1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright (c) 1990, 2010, Oracle and/or its affiliates. All rights reserved.
24  *
25  * Copyright 2011 Nexenta Systems, Inc.  All rights reserved.
26  */
27 
28 #ifndef	_SYS_SCSI_GENERIC_COMMANDS_H
29 #define	_SYS_SCSI_GENERIC_COMMANDS_H
30 
31 #ifdef	__cplusplus
32 extern "C" {
33 #endif
34 
35 /*
36  * Standard SCSI Command Definitions
37  *
38  * Macros to determine known command sizes
39  */
40 #define	CDB_GROUPID(cmd)	((cmd >> 5) & 0x7)
41 #define	CDB_GROUPID_0	0
42 #define	CDB_GROUPID_1	1
43 #define	CDB_GROUPID_2	2
44 #define	CDB_GROUPID_3	3
45 #define	CDB_GROUPID_4	4
46 #define	CDB_GROUPID_5	5
47 #define	CDB_GROUPID_6	6
48 #define	CDB_GROUPID_7	7
49 
50 #define	CDB_GROUP0	6	/*  6-byte cdb's */
51 #define	CDB_GROUP1	10	/* 10-byte cdb's */
52 #define	CDB_GROUP2	10	/* 10-byte cdb's */
53 #define	CDB_GROUP3	0	/* reserved */
54 #define	CDB_GROUP4	16	/* 16-byte cdb's */
55 #define	CDB_GROUP5	12	/* 12-byte cdb's */
56 #define	CDB_GROUP6	0	/* reserved */
57 #define	CDB_GROUP7	0	/* reserved */
58 
59 /*
60  * Generic Command Definitions
61  * NOTE: CDROM commands are defined in cdio.h
62  */
63 
64 /*
65  * Group 0 Commands (CDB range 0x00 - 0x1F)
66  */
67 #define	SCMD_GROUP0		0x00
68 
69 /*
70  * Group 0 commands, All Devices
71  */
72 #define	SCMD_TEST_UNIT_READY	0x00
73 #define	SCMD_REQUEST_SENSE	0x03
74 #define	SCMD_INQUIRY		0x12
75 #define	SCMD_COPY		0x18
76 #define	SCMD_GDIAG		0x1C	/* receive diagnostic results */
77 #define	SCMD_SDIAG		0x1D	/* send diagnostic results */
78 
79 /*
80  * Group 0 commands, Direct Access Devices
81  */
82 /*	SCMD_TEST_UNIT_READY	0x00	*/
83 #define	SCMD_REZERO_UNIT	0x01
84 /*	SCMD_REQUEST_SENSE	0x03	*/
85 #define	SCMD_FORMAT		0x04
86 #define	SCMD_REASSIGN_BLOCK	0x07
87 #define	SCMD_READ		0x08
88 #define	SCMD_WRITE		0x0a
89 #define	SCMD_SEEK		0x0b
90 /*	SCMD_INQUIRY		0x12	*/
91 #define	SCMD_MODE_SELECT	0x15
92 #define	SCMD_RESERVE		0x16
93 #define	SCMD_RELEASE		0x17
94 /*	SCMD_COPY		0x18	*/
95 #define	SCMD_MODE_SENSE		0x1a
96 #define	SCMD_START_STOP		0x1b
97 /*	SCMD_GDIAG		0x1C	*/
98 /*	SCMD_SDIAG		0x1D	*/
99 #define	SCMD_DOORLOCK		0x1E	/* Prevent/Allow Medium Removal */
100 
101 /*
102  * Group 0 commands, Sequential Access Devices
103  */
104 /*	SCMD_TEST_UNIT_READY	0x00	*/
105 #define	SCMD_REWIND		0x01	/* Note similarity to SCMD_REZERO */
106 /*	SCMD_REQUEST_SENSE	0x03	*/
107 #define	SCMD_READ_BLKLIM	0x05
108 /*	SCMD_READ		0x08	*/
109 /*	SCMD_WRITE		0x0a	*/
110 #define	SCMD_TRK_SEL		0x0b	/* Note similarity to SCMD_SEEK */
111 #define	SCMD_READ_REVERSE	0x0f
112 #define	SCMD_WRITE_FILE_MARK	0x10
113 #define	SCMD_SPACE		0x11
114 /*	SCMD_INQUIRY		0x12	*/
115 #define	SCMD_VERIFY_G0		0x13
116 #define	SCMD_RECOVER_BUF	0x14
117 /*	SCMD_MODE_SELECT	0x15	*/
118 /*	SCMD_RESERVE		0x16	*/
119 /*	SCMD_RELEASE		0x17	*/
120 /*	SCMD_COPY		0x18	*/
121 #define	SCMD_ERASE		0x19
122 /*	SCMD_MODE_SENSE		0x1a	*/
123 #define	SCMD_LOAD		0x1b	/* Note similarity to SCMD_START_STOP */
124 /*	SCMD_GDIAG		0x1c	*/
125 /*	SCMD_SDIAG		0x1d	*/
126 /*	SCMD_DOORLOCK		0x1e	*/
127 
128 
129 /*
130  * Group 0 commands, Printer Devices
131  */
132 /*	SCMD_TEST_UNIT_READY	0x00	*/
133 /*	SCMD_REQUEST_SENSE	0x03	*/
134 /*	SCMD_FORMAT		0x04	*/
135 #define	SCMD_PRINT		0x0a	/* Note similarity to SCMD_WRITE */
136 #define	SCMD_SLEW_PRINT		0x0b	/* ? similar to SCMD_SEEK ? */
137 #define	SCMD_FLUSH_PRINT_BUF	0x10	/* ? similar to SCMD_WRITE_FILE_MARK */
138 /*	SCMD_INQUIRY		0x12	*/
139 /*	SCMD_RECOVER_BUF	0x14	*/
140 /*	SCMD_MODE_SELECT	0x15	*/
141 /*	SCMD_RESERVE		0x16	*/
142 /*	SCMD_RELEASE		0x17	*/
143 /*	SCMD_COPY		0x18	*/
144 /*	SCMD_MODE_SENSE		0x1a	*/
145 #define	SCMD_STOP_PRINT		0x1b	/* Note similarity to SCMD_START_STOP */
146 /*	SCMD_GDIAG		0x1c	*/
147 /*	SCMD_SDIAG		0x1d	*/
148 
149 /*
150  * Group 0 commands, Processor Devices
151  */
152 /*	SCMD_TEST_UNIT_READY	0x00	*/
153 /*	SCMD_REQUEST_SENSE	0x03	*/
154 #define	SCMD_RECEIVE		0x08	/* Note similarity to SCMD_READ */
155 #define	SCMD_SEND		0x0a	/* Note similarity to SCMD_WRITE */
156 /*	SCMD_INQUIRY		0x12	*/
157 /*	SCMD_COPY		0x18	*/
158 /*	SCMD_MODE_SENSE		0x1a	*/
159 /*	SCMD_GDIAG		0x1c	*/
160 /*	SCMD_SDIAG		0x1d	*/
161 
162 /*
163  * Group 0 commands, WORM Devices
164  */
165 /*	SCMD_TEST_UNIT_READY	0x00	*/
166 /*	SCMD_REZERO_UNIT	0x01	*/
167 /*	SCMD_REQUEST_SENSE	0x03	*/
168 /*	SCMD_REASSIGN_BLOCK	0x07	*/
169 /*	SCMD_READ		0x08	*/
170 /*	SCMD_WRITE		0x0a	*/
171 /*	SCMD_SEEK		0x0b	*/
172 /*	SCMD_INQUIRY		0x12	*/
173 /*	SCMD_MODE_SELECT	0x15	*/
174 /*	SCMD_RESERVE		0x16	*/
175 /*	SCMD_RELEASE		0x17	*/
176 /*	SCMD_COPY		0x18	*/
177 /*	SCMD_MODE_SENSE		0x1a	*/
178 /*	SCMD_START_STOP		0x1b	*/
179 /*	SCMD_GDIAG		0x1C	*/
180 /*	SCMD_SDIAG		0x1D	*/
181 /*	SCMD_DOORLOCK		0x1E	*/
182 
183 /*
184  * Group 0 commands, Read Only Devices
185  */
186 /*	SCMD_TEST_UNIT_READY	0x00	*/
187 /*	SCMD_REZERO_UNIT	0x01	*/
188 /*	SCMD_REQUEST_SENSE	0x03	*/
189 /*	SCMD_REASSIGN_BLOCK	0x07	*/
190 /*	SCMD_READ		0x08	*/
191 /*	SCMD_SEEK		0x0b	*/
192 /*	SCMD_INQUIRY		0x12	*/
193 /*	SCMD_MODE_SELECT	0x15	*/
