completion_reason = USB_CR_PIPE_CLOSING;
3703 		break;
3704 	case EHCI_PIPE_STATE_RESET:
3705 	case EHCI_PIPE_STATE_STOP_POLLING:
3706 		/* Set completion reason */
3707 		completion_reason = (pipe_state ==
3708 		    EHCI_PIPE_STATE_RESET) ?
3709 		    USB_CR_PIPE_RESET: USB_CR_STOPPED_POLLING;
3710 
3711 		/* Restore the data toggle information */
3712 		ehci_restore_data_toggle(ehcip, ph);
3713 
3714 		/*
3715 		 * Clear the halt bit to restart all the
3716 		 * transactions on this pipe.
3717 		 */
3718 		ehci_modify_qh_status_bit(ehcip, pp, CLEAR_HALT);
3719 
3720 		/* Set pipe state to idle */
3721 		pp->pp_state = EHCI_PIPE_STATE_IDLE;
3722 
3723 		break;
3724 	}
3725 
3726 	/*
3727 	 * Do the callback for the original client
3728 	 * periodic IN request.
3729 	 */
3730 	if ((EHCI_PERIODIC_ENDPOINT(eptd)) &&
3731 	    ((ph->p_ep.bEndpointAddress & USB_EP_DIR_MASK) ==
3732 	    USB_EP_DIR_IN)) {
3733 
3734 		ehci_do_client_periodic_in_req_callback(
3735 		    ehcip, pp, completion_reason);
3736 	}
3737 }
3738 
3739 
3740 /*
3741  * ehci_wait_for_transfers_completion:
3742  *
3743  * Wait for processing all completed transfers and to send results
3744  * to upstream.
3745  */
3746 static void
ehci_wait_for_transfers_completion(ehci_state_t * ehcip,ehci_pipe_private_t * pp)3747 ehci_wait_for_transfers_completion(
3748 	ehci_state_t		*ehcip,
3749 	ehci_pipe_private_t	*pp)
3750 {
3751 	ehci_trans_wrapper_t	*next_tw = pp->pp_tw_head;
3752 	ehci_qtd_t		*qtd;
3753 
3754 	USB_DPRINTF_L4(PRINT_MASK_LISTS,
3755 	    ehcip->ehci_log_hdl,
3756 	    "ehci_wait_for_transfers_completion: pp = 0x%p", (void *)pp);
3757 
3758 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
3759 
3760 	if ((ehci_state_is_operational(ehcip)) != USB_SUCCESS) {
3761 
3762 		return;
3763 	}
3764 
3765 	pp->pp_count_done_qtds = 0;
3766 
3767 	/* Process the transfer wrappers for this pipe */
3768 	while (next_tw) {
3769 		qtd = (ehci_qtd_t *)next_tw->tw_qtd_head;
3770 
3771 		/*
3772 		 * Walk through each QTD for this transfer wrapper.
3773 		 * If a QTD still exists, then it is either on done
3774 		 * list or on the QH's list.
3775 		 */
3776 		while (qtd) {
3777 			if (!(Get_QTD(qtd->qtd_ctrl) &
3778 			    EHCI_QTD_CTRL_ACTIVE_XACT)) {
3779 				pp->pp_count_done_qtds++;
3780 			}
3781 
3782 			qtd = ehci_qtd_iommu_to_cpu(ehcip,
3783 			    Get_QTD(qtd->qtd_tw_next_qtd));
3784 		}
3785 
3786 		next_tw = next_tw->tw_next;
3787 	}
3788 
3789 	USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
3790 	    "ehci_wait_for_transfers_completion: count_done_qtds = 0x%x",
3791 	    pp->pp_count_done_qtds);
3792 
3793 	if (!pp->pp_count_done_qtds) {
3794 
3795 		return;
3796 	}
3797 
3798 	(void) cv_reltimedwait(&pp->pp_xfer_cmpl_cv, &ehcip->ehci_int_mutex,
3799 	    drv_usectohz(EHCI_XFER_CMPL_TIMEWAIT * 1000000), TR_CLOCK_TICK);
3800 
3801 	if (pp->pp_count_done_qtds) {
3802 
3803 		USB_DPRINTF_L2(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
3804 		    "ehci_wait_for_transfers_completion:"
3805 		    "No transfers completion confirmation received");
3806 	}
3807 }
3808 
3809 /*
3810  * ehci_check_for_transfers_completion:
3811  *
3812  * Check whether anybody is waiting for transfers completion event. If so, send
3813  * this event and also stop initiating any new transfers on this pipe.
