1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21
22 /*
23 * Copyright 2009 Sun Microsystems, Inc. All rights reserved.
24 * Use is subject to license terms.
25 */
26
27 /*
28 * Copyright (c) 1988 AT&T
29 * All Rights Reserved
30 */
31
32 /*
33 * Copyright (c) 2018, Joyent, Inc.
34 */
35
36 #include <memory.h>
37 #include <malloc.h>
38 #include <limits.h>
39
40 #include <sgs.h>
41 #include "decl.h"
42 #include "msg.h"
43
44 /*
45 * This module is compiled twice, the second time having
46 * -D_ELF64 defined. The following set of macros, along
47 * with machelf.h, represent the differences between the
48 * two compilations. Be careful *not* to add any class-
49 * dependent code (anything that has elf32 or elf64 in the
50 * name) to this code without hiding it behind a switch-
51 * able macro like these.
52 */
53 #if defined(_ELF64)
54
55 #define FSZ_LONG ELF64_FSZ_XWORD
56 #define ELFCLASS ELFCLASS64
57 #define _elf_snode_init _elf64_snode_init
58 #define _elfxx_cookscn _elf64_cookscn
59 #define _elf_upd_lib _elf64_upd_lib
60 #define elf_fsize elf64_fsize
61 #define _elf_entsz _elf64_entsz
62 #define _elf_msize _elf64_msize
63 #define _elf_upd_usr _elf64_upd_usr
64 #define wrt wrt64
65 #define elf_xlatetof elf64_xlatetof
66 #define _elfxx_update _elf64_update
67 #define _elfxx_swap_wrimage _elf64_swap_wrimage
68
69 #else /* ELF32 */
70
71 #define FSZ_LONG ELF32_FSZ_WORD
72 #define ELFCLASS ELFCLASS32
73 #define _elf_snode_init _elf32_snode_init
74 #define _elfxx_cookscn _elf32_cookscn
75 #define _elf_upd_lib _elf32_upd_lib
76 #define elf_fsize elf32_fsize
77 #define _elf_entsz _elf32_entsz
78 #define _elf_msize _elf32_msize
79 #define _elf_upd_usr _elf32_upd_usr
80 #define wrt wrt32
81 #define elf_xlatetof elf32_xlatetof
82 #define _elfxx_update _elf32_update
83 #define _elfxx_swap_wrimage _elf32_swap_wrimage
84
85 #endif /* ELF64 */
86
87
88 #if !(defined(_LP64) && defined(_ELF64))
89 #define TEST_SIZE
90
91 /*
92 * Handle the decision of whether the current linker can handle the
93 * desired object size, and if not, which error to issue.
94 *
95 * Input is the desired size. On failure, an error has been issued
96 * and 0 is returned. On success, 1 is returned.
97 */
98 static int
test_size(Lword hi)99 test_size(Lword hi)
100 {
101 #ifndef _LP64 /* 32-bit linker */
102 /*
103 * A 32-bit libelf is limited to a 2GB output file. This limit
104 * is due to the fact that off_t is a signed value, and that
105 * libelf cannot support large file support:
106 * - ABI reasons
107 * - Memory use generally is 2x output file size anyway,
108 * so lifting the file size limit will just send
109 * you crashing into the 32-bit VM limit.
110 * If the output is an ELFCLASS64 object, or an ELFCLASS32 object
111 * under 4GB, switching to the 64-bit version of libelf will help.
112 * However, an ELFCLASS32 object must not exceed 4GB.
113 */
114 if (hi > INT_MAX) { /* Bigger than 2GB */
115 #ifndef _ELF64
116 /* ELFCLASS32 object is fundamentally too big? */
117 if (hi > UINT_MAX) {
118 _elf_seterr(EFMT_FBIG_CLASS32, 0);
119 return (0);
120 }
121 #endif /* _ELF64 */
122
123 /* Should switch to the 64-bit libelf? */
124 _elf_seterr(EFMT_FBIG_LARGEFILE, 0);
125 return (0);
126 }
127 #endif /* !_LP64 */
128
129
130 #if defined(_LP64) && !defined(_ELF64) /* 64-bit linker, ELFCLASS32 */
131 /*
132 * A 64-bit linker can produce any size output
133 * file, but if the resulting file is ELFCLASS32,
134 * it must not exceed 4GB.
135 */
136 if (hi > UINT_MAX) {
137 _elf_seterr(EFMT_FBIG_CLASS32, 0);
138 return (0);
139 }
140 #endif
141
142 return (1);
143 }
144 #endif /* TEST_SIZE */
145
146 /*
147 * Output file update
148 * These functions walk an Elf structure, update its information,
149 * and optionally write the output file. Because the application
150 * may control of the output file layout, two upd_... routines
151 * exist. They're similar but too different to merge cleanly.
152 *
153 * The library defines a "dirty" bit to force parts of the file
154 * to be written on update. These routines ignore the dirty bit
155 * and do everything. A minimal update routine might be useful
156 * someday.
157 */
158
159 static size_t
_elf_upd_lib(Elf * elf)160 _elf_upd_lib(Elf * elf)
161 {
162 Lword hi;
163 Lword hibit;
164 Elf_Scn * s;
165 register Lword sz;
166 Ehdr * eh = elf->ed_ehdr;
167 unsigned ver = eh->e_version;
168 register char *p = (char *)eh->e_ident;
169 size_t scncnt;
170
171 /*
172 * Ehdr and Phdr table go first
173 */
174 p[EI_MAG0] = ELFMAG0;
175 p[EI_MAG1] = ELFMAG1;
176 p[EI_MAG2] = ELFMAG2;
177 p[EI_MAG3] = ELFMAG3;
178 p[EI_CLASS] = ELFCLASS;
179 /* LINTED */
180 p[EI_VERSION] = (Byte)ver;
181 hi = elf_fsize(ELF_T_EHDR, 1, ver);
182 /* LINTED */
183 eh->e_ehsize = (Half)hi;
184 if (eh->e_phnum != 0) {
185 /* LINTED */
186 eh->e_phentsize = (Half)elf_fsize(ELF_T_PHDR, 1, ver);
187 /* LINTED */
188 eh->e_phoff = (Off)hi;
189 hi += eh->e_phentsize * eh->e_phnum;
190 } else {
191 eh->e_phoff = 0;
192 eh->e_phentsize = 0;
193 }
194
195 /*
196 * Obtain the first section header. Typically, this section has NULL
197 * contents, however in the case of Extended ELF Sections this section
198 * is used to hold an alternative e_shnum, e_shstrndx and e_phnum.
199 * On initial allocation (see _elf_snode) the elements of this section
200 * would have been zeroed. The e_shnum is initialized later, after the
201 * section header count has been determined. The e_shstrndx and
202 * e_phnum may have already been initialized by the caller (for example,
203 * gelf_update_shdr() in mcs(1)).
204 */
205 if ((s = elf->ed_hdscn) == 0) {
206 eh->e_shnum = 0;
207 scncnt = 0;
208 } else {
209 s = s->s_next;
210 scncnt = 1;
211 }
212
213 /*
214 * Loop through sections. Compute section size before changing hi.
215 * Allow null buffers for NOBITS.
216 */
217 hibit = 0;
218 for (; s != 0; s = s->s_next) {
219 register Dnode *d;
220 register Lword fsz, j;
221 Shdr *sh = s->s_shdr;
222
223 scncnt++;
224 if (sh->sh_type == SHT_NULL) {
225 *sh = _elf_snode_init.sb_shdr;
226 continue;
227 }
228
229 if ((s->s_myflags & SF_READY) == 0)
230 (void) _elfxx_cookscn(s);
231
232 sh->sh_addralign = 1;
233 if ((sz = (Lword)_elf_entsz(elf, sh->sh_type, ver)) != 0)
234 /* LINTED */
235 sh->sh_entsize = (Half)sz;
236 sz = 0;
237 for (d = s->s_hdnode; d != 0; d = d->db_next) {
238 if ((fsz = elf_fsize(d->db_data.d_type,
239 1, ver)) == 0)
240 return (0);
241
242 j = _elf_msize(d->db_data.d_type, ver);
243 fsz *= (d->db_data.d_size / j);
244 d->db_osz = (size_t)fsz;
245 if ((j = d->db_data.d_align) > 1) {
246 if (j > sh->sh_addralign)
247 sh->sh_addralign = (Xword)j;
248
249 if (sz % j != 0)
250 sz += j - sz % j;
251 }
252 d->db_data.d_off = (off_t)sz;
253 d->db_xoff = sz;
254 sz += fsz;
255 }
256
257 sh->sh_size = (Xword) sz;
258 /*
259 * We want to take into account the offsets for NOBITS
260 * sections and let the "sh_offsets" point to where
261 * the section would 'conceptually' fit within
262 * the file (as required by the ABI).
263 *
264 * But - we must also make sure that the NOBITS does
265 * not take up any actual space in the file. We preserve
266 * the actual offset into the file in the 'hibit' variable.
267 * When we come to the first non-NOBITS section after a
268 * encountering a NOBITS section the hi counter is restored
269 * to its proper place in the file.
270 */
271 if (sh->sh_type == SHT_NOBITS) {
272 if (hibit == 0)
273 hibit = hi;
274 } else {
275 if (hibit) {
276 hi = hibit;
277 hibit = 0;
278 }
279 }
280 j = sh->sh_addralign;
281 if ((fsz = hi % j) != 0)
282 hi += j - fsz;
283
284 /* LINTED */
285 sh->sh_offset = (Off)hi;
286 hi += sz;
287 }
288
289 /*
290 * if last section was a 'NOBITS' section then we need to
291 * restore the 'hi' counter to point to the end of the last
292 * non 'NOBITS' section.
293 */
294 if (hibit) {
295 hi = hibit;
296 hibit = 0;
297 }
298
299 /*
300 * Shdr table last
301 */
302 if (scncnt != 0) {
303 if (hi % FSZ_LONG != 0)
304 hi += FSZ_LONG - hi % FSZ_LONG;
305 /* LINTED */
306 eh->e_shoff = (Off)hi;
307 /*
308 * If we are using 'extended sections' then the
309 * e_shnum is stored in the sh_size field of the
310 * first section header.
311 *
312 * NOTE: we set e_shnum to '0' because it's specified
313 * this way in the gABI, and in the hopes that
314 * this will cause less problems to unaware
315 * tools then if we'd set it to SHN_XINDEX (0xffff).
316 */
317 if (scncnt < SHN_LORESERVE)
318 eh->e_shnum = scncnt;
319 else {
320 Shdr *sh;
321 sh = (Shdr *)elf->ed_hdscn->s_shdr;
322 sh->sh_size = scncnt;
323 eh->e_shnum = 0;
324 }
325 /* LINTED */
326 eh->e_shentsize = (Half)elf_fsize(ELF_T_SHDR, 1, ver);
327 hi += eh->e_shentsize * scncnt;
328 } else {
329 eh->e_shoff = 0;
330 eh->e_shentsize = 0;
331 }
332
333 #ifdef TEST_SIZE
334 if (test_size(hi) == 0)
335 return (0);
336 #endif
337
338 return ((size_t)hi);
339 }
340
341
342
343 static size_t
_elf_upd_usr(Elf * elf)344 _elf_upd_usr(Elf * elf)
345 {
346 Lword hi;
347 Elf_Scn * s;
348 register Lword sz;
349 Ehdr * eh = elf->ed_ehdr;
350 unsigned ver = eh->e_version;
351 register char *p = (char *)eh->e_ident;
352 size_t scncnt;
353
354 /*
355 * Ehdr and Phdr table go first
356 */
357 p[EI_MAG0] = ELFMAG0;
358 p[EI_MAG1] = ELFMAG1;
359 p[EI_MAG2] = ELFMAG2;
360 p[EI_MAG3] = ELFMAG3;
361 p[EI_CLASS] = ELFCLASS;
362 /* LINTED */
363 p[EI_VERSION] = (Byte)ver;
364 hi = elf_fsize(ELF_T_EHDR, 1, ver);
365 /* LINTED */
366 eh->e_ehsize = (Half)hi;
367
368 /*
369 * If phnum is zero, phoff "should" be zero too,
370 * but the application is responsible for it.
371 * Allow a non-zero value here and update the
372 * hi water mark accordingly.
373 */
374
375 if (eh->e_phnum != 0)
376 /* LINTED */
377 eh->e_phentsize = (Half)elf_fsize(ELF_T_PHDR, 1, ver);
378 else
379 eh->e_phentsize = 0;
380 if ((sz = eh->e_phoff + eh->e_phentsize * eh->e_phnum) > hi)
381 hi = sz;
382
383 /*
384 * Loop through sections, skipping index zero.
385 * Compute section size before changing hi.
386 * Allow null buffers for NOBITS.
387 */
388
389 if ((s = elf->ed_hdscn) == 0) {
390 eh->e_shnum = 0;
391 scncnt = 0;
392 } else {
393 scncnt = 1;
394 s = s->s_next;
395 }
396 for (; s != 0; s = s->s_next) {
397 register Dnode *d;
398 register Lword fsz, j;
399 Shdr *sh = s->s_shdr;
400
401 if ((s->s_myflags & SF_READY) == 0)
402 (void) _elfxx_cookscn(s);
403
404 ++scncnt;
405 sz = 0;
406 for (d = s->s_hdnode; d != 0; d = d->db_next) {
407 if ((fsz = elf_fsize(d->db_data.d_type, 1,
408 ver)) == 0)
409 return (0);
410 j = _elf_msize(d->db_data.d_type, ver);
411 fsz *= (d->db_data.d_size / j);
412 d->db_osz = (size_t)fsz;
413
414 if ((sh->sh_type != SHT_NOBITS) &&
415 ((j = (d->db_data.d_off + d->db_osz)) > sz))
416 sz = j;
417 }
418 if (sh->sh_size < sz) {
419 _elf_seterr(EFMT_SCNSZ, 0);
420 return (0);
421 }
422 if ((sh->sh_type != SHT_NOBITS) &&
423 (hi < sh->sh_offset + sh->sh_size))
424 hi = sh->sh_offset + sh->sh_size;
425 }
426
427 /*
428 * Shdr table last. Comment above for phnum/phoff applies here.
429 */
430 if (scncnt != 0) {
431 /* LINTED */
432 eh->e_shentsize = (Half)elf_fsize(ELF_T_SHDR, 1, ver);
433 if (scncnt < SHN_LORESERVE) {
434 eh->e_shnum = scncnt;
435 } else {
436 Shdr *sh;
437 sh = (Shdr *)elf->ed_hdscn->s_shdr;
438 sh->sh_size = scncnt;
439 eh->e_shnum = 0;
440 }
441 } else {
442 eh->e_shentsize = 0;
443 }
444
445 if ((sz = eh->e_shoff + eh->e_shentsize * scncnt) > hi)
446 hi = sz;
447
448 #ifdef TEST_SIZE
449 if (test_size(hi) == 0)
450 return (0);
451 #endif
452
453 return ((size_t)hi);
454 }
455
456
457 static size_t
wrt(Elf * elf,Xword outsz,unsigned fill,int update_cmd)458 wrt(Elf * elf, Xword outsz, unsigned fill, int update_cmd)
459 {
460 Elf_Data dst, src;
461 unsigned flag;
462 Xword hi, sz;
463 char *image;
464 Elf_Scn *s;
465 Ehdr *eh = elf->ed_ehdr;
466 unsigned ver = eh->e_version;
467 unsigned encode;
468 int byte;
469 _elf_execfill_func_t *execfill_func;
470
471 /*
472 * If this is an ELF_C_WRIMAGE write, then we encode into the
473 * byte order of the system we are running on rather than that of
474 * of the object. For ld.so.1, this is the same order, but
475 * for 'ld', it might not be in the case where we are cross
476 * linking an object for a different target. In this later case,
477 * the linker-host byte order is necessary so that the linker can
478 * manipulate the resulting image. It is expected that the linker
479 * will call elf_swap_wrimage() if necessary to convert the image
480 * to the target byte order.
481 */
482 encode = (update_cmd == ELF_C_WRIMAGE) ? _elf_sys_encoding() :
483 eh->e_ident[EI_DATA];
484
485 /*
486 * Two issues can cause trouble for the output file.
487 * First, begin() with ELF_C_RDWR opens a file for both
488 * read and write. On the write update(), the library
489 * has to read everything it needs before truncating
490 * the file. Second, using mmap for both read and write
491 * is too tricky. Consequently, the library disables mmap
492 * on the read side. Using mmap for the output saves swap
493 * space, because that mapping is SHARED, not PRIVATE.
494 *
495 * If the file is write-only, there can be nothing of
496 * interest to bother with.
497 *
498 * The following reads the entire file, which might be
499 * more than necessary. Better safe than sorry.
500 */
501
502 if ((elf->ed_myflags & EDF_READ) &&
503 (_elf_vm(elf, (size_t)0, elf->ed_fsz) != OK_YES))
504 return (0);
505
506 flag = elf->ed_myflags & EDF_WRALLOC;
507 if ((image = _elf_outmap(elf->ed_fd, outsz, &flag)) == 0)
508 return (0);
509
510 if (flag == 0)
511 elf->ed_myflags |= EDF_IMALLOC;
512
513 /*
514 * If an error occurs below, a "dirty" bit may be cleared
515 * improperly. To save a second pass through the file,
516 * this code sets the dirty bit on the elf descriptor
517 * when an error happens, assuming that will "cover" any
518 * accidents.
519 */
520
521 /*
522 * Hi is needed only when 'fill' is non-zero.
523 * Fill is non-zero only when the library
524 * calculates file/section/data buffer offsets.
525 * The lib guarantees they increase monotonically.
526 * That guarantees proper filling below.
527 */
528
529
530 /*
531 * Ehdr first
532 */
533
534 src.d_buf = (Elf_Void *)eh;
535 src.d_type = ELF_T_EHDR;
536 src.d_size = sizeof (Ehdr);
537 src.d_version = EV_CURRENT;
538 dst.d_buf = (Elf_Void *)image;
539 dst.d_size = eh->e_ehsize;
540 dst.d_version = ver;
541 if (elf_xlatetof(&dst, &src, encode) == 0)
542 return (0);
543 elf->ed_ehflags &= ~ELF_F_DIRTY;
544 hi = eh->e_ehsize;
545
546 /*
547 * Phdr table if one exists
548 */
549
550 if (eh->e_phnum != 0) {
551 unsigned work;
552 /*
553 * Unlike other library data, phdr table is
554 * in the user version. Change src buffer
555 * version here, fix it after translation.
556 */
557
558 src.d_buf = (Elf_Void *)elf->ed_phdr;
559 src.d_type = ELF_T_PHDR;
560 src.d_size = elf->ed_phdrsz;
561 ELFACCESSDATA(work, _elf_work)
562 src.d_version = work;
563 dst.d_buf = (Elf_Void *)(image + eh->e_phoff);
564 dst.d_size = eh->e_phnum * eh->e_phentsize;
565 hi = (Xword)(eh->e_phoff + dst.d_size);
566 if (elf_xlatetof(&dst, &src, encode) == 0) {
567 elf->ed_uflags |= ELF_F_DIRTY;
568 return (0);
569 }
570 elf->ed_phflags &= ~ELF_F_DIRTY;
571 src.d_version = EV_CURRENT;
572 }
573
574 /*
575 * Loop through sections
576 */
577
578 ELFACCESSDATA(byte, _elf_byte);
579 ELFACCESSDATA(execfill_func, _elf_execfill_func);
580 for (s = elf->ed_hdscn; s != 0; s = s->s_next) {
581 register Dnode *d, *prevd;
582 Xword off = 0;
583 Shdr *sh = s->s_shdr;
584 char *start = image + sh->sh_offset;
585 char *here;
586 _elf_execfill_func_t *execfill;
587
588 /* Only use the execfill function on SHF_EXECINSTR sections */
589 execfill = (sh->sh_flags & SHF_EXECINSTR) ?
590 execfill_func : NULL;
591
592 /*
593 * Just "clean" DIRTY flag for "empty" sections. Even if
594 * NOBITS needs padding, the next thing in the
595 * file will provide it. (And if this NOBITS is
596 * the last thing in the file, no padding needed.)
597 */
598 if ((sh->sh_type == SHT_NOBITS) ||
599 (sh->sh_type == SHT_NULL)) {
600 d = s->s_hdnode, prevd = 0;
601 for (; d != 0; prevd = d, d = d->db_next)
602 d->db_uflags &= ~ELF_F_DIRTY;
603 continue;
604 }
605 /*
606 * Clear out the memory between the end of the last
607 * section and the begining of this section.
608 */
609 if (fill && (sh->sh_offset > hi)) {
610 sz = sh->sh_offset - hi;
611 (void) memset(start - sz, byte, sz);
612 }
613
614
615 for (d = s->s_hdnode, prevd = 0;
616 d != 0; prevd = d, d = d->db_next) {
617 d->db_uflags &= ~ELF_F_DIRTY;
618 here = start + d->db_data.d_off;
619
620 /*
621 * Clear out the memory between the end of the
622 * last update and the start of this data buffer.
623 *
624 * These buffers represent input sections that have
625 * been concatenated into an output section, so if
626 * the output section is executable (SHF_EXECINSTR)
627 * and a fill function has been registered, use the
628 * function. Otherwise, use the fill byte.