194 /*	SCMD_RESERVE		0x16	*/
195 /*	SCMD_RELEASE		0x17	*/
196 /*	SCMD_COPY		0x18	*/
197 /*	SCMD_MODE_SENSE		0x1a	*/
198 /*	SCMD_START_STOP		0x1b	*/
199 /*	SCMD_GDIAG		0x1C	*/
200 /*	SCMD_SDIAG		0x1D	*/
201 /*	SCMD_DOORLOCK		0x1E	*/
202 
203 /*
204  * Group 1 Commands (CDB range 0x20 - 0x3F)
205  */
206 #define	SCMD_GROUP1		0x20
207 
208 /*
209  * Group 1 Commands, All Devices
210  */
211 #define	SCMD_COMPARE		0x39
212 #define	SCMD_COPY_VERIFY	0x3A
213 #define	SCMD_PERSISTENT_RESERVE_IN		0x5E
214 #define	SCMD_PERSISTENT_RESERVE_OUT		0x5F
215 #define	SCMD_PRIN		SCMD_PERSISTENT_RESERVE_IN
216 #define	SCMD_PROUT		SCMD_PERSISTENT_RESERVE_OUT
217 
218 /*
219  * Group 1 Commands, Direct Access Devices
220  */
221 #define	SCMD_READ_FORMAT_CAP	0x23
222 #define	SCMD_READ_CAPACITY	0x25
223 #define	SCMD_READ_G1		0x28	/* Note that only the group changed */
224 #define	SCMD_WRITE_G1		0x2a	/* Note that only the group changed */
225 #define	SCMD_SEEK_G1		0x2b	/* Note that only the group changed */
226 #define	SCMD_WRITE_VERIFY	0x2e
227 #define	SCMD_VERIFY		0x2f
228 #define	SCMD_SEARCH_HIGH	0x30
229 #define	SCMD_SEARCH_EQUAL	0x31
230 #define	SCMD_SEARCH_LOW		0x32
231 #define	SCMD_SET_LIMITS		0x33
232 #define	SCMD_SYNCHRONIZE_CACHE	0x35
233 #define	SCMD_READ_DEFECT_LIST	0x37
234 #define	SCMD_WRITE_BUFFER	0x3B
235 #define	SCMD_READ_BUFFER	0x3c
236 #define	SCMD_READ_LONG		0x3E
237 #define	SCMD_WRITE_LONG		0x3F
238 #define	SCMD_WRITE_SAME_G1	0x41
239 #define	SCMD_UNMAP		0x42
240 #define	SCMD_GET_CONFIGURATION	0x46
241 #define	SCMD_LOG_SELECT_G1	0x4c
242 #define	SCMD_LOG_SENSE_G1	0x4d
243 #define	SCMD_RESERVE_G1		0x56
244 #define	SCMD_RELEASE_G1		0x57
245 #define	SCMD_MODE_SELECT_G1	0x55
246 #define	SCMD_MODE_SENSE_G1	0x5A
247 
248 
249 /*
250  * Group 1 Commands, Sequential Access Devices
251  */
252 #define	SCMD_LOCATE		0x2B	/* Note similarity to SCMD_SEEK_G1 */
253 #define	SCMD_READ_POSITION	0x34
254 #define	SCMD_REPORT_DENSITIES	0x44
255 
256 /*
257  * Group 1 Commands, Printer Devices
258  */
259 /* (None Defined) */
260 
261 /*
262  * Group 1 Commands, Processor Devices
263  */
264 /* (None Defined) */
265 
266 /*
267  * Group 1 Commands, WORM Devices
268  */
269 /*	SCMD_READ_CAPACITY	0x25	*/
270 /*	SCMD_READ_G1		0x28	*/
271 /*	SCMD_WRITE_G1		0x2a	*/
272 /*	SCMD_SEEK_G1		0x2b	*/
273 /*	SCMD_WRITE_VERIFY	0x2e	*/
274 /*	SCMD_VERIFY		0x2f	*/
275 /*	SCMD_SEARCH_HIGH	0x30	*/
276 /*	SCMD_SEARCH_EQUAL	0x31	*/
277 /*	SCMD_SEARCH_LOW		0x32	*/
278 /*	SCMD_SET_LIMITS		0x33	*/
279 
280 /*
