/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2005 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SYS_USB_UHCID_H #define _SYS_USB_UHCID_H #pragma ident "%Z%%M% %I% %E% SMI" #ifdef __cplusplus extern "C" { #endif /* * Universal Host Controller Driver (UHCI) * * The UHCI driver is a driver which interfaces to the Universal * Serial Bus Driver (USBA) and the Host Controller (HC). The interface to * the Host Controller is defined by the Universal Host Controller Interface. * * This file contains the data structures for the UHCI driver. */ #include #include #include #include #include #include #include #include #include #include #include #include /* limit the xfer size for bulk */ #define UHCI_BULK_MAX_XFER_SIZE (124*1024) /* Max bulk xfer size */ /* Maximum allowable data transfer size per transaction */ #define UHCI_MAX_TD_XFER_SIZE 0x2000 /* Maximum data per transaction */ /* * Generic UHCI Macro definitions */ #define UHCI_UNDERRUN_OCCURRED 0x1234 #define UHCI_OVERRUN_OCCURRED 0x5678 #define UHCI_PROP_MASK 0x01000020 #define UHCI_RESET_DELAY 15000 #define UHCI_TIMEWAIT 10000 #define MAX_SOF_WAIT_COUNT 2 #define MAX_RH_PORTS 2 #define DISCONNECTED 2 #define POLLING_FREQ_7MS 7 #define PCI_CONF_IOBASE 0x20 #define PCI_CONF_IOBASE_MASK 0xffe0 #define UHCI_ONE_SECOND drv_usectohz(1000000) #define UHCI_ONE_MS drv_usectohz(1000) #define UHCI_32_MS drv_usectohz(32*1000) #define UHCI_MAX_INSTS 4 #define POLLED_RAW_BUF_SIZE 8 /* Default time out values for bulk and ctrl commands */ #define UHCI_CTRL_TIMEOUT 5 #define UHCI_BULK_TIMEOUT 60 /* UHCI root hub structure */ typedef struct uhci_root_hub_info { uint_t rh_status; /* Last RH status */ uint_t rh_num_ports; /* #ports on the root */ /* Last status of ports */ uint_t rh_port_status[MAX_RH_PORTS]; uint_t rh_port_changes[MAX_RH_PORTS]; uint_t rh_port_state[MAX_RH_PORTS]; /* See below */ usba_pipe_handle_data_t *rh_intr_pipe_handle; /* RH intr pipe hndle */ usb_hub_descr_t rh_descr; /* RH descr's copy */ uint_t rh_pipe_state; /* RH intr pipe state */ usb_intr_req_t *rh_curr_intr_reqp; /* Current intr req */ usb_intr_req_t *rh_client_intr_req; /* save IN request */ } uhci_root_hub_info_t; /* * UHCI Host Controller per instance data structure * * The Host Controller Driver (HCD) maintains the state of Host Controller * (HC). There is an uhci_state structure per instance of the UHCI * host controller. */ typedef struct uhci_state { dev_info_t *uhci_dip; /* dip of HC */ uint_t uhci_instance; usba_hcdi_ops_t *uhci_hcdi_ops; /* HCDI structure */ uint_t uhci_dma_addr_bind_flag; /* Flag of uhci controller initialization */ boolean_t uhci_ctlr_init_flag; hc_regs_t *uhci_regsp; /* Host ctlr regs */ ddi_acc_handle_t uhci_regs_handle; /* Reg handle */ ddi_acc_handle_t uhci_config_handle; /* Config space hndle */ /* Frame interval reg */ uint_t uhci_frame_interval; ddi_dma_attr_t uhci_dma_attr; /* DMA attributes */ ddi_intr_handle_t *uhci_htable; /* intr handle */ kmutex_t uhci_int_mutex; /* Mutex for struct */ frame_lst_table_t *uhci_frame_lst_tablep; /* Virtual HCCA