3814  */
3815 void
ehci_check_for_transfers_completion(ehci_state_t * ehcip,ehci_pipe_private_t * pp)3816 ehci_check_for_transfers_completion(
3817 	ehci_state_t		*ehcip,
3818 	ehci_pipe_private_t	*pp)
3819 {
3820 	USB_DPRINTF_L4(PRINT_MASK_LISTS,
3821 	    ehcip->ehci_log_hdl,
3822 	    "ehci_check_for_transfers_completion: pp = 0x%p", (void *)pp);
3823 
3824 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
3825 
3826 	if ((pp->pp_state == EHCI_PIPE_STATE_STOP_POLLING) &&
3827 	    (pp->pp_error == USB_CR_NO_RESOURCES) &&
3828 	    (pp->pp_cur_periodic_req_cnt == 0)) {
3829 
3830 		/* Reset pipe error to zero */
3831 		pp->pp_error = 0;
3832 
3833 		/* Do callback for original request */
3834 		ehci_do_client_periodic_in_req_callback(
3835 		    ehcip, pp, USB_CR_NO_RESOURCES);
3836 	}
3837 
3838 	if (pp->pp_count_done_qtds) {
3839 
3840 		USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
3841 		    "ehci_check_for_transfers_completion:"
3842 		    "count_done_qtds = 0x%x", pp->pp_count_done_qtds);
3843 
3844 		/* Decrement the done qtd count */
3845 		pp->pp_count_done_qtds--;
3846 
3847 		if (!pp->pp_count_done_qtds) {
3848 
3849 			USB_DPRINTF_L3(PRINT_MASK_LISTS, ehcip->ehci_log_hdl,
3850 			    "ehci_check_for_transfers_completion:"
3851 			    "Sent transfers completion event pp = 0x%p",
3852 			    (void *)pp);
3853 
3854 			/* Send the transfer completion signal */
3855 			cv_signal(&pp->pp_xfer_cmpl_cv);
3856 		}
3857 	}
3858 }
3859 
3860 
3861 /*
3862  * ehci_save_data_toggle:
3863  *
3864  * Save the data toggle information.
3865  */
3866 static void
ehci_save_data_toggle(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph)3867 ehci_save_data_toggle(
3868 	ehci_state_t		*ehcip,
3869 	usba_pipe_handle_data_t	*ph)
3870 {
3871 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
3872 	usb_ep_descr_t		*eptd = &ph->p_ep;
3873 	uint_t			data_toggle;
3874 	usb_cr_t		error = pp->pp_error;
3875 	ehci_qh_t		*qh = pp->pp_qh;
3876 
3877 	USB_DPRINTF_L4(PRINT_MASK_LISTS,
3878 	    ehcip->ehci_log_hdl,
3879 	    "ehci_save_data_toggle: ph = 0x%p", (void *)ph);
3880 
3881 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
3882 
3883 	/* Reset the pipe error value */
3884 	pp->pp_error = USB_CR_OK;
3885 
3886 	/* Return immediately if it is a control pipe */
3887 	if ((eptd->bmAttributes & USB_EP_ATTR_MASK) ==
3888 	    USB_EP_ATTR_CONTROL) {
3889 
3890 		return;
3891 	}
3892 
3893 	/* Get the data toggle information from the endpoint (QH) */
3894 	data_toggle = (Get_QH(qh->qh_status) &
3895 	    EHCI_QH_STS_DATA_TOGGLE)? DATA1:DATA0;
3896 
3897 	/*
3898 	 * If error is STALL, then, set
3899 	 * data toggle to zero.