281  * Group 1 Commands, Read Only Devices
282  */
283 /*	SCMD_READ_CAPACITY	0x25	*/
284 /*	SCMD_READ_G1		0x28	*/
285 /*	SCMD_SEEK_G1		0x2b	*/
286 /*	SCMD_VERIFY		0x2f	*/
287 /*	SCMD_SEARCH_HIGH	0x30	*/
288 /*	SCMD_SEARCH_EQUAL	0x31	*/
289 /*	SCMD_SEARCH_LOW		0x32	*/
290 /*	SCMD_SET_LIMITS		0x33	*/
291 
292 /*
293  * Group 1 Commands, MMC Devices
294  */
295 
296 /* GET EVENT STATUS NOTIFICATION, MMC-3 5.6 */
297 #define	SCMD_GET_EVENT_STATUS_NOTIFICATION	0x4a
298 
299 /* event header */
300 #define	SD_GESN_HEADER_LEN			4
301 #define	SD_GESN_HEADER_NEA			0x80	/* byte 2 */
302 #define	SD_GESN_HEADER_CLASS			0x07	/* byte 2 */
303 
304 /* media class event class and event data that follows the header */
305 #define	SD_GESN_MEDIA_CLASS			4
306 
307 #define	SD_GESN_MEDIA_DATA_LEN			4
308 #define	SD_GESN_MEDIA_EVENT_CODE		0x0f	/* byte 0 */
309 #define	SD_GESN_MEDIA_EVENT_STATUS_PRESENT	0x02	/* byte 1 */
310 #define	SD_GESN_MEDIA_EVENT_STATUS_TRAY_OPEN	0x01	/* byte 1 */
311 
312 /* media event code */
313 #define	SD_GESN_MEDIA_EVENT_NOCHG		0
314 #define	SD_GESN_MEDIA_EVENT_EJECTREQUEST	1
315 #define	SD_GESN_MEDIA_EVENT_NEWMEDIA		2
316 #define	SD_GESN_MEDIA_EVENT_MEDIAREMOVAL	3
317 #define	SD_GESN_MEDIA_EVENT_MEDIACHANGED	4
318 #define	SD_GESN_MEDIA_EVENT_BGFORMATCOMPLETED	5
319 #define	SD_GESN_MEDIA_EVENT_BGFORMATRESTARTED	6
320 
321 
322 /*
323  * Group 3 Commands
324  */
325 #define	SCMD_VAR_LEN		0x7f
326 
327 /*
328  * Group 4 Commands, All Devices
329  */
330 #define	SCMD_GROUP4		0x80
331 #define	SCMD_EXTENDED_COPY	0x83
332 #define	SCMD_RECV_COPY_RESULTS	0x84
333 #define	SCMD_VERIFY_G4		0x8f
334 
335 /*
336  * Group 4 Commands, Direct Access Devices
337  */
338 #define	SCMD_READ_G4		0x88
339 #define	SCMD_WRITE_G4		0x8a
340 #define	SCMD_WRITE_VERIFY_G4	0x8e
341 #define	SCMD_WRITE_SAME_G4	0x93
342 #define	SCMD_SVC_ACTION_IN_G4	0x9e
343 #define	SCMD_SVC_ACTION_OUT_G4	0x9f
344 
345 /*
346  * Group 4 Service Actions for Service Action In (16)
347  */
348 #define	SSVC_ACTION_READ_CAPACITY_G4	0x10
349 #define	SSVC_ACTION_READ_LONG_G4	0x11
350 
351 /*
352  * Group 4 Service Actions for Service Action Out (16)
353  */
354 #define	SSVC_ACTION_WRITE_LONG_G4	0x11
355 
356 /*
357  * Group 4 Commands, Sequential Access Devics
358  */
359 #define	SCMD_WRITE_FILE_MARK_G4	0x80
360 #define	SCMD_READ_REVERSE_G4	0x81
361 #define	SCMD_COMPARE_AND_WRITE	0x89
362 #define	SCMD_READ_ATTRIBUTE	0x8c
363 #define	SCMD_WRITE_ATTRIBUTE	0x8d
364 #define	SCMD_SPACE_G4		0x91
365 #define	SCMD_LOCATE_G4		0x92
366 
367 /*
368  * Group 5 commands.