ptr */ uhci_td_t *uhci_isoc_q_tailp[NUM_FRAME_LST_ENTRIES]; ddi_dma_cookie_t uhci_flt_cookie; /* DMA cookie */ ddi_dma_handle_t uhci_flt_dma_handle; /* DMA handle */ ddi_acc_handle_t uhci_flt_mem_handle; /* Memory handle */ /* * There are two pools of memory. One pool contains the memory for * the transfer descriptors and other pool contains the memory for * the Queue Head pointers. The advantage of the pools is that it's * easy to go back and forth between the iommu and the cpu addresses. * * The pools are protected by the int_mutex because the memory * in the pools may be accessed by either the host controller or the * host controller driver. */ /* General transfer descriptor pool */ uhci_td_t *uhci_td_pool_addr; /* Start of the pool */ ddi_dma_cookie_t uhci_td_pool_cookie; /* DMA cookie */ ddi_dma_handle_t uhci_td_pool_dma_handle; /* DMA hndle */ ddi_acc_handle_t uhci_td_pool_mem_handle; /* Mem hndle */ /* Endpoint descriptor pool */ queue_head_t *uhci_qh_pool_addr; /* Start of the pool */ ddi_dma_cookie_t uhci_qh_pool_cookie; /* DMA cookie */ ddi_dma_handle_t uhci_qh_pool_dma_handle; /* DMA handle */ ddi_acc_handle_t uhci_qh_pool_mem_handle; /* Mem handle */ /* Semaphore to serialize opens and closes */ ksema_t uhci_ocsem; /* Timeout id of the root hub status change pipe handler */ timeout_id_t uhci_timeout_id; /* Timeout id of the ctrl/bulk/intr xfers timeout */ timeout_id_t uhci_cmd_timeout_id; /* * Bandwidth fields * * The uhci_bandwidth array keeps track of the allocated bandwidth * for this host controller. The uhci_bandwidth_isoch_sum field * represents the sum of the allocated isochronous bandwidth. The * total bandwidth allocated for least allocated list out of the 32 * interrupt lists is represented by the uhci_bandwdith_intr_min * field. */ uint_t uhci_bandwidth[NUM_FRAME_LST_ENTRIES]; uint_t uhci_bandwidth_isoch_sum; uint_t uhci_bandwidth_intr_min; uhci_root_hub_info_t uhci_root_hub; /* Root hub info */ uhci_td_t *uhci_outst_tds_head; uhci_td_t *uhci_outst_tds_tail; queue_head_t *uhci_ctrl_xfers_q_head; queue_head_t *uhci_ctrl_xfers_q_tail; queue_head_t *uhci_bulk_xfers_q_head; queue_head_t *uhci_bulk_xfers_q_tail; kcondvar_t uhci_cv_SOF; uchar_t uhci_cv_signal; /* Polled I/O support */ frame_lst_table_t uhci_polled_save_IntTble[1024]; uint_t uhci_polled_count; uint32_t uhci_polled_flag; /* Software frame number */ usb_frame_number_t uhci_sw_frnum; /* Number of pending bulk commands */ uint32_t uhci_pending_bulk_cmds; /* logging support */ usb_log_handle_t uhci_log_hdl; /* * TD's used for the generation of interrupt */ queue_head_t *uhci_isoc_qh; uhci_td_t *uhci_sof_td; uhci_td_t *uhci_isoc_td; /* * Keep io base address, for debugging purpose */ uint_t uhci_iobase; /* * kstat structures */ kstat_t *uhci_intrs_stats; kstat_t *uhci_total_stats; kstat_t *uhci_count_stats[USB_N_COUNT_KSTATS]; } uhci_state_t; /* * uhci_dma_addr_bind_flag values * * This flag indicates if the various DMA addresses allocated by the UHCI * have been bound to their respective handles. This is needed to recover * without