3900 	 */
3901 	if (error == USB_CR_STALL) {
3902 		data_toggle = DATA0;
3903 	}
3904 
3905 	/*
3906 	 * Save the data toggle information
3907 	 * in the usb device structure.
3908 	 */
3909 	mutex_enter(&ph->p_mutex);
3910 	usba_hcdi_set_data_toggle(ph->p_usba_device, ph->p_ep.bEndpointAddress,
3911 	    data_toggle);
3912 	mutex_exit(&ph->p_mutex);
3913 }
3914 
3915 
3916 /*
3917  * ehci_restore_data_toggle:
3918  *
3919  * Restore the data toggle information.
3920  */
3921 void
ehci_restore_data_toggle(ehci_state_t * ehcip,usba_pipe_handle_data_t * ph)3922 ehci_restore_data_toggle(
3923 	ehci_state_t		*ehcip,
3924 	usba_pipe_handle_data_t	*ph)
3925 {
3926 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
3927 	usb_ep_descr_t		*eptd = &ph->p_ep;
3928 	uint_t			data_toggle = 0;
3929 
3930 	USB_DPRINTF_L4(PRINT_MASK_LISTS,
3931 	    ehcip->ehci_log_hdl,
3932 	    "ehci_restore_data_toggle: ph = 0x%p", (void *)ph);
3933 
3934 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
3935 
3936 	/* Return immediately if it is a control pipe */
3937 	if ((eptd->bmAttributes & USB_EP_ATTR_MASK) ==
3938 	    USB_EP_ATTR_CONTROL) {
3939 
3940 		return;
3941 	}
3942 
3943 	mutex_enter(&ph->p_mutex);
3944 
3945 	data_toggle = usba_hcdi_get_data_toggle(ph->p_usba_device,
3946 	    ph->p_ep.bEndpointAddress);
3947 	usba_hcdi_set_data_toggle(ph->p_usba_device, ph->p_ep.bEndpointAddress,
3948 	    0);
3949 
3950 	mutex_exit(&ph->p_mutex);
3951 
3952 	/*
3953 	 * Restore the data toggle bit depending on the
3954 	 * previous data toggle information.
3955 	 */
3956 	if (data_toggle) {
3957 		Set_QH(pp->pp_qh->qh_status,
3958 		    Get_QH(pp->pp_qh->qh_status) | EHCI_QH_STS_DATA_TOGGLE);
3959 	} else {
3960 		Set_QH(pp->pp_qh->qh_status,
3961 		    Get_QH(pp->pp_qh->qh_status) & (~EHCI_QH_STS_DATA_TOGGLE));
3962 	}
3963 }
3964 
3965 
3966 /*
3967  * ehci_handle_outstanding_requests
3968  *
3969  * Deallocate interrupt request structure for the interrupt IN transfer.
3970  * Do the callbacks for all unfinished requests.
3971  *
3972  * NOTE: This function is also called from POLLED MODE.