369  */
370 #define	SCMD_GROUP5		0xA0
371 #define	SCMD_REPORT_LUNS	0xA0
372 #define	SCMD_SECURITY_PROTO_IN	0xA2
373 #define	SCMD_MAINTENANCE_IN	0xA3
374 #define	SCMD_MAINTENANCE_OUT	0xA4
375 #define	SCMD_READ_G5		0xA8
376 #define	SCMD_WRITE_G5		0xAA
377 #define	SCMD_SVC_ACTION_OUT_G5	0xA9
378 #define	SCMD_SVC_ACTION_IN_G5	0xAB
379 #define	SCMD_GET_PERFORMANCE	0xAC
380 #define	SCMD_WRITE_VERIFY_G5	0xAE
381 #define	SCMD_VERIFY_G5		0xAF
382 #define	SCMD_SECURITY_PROTO_OUT	0xB5
383 
384 /*
385  * Group 5 Service Actions for Maintenance In (12)
386  */
387 #define	SSVC_ACTION_GET_TARGET_PORT_GROUPS	0x0a
388 #define	SSVC_ACTION_GET_SUPPORTED_OPERATIONS	0x0c
389 #define	SSVC_SCTION_GET_SUPPORTED_MANAGEMENT	0x0d
390 #define	SSVC_ACTION_GET_TIMESTAMP		0x0f
391 
392 /*
393  * Group 5 Service Actions for Maintenance Out (12)
394  */
395 #define	SSVC_ACTION_SET_DEVICE_IDENTIFIER	0x06
396 #define	SSVC_ACTION_SET_PRIORITY		0x0e
397 #define	SSVC_ACTION_SET_TARGET_PORT_GROUPS	0x0a
398 #define	SSVC_ACTION_SET_TIMESTAMP		0x0f
399 
400 /*
401  * Group 5 Service Actions for Service Action In (12)
402  */
403 #define	SSVC_ACTION_READ_MEDIA_SERIAL		0x01
404 /*
405  * scsi_key_strings for SCMD_ definitions
406  *	NOTE: see SCSI_CMDS_KEY_STRINGS_CDIO in cdio.h for additional
407  *	command-to-string translations.
