# # Copyright 2005 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License, Version 1.0 only # (the "License"). You may not use this file except in compliance # with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or http://www.opensolaris.org/os/licensing. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # #pragma ident "%Z%%M% %I% %E% SMI" # # caps # # Terminfo Capability Database # # Copyright 1990, 1995 by Mortice Kern Systems Inc. All rights reserved. # # $Header: /team/ps/sun_xcurses/archive/local_changes/xcurses/src/lib/libxcurses/src/libc/xcurses/rcs/caps 1.4 1998/06/04 19:22:52 cbates Exp $ # # # DESCRIPTION # # This file and the companion AWK scripts are used to generate # # boolcode.c boolfnam.c boolname.c # numcode.c numfnam.c numname.c # strcode.c strfnam.c strname.c # term.h # # # FORMAT # # full-name terminfo-name termcap-code type comment # # full-name Name of the variable used within C source. # terminfo-name Name used by TIC or DUMP for terminfo definitions. # termcap-code Old termcap code name # type One of bool, number, str # comment # # Each field is separated. All blank lines and lines beginning # with '#' are ignored. # # # NOTE # # New capabilities must be placed at the end of the appropriate list. # This allows previous versions of programs to still function without # being recompiled. # auto_left_margin bw bw bool cub1 wraps from column 0 to last column auto_right_margin am am bool Terminal has automatic margins no_esc_ctlc xsb xb bool Beehive (f1=escape, f2=ctrl C) ceol_standout_glitch xhp xs bool Standout not erased by overwriting (hp) eat_newline_glitch xenl xn bool newline ignored after 80 cols (Concept) erase_overstrike eo eo bool Can erase overstrikes with a blank generic_type gn gn bool Generic line type (e.g. dialup, switch). hard_copy hc hc bool Hardcopy terminal has_meta_key km km bool Has a meta key (shift, sets parity bit) has_status_line hs hs bool Has extra status line insert_null_glitch in in bool Insert mode distinguishes nulls memory_above da da bool Display may be retained above the screen memory_below db db bool Display may be retained below the screen move_insert_mode mir mi bool Safe to move while in insert mode move_standout_mode msgr ms bool Safe to move in standout modes over_strike os os bool Terminal overstrikes status_line_esc_ok eslok es bool Escape can be used on the status line dest_tabs_magic_smso xt xt bool Tabs destructive, magic smso char (Teleray 1061) tilde_glitch hz hz bool Hazeltine; can't print ~'s transparent_underline ul ul bool underline character overstrikes xon_xoff xon xo bool Terminal uses xon/xoff handshaking needs_xon_xoff nxon nx bool Padding won't work, xon/xoff required prtr_silent mc5i 5i bool Printer won't echo on screen hard_cursor chts HC bool Cursor is hard to see non_rev_rmcup nrrmc NR bool smcup does not reverse rmcup no_pad_char npc NP bool Pad character doesn't exist non_dest_scroll_region ndscr ND bool Scroll region is non-destructive can_change ccc cc bool terminal can redefine existing color back_color_erase bce be bool Screen erased with background color hue_lightness_saturation hls hl bool Terminal uses only HLS color notation (Tektronix) col_addr_glitch xhpa YA bool Only positive motion for hpa/mhpa caps cr_cancels_micro_mode crxm YB bool Using cr turns off micro mode has_print_wheel daisy YC bool Printer needs operator to change character set row_addr_glitch xvpa YD bool Only positive motion for vpa/mvpa caps semi_auto_right_margin sam YE bool Printing in last column causes cr cpi_changes_res cpix YF bool Changing character pitch changes resolution lpi_changes_res lpix YG bool Changing line pitch changes resolution # Add new boolean capabilities before this line columns cols co number # of columns in a line init_tabs it it number Tabs initially every # spaces lines lines li number # of lines on screen or page lines_of_memory lm lm number Lines of memory if > lines. 0 means varies magic_cookie_glitch xmc sg number # of blank chars left by smso or rmso padding_baud_rate pb pb number Lowest baud rate where cr/nl padding needed virtual_terminal vt vt number Virtual terminal # (CB/Unix) width_status_line wsl ws number # columns in status line num_labels nlab Nl number # of labels on screen (start at 1) label_height lh lh number # rows in each label label_width lw lw number # cols in each label max_attributes ma ma number Max combined attr. terminal can display maximum_windows wnum MW number Max # of definable windows max_colors colors Co number Max # of colors on the screen max_pairs pairs pa number Max # of color-pairs on the screen no_color_video ncv NC number Video attributes that can't be used withcolors buffer_capacity bufsz Ya number # of bytes buffered before printing dot_vert_spacing spinv Yb number Spacing of pins vertically in pins per inch dot_horz_spacing spinh Yc number Spacing of dots horizontally in dots per inch max_micro_address maddr Yd number Max value in micro_..._address max_micro_jump mjump Ye number Max value in parm_..._micro micro_col_size mcs Yf number Character step size when in micro mode micro_line_size mls Yg number Line step size when in micro mode number_of_pins npins yH number Number of pins in print-head output_res_char orc Yi number Horz. res. in units per character output_res_line orl Yj number Vert. res. in units per line output_res_horz_inch orhi Yk number Horz. res. in units per inch output_res_vert_inch orvi Yl number Vert. res. in units per inch print_rate cps Ym number Print rate in characters per second wide_char_size widcs Yn number Character step size when in double wide mode buttons btns BT number Number of buttons on mouse bit_image_entwining bitwin Yo number Number of passes for each bit-map row bit_image_type bitype Yp number Type of bit image device # Add new numeric capabilities before this line back_tab cbt bt str Back tab (P) bell bel bl str Audible signal (bell) (P) carriage_return cr cr str Carriage return (P*) change_scroll_region csr cs str change to lines #1 through #2 (vt100) (PG) clear_all_tabs tbc ct str Clear all tab stops. (P) clear_screen clear cl str Clear screen (P*) clr_eol el ce str Clear to end of line (P) clr_eos ed cd str Clear to end of display (P*) column_address hpa ch str Set cursor column (PG) command_character cmdch CC str Term. settable cmd char in prototype cursor_address cup cm str Cursor motion to row #1 col #2 (PG) cursor_down cud1 do str Down one line cursor_home home ho str Home cursor (if no cup) cursor_invisible civis vi str Make cursor invisible cursor_left cub1 le str Move cursor left one space. cursor_mem_address mrcup CM str Memory relative cursor addressing. cursor_normal cnorm ve str Make cursor appear normal (undo vs/vi) cursor_right cuf1 nd str Non-destructive space (cursor right) cursor_to_ll ll ll str Last line, first column (if no cup) cursor_up cuu1 up str Upline (cursor up) cursor_visible cvvis vs str Make cursor very visible delete_character dch1 dc str Delete character (P*) delete_line dl1 dl str Delete line (P*) dis_status_line dsl ds str Disable status line down_half_line hd hd str Half-line down (forward 1/2 linefeed) enter_alt_charset_mode smacs as str Start alternate character set (P) enter_blink_mode blink mb str Turn on blinking enter_bold_mode bold md str Turn on bold (extra bright) mode enter_ca_mode smcup ti str String to end programs that use cup enter_delete_mode smdc dm str Delete mode (enter) enter_dim_mode dim mh str Turn on half-bright mode enter_insert_mode smir im str Insert mode (enter); enter_secure_mode invis mk str Turn on blank mode (chars invisible) enter_protected_mode prot mp str Turn on protected mode enter_reverse_mode rev mr str Turn on reverse video mode enter_standout_mode smso so str Begin stand out mode enter_underline_mode smul us str Start underscore mode erase_chars ech ec str Erase #1 characters (PG) exit_alt_charset_mode rmacs ae str End alternate character set (P) exit_attribute_mode sgr0 me str Turn off all attributes exit_ca_mode rmcup te str String to begin programs that use cup exit_delete_mode rmdc ed str End delete mode exit_insert_mode rmir ei str End insert mode; exit_standout_mode rmso se str End stand out mode exit_underline_mode rmul ue str End underscore mode flash_screen flash vb str Visible bell (may not move cursor) form_feed ff ff str Hardcopy terminal page eject (P*) from_status_line fsl fs str Return from status line init_1string is1 i1 str Terminal initialization string init_2string is2 is str Terminal initialization string init_3string is3 i3 str Terminal initialization string init_file if if str Name of file containing is insert_character ich1 ic str Insert character (P) insert_line il1 al str Add new blank line (P*) insert_padding ip ip str Insert pad after character inserted (P*) key_backspace kbs kb str Sent by backspace key key_catab ktbc ka str Sent by clear-all-tabs key. key_clear kclr kC str Sent by clear screen or erase key. key_ctab kctab kt str Sent by clear-tab key key_dc kdch1 kD str Sent by delete character key. key_dl kdl1 kL str Sent by delete line key. key_down kcud1 kd str Sent by terminal down arrow key key_eic krmir kM str Sent by rmir or smir in insert mode. key_eol kel kE str Sent by clear-to-end-of-line key. key_eos ked kS str Sent by clear-to-end-of-screen key. key_f0 kf0 k0 str Sent by function key f0. key_f1 kf1 k1 str Sent by function key f1. key_f10 kf10 k; str Sent by function key f10. key_f2 kf2 k2 str Sent by function key f2. key_f3 kf3 k3 str Sent by function key f3. key_f4 kf4 k4 str Sent by function key f4. key_f5 kf5 k5 str Sent by function key f5. key_f6 kf6 k6 str Sent by function key f6. key_f7 kf7 k7 str Sent by function key f7. key_f8 kf8 k8 str Sent by function key f8. key_f9 kf9 k9 str Sent by function key f9. key_home khome kh str Sent by home key. key_ic kich1 kI str Sent by ins char/enter ins mode key. key_il kil1 kA str Sent by insert line. key_left kcub1 kl str Sent by terminal left arrow key key_ll kll kH str Sent by home down key (lower left) key_npage knp kN str Sent by next-page key key_ppage kpp kP str Sent by previous-page key key_right kcuf1 kr str Sent by terminal right arrow key key_sf kind kF str Sent by scroll-forward/down key key_sr kri kR str Sent by scroll-backward/up key key_stab khts kT str Sent by set-tab key key_up kcuu1 ku str Sent by terminal up arrow key keypad_local rmkx ke str Out of keypad transmit mode keypad_xmit smkx ks str Put terminal in keypad transmit mode lab_f0 lf0 l0 str Labels on function key f0 if not f0 lab_f1 lf1 l1 str Labels on function key f1 if not f1 lab_f10 lf10 la str Labels on function key f10 if not f10 lab_f2 lf2 l2 str Labels on function key f2 if not f2 lab_f3 lf3 l3 str Labels on function key f3 if not f3 lab_f4 lf4 l4 str Labels on function key f4 if not f4 lab_f5 lf5 l5 str Labels on function key f5 if not f5 lab_f6 lf6 l6 str Labels on function key f6 if not f6 lab_f7 lf7 l7 str Labels on function key f7 if not f7 lab_f8 lf8 l8 str Labels on function key f8 if not f8 lab_f9 lf9 l9 str Labels on function key f9 if not f9 meta_off rmm mo str Turn off meta mode meta_on smm mm str Turn on meta mode (8th bit) newline nel nw str Newline (behaves like cr followed by lf) pad_char pad pc str Pad character (rather than null) parm_dch dch DC str Delete #1 chars (PG*) parm_delete_line dl DL str Delete #1 lines (PG*) parm_down_cursor cud DO str Move cursor down #1 lines. (PG*) parm_ich ich IC str Insert #1 blank chars (PG*) parm_index indn SF str Scroll forward #1 lines (PG) parm_insert_line il AL str Add #1 new blank lines (PG*) parm_left_cursor cub LE str Move cursor left #1 spaces (PG) parm_right_cursor cuf RI str Move cursor right #1 spaces. (PG*) parm_rindex rin SR str Scroll backward #1 lines (PG) parm_up_cursor cuu UP str Move cursor up #1 lines. (PG*) pkey_key pfkey pk str Prog funct key #1 to type string #2 pkey_local pfloc pl str Prog funct key #1 to execute string #2 pkey_xmit pfx px str Prog funct key #1 to xmit string #2 print_screen mc0 ps str Print contents of the screen prtr_off mc4 pf str Turn off the printer prtr_on mc5 po str Turn on the printer repeat_char rep rp str Repeat char #1 #2 times. (PG*) reset_1string rs1 r1 str Reset terminal completely to sane modes. reset_2string rs2 r2 str Reset terminal completely to sane modes. reset_3string rs3 r3 str Reset terminal completely to sane modes. reset_file rf rf str Name of file containing reset string. restore_cursor rc rc str Restore cursor to position of last sc. row_address vpa cv str Like hpa but sets row. (PG) save_cursor sc sc str Save cursor position. (P) scroll_forward ind sf str Scroll text up (P) scroll_reverse ri ri str Scroll text down (P) set_attributes sgr sa str Define the video attributes (PG9) set_tab hts st str Set a tab in all rows, current column. set_window wind wi str Current window is lines #1-#2 cols #3-#4 tab ht ta str Tab to next 8 space hardware tab stop. to_status_line tsl ts str Go to status line underline_char uc uc str Underscore one char and move past it up_half_line hu hu str Half-line up (reverse 1/2 linefeed) init_prog iprog iP str Path name of program for init key_a1 ka1 K1 str Upper left of keypad key_a3 ka3 K3 str Upper right of keypad key_b2 kb2 K2 str Center of keypad key_c1 kc1 K4 str Lower left of keypad key_c3 kc3 K5 str Lower right of keypad prtr_non mc5p pO str Turn on the printer for #1 bytes. char_padding rmp rP str Like ip but when in replace mode acs_chars acsc ac str Graphics char set pairs aAbBcC - defn=vt100 plab_norm pln pn str Prog label #1 to show string #2 key_btab kcbt kB str Sent by BackTab key enter_xon_mode smxon SX str Turn on xon/xoff handshaking exit_xon_mode rmxon RX str Turn off xon/xoff handshaking enter_am_mode smam SA str Turn on automatic margins exit_am_mode rmam RA str Turn off automatic margins xon_character xonc XN str xon character xoff_character xoffc XF str xoff character ena_acs enacs eA str Enable alternate character set label_on smln LO str Turn on soft labels label_off rmln LF str Turn off soft labels key_beg kbeg @1 str Sent by beginning key key_cancel kcan @2 str Sent by cancel key key_close kclo @3 str Sent by close key key_command kcmd @4 str Sent by command key key_copy kcpy @5 str Sent by copy key key_create kcrt @6 str Sent by create key key_end kend @7 str Sent by end key key_enter kent @8 str Sent by enter/send key key_exit kext @9 str Sent by exit key key_find kfnd @0 str Sent by find key key_help khlp %1 str Sent by help key key_mark kmrk %2 str Sent by mark key key_message kmsg %3 str Sent by message key key_move kmov %4 str Sent by move key key_next knxt %5 str Sent by next-object key key_open kopn %6 str Sent by open key key_options kopt %7 str Sent by options key key_previous kprv %8 str Sent by previous-object key key_print kprt %9 str Sent by print or copy key key_redo krdo %0 str Sent by redo key key_reference kref &1 str Sent by reference key key_refresh krfr &2 str Sent by refresh key key_replace krpl &3 str Sent by replace key key_restart krst &4 str Sent by restart key key_resume kres &5 str Sent by resume key key_save ksav &6 str Sent by save key key_suspend kspd &7 str Sent by suspend key key_undo kund &8 str Sent by undo key key_sbeg kBEG &9 str Sent by shift-beginning key key_scancel kCAN &0 str Sent by shift-cancel key key_scommand kCMD *1 str Sent by shift-command key key_scopy kCPY *2 str Sent by shift-copy key key_screate kCRT *3 str Sent by shift-create key key_sdc kDC *4 str Sent by shift-delete-char key key_sdl kDL *5 str Sent by shift-delete-line key key_select kslt *6 str Sent by select key key_send kEND *7 str Sent by shift-end key key_seol kEOL *8 str Sent by shift-eol key key_sexit kEXT *9 str Sent by shift-exit key key_sfind kFND *0 str Sent by shift-find key key_shelp kHLP #1 str Sent by shift-help key key_shome kHOM #2 str Sent by shift-home key key_sic kIC #3 str Sent by shift-insert-char key key_sleft kLFT #4 str Sent by shift-left key key_smessage kMSG %a str Sent by shift-message key key_smove kMOV %b str Sent by shift-move key key_snext kNXT %c str Sent by shift-next key key_soptions kOPT %d str Sent by shift-options key key_sprevious kPRV %e str Sent by shift-prev key key_sprint kPRT %f str Sent by shift-print key key_sredo kRDO %g str Sent by shift-redo key key_sreplace kRPL %h str Sent by shift-replace key key_sright kRIT %i str Sent by shift-right key key_srsume kRES %j str Sent by shift-resume key key_ssave kSAV !1 str Sent by shift-save key key_ssuspend kSPD !2 str Sent by shift-suspend key key_sundo kUND !3 str Sent by shift-undo key req_for_input rfi RF str Send next input char (for ptys) key_f11 kf11 F1 str Sent by function key 11 key_f12 kf12 F2 str Sent by function key 12 key_f13 kf13 F3 str Sent by function key 13 key_f14 kf14 F4 str Sent by function key 14 key_f15 kf15 F5 str Sent by function key 15 key_f16 kf16 F6 str Sent by function key 16 key_f17 kf17 F7 str Sent by function key 17 key_f18 kf18 F8 str Sent by function key 18 key_f19 kf19 F9 str Sent by function key 19 key_f20 kf20 FA str Sent by function key 20 key_f21 kf21 FB str Sent by function key 21 key_f22 kf22 FC str Sent by function key 22 key_f23 kf23 FD str Sent by function key 23 key_f24 kf24 FE str Sent by function key 24 key_f25 kf25 FF str Sent by function key 25 key_f26 kf26 FG str Sent by function key 26 key_f27 kf27 FH str Sent by function key 27 key_f28 kf28 FI str Sent by function key 28 key_f29 kf29 FJ str Sent by function key 29 key_f30 kf30 FK str Sent by function key 30 key_f31 kf31 FL str Sent by function key 31 key_f32 kf32 FM str Sent by function key 32 key_f33 kf33 FN str Sent by function key 33 key_f34 kf34 FO str Sent by function key 34 key_f35 kf35 FP str Sent by function key 35 key_f36 kf36 FQ str Sent by function key 36 key_f37 kf37 FR str Sent by function key 37 key_f38 kf38 FS str Sent by function key 38 key_f39 kf39 FT str Sent by function key 39 key_f40 kf40 FU str Sent by function key 40 key_f41 kf41 FV str Sent by function key 41 key_f42 kf42 FW str Sent by function key 42 key_f43 kf43 FX str Sent by function key 43 key_f44 kf44 FY str Sent by function key 44 key_f45 kf45 FZ str Sent by function key 45 key_f46 kf46 Fa str Sent by function key 46 key_f47 kf47 Fb str Sent by function key 47 key_f48 kf48 Fc str Sent by function key 48 key_f49 kf49 Fd str Sent by function key 49 key_f50 kf50 Fe str Sent by function key 50 key_f51 kf51 Ff str Sent by function key 51 key_f52 kf52 Fg str Sent by function key 52 key_f53 kf53 Fh str Sent by function key 53 key_f54 kf54 Fi str Sent by function key 54 key_f55 kf55 Fj str Sent by function key 55 