629 */
630 if (fill && (d->db_data.d_off > off)) {
631 sz = (Xword)(d->db_data.d_off - off);
632 if (execfill != NULL)
633 (* execfill)(start,
634 here - start - sz, sz);
635 else
636 (void) memset(here - sz, byte, sz);
637 }
638
639 if ((d->db_myflags & DBF_READY) == 0) {
640 SCNLOCK(s);
641 if (_elf_locked_getdata(s, &prevd->db_data) !=
642 &d->db_data) {
643 elf->ed_uflags |= ELF_F_DIRTY;
644 SCNUNLOCK(s);
645 return (0);
646 }
647 SCNUNLOCK(s);
648 }
649 dst.d_buf = (Elf_Void *)here;
650 dst.d_size = d->db_osz;
651
652 /*
653 * Copy the translated bits out to the destination
654 * image.
655 */
656 if (elf_xlatetof(&dst, &d->db_data, encode) == 0) {
657 elf->ed_uflags |= ELF_F_DIRTY;
658 return (0);
659 }
660
661 off = (Xword)(d->db_data.d_off + dst.d_size);
662 }
663 hi = sh->sh_offset + sh->sh_size;
664 }
665
666 /*
667 * Shdr table last
668 */
669
670 if (fill && (eh->e_shoff > hi)) {
671 sz = eh->e_shoff - hi;
672 (void) memset(image + hi, byte, sz);
673 }
674
675 src.d_type = ELF_T_SHDR;
676 src.d_size = sizeof (Shdr);
677 dst.d_buf = (Elf_Void *)(image + eh->e_shoff);
678 dst.d_size = eh->e_shentsize;
679 for (s = elf->ed_hdscn; s != 0; s = s->s_next) {
680 assert((uintptr_t)dst.d_buf < ((uintptr_t)image + outsz));
681 s->s_shflags &= ~ELF_F_DIRTY;
682 s->s_uflags &= ~ELF_F_DIRTY;
683 src.d_buf = s->s_shdr;
684
685 if (elf_xlatetof(&dst, &src, encode) == 0) {
686 elf->ed_uflags |= ELF_F_DIRTY;
687 return (0);
688 }
689
690 dst.d_buf = (char *)dst.d_buf + eh->e_shentsize;
691 }
692 /*
693 * ELF_C_WRIMAGE signifyes that we build the memory image, but
694 * that we do not actually write it to disk. This is used
695 * by ld(1) to build up a full image of an elf file and then
696 * to process the file before it's actually written out to
697 * disk. This saves ld(1) the overhead of having to write
698 * the image out to disk twice.
699 */
700 if (update_cmd == ELF_C_WRIMAGE) {
701 elf->ed_uflags &= ~ELF_F_DIRTY;
702 elf->ed_wrimage = image;
703 elf->ed_wrimagesz = outsz;
704 return (outsz);
705 }
706
707 if (_elf_outsync(elf->ed_fd, image, outsz,
708 ((elf->ed_myflags & EDF_IMALLOC) ? 0 : 1)) != 0) {
709 elf->ed_uflags &= ~ELF_F_DIRTY;
710 elf->ed_myflags &= ~EDF_IMALLOC;
711 return (outsz);
712 }
713
714 elf->ed_uflags |= ELF_F_DIRTY;
715 return (0);
716 }
717
718
719
720
721 /*
722 * The following is a private interface between the linkers (ld & ld.so.1)
723 * and libelf:
724 *
725 * elf_update(elf, ELF_C_WRIMAGE)
726 * This will cause full image representing the elf file
727 * described by the elf pointer to be built in memory. If the
728 * elf pointer has a valid file descriptor associated with it
729 * we will attempt to build the memory image from mmap()'ed
730 * storage. If the elf descriptor does not have a valid
731 * file descriptor (opened with elf_begin(0, ELF_C_IMAGE, 0))
732 * then the image will be allocated from dynamic memory (malloc()).
733 *
734 * elf_update() will return the size of the memory image built
735 * when sucessful.
736 *
737 * When a subsequent call to elf_update() with ELF_C_WRITE as
738 * the command is performed it will sync the image created
739 * by ELF_C_WRIMAGE to disk (if fd available) and
740 * free the memory allocated.
