/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 *
 * Copyright (c) 2002-2006 Neterion, Inc.
 */

#ifdef XGE_DEBUG_FP
#include "xgehal-ring.h"
#endif

__HAL_STATIC_RING __HAL_INLINE_RING	xge_hal_ring_rxd_priv_t*
__hal_ring_rxd_priv(xge_hal_ring_t *ring, xge_hal_dtr_h	dtrh)
{

	xge_hal_ring_rxd_1_t *rxdp = (xge_hal_ring_rxd_1_t *)dtrh;
	xge_hal_ring_rxd_priv_t	*rxd_priv;

	xge_assert(rxdp);

#if	defined(XGE_HAL_USE_5B_MODE)
	xge_assert(ring);
	if (ring->buffer_mode == XGE_HAL_RING_QUEUE_BUFFER_MODE_5) {
		xge_hal_ring_rxd_5_t *rxdp_5 = (xge_hal_ring_rxd_5_t *)dtrh;
#if	defined	(XGE_OS_PLATFORM_64BIT)
		int	memblock_idx = rxdp_5->host_control	>> 16;
		int	i =	rxdp_5->host_control & 0xFFFF;
		rxd_priv = (xge_hal_ring_rxd_priv_t	*)
			((char*)ring->mempool->memblocks_priv_arr[memblock_idx]	+ ring->rxd_priv_size *	i);
#else
		/* 32-bit case */
		rxd_priv = (xge_hal_ring_rxd_priv_t	*)rxdp_5->host_control;
#endif
	} else
#endif
	{
		rxd_priv = (xge_hal_ring_rxd_priv_t	*)
				(ulong_t)rxdp->host_control;
	}

	xge_assert(rxd_priv);
	xge_assert(rxd_priv->dma_object);

	xge_assert(rxd_priv->dma_object->handle	== rxd_priv->dma_handle);

	xge_assert(rxd_priv->dma_object->addr +	rxd_priv->dma_offset ==
							rxd_priv->dma_addr);

	return rxd_priv;
}

__HAL_STATIC_RING __HAL_INLINE_RING	int
__hal_ring_block_memblock_idx(xge_hal_ring_block_t *block)
{
	   return (int)*((u64 *)(void *)((char *)block +
							   XGE_HAL_RING_MEMBLOCK_IDX_OFFSET));
}

__HAL_STATIC_RING __HAL_INLINE_RING	void
__hal_ring_block_memblock_idx_set(xge_hal_ring_block_t*block, int memblock_idx)
{
	   *((u64 *)(void *)((char *)block +
					   XGE_HAL_RING_MEMBLOCK_IDX_OFFSET)) =
					   memblock_idx;
}


__HAL_STATIC_RING __HAL_INLINE_RING	dma_addr_t
__hal_ring_block_next_pointer(xge_hal_ring_block_t *block)
{
	return (dma_addr_t)*((u64 *)(void *)((char *)block +
			XGE_HAL_RING_NEXT_BLOCK_POINTER_OFFSET));
}

__HAL_STATIC_RING __HAL_INLINE_RING	void
__hal_ring_block_next_pointer_set(xge_hal_ring_block_t *block,
			dma_addr_t dma_next)
{
	*((u64 *)(void *)((char	*)block	+
			  XGE_HAL_RING_NEXT_BLOCK_POINTER_OFFSET)) = dma_next;
}

/**
 * xge_hal_ring_dtr_private	- Get ULD private per-descriptor data.
 * @channelh: Channel handle.
 * @dtrh: Descriptor handle.
 *
 * Returns:	private	ULD	info associated	with the descriptor.
 * ULD requests	per-descriptor space via xge_hal_channel_open().
 *
 * See also: xge_hal_fifo_dtr_private().
 * Usage: See ex_rx_compl{}.
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void*
xge_hal_ring_dtr_private(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh)
{
	return (char *)__hal_ring_rxd_priv((xge_hal_ring_t *) channelh,	dtrh) +
					sizeof(xge_hal_ring_rxd_priv_t);
}

/**
 * xge_hal_ring_dtr_reserve	- Reserve ring descriptor.
 * @channelh: Channel handle.
 * @dtrh: Reserved descriptor. On success HAL fills	this "out" parameter
 *		  with a valid handle.
 *
 * Reserve Rx descriptor for the subsequent	filling-in (by upper layer
 * driver (ULD)) and posting on	the	corresponding channel (@channelh)
 * via xge_hal_ring_dtr_post().
 *
 * Returns:	XGE_HAL_OK - success.
 * XGE_HAL_INF_OUT_OF_DESCRIPTORS -	Currently no descriptors available.
 *
 * See also: xge_hal_fifo_dtr_reserve(), xge_hal_ring_dtr_free(),
 * xge_hal_fifo_dtr_reserve_sp(), xge_hal_status_e{}.
 * Usage: See ex_post_all_rx{}.
 */
__HAL_STATIC_RING __HAL_INLINE_RING	xge_hal_status_e
xge_hal_ring_dtr_reserve(xge_hal_channel_h channelh, xge_hal_dtr_h *dtrh)
{
	xge_hal_status_e status;
#if	defined(XGE_HAL_RX_MULTI_RESERVE_IRQ)
	unsigned long flags;
#endif

