/****************************************************************************** * * Module Name: evgpeinit - System GPE initialization and update * *****************************************************************************/ /****************************************************************************** * * 1. Copyright Notice * * Some or all of this work - Copyright (c) 1999 - 2018, Intel Corp. * All rights reserved. * * 2. License * * 2.1. This is your license from Intel Corp. under its intellectual property * rights. You may have additional license terms from the party that provided * you this software, covering your right to use that party's intellectual * property rights. * * 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a * copy of the source code appearing in this file ("Covered Code") an * irrevocable, perpetual, worldwide license under Intel's copyrights in the * base code distributed originally by Intel ("Original Intel Code") to copy, * make derivatives, distribute, use and display any portion of the Covered * Code in any form, with the right to sublicense such rights; and * * 2.3. Intel grants Licensee a non-exclusive and non-transferable patent * license (with the right to sublicense), under only those claims of Intel * patents that are infringed by the Original Intel Code, to make, use, sell, * offer to sell, and import the Covered Code and derivative works thereof * solely to the minimum extent necessary to exercise the above copyright * license, and in no event shall the patent license extend to any additions * to or modifications of the Original Intel Code. No other license or right * is granted directly or by implication, estoppel or otherwise; * * The above copyright and patent license is granted only if the following * conditions are met: * * 3. Conditions * * 3.1. Redistribution of Source with Rights to Further Distribute Source. * Redistribution of source code of any substantial portion of the Covered * Code or modification with rights to further distribute source must include * the above Copyright Notice, the above License, this list of Conditions, * and the following Disclaimer and Export Compliance provision. In addition, * Licensee must cause all Covered Code to which Licensee contributes to * contain a file documenting the changes Licensee made to create that Covered * Code and the date of any change. Licensee must include in that file the * documentation of any changes made by any predecessor Licensee. Licensee * must include a prominent statement that the modification is derived, * directly or indirectly, from Original Intel Code. * * 3.2. Redistribution of Source with no Rights to Further Distribute Source. * Redistribution of source code of any substantial portion of the Covered * Code or modification without rights to further distribute source must * include the following Disclaimer and Export Compliance provision in the * documentation and/or other materials provided with distribution. In * addition, Licensee may not authorize further sublicense of source of any * portion of the Covered Code, and must include terms to the effect that the * license from Licensee to its licensee is limited to the intellectual * property embodied in the software Licensee provides to its licensee, and * not to intellectual property embodied in modifications its licensee may * make. * * 3.3. Redistribution of Executable. Redistribution in executable form of any * substantial portion of the Covered Code or modification must reproