/* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Copyright 2016 Hans Rosenfeld */ /* * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * IEEE 802.11 protocol support */ #include "net80211_impl.h" /* tunables */ #define AGGRESSIVE_MODE_SWITCH_HYSTERESIS 3 /* pkts / 100ms */ #define HIGH_PRI_SWITCH_THRESH 10 /* pkts / 100ms */ #define IEEE80211_RATE2MBS(r) (((r) & IEEE80211_RATE_VAL) / 2) const char *ieee80211_mgt_subtype_name[] = { "assoc_req", "assoc_resp", "reassoc_req", "reassoc_resp", "probe_req", "probe_resp", "reserved#6", "reserved#7", "beacon", "atim", "disassoc", "auth", "deauth", "reserved#13", "reserved#14", "reserved#15" }; const char *ieee80211_ctl_subtype_name[] = { "reserved#0", "reserved#1", "reserved#2", "reserved#3", "reserved#3", "reserved#5", "reserved#6", "reserved#7", "reserved#8", "reserved#9", "ps_poll", "rts", "cts", "ack", "cf_end", "cf_end_ack" }; const char *ieee80211_state_name[IEEE80211_S_MAX] = { "INIT", /* IEEE80211_S_INIT */ "SCAN", /* IEEE80211_S_SCAN */ "AUTH", /* IEEE80211_S_AUTH */ "ASSOC", /* IEEE80211_S_ASSOC */ "RUN" /* IEEE80211_S_RUN */ }; const char *ieee80211_wme_acnames[] = { "WME_AC_BE", "WME_AC_BK", "WME_AC_VI", "WME_AC_VO", "WME_UPSD", }; static int ieee80211_newstate(ieee80211com_t *, enum ieee80211_state, int); /* * Initialize the interface softc, ic, with protocol management * related data structures and functions. */ void ieee80211_proto_attach(ieee80211com_t *ic) { struct ieee80211_impl *im = ic->ic_private; ic->ic_rtsthreshold = IEEE80211_RTS_DEFAULT; ic->ic_fragthreshold = IEEE80211_FRAG_DEFAULT; ic->ic_fixed_rate = IEEE80211_FIXED_RATE_NONE; ic->ic_protmode = IEEE80211_PROT_CTSONLY; im->im_bmiss_max = IEEE80211_BMISS_MAX; ic->ic_wme.wme_hipri_switch_hysteresis = AGGRESSIVE_MODE_SWITCH_HYSTERESIS; /* protocol state change handler */ ic->ic_newstate = ieee80211_newstate; /* initialize management frame handlers */ ic->ic_recv_mgmt = ieee80211_recv_mgmt; ic->ic_send_mgmt = ieee80211_send_mgmt; } /* * Print a 802.11 frame header */ void ieee80211_dump_pkt(const uint8_t *buf, int32_t len, int32_t rate, int32_t rssi) { struct ieee80211_frame *wh; int8_t buf1[100]; int8_t buf2[25]; int i; bzero(buf1, sizeof (buf1)); bzero(buf2, sizeof (buf2)); wh = (struct ieee80211_frame *)buf; switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) { case IEEE80211_FC1_DIR_NODS: (void) snprintf(buf2, sizeof (buf2), "NODS %s", ieee80211_macaddr_sprintf(wh->i_addr2)); (void) strncat(buf1, buf2, sizeof (buf2)); (void) snprintf(buf2, sizeof (buf2), "->%s", ieee80211_macaddr_sprintf(wh->i_addr1)); (void) strncat(buf1, buf2, sizeof (buf2)); (void) snprintf(buf2, sizeof (buf2), "(%s)", ieee80211_macaddr_sprintf(wh->i_addr3)); (void) strncat(buf1, buf2, sizeof (buf2)); break; case IEEE80211_FC1_DIR_TODS: (void) snprintf(buf2, sizeof (buf2), "TODS %s", ieee80211_macaddr_sprintf(wh->i_addr2)); (void) strncat(buf1, buf2, sizeof (buf2)); (void) snprintf(buf2, sizeof (buf2), "->%s", ieee80211_macaddr_sprintf(wh->i_addr3)); (void) strncat(buf1, buf2, sizeof (buf2)); (void) snprintf(buf2, sizeof (buf2), "(%s)", ieee80211_macaddr_sprintf(wh->i_addr1)); (void) strncat(buf1, buf2, sizeof (buf2)); break; case IEEE80211_FC1_DIR_FROMDS: (void) snprintf(buf2, sizeof (buf2), "FRDS %s", ieee80211_macaddr_sprintf(wh->i_addr3)); (void) strncat(buf1, buf2, sizeof (buf2)); (void) snprintf(buf2, sizeof (buf2), "->%s", ieee80211_macaddr_sprintf(wh->i_addr1)); (void) strncat(buf1, buf2, sizeof (buf2)); (void) snprintf(buf2, sizeof (buf2), "(%s)", ieee80211_macaddr_sprintf(wh->i_addr2)); (void) strncat(buf1, buf2, sizeof (buf2)); break; case IEEE80211_FC1_DIR_DSTODS: (void) snprintf(buf2, sizeof (buf2), "DSDS %s", ieee80211_macaddr_sprintf((uint8_t *)&wh[1])); (void) strncat(buf1, buf2, sizeof (buf2)); (void) snprintf(buf2, sizeof (buf2), "->%s ", ieee80211_macaddr_sprintf(wh->i_addr3)); (void) strncat(buf1, buf2, sizeof (buf2)); (void) snprintf(buf2, sizeof (buf2), "%s", ieee80211_macaddr_sprintf(wh->i_addr2)); (void) strncat(buf1, buf2, sizeof (buf2)); (void) snprintf(buf2, sizeof (buf2), "->%s", ieee80211_macaddr_sprintf(wh->i_addr1)); (void) strncat(buf1, buf2, sizeof (buf2)); break; } ieee80211_dbg(IEEE80211_MSG_ANY, "ieee80211_dump_pkt(): %s", buf1); bzero(buf1, sizeof (buf1)); switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) { case IEEE80211_FC0_TYPE_DATA: (void) sprintf(buf2, "data"); break; case IEEE80211_FC0_TYPE_MGT: (void) snprintf(buf2, sizeof (buf2), "%s", ieee80211_mgt_subtype_name[ (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) >> IEEE80211_FC0_SUBTYPE_SHIFT]); break; default: (void) snprintf(buf2, sizeof (buf2), "type#%d", wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK); break; } (void) strncat(buf1, buf2, sizeof (buf2)); if (wh->i_fc[1] & IEEE80211_FC1_WEP) { (void) sprintf(buf2, " WEP"); (void) strcat(buf1, buf2); } if (rate >= 0) { (void) snprintf(buf2, sizeof (buf2), " %dM", rate / 2); (void) strncat(buf1, buf2, sizeof (buf2)); } if (rssi >= 0) { (void) snprintf(buf2, sizeof (buf2), " +%d", rssi); (void) strncat(buf1, buf2, sizeof (buf2)); } ieee80211_dbg(IEEE80211_MSG_ANY, "ieee80211_dump_pkt(): %s", buf1); bzero(buf1, sizeof (buf1)); if (len > 0) { for (i = 0; i < (len > 40 ? 40 : len); i++) { if ((i & 0x03) == 0) (void) strcat(buf1, " "); (void) snprintf(buf2, 3, "%02x", buf[i]); (void) strncat(buf1, buf2, 3); } ieee80211_dbg(IEEE80211_MSG_ANY, "ieee80211_dump_pkt(): %s", buf1); } } /* * Adjust/Fix the specified node's rate table * * in node * flag IEEE80211_F_DOSORT : sort the node's rate table * IEEE80211_F_DONEGO : mark a rate as basic rate if it is * a device's basic rate * IEEE80211_F_DODEL : delete rates not supported by the device * IEEE80211_F_DOFRATE: check if the fixed rate is supported by * the device * * The highest bit of returned rate value is set to 1 on failure. */ int ieee80211_fix_rate(ieee80211_node_t *in, struct ieee80211_rateset *nrs, int flags) { ieee80211com_t *ic = in->in_ic; struct ieee80211_rateset *srs; boolean_t ignore; int i; int okrate; int badrate; int fixedrate; uint8_t r; /* * If the fixed rate check was requested but no * fixed has been defined then just remove it. */ if ((flags & IEEE80211_F_DOFRATE) && (ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE)) { flags &= ~IEEE80211_F_DOFRATE; } if (in->in_chan == IEEE80211_CHAN_ANYC) { return (IEEE80211_RATE_BASIC); } okrate = badrate = fixedrate = 0; srs = &ic->ic_sup_rates[ieee80211_chan2mode(ic, in->in_chan)]; for (i = 0; i < nrs->ir_nrates; ) { int j; ignore = B_FALSE; if (flags & IEEE80211_F_DOSORT) { /* * Sort rates. */ for (j = i + 1; j < nrs->ir_nrates; j++) { if (IEEE80211_RV(nrs->ir_rates[i]) > IEEE80211_RV(nrs->ir_rates[j])) { r = nrs->ir_rates[i]; nrs->ir_rates[i] = nrs->ir_rates[j]; nrs->ir_rates[j] = r; } } } r = IEEE80211_RV(nrs->ir_rates[i]); badrate = r; /* * Check against supported rates. */ for (j = 0; j < srs->ir_nrates; j++) { if (r == IEEE80211_RV(srs->ir_rates[j])) { /* * Overwrite with the supported rate * value so any basic rate bit is set. * This insures that response we send * to stations have the necessary basic * rate bit set. */ if (flags & IEEE80211_F_DONEGO) nrs->ir_rates[i] = srs->ir_rates[j]; break; } } if (j == srs->ir_nrates) { /* * A rate in the node's rate set is not * supported. We just discard/ignore the rate. * Note that this is important for 11b stations * when they want to associate with an 11g AP. */ ignore = B_TRUE; } if (flags & IEEE80211_F_DODEL) { /* * Delete unacceptable rates. */ if (ignore) { nrs->ir_nrates--; for (j = i; j < nrs->ir_nrates; j++) nrs->ir_rates[j] = nrs->ir_rates[j + 1]; nrs->ir_rates[j] = 0; continue; } } if (flags & IEEE80211_F_DOFRATE) { /* * Check any fixed rate is included. */ if (r == ic->ic_fixed_rate) fixedrate = r; } if (!ignore) okrate = nrs->ir_rates[i]; i++; } if (okrate == 0 || ((flags & IEEE80211_F_DOFRATE) && fixedrate == 0)) return (badrate | IEEE80211_RATE_BASIC); else return (IEEE80211_RV(okrate)); } /* * Reset 11g-related state. */ void ieee80211_reset_erp(ieee80211com_t *ic) { ic->ic_flags &= ~IEEE80211_F_USEPROT; /* * Short slot time is enabled only when operating in 11g * and not in an IBSS. We must also honor whether or not * the driver is capable of doing it. */ ieee80211_set_shortslottime(ic, ic->ic_curmode == IEEE80211_MODE_11A); /* * Set short preamble and ERP barker-preamble flags. */ if (ic->ic_curmode == IEEE80211_MODE_11A || (ic->ic_caps & IEEE80211_C_SHPREAMBLE)) { ic->ic_flags |= IEEE80211_F_SHPREAMBLE; ic->ic_flags &= ~IEEE80211_F_USEBARKER; } else { ic->ic_flags &= ~IEEE80211_F_SHPREAMBLE; ic->ic_flags |= IEEE80211_F_USEBARKER; } } /* * Change current channel to be the next available channel */ void ieee80211_reset_chan(ieee80211com_t *ic) { struct ieee80211_channel *ch = ic->ic_curchan; IEEE80211_LOCK(ic); do { if (++ch > &ic->ic_sup_channels[IEEE80211_CHAN_MAX]) ch = &ic->ic_sup_channels[0]; if (ieee80211_isset(ic->ic_chan_active, ieee80211_chan2ieee(ic, ch))) { break; } } while (ch != ic->ic_curchan); ic->ic_curchan = ch; IEEE80211_UNLOCK(ic); } /* * Set the short slot time state and notify the driver. */ void ieee80211_set_shortslottime(ieee80211com_t *ic, boolean_t on) { if (on) ic->ic_flags |= IEEE80211_F_SHSLOT; else ic->ic_flags &= ~IEEE80211_F_SHSLOT; /* notify driver */ if (ic->ic_set_shortslot != NULL) ic->ic_set_shortslot(ic, on); } /* * Mark the basic rates for the 11g rate table based on the * operating mode. For real 11g we mark all the 11b rates * and 6, 12, and 24 OFDM. For 11b compatibility we mark only * 11b rates. There's also a pseudo 11a-mode used to mark only * the basic OFDM rates. */ void ieee80211_setbasicrates(struct ieee80211_rateset *rs, enum ieee80211_phymode mode) { static const struct ieee80211_rateset basic[] = { { 0 }, /* IEEE80211_MODE_AUTO */ { 3, { 12, 24, 48 } }, /* IEEE80211_MODE_11A */ { 2, { 2, 4} }, /* IEEE80211_MODE_11B */ { 4, { 2, 4, 11, 22 } }, /* IEEE80211_MODE_11G mixed b/g */ { 0 }, /* IEEE80211_MODE_FH */ { 3, { 12, 24, 48 } }, /* IEEE80211_MODE_TURBO_A */ { 4, { 2, 4, 11, 22 } }, /* IEEE80211_MODE_TURBO_G (mixed b/g) */ { 0 }, /* IEEE80211_MODE_STURBO_A */ { 3, { 