#if	defined(XGE_HAL_RX_MULTI_RESERVE)
	xge_os_spin_lock(&((xge_hal_channel_t*)channelh)->reserve_lock);
#elif defined(XGE_HAL_RX_MULTI_RESERVE_IRQ)
	xge_os_spin_lock_irq(&((xge_hal_channel_t*)channelh)->reserve_lock,
	flags);
#endif

	status = __hal_channel_dtr_alloc(channelh, dtrh);

#if	defined(XGE_HAL_RX_MULTI_RESERVE)
	xge_os_spin_unlock(&((xge_hal_channel_t*)channelh)->reserve_lock);
#elif defined(XGE_HAL_RX_MULTI_RESERVE_IRQ)
	xge_os_spin_unlock_irq(&((xge_hal_channel_t*)channelh)->reserve_lock,
				 flags);
#endif

	if (status == XGE_HAL_OK) {
		xge_hal_ring_rxd_1_t *rxdp = (xge_hal_ring_rxd_1_t *)*dtrh;

		/* instead of memset: reset	this RxD */
		rxdp->control_1	= rxdp->control_2 =	0;

#if	defined(XGE_OS_MEMORY_CHECK)
		__hal_ring_rxd_priv((xge_hal_ring_t *) channelh, rxdp)->allocated = 1;
#endif
	}

	return status;
}

/**
 * xge_hal_ring_dtr_info_get - Get extended	information	associated with
 * a completed receive descriptor for 1b mode.
 * @channelh: Channel handle.
 * @dtrh: Descriptor handle.
 * @ext_info: See xge_hal_dtr_info_t{}.	Returned by	HAL.
 *
 * Retrieve	extended information associated	with a completed receive descriptor.
 *
 * See also: xge_hal_dtr_info_t{}, xge_hal_ring_dtr_1b_get(),
 * xge_hal_ring_dtr_5b_get().
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void
xge_hal_ring_dtr_info_get(xge_hal_channel_h	channelh, xge_hal_dtr_h	dtrh,
			xge_hal_dtr_info_t *ext_info)
{
	/* cast	to 1-buffer	mode RxD: the code below relies	on the fact
	 * that	control_1 and control_2	are	formatted the same way.. */
	xge_hal_ring_rxd_1_t *rxdp = (xge_hal_ring_rxd_1_t *)dtrh;

	ext_info->l3_cksum = XGE_HAL_RXD_GET_L3_CKSUM(rxdp->control_1);
	ext_info->l4_cksum = XGE_HAL_RXD_GET_L4_CKSUM(rxdp->control_1);
		ext_info->frame	= XGE_HAL_RXD_GET_FRAME_TYPE(rxdp->control_1);
		ext_info->proto	= XGE_HAL_RXD_GET_FRAME_PROTO(rxdp->control_1);
	ext_info->vlan = XGE_HAL_RXD_GET_VLAN_TAG(rxdp->control_2);

	/* Herc	only, a	few	extra cycles imposed on	Xena and/or
	 * when	RTH	is not enabled.
	 * Alternatively, could	check
	 * xge_hal_device_check_id(), hldev->config.rth_en,	queue->rth_en */
	ext_info->rth_it_hit = XGE_HAL_RXD_GET_RTH_IT_HIT(rxdp->control_1);
	ext_info->rth_spdm_hit =
	XGE_HAL_RXD_GET_RTH_SPDM_HIT(rxdp->control_1);
	ext_info->rth_hash_type	=
	XGE_HAL_RXD_GET_RTH_HASH_TYPE(rxdp->control_1);
	ext_info->rth_value	= XGE_HAL_RXD_1_GET_RTH_VALUE(rxdp->control_2);
}

/**
 * xge_hal_ring_dtr_info_nb_get	- Get extended information associated
 * with	a completed	receive	descriptor for 3b or 5b
 * modes.
 * @channelh: Channel handle.
 * @dtrh: Descriptor handle.
 * @ext_info: See xge_hal_dtr_info_t{}.	Returned by	HAL.
 *
 * Retrieve	extended information associated	with a completed receive descriptor.
 *
 * See also: xge_hal_dtr_info_t{}, xge_hal_ring_dtr_1b_get(),
 *			 xge_hal_ring_dtr_5b_get().
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void
xge_hal_ring_dtr_info_nb_get(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh,
			xge_hal_dtr_info_t *ext_info)
{
	/* cast	to 1-buffer	mode RxD: the code below relies	on the fact
	 * that	control_1 and control_2	are	formatted the same way.. */
	xge_hal_ring_rxd_1_t *rxdp = (xge_hal_ring_rxd_1_t *)dtrh;