3973  */
3974 void
ehci_handle_outstanding_requests(ehci_state_t * ehcip,ehci_pipe_private_t * pp)3975 ehci_handle_outstanding_requests(
3976 	ehci_state_t		*ehcip,
3977 	ehci_pipe_private_t	*pp)
3978 {
3979 	usba_pipe_handle_data_t	*ph = pp->pp_pipe_handle;
3980 	usb_ep_descr_t		*eptd = &ph->p_ep;
3981 	ehci_trans_wrapper_t	*curr_tw;
3982 	ehci_trans_wrapper_t	*next_tw;
3983 	usb_opaque_t		curr_xfer_reqp;
3984 
3985 	USB_DPRINTF_L4(PRINT_MASK_LISTS,
3986 	    ehcip->ehci_log_hdl,
3987 	    "ehci_handle_outstanding_requests: pp = 0x%p", (void *)pp);
3988 
3989 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
3990 
3991 	/* Deallocate all pre-allocated interrupt requests */
3992 	next_tw = pp->pp_tw_head;
3993 
3994 	while (next_tw) {
3995 		curr_tw = next_tw;
3996 		next_tw = curr_tw->tw_next;
3997 
3998 		curr_xfer_reqp = curr_tw->tw_curr_xfer_reqp;
3999 
4000 		/* Deallocate current interrupt request */
4001 		if (curr_xfer_reqp) {
4002 
4003 			if ((EHCI_PERIODIC_ENDPOINT(eptd)) &&
4004 			    (curr_tw->tw_direction == EHCI_QTD_CTRL_IN_PID)) {
4005 
4006 				/* Decrement periodic in request count */
4007 				pp->pp_cur_periodic_req_cnt--;
4008 
4009 				ehci_deallocate_intr_in_resource(
4010 				    ehcip, pp, curr_tw);
4011 			} else {
4012 				ehci_hcdi_callback(ph, curr_tw, USB_CR_FLUSHED);
4013 			}
4014 		}
4015 	}
4016 }
4017 
4018 
4019 /*
4020  * ehci_deallocate_intr_in_resource
4021  *
4022  * Deallocate interrupt request structure for the interrupt IN transfer.
4023  */
4024 void
ehci_deallocate_intr_in_resource(ehci_state_t * ehcip,ehci_pipe_private_t * pp,ehci_trans_wrapper_t * tw)4025 ehci_deallocate_intr_in_resource(
4026 	ehci_state_t		*ehcip,
4027 	ehci_pipe_private_t	*pp,
4028 	ehci_trans_wrapper_t	*tw)
4029 {
4030 	usba_pipe_handle_data_t	*ph = pp->pp_pipe_handle;
4031 	uchar_t			ep_attr = ph->p_ep.bmAttributes;
4032 	usb_opaque_t		curr_xfer_reqp;
4033 
4034 	USB_DPRINTF_L4(PRINT_MASK_LISTS,
4035 	    ehcip->ehci_log_hdl,
4036 	    "ehci_deallocate_intr_in_resource: "
4037 	    "pp = 0x%p tw = 0x%p", (void *)pp, (void *)tw);
4038 
4039 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
4040 	ASSERT((ep_attr & USB_EP_ATTR_MASK) == USB_EP_ATTR_INTR);
4041 
4042 	curr_xfer_reqp = tw->tw_curr_xfer_reqp;
4043 
4044 	/* Check the current periodic in request pointer */
4045 	if (curr_xfer_reqp) {
4046 
4047 		tw->tw_curr_xfer_reqp = NULL;
4048 
4049 		mutex_enter(&ph->p_mutex);
4050 		ph->p_req_count--;
4051 		mutex_exit(&ph->p_mutex);
4052 
4053 		/* Free pre-allocated interrupt requests */
4054 		usb_free_intr_req((usb_intr_req_t *)curr_xfer_reqp);
4055 
4056 		/* Set periodic in pipe state to idle */
4057 		pp->pp_state = EHCI_PIPE_STATE_IDLE;
4058 	}
4059 }
4060 
4061 
4062 /*
4063  * ehci_do_client_periodic_in_req_callback
4064  *
4065  * Do callback for the original client periodic IN request.
4066  */
4067 void
ehci_do_client_periodic_in_req_callback(ehci_state_t * ehcip,ehci_pipe_private_t * pp,usb_cr_t completion_reason)4068 ehci_do_client_periodic_in_req_callback(
4069 	ehci_state_t		*ehcip,
4070 	ehci_pipe_private_t	*pp,
4071 	usb_cr_t		completion_reason)
4072 {
4073 	usba_pipe_handle_data_t	*ph = pp->pp_pipe_handle;
4074 	usb_ep_descr_t		*eptd = &ph->p_ep;
4075 
4076 	USB_DPRINTF_L4(PRINT_MASK_LISTS,
4077 	    ehcip->ehci_log_hdl,
4078 	    "ehci_do_client_periodic_in_req_callback: "
4079 	    "pp = 0x%p cc = 0x%x", (void *)pp, completion_reason);
4080 
4081 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
4082 
4083 	/*
4084 	 * Check for Interrupt/Isochronous IN, whether we need to do
4085 	 * callback for the original client's periodic IN request.