12, 24, 48 } }, /* IEEE80211_MODE_11NA */ /* IEEE80211_MODE_11NG (mixed b/g) */ { 7, { 2, 4, 11, 22, 12, 24, 48 } } }; int i, j; ASSERT(mode < IEEE80211_MODE_MAX); for (i = 0; i < rs->ir_nrates; i++) { rs->ir_rates[i] &= IEEE80211_RATE_VAL; for (j = 0; j < basic[mode].ir_nrates; j++) { if (basic[mode].ir_rates[j] == rs->ir_rates[i]) { rs->ir_rates[i] |= IEEE80211_RATE_BASIC; break; } } } } /* * WME protocol support. The following parameters come from the spec. */ typedef struct phyParamType { uint8_t aifsn; uint8_t logcwmin; uint8_t logcwmax; uint16_t txopLimit; uint8_t acm; } paramType; static const paramType phyParamForAC_BE[IEEE80211_MODE_MAX] = { { 3, 4, 6, 0, 0 }, /* IEEE80211_MODE_AUTO */ { 3, 4, 6, 0, 0 }, /* IEEE80211_MODE_11A */ { 3, 4, 6, 0, 0 }, /* IEEE80211_MODE_11B */ { 3, 4, 6, 0, 0 }, /* IEEE80211_MODE_11G */ { 3, 4, 6, 0, 0 }, /* IEEE80211_MODE_FH */ { 2, 3, 5, 0, 0 }, /* IEEE80211_MODE_TURBO_A */ { 2, 3, 5, 0, 0 }, /* IEEE80211_MODE_TURBO_G */ { 2, 3, 5, 0, 0 }, /* IEEE80211_MODE_STURBO_A */ { 3, 4, 6, 0, 0 }, /* IEEE80211_MODE_11NA */ { 3, 4, 6, 0, 0 } /* IEEE80211_MODE_11NG */ }; static const struct phyParamType phyParamForAC_BK[IEEE80211_MODE_MAX] = { { 7, 4, 10, 0, 0 }, /* IEEE80211_MODE_AUTO */ { 7, 4, 10, 0, 0 }, /* IEEE80211_MODE_11A */ { 7, 4, 10, 0, 0 }, /* IEEE80211_MODE_11B */ { 7, 4, 10, 0, 0 }, /* IEEE80211_MODE_11G */ { 7, 4, 10, 0, 0 }, /* IEEE80211_MODE_FH */ { 7, 3, 10, 0, 0 }, /* IEEE80211_MODE_TURBO_A */ { 7, 3, 10, 0, 0 }, /* IEEE80211_MODE_TURBO_G */ { 7, 3, 10, 0, 0 }, /* IEEE80211_MODE_STURBO_A */ { 7, 4, 10, 0, 0 }, /* IEEE80211_MODE_11NA */ { 7, 4, 10, 0, 0 }, /* IEEE80211_MODE_11NG */ }; static const struct phyParamType phyParamForAC_VI[IEEE80211_MODE_MAX] = { { 1, 3, 4, 94, 0 }, /* IEEE80211_MODE_AUTO */ { 1, 3, 4, 94, 0 }, /* IEEE80211_MODE_11A */ { 1, 3, 4, 188, 0 }, /* IEEE80211_MODE_11B */ { 1, 3, 4, 94, 0 }, /* IEEE80211_MODE_11G */ { 1, 3, 4, 188, 0 }, /* IEEE80211_MODE_FH */ { 1, 2, 3, 94, 0 }, /* IEEE80211_MODE_TURBO_A */ { 1, 2, 3, 94, 0 }, /* IEEE80211_MODE_TURBO_G */ { 1, 2, 3, 94, 0 }, /* IEEE80211_MODE_STURBO_A */ { 1, 3, 4, 94, 0 }, /* IEEE80211_MODE_11NA */ { 1, 3, 4, 94, 0 }, /* IEEE80211_MODE_11NG */ }; static const struct phyParamType phyParamForAC_VO[IEEE80211_MODE_MAX] = { { 1, 2, 3, 47, 0 }, /* IEEE80211_MODE_AUTO */ { 1, 2, 3, 47, 0 }, /* IEEE80211_MODE_11A */ { 1, 2, 3, 102, 0 }, /* IEEE80211_MODE_11B */ { 1, 2, 3, 47, 0 }, /* IEEE80211_MODE_11G */ { 1, 2, 3, 102, 0 }, /* IEEE80211_MODE_FH */ { 1, 2, 2, 47, 0 }, /* IEEE80211_MODE_TURBO_A */ { 1, 2, 2, 47, 0 }, /* IEEE80211_MODE_TURBO_G */ { 1, 2, 2, 47, 0 }, /* IEEE80211_MODE_STURBO_A */ { 1, 2, 3, 47, 0 }, /* IEEE80211_MODE_11NA */ { 1, 2, 3, 47, 0 }, /* IEEE80211_MODE_11NG */ }; static const struct phyParamType bssPhyParamForAC_BE[IEEE80211_MODE_MAX] = { { 3, 4, 10, 0, 0 }, /* IEEE80211_MODE_AUTO */ { 3, 4, 10, 0, 0 }, /* IEEE80211_MODE_11A */ { 3, 4, 10, 0, 0 }, /* IEEE80211_MODE_11B */ { 3, 4, 10, 0, 0 }, /* IEEE80211_MODE_11G */ { 3, 4, 10, 0, 0 }, /* IEEE80211_MODE_FH */ { 2, 3, 10, 0, 0 }, /* IEEE80211_MODE_TURBO_A */ { 2, 3, 10, 0, 0 }, /* IEEE80211_MODE_TURBO_G */ { 2, 3, 10, 0, 0 }, /* IEEE80211_MODE_STURBO_A */ { 3, 4, 10, 0, 0 }, /* IEEE80211_MODE_11NA */ { 3, 4, 10, 0, 0 }, /* IEEE80211_MODE_11NG */ }; static const struct phyParamType bssPhyParamForAC_VI[IEEE80211_MODE_MAX] = { { 2, 3, 4, 94, 0 }, /* IEEE80211_MODE_AUTO */ { 2, 3, 4, 94, 0 }, /* IEEE80211_MODE_11A */ { 2, 3, 4, 188, 0 }, /* IEEE80211_MODE_11B */ { 2, 3, 4, 94, 0 }, /* IEEE80211_MODE_11G */ { 2, 3, 4, 188, 0 }, /* IEEE80211_MODE_FH */ { 2, 2, 3, 94, 0 }, /* IEEE80211_MODE_TURBO_A */ { 2, 2, 3, 94, 0 }, /* IEEE80211_MODE_TURBO_G */ { 2, 2, 3, 94, 0 }, /* IEEE80211_MODE_STURBO_A */ { 2, 3, 4, 94, 0 }, /* IEEE80211_MODE_11NA */ { 2, 3, 4, 94, 0 }, /* IEEE80211_MODE_11NG */ }; static const struct phyParamType bssPhyParamForAC_VO[IEEE80211_MODE_MAX] = { { 2, 2, 3, 47, 0 }, /* IEEE80211_MODE_AUTO */ { 2, 2, 3, 47, 0 }, /* IEEE80211_MODE_11A */ { 2, 2, 3, 102, 0 }, /* IEEE80211_MODE_11B */ { 2, 2, 3, 47, 0 }, /* IEEE80211_MODE_11G */ { 2, 2, 3, 102, 0 }, /* IEEE80211_MODE_FH */ { 1, 2, 2, 47, 0 }, /* IEEE80211_MODE_TURBO_A */ { 1, 2, 2, 47, 0 }, /* IEEE80211_MODE_TURBO_G */ { 1, 2, 2, 47, 0 }, /* IEEE80211_MODE_STURBO_A */ { 2, 2, 3, 47, 0 }, /* IEEE80211_MODE_11NA */ { 2, 2, 3, 47, 0 }, /* IEEE80211_MODE_11NG */ }; void ieee80211_wme_initparams(struct ieee80211com *ic) { struct ieee80211_wme_state *wme = &ic->ic_wme; const paramType *pPhyParam, *pBssPhyParam; struct wmeParams *wmep; enum ieee80211_phymode mode; int i; if ((ic->ic_caps & IEEE80211_C_WME) == 0) return; /* * Select mode; we can be called early in which case we * always use auto mode. We know we'll be called when * entering the RUN state with bsschan setup properly * so state will eventually get set correctly */ if (ic->ic_curchan != IEEE80211_CHAN_ANYC) mode = ieee80211_chan2mode(ic, ic->ic_curchan); else mode = IEEE80211_MODE_AUTO; for (i = 0; i < WME_NUM_AC; i++) { switch (i) { case WME_AC_BK: pPhyParam = &phyParamForAC_BK[mode]; pBssPhyParam = &phyParamForAC_BK[mode]; break; case WME_AC_VI: pPhyParam = &phyParamForAC_VI[mode]; pBssPhyParam = &bssPhyParamForAC_VI[mode]; break; case WME_AC_VO: pPhyParam = &phyParamForAC_VO[mode]; pBssPhyParam = &bssPhyParamForAC_VO[mode]; break; case WME_AC_BE: default: pPhyParam = &phyParamForAC_BE[mode]; pBssPhyParam = &bssPhyParamForAC_BE[mode]; break; } wmep = &wme->wme_wmeChanParams.cap_wmeParams[i]; if (ic->ic_opmode == IEEE80211_M_HOSTAP) { wmep->wmep_acm = pPhyParam->acm; wmep->wmep_aifsn = pPhyParam->aifsn; wmep->wmep_logcwmin = pPhyParam->logcwmin; wmep->wmep_logcwmax = pPhyParam->logcwmax; wmep->wmep_txopLimit = pPhyParam->txopLimit; } else { wmep->wmep_acm = pBssPhyParam->acm; wmep->wmep_aifsn = pBssPhyParam->aifsn; wmep->wmep_logcwmin = pBssPhyParam->logcwmin; wmep->wmep_logcwmax = pBssPhyParam->logcwmax; wmep->wmep_txopLimit = pBssPhyParam->txopLimit; } ieee80211_dbg(IEEE80211_MSG_WME, "ieee80211_wme_initparams: " "%s chan [acm %u aifsn %u log2(cwmin) %u " "log2(cwmax) %u txpoLimit %u]\n", ieee80211_wme_acnames[i], wmep->wmep_acm, wmep->wmep_aifsn, wmep->wmep_logcwmin, wmep->wmep_logcwmax, wmep->wmep_txopLimit); wmep = &wme->wme_wmeBssChanParams.cap_wmeParams[i]; wmep->wmep_acm = pBssPhyParam->acm; wmep->wmep_aifsn = pBssPhyParam->aifsn; wmep->wmep_logcwmin = pBssPhyParam->logcwmin; wmep->wmep_logcwmax = pBssPhyParam->logcwmax; wmep->wmep_txopLimit = pBssPhyParam->txopLimit; ieee80211_dbg(IEEE80211_MSG_WME, "ieee80211_wme_initparams: " "%s bss [acm %u aifsn %u log2(cwmin) %u " "log2(cwmax) %u txpoLimit %u]\n", ieee80211_wme_acnames[i], wmep->wmep_acm, wmep->wmep_aifsn, wmep->wmep_logcwmin, wmep->wmep_logcwmax, wmep->wmep_txopLimit); } /* NB: check ic_bss to avoid NULL deref on initial attach */ if (ic->ic_bss != NULL) { /* * Calculate agressive mode switching threshold based * on beacon interval. This doesn't need locking since * we're only called before entering the RUN state at * which point we start sending beacon frames. */ wme->wme_hipri_switch_thresh = (HIGH_PRI_SWITCH_THRESH * ic->ic_bss->in_intval) / 100; ieee80211_wme_updateparams(ic); } } /* * Update WME parameters for ourself and the BSS. */ void ieee80211_wme_updateparams(struct ieee80211com *ic) { static const paramType phyParam[IEEE80211_MODE_MAX] = { { 2, 4, 10, 64, 0 }, /* IEEE80211_MODE_AUTO */ { 2, 4, 10, 64, 0 }, /* IEEE80211_MODE_11A */ { 2, 5, 10, 64, 0 }, /* IEEE80211_MODE_11B */ { 2, 4, 10, 64, 0 }, /* IEEE80211_MODE_11G */ { 2, 5, 10, 64, 0 }, /* IEEE80211_MODE_FH */ { 1, 3, 10, 64, 0 }, /* IEEE80211_MODE_TURBO_A */ { 1, 3, 10, 64, 0 }, /* IEEE80211_MODE_TURBO_G */ { 1, 3, 10, 64, 0 }, /* IEEE80211_MODE_STURBO_A */ { 2, 4, 10, 64, 0 }, /* IEEE80211_MODE_11NA */ { 2, 4, 10, 64, 0 }, /* IEEE80211_MODE_11NG */ }; struct ieee80211_wme_state *wme = &ic->ic_wme; const struct wmeParams *wmep; struct wmeParams *chanp, *bssp; enum ieee80211_phymode mode; int i; if ((ic->ic_caps & IEEE80211_C_WME) == 0) return; /* set up the channel access parameters for the physical device */ for (i = 0; i < WME_NUM_AC; i++) { chanp = &wme->wme_chanParams.cap_wmeParams[i]; wmep = &wme->wme_wmeChanParams.cap_wmeParams[i]; chanp->wmep_aifsn = wmep->wmep_aifsn; chanp->wmep_logcwmin = wmep->wmep_logcwmin; chanp->wmep_logcwmax = wmep->wmep_logcwmax; chanp->wmep_txopLimit = wmep->wmep_txopLimit; chanp = &wme->wme_bssChanParams.cap_wmeParams[i]; wmep = &wme->wme_wmeBssChanParams.cap_wmeParams[i]; chanp->wmep_aifsn = wmep->wmep_aifsn; chanp->wmep_logcwmin = wmep->wmep_logcwmin; chanp->wmep_logcwmax = wmep->wmep_logcwmax; chanp->wmep_txopLimit = wmep->wmep_txopLimit; } /* * Select mode; we can be called early in which case we * always use auto mode. We know we'll be called when * entering the RUN state with bsschan setup properly * so state will eventually get set correctly */ if (ic->ic_curchan != IEEE80211_CHAN_ANYC) mode = ieee80211_chan2mode(ic, ic->ic_curchan); else mode = IEEE80211_MODE_AUTO; /* * This implements agressive mode as found in certain * vendors' AP's. When there is significant high * priority (VI/VO) traffic in the BSS throttle back BE * traffic by using conservative parameters. Otherwise * BE uses agressive params to optimize performance of * legacy/non-QoS traffic. */ if ((ic->ic_opmode == IEEE80211_M_HOSTAP && (wme->wme_flags & WME_F_AGGRMODE) != 0) || (ic->ic_opmode == IEEE80211_M_STA && (ic->ic_bss->in_flags & IEEE80211_NODE_QOS) == 0) || (ic->ic_flags & IEEE80211_F_WME) == 0) { chanp = &wme->wme_chanParams.cap_wmeParams[WME_AC_BE]; bssp = &wme->wme_bssChanParams.cap_wmeParams[WME_AC_BE]; chanp->wmep_aifsn = bssp->wmep_aifsn = phyParam[mode].aifsn; chanp->wmep_logcwmin = bssp->wmep_logcwmin = phyParam[mode].logcwmin; chanp->wmep_logcwmax = bssp->wmep_logcwmax = phyParam[mode].logcwmax; chanp->wmep_txopLimit = bssp->wmep_txopLimit = (ic->ic_flags & IEEE80211_F_BURST) ? phyParam[mode].txopLimit : 0; ieee80211_dbg(IEEE80211_MSG_WME, "ieee80211_wme_updateparams_locked: " "%s [acm %u aifsn %u log2(cwmin) %u " "log2(cwmax) %u txpoLimit %u]\n", ieee80211_wme_acnames[WME_AC_BE], chanp->wmep_acm, chanp->wmep_aifsn, chanp->wmep_logcwmin, chanp->wmep_logcwmax, chanp->wmep_txopLimit); } wme->wme_update(ic); ieee80211_dbg(IEEE80211_MSG_WME, "ieee80211_wme_updateparams(): " "WME params updated, cap_info 0x%x\n", ic->ic_opmode == IEEE80211_M_STA ? wme->wme_wmeChanParams.cap_info : wme->wme_bssChanParams.cap_info); } /* * Process STA mode beacon miss events. Send a direct probe request * frame to the current ap bmiss_max times (w/o answer) before * scanning for a new ap. */ void ieee80211_beacon_miss(ieee80211com_t *ic) { ieee80211_impl_t *im = ic->ic_private; if (ic->ic_flags & IEEE80211_F_SCAN) return; ieee80211_dbg(IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG, "%s\n", "beacon miss"); /* * Our handling is only meaningful for stations that are * associated; any other conditions else will be handled * through different means (e.g. the tx timeout on mgt frames). */ if (ic->ic_opmode != IEEE80211_M_STA || ic->ic_state != IEEE80211_S_RUN) { return; } IEEE80211_LOCK(ic); if (++im->im_bmiss_count < im->im_bmiss_max) { /* * Send a directed probe req before falling back to a scan; * if we receive a response ic_bmiss_count will be reset. * Some cards mistakenly report beacon miss so this avoids * the expensive scan if the ap is still there. */ IEEE80211_UNLOCK(ic); (void) ieee80211_send_probereq(ic->ic_bss, ic->ic_macaddr, ic->ic_bss->in_bssid, ic->ic_bss->in_bssid, ic->ic_bss->in_essid, ic->ic_bss->in_esslen, ic->ic_opt_ie, ic->ic_opt_ie_len); return; } im->im_bmiss_count = 0; IEEE80211_UNLOCK(ic); ieee80211_new_state(ic, IEEE80211_S_SCAN, 0); } /* * Manage state transition between INIT | AUTH | ASSOC | RUN. */ static int ieee80211_newstate(ieee80211com_t *ic, enum ieee80211_state nstate, int arg) { struct ieee80211_impl *im = ic->ic_private; ieee80211_node_t *in; enum ieee80211_state ostate; wifi_data_t wd = { 0 }; IEEE80211_LOCK(ic); ostate = ic->ic_state; ieee80211_dbg(IEEE80211_MSG_STATE, "ieee80211_newstate(): " "%s -> %s\n", ieee80211_state_name[ostate], ieee80211_state_name[nstate]); ic->ic_state = nstate; in = ic->ic_bss; im->im_swbmiss_period = 0; /* Reset software beacon miss period */ switch (nstate) { case IEEE80211_S_INIT: IEEE80211_UNLOCK(ic); switch (ostate) { case IEEE80211_S_INIT: return (0); case IEEE80211_S_SCAN: ieee80211_cancel_scan(ic); break; case IEEE80211_S_AUTH: break; case IEEE80211_S_ASSOC: if (ic->ic_opmode == IEEE80211_M_STA) { IEEE80211_SEND_MGMT(ic, in, IEEE80211_FC0_SUBTYPE_DEAUTH, IEEE80211_REASON_AUTH_LEAVE); } break; case IEEE80211_S_RUN: switch (ic->ic_opmode) { case IEEE80211_M_STA: IEEE80211_SEND_MGMT(ic, in, IEEE80211_FC0_SUBTYPE_DEAUTH, IEEE80211_REASON_AUTH_LEAVE); ieee80211_sta_leave(ic, in); break; case IEEE80211_M_IBSS: ieee80211_notify_node_leave(ic, in); break; default: break; } break; } IEEE80211_LOCK(ic); im->im_mgt_timer = 0; ieee80211_reset_bss(ic); break; case IEEE80211_S_SCAN: switch (ostate) { case IEEE80211_S_INIT: IEEE80211_UNLOCK(ic); ieee80211_begin_scan(ic, (arg == 0) ? B_FALSE : B_TRUE); return (0); case IEEE80211_S_SCAN: /* * Scan next. If doing an active scan and the * channel is not marked passive-only then send * a probe request. Otherwise just listen for * beacons on the channel. */ if ((ic->ic_flags & IEEE80211_F_ASCAN) && !IEEE80211_IS_CHAN_PASSIVE(ic->ic_curchan)) { IEEE80211_UNLOCK(ic); (void) ieee80211_send_probereq(in, ic->ic_macaddr, wifi_bcastaddr, wifi_bcastaddr, ic->ic_des_essid, ic->ic_des_esslen, ic->ic_opt_ie, ic->ic_opt_ie_len); return (0); } break; case IEEE80211_S_RUN: /* beacon miss */ ieee80211_dbg(IEEE80211_MSG_STATE, "no recent beacons from %s, rescanning\n", ieee80211_macaddr_sprintf(in->in_macaddr)); IEEE80211_UNLOCK(ic); ieee80211_sta_leave(ic, in); IEEE80211_LOCK(ic); ic->ic_flags &= ~IEEE80211_F_SIBSS; /* FALLTHRU */ case IEEE80211_S_AUTH: case IEEE80211_S_ASSOC: /* timeout restart scan */ in = ieee80211_find_node(&ic->ic_scan, ic->ic_bss->in_macaddr); if (in != NULL) { in->in_fails++; ieee80211_unref_node(&in); } break; } break; case IEEE80211_S_AUTH: ASSERT(ic->ic_opmode == IEEE80211_M_STA); switch (ostate) { case IEEE80211_S_INIT: case IEEE80211_S_SCAN: IEEE80211_UNLOCK(ic); IEEE80211_SEND_MGMT(ic, in, IEEE80211_FC0_SUBTYPE_AUTH, 1); return (0); case IEEE80211_S_AUTH: case IEEE80211_S_ASSOC: switch (arg) { case IEEE80211_FC0_SUBTYPE_AUTH: IEEE80211_UNLOCK(ic); IEEE80211_SEND_MGMT(ic, in, IEEE80211_FC0_SUBTYPE_AUTH, 2); return (0); case IEEE80211_FC0_SUBTYPE_DEAUTH: /* ignore and retry scan on timeout */ break; } break; case IEEE80211_S_RUN: switch (arg) { case IEEE80211_FC0_SUBTYPE_AUTH: ic->ic_state = ostate; /* stay RUN */ IEEE80211_UNLOCK(ic); IEEE80211_SEND_MGMT(ic, in, IEEE80211_FC0_SUBTYPE_AUTH, 2); return (0); case IEEE80211_FC0_SUBTYPE_DEAUTH: IEEE80211_UNLOCK(ic); ieee80211_sta_leave(ic, in); /* try to re-auth */ IEEE80211_SEND_MGMT(ic, in, IEEE80211_FC0_SUBTYPE_AUTH, 1); return (0); } break; } break; case IEEE80211_S_ASSOC: ASSERT(ic->ic_opmode == IEEE80211_M_STA || ic->ic_opmode == IEEE80211_M_IBSS); switch (ostate) { case IEEE80211_S_INIT: case IEEE80211_S_SCAN: case IEEE80211_S_ASSOC: ieee80211_dbg(IEEE80211_MSG_ANY, "ieee80211_newstate: " "invalid transition\n"); break; case IEEE80211_S_AUTH: IEEE80211_UNLOCK(ic); IEEE80211_SEND_MGMT(ic, in, IEEE80211_FC0_SUBTYPE_ASSOC_REQ, 0); return (0); case IEEE80211_S_RUN: IEEE80211_UNLOCK(ic); ieee80211_sta_leave(ic, in); IEEE80211_SEND_MGMT(ic, in, IEEE80211_FC0_SUBTYPE_ASSOC_REQ, 1); return (0); } break; case IEEE80211_S_RUN: switch (ostate) { case IEEE80211_S_INIT: ieee80211_err("ieee80211_newstate: " "invalid transition\n"); break; case IEEE80211_S_AUTH: ieee80211_err("ieee80211_newstate: " "invalid transition\n"); break; case IEEE80211_S_SCAN: /* adhoc/hostap mode */ case IEEE80211_S_ASSOC: /* infra mode */ ASSERT(in->in_txrate < in->in_rates.ir_nrates); im->im_mgt_timer = 0; ieee80211_notify_node_join(ic, in); /* * We can send data now; update the fastpath with our * current associated BSSID and other relevant settings. */ wd.wd_secalloc = ieee80211_crypto_getciphertype(ic); wd.wd_opmode = ic->ic_opmode; IEEE80211_ADDR_COPY(wd.wd_bssid, in->in_bssid); wd.wd_qospad = 0; if (in->in_flags & (IEEE80211_NODE_QOS|IEEE80211_NODE_HT)) { wd.wd_qospad = 2; if (ic->ic_flags & IEEE80211_F_DATAPAD) { wd.wd_qospad = roundup(wd.wd_qospad, sizeof (uint32_t)); } } (void) mac_pdata_update(ic->ic_mach, &wd, sizeof (wd)); break; } /* * When 802.1x is not in use mark the port authorized * at this point so traffic can flow. */ if (in->in_authmode != IEEE80211_AUTH_8021X) ieee80211_node_authorize(in); /* * Enable inactivity processing. */ ic->ic_scan.nt_inact_timer = IEEE80211_INACT_WAIT; ic->ic_sta.nt_inact_timer = IEEE80211_INACT_WAIT; break; /* IEEE80211_S_RUN */ } /* switch nstate */ IEEE80211_UNLOCK(ic); return (0); }