408  */
409 #define	SCSI_CMDS_KEY_STRINGS						\
410 /* 0x00 */ SCMD_TEST_UNIT_READY,	"test_unit_ready",		\
411 /* 0x01 */ SCMD_REWIND |						\
412 		SCMD_REZERO_UNIT,	"rezero/rewind",		\
413 /* 0x03 */ SCMD_REQUEST_SENSE,		"request_sense",		\
414 /* 0x04 */ SCMD_FORMAT,			"format",			\
415 /* 0x05 */ SCMD_READ_BLKLIM,		"read_block_limits",		\
416 /* 0x07 */ SCMD_REASSIGN_BLOCK,		"reassign",			\
417 /* 0x08 */ SCMD_READ |							\
418 		SCMD_RECEIVE,		"read",				\
419 /* 0x0a */ SCMD_PRINT |							\
420 		SCMD_SEND |						\
421 		SCMD_WRITE,		"write",			\
422 /* 0x0b */ SCMD_SEEK |							\
423 		SCMD_SLEW_PRINT |					\
424 		SCMD_TRK_SEL,		"seek",				\
425 /* 0x0f */ SCMD_READ_REVERSE,		"read_reverse",			\
426 /* 0x10 */ SCMD_WRITE_FILE_MARK |					\
427 		SCMD_FLUSH_PRINT_BUF,	"write_file_mark",		\
428 /* 0x11 */ SCMD_SPACE,			"space",			\
429 /* 0x12 */ SCMD_INQUIRY,		"inquiry",			\
430 /* 0x13 */ SCMD_VERIFY_G0,		"verify",			\
431 /* 0x14 */ SCMD_RECOVER_BUF,		"recover_buffer_data",		\
432 /* 0x15 */ SCMD_MODE_SELECT,		"mode_select",			\
433 /* 0x16 */ SCMD_RESERVE,		"reserve",			\
434 /* 0x17 */ SCMD_RELEASE,		"release",			\
435 /* 0x18 */ SCMD_COPY,			"copy",				\
436 /* 0x19 */ SCMD_ERASE,			"erase_tape",			\
437 /* 0x1a */ SCMD_MODE_SENSE,		"mode_sense",			\
438 /* 0x1b */ SCMD_LOAD |							\
439 		SCMD_START_STOP |					\
440 		SCMD_STOP_PRINT,	"load/start/stop",		\
441 /* 0x1c */ SCMD_GDIAG,			"get_diagnostic_results",	\
442 /* 0x1d */ SCMD_SDIAG,			"send_diagnostic_command",	\
443 /* 0x1e */ SCMD_DOORLOCK,		"door_lock",			\
444 /* 0x23 */ SCMD_READ_FORMAT_CAP,	"read_format_capacity",		\
445 /* 0x25 */ SCMD_READ_CAPACITY,		"read_capacity",		\
446 /* 0x28 */ SCMD_READ_G1,		"read(10)",			\
447 /* 0x2a */ SCMD_WRITE_G1,		"write(10)",			\
448 /* 0x2b */ SCMD_SEEK_G1 |						\
449 		SCMD_LOCATE,		"seek(10)",			\
450 /* 0x2e */ SCMD_WRITE_VERIFY,		"write_verify",			\
451 /* 0x2f */ SCMD_VERIFY,			"verify(10)",			\
452 /* 0x30 */ SCMD_SEARCH_HIGH,		"search_data_high",		\
453 /* 0x31 */ SCMD_SEARCH_EQUAL,		"search_data_equal",		\
454 /* 0x32 */ SCMD_SEARCH_LOW,		"search_data_low",		\
455 /* 0x33 */ SCMD_SET_LIMITS,		"set_limits",			\
456 /* 0x34 */ SCMD_READ_POSITION,		"read_position",		\
457 /* 0x35 */ SCMD_SYNCHRONIZE_CACHE,	"synchronize_cache",		\
458 /* 0x37 */ SCMD_READ_DEFECT_LIST,	"read_defect_data",		\
459 /* 0x39 */ SCMD_COMPARE,		"compare",			\
460 /* 0x3a */ SCMD_COPY_VERIFY,		"copy_verify",			\
461 /* 0x3b */ SCMD_WRITE_BUFFER,		"write_buffer",			\
462 /* 0x3c */ SCMD_READ_BUFFER,		"read_buffer",			\
463 /* 0x3e */ SCMD_READ_LONG,		"read_long",			\
464 /* 0x3f */ SCMD_WRITE_LONG,		"write_long",			\
465 /* 0x41 */ SCMD_WRITE_SAME_G1,		"write_same(10)",		\
466 /* 0x42 */ SCMD_UNMAP,			"unmap",			\