4086 	 */
4087 	if (pp->pp_client_periodic_in_reqp) {
4088 		ASSERT(pp->pp_cur_periodic_req_cnt == 0);
4089 		if (EHCI_ISOC_ENDPOINT(eptd)) {
4090 			ehci_hcdi_isoc_callback(ph, NULL, completion_reason);
4091 		} else {
4092 			ehci_hcdi_callback(ph, NULL, completion_reason);
4093 		}
4094 	}
4095 }
4096 
4097 
4098 /*
4099  * ehci_hcdi_callback()
4100  *
4101  * Convenience wrapper around usba_hcdi_cb() other than root hub.
4102  */
4103 void
ehci_hcdi_callback(usba_pipe_handle_data_t * ph,ehci_trans_wrapper_t * tw,usb_cr_t completion_reason)4104 ehci_hcdi_callback(
4105 	usba_pipe_handle_data_t	*ph,
4106 	ehci_trans_wrapper_t	*tw,
4107 	usb_cr_t		completion_reason)
4108 {
4109 	ehci_state_t		*ehcip = ehci_obtain_state(
4110 	    ph->p_usba_device->usb_root_hub_dip);
4111 	ehci_pipe_private_t	*pp = (ehci_pipe_private_t *)ph->p_hcd_private;
4112 	usb_opaque_t		curr_xfer_reqp;
4113 	uint_t			pipe_state = 0;
4114 
4115 	USB_DPRINTF_L4(PRINT_MASK_HCDI, ehcip->ehci_log_hdl,
4116 	    "ehci_hcdi_callback: ph = 0x%p, tw = 0x%p, cr = 0x%x",
4117 	    (void *)ph, (void *)tw, completion_reason);
4118 
4119 	ASSERT(mutex_owned(&ehcip->ehci_int_mutex));
4120 
4121 	/* Set the pipe state as per completion reason */
4122 	switch (completion_reason) {
4123 	case USB_CR_OK:
4124 		pipe_state = pp->pp_state;
4125 		break;
4126 	case USB_CR_NO_RESOURCES:
4127 	case USB_CR_NOT_SUPPORTED:
4128 	case USB_CR_PIPE_RESET:
4129 	case USB_CR_STOPPED_POLLING:
4130 		pipe_state = EHCI_PIPE_STATE_IDLE;
4131 		break;
4132 	case USB_CR_PIPE_CLOSING:
4133 		break;
4134 	default:
4135 		/* Set the pipe state to error */
4136 		pipe_state = EHCI_PIPE_STATE_ERROR;
4137 		pp->pp_error = completion_reason;
4138 		break;
4139 
4140 	}
4141 
4142 	pp->pp_state = pipe_state;
4143 
4144 	if (tw && tw->tw_curr_xfer_reqp) {
4145 		curr_xfer_reqp = tw->tw_curr_xfer_reqp;
4146 		tw->tw_curr_xfer_reqp = NULL;
4147 	} else {
4148 		ASSERT(pp->pp_client_periodic_in_reqp != NULL);
4149 
4150 		curr_xfer_reqp = pp->pp_client_periodic_in_reqp;
4151 		pp->pp_client_periodic_in_reqp = NULL;
4152 	}
4153 
4154 	ASSERT(curr_xfer_reqp != NULL);
4155 
4156 	mutex_exit(&ehcip->ehci_int_mutex);
4157 
4158 	usba_hcdi_cb(ph, curr_xfer_reqp, completion_reason);
4159 
4160 	mutex_enter(&ehcip->ehci_int_mutex);
4161 }
4162