errors from uhci_cleanup when it calls ddi_dma_unbind_handle() */ #define UHCI_TD_POOL_BOUND 0x01 /* for TD pools */ #define UHCI_QH_POOL_BOUND 0x02 /* for QH pools */ #define UHCI_FLA_POOL_BOUND 0x04 /* for Host Ctrlr Framelist Area */ /* * Definitions for uhci_polled_flag * The flag is set to UHCI_POLLED_FLAG_FALSE by default. The flags is * set to UHCI_POLLED_FLAG_TD_COMPL when shifting from normal mode to * polled mode and if the normal TD is completed at that time. And the * flag is set to UHCI_POLLED_FLAG_TRUE while exiting from the polled * mode. In the timeout handler for root hub status change, this flag * is checked. If set to UHCI_POLLED_FLAG_TRUE, the routine * uhci_process_submitted_td_queue() to process the completed TD. */ #define UHCI_POLLED_FLAG_FALSE 0 #define UHCI_POLLED_FLAG_TRUE 1 #define UHCI_POLLED_FLAG_TD_COMPL 2 /* * Pipe private structure * * There is an instance of this structure per pipe. This structure holds * HCD specific pipe information. A pointer to this structure is kept in * the USBA pipe handle (usba_pipe_handle_data_t). */ typedef struct uhci_pipe_private { usba_pipe_handle_data_t *pp_pipe_handle; /* Back ptr to pipe handle */ queue_head_t *pp_qh; /* Pipe's ept */ uint_t pp_state; /* See below */ usb_pipe_policy_t pp_policy; /* Copy of the pipe policy */ uint_t pp_node; /* Node in lattice */ uchar_t pp_data_toggle; /* save data toggle bit */ /* * Each pipe may have multiple transfer wrappers. Each transfer * wrapper represents a USB transfer on the bus. A transfer is * made up of one or more transactions. */ struct uhci_trans_wrapper *pp_tw_head; /* Head of the list */ struct uhci_trans_wrapper *pp_tw_tail; /* Tail of the list */ /* * Starting frame number at which next isoc TD will be inserted * for this pipe */ uint64_t pp_frame_num; /* * HCD gets Interrupt/Isochronous IN polling request only once and * it has to insert next polling requests after completion of first * request until either stop polling/pipe close is called. So HCD * has to take copy of the original Interrupt/Isochronous IN request. */ usb_opaque_t pp_client_periodic_in_reqp; } uhci_pipe_private_t; /* warlock directives, stable data */ _NOTE(MUTEX_PROTECTS_DATA(uhci_state_t::uhci_int_mutex, uhci_pipe_private_t)) _NOTE(LOCK_ORDER(uhci_state::uhci_int_mutex \ usba_pipe_handle_data::p_mutex \ usba_device::usb_mutex \ usba_ph_impl::usba_ph_mutex)) _NOTE(SCHEME_PROTECTS_DATA("private mutex", kstat_io)) _NOTE(SCHEME_PROTECTS_DATA("unshared", usb_isoc_pkt_descr)) /* * Pipe states * * uhci pipe states will be similar to usba. Refer usbai.h. */ #define UHCI_PIPE_STATE_IDLE 1 /* Pipe has opened,ready state */ #define UHCI_PIPE_STATE_ACTIVE 2 /* Polling the endpoint,busy state */ /* * to indicate if we are in close/reset so that we can issue callbacks to * IN packets that are pending */ #define UHCI_IN_CLOSE 4 #define UHCI_IN_RESET 5 #define UHCI_IN_ERROR 6 /* Function prototype */ typedef void (*uhci_handler_function_t) (uhci_state_t *uhcip, uhci_td_t *td); /* * Transfer wrapper * * The transfer wrapper represents