/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Interrupt Vector Table Configuration */ #include #include #include #include #include #include #include /* * Allocate an Interrupt Vector Table and some interrupt vector data structures * for the reserved pool as part of the startup code. First try to allocate an * interrupt vector data structure from the reserved pool, otherwise allocate it * using kmem cache method. */ static kmutex_t intr_vec_mutex; /* Protect interrupt vector table */ /* * Global softint linked list - used by softint mdb dcmd. */ static kmutex_t softint_mutex; /* Protect global softint linked list */ intr_vec_t *softint_list = NULL; /* Reserved pool for interrupt allocation */ intr_vec_t *intr_vec_pool = NULL; /* For HW and single target SW intrs */ intr_vecx_t *intr_vecx_pool = NULL; /* For multi target SW intrs */ static kmutex_t intr_vec_pool_mutex; /* Protect interrupt vector pool */ /* Kmem cache handle for interrupt allocation */ kmem_cache_t *intr_vec_cache = NULL; /* For HW and single target SW intrs */ static kmutex_t intr_vec_cache_mutex; /* Protect intr_vec_cache usage */ /* * init_ivintr() - Initialize an Interrupt Vector Table. */ void init_ivintr() { mutex_init(&intr_vec_mutex, NULL, MUTEX_DRIVER, NULL); mutex_init(&softint_mutex, NULL, MUTEX_DRIVER, NULL); mutex_init(&intr_vec_pool_mutex, NULL, MUTEX_DRIVER, NULL); mutex_init(&intr_vec_cache_mutex, NULL, MUTEX_DRIVER, NULL); /* * Initialize the reserved interrupt vector data structure pools * used for hardware and software interrupts. */ intr_vec_pool = (intr_vec_t *)((caddr_t)intr_vec_table + (MAXIVNUM * sizeof (intr_vec_t *))); intr_vecx_pool = (intr_vecx_t *)((caddr_t)intr_vec_pool + (MAX_RSVD_IV * sizeof (intr_vec_t))); bzero(intr_vec_table, MAXIVNUM * sizeof (intr_vec_t *)); bzero(intr_vec_pool, MAX_RSVD_IV * sizeof (intr_vec_t)); bzero(intr_vecx_pool, MAX_RSVD_IVX * sizeof (intr_vecx_t)); } /* * fini_ivintr() - Uninitialize an Interrupt Vector Table. */ void fini_ivintr() { mutex_enter(&intr_vec_cache_mutex); if (intr_vec_cache) { kmem_cache_destroy(intr_vec_cache); intr_vec_cache = NULL; } mutex_exit(&intr_vec_cache_mutex); mutex_destroy(&intr_vec_pool_mutex); mutex_destroy(&softint_mutex); mutex_destroy(&intr_vec_mutex); mutex_destroy(&intr_vec_cache_mutex); } /* * iv_alloc() - Allocate an interrupt vector data structure. * * This function allocates an interrupt vector data structure for hardware * and single or multi target software interrupts either from the reserved * pool or using kmem cache method. */ static intr_vec_t * iv_alloc(softint_type_t type) { intr_vec_t *iv_p; int i, count; count = (type == SOFTINT_MT) ? MAX_RSVD_IVX : MAX_RSVD_IV; /* * First try to allocate an interrupt vector data structure from the * reserved pool, otherwise allocate it using kmem_cache_alloc(). */ mutex_enter(&intr_vec_pool_mutex); for (i = 0; i < count; i++) { iv_p = (type == SOFTINT_MT) ? (intr_vec_t *)&intr_vecx_pool[i] : &intr_vec_pool[i]; if (iv_p->iv_pil == 0) { iv_p->iv_pil = 1; /* Default PIL */ break; } } mutex_exit(&intr_vec_pool_mutex); if (i < count) return (iv_p); if (type == SOFTINT_MT) cmn_err(CE_PANIC, "iv_alloc: exceeded number of multi " "target software interrupts, %d", MAX_RSVD_IVX); /* * If the interrupt vector data structure reserved pool is already * exhausted, then allocate an interrupt vector data structure using * kmem_cache_alloc(), but only for the hardware and single software * interrupts. Create a kmem cache for the interrupt allocation, * if it is not already available. */ mutex_enter(&intr_vec_cache_mutex); if (intr_vec_cache == NULL) intr_vec_cache = kmem_cache_create("intr_vec_cache", sizeof (intr_vec_t), 64, NULL, NULL, NULL, NULL, NULL, 0); mutex_exit(&intr_vec_cache_mutex); iv_p = kmem_cache_alloc(intr_vec_cache, KM_SLEEP); bzero(iv_p, sizeof (intr_vec_t)); iv_p->iv_flags = IV_CACHE_ALLOC; return (iv_p); } /* * iv_free() - Free an interrupt vector data structure. */ static void iv_free(intr_vec_t *iv_p) { if (iv_p->iv_flags & IV_CACHE_ALLOC) { ASSERT(!