741 */
742
743 off_t
_elfxx_update(Elf * elf,Elf_Cmd cmd)744 _elfxx_update(Elf * elf, Elf_Cmd cmd)
745 {
746 size_t sz;
747 unsigned u;
748 Ehdr *eh = elf->ed_ehdr;
749
750 ELFWLOCK(elf)
751 switch (cmd) {
752 default:
753 _elf_seterr(EREQ_UPDATE, 0);
754 ELFUNLOCK(elf)
755 return (-1);
756
757 case ELF_C_WRIMAGE:
758 if ((elf->ed_myflags & EDF_WRITE) == 0) {
759 _elf_seterr(EREQ_UPDWRT, 0);
760 ELFUNLOCK(elf)
761 return (-1);
762 }
763 break;
764 case ELF_C_WRITE:
765 if ((elf->ed_myflags & EDF_WRITE) == 0) {
766 _elf_seterr(EREQ_UPDWRT, 0);
767 ELFUNLOCK(elf)
768 return (-1);
769 }
770 if (elf->ed_wrimage) {
771 if (elf->ed_myflags & EDF_WRALLOC) {
772 free(elf->ed_wrimage);
773 /*
774 * The size is still returned even
775 * though nothing is actually written
776 * out. This is just to be consistant
777 * with the rest of the interface.
778 */
779 sz = elf->ed_wrimagesz;
780 elf->ed_wrimage = 0;
781 elf->ed_wrimagesz = 0;
782 ELFUNLOCK(elf);
783 return ((off_t)sz);
784 }
785 sz = _elf_outsync(elf->ed_fd, elf->ed_wrimage,
786 elf->ed_wrimagesz,
787 (elf->ed_myflags & EDF_IMALLOC ? 0 : 1));
788 elf->ed_myflags &= ~EDF_IMALLOC;
789 elf->ed_wrimage = 0;
790 elf->ed_wrimagesz = 0;
791 ELFUNLOCK(elf);
792 return ((off_t)sz);
793 }
794 /* FALLTHROUGH */
795 case ELF_C_NULL:
796 break;
797 }
798
799 if (eh == 0) {
800 _elf_seterr(ESEQ_EHDR, 0);
801 ELFUNLOCK(elf)
802 return (-1);
803 }
804
805 if ((u = eh->e_version) > EV_CURRENT) {
806 _elf_seterr(EREQ_VER, 0);
807 ELFUNLOCK(elf)
808 return (-1);
809 }
810
811 if (u == EV_NONE)
812 eh->e_version = EV_CURRENT;
813
814 if ((u = eh->e_ident[EI_DATA]) == ELFDATANONE) {
815 unsigned encode;
816
817 ELFACCESSDATA(encode, _elf_encode)
818 if (encode == ELFDATANONE) {
819 _elf_seterr(EREQ_ENCODE, 0);
820 ELFUNLOCK(elf)
821 return (-1);
822 }
823 /* LINTED */
824 eh->e_ident[EI_DATA] = (Byte)encode;
825 }
826
827 u = 1;
828 if (elf->ed_uflags & ELF_F_LAYOUT) {
829 sz = _elf_upd_usr(elf);
830 u = 0;
831 } else
832 sz = _elf_upd_lib(elf);
833
834 if ((sz != 0) && ((cmd == ELF_C_WRITE) || (cmd == ELF_C_WRIMAGE)))
835 sz = wrt(elf, (Xword)sz, u, cmd);
836
837 if (sz == 0) {
838 ELFUNLOCK(elf)
839 return (-1);
840 }
841
842 ELFUNLOCK(elf)
843 return ((off_t)sz);
844 }
845
846
847 /*
848 * When wrt() processes an ELF_C_WRIMAGE request, the resulting image
849 * gets the byte order (encoding) of the platform running the linker
850 * rather than that of the target host. This allows the linker to modify
851 * the image, prior to flushing it to the output file. This routine
852 * is used to re-translate such an image into the byte order of the
853 * target host.
854 */
855 int
_elfxx_swap_wrimage(Elf * elf)856 _elfxx_swap_wrimage(Elf *elf)
857 {
858 Elf_Data dst, src;
859 Elf_Scn *s;
860 Ehdr *eh;
861 Half e_phnum;
862 unsigned ver;
863 unsigned encode;
864
865 /*
866 * Ehdr first
867 */
868
869 ELFWLOCK(elf);
870 eh = elf->ed_ehdr;
871 e_phnum = eh->e_phnum;
872 ver = eh->e_version;
873 encode = eh->e_ident[EI_DATA];
874
875 src.d_buf = dst.d_buf = (Elf_Void *)eh;
876 src.d_type = dst.d_type = ELF_T_EHDR;
877 src.d_size = dst.d_size = sizeof (Ehdr);
878 src.d_version = dst.d_version = ver;
879 if (elf_xlatetof(&dst, &src, encode) == 0) {
880 ELFUNLOCK(elf);
881 return (1);
882 }
883
884 /*
885 * Phdr table if one exists
886 */
887
888 if (e_phnum != 0) {
889 unsigned work;
890 /*
891 * Unlike other library data, phdr table is
892 * in the user version.