a USB transfer on the bus and there * is one instance per USB transfer. A transfer is made up of one or * more transactions. * * Control and bulk pipes will have one transfer wrapper per transfer * and where as Isochronous and Interrupt pipes will only have one * transfer wrapper. The transfers wrapper are continually reused for * the Interrupt and Isochronous pipes as those pipes are polled. */ typedef struct uhci_trans_wrapper { struct uhci_trans_wrapper *tw_next; /* Next wrapper */ uhci_pipe_private_t *tw_pipe_private; size_t tw_length; /* Txfer length */ uint_t tw_tmp; /* Temp variable */ ddi_dma_handle_t tw_dmahandle; /* DMA handle */ ddi_acc_handle_t tw_accesshandle; /* Acc hndle */ char *tw_buf; /* Buffer for txfer */ ddi_dma_cookie_t tw_cookie; /* DMA cookie */ int tw_ctrl_state; /* See below */ uhci_td_t *tw_hctd_head; /* Head TD */ uhci_td_t *tw_hctd_tail; /* Tail TD */ uint_t tw_direction; /* Direction of TD */ usb_flags_t tw_flags; /* Flags */ /* * This is the function to call when this td is done. This way * we don't have to look in the td to figure out what kind it is. */ uhci_handler_function_t tw_handle_td; /* * This is the callback value used when processing a done td. */ usb_opaque_t tw_handle_callback_value; uint_t tw_bytes_xfered; uint_t tw_bytes_pending; /* Maximum amount of time for this command */ uint_t tw_timeout_cnt; usb_isoc_req_t *tw_isoc_req; uhci_bulk_isoc_xfer_t tw_xfer_info; /* This is used to avoid multiple tw deallocation */ uint_t tw_claim; /* * Pointer to the data in case of send command */ mblk_t *tw_data; /* save a copy of current request */ usb_opaque_t tw_curr_xfer_reqp; } uhci_trans_wrapper_t; /* set timeout flag so as to decrement timeout_cnt only once */ #define TW_TIMEOUT_FLAG 0x1000 /* Macro for changing the data toggle */ #define ADJ_DATA_TOGGLE(pp) \ (pp)->pp_data_toggle = ((pp)->pp_data_toggle == 0) ? 1 : 0; /* * Macros for setting/getting information */ #define Get_OpReg32(addr) ddi_get32(uhcip->uhci_regs_handle, \ (uint32_t *)&uhcip->uhci_regsp->addr) #define Get_OpReg16(addr) ddi_get16(uhcip->uhci_regs_handle, \ (uint16_t *)&uhcip->uhci_regsp->addr) #define Get_OpReg8(addr) ddi_get8(uhcip->uhci_regs_handle, \ (uchar_t *)&uhcip->uhci_regsp->addr) #define Set_OpReg32(addr, val) ddi_put32(uhcip->uhci_regs_handle, \ ((uint32_t *)&uhcip->uhci_regsp->addr), \ ((int32_t)(val))) #define Set_OpReg16(addr, val) ddi_put16(uhcip->uhci_regs_handle, \ ((uint16_t *)&uhcip->uhci_regsp->addr), \ ((int16_t)(val))) #define QH_PADDR(addr) \ ((uint32_t)(uhcip->uhci_qh_pool_cookie.dmac_address + \ (uint32_t)((uintptr_t)(addr) - \ (uintptr_t)uhcip->uhci_qh_pool_addr))) #define QH_VADDR(addr) \ ((void *)(((uint32_t)(addr) - \ (uint32_t)uhcip->uhci_qh_pool_cookie.dmac_address) + \ (char *)uhcip->uhci_qh_pool_addr)) #define TD_PADDR(addr) \ ((uint32_t)uhcip->uhci_td_pool_cookie.dmac_address + \ (uint32_t)((uintptr_t)(addr) - \ (uintptr_t)(uhcip->uhci_td_pool_addr))) #define BULKTD_PADDR(x, addr)\ ((uint32_t)((uintptr_t)(addr) - (uintptr_t)x->pool_addr) + \ (uint32_t)(x)->cookie.dmac_address) #define BULKTD_VADDR(x, addr)\ ((void *)(((uint32_t)(addr) - \ (uint32_t)(x)->cookie.dmac_address) + \ (char *)(x)->pool_addr)) #define ISOCTD_PADDR(x, addr)\ ((uint32_t)((uintptr_t)(addr) - (uintptr_t)(x)->pool_addr) + \ (uint32_t)(x)->cookie.dmac_address) #define TD_VADDR(addr) \ ((void *)(((uint32_t)(addr) - \ (uint32_t)uhcip->uhci_td_pool_cookie.dmac_address) + \ (char *)uhcip->uhci_td_pool_addr)) /* * If the terminate bit is cleared, there shouldn't be any * race condition problems. If the host controller reads the * bit before the driver has a chance to set the bit, the bit * will be reread on the next frame. */ #define UHCI_SET_TERMINATE_BIT(addr) \ SetQH32(uhcip, addr, GetQH32(uhcip, (addr)) | HC_END_OF_LIST) #define UHCI_CLEAR_TERMINATE_BIT(addr) \ SetQH32(uhcip, addr, GetQH32(uhcip, (addr)) & ~HC_END_OF_LIST) #define UHCI_XFER_TYPE(ept) ((ept)->bmAttributes & USB_EP_ATTR_MASK) #define UHCI_XFER_DIR(ept) ((ept)->bEndpointAddress & \ USB_EP_DIR_MASK) /* * for HCD based kstats: * uhci_intrs_stats_t structure */ typedef struct uhci_intrs_stats { struct kstat_named uhci_intrs_hc_halted; struct kstat_named uhci_intrs_hc_process_err; struct kstat_named uhci_intrs_host_sys_err; struct kstat_named uhci_intrs_resume_detected; struct kstat_named uhci_intrs_usb_err_intr; struct kstat_named uhci_intrs_usb_intr; struct kstat_named uhci_intrs_total; struct kstat_named uhci_intrs_not_claimed; } uhci_intrs_stats_t; /* * uhci defines for kstats */ #define UHCI_INTRS_STATS(uhci) ((uhci)->uhci_intrs_stats) #define UHCI_INTRS_STATS_DATA(uhci) \ ((uhci_intrs_stats_t *)UHCI_INTRS_STATS((uhci))->ks_data) #define UHCI_TOTAL_STATS(uhci) ((uhci)->uhci_total_stats) #define UHCI_TOTAL_STATS_DATA(uhci) (KSTAT_IO_PTR((uhci)->uhci_total_stats)) #define UHCI_CTRL_STATS(uhci) \ (KSTAT_IO_PTR((uhci)->uhci_count_stats[USB_EP_ATTR_CONTROL])) #define UHCI_BULK_STATS(uhci) \ (KSTAT_IO_PTR((uhci)->uhci_count_stats[USB_EP_ATTR_BULK])) #define UHCI_INTR_STATS(uhci) \ (KSTAT_IO_PTR((uhci)->uhci_count_stats[USB_EP_ATTR_INTR])) #define UHCI_ISOC_STATS(uhci) \ (KSTAT_IO_PTR((uhci)->uhci_count_stats[USB_EP_ATTR_ISOCH])) #define UHCI_UNIT(dev) (getminor((dev)) & ~HUBD_IS_ROOT_HUB) #define UHCI_PERIODIC_ENDPOINT(ept) \ (((((ept)->bmAttributes) & USB_EP_ATTR_MASK) == USB_EP_ATTR_INTR) || \ ((((ept)->bmAttributes) & USB_EP_ATTR_MASK) == USB_EP_ATTR_ISOCH)) /* * Debug printing Masks */ #define PRINT_MASK_ATTA 0x00000001 /* Attach time */ #define PRINT_MASK_LISTS 0x00000002 /* List management */ #define PRINT_MASK_ROOT_HUB 0x00000004 /* Root hub stuff */ #define PRINT_MASK_ALLOC 0x00000008 /* Alloc/dealloc descr */ #define PRINT_MASK_INTR 0x00000010 /* Interrupt handling */ #define PRINT_MASK_BW 0x00000020 /* Bandwidth */ #define PRINT_MASK_CBOPS 0x00000040 /* CB-OPS */ #define PRINT_MASK_HCDI 0x00000080 /* HCDI entry points */ #define PRINT_MASK_DUMPING 0x00000100 /* Dump HCD state info */ #define PRINT_MASK_ISOC 0x00000200 /* For ISOC xfers */ #define PRINT_MASK_ALL 0xFFFFFFFF #ifdef __cplusplus } #endif #endif /* _SYS_USB_UHCID_H */