(iv_p->iv_flags & IV_SOFTINT_MT)); kmem_cache_free(intr_vec_cache, iv_p); } else { mutex_enter(&intr_vec_pool_mutex); bzero(iv_p, (iv_p->iv_flags & IV_SOFTINT_MT) ? sizeof (intr_vecx_t) : sizeof (intr_vec_t)); mutex_exit(&intr_vec_pool_mutex); } } /* * add_ivintr() - Add an interrupt handler to the system */ int add_ivintr(uint_t inum, uint_t pil, intrfunc intr_handler, caddr_t intr_arg1, caddr_t intr_arg2, caddr_t intr_payload) { intr_vec_t *iv_p, *new_iv_p; if (inum >= MAXIVNUM || pil > PIL_MAX) return (EINVAL); ASSERT((uintptr_t)intr_handler > KERNELBASE); /* Make sure the payload buffer address is 64 bit aligned */ VERIFY(((uint64_t)intr_payload & 0x7) == 0); new_iv_p = iv_alloc(SOFTINT_ST); mutex_enter(&intr_vec_mutex); for (iv_p = (intr_vec_t *)intr_vec_table[inum]; iv_p; iv_p = iv_p->iv_vec_next) { if (iv_p->iv_pil == pil) { mutex_exit(&intr_vec_mutex); iv_free(new_iv_p); return (EINVAL); } } ASSERT(iv_p == NULL); new_iv_p->iv_handler = intr_handler; new_iv_p->iv_arg1 = intr_arg1; new_iv_p->iv_arg2 = intr_arg2; new_iv_p->iv_payload_buf = intr_payload; new_iv_p->iv_pil = (ushort_t)pil; new_iv_p->iv_inum = inum; new_iv_p->iv_vec_next = (intr_vec_t *)intr_vec_table[inum]; intr_vec_table[inum] = (uint64_t)new_iv_p; mutex_exit(&intr_vec_mutex); return (0); } /* * rem_ivintr() - Remove an interrupt handler from the system */ int rem_ivintr(uint_t inum, uint_t pil) { intr_vec_t *iv_p, *prev_iv_p; if (inum >= MAXIVNUM || pil > PIL_MAX) return (EINVAL); mutex_enter(&intr_vec_mutex); for (iv_p = prev_iv_p = (intr_vec_t *)intr_vec_table[inum]; iv_p; prev_iv_p = iv_p, iv_p = iv_p->iv_vec_next) if (iv_p->iv_pil == pil) break; if (iv_p == NULL) { mutex_exit(&intr_vec_mutex); return (EIO); } ASSERT(iv_p->iv_pil_next == NULL); if (prev_iv_p == iv_p) intr_vec_table[inum] = (uint64_t)iv_p->iv_vec_next; else prev_iv_p->iv_vec_next = iv_p->iv_vec_next; mutex_exit(&intr_vec_mutex); iv_free(iv_p); return (0); } /* * add_softintr() - add a software interrupt handler to the system */ uint64_t add_softintr(uint_t pil, softintrfunc intr_handler, caddr_t intr_arg1, softint_type_t type) { intr_vec_t *iv_p; if (pil > PIL_MAX) return ((uint64_t)NULL); iv_p = iv_alloc(type); iv_p->iv_handler = (intrfunc)intr_handler; iv_p->iv_arg1 = intr_arg1; iv_p->iv_pil = (ushort_t)pil; if (type == SOFTINT_MT) iv_p->iv_flags |= IV_SOFTINT_MT; mutex_enter(&softint_mutex); if (softint_list) iv_p->iv_vec_next = softint_list; softint_list = iv_p; mutex_exit(&softint_mutex); return ((uint64_t)iv_p); } /* * rem_softintr() - remove a software interrupt handler from the system */ int rem_softintr(uint64_t softint_id) { intr_vec_t *iv_p = (intr_vec_t *)softint_id; ASSERT(iv_p != NULL); if (iv_p->iv_flags & IV_SOFTINT_PEND) return (EIO); ASSERT(iv_p->iv_pil_next == NULL); mutex_enter(&softint_mutex); if (softint_list == iv_p) { softint_list = iv_p->iv_vec_next; } else { intr_vec_t *list = softint_list; while (list && (list->iv_vec_next != iv_p)) list = list->iv_vec_next; list->iv_vec_next = iv_p->iv_vec_next; } mutex_exit(&softint_mutex); iv_free(iv_p); return (0); } /* * update_softint_arg2() - Update softint arg2. * * NOTE: Do not grab any mutex in this function since it may get called * from the high-level interrupt context. */ int update_softint_arg2(uint64_t softint_id, caddr_t intr_arg2) { intr_vec_t *iv_p = (intr_vec_t *)softint_id; ASSERT(iv_p != NULL); if (iv_p->iv_flags & IV_SOFTINT_PEND) return (EIO); iv_p->iv_arg2 = intr_arg2; return (0); } /* * update_softint_pri() - Update softint priority. */ int update_softint_pri(uint64_t softint_id, uint_t pil) { intr_vec_t *iv_p = (intr_vec_t *)softint_id; ASSERT(iv_p != NULL); if (pil > PIL_MAX) return (EINVAL); iv_p->iv_pil = pil; return (0); }