key_f56 kf56 Fk str Sent by function key 56 key_f57 kf57 Fl str Sent by function key 57 key_f58 kf58 Fm str Sent by function key 58 key_f59 kf59 Fn str Sent by function key 59 key_f60 kf60 Fo str Sent by function key 60 key_f61 kf61 Fp str Sent by function key 61 key_f62 kf62 Fq str Sent by function key 62 key_f63 kf63 Fr str Sent by function key 63 clr_bol el1 cb str Clear to beginning of line, inclusive clear_margins mgc MC str Clear all margins top, bottom, and sides set_left_margin smgl ML str Set left margin at current column set_right_margin smgr MR str Set right margin at current column label_format fln Lf str Label format set_clock sclk SC str Set clock to hours #1, minutes #2, seconds #3 display_clock dclk DK str Display time-of-day clock remove_clock rmclk RC str Remove time-of-day clock create_window cwin CW str Define win #1 to go from #2,#3 to #4,#5 goto_window wingo WG str Go to window #1 hangup hup HU str hand-up phone dial_phone dial DI str Dial phone number #1 quick_dial qdial QD str Dail phone number #1, without progress detection tone tone TO str Select touch tone dialing pulse pulse PU str Select pulse dialing flash_hook hook fh str Flash the phone switch hook fixed_pause pause PA str Pause for 2-3 seconds wait_tone wait WA str Wait for dial tone user0 u0 u0 str User string 0 user1 u1 u1 str User string 1 user2 u2 u2 str User string 2 user3 u3 u3 str User string 3 user4 u4 u4 str User string 4 user5 u5 u5 str User string 5 user6 u6 u6 str User string 6 user7 u7 u7 str User string 7 user8 u8 u8 str User string 8 user9 u9 u9 str User string 9 orig_pair op op str Set default color-pair to the orignal one orig_colors oc oc str Set all color(-pair)s to the original ones initialize_color initc Ic str Initialize the definition of color initialize_pair initp Ip str Initialize color-pair set_color_pair scp sp str Set current color-pair to #1 set_foreground setf Sf str Set current foreground color #1 set_background setb Sb str Set current background color #1 change_char_pitch cpi ZA str Change # of characters per inch change_line_pitch lpi ZB str Change # of lines per inch change_res_horz chr ZC str Change horizontal resolution change_res_vert cvr ZD str Change vertical resolution define_char defc ZE str Define a character in a character set enter_doublewide_mode swidm ZF str Enable double wide printing enter_draft_quality sdrfq ZG str Set draft quality print enter_italics_mode sitm ZH str Enable italics enter_leftward_mode slm ZI str Enable leftward carriage motion enter_micro_mode smicm ZJ str Enable micro motion capabilities enter_near_letter_quality snlq ZK str Set near-letter quality enter_normal_quality snrmq ZL str Set normal quality print enter_shadow_mode sshm ZM str Enable shadow printing enter_subscript_mode ssubm ZN str Enable subscript printing enter_superscript_mode ssupm ZO str Enable superscript printing enter_upward_mode sum ZP str Enable upward carriage motion exit_doublewide_mode rwidm ZQ str Disable double wide printing exit_italics_mode ritm ZR str Disable italics exit_leftward_mode rlm ZS str Enable rightward (normal) carriage motion exit_micro_mode rmicm ZT str Disable micro motion capabilities exit_shadow_mode rshm ZU str Disable shadow printing exit_subscript_mode rsubm ZV str Disable subscript printing exit_superscript_mode rsupm ZW str Disable superscript printing exit_upward_mode rum ZX str Enable downward (normal) carriage motion micro_column_address mhpa ZY str Like column address for micro adjustment micro_down mcud1 ZZ str Like cursor_down for micro adjustment micro_left mcub1 Za str Like cursor_left for micro adjustment micro_right mcuf1 Zb str Like cursor_right for micro adjustment micro_row_address mvpa Zc str