/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _ISER_XFER_H #define _ISER_XFER_H #ifdef __cplusplus extern "C" { #endif #include #include #include #include /* * iser_xfer.h * Definitions and functions related to data transfer across the RC channel * This includes the posting of the Hello Message, the HelloReply Message, the * RC Send Message for the iSCSI Control PDU. */ /* * iser_private_data_s contains parameters relating to the iSER connection and * IB options support status. This data conforms to the 'iSER CM REQ Message * Private Data Format' from the Annex A12 - Support for iSCSI Extensions for * RDMA. */ #pragma pack(1) typedef struct iser_private_data_s { uint8_t ip_pvt[IBT_IP_HDR_PRIV_DATA_SZ]; #if defined(_BIT_FIELDS_LTOH) uint32_t rsvd1 :30, sie :1, zbvae :1; #elif defined(_BIT_FIELDS_HTOL) uint32_t zbvae :1, sie :1, rsvd1 :30; #else #error One of _BIT_FIELDS_LTOH or _BIT_FIELDS_HTOL must be defined #endif /* _BIT_FIELDS_LTOH */ uint8_t rsvd2[52]; } iser_private_data_t; /* iSER Message Opcodes */ #define ISER_OPCODE_CTRL_TYPE_PDU 1 #define ISER_OPCODE_HELLO_MSG 2 #define ISER_OPCODE_HELLOREPLY_MSG 3 /* * When ZBVA is not supported, both the initiator and the target shall use the * expanded iSER header as defined in the IB Spec Table 540 for iSCSI control- * type PDUs in the connection */ typedef struct iser_ctrl_hdr_s { #if defined(_BIT_FIELDS_LTOH) uint8_t rsvd1: 2, rsv_flag: 1, /* RStag valid bit */ wsv_flag: 1, /* WStag valid bit */ opcode: 4; /* iSER opcode */ uint8_t rsvd[3]; #elif defined(_BIT_FIELDS_HTOL) uint8_t opcode: 4, wsv_flag: 1, rsv_flag: 1, rsvd1: 2; uint8_t rsvd[3]; #else #error One of _BIT_FIELDS_LTOH or _BIT_FIELDS_HTOL must be defined #endif /* _BIT_FIELDS_LTOH */ uint32_t wstag; /* IB R-key for SCSI Write */ uint64_t wva; /* IB VA for SCSI Write */ uint32_t rstag; /* IB R-key for SCSI Read */ uint64_t rva; /* IB VA for SCSI Read */ } iser_ctrl_hdr_t; /* iSER Header Format for the iSER Hello Message */ typedef struct iser_hello_hdr_s { #if defined(_BIT_FIELDS_LTOH) uint8_t rsvd1 : 4, opcode : 4; uint8_t minver : 4, maxver : 4; #elif defined(_BIT_FIELDS_HTOL) uint8_t opcode : 4, rsvd1 : 4; uint8_t maxver : 4, minver : 4; #else #error One of _BIT_FIELDS_LTOH or _BIT_FIELDS_HTOL must be defined #endif /* _BIT_FIELDS_LTOH */ uint16_t iser_ird; uint32_t rsvd2[2]; } iser_hello_hdr_t; /* iSER Header Format for the iSER HelloReply Message */ typedef struct iser_helloreply_hdr_s { #if defined(_BIT_FIELDS_LTOH) uint8_t flag : 1, rsvd1 : 3, opcode : 4; uint8_t curver : 4, maxver : 4; #elif defined(_BIT_FIELDS_HTOL) uint8_t opcode : 4, rsvd1 : 3, flag : 1; uint8_t maxver : 4, curver : 4; #else #error One of _BIT_FIELDS_LTOH or _BIT_FIELDS_HTOL must be defined #endif /* _BIT_FIELDS_LTOH */ uint16_t iser_ord; uint32_t rsvd2[2]; } iser_helloreply_hdr_t; #pragma pack() struct iser_state_s; int iser_xfer_hello_msg(iser_chan_t *chan); int iser_xfer_helloreply_msg(iser_chan_t *chan); int iser_xfer_ctrlpdu(iser_chan_t *chan, idm_pdu_t *pdu); int iser_xfer_buf_to_ini(idm_task_t *idt, idm_buf_t *buf); int iser_xfer_buf_from_ini(idm_task_t *idt, idm_buf_t *buf); #ifdef __cplusplus } #endif #endif /* _ISER_XFER_H */