/* * Copyright 2010 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any * redistribution must be conditioned upon including a substantially * similar Disclaimer requirement for further binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGES. * */ /* * Driver for the Atheros Wireless LAN controller. * * The Atheros driver calls into net80211 module for IEEE80211 protocol * management functionalities. The driver includes a LLD(Low Level Driver) * part to implement H/W related operations. * The following is the high level structure of ath driver. * (The arrows between modules indicate function call direction.) * * * | * | GLD thread * V * ================== ========================================= * | | |[1] | * | | | GLDv3 Callback functions registered | * | Net80211 | ========================= by | * | module | | | driver | * | | V | | * | |======================== | | * | Functions exported by net80211 | | | * | | | | * ========================================== ================= * | | * V | * +----------------------------------+ | * |[2] | | * | Net80211 Callback functions | | * | registered by LLD | | * +----------------------------------+ | * | | * V v * +-----------------------------------------------------------+ * |[3] | * | LLD Internal functions | * | | * +-----------------------------------------------------------+ * ^ * | Software interrupt thread * | * * The short description of each module is as below: * Module 1: GLD callback functions, which are intercepting the calls from * GLD to LLD. * Module 2: Net80211 callback functions registered by LLD, which * calls into LLD for H/W related functions needed by net80211. * Module 3: LLD Internal functions, which are responsible for allocing * descriptor/buffer, handling interrupt and other H/W * operations. * * All functions are running in 3 types of thread: * 1. GLD callbacks threads, such as ioctl, intr, etc. * 2. Clock interruptt thread which is responsible for scan, rate control and * calibration. * 3. Software Interrupt thread originated in LLD. * * The lock strategy is as below: * There have 4 queues for tx, each queue has one asc_txqlock[i] to * prevent conflicts access to queue resource from different thread. * * All the transmit buffers are contained in asc_txbuf which are * protected by asc_txbuflock. * * Each receive buffers are contained in asc_rxbuf which are protected * by asc_rxbuflock. * * In ath struct, asc_genlock is a general lock, protecting most other * operational data in ath_softc struct and HAL accesses. * It is acquired by the interupt handler and most "mode-ctrl" routines. * * Any of the locks can be acquired singly, but where multiple * locks are acquired, they *must* be in the order: * asc_genlock >> asc_txqlock[i] >> asc_txbuflock >> asc_rxbuflock */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ath_hal.h" #include "ath_impl.h" #include "ath_aux.h" #include "ath_rate.h" #define ATH_MAX_RSSI 63 /* max rssi */ extern void ath_halfix_init(void); extern void ath_halfix_finit(void); extern int32_t ath_getset(ath_t *asc, mblk_t *mp, uint32_t cmd); /* * PIO access attributes for registers */ static ddi_device_acc_attr_t ath_reg_accattr = { DDI_DEVICE_ATTR_V0, DDI_STRUCTURE_LE_ACC, DDI_STRICTORDER_ACC }; /* * DMA access attributes for descriptors: NOT to be byte swapped. */ static ddi_device_acc_attr_t ath_desc_accattr = { DDI_DEVICE_ATTR_V0, DDI_STRUCTURE_LE_ACC, DDI_STRICTORDER_ACC }; /* * DMA attributes for rx/tx buffers */ static ddi_dma_attr_t ath_dma_attr = { DMA_ATTR_V0, /* version number */ 0, /* low address */ 0xffffffffU, /* high address */ 0x3ffffU, /* counter register max */ 1, /* alignment */ 0xFFF, /* burst sizes */ 1, /* minimum transfer size */ 0x3ffffU, /* max transfer size */ 0xffffffffU, /* address register max */ 1, /* no scatter-gather */ 1, /* granularity of device */ 0, /* DMA flags */ }; static ddi_dma_attr_t ath_desc_dma_attr = { DMA_ATTR_V0, /* version number */ 0, /* low address */ 0xffffffffU, /* high address */ 0xffffffffU, /* counter register max */ 0x1000, /* alignment */ 0xFFF, /* burst sizes */ 1, /* minimum transfer size */ 0xffffffffU, /* max transfer size */ 0xffffffffU, /* address register max */ 1, /* no scatter-gather */ 1, /* granularity of device */ 0, /* DMA flags */ }; static kmutex_t ath_loglock; static void *ath_soft_state_p = NULL; static int ath_dwelltime = 150; /* scan interval, ms */ static int ath_m_stat(void *, uint_t, uint64_t *); static int ath_m_start(void *); static void ath_m_stop(void *); static int ath_m_promisc(void *, boolean_t); static int ath_m_multicst(void *, boolean_t, const uint8_t *); static int ath_m_unicst(void *, const uint8_t *); static mblk_t *ath_m_tx(void *, mblk_t *); static void ath_m_ioctl(void *, queue_t *, mblk_t *); static int ath_m_setprop(void *, const char *, mac_prop_id_t, uint_t, const void *); static int ath_m_getprop(void *, const char *, mac_prop_id_t, uint_t, void *); static void ath_m_propinfo(void *, const char *, mac_prop_id_t, mac_prop_info_handle_t); static mac_callbacks_t ath_m_callbacks = { MC_IOCTL | MC_SETPROP | MC_GETPROP | MC_PROPINFO, ath_m_stat, ath_m_start, ath_m_stop, ath_m_promisc, ath_m_multicst, ath_m_unicst, ath_m_tx, NULL, ath_m_ioctl, NULL, /* mc_getcapab */ NULL, NULL, ath_m_setprop, ath_m_getprop, ath_m_propinfo }; /* * Available debug flags: * ATH_DBG_INIT, ATH_DBG_GLD, ATH_DBG_HAL, ATH_DBG_INT, ATH_DBG_ATTACH, * ATH_DBG_DETACH, ATH_DBG_AUX, ATH_DBG_WIFICFG, ATH_DBG_OSDEP */ uint32_t ath_dbg_flags = 0; /* * Exception/warning cases not leading to panic. */ void ath_problem(const int8_t *fmt, ...) { va_list args; mutex_enter(&ath_loglock); va_start(args, fmt); vcmn_err(CE_WARN, fmt, args); va_end(args); mutex_exit(&ath_loglock); } /* * Normal log information independent of debug. */ void ath_log(const int8_t *fmt, ...) { va_list args; mutex_enter(&ath_loglock); va_start(args, fmt); vcmn_err(CE_CONT, fmt, args); va_end(args); mutex_exit(&ath_loglock); } void ath_dbg(uint32_t dbg_flags, const int8_t *fmt, ...) { va_list args; if (dbg_flags & ath_dbg_flags) { mutex_enter(&ath_loglock); va_start(args, fmt); vcmn_err(CE_CONT, fmt, args); va_end(args); mutex_exit(&ath_loglock); } } void ath_setup_desc(ath_t *asc, struct ath_buf *bf) { struct ath_desc *ds; ds = bf->bf_desc; ds->ds_link = bf->bf_daddr; ds->ds_data = bf->bf_dma.cookie.dmac_address; ATH_HAL_SETUPRXDESC(asc->asc_ah, ds, bf->bf_dma.alength, /* buffer size */ 0); if (asc->asc_rxlink != NULL) *asc->asc_rxlink = bf->bf_daddr; asc->asc_rxlink = &ds->ds_link; } /* * Allocate an area of memory and a DMA handle for accessing it */ static int ath_alloc_dma_mem(dev_info_t *devinfo, ddi_dma_attr_t *dma_attr, size_t memsize, ddi_device_acc_attr_t *attr_p, uint_t alloc_flags, uint_t bind_flags, dma_area_t *dma_p) { int err; /* * Allocate handle */ err = ddi_dma_alloc_handle(devinfo, dma_attr, DDI_DMA_SLEEP, NULL, &dma_p->dma_hdl); if (err != DDI_SUCCESS) return (DDI_FAILURE); /* * Allocate memory */ err = ddi_dma_mem_alloc(dma_p->dma_hdl, memsize, attr_p, alloc_flags, DDI_DMA_SLEEP, NULL, &dma_p->mem_va, &dma_p->alength, &dma_p->acc_hdl); if (err != DDI_SUCCESS) return (DDI_FAILURE); /* * Bind the two together */ err = ddi_dma_addr_bind_handle(dma_p->dma_hdl, NULL, dma_p->mem_va, dma_p->alength, bind_flags, DDI_DMA_SLEEP, NULL, &dma_p->cookie, &dma_p->ncookies); if (err != DDI_DMA_MAPPED) return (DDI_FAILURE); dma_p->nslots = ~0U; dma_p->size = ~0U; dma_p->token = ~0U; dma_p->offset = 0; return (DDI_SUCCESS); } /* * Free one allocated area of DMAable memory */ static void ath_free_dma_mem(dma_area_t *dma_p) { if (dma_p->dma_hdl != NULL) { (void) ddi_dma_unbind_handle(dma_p->dma_hdl); if (dma_p->acc_hdl != NULL) { ddi_dma_mem_free(&dma_p->acc_hdl); dma_p->acc_hdl = NULL; } ddi_dma_free_handle(&dma_p->dma_hdl); dma_p->ncookies = 0; dma_p->dma_hdl = NULL; } } /* * Initialize tx/rx buffer list. Allocate DMA memory for * each buffer. */ static int ath_buflist_setup(dev_info_t *devinfo, ath_t *asc, list_t *bflist, struct ath_buf **pbf, struct ath_desc **pds, int nbuf, uint_t dmabflags) { int i, err; struct ath_buf *bf = *pbf; struct ath_desc *ds = *pds; list_create(bflist, sizeof (struct ath_buf), offsetof(struct ath_buf, bf_node)); for (i = 0; i < nbuf; i++, bf++, ds++) { bf->bf_desc = ds; bf->bf_daddr = asc->asc_desc_dma.cookie.dmac_address + ((uintptr_t)ds - (uintptr_t)asc->asc_desc); list_insert_tail(bflist, bf); /* alloc DMA memory */ err = ath_alloc_dma_mem(devinfo, &ath_dma_attr, asc->asc_dmabuf_size, &ath_desc_accattr, DDI_DMA_STREAMING, dmabflags, &bf->bf_dma); if (err != DDI_SUCCESS) return (err); } *pbf = bf; *pds = ds; return (DDI_SUCCESS); } /* * Destroy tx/rx buffer list. Free DMA memory. */ static void ath_buflist_cleanup(list_t *buflist) { struct ath_buf *bf; if (!buflist) return; bf = list_head(buflist); while (bf != NULL) { if (bf->bf_m != NULL) { freemsg(bf->bf_m); bf->bf_m = NULL; } /* Free DMA buffer */ ath_free_dma_mem(&bf->bf_dma); if (bf->bf_in != NULL) { ieee80211_free_node(bf->bf_in); bf->bf_in = NULL; } list_remove(buflist, bf); bf = list_head(buflist); } list_destroy(buflist); } static void ath_desc_free(ath_t *asc) { ath_buflist_cleanup(&asc->asc_txbuf_list); ath_buflist_cleanup(&asc->asc_rxbuf_list); /* Free descriptor DMA buffer */ ath_free_dma_mem(&asc->asc_desc_dma); kmem_free((void *)asc->asc_vbufptr, asc->asc_vbuflen); asc->asc_vbufptr = NULL; } static int ath_desc_alloc(dev_info_t *devinfo, ath_t *asc) { int err; size_t size; struct ath_desc *ds; struct ath_buf *bf; size = sizeof (struct ath_desc) * (ATH_TXBUF + ATH_RXBUF); err = ath_alloc_dma_mem(devinfo, &ath_desc_dma_attr, size, &ath_desc_accattr, DDI_DMA_CONSISTENT, DDI_DMA_RDWR | DDI_DMA_CONSISTENT, &asc->asc_desc_dma); /* virtual address of the first descriptor */ asc->asc_desc = (struct ath_desc *)asc->asc_desc_dma.mem_va; ds = asc->asc_desc; ATH_DEBUG((ATH_DBG_INIT, "ath: ath_desc_alloc(): DMA map: " "%p (%d) -> %p\n", asc->asc_desc, asc->asc_desc_dma.alength, asc->asc_desc_dma.cookie.dmac_address)); /* allocate data structures to describe TX/RX DMA buffers */ asc->asc_vbuflen = sizeof (struct ath_buf) * (ATH_TXBUF + ATH_RXBUF); bf = (struct ath_buf *)kmem_zalloc(asc->asc_vbuflen, KM_SLEEP); asc->asc_vbufptr = bf; /* DMA buffer size for each TX/RX packet */ asc->asc_dmabuf_size = roundup(1000 + sizeof (struct ieee80211_frame) + IEEE80211_MTU + IEEE80211_CRC_LEN + (IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN + IEEE80211_WEP_CRCLEN), asc->asc_cachelsz); /* create RX buffer list */ err = ath_buflist_setup(devinfo, asc, &asc->asc_rxbuf_list, &bf, &ds, ATH_RXBUF, DDI_DMA_READ | DDI_DMA_STREAMING); if (err != DDI_SUCCESS) { ath_desc_free(asc); return (err); } /* create TX buffer list */ err = ath_buflist_setup(devinfo, asc, &asc->asc_txbuf_list, &bf, &ds, ATH_TXBUF, DDI_DMA_STREAMING); if (err != DDI_SUCCESS) { ath_desc_free(asc); return (err); } return (DDI_SUCCESS); } static void ath_printrxbuf(struct ath_buf *bf, int32_t done) { struct ath_desc *ds = bf->bf_desc; const struct ath_rx_status *rs = &bf->bf_status.ds_rxstat; ATH_DEBUG((ATH_DBG_RECV, "ath: R (%p %p) %08x %08x %08x " "%08x %08x %08x %c\n", ds, bf->bf_daddr, ds->ds_link, ds->ds_data, ds->ds_ctl0, ds->ds_ctl1, ds->ds_hw[0], ds->ds_hw[1], !done ? ' ' : (rs->rs_status == 0) ? '*' : '!')); } static void ath_rx_handler(ath_t *asc) { ieee80211com_t *ic = (ieee80211com_t *)asc; struct ath_buf *bf; struct ath_hal *ah = asc->asc_ah; struct ath_desc *ds; struct ath_rx_status *rs; mblk_t *rx_mp; struct ieee80211_frame *wh; int32_t len, loop = 1; uint8_t phyerr; HAL_STATUS status; HAL_NODE_STATS hal_node_stats; struct ieee80211_node *in; do { mutex_enter(&asc->asc_rxbuflock); bf = list_head(&asc->asc_rxbuf_list); if (bf == NULL) { ATH_DEBUG((ATH_DBG_RECV, "ath: ath_rx_handler(): " "no buffer\n")); mutex_exit(&asc->asc_rxbuflock); break; } ASSERT(bf->bf_dma.cookie.dmac_address != 0); ds = bf->bf_desc; if (ds->ds_link == bf->bf_daddr) { /* * Never process the self-linked entry at the end, * this may be met at heavy load. */ mutex_exit(&asc->asc_rxbuflock); break; } rs = &bf->bf_status.ds_rxstat; status = ATH_HAL_RXPROCDESC(ah, ds, bf->bf_daddr, ATH_PA2DESC(asc, ds->ds_link), rs); if (status == HAL_EINPROGRESS) { mutex_exit(&asc->asc_rxbuflock); break; } list_remove(&asc->asc_rxbuf_list, bf); mutex_exit(&asc->asc_rxbuflock); if (rs->rs_status != 0) { if (rs->rs_status & HAL_RXERR_CRC) asc->asc_stats.ast_rx_crcerr++; if (rs->rs_status & HAL_RXERR_FIFO) asc->asc_stats.ast_rx_fifoerr++; if (rs->rs_status & HAL_RXERR_DECRYPT) asc->asc_stats.ast_rx_badcrypt++; if (rs->rs_status & HAL_RXERR_PHY) { asc->asc_stats.ast_rx_phyerr++; phyerr = rs->rs_phyerr & 0x1f; asc->asc_stats.ast_rx_phy[phyerr]++; } goto rx_next; } len = rs->rs_datalen; /* less than sizeof(struct ieee80211_frame) */ if (len < 20) { asc->asc_stats.ast_rx_tooshort++; goto rx_next; } if ((rx_mp = allocb(asc->asc_dmabuf_size, BPRI_MED)) == NULL) { ath_problem("ath: ath_rx_handler(): " "allocing mblk buffer failed.\n"); return; } ATH_DMA_SYNC(bf->bf_dma, DDI_DMA_SYNC_FORCPU); bcopy(bf->bf_dma.mem_va, rx_mp->b_rptr, len); rx_mp->b_wptr += len; wh = (struct ieee80211_frame *)rx_mp->b_rptr; if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL) { /* * Ignore control frame received in promisc mode. */ freemsg(rx_mp); goto rx_next; } /* Remove the CRC at the end of IEEE80211 frame */ rx_mp->b_wptr -= IEEE80211_CRC_LEN; #ifdef DEBUG ath_printrxbuf(bf, status == HAL_OK); #endif /* DEBUG */ /* * Locate the node for sender, track state, and then * pass the (referenced) node up to the 802.11 layer * for its use. */ in = ieee80211_find_rxnode(ic, wh); /* * Send frame up for processing. */ (void) ieee80211_input(ic, rx_mp, in, rs->rs_rssi, rs->rs_tstamp); ieee80211_free_node(in); rx_next: mutex_enter(&asc->asc_rxbuflock); list_insert_tail(&asc->asc_rxbuf_list, bf); mutex_exit(&asc->asc_rxbuflock); ath_setup_desc(asc, bf); } while (loop); /* rx signal state monitoring */ ATH_HAL_RXMONITOR(ah, &hal_node_stats, &asc->asc_curchan); } static void ath_printtxbuf(struct ath_buf *bf, int done) { struct ath_desc *ds = bf->bf_desc; const struct ath_tx_status *ts = &bf->bf_status.ds_txstat; ATH_DEBUG((ATH_DBG_SEND, "ath: T(%p %p) %08x %08x %08x %08x %08x" " %08x %08x %08x %c\n", ds, bf->bf_daddr, ds->ds_link, ds->ds_data, ds->ds_ctl0, ds->ds_ctl1, ds->ds_hw[0], ds->ds_hw[1], ds->ds_hw[2], ds->ds_hw[3], !done ? ' ' : (ts->ts_status == 0) ? '*' : '!')); } /* * The input parameter mp has following assumption: * For data packets, GLDv3 mac_wifi plugin allocates and fills the * ieee80211 header. For management packets, net80211 allocates and * fills the ieee80211 header. In both cases, enough spaces in the * header are left for encryption option. */ static int32_t ath_tx_start(ath_t *asc, struct ieee80211_node *in, struct ath_buf *bf, mblk_t *mp) { ieee80211com_t *ic = (ieee80211com_t *)asc; struct ieee80211_frame *wh; struct ath_hal *ah = asc->asc_ah; uint32_t subtype, flags, ctsduration; int32_t keyix, iswep, hdrlen, pktlen, mblen, mbslen, try0; uint8_t rix, cix, txrate, ctsrate; struct ath_desc *ds; struct ath_txq *txq; HAL_PKT_TYPE atype; const HAL_RATE_TABLE *rt; HAL_BOOL shortPreamble; struct ath_node *an; caddr_t dest; /* * CRC are added by H/W, not encaped by driver, * but we must count it in pkt length. */ pktlen = IEEE80211_CRC_LEN; wh = (struct ieee80211_frame *)mp->b_rptr; iswep = wh->i_fc[1] & IEEE80211_FC1_WEP; keyix = HAL_TXKEYIX_INVALID; hdrlen = sizeof (struct ieee80211_frame); if (iswep != 0) { const struct ieee80211_cipher *cip; struct ieee80211_key *k; /* * Construct the 802.11 header+trailer for an encrypted * frame. The only reason this can fail is because of an * unknown or unsupported cipher/key type. */ k = ieee80211_crypto_encap(ic, mp); if (k == NULL) { ATH_DEBUG((ATH_DBG_AUX, "crypto_encap failed\n")); /* * This can happen when the key is yanked after the * frame was queued. Just discard the frame; the * 802.11 layer counts failures and provides * debugging/diagnostics. */ return (EIO); } cip = k->wk_cipher; /* * Adjust the packet + header lengths for the crypto * additions and calculate the h/w key index. When * a s/w mic is done the frame will have had any mic * added to it prior to entry so m0->m_pkthdr.len above will * account for it. Otherwise we need to add it to the * packet length. */ hdrlen += cip->ic_header; pktlen += cip->ic_trailer; if ((k->wk_flags & IEEE80211_KEY_SWMIC) == 0) pktlen += cip->ic_miclen; keyix = k->wk_keyix; /* packet header may have moved, reset our local pointer */ wh = (struct ieee80211_frame *)mp->b_rptr; } dest = bf->bf_dma.mem_va; for (; mp != NULL; mp = mp->b_cont) { mblen = MBLKL(mp); bcopy(mp->b_rptr, dest, mblen); dest += mblen; } mbslen = (uintptr_t)dest - (uintptr_t)bf->bf_dma.mem_va; pktlen += mbslen; bf->bf_in = in; /* setup descriptors */ ds = bf->bf_desc; rt = asc->asc_currates; ASSERT(rt != NULL); /* * The 802.11 layer marks whether or not we should * use short preamble based on the current mode and * negotiated parameters. */ if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && (in->in_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE)) { shortPreamble = AH_TRUE; asc->asc_stats.ast_tx_shortpre++; } else { shortPreamble = AH_FALSE; } an = ATH_NODE(in); /* * Calculate Atheros packet type from IEEE80211 packet header * and setup for rate calculations. */ switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) { case IEEE80211_FC0_TYPE_MGT: subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; if (subtype == IEEE80211_FC0_SUBTYPE_BEACON) atype = HAL_PKT_TYPE_BEACON; else if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) atype = HAL_PKT_TYPE_PROBE_RESP; else if (subtype == IEEE80211_FC0_SUBTYPE_ATIM) atype = HAL_PKT_TYPE_ATIM; else atype = HAL_PKT_TYPE_NORMAL; rix = 0; /* lowest rate */ try0 = ATH_TXMAXTRY; if (shortPreamble) txrate = an->an_tx_mgtratesp; else txrate = an->an_tx_mgtrate; /* force all ctl frames to highest queue */ txq = asc->asc_ac2q[WME_AC_VO]; break; case IEEE80211_FC0_TYPE_CTL: atype = HAL_PKT_TYPE_PSPOLL; subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; rix = 0; /* lowest rate */ try0 = ATH_TXMAXTRY; if (shortPreamble) txrate = an->an_tx_mgtratesp; else txrate = an->an_tx_mgtrate; /* force all ctl frames to highest queue */ txq = asc->asc_ac2q[WME_AC_VO]; break; case IEEE80211_FC0_TYPE_DATA: atype = HAL_PKT_TYPE_NORMAL; rix = an->an_tx_rix0; try0 = an->an_tx_try0; if (shortPreamble) txrate = an->an_tx_rate0sp; else txrate = an->an_tx_rate0; /* Always use background queue */ txq = asc->asc_ac2q[WME_AC_BK]; break; default: /* Unknown 802.11 frame */ asc->asc_stats.ast_tx_invalid++; return (1); } /* * Calculate miscellaneous flags. */ flags = HAL_TXDESC_CLRDMASK; if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { flags |= HAL_TXDESC_NOACK; /* no ack on broad/multicast */ asc->asc_stats.ast_tx_noack++; } else if (pktlen > ic->ic_rtsthreshold) { flags |= HAL_TXDESC_RTSENA; /* RTS based on frame length */ asc->asc_stats.ast_tx_rts++; } /* * Calculate duration. This logically belongs in the 802.11 * layer but it lacks sufficient information to calculate it. */ if ((flags & HAL_TXDESC_NOACK) == 0 && (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_CTL) { uint16_t dur; dur = ath_hal_computetxtime(ah, rt, IEEE80211_ACK_SIZE, rix, shortPreamble); /* LINTED E_BAD_PTR_CAST_ALIGN */ *(uint16_t *)wh->i_dur = LE_16(dur); } /* * Calculate RTS/CTS rate and duration if needed. */ ctsduration = 0; if (flags & (HAL_TXDESC_RTSENA|HAL_TXDESC_CTSENA)) { /* * CTS transmit rate is derived from the transmit rate * by looking in the h/w rate table. We must also factor * in whether or not a short preamble is to be used. */ cix = rt->info[rix].controlRate; ctsrate = rt->info[cix].rateCode; if (shortPreamble) ctsrate |= rt->info[cix].shortPreamble; /* * Compute the transmit duration based on the size * of an ACK frame. We call into the HAL to do the * computation since it depends on the characteristics * of the actual PHY being used. */ if (flags & HAL_TXDESC_RTSENA) { /* SIFS + CTS */ ctsduration += ath_hal_computetxtime(ah, rt, IEEE80211_ACK_SIZE, cix, shortPreamble); } /* SIFS + data */ ctsduration += ath_hal_computetxtime(ah, rt, pktlen, rix, shortPreamble); if ((flags & HAL_TXDESC_NOACK) == 0) { /* SIFS + ACK */ ctsduration += ath_hal_computetxtime(ah, rt, IEEE80211_ACK_SIZE, cix, shortPreamble); } } else ctsrate = 0; if (++txq->axq_intrcnt >= ATH_TXINTR_PERIOD) { flags |= HAL_TXDESC_INTREQ; txq->axq_intrcnt = 0; } /* * Formulate first tx descriptor with tx controls. */ ATH_HAL_SETUPTXDESC(ah, ds, pktlen, /* packet length */ hdrlen, /* header length */ atype, /* Atheros packet type */ MIN(in->in_txpower, 60), /* txpower */ txrate, try0, /* series 0 rate/tries */ keyix, /* key cache index */ an->an_tx_antenna, /* antenna mode */ flags, /* flags */ ctsrate, /* rts/cts rate */ ctsduration); /* rts/cts duration */ bf->bf_flags = flags; /* LINTED E_BAD_PTR_CAST_ALIGN */ ATH_DEBUG((ATH_DBG_SEND, "ath: ath_xmit(): to %s totlen=%d " "an->an_tx_rate1sp=%d tx_rate2sp=%d tx_rate3sp=%d " "qnum=%d rix=%d sht=%d dur = %d\n", ieee80211_macaddr_sprintf(wh->i_addr1), mbslen, an->an_tx_rate1sp, an->an_tx_rate2sp, an->an_tx_rate3sp, txq->axq_qnum, rix, shortPreamble, *(uint16_t *)wh->i_dur)); /* * Setup the multi-rate retry state only when we're * going to use it. This assumes ath_hal_setuptxdesc * initializes the descriptors (so we don't have to) * when the hardware supports multi-rate retry and * we don't use it. */ if (try0 != ATH_TXMAXTRY) ATH_HAL_SETUPXTXDESC(ah, ds, an->an_tx_rate1sp, 2, /* series 1 */ an->an_tx_rate2sp, 2, /* series 2 */ an->an_tx_rate3sp, 2); /* series 3 */ ds->ds_link = 0; ds->ds_data = bf->bf_dma.cookie.dmac_address; ATH_HAL_FILLTXDESC(ah, ds, mbslen, /* segment length */ AH_TRUE, /* first segment */ AH_TRUE, /* last segment */ ds); /* first descriptor */ ATH_DMA_SYNC(bf->bf_dma, DDI_DMA_SYNC_FORDEV); mutex_enter(&txq->axq_lock); list_insert_tail(&txq->axq_list, bf); if (txq->axq_link == NULL) { ATH_HAL_PUTTXBUF(ah, txq->axq_qnum, bf->bf_daddr); } else { *txq->axq_link = bf->bf_daddr; } txq->axq_link = &ds->ds_link; mutex_exit(&txq->axq_lock); ATH_HAL_TXSTART(ah, txq->axq_qnum); ic->ic_stats.is_tx_frags++; ic->ic_stats.is_tx_bytes += pktlen; return (0); } /* * Transmit a management frame. On failure we reclaim the skbuff. * Note that management frames come directly from the 802.11 layer * and do not honor the send queue flow control. Need to investigate * using priority queueing so management frames can bypass data. */ static int ath_xmit(ieee80211com_t *ic, mblk_t *mp, uint8_t type) { ath_t *asc = (ath_t *)ic; struct ath_hal *ah = asc->asc_ah; struct ieee80211_node *in = NULL; struct ath_buf *bf = NULL; struct ieee80211_frame *wh; int error = 0; ASSERT(mp->b_next == NULL); if (!ATH_IS_RUNNING(asc)) { if ((type & IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_DATA) { freemsg(mp); } return (ENXIO); } /* Grab a TX buffer */ mutex_enter(&asc->asc_txbuflock); bf = list_head(&asc->asc_txbuf_list); if (bf != NULL) list_remove(&asc->asc_txbuf_list, bf); if (list_empty(&asc->asc_txbuf_list)) { ATH_DEBUG((ATH_DBG_SEND, "ath: ath_mgmt_send(): " "stop queue\n")); asc->asc_stats.ast_tx_qstop++; } mutex_exit(&asc->asc_txbuflock); if (bf == NULL) { ATH_DEBUG((ATH_DBG_SEND, "ath: ath_mgmt_send(): discard, " "no xmit buf\n")); ic->ic_stats.is_tx_nobuf++; if ((type & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_DATA) { asc->asc_stats.ast_tx_nobuf++; mutex_enter(&asc->asc_resched_lock); asc->asc_resched_needed = B_TRUE; mutex_exit(&asc->asc_resched_lock); } else { asc->asc_stats.ast_tx_nobufmgt++; freemsg(mp); } return (ENOMEM); } wh = (struct ieee80211_frame *)mp->b_rptr; /* Locate node */ in = ieee80211_find_txnode(ic, wh->i_addr1); if (in == NULL) { error = EIO; goto bad; } in->in_inact = 0; switch (type & IEEE80211_FC0_TYPE_MASK) { case IEEE80211_FC0_TYPE_DATA: (void) ieee80211_encap(ic, mp, in); break; default: if ((wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) == IEEE80211_FC0_SUBTYPE_PROBE_RESP) { /* fill time stamp */ uint64_t tsf; uint32_t *tstamp; tsf = ATH_HAL_GETTSF64(ah); /* adjust 100us delay to xmit */ tsf += 100; /* LINTED E_BAD_PTR_CAST_ALIGN */ tstamp = (uint32_t *)&wh[1]; tstamp[0] = LE_32(tsf & 0xffffffff); tstamp[1] = LE_32(tsf >> 32); } asc->asc_stats.ast_tx_mgmt++; break; } error = ath_tx_start(asc, in, bf, mp); if (error != 0) { bad: ic->ic_stats.is_tx_failed++; if (bf != NULL) { mutex_enter(&asc->asc_txbuflock); list_insert_tail(&asc->asc_txbuf_list, bf); mutex_exit(&asc->asc_txbuflock); } } if (in != NULL) ieee80211_free_node(in); if ((type & IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_DATA || error == 0) { freemsg(mp); } return (error); } static mblk_t * ath_m_tx(void *arg, mblk_t *mp) { ath_t *asc = arg; ieee80211com_t *ic = (ieee80211com_t *)asc; mblk_t *next; int error = 0; /* * No data frames go out unless we're associated; this * should not happen as the 802.11 layer does not enable * the xmit queue until we enter the RUN state. */ if (ic->ic_state != IEEE80211_S_RUN) { ATH_DEBUG((ATH_DBG_SEND, "ath: ath_m_tx(): " "discard, state %u\n", ic->ic_state)); asc->asc_stats.ast_tx_discard++; freemsgchain(mp); return (NULL); } while (mp != NULL) { next = mp->b_next; mp->b_next = NULL; error = ath_xmit(ic, mp, IEEE80211_FC0_TYPE_DATA); if (error != 0) { mp->b_next = next; if (error == ENOMEM) { break; } else { freemsgchain(mp); /* CR6501759 issues */ return (NULL); } } mp = next; } return (mp); } static int ath_tx_processq(ath_t *asc, struct ath_txq *txq) { ieee80211com_t *ic = (ieee80211com_t *)asc; struct ath_hal *ah = asc->asc_ah; struct ath_buf *bf; struct ath_desc *ds; struct ieee80211_node *in; int32_t sr, lr, nacked = 0; struct ath_tx_status *ts; HAL_STATUS status; struct ath_node *an; for (;;) { mutex_enter(&txq->axq_lock); bf = list_head(&txq->axq_list); if (bf == NULL) { txq->axq_link = NULL; mutex_exit(&txq->axq_lock); break; } ds = bf->bf_desc; /* last decriptor */ ts = &bf->bf_status.ds_txstat; status = ATH_HAL_TXPROCDESC(ah, ds, ts); #ifdef DEBUG ath_printtxbuf(bf, status == HAL_OK); #endif if (status == HAL_EINPROGRESS) { mutex_exit(&txq->axq_lock); break; } list_remove(&txq->axq_list, bf); mutex_exit(&txq->axq_lock); in = bf->bf_in; if (in != NULL) { an = ATH_NODE(in); /* Successful transmition */ if (ts->ts_status == 0) { an->an_tx_ok++; an->an_tx_antenna = ts->ts_antenna; if (ts->ts_rate & HAL_TXSTAT_ALTRATE) asc->asc_stats.ast_tx_altrate++; asc->asc_stats.ast_tx_rssidelta = ts->ts_rssi - asc->asc_stats.ast_tx_rssi; asc->asc_stats.ast_tx_rssi = ts->ts_rssi; } else { an->an_tx_err++; if (ts->ts_status & HAL_TXERR_XRETRY) asc->asc_stats.ast_tx_xretries++; if (ts->ts_status & HAL_TXERR_FIFO) asc->asc_stats.ast_tx_fifoerr++; if (ts->ts_status & HAL_TXERR_FILT) asc->asc_stats.ast_tx_filtered++; an->an_tx_antenna = 0; /* invalidate */ } sr = ts->ts_shortretry; lr = ts->ts_longretry; asc->asc_stats.ast_tx_shortretry += sr; asc->asc_stats.ast_tx_longretry += lr; /* * Hand the descriptor to the rate control algorithm. */ if ((ts->ts_status & HAL_TXERR_FILT) == 0 && (bf->bf_flags & HAL_TXDESC_NOACK) == 0) { /* * If frame was ack'd update the last rx time * used to workaround phantom bmiss interrupts. */ if (ts->ts_status == 0) { nacked++; an->an_tx_ok++; } else { an->an_tx_err++; } an->an_tx_retr += sr + lr; } } bf->bf_in = NULL; mutex_enter(&asc->asc_txbuflock); list_insert_tail(&asc->asc_txbuf_list, bf); mutex_exit(&asc->asc_txbuflock); /* * Reschedule stalled outbound packets */ mutex_enter(&asc->asc_resched_lock); if (asc->asc_resched_needed) { asc->asc_resched_needed = B_FALSE; mac_tx_update(ic->ic_mach); } mutex_exit(&asc->asc_resched_lock); } return (nacked); } static void ath_tx_handler(ath_t *asc) { int i; /* * Process each active queue. */ for (i = 0; i < HAL_NUM_TX_QUEUES; i++) { if (ATH_TXQ_SETUP(asc, i)) { (void) ath_tx_processq(asc, &asc->asc_txq[i]); } } } static struct ieee80211_node * ath_node_alloc(ieee80211com_t *ic) { struct ath_node *an; ath_t *asc = (ath_t *)ic; an = kmem_zalloc(sizeof (struct ath_node), KM_SLEEP); ath_rate_update(asc, &an->an_node, 0); return (&an->an_node); } static void ath_node_free(struct ieee80211_node *in) { ieee80211com_t *ic = in->in_ic; ath_t *asc = (ath_t *)ic; struct ath_buf *bf; struct ath_txq *txq; int32_t i; for (i = 0; i < HAL_NUM_TX_QUEUES; i++) { if (ATH_TXQ_SETUP(asc, i)) { txq = &asc->asc_txq[i]; mutex_enter(&txq->axq_lock); bf = list_head(&txq->axq_list); while (bf != NULL) { if (bf->bf_in == in) { bf->bf_in = NULL; } bf = list_next(&txq->axq_list, bf); } mutex_exit(&txq->axq_lock); } } ic->ic_node_cleanup(in); if (in->in_wpa_ie != NULL) ieee80211_free(in->in_wpa_ie); kmem_free(in, sizeof (struct ath_node)); } static void ath_next_scan(void *arg) { ieee80211com_t *ic = arg; ath_t *asc = (ath_t *)ic; asc->asc_scan_timer = 0; if (ic->ic_state == IEEE80211_S_SCAN) { asc->asc_scan_timer = timeout(ath_next_scan, (void *)asc, drv_usectohz(ath_dwelltime * 1000)); ieee80211_next_scan(ic); } } static void ath_stop_scantimer(ath_t *asc) { timeout_id_t tmp_id = 0; while ((asc->asc_scan_timer != 0) && (tmp_id != asc->asc_scan_timer)) { tmp_id = asc->asc_scan_timer; (void) untimeout(tmp_id); } asc->asc_scan_timer = 0; } static int32_t ath_newstate(ieee80211com_t *ic, enum ieee80211_state nstate, int arg) { ath_t *asc = (ath_t *)ic; struct ath_hal *ah = asc->asc_ah; struct ieee80211_node *in; int32_t i, error; uint8_t *bssid; uint32_t rfilt; enum ieee80211_state ostate; static const HAL_LED_STATE leds[] = { HAL_LED_INIT, /* IEEE80211_S_INIT */ HAL_LED_SCAN, /* IEEE80211_S_SCAN */ HAL_LED_AUTH, /* IEEE80211_S_AUTH */ HAL_LED_ASSOC, /* IEEE80211_S_ASSOC */ HAL_LED_RUN, /* IEEE80211_S_RUN */ }; if (!ATH_IS_RUNNING(asc)) return (0); ostate = ic->ic_state; if (nstate != IEEE80211_S_SCAN) ath_stop_scantimer(asc); ATH_LOCK(asc); ATH_HAL_SETLEDSTATE(ah, leds[nstate]); /* set LED */ if (nstate == IEEE80211_S_INIT) { asc->asc_imask &= ~(HAL_INT_SWBA | HAL_INT_BMISS); /* * Disable interrupts. */ ATH_HAL_INTRSET(ah, asc->asc_imask &~ HAL_INT_GLOBAL); ATH_UNLOCK(asc); goto done; } in = ic->ic_bss; error = ath_chan_set(asc, ic->ic_curchan); if (error != 0) { if (nstate != IEEE80211_S_SCAN) { ATH_UNLOCK(asc); ieee80211_reset_chan(ic); goto bad; } } rfilt = ath_calcrxfilter(asc); if (nstate == IEEE80211_S_SCAN) bssid = ic->ic_macaddr; else bssid = in->in_bssid; ATH_HAL_SETRXFILTER(ah, rfilt); if (nstate == IEEE80211_S_RUN && ic->ic_opmode != IEEE80211_M_IBSS) ATH_HAL_SETASSOCID(ah, bssid, in->in_associd); else ATH_HAL_SETASSOCID(ah, bssid, 0); if (ic->ic_flags & IEEE80211_F_PRIVACY) { for (i = 0; i < IEEE80211_WEP_NKID; i++) { if (ATH_HAL_KEYISVALID(ah, i)) ATH_HAL_KEYSETMAC(ah, i, bssid); } } if ((nstate == IEEE80211_S_RUN) && (ostate != IEEE80211_S_RUN)) { /* Configure the beacon and sleep timers. */ ath_beacon_config(asc); } else { asc->asc_imask &= ~(HAL_INT_SWBA | HAL_INT_BMISS); ATH_HAL_INTRSET(ah, asc->asc_imask); } /* * Reset the rate control state. */ ath_rate_ctl_reset(asc, nstate); ATH_UNLOCK(asc); done: /* * Invoke the parent method to complete the work. */ error = asc->asc_newstate(ic, nstate, arg); /* * Finally, start any timers. */ if (nstate == IEEE80211_S_RUN) { ieee80211_start_watchdog(ic, 1); } else if ((nstate == IEEE80211_S_SCAN) && (ostate != nstate)) { /* start ap/neighbor scan timer */ ASSERT(asc->asc_scan_timer == 0); asc->asc_scan_timer = timeout(ath_next_scan, (void *)asc, drv_usectohz(ath_dwelltime * 1000)); } bad: return (error); } /* * Periodically recalibrate the PHY to account * for temperature/environment changes. */ static void ath_calibrate(ath_t *asc) { struct ath_hal *ah = asc->asc_ah; HAL_BOOL iqcaldone; asc->asc_stats.ast_per_cal++; if (ATH_HAL_GETRFGAIN(ah) == HAL_RFGAIN_NEED_CHANGE) { /* * Rfgain is out of bounds, reset the chip * to load new gain values. */ ATH_DEBUG((ATH_DBG_HAL, "ath: ath_calibrate(): " "Need change RFgain\n")); asc->asc_stats.ast_per_rfgain++; (void) ath_reset(&asc->asc_isc); } if (!ATH_HAL_CALIBRATE(ah, &asc->asc_curchan, &iqcaldone)) { ATH_DEBUG((ATH_DBG_HAL, "ath: ath_calibrate(): " "calibration of channel %u failed\n", asc->asc_curchan.channel)); asc->asc_stats.ast_per_calfail++; } } static void ath_watchdog(void *arg) { ath_t *asc = arg; ieee80211com_t *ic = &asc->asc_isc; int ntimer = 0; ATH_LOCK(asc); ic->ic_watchdog_timer = 0; if (!ATH_IS_RUNNING(asc)) { ATH_UNLOCK(asc); return; } if (ic->ic_state == IEEE80211_S_RUN) { /* periodic recalibration */ ath_calibrate(asc); /* * Start the background rate control thread if we * are not configured to use a fixed xmit rate. */ if (ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE) { asc->asc_stats.ast_rate_calls ++; if (ic->ic_opmode == IEEE80211_M_STA) ath_rate_ctl(ic, ic->ic_bss); else ieee80211_iterate_nodes(&ic->ic_sta, ath_rate_ctl, asc); } ntimer = 1; } ATH_UNLOCK(asc); ieee80211_watchdog(ic); if (ntimer != 0) ieee80211_start_watchdog(ic, ntimer); } static void ath_tx_proc(void *arg) { ath_t *asc = arg; ath_tx_handler(asc); } static uint_t ath_intr(caddr_t arg) { /* LINTED E_BAD_PTR_CAST_ALIGN */ ath_t *asc = (ath_t *)arg; struct ath_hal *ah = asc->asc_ah; HAL_INT status; ieee80211com_t *ic = (ieee80211com_t *)asc; ATH_LOCK(asc); if (!ATH_IS_RUNNING(asc)) { /* * The hardware is not ready/present, don't touch anything. * Note this can happen early on if the IRQ is shared. */ ATH_UNLOCK(asc); return (DDI_INTR_UNCLAIMED); } if (!ATH_HAL_INTRPEND(ah)) { /* shared irq, not for us */ ATH_UNLOCK(asc); return (DDI_INTR_UNCLAIMED); } ATH_HAL_GETISR(ah, &status); status &= asc->asc_imask; if (status & HAL_INT_FATAL) { asc->asc_stats.ast_hardware++; goto reset; } else if (status & HAL_INT_RXORN) { asc->asc_stats.ast_rxorn++; goto reset; } else { if (status & HAL_INT_RXEOL) { asc->asc_stats.ast_rxeol++; asc->asc_rxlink = NULL; } if (status & HAL_INT_TXURN) { asc->asc_stats.ast_txurn++; ATH_HAL_UPDATETXTRIGLEVEL(ah, AH_TRUE); } if (status & HAL_INT_RX) { asc->asc_rx_pend = 1; ddi_trigger_softintr(asc->asc_softint_id); } if (status & HAL_INT_TX) { if (ddi_taskq_dispatch(asc->asc_tq, ath_tx_proc, asc, DDI_NOSLEEP) != DDI_SUCCESS) { ath_problem("ath: ath_intr(): " "No memory available for tx taskq\n"); } } ATH_UNLOCK(asc); if (status & HAL_INT_SWBA) { /* This will occur only in Host-AP or Ad-Hoc mode */ return (DDI_INTR_CLAIMED); } if (status & HAL_INT_BMISS) { if (ic->ic_state == IEEE80211_S_RUN) { (void) ieee80211_new_state(ic, IEEE80211_S_ASSOC, -1); } } } return (DDI_INTR_CLAIMED); reset: (void) ath_reset(ic); ATH_UNLOCK(asc); return (DDI_INTR_CLAIMED); } static uint_t ath_softint_handler(caddr_t data) { /* LINTED E_BAD_PTR_CAST_ALIGN */ ath_t *asc = (ath_t *)data; /* * Check if the soft interrupt is triggered by another * driver at the same level. */ ATH_LOCK(asc); if (asc->asc_rx_pend) { /* Soft interrupt for this driver */ asc->asc_rx_pend = 0; ATH_UNLOCK(asc); ath_rx_handler(asc); return (DDI_INTR_CLAIMED); } ATH_UNLOCK(asc); return (DDI_INTR_UNCLAIMED); } /* * following are gld callback routine * ath_gld_send, ath_gld_ioctl, ath_gld_gstat * are listed in other corresponding sections. * reset the hardware w/o losing operational state. this is * basically a more efficient way of doing ath_gld_stop, ath_gld_start, * followed by state transitions to the current 802.11 * operational state. used to recover from errors rx overrun * and to reset the hardware when rf gain settings must be reset. */ static void ath_stop_locked(ath_t *asc) { ieee80211com_t *ic = (ieee80211com_t *)asc; struct ath_hal *ah = asc->asc_ah; ATH_LOCK_ASSERT(asc); if (!asc->asc_isrunning) return; /* * Shutdown the hardware and driver: * reset 802.11 state machine * turn off timers * disable interrupts * turn off the radio * clear transmit machinery * clear receive machinery * drain and release tx queues * reclaim beacon resources * power down hardware * * Note that some of this work is not possible if the * hardware is gone (invalid). */ ATH_UNLOCK(asc); ieee80211_new_state(ic, IEEE80211_S_INIT, -1); ieee80211_stop_watchdog(ic); ATH_LOCK(asc); ATH_HAL_INTRSET(ah, 0); ath_draintxq(asc); if (!asc->asc_invalid) { ath_stoprecv(asc); ATH_HAL_PHYDISABLE(ah); } else { asc->asc_rxlink = NULL; } asc->asc_isrunning = 0; } static void ath_m_stop(void *arg) { ath_t *asc = arg; struct ath_hal *ah = asc->asc_ah; ATH_LOCK(asc); ath_stop_locked(asc); ATH_HAL_SETPOWER(ah, HAL_PM_AWAKE); asc->asc_invalid = 1; ATH_UNLOCK(asc); } static int ath_start_locked(ath_t *asc) { ieee80211com_t *ic = (ieee80211com_t *)asc; struct ath_hal *ah = asc->asc_ah; HAL_STATUS status; ATH_LOCK_ASSERT(asc); /* * The basic interface to setting the hardware in a good * state is ``reset''. On return the hardware is known to * be powered up and with interrupts disabled. This must * be followed by initialization of the appropriate bits * and then setup of the interrupt mask. */ asc->asc_curchan.channel = ic->ic_curchan->ich_freq; asc->asc_curchan.channelFlags = ath_chan2flags(ic, ic->ic_curchan); if (!ATH_HAL_RESET(ah, (HAL_OPMODE)ic->ic_opmode, &asc->asc_curchan, AH_FALSE, &status)) { ATH_DEBUG((ATH_DBG_HAL, "ath: ath_m_start(): " "reset hardware failed: '%s' (HAL status %u)\n", ath_get_hal_status_desc(status), status)); return (ENOTACTIVE); } (void) ath_startrecv(asc); /* * Enable interrupts. */ asc->asc_imask = HAL_INT_RX | HAL_INT_TX | HAL_INT_RXEOL | HAL_INT_RXORN | HAL_INT_FATAL | HAL_INT_GLOBAL; ATH_HAL_INTRSET(ah, asc->asc_imask); /* * The hardware should be ready to go now so it's safe * to kick the 802.11 state machine as it's likely to * immediately call back to us to send mgmt frames. */ ath_chan_change(asc, ic->ic_curchan); asc->asc_isrunning = 1; return (0); } int ath_m_start(void *arg) { ath_t *asc = arg; int err; ATH_LOCK(asc); /* * Stop anything previously setup. This is safe * whether this is the first time through or not. */ ath_stop_locked(asc); if ((err = ath_start_locked(asc)) != 0) { ATH_UNLOCK(asc); return (err); } asc->asc_invalid = 0; ATH_UNLOCK(asc); return (0); } static int ath_m_unicst(void *arg, const uint8_t *macaddr) { ath_t *asc = arg; struct ath_hal *ah = asc->asc_ah; ATH_DEBUG((ATH_DBG_GLD, "ath: ath_gld_saddr(): " "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", macaddr[0], macaddr[1], macaddr[2], macaddr[3], macaddr[4], macaddr[5])); ATH_LOCK(asc); IEEE80211_ADDR_COPY(asc->asc_isc.ic_macaddr, macaddr); ATH_HAL_SETMAC(ah, asc->asc_isc.ic_macaddr); (void) ath_reset(&asc->asc_isc); ATH_UNLOCK(asc); return (0); } static int ath_m_promisc(void *arg, boolean_t on) { ath_t *asc = arg; struct ath_hal *ah = asc->asc_ah; uint32_t rfilt; ATH_LOCK(asc); rfilt = ATH_HAL_GETRXFILTER(ah); if (on) rfilt |= HAL_RX_FILTER_PROM; else rfilt &= ~HAL_RX_FILTER_PROM; asc->asc_promisc = on; ATH_HAL_SETRXFILTER(ah, rfilt); ATH_UNLOCK(asc); return (0); } static int ath_m_multicst(void *arg, boolean_t add, const uint8_t *mca) { ath_t *asc = arg; struct ath_hal *ah = asc->asc_ah; uint32_t val, index, bit; uint8_t pos; uint32_t *mfilt = asc->asc_mcast_hash; ATH_LOCK(asc); /* calculate XOR of eight 6bit values */ val = ATH_LE_READ_4(mca + 0); pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; val = ATH_LE_READ_4(mca + 3); pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; pos &= 0x3f; index = pos / 32; bit = 1 << (pos % 32); if (add) { /* enable multicast */ asc->asc_mcast_refs[pos]++; mfilt[index] |= bit; } else { /* disable multicast */ if (--asc->asc_mcast_refs[pos] == 0) mfilt[index] &= ~bit; } ATH_HAL_SETMCASTFILTER(ah, mfilt[0], mfilt[1]); ATH_UNLOCK(asc); return (0); } /* * callback functions for /get/set properties */ static int ath_m_setprop(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num, uint_t wldp_length, const void *wldp_buf) { ath_t *asc = arg; int err; err = ieee80211_setprop(&asc->asc_isc, pr_name, wldp_pr_num, wldp_length, wldp_buf); ATH_LOCK(asc); if (err == ENETRESET) { if (ATH_IS_RUNNING(asc)) { ATH_UNLOCK(asc); (void) ath_m_start(asc); (void) ieee80211_new_state(&asc->asc_isc, IEEE80211_S_SCAN, -1); ATH_LOCK(asc); } err = 0; } ATH_UNLOCK(asc); return (err); } static int ath_m_getprop(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num, uint_t wldp_length, void *wldp_buf) { ath_t *asc = arg; int err = 0; err = ieee80211_getprop(&asc->asc_isc, pr_name, wldp_pr_num, wldp_length, wldp_buf); return (err); } static void ath_m_propinfo(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num, mac_prop_info_handle_t mph) { ath_t *asc = arg; ieee80211_propinfo(&asc->asc_isc, pr_name, wldp_pr_num, mph); } static void ath_m_ioctl(void *arg, queue_t *wq, mblk_t *mp) { ath_t *asc = arg; int32_t err; err = ieee80211_ioctl(&asc->asc_isc, wq, mp); ATH_LOCK(asc); if (err == ENETRESET) { if (ATH_IS_RUNNING(asc)) { ATH_UNLOCK(asc); (void) ath_m_start(asc); (void) ieee80211_new_state(&asc->asc_isc, IEEE80211_S_SCAN, -1); ATH_LOCK(asc); } } ATH_UNLOCK(asc); } static int ath_m_stat(void *arg, uint_t stat, uint64_t *val) { ath_t *asc = arg; ieee80211com_t *ic = (ieee80211com_t *)asc; struct ieee80211_node *in = ic->ic_bss; struct ieee80211_rateset *rs = &in->in_rates; ATH_LOCK(asc); switch (stat) { case MAC_STAT_IFSPEED: *val = (rs->ir_rates[in->in_txrate] & IEEE80211_RATE_VAL) / 2 * 1000000ull; break; case MAC_STAT_NOXMTBUF: *val = asc->asc_stats.ast_tx_nobuf + asc->asc_stats.ast_tx_nobufmgt; break; case MAC_STAT_IERRORS: *val = asc->asc_stats.ast_rx_tooshort; break; case MAC_STAT_RBYTES: *val = ic->ic_stats.is_rx_bytes; break; case MAC_STAT_IPACKETS: *val = ic->ic_stats.is_rx_frags; break; case MAC_STAT_OBYTES: *val = ic->ic_stats.is_tx_bytes; break; case MAC_STAT_OPACKETS: *val = ic->ic_stats.is_tx_frags; break; case MAC_STAT_OERRORS: case WIFI_STAT_TX_FAILED: *val = asc->asc_stats.ast_tx_fifoerr + asc->asc_stats.ast_tx_xretries + asc->asc_stats.ast_tx_discard; break; case WIFI_STAT_TX_RETRANS: *val = asc->asc_stats.ast_tx_xretries; break; case WIFI_STAT_FCS_ERRORS: *val = asc->asc_stats.ast_rx_crcerr; break; case WIFI_STAT_WEP_ERRORS: *val = asc->asc_stats.ast_rx_badcrypt; break; case WIFI_STAT_TX_FRAGS: case WIFI_STAT_MCAST_TX: case WIFI_STAT_RTS_SUCCESS: case WIFI_STAT_RTS_FAILURE: case WIFI_STAT_ACK_FAILURE: case WIFI_STAT_RX_FRAGS: case WIFI_STAT_MCAST_RX: case WIFI_STAT_RX_DUPS: ATH_UNLOCK(asc); return (ieee80211_stat(ic, stat, val)); default: ATH_UNLOCK(asc); return (ENOTSUP); } ATH_UNLOCK(asc); return (0); } static int ath_pci_setup(ath_t *asc) { uint16_t command; /* * Enable memory mapping and bus mastering */ ASSERT(asc != NULL); command = pci_config_get16(asc->asc_cfg_handle, PCI_CONF_COMM); command |= PCI_COMM_MAE | PCI_COMM_ME; pci_config_put16(asc->asc_cfg_handle, PCI_CONF_COMM, command); command = pci_config_get16(asc->asc_cfg_handle, PCI_CONF_COMM); if ((command & PCI_COMM_MAE) == 0) { ath_problem("ath: ath_pci_setup(): " "failed to enable memory mapping\n"); return (EIO); } if ((command & PCI_COMM_ME) == 0) { ath_problem("ath: ath_pci_setup(): " "failed to enable bus mastering\n"); return (EIO); } ATH_DEBUG((ATH_DBG_INIT, "ath: ath_pci_setup(): " "set command reg to 0x%x \n", command)); return (0); } static int ath_resume(dev_info_t *devinfo) { ath_t *asc; int ret = DDI_SUCCESS; asc = ddi_get_soft_state(ath_soft_state_p, ddi_get_instance(devinfo)); if (asc == NULL) { ATH_DEBUG((ATH_DBG_SUSPEND, "ath: ath_resume(): " "failed to get soft state\n")); return (DDI_FAILURE); } ATH_LOCK(asc); /* * Set up config space command register(s). Refuse * to resume on failure. */ if (ath_pci_setup(asc) != 0) { ATH_DEBUG((ATH_DBG_SUSPEND, "ath: ath_resume(): " "ath_pci_setup() failed\n")); ATH_UNLOCK(asc); return (DDI_FAILURE); } if (!asc->asc_invalid) ret = ath_start_locked(asc); ATH_UNLOCK(asc); return (ret); } static int ath_attach(dev_info_t *devinfo, ddi_attach_cmd_t cmd) { ath_t *asc; ieee80211com_t *ic; struct ath_hal *ah; uint8_t csz; HAL_STATUS status; caddr_t regs; uint32_t i, val; uint16_t vendor_id, device_id; const char *athname; int32_t ath_countrycode = CTRY_DEFAULT; /* country code */ int32_t err, ath_regdomain = 0; /* regulatory domain */ char strbuf[32]; int instance; wifi_data_t wd = { 0 }; mac_register_t *macp; switch (cmd) { case DDI_ATTACH: break; case DDI_RESUME: return (ath_resume(devinfo)); default: return (DDI_FAILURE); } instance = ddi_get_instance(devinfo); if (ddi_soft_state_zalloc(ath_soft_state_p, instance) != DDI_SUCCESS) { ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "Unable to alloc softstate\n")); return (DDI_FAILURE); } asc = ddi_get_soft_state(ath_soft_state_p, ddi_get_instance(devinfo)); ic = (ieee80211com_t *)asc; asc->asc_dev = devinfo; mutex_init(&asc->asc_genlock, NULL, MUTEX_DRIVER, NULL); mutex_init(&asc->asc_txbuflock, NULL, MUTEX_DRIVER, NULL); mutex_init(&asc->asc_rxbuflock, NULL, MUTEX_DRIVER, NULL); mutex_init(&asc->asc_resched_lock, NULL, MUTEX_DRIVER, NULL); err = pci_config_setup(devinfo, &asc->asc_cfg_handle); if (err != DDI_SUCCESS) { ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "pci_config_setup() failed")); goto attach_fail0; } if (ath_pci_setup(asc) != 0) goto attach_fail1; /* * Cache line size is used to size and align various * structures used to communicate with the hardware. */ csz = pci_config_get8(asc->asc_cfg_handle, PCI_CONF_CACHE_LINESZ); if (csz == 0) { /* * We must have this setup properly for rx buffer * DMA to work so force a reasonable value here if it * comes up zero. */ csz = ATH_DEF_CACHE_BYTES / sizeof (uint32_t); pci_config_put8(asc->asc_cfg_handle, PCI_CONF_CACHE_LINESZ, csz); } asc->asc_cachelsz = csz << 2; vendor_id = pci_config_get16(asc->asc_cfg_handle, PCI_CONF_VENID); device_id = pci_config_get16(asc->asc_cfg_handle, PCI_CONF_DEVID); ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): vendor 0x%x, " "device id 0x%x, cache size %d\n", vendor_id, device_id, csz)); athname = ath_hal_probe(vendor_id, device_id); ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): athname: %s\n", athname ? athname : "Atheros ???")); pci_config_put8(asc->asc_cfg_handle, PCI_CONF_LATENCY_TIMER, 0xa8); val = pci_config_get32(asc->asc_cfg_handle, 0x40); if ((val & 0x0000ff00) != 0) pci_config_put32(asc->asc_cfg_handle, 0x40, val & 0xffff00ff); err = ddi_regs_map_setup(devinfo, 1, ®s, 0, 0, &ath_reg_accattr, &asc->asc_io_handle); ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "regs map1 = %x err=%d\n", regs, err)); if (err != DDI_SUCCESS) { ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "ddi_regs_map_setup() failed")); goto attach_fail1; } ah = ath_hal_attach(device_id, asc, 0, regs, &status); if (ah == NULL) { ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "unable to attach hw: '%s' (HAL status %u)\n", ath_get_hal_status_desc(status), status)); goto attach_fail2; } ATH_DEBUG((ATH_DBG_ATTACH, "mac %d.%d phy %d.%d", ah->ah_macVersion, ah->ah_macRev, ah->ah_phyRev >> 4, ah->ah_phyRev & 0xf)); ATH_HAL_INTRSET(ah, 0); asc->asc_ah = ah; if (ah->ah_abi != HAL_ABI_VERSION) { ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "HAL ABI mismatch detected (0x%x != 0x%x)\n", ah->ah_abi, HAL_ABI_VERSION)); goto attach_fail3; } ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "HAL ABI version 0x%x\n", ah->ah_abi)); ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "HAL mac version %d.%d, phy version %d.%d\n", ah->ah_macVersion, ah->ah_macRev, ah->ah_phyRev >> 4, ah->ah_phyRev & 0xf)); if (ah->ah_analog5GhzRev) ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "HAL 5ghz radio version %d.%d\n", ah->ah_analog5GhzRev >> 4, ah->ah_analog5GhzRev & 0xf)); if (ah->ah_analog2GhzRev) ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "HAL 2ghz radio version %d.%d\n", ah->ah_analog2GhzRev >> 4, ah->ah_analog2GhzRev & 0xf)); /* * Check if the MAC has multi-rate retry support. * We do this by trying to setup a fake extended * descriptor. MAC's that don't have support will * return false w/o doing anything. MAC's that do * support it will return true w/o doing anything. */ asc->asc_mrretry = ATH_HAL_SETUPXTXDESC(ah, NULL, 0, 0, 0, 0, 0, 0); ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "multi rate retry support=%x\n", asc->asc_mrretry)); /* * Get the hardware key cache size. */ asc->asc_keymax = ATH_HAL_KEYCACHESIZE(ah); if (asc->asc_keymax > sizeof (asc->asc_keymap) * NBBY) { ATH_DEBUG((ATH_DBG_ATTACH, "ath_attach:" " Warning, using only %u entries in %u key cache\n", sizeof (asc->asc_keymap) * NBBY, asc->asc_keymax)); asc->asc_keymax = sizeof (asc->asc_keymap) * NBBY; } /* * Reset the key cache since some parts do not * reset the contents on initial power up. */ for (i = 0; i < asc->asc_keymax; i++) ATH_HAL_KEYRESET(ah, i); ATH_HAL_GETREGDOMAIN(ah, (uint32_t *)&ath_regdomain); ATH_HAL_GETCOUNTRYCODE(ah, &ath_countrycode); /* * Collect the channel list using the default country * code and including outdoor channels. The 802.11 layer * is resposible for filtering this list to a set of * channels that it considers ok to use. */ asc->asc_have11g = 0; /* enable outdoor use, enable extended channels */ err = ath_getchannels(asc, ath_countrycode, AH_FALSE, AH_TRUE); if (err != 0) goto attach_fail3; /* * Setup rate tables for all potential media types. */ ath_rate_setup(asc, IEEE80211_MODE_11A); ath_rate_setup(asc, IEEE80211_MODE_11B); ath_rate_setup(asc, IEEE80211_MODE_11G); ath_rate_setup(asc, IEEE80211_MODE_TURBO_A); /* Setup here so ath_rate_update is happy */ ath_setcurmode(asc, IEEE80211_MODE_11A); err = ath_desc_alloc(devinfo, asc); if (err != DDI_SUCCESS) { ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "failed to allocate descriptors: %d\n", err)); goto attach_fail3; } if ((asc->asc_tq = ddi_taskq_create(devinfo, "ath_taskq", 1, TASKQ_DEFAULTPRI, 0)) == NULL) { goto attach_fail4; } /* Setup transmit queues in the HAL */ if (ath_txq_setup(asc)) goto attach_fail4; ATH_HAL_GETMAC(ah, ic->ic_macaddr); /* * Initialize pointers to device specific functions which * will be used by the generic layer. */ /* 11g support is identified when we fetch the channel set */ if (asc->asc_have11g) ic->ic_caps |= IEEE80211_C_SHPREAMBLE | IEEE80211_C_SHSLOT; /* short slot time */ /* * Query the hal to figure out h/w crypto support. */ if (ATH_HAL_CIPHERSUPPORTED(ah, HAL_CIPHER_WEP)) ic->ic_caps |= IEEE80211_C_WEP; if (ATH_HAL_CIPHERSUPPORTED(ah, HAL_CIPHER_AES_OCB)) ic->ic_caps |= IEEE80211_C_AES; if (ATH_HAL_CIPHERSUPPORTED(ah, HAL_CIPHER_AES_CCM)) { ATH_DEBUG((ATH_DBG_ATTACH, "Atheros support H/W CCMP\n")); ic->ic_caps |= IEEE80211_C_AES_CCM; } if (ATH_HAL_CIPHERSUPPORTED(ah, HAL_CIPHER_CKIP)) ic->ic_caps |= IEEE80211_C_CKIP; if (ATH_HAL_CIPHERSUPPORTED(ah, HAL_CIPHER_TKIP)) { ATH_DEBUG((ATH_DBG_ATTACH, "Atheros support H/W TKIP\n")); ic->ic_caps |= IEEE80211_C_TKIP; /* * Check if h/w does the MIC and/or whether the * separate key cache entries are required to * handle both tx+rx MIC keys. */ if (ATH_HAL_CIPHERSUPPORTED(ah, HAL_CIPHER_MIC)) { ATH_DEBUG((ATH_DBG_ATTACH, "Support H/W TKIP MIC\n")); ic->ic_caps |= IEEE80211_C_TKIPMIC; } /* * If the h/w supports storing tx+rx MIC keys * in one cache slot automatically enable use. */ if (ATH_HAL_HASTKIPSPLIT(ah) || !ATH_HAL_SETTKIPSPLIT(ah, AH_FALSE)) { asc->asc_splitmic = 1; } } ic->ic_caps |= IEEE80211_C_WPA; /* Support WPA/WPA2 */ asc->asc_hasclrkey = ATH_HAL_CIPHERSUPPORTED(ah, HAL_CIPHER_CLR); /* * Mark key cache slots associated with global keys * as in use. If we knew TKIP was not to be used we * could leave the +32, +64, and +32+64 slots free. */ for (i = 0; i < IEEE80211_WEP_NKID; i++) { setbit(asc->asc_keymap, i); setbit(asc->asc_keymap, i+64); if (asc->asc_splitmic) { setbit(asc->asc_keymap, i+32); setbit(asc->asc_keymap, i+32+64); } } ic->ic_phytype = IEEE80211_T_OFDM; ic->ic_opmode = IEEE80211_M_STA; ic->ic_state = IEEE80211_S_INIT; ic->ic_maxrssi = ATH_MAX_RSSI; ic->ic_set_shortslot = ath_set_shortslot; ic->ic_xmit = ath_xmit; ieee80211_attach(ic); /* different instance has different WPA door */ (void) snprintf(ic->ic_wpadoor, MAX_IEEE80211STR, "%s_%s%d", WPA_DOOR, ddi_driver_name(devinfo), ddi_get_instance(devinfo)); /* Override 80211 default routines */ ic->ic_reset = ath_reset; asc->asc_newstate = ic->ic_newstate; ic->ic_newstate = ath_newstate; ic->ic_watchdog = ath_watchdog; ic->ic_node_alloc = ath_node_alloc; ic->ic_node_free = ath_node_free; ic->ic_crypto.cs_key_alloc = ath_key_alloc; ic->ic_crypto.cs_key_delete = ath_key_delete; ic->ic_crypto.cs_key_set = ath_key_set; ieee80211_media_init(ic); /* * initialize default tx key */ ic->ic_def_txkey = 0; asc->asc_rx_pend = 0; ATH_HAL_INTRSET(ah, 0); err = ddi_add_softintr(devinfo, DDI_SOFTINT_LOW, &asc->asc_softint_id, NULL, 0, ath_softint_handler, (caddr_t)asc); if (err != DDI_SUCCESS) { ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "ddi_add_softintr() failed\n")); goto attach_fail5; } if (ddi_get_iblock_cookie(devinfo, 0, &asc->asc_iblock) != DDI_SUCCESS) { ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "Can not get iblock cookie for INT\n")); goto attach_fail6; } if (ddi_add_intr(devinfo, 0, NULL, NULL, ath_intr, (caddr_t)asc) != DDI_SUCCESS) { ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "Can not set intr for ATH driver\n")); goto attach_fail6; } /* * Provide initial settings for the WiFi plugin; whenever this * information changes, we need to call mac_plugindata_update() */ wd.wd_opmode = ic->ic_opmode; wd.wd_secalloc = WIFI_SEC_NONE; IEEE80211_ADDR_COPY(wd.wd_bssid, ic->ic_bss->in_bssid); if ((macp = mac_alloc(MAC_VERSION)) == NULL) { ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "MAC version mismatch\n")); goto attach_fail7; } macp->m_type_ident = MAC_PLUGIN_IDENT_WIFI; macp->m_driver = asc; macp->m_dip = devinfo; macp->m_src_addr = ic->ic_macaddr; macp->m_callbacks = &ath_m_callbacks; macp->m_min_sdu = 0; macp->m_max_sdu = IEEE80211_MTU; macp->m_pdata = &wd; macp->m_pdata_size = sizeof (wd); err = mac_register(macp, &ic->ic_mach); mac_free(macp); if (err != 0) { ATH_DEBUG((ATH_DBG_ATTACH, "ath: ath_attach(): " "mac_register err %x\n", err)); goto attach_fail7; } /* Create minor node of type DDI_NT_NET_WIFI */ (void) snprintf(strbuf, sizeof (strbuf), "%s%d", ATH_NODENAME, instance); err = ddi_create_minor_node(devinfo, strbuf, S_IFCHR, instance + 1, DDI_NT_NET_WIFI, 0); if (err != DDI_SUCCESS) ATH_DEBUG((ATH_DBG_ATTACH, "WARN: ath: ath_attach(): " "Create minor node failed - %d\n", err)); mac_link_update(ic->ic_mach, LINK_STATE_DOWN); asc->asc_invalid = 1; asc->asc_isrunning = 0; asc->asc_promisc = B_FALSE; bzero(asc->asc_mcast_refs, sizeof (asc->asc_mcast_refs)); bzero(asc->asc_mcast_hash, sizeof (asc->asc_mcast_hash)); return (DDI_SUCCESS); attach_fail7: ddi_remove_intr(devinfo, 0, asc->asc_iblock); attach_fail6: ddi_remove_softintr(asc->asc_softint_id); attach_fail5: (void) ieee80211_detach(ic); attach_fail4: ath_desc_free(asc); if (asc->asc_tq) ddi_taskq_destroy(asc->asc_tq); attach_fail3: ah->ah_detach(asc->asc_ah); attach_fail2: ddi_regs_map_free(&asc->asc_io_handle); attach_fail1: pci_config_teardown(&asc->asc_cfg_handle); attach_fail0: asc->asc_invalid = 1; mutex_destroy(&asc->asc_txbuflock); for (i = 0; i < HAL_NUM_TX_QUEUES; i++) { if (ATH_TXQ_SETUP(asc, i)) { struct ath_txq *txq = &asc->asc_txq[i]; mutex_destroy(&txq->axq_lock); } } mutex_destroy(&asc->asc_rxbuflock); mutex_destroy(&asc->asc_genlock); mutex_destroy(&asc->asc_resched_lock); ddi_soft_state_free(ath_soft_state_p, instance); return (DDI_FAILURE); } /* * Suspend transmit/receive for powerdown */ static int ath_suspend(ath_t *asc) { ATH_LOCK(asc); ath_stop_locked(asc); ATH_UNLOCK(asc); ATH_DEBUG((ATH_DBG_SUSPEND, "ath: suspended.\n")); return (DDI_SUCCESS); } static int32_t ath_detach(dev_info_t *devinfo, ddi_detach_cmd_t cmd) { ath_t *asc; asc = ddi_get_soft_state(ath_soft_state_p, ddi_get_instance(devinfo)); ASSERT(asc != NULL); switch (cmd) { case DDI_DETACH: break; case DDI_SUSPEND: return (ath_suspend(asc)); default: return (DDI_FAILURE); } if (mac_disable(asc->asc_isc.ic_mach) != 0) return (DDI_FAILURE); ath_stop_scantimer(asc); /* disable interrupts */ ATH_HAL_INTRSET(asc->asc_ah, 0); /* * Unregister from the MAC layer subsystem */ (void) mac_unregister(asc->asc_isc.ic_mach); /* free intterrupt resources */ ddi_remove_intr(devinfo, 0, asc->asc_iblock); ddi_remove_softintr(asc->asc_softint_id); /* * NB: the order of these is important: * o call the 802.11 layer before detaching the hal to * insure callbacks into the driver to delete global * key cache entries can be handled * o reclaim the tx queue data structures after calling * the 802.11 layer as we'll get called back to reclaim * node state and potentially want to use them * o to cleanup the tx queues the hal is called, so detach * it last */ ieee80211_detach(&asc->asc_isc); ath_desc_free(asc); ddi_taskq_destroy(asc->asc_tq); ath_txq_cleanup(asc); asc->asc_ah->ah_detach(asc->asc_ah); /* free io handle */ ddi_regs_map_free(&asc->asc_io_handle); pci_config_teardown(&asc->asc_cfg_handle); /* destroy locks */ mutex_destroy(&asc->asc_rxbuflock); mutex_destroy(&asc->asc_genlock); mutex_destroy(&asc->asc_resched_lock); ddi_remove_minor_node(devinfo, NULL); ddi_soft_state_free(ath_soft_state_p, ddi_get_instance(devinfo)); return (DDI_SUCCESS); } /* * quiesce(9E) entry point. * * This function is called when the system is single-threaded at high * PIL with preemption disabled. Therefore, this function must not be * blocked. * * This function returns DDI_SUCCESS on success, or DDI_FAILURE on failure. * DDI_FAILURE indicates an error condition and should almost never happen. */ static int32_t ath_quiesce(dev_info_t *devinfo) { ath_t *asc; struct ath_hal *ah; int i; asc = ddi_get_soft_state(ath_soft_state_p, ddi_get_instance(devinfo)); if (asc == NULL || (ah = asc->asc_ah) == NULL) return (DDI_FAILURE); /* * Disable interrupts */ ATH_HAL_INTRSET(ah, 0); /* * Disable TX HW */ for (i = 0; i < HAL_NUM_TX_QUEUES; i++) { if (ATH_TXQ_SETUP(asc, i)) { ATH_HAL_STOPTXDMA(ah, asc->asc_txq[i].axq_qnum); } } /* * Disable RX HW */ ATH_HAL_STOPPCURECV(ah); ATH_HAL_SETRXFILTER(ah, 0); ATH_HAL_STOPDMARECV(ah); drv_usecwait(3000); /* * Power down HW */ ATH_HAL_PHYDISABLE(ah); return (DDI_SUCCESS); } DDI_DEFINE_STREAM_OPS(ath_dev_ops, nulldev, nulldev, ath_attach, ath_detach, nodev, NULL, D_MP, NULL, ath_quiesce); static struct modldrv ath_modldrv = { &mod_driverops, /* Type of module. This one is a driver */ "ath driver 1.4/HAL 0.10.5.6", /* short description */ &ath_dev_ops /* driver specific ops */ }; static struct modlinkage modlinkage = { MODREV_1, (void *)&ath_modldrv, NULL }; int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } int _init(void) { int status; status = ddi_soft_state_init(&ath_soft_state_p, sizeof (ath_t), 1); if (status != 0) return (status); mutex_init(&ath_loglock, NULL, MUTEX_DRIVER, NULL); ath_halfix_init(); mac_init_ops(&ath_dev_ops, "ath"); status = mod_install(&modlinkage); if (status != 0) { mac_fini_ops(&ath_dev_ops); ath_halfix_finit(); mutex_destroy(&ath_loglock); ddi_soft_state_fini(&ath_soft_state_p); } return (status); } int _fini(void) { int status; status = mod_remove(&modlinkage); if (status == 0) { mac_fini_ops(&ath_dev_ops); ath_halfix_finit(); mutex_destroy(&ath_loglock); ddi_soft_state_fini(&ath_soft_state_p); } return (status); }