Like row_address for micro adjustment micro_up mcuu1 Zd str Like cursor_up for micro adjustment order_of_pins porder Ze str Matches software bits to print-head pins parm_down_micro mcud Zf str Like parm_down_cursor parm_left_micro mcub Zg str Like parm_left_cursor parm_right_micro mcuf Zh str Like parm_right_cursor parm_up_micro mcuu Zi str Like parm_up_cursor select_char_set scs Zj str Select character set set_bottom_margin smgb Zk str Set bottom margin at current line set_bottom_margin_parm smgbp Zl str Set bottom margin at line #1 or #2 lines from the bottom set_left_margin_parm smglp Zm str Set left (right) margin at column #1 (#2) set_right_margin_parm smgrp Zn str Set right margin at column #1 set_top_margin smgt Zo str Set top margin at current line set_top_margin_parm smgtp Zp str Set top (bottom) margin at line #1 (#2) start_bit_image sbim Zq str Start printing bit image graphics start_char_set_def scsd Zr str Start definition of character set stop_bit_image rbim Zs str Stop printing bit image graphics stop_char_set_def rcsd Zt str Stop definition of character set subscript_characters subcs Zu str List of "subscript-able" characters superscript_characters supcs Zv str List of "superscript-able" characters these_cause_cr docr Zw str Printing any of these chars causes cr zero_motion zerom Zx str No motion for the subsequent character char_set_names csnm Zy str List of character set names key_mouse kmous Km str Mourse event has occured mouse_info minfo Mi str Mouse status information req_mouse_pos reqmp RQ str Request mouse position report get_mouse getm Gm str Curses should get button events set_a_foreground setaf AF str Set foreground colour #1 using ANSI escape set_a_background setab AB str Set background colour #1 using ANSI escape pkey_plab pfxl xl str Prog key #1 to xmit #2 and show string #3 device_type devt dv str Indicate language/codeset support code_set_init csin ci str Init sequence for multiple codesets set0_des_seq s0ds s0 str Shift into codeset 0 (EUC set 0, ASCII) set1_des_seq s1ds s1 str Shift into codeset 1 set2_des_seq s2ds s2 str Shift into codeset 2 set3_des_seq s3ds s3 str Shift into codeset 3 set_lr_margin smglr ML str Set both left & right margins set_tb_margin smgtb MT str Set both top & bottom margins bit_image_repeat birep Xy str Repeat bit-image cell #1, #2 times bit_image_newline binel Zz str Move start of next row bit_image_carriage_return bicr Yv str Move start of same row color_names colornm Yw str Give name for color #1 define_bit_image_region defbi Yx str Define rectangular bit-image region end_bit_image_region endbi Yy str End a bit-image region set_color_band setcolor Yz str Change to ribbon color #1 set_page_length slines YZ str Set page length to #1 lines display_pc_char dispc S1 str Display PC character enter_pc_charset_mode smpch S2 str Enter PC character display mode exit_pc_charset_mode rmpch S3 str Exit PC character display mode enter_scancode_mode smsc S4 str Enter PC scancode mode exit_scancode_mode rmsc S5 str Exit PC scancode mode pc_term_options pctrm S6 str PC terminal options scancode_escape scesc S7 str Escape for scancode emulation alt_scancode_esc scesa S8 str Alternate escape for scancode emulation enter_horizontal_hl_mode ehhlm ?? str Horizontal highlight mode enter_left_hl_mode elhlm ?? str Left highlight mode enter_low_hl_mode elohlm ?? str Low highlight mode enter_right_hl_mode erhlm ?? str Right highlight mode enter_top_hl_mode ethlm ?? str Top highlight mode enter_vertical_hl_mode evhlm ?? str Vertical highlight mode set_a_attributes sgr1 ?1 str Define second set of attributes #1-#6 set_pglen_inch slength YI str Set page length to #1/100 of an inch # Add new string capabilities before this line