	ext_info->l3_cksum = XGE_HAL_RXD_GET_L3_CKSUM(rxdp->control_1);
	ext_info->l4_cksum = XGE_HAL_RXD_GET_L4_CKSUM(rxdp->control_1);
		ext_info->frame	= XGE_HAL_RXD_GET_FRAME_TYPE(rxdp->control_1);
		ext_info->proto	= XGE_HAL_RXD_GET_FRAME_PROTO(rxdp->control_1);
		ext_info->vlan = XGE_HAL_RXD_GET_VLAN_TAG(rxdp->control_2);
	/* Herc	only, a	few	extra cycles imposed on	Xena and/or
	 * when	RTH	is not enabled.	Same comment as	above. */
	ext_info->rth_it_hit = XGE_HAL_RXD_GET_RTH_IT_HIT(rxdp->control_1);
	ext_info->rth_spdm_hit =
	XGE_HAL_RXD_GET_RTH_SPDM_HIT(rxdp->control_1);
	ext_info->rth_hash_type	=
	XGE_HAL_RXD_GET_RTH_HASH_TYPE(rxdp->control_1);
	ext_info->rth_value	= (u32)rxdp->buffer0_ptr;
}

/**
 * xge_hal_ring_dtr_1b_set - Prepare 1-buffer-mode descriptor.
 * @dtrh: Descriptor handle.
 * @dma_pointer: DMA address of	a single receive buffer	this descriptor
 *				 should	carry. Note	that by	the	time
 *				 xge_hal_ring_dtr_1b_set
 *				 is	called,	the	receive	buffer should be already mapped
 *				 to	the	corresponding Xframe device.
 * @size: Size of the receive @dma_pointer buffer.
 *
 * Prepare 1-buffer-mode Rx	descriptor for posting
 * (via	xge_hal_ring_dtr_post()).
 *
 * This	inline helper-function does	not	return any parameters and always
 * succeeds.
 *
 * See also: xge_hal_ring_dtr_3b_set(),	xge_hal_ring_dtr_5b_set().
 * Usage: See ex_post_all_rx{}.
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void
xge_hal_ring_dtr_1b_set(xge_hal_dtr_h dtrh,	dma_addr_t dma_pointer,	int	size)
{
	xge_hal_ring_rxd_1_t *rxdp = (xge_hal_ring_rxd_1_t *)dtrh;
	rxdp->buffer0_ptr =	dma_pointer;
	rxdp->control_2	&= (~XGE_HAL_RXD_1_MASK_BUFFER0_SIZE);
	rxdp->control_2	|= XGE_HAL_RXD_1_SET_BUFFER0_SIZE(size);

	xge_debug_ring(XGE_TRACE, "xge_hal_ring_dtr_1b_set: rxdp %p control_2 %p buffer0_ptr %p",
    			(xge_hal_ring_rxd_1_t *)dtrh,
                rxdp->control_2,
    			rxdp->buffer0_ptr);
}

/**
 * xge_hal_ring_dtr_1b_get - Get data from the completed 1-buf
 * descriptor.
 * @channelh: Channel handle.
 * @dtrh: Descriptor handle.
 * @dma_pointer: DMA address of	a single receive buffer	_this_ descriptor
 *				 carries. Returned by HAL.
 * @pkt_length:	Length (in bytes) of the data in the buffer	pointed	by
 *				@dma_pointer. Returned by HAL.
 *
 * Retrieve	protocol data from the completed 1-buffer-mode Rx descriptor.
 * This	inline helper-function uses	completed descriptor to	populate receive
 * buffer pointer and other	"out" parameters. The function always succeeds.
 *
 * See also: xge_hal_ring_dtr_3b_get(),	xge_hal_ring_dtr_5b_get().
 * Usage: See ex_rx_compl{}.
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void
xge_hal_ring_dtr_1b_get(xge_hal_channel_h channelh,	xge_hal_dtr_h dtrh,
		dma_addr_t *dma_pointer, int *pkt_length)
{
	xge_hal_ring_rxd_1_t *rxdp = (xge_hal_ring_rxd_1_t *)dtrh;

	*pkt_length = XGE_HAL_RXD_1_GET_BUFFER0_SIZE(rxdp->control_2);
	*dma_pointer = rxdp->buffer0_ptr;

	((xge_hal_channel_t *)channelh)->poll_bytes += *pkt_length;
}

/**
 * xge_hal_ring_dtr_3b_set - Prepare 3-buffer-mode descriptor.
 * @dtrh: Descriptor handle.
 * @dma_pointers: Array	of DMA addresses. Contains exactly 3 receive buffers
 *				 _this_	descriptor should carry.
 *				 Note that by the time xge_hal_ring_dtr_3b_set
 *				 is	called,	the	receive	buffers	should be mapped
 *				 to	the	corresponding Xframe device.
 * @sizes: Array of	receive	buffer sizes. Contains 3 sizes:	one	size per
 *		   buffer from @dma_pointers.
 *
 * Prepare 3-buffer-mode Rx	descriptor for posting (via
 * xge_hal_ring_dtr_post()).
 * This	inline helper-function does	not	return any parameters and always
 * succeeds.
 *
 * See also: xge_hal_ring_dtr_1b_set(),	xge_hal_ring_dtr_5b_set().
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void
xge_hal_ring_dtr_3b_set(xge_hal_dtr_h dtrh,	dma_addr_t dma_pointers[],
			int	sizes[])
{
	xge_hal_ring_rxd_3_t *rxdp = (xge_hal_ring_rxd_3_t *)dtrh;
	rxdp->buffer0_ptr =	dma_pointers[0];
	rxdp->control_2	&= (~XGE_HAL_RXD_3_MASK_BUFFER0_SIZE);
	rxdp->control_2	|= XGE_HAL_RXD_3_SET_BUFFER0_SIZE(sizes[0]);
	rxdp->buffer1_ptr =	dma_pointers[1];
	rxdp->control_2	&= (~XGE_HAL_RXD_3_MASK_BUFFER1_SIZE);
	rxdp->control_2	|= XGE_HAL_RXD_3_SET_BUFFER1_SIZE(sizes[1]);
	rxdp->buffer2_ptr =	dma_pointers[2];
	rxdp->control_2	&= (~XGE_HAL_RXD_3_MASK_BUFFER2_SIZE);
	rxdp->control_2	|= XGE_HAL_RXD_3_SET_BUFFER2_SIZE(sizes[2]);
}

/**
 * xge_hal_ring_dtr_3b_get - Get data from the completed 3-buf
 * descriptor.
 * @channelh: Channel handle.
 * @dtrh: Descriptor handle.
 * @dma_pointers: DMA addresses	of the 3 receive buffers _this_	descriptor
 *				  carries. The first two buffers contain ethernet and
 *				  (IP +	transport) headers.	The	3rd	buffer contains	packet
 *				  data.
 *				  Returned by HAL.
 * @sizes: Array of	receive	buffer sizes. Contains 3 sizes:	one	size per
 * buffer from @dma_pointers. Returned by HAL.
 *
 * Retrieve	protocol data from the completed 3-buffer-mode Rx descriptor.
 * This	inline helper-function uses	completed descriptor to	populate receive
 * buffer pointer and other	"out" parameters. The function always succeeds.
 *
 * See also: xge_hal_ring_dtr_3b_get(),	xge_hal_ring_dtr_5b_get().
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void
xge_hal_ring_dtr_3b_get(xge_hal_channel_h channelh,	xge_hal_dtr_h dtrh,
		dma_addr_t dma_pointers[], int sizes[])
{
	xge_hal_ring_rxd_3_t *rxdp = (xge_hal_ring_rxd_3_t *)dtrh;

	dma_pointers[0]	= rxdp->buffer0_ptr;
	sizes[0] = XGE_HAL_RXD_3_GET_BUFFER0_SIZE(rxdp->control_2);

	dma_pointers[1]	= rxdp->buffer1_ptr;
	sizes[1] = XGE_HAL_RXD_3_GET_BUFFER1_SIZE(rxdp->control_2);

	dma_pointers[2]	= rxdp->buffer2_ptr;
	sizes[2] = XGE_HAL_RXD_3_GET_BUFFER2_SIZE(rxdp->control_2);

	((xge_hal_channel_t *)channelh)->poll_bytes += sizes[0] + sizes[1] +
		sizes[2];
}

/**
 * xge_hal_ring_dtr_5b_set - Prepare 5-buffer-mode descriptor.
 * @dtrh: Descriptor handle.
 * @dma_pointers: Array	of DMA addresses. Contains exactly 5 receive buffers
 *				 _this_	descriptor should carry.
 *				 Note that by the time xge_hal_ring_dtr_5b_set
 *				 is	called,	the	receive	buffers	should be mapped
 *				 to	the	corresponding Xframe device.
 * @sizes: Array of	receive	buffer sizes. Contains 5 sizes:	one	size per
 *		   buffer from @dma_pointers.
 *
 * Prepare 3-buffer-mode Rx	descriptor for posting (via
 * xge_hal_ring_dtr_post()).
 * This	inline helper-function does	not	return any parameters and always
 * succeeds.
 *
 * See also: xge_hal_ring_dtr_1b_set(),	xge_hal_ring_dtr_3b_set().
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void
xge_hal_ring_dtr_5b_set(xge_hal_dtr_h dtrh,	dma_addr_t dma_pointers[],
			int	sizes[])
{
	xge_hal_ring_rxd_5_t *rxdp = (xge_hal_ring_rxd_5_t *)dtrh;
	rxdp->buffer0_ptr =	dma_pointers[0];
	rxdp->control_2	&= (~XGE_HAL_RXD_5_MASK_BUFFER0_SIZE);
	rxdp->control_2	|= XGE_HAL_RXD_5_SET_BUFFER0_SIZE(sizes[0]);
	rxdp->buffer1_ptr =	dma_pointers[1];
	rxdp->control_2	&= (~XGE_HAL_RXD_5_MASK_BUFFER1_SIZE);
	rxdp->control_2	|= XGE_HAL_RXD_5_SET_BUFFER1_SIZE(sizes[1]);
	rxdp->buffer2_ptr =	dma_pointers[2];
	rxdp->control_2	&= (~XGE_HAL_RXD_5_MASK_BUFFER2_SIZE);
	rxdp->control_2	|= XGE_HAL_RXD_5_SET_BUFFER2_SIZE(sizes[2]);
	rxdp->buffer3_ptr =	dma_pointers[3];
	rxdp->control_3	&= (~XGE_HAL_RXD_5_MASK_BUFFER3_SIZE);
	rxdp->control_3	|= XGE_HAL_RXD_5_SET_BUFFER3_SIZE(sizes[3]);
	rxdp->buffer4_ptr =	dma_pointers[4];
	rxdp->control_3	&= (~XGE_HAL_RXD_5_MASK_BUFFER4_SIZE);
	rxdp->control_3 |= XGE_HAL_RXD_5_SET_BUFFER4_SIZE(sizes[4]);
}

/**
 * xge_hal_ring_dtr_5b_get - Get data from the completed 5-buf
 * descriptor.
 * @channelh: Channel handle.
 * @dtrh: Descriptor handle.
 * @dma_pointers: DMA addresses	of the 5 receive buffers _this_	descriptor
 *				  carries. The first 4 buffers contains	L2 (ethernet) through
 *				  L5 headers. The 5th buffer contain received (applicaion)
 *				  data.	Returned by	HAL.
 * @sizes: Array of	receive	buffer sizes. Contains 5 sizes:	one	size per
 * buffer from @dma_pointers. Returned by HAL.
 *
 * Retrieve	protocol data from the completed 5-buffer-mode Rx descriptor.
 * This	inline helper-function uses	completed descriptor to	populate receive
 * buffer pointer and other	"out" parameters. The function always succeeds.
 *
 * See also: xge_hal_ring_dtr_3b_get(),	xge_hal_ring_dtr_5b_get().
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void
xge_hal_ring_dtr_5b_get(xge_hal_channel_h channelh,	xge_hal_dtr_h dtrh,
		dma_addr_t dma_pointers[], int sizes[])
{
	xge_hal_ring_rxd_5_t *rxdp = (xge_hal_ring_rxd_5_t *)dtrh;

	dma_pointers[0]	= rxdp->buffer0_ptr;
	sizes[0] = XGE_HAL_RXD_5_GET_BUFFER0_SIZE(rxdp->control_2);

	dma_pointers[1]	= rxdp->buffer1_ptr;
	sizes[1] = XGE_HAL_RXD_5_GET_BUFFER1_SIZE(rxdp->control_2);

	dma_pointers[2]	= rxdp->buffer2_ptr;
	sizes[2] = XGE_HAL_RXD_5_GET_BUFFER2_SIZE(rxdp->control_2);

	dma_pointers[3]	= rxdp->buffer3_ptr;
	sizes[3] = XGE_HAL_RXD_5_GET_BUFFER3_SIZE(rxdp->control_3);

	dma_pointers[4]	= rxdp->buffer4_ptr;
	sizes[4] = XGE_HAL_RXD_5_GET_BUFFER4_SIZE(rxdp->control_3);

	((xge_hal_channel_t *)channelh)->poll_bytes += sizes[0] + sizes[1] +
		sizes[2] + sizes[3] + sizes[4];
}


/**
 * xge_hal_ring_dtr_pre_post - FIXME.
 * @channelh: Channel handle.
 * @dtrh: Descriptor handle.
 *
 * TBD
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void
xge_hal_ring_dtr_pre_post(xge_hal_channel_h	channelh, xge_hal_dtr_h	dtrh)
{
	xge_hal_ring_rxd_1_t *rxdp = (xge_hal_ring_rxd_1_t *)dtrh;
#if	defined(XGE_OS_DMA_REQUIRES_SYNC) && defined(XGE_HAL_DMA_DTR_STREAMING)
	xge_hal_ring_rxd_priv_t	*priv;
	xge_hal_ring_t *ring = (xge_hal_ring_t *)channelh;
#endif
#if	defined(XGE_HAL_RX_MULTI_POST_IRQ)
	unsigned long flags;
#endif

	rxdp->control_2	|= XGE_HAL_RXD_NOT_COMPLETED;

#ifdef XGE_DEBUG_ASSERT
		/* make	sure Xena overwrites the (illegal) t_code on completion	*/
		XGE_HAL_RXD_SET_T_CODE(rxdp->control_1,	XGE_HAL_RXD_T_CODE_UNUSED_C);
#endif

	xge_debug_ring(XGE_TRACE, "xge_hal_ring_dtr_pre_post: rxd 0x"XGE_OS_LLXFMT" posted %d  post_qid	%d",
			(unsigned long long)(ulong_t)dtrh,
            ((xge_hal_ring_t *)channelh)->channel.post_index,
			((xge_hal_ring_t *)channelh)->channel.post_qid);

#if	defined(XGE_HAL_RX_MULTI_POST)
	xge_os_spin_lock(&((xge_hal_channel_t*)channelh)->post_lock);
#elif defined(XGE_HAL_RX_MULTI_POST_IRQ)
	xge_os_spin_lock_irq(&((xge_hal_channel_t*)channelh)->post_lock,
	flags);
#endif

#if	defined(XGE_DEBUG_ASSERT) && defined(XGE_HAL_RING_ENFORCE_ORDER)
	{
		xge_hal_channel_t *channel = (xge_hal_channel_t	*)channelh;

		if (channel->post_index	!= 0) {
			xge_hal_dtr_h prev_dtrh;
			xge_hal_ring_rxd_priv_t	*rxdp_priv;

			rxdp_priv =	__hal_ring_rxd_priv((xge_hal_ring_t*)channel, rxdp);
			prev_dtrh =	channel->work_arr[channel->post_index -	1];

			if (prev_dtrh != NULL &&
				(rxdp_priv->dma_offset & (~0xFFF)) !=
						rxdp_priv->dma_offset) {
				xge_assert((char *)prev_dtrh +
					((xge_hal_ring_t*)channel)->rxd_size ==	dtrh);
			}
		}
	}
#endif

	__hal_channel_dtr_post(channelh, dtrh);

#if	defined(XGE_HAL_RX_MULTI_POST)
	xge_os_spin_unlock(&((xge_hal_channel_t*)channelh)->post_lock);
#elif defined(XGE_HAL_RX_MULTI_POST_IRQ)
	xge_os_spin_unlock_irq(&((xge_hal_channel_t*)channelh)->post_lock,
				   flags);
#endif
}


/**
 * xge_hal_ring_dtr_post_post -	FIXME.
 * @channelh: Channel handle.
 * @dtrh: Descriptor handle.
 *
 * TBD
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void
xge_hal_ring_dtr_post_post(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh)
{
	xge_hal_ring_rxd_1_t *rxdp = (xge_hal_ring_rxd_1_t *)dtrh;
	xge_hal_ring_t *ring = (xge_hal_ring_t *)channelh;
#if	defined(XGE_OS_DMA_REQUIRES_SYNC) && defined(XGE_HAL_DMA_DTR_STREAMING)
	xge_hal_ring_rxd_priv_t	*priv;
#endif
	/* do POST */
	rxdp->control_1	|= XGE_HAL_RXD_POSTED_4_XFRAME;

#if	defined(XGE_OS_DMA_REQUIRES_SYNC) && defined(XGE_HAL_DMA_DTR_STREAMING)
	priv = __hal_ring_rxd_priv(ring, rxdp);
	xge_os_dma_sync(ring->channel.pdev,
				  priv->dma_handle,	priv->dma_addr,
			  priv->dma_offset,	ring->rxd_size,
			  XGE_OS_DMA_DIR_TODEVICE);
#endif

	xge_debug_ring(XGE_TRACE, "xge_hal_ring_dtr_post_post: rxdp %p control_1 %p",
        		  (xge_hal_ring_rxd_1_t *)dtrh,
                  rxdp->control_1);

	if (ring->channel.usage_cnt	> 0)
		ring->channel.usage_cnt--;
}

/**
 * xge_hal_ring_dtr_post_post_wmb.
 * @channelh: Channel handle.
 * @dtrh: Descriptor handle.
 *
 * Similar as xge_hal_ring_dtr_post_post, but in addition it does memory barrier.
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void
xge_hal_ring_dtr_post_post_wmb(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh)
{
	xge_hal_ring_rxd_1_t *rxdp = (xge_hal_ring_rxd_1_t *)dtrh;
	xge_hal_ring_t *ring = (xge_hal_ring_t *)channelh;
#if	defined(XGE_OS_DMA_REQUIRES_SYNC) && defined(XGE_HAL_DMA_DTR_STREAMING)
	xge_hal_ring_rxd_priv_t	*priv;
#endif
    /* Do memory barrier before changing the ownership */
    xge_os_wmb();

	/* do POST */
	rxdp->control_1	|= XGE_HAL_RXD_POSTED_4_XFRAME;

#if	defined(XGE_OS_DMA_REQUIRES_SYNC) && defined(XGE_HAL_DMA_DTR_STREAMING)
	priv = __hal_ring_rxd_priv(ring, rxdp);
	xge_os_dma_sync(ring->channel.pdev,
				  priv->dma_handle,	priv->dma_addr,
			  priv->dma_offset,	ring->rxd_size,
			  XGE_OS_DMA_DIR_TODEVICE);
#endif

	if (ring->channel.usage_cnt	> 0)
		ring->channel.usage_cnt--;

	xge_debug_ring(XGE_TRACE, "xge_hal_ring_dtr_post_post_wmb: rxdp %p control_1 %p rxds_with_host %d",
        		  (xge_hal_ring_rxd_1_t *)dtrh,
                  rxdp->control_1, ring->channel.usage_cnt);

}

/**
 * xge_hal_ring_dtr_post - Post	descriptor on the ring channel.
 * @channelh: Channel handle.
 * @dtrh: Descriptor obtained via xge_hal_ring_dtr_reserve().
 *
 * Post	descriptor on the 'ring' type channel.
 * Prior to	posting	the	descriptor should be filled	in accordance with
 * Host/Xframe interface specification for a given service (LL,	etc.).
 *
 * See also: xge_hal_fifo_dtr_post_many(), xge_hal_fifo_dtr_post().
 * Usage: See ex_post_all_rx{}.
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void
xge_hal_ring_dtr_post(xge_hal_channel_h	channelh, xge_hal_dtr_h	dtrh)
{
	xge_hal_ring_dtr_pre_post(channelh,	dtrh);
	xge_hal_ring_dtr_post_post(channelh, dtrh);
}

/**
 * xge_hal_ring_dtr_next_completed - Get the _next_	completed
 * descriptor.
 * @channelh: Channel handle.
 * @dtrh: Descriptor handle. Returned by HAL.
 * @t_code:	Transfer code, as per Xframe User Guide,
 *			Receive	Descriptor Format. Returned	by HAL.
 *
 * Retrieve	the	_next_ completed descriptor.
 * HAL uses	channel	callback (*xge_hal_channel_callback_f) to notifiy
 * upper-layer driver (ULD)	of new completed descriptors. After	that
 * the ULD can use xge_hal_ring_dtr_next_completed to retrieve the rest
 * completions (the	very first completion is passed	by HAL via
 * xge_hal_channel_callback_f).
 *
 * Implementation-wise,	the	upper-layer	driver is free to call
 * xge_hal_ring_dtr_next_completed either immediately from inside the
 * channel callback, or	in a deferred fashion and separate (from HAL)
 * context.
 *
 * Non-zero	@t_code	means failure to fill-in receive buffer(s)
 * of the descriptor.
 * For instance, parity	error detected during the data transfer.
 * In this case	Xframe will	complete the descriptor	and	indicate
 * for the host	that the received data is not to be	used.
 * For details please refer	to Xframe User Guide.
 *
 * Returns:	XGE_HAL_OK - success.
 * XGE_HAL_INF_NO_MORE_COMPLETED_DESCRIPTORS - No completed	descriptors
 * are currently available for processing.
 *
 * See also: xge_hal_channel_callback_f{},
 * xge_hal_fifo_dtr_next_completed(), xge_hal_status_e{}.
 * Usage: See ex_rx_compl{}.
 */
__HAL_STATIC_RING __HAL_INLINE_RING	xge_hal_status_e
xge_hal_ring_dtr_next_completed(xge_hal_channel_h channelh,	xge_hal_dtr_h *dtrh,
				u8 *t_code)
{
	xge_hal_ring_rxd_1_t *rxdp;	/* doesn't matter 1, 3 or 5... */
	xge_hal_ring_t *ring = (xge_hal_ring_t *)channelh;
#if	defined(XGE_OS_DMA_REQUIRES_SYNC) && defined(XGE_HAL_DMA_DTR_STREAMING)
	xge_hal_ring_rxd_priv_t	*priv;
#endif

	__hal_channel_dtr_try_complete(ring, dtrh);
	rxdp = (xge_hal_ring_rxd_1_t *)*dtrh;
	if (rxdp ==	NULL) {
		return XGE_HAL_INF_NO_MORE_COMPLETED_DESCRIPTORS;
	}

#if	defined(XGE_OS_DMA_REQUIRES_SYNC) && defined(XGE_HAL_DMA_DTR_STREAMING)
	/* Note: 24	bytes at most means:
	 *	- Control_3	in case	of 5-buffer	mode
	 *	- Control_1	and	Control_2
	 *
	 * This	is the only	length needs to	be invalidated
	 * type	of channels.*/
	priv = __hal_ring_rxd_priv(ring, rxdp);
	xge_os_dma_sync(ring->channel.pdev,
				  priv->dma_handle,	priv->dma_addr,
			  priv->dma_offset,	24,
			  XGE_OS_DMA_DIR_FROMDEVICE);
#endif

	/* check whether it	is not the end */
	if (!(rxdp->control_2 &	XGE_HAL_RXD_NOT_COMPLETED) &&
		!(rxdp->control_1 &	XGE_HAL_RXD_POSTED_4_XFRAME)) {
#ifndef	XGE_HAL_IRQ_POLLING
		if (++ring->cmpl_cnt > ring->indicate_max_pkts)	{
			/* reset it. since we don't	want to	return
			 * garbage to the ULD */
			*dtrh =	0;
			return XGE_HAL_COMPLETIONS_REMAIN;
		}
#endif

#ifdef XGE_DEBUG_ASSERT
#if	defined(XGE_HAL_USE_5B_MODE)
#if	!defined(XGE_OS_PLATFORM_64BIT)
		if (ring->buffer_mode == XGE_HAL_RING_QUEUE_BUFFER_MODE_5) {
			xge_assert(((xge_hal_ring_rxd_5_t *)
					rxdp)->host_control!=0);
		}
#endif

#else
		xge_assert(rxdp->host_control!=0);
#endif
#endif

		__hal_channel_dtr_complete(ring);

		*t_code	= (u8)XGE_HAL_RXD_GET_T_CODE(rxdp->control_1);

				/* see XGE_HAL_SET_RXD_T_CODE()	above..	*/
		xge_assert(*t_code != XGE_HAL_RXD_T_CODE_UNUSED_C);

		xge_debug_ring(XGE_TRACE,
			"compl_index %d	post_qid %d	t_code %d rxd 0x"XGE_OS_LLXFMT,
			((xge_hal_channel_t*)ring)->compl_index,
			((xge_hal_channel_t*)ring)->post_qid, *t_code,
			(unsigned long long)(ulong_t)rxdp);

		ring->channel.usage_cnt++;
		if (ring->channel.stats.usage_max <	ring->channel.usage_cnt)
			ring->channel.stats.usage_max =	ring->channel.usage_cnt;

		return XGE_HAL_OK;
	}

	/* reset it. since we don't	want to	return
	 * garbage to the ULD */
	*dtrh =	0;
	return XGE_HAL_INF_NO_MORE_COMPLETED_DESCRIPTORS;
}

/**
 * xge_hal_ring_dtr_free - Free	descriptor.
 * @channelh: Channel handle.
 * @dtrh: Descriptor handle.
 *
 * Free	the	reserved descriptor. This operation	is "symmetrical" to
 * xge_hal_ring_dtr_reserve. The "free-ing"	completes the descriptor's
 * lifecycle.
 *
 * After free-ing (see xge_hal_ring_dtr_free())	the	descriptor again can
 * be:
 *
 * - reserved (xge_hal_ring_dtr_reserve);
 *
 * - posted	(xge_hal_ring_dtr_post);
 *
 * - completed (xge_hal_ring_dtr_next_completed);
 *
 * - and recycled again	(xge_hal_ring_dtr_free).
 *
 * For alternative state transitions and more details please refer to
 * the design doc.
 *
 * See also: xge_hal_ring_dtr_reserve(), xge_hal_fifo_dtr_free().
 * Usage: See ex_rx_compl{}.
 */
__HAL_STATIC_RING __HAL_INLINE_RING	void
xge_hal_ring_dtr_free(xge_hal_channel_h	channelh, xge_hal_dtr_h	dtrh)
{
#if	defined(XGE_HAL_RX_MULTI_FREE_IRQ)
	unsigned long flags;
#endif

#if	defined(XGE_HAL_RX_MULTI_FREE)
	xge_os_spin_lock(&((xge_hal_channel_t*)channelh)->free_lock);
#elif defined(XGE_HAL_RX_MULTI_FREE_IRQ)
	xge_os_spin_lock_irq(&((xge_hal_channel_t*)channelh)->free_lock,
	flags);
#endif

	__hal_channel_dtr_free(channelh, dtrh);
#if	defined(XGE_OS_MEMORY_CHECK)
	__hal_ring_rxd_priv((xge_hal_ring_t * ) channelh, dtrh)->allocated = 0;
#endif

#if	defined(XGE_HAL_RX_MULTI_FREE)
	xge_os_spin_unlock(&((xge_hal_channel_t*)channelh)->free_lock);
#elif defined(XGE_HAL_RX_MULTI_FREE_IRQ)
	xge_os_spin_unlock_irq(&((xge_hal_channel_t*)channelh)->free_lock,
	flags);
#endif
}

/**
 * xge_hal_ring_is_next_dtr_completed -	Check if the next dtr is completed
 * @channelh: Channel handle.
 *
 * Checks if the the _next_	completed descriptor is	in host	memory
 *
 * Returns:	XGE_HAL_OK - success.
 * XGE_HAL_INF_NO_MORE_COMPLETED_DESCRIPTORS - No completed	descriptors
 * are currently available for processing.
 */
__HAL_STATIC_RING __HAL_INLINE_RING	xge_hal_status_e
xge_hal_ring_is_next_dtr_completed(xge_hal_channel_h channelh)
{
	xge_hal_ring_rxd_1_t *rxdp;	/* doesn't matter 1, 3 or 5... */
	xge_hal_ring_t *ring = (xge_hal_ring_t *)channelh;
	xge_hal_dtr_h dtrh;

	__hal_channel_dtr_try_complete(ring, &dtrh);
	rxdp = (xge_hal_ring_rxd_1_t *)dtrh;
	if (rxdp ==	NULL) {
		return XGE_HAL_INF_NO_MORE_COMPLETED_DESCRIPTORS;
	}

	/* check whether it	is not the end */
	if (!(rxdp->control_2 &	XGE_HAL_RXD_NOT_COMPLETED) &&
		!(rxdp->control_1 &	XGE_HAL_RXD_POSTED_4_XFRAME)) {

#ifdef XGE_DEBUG_ASSERT
#if	defined(XGE_HAL_USE_5B_MODE)
#if	!defined(XGE_OS_PLATFORM_64BIT)
		if (ring->buffer_mode == XGE_HAL_RING_QUEUE_BUFFER_MODE_5) {
			xge_assert(((xge_hal_ring_rxd_5_t *)
					rxdp)->host_control!=0);
		}
#endif

#else
		xge_assert(rxdp->host_control!=0);
#endif
#endif
		return XGE_HAL_OK;
	}

	return XGE_HAL_INF_NO_MORE_COMPLETED_DESCRIPTORS;
}