467 /* 0x44 */ SCMD_REPORT_DENSITIES |					\
468 		/* SCMD_READ_HEADER (from cdio.h) | */			\
469 		0,			"report_densities/read_header",	\
470 /* 0x46 */ SCMD_GET_CONFIGURATION,	"get_configuration",		\
471 /* 0x4c */ SCMD_LOG_SELECT_G1,		"log_select",			\
472 /* 0x4d */ SCMD_LOG_SENSE_G1,		"log_sense",			\
473 /* 0x55 */ SCMD_MODE_SELECT_G1,		"mode_select(10)",		\
474 /* 0x56 */ SCMD_RESERVE_G1,		"reserve(10)",			\
475 /* 0x57 */ SCMD_RELEASE_G1,		"release(10)",			\
476 /* 0x5a */ SCMD_MODE_SENSE_G1,		"mode_sense(10)",		\
477 /* 0x5e */ SCMD_PERSISTENT_RESERVE_IN,	"persistent_reserve_in",	\
478 /* 0x5f */ SCMD_PERSISTENT_RESERVE_OUT,	"persistent_reserve_out",	\
479 /* 0x80 */ SCMD_WRITE_FILE_MARK_G4,	"write_file_mark(16)",		\
480 /* 0x81 */ SCMD_READ_REVERSE_G4,	"read_reverse(16)",		\
481 /* 0x83 */ SCMD_EXTENDED_COPY,		"extended_copy",		\
482 /* 0x88 */ SCMD_READ_G4,		"read(16)",			\
483 /* 0x8a */ SCMD_WRITE_G4,		"write(16)",			\
484 /* 0x8c */ SCMD_READ_ATTRIBUTE,		"read_attribute",		\
485 /* 0x8d */ SCMD_WRITE_ATTRIBUTE,	"write_attribute",		\
486 /* 0x8e */ SCMD_WRITE_VERIFY_G4,	"write_verify(16)",		\
487 /* 0x8f */ SCMD_VERIFY_G4,		"verify(16)",			\
488 /* 0x91 */ SCMD_SPACE_G4,		"space(16)",			\
489 /* 0x92 */ SCMD_LOCATE_G4,		"locate(16)",			\
490 /* 0x92 */ SCMD_WRITE_SAME_G4,		"write_same(16)",		\
491 /* 0x9e */ SCMD_SVC_ACTION_IN_G4,	"service_action_in(16)",	\
492 /* 0x9f */ SCMD_SVC_ACTION_OUT_G4,	"service_action_out(16)",	\
493 /* 0xa0 */ SCMD_REPORT_LUNS,		"report_luns",			\
494 /* 0xa2 */ SCMD_SECURITY_PROTO_IN,	"security_protocol_in",		\
495 /* 0xa3 */ SCMD_MAINTENANCE_IN,		"maintenance_in",		\
496 /* 0xa4 */ SCMD_MAINTENANCE_OUT,	"maintenance_out",		\
497 /* 0xa8 */ SCMD_READ_G5,		"read(12)",			\
498 /* 0xa9 */ SCMD_SVC_ACTION_OUT_G5,	"service_action_out(12)",	\
499 /* 0xaa */ SCMD_WRITE_G5,		"write(12)",			\
500 /* 0xab */ SCMD_SVC_ACTION_IN_G5,	"service_action_in(12)",	\
501 /* 0xac */ SCMD_GET_PERFORMANCE,	"get_performance",		\
502 /* 0xAE */ SCMD_WRITE_VERIFY_G5,	"write_verify(12)",		\
503 /* 0xAF */ SCMD_VERIFY_G5,		"verify(12)",			\
504 /* 0xb5 */ SCMD_SECURITY_PROTO_OUT,	"security_protocol_out"		\
505 	/* see cdio.h for additional command-to-string translations */
506 
507 /* XXX not a command code, does not belong here */
508 #define	ATAPI_CAPABILITIES	0x2A
509 
510 #ifdef	__cplusplus
511 }
512 #endif
513 
514 /*
515  * Below are inclusions of files describing various command structures
516  * of interest.
517  */
518 #include <sys/scsi/generic/inquiry.h>
519 #include <sys/scsi/generic/sense.h>
520 
521 /*
522  * Private Vendor Unique Commands - Each implementation provides this.
523  */
524 #include <sys/scsi/impl/commands.h>
525 
526 #endif	/* _SYS_SCSI_GENERIC_COMMANDS_H */
527