893 */
894
895 src.d_buf = dst.d_buf = (Elf_Void *)elf->ed_phdr;
896 src.d_type = dst.d_type = ELF_T_PHDR;
897 src.d_size = dst.d_size = elf->ed_phdrsz;
898 ELFACCESSDATA(work, _elf_work)
899 src.d_version = dst.d_version = work;
900 if (elf_xlatetof(&dst, &src, encode) == 0) {
901 ELFUNLOCK(elf);
902 return (1);
903 }
904 }
905
906 /*
907 * Loop through sections
908 */
909
910 for (s = elf->ed_hdscn; s != 0; s = s->s_next) {
911 register Dnode *d, *prevd;
912 Shdr *sh = s->s_shdr;
913
914 if ((sh->sh_type == SHT_NOBITS) || (sh->sh_type == SHT_NULL))
915 continue;
916
917 for (d = s->s_hdnode, prevd = 0;
918 d != 0; prevd = d, d = d->db_next) {
919
920 if ((d->db_myflags & DBF_READY) == 0) {
921 SCNLOCK(s);
922 if (_elf_locked_getdata(s, &prevd->db_data) !=
923 &d->db_data) {
924 SCNUNLOCK(s);
925 ELFUNLOCK(elf);
926 return (1);
927 }
928 SCNUNLOCK(s);
929 }
930
931 dst = d->db_data;
932 if (elf_xlatetof(&dst, &d->db_data, encode) == 0) {
933 ELFUNLOCK(elf);
934 return (1);
935 }
936 }
937 }
938
939 /*
940 * Shdr table
941 */
942
943 src.d_type = dst.d_type = ELF_T_SHDR;
944 src.d_version = dst.d_version = ver;
945 for (s = elf->ed_hdscn; s != 0; s = s->s_next) {
946 src.d_buf = dst.d_buf = s->s_shdr;
947 src.d_size = dst.d_size = sizeof (Shdr);
948 if (elf_xlatetof(&dst, &src, encode) == 0) {
949 ELFUNLOCK(elf);
950 return (1);
951 }
952 }
953
954 ELFUNLOCK(elf);
955 return (0);
956 }
957
958
959
960 #ifndef _ELF64
961 /* class-independent, only needs to be compiled once */
962
963 off_t
elf_update(Elf * elf,Elf_Cmd cmd)964 elf_update(Elf *elf, Elf_Cmd cmd)
965 {
966 if (elf == 0)
967 return (-1);
968
969 if (elf->ed_class == ELFCLASS32)
970 return (_elf32_update(elf, cmd));
971 else if (elf->ed_class == ELFCLASS64) {
972 return (_elf64_update(elf, cmd));
973 }
974
975 _elf_seterr(EREQ_CLASS, 0);
976 return (-1);
977 }
978
979 int
_elf_swap_wrimage(Elf * elf)980 _elf_swap_wrimage(Elf *elf)
981 {
982 if (elf == 0)
983 return (0);
984
985 if (elf->ed_class == ELFCLASS32)
986 return (_elf32_swap_wrimage(elf));
987
988 if (elf->ed_class == ELFCLASS64)
989 return (_elf64_swap_wrimage(elf));
990
991 _elf_seterr(EREQ_CLASS, 0);
992 return (0);
993 }
994
995 /*
996 * 4106312, 4106398, This is an ad-hoc means for the 32-bit
997 * Elf64 version of libld.so.3 to get around the limitation
998 * of a 32-bit d_off field. This is only intended to be
999 * used by libld to relocate symbols in large NOBITS sections.
1000 */
1001 Elf64_Off
_elf_getxoff(Elf_Data * d)1002 _elf_getxoff(Elf_Data * d)
1003 {
1004 return (((Dnode *)d)->db_xoff);
1005 }
1006 #endif /* !_ELF64 */
1007