/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _NPI_VIR_H #define _NPI_VIR_H #ifdef __cplusplus extern "C" { #endif #include #include /* * Virtualization and Logical devices NPI error codes */ #define FUNCID_INVALID PORT_INVALID #define VIR_ERR_ST (VIR_BLK_ID << NPI_BLOCK_ID_SHIFT) #define VIR_ID_SHIFT(n) (n << NPI_PORT_CHAN_SHIFT) #define VIR_HW_BUSY (NPI_BK_HW_ERROR_START | 0x1) #define VIR_TAS_BUSY (NPI_BK_ERROR_START | 0x1) #define VIR_TAS_NOTREAD (NPI_BK_ERROR_START | 0x2) #define VIR_SR_RESET (NPI_BK_ERROR_START | 0x3) #define VIR_SR_FREE (NPI_BK_ERROR_START | 0x4) #define VIR_SR_BUSY (NPI_BK_ERROR_START | 0x5) #define VIR_SR_INVALID (NPI_BK_ERROR_START | 0x6) #define VIR_SR_NOTOWNER (NPI_BK_ERROR_START | 0x7) #define VIR_SR_INITIALIZED (NPI_BK_ERROR_START | 0x8) #define VIR_MPC_DENY (NPI_BK_ERROR_START | 0x10) #define VIR_BD_FUNC_INVALID (NPI_BK_ERROR_START | 0x20) #define VIR_BD_REG_INVALID (NPI_BK_ERROR_START | 0x21) #define VIR_BD_ID_INVALID (NPI_BK_ERROR_START | 0x22) #define VIR_BD_TXDMA_INVALID (NPI_BK_ERROR_START | 0x23) #define VIR_BD_RXDMA_INVALID (NPI_BK_ERROR_START | 0x24) #define VIR_LD_INVALID (NPI_BK_ERROR_START | 0x30) #define VIR_LDG_INVALID (NPI_BK_ERROR_START | 0x31) #define VIR_LDSV_INVALID (NPI_BK_ERROR_START | 0x32) #define VIR_INTM_TM_INVALID (NPI_BK_ERROR_START | 0x33) #define VIR_TM_RES_INVALID (NPI_BK_ERROR_START | 0x34) #define VIR_SID_VEC_INVALID (NPI_BK_ERROR_START | 0x35) #define NPI_VIR_OCODE_INVALID(n) (VIR_ID_SHIFT(n) | VIR_ERR_ST | OPCODE_INVALID) #define NPI_VIR_FUNC_INVALID(n) (VIR_ID_SHIFT(n) | VIR_ERR_ST | FUNCID_INVALID) #define NPI_VIR_CN_INVALID(n) (VIR_ID_SHIFT(n) | VIR_ERR_ST | CHANNEL_INVALID) /* * Errors codes of shared register functions. */ #define NPI_VIR_TAS_BUSY(n) (VIR_ID_SHIFT(n) | VIR_ERR_ST | VIR_TAS_BUSY) #define NPI_VIR_TAS_NOTREAD(n) (VIR_ID_SHIFT(n) | VIR_ERR_ST | VIR_TAS_NOTREAD) #define NPI_VIR_SR_RESET(n) (VIR_ID_SHIFT(n) | VIR_ERR_ST | VIR_SR_RESET) #define NPI_VIR_SR_FREE(n) (VIR_ID_SHIFT(n) | VIR_ERR_ST | VIR_SR_FREE) #define NPI_VIR_SR_BUSY(n) (VIR_ID_SHIFT(n) | VIR_ERR_ST | VIR_SR_BUSY) #define NPI_VIR_SR_INVALID(n) (VIR_ID_SHIFT(n) | VIR_ERR_ST | VIR_SR_INVALID) #define NPI_VIR_SR_NOTOWNER(n) (VIR_ID_SHIFT(n) | VIR_ERR_ST | VIR_SR_NOTOWNER) #define NPI_VIR_SR_INITIALIZED(n) (VIR_ID_SHIFT(n) | \ VIR_ERR_ST | VIR_SR_INITIALIZED) /* * Error codes of muti-partition control register functions. */ #define NPI_VIR_MPC_DENY (VIR_ERR_ST | VIR_MPU_DENY) /* * Error codes of DMA binding functions. */ #define NPI_VIR_BD_FUNC_INVALID(n) (VIR_ID_SHIFT(n) | \ VIR_ERR_ST | VIR_BD_FUNC_INVALID) #define NPI_VIR_BD_REG_INVALID(n) (VIR_ID_SHIFT(n) | \ VIR_ERR_ST | VIR_BD_REG_INVALID) #define NPI_VIR_BD_ID_INVALID(n) (VIR_ID_SHIFT(n) | \ VIR_ERR_ST | VIR_BD_ID_INVALID) #define NPI_VIR_BD_TXDMA_INVALID(n) (VIR_ID_SHIFT(n) | \ VIR_ERR_ST | VIR_BD_TXDMA_INVALID) #define NPI_VIR_BD_RXDMA_INVALID(n) (VIR_ID_SHIFT(n) | \ VIR_ERR_ST | VIR_BD_RXDMA_INVALID) /* * Error codes of logical devices and groups functions. */ #define NPI_VIR_LD_INVALID(n) (VIR_ID_SHIFT(n) | VIR_ERR_ST | VIR_LD_INVALID) #define NPI_VIR_LDG_INVALID(n) (VIR_ID_SHIFT(n) | VIR_ERR_ST | VIR_LDG_INVALID) #define NPI_VIR_LDSV_INVALID(n) (VIR_ID_SHIFT(n) | \ VIR_ERR_ST | VIR_LDSV_INVALID) #define NPI_VIR_INTM_TM_INVALID(n) (VIR_ID_SHIFT(n) | \ VIR_ERR_ST | VIR_INTM_TM_INVALID) #define NPI_VIR_TM_RES_INVALID (VIR_ERR_ST | VIR_TM_RES_INVALID) #define NPI_VIR_SID_VEC_INVALID(n) (VIR_ID_SHIFT(n) | \ VIR_ERR_ST | VIR_TM_RES_INVALID) /* * Bit definition ([15:0] of the shared register * used by the driver as locking mechanism. * [1:0] lock state (RESET, FREE, BUSY) * [3:2] function ID (owner) * [11:4] Implementation specific states * [15:12] Individual function state */ #define NPI_DEV_SR_LOCK_ST_RESET 0 #define NPI_DEV_SR_LOCK_ST_FREE 1 #define NPI_DEV_SR_LOCK_ST_BUSY 2 #define NPI_DEV_SR_LOCK_ST_SHIFT 0 #define NPI_DEV_SR_LOCK_ST_MASK 0x03 #define NPI_DEV_SR_LOCK_FID_SHIFT 2 #define NPI_DEV_SR_LOCK_FID_MASK 0x0C #define NPI_DEV_SR_IMPL_ST_SHIFT 4 #define NPI_DEV_SR_IMPL_ST_MASK 0xfff0 #define NPI_GET_LOCK_OWNER(sr) ((sr & NPI_DEV_SR_LOCK_FID_MASK) \ >> NPI_DEV_SR_LOCK_FID_SHIFT) #define NPI_GET_LOCK_ST(sr) (sr & NPI_DEV_SR_LOCK_ST_MASK) #define NPI_GET_LOCK_IMPL_ST(sr) ((sr & NPI_DEV_SR_IMPL_ST_MASK) \ >> NPI_DEV_SR_IMPL_ST_SHIFT) /* * DMA channel binding definitions. */ #define DMA_BIND_VADDR_VALIDATE(fn, rn, id, status) \ { \ status = NPI_SUCCESS; \ if (!TXDMA_FUNC_VALID(fn)) { \ status = (NPI_FAILURE | NPI_VIR_BD_FUNC_INVALID(fn)); \ } else if (!SUBREGION_VALID(rn)) { \ status = (NPI_FAILURE | NPI_VIR_BD_REG_INVALID(rn)); \ } else if (!VIR_PAGE_INDEX_VALID(id)) { \ status = (NPI_FAILURE | NPI_VIR_BD_ID_INVALID(id)); \ } \ } #define DMA_BIND_TX_VALIDATE(n, status) \ { \ status = NPI_SUCCESS; \ if (!TXDMA_CHANNEL_VALID(n)) { \ status = (NPI_FAILURE | NPI_VIR_BD_TXDMA_INVALID(n)); \ } \ } #define DMA_BIND_RX_VALIDATE(n, status) \ { \ status = NPI_SUCCESS; \ if (!VRXDMA_CHANNEL_VALID(n)) { \ status = (NPI_FAILURE | NPI_VIR_BD_RXDMA_INVALID(n)); \ } \ } #define DMA_BIND_STEP 8 #define DMA_BIND_REG_OFFSET(fn, rn, id) (DMA_BIND_STEP * \ (fn * 2 * VIR_PAGE_INDEX_MAX + \ rn * VIR_PAGE_INDEX_MAX) + id) /* * NPI defined data structure to program the DMA binding register. */ typedef struct _fzc_dma_bind { uint8_t function_id; /* 0 to 3 */ uint8_t sub_vir_region; /* 0 or 1 */ uint8_t vir_index; /* 0 to 7 */ boolean_t tx_bind; /* set 1 to bind */ uint8_t tx_channel; /* hardware channel number (0 - 23) */ boolean_t rx_bind; /* set 1 to bind */ uint8_t rx_channel; /* hardware channel number (0 - 15) */ } fzc_dma_bind_t, *p_fzc_dma_bind; /* * Logical device definitions. */ #define LD_NUM_STEP 8 #define LD_NUM_OFFSET(ld) (ld * LDG_NUM_STEP) #define LDG_NUM_STEP 8 #define LDG_NUM_OFFSET(ldg) (ldg * LDG_NUM_STEP) #define LDGNUM_OFFSET(ldg) (ldg * LDG_NUM_STEP) #define LDSV_STEP 8192 #define LDSVG_OFFSET(ldg) (ldg * LDSV_STEP) #define LDSV_OFFSET(ldv) (ldv * LDSV_STEP) #define LDSV_OFFSET_MASK(ld) \ (((ld < NXGE_MAC_LD_START) ? \ (LD_IM0_REG + LDSV_OFFSET(ld)) : \ (LD_IM1_REG + LDSV_OFFSET((ld - NXGE_MAC_LD_START))))); \ #define LDG_SID_STEP 8 #define LDG_SID_OFFSET(ldg) (ldg * LDG_SID_STEP) typedef enum { LDF0, LDF1 } ldf_type_t; typedef enum { VECTOR0, VECTOR1, VECTOR2 } ldsv_type_t; /* * Definitions for the system interrupt data. */ typedef struct _fzc_sid { boolean_t niu; uint8_t ldg; uint8_t func; uint8_t vector; } fzc_sid_t, *p_fzc_sid_t; /* * Virtualization and Interrupt Prototypes. */ /* * npi_dev_func_sr_init(): * This function is called to initialize the device function * shared register (set the software implementation lock * state to FREE). * Parameters: * handle - NPI handle * Return: * NPI_SUCCESS - If initialization is complete successfully. * (set sr bits to free). * Error: * NPI_FAILURE * VIR_TAS_BUSY */ npi_status_t npi_dev_func_sr_init(npi_handle_t); /* * npi_dev_func_sr_lock_enter(): * This function is called to lock the function shared register * by setting the lock state to busy. * Parameters: * handle - NPI handle * Return: * NPI_SUCCESS - If the function id can own the lock. * * Error: * NPI_FAILURE * VIR_SR_RESET * VIR_SR_BUSY * VIR_SR_INVALID * VIR_TAS_BUSY */ npi_status_t npi_dev_func_sr_lock_enter(npi_handle_t); /* * npi_dev_func_sr_lock_free(): * This function is called to free the function shared register * by setting the lock state to free. * Parameters: * handle - NPI handle * Return: * NPI_SUCCESS - If the function id can free the lock. * * Error: * NPI_FAILURE * VIR_SR_NOTOWNER * VIR_TAS_NOTREAD */ npi_status_t npi_dev_func_sr_lock_free(npi_handle_t); /* * npi_dev_func_sr_funcid_get(): * This function is called to get the caller's function ID. * (based on address bits [25:26] on read access. * (After read, the TAS bit is always set to 1. Software needs * to write 0 to clear.) This function will write 0 to clear * the TAS bit if we own it. * Parameters: * handle - NPI handle * funcid_p - pointer to store the function id. * Return: * NPI_SUCCESS - If get function id is complete successfully. * * Error: */ npi_status_t npi_dev_func_sr_funcid_get(npi_handle_t, uint8_t *); /* * npi_dev_func_sr_sr_raw_get(): * This function is called to get the shared register value. * (After read, the TAS bit is always set to 1. Software needs * to write 0 to clear if we own it.) * * Parameters: * handle - NPI handle * sr_p - pointer to store the shared value of this register. * * Return: * NPI_SUCCESS - If shared value get is complete successfully. * * Error: */ npi_status_t npi_dev_func_sr_sr_raw_get(npi_handle_t, uint16_t *); /* * npi_dev_func_sr_sr_get(): * This function is called to get the shared register value. * (After read, the TAS bit is always set to 1. Software needs * to write 0 to clear if we own it.) * * Parameters: * handle - NPI handle * sr_p - pointer to store the shared value of this register. * . this will get only non-lock, non-function id portion * . of the register * * * Return: * NPI_SUCCESS - If shared value get is complete successfully. * * Error: */ npi_status_t npi_dev_func_sr_sr_get(npi_handle_t, uint16_t *); /* * npi_dev_func_sr_sr_get_set_clear(): * This function is called to set the shared register value. * (Shared register must be read first. If tas bit is 0, then * it implies that the software can proceed to set). After * setting, tas bit will be cleared. * Parameters: * handle - NPI handle * impl_sr - shared value to set (only the 8 bit * implementation specific state info). * * Return: * NPI_SUCCESS - If shared value is set successfully. * * Error: * NPI_FAILURE * VIR_TAS_BUSY */ npi_status_t npi_dev_func_sr_sr_get_set_clear(npi_handle_t, uint16_t); /* * npi_dev_func_sr_sr_set_only(): * This function is called to only set the shared register value. * Parameters: * handle - NPI handle * impl_sr - shared value to set. * * Return: * NPI_SUCCESS - If shared value is set successfully. * * Error: * NPI_FAILURE * VIR_TAS_BUSY */ npi_status_t npi_dev_func_sr_sr_set_only(npi_handle_t, uint16_t); /* * npi_dev_func_sr_busy(): * This function is called to see if we can own the device. * It will not reset the tas bit. * Parameters: * handle - NPI handle * busy_p - pointer to store busy flag. * (B_TRUE: device is in use, B_FALSE: free). * Return: * NPI_SUCCESS - If tas bit is read successfully. * Error: */ npi_status_t npi_dev_func_sr_busy(npi_handle_t, boolean_t *); /* * npi_dev_func_sr_tas_get(): * This function is called to get the tas bit * (after read, this bit is always set to 1, software write 0 * to clear it). * * Parameters: * handle - NPI handle * tas_p - pointer to store the tas value * * Return: * NPI_SUCCESS - If tas value get is complete successfully. * Error: */ npi_status_t npi_dev_func_sr_tas_get(npi_handle_t, uint8_t *); /* * npi_fzc_mpc_set(): * This function is called to enable the write access * to FZC region to function zero. * Parameters: * handle - NPI handle * Return: * NPI_SUCCESS - * Error: */ npi_status_t npi_fzc_mpc_set(npi_handle_t, boolean_t); /* * npi_fzc_mpc_get(): * This function is called to get the access mode. * Parameters: * handle - NPI handle * Return: * NPI_SUCCESS - * */ npi_status_t npi_fzc_mpc_get(npi_handle_t, boolean_t *); /* * npi_fzc_dma_bind_set(): * This function is called to set DMA binding register. * Parameters: * handle - NPI handle * dma_bind - NPI defined data structure that * contains the tx/rx channel binding info. * to set. * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE * */ npi_status_t npi_fzc_dma_bind_set(npi_handle_t, fzc_dma_bind_t); /* * npi_fzc_dma_bind_get(): * This function is called to get a DMA binding register. * Parameters: * handle - NPI handle * dma_bind - NPI defined data structure that * contains the tx/rx channel binding info. * value - Where to put the register value. * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE * */ npi_status_t npi_fzc_dma_bind_get(npi_handle_t, fzc_dma_bind_t, uint64_t *); /* * npi_fzc_ldg_num_set(): * This function is called to set up a logical group number that * a logical device belongs to. * Parameters: * handle - NPI handle * ld - logical device number (0 - 68) * ldg - logical device group number (0 - 63) * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE * */ npi_status_t npi_fzc_ldg_num_set(npi_handle_t, uint8_t, uint8_t); /* * npi_fzc_ldg_num_get(): * This function is called to get the logical device group that * a logical device belongs to. * Parameters: * handle - NPI handle * ld - logical device number (0 - 68) * *ldg_p - pointer to store its group number. * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_fzc_ldg_num_get(npi_handle_t, uint8_t, uint8_t *); npi_status_t npi_ldsv_ldfs_get(npi_handle_t, uint8_t, uint64_t *, uint64_t *, uint64_t *); /* * npi_ldsv_get(): * This function is called to get device state vectors. * Parameters: * handle - NPI handle * ldg - logical device group (0 - 63) * ldf_type - either LDF0 (0) or LDF1 (1) * vector - vector type (0, 1 or 2) * *ldf_p - pointer to store its flag bits. * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_ldsv_get(npi_handle_t, uint8_t, ldsv_type_t, uint64_t *); /* * npi_ldsv_ld_get(): * This function is called to get the flag bit value of a device. * Parameters: * handle - NPI handle * ldg - logical device group (0 - 63) * ld - logical device (0 - 68) * ldf_type - either LDF0 (0) or LDF1 (1) * vector - vector type (0, 1 or 2) * *ldf_p - pointer to store its flag bits. * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_ldsv_ld_get(npi_handle_t, uint8_t, uint8_t, ldsv_type_t, ldf_type_t, boolean_t *); /* * npi_ldsv_ld_ldf0_get(): * This function is called to get the ldf0 bit value of a device. * Parameters: * handle - NPI handle * ldg - logical device group (0 - 63) * ld - logical device (0 - 68) * *ldf_p - pointer to store its flag bits. * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_ldsv_ld_ldf0_get(npi_handle_t, uint8_t, uint8_t, boolean_t *); /* * npi_ldsv_ld_ldf1_get(): * This function is called to get the ldf1 bit value of a device. * Parameters: * handle - NPI handle * ldg - logical device group (0 - 63) * ld - logical device (0 - 68) * *ldf_p - pointer to store its flag bits. * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_ldsv_ld_ldf1_get(npi_handle_t, uint8_t, uint8_t, boolean_t *); /* * npi_intr_mask_set(): * This function is called to select the mask bits for both ldf0 and ldf1. * Parameters: * handle - NPI handle * ld - logical device (0 - 68) * ldf_mask - mask value to set (both ldf0 and ldf1). * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_intr_mask_set(npi_handle_t, uint8_t, uint8_t); /* * npi_intr_mask_get(): * This function is called to get the mask bits. * Parameters: * handle - NPI handle * ld - logical device (0 - 68) * ldf_mask - pointer to store mask bits info. * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_intr_mask_get(npi_handle_t, uint8_t, uint8_t *); /* * npi_intr_ldg_mgmt_set(): * This function is called to set interrupt timer and arm bit. * Parameters: * handle - NPI handle * ldg - logical device group (0 - 63) * arm - B_TRUE (arm) B_FALSE (disable) * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_intr_ldg_mgmt_set(npi_handle_t, uint8_t, boolean_t, uint8_t); /* * npi_intr_ldg_mgmt_timer_get(): * This function is called to get the timer counter * Parameters: * handle - NPI handle * ldg - logical device group (0 - 63) * timer_p - pointer to store the timer counter. * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_intr_ldg_mgmt_timer_get(npi_handle_t, uint8_t, uint8_t *); /* * npi_intr_ldg_mgmt_arm(): * This function is called to arm the group. * Parameters: * handle - NPI handle * ldg - logical device group (0 - 63) * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_intr_ldg_mgmt_arm(npi_handle_t, uint8_t); /* * npi_fzc_ldg_timer_res_set(): * This function is called to set the timer resolution. * Parameters: * handle - NPI handle * res - timer resolution (# of system clocks) * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_fzc_ldg_timer_res_set(npi_handle_t, uint32_t); /* * npi_fzc_ldg_timer_res_get(): * This function is called to get the timer resolution. * Parameters: * handle - NPI handle * res_p - pointer to store the timer resolution. * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_fzc_ldg_timer_res_get(npi_handle_t, uint8_t *); /* * npi_fzc_sid_set(): * This function is called to set the system interrupt data. * Parameters: * handle - NPI handle * ldg - logical group (0 - 63) * sid - NPI defined data to set * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_fzc_sid_set(npi_handle_t, fzc_sid_t); /* * npi_fzc_sid_get(): * This function is called to get the system interrupt data. * Parameters: * handle - NPI handle * ldg - logical group (0 - 63) * sid_p - NPI defined data to get * Return: * NPI_SUCCESS - * Error: * NPI_FAILURE */ npi_status_t npi_fzc_sid_get(npi_handle_t, p_fzc_sid_t); npi_status_t npi_fzc_sys_err_mask_set(npi_handle_t, uint64_t); npi_status_t npi_fzc_sys_err_stat_get(npi_handle_t, p_sys_err_stat_t); npi_status_t npi_vir_dump_pio_fzc_regs_one(npi_handle_t); npi_status_t npi_vir_dump_ldgnum(npi_handle_t); npi_status_t npi_vir_dump_ldsv(npi_handle_t); npi_status_t npi_vir_dump_imask0(npi_handle_t); npi_status_t npi_vir_dump_sid(npi_handle_t); #ifdef __cplusplus } #endif #endif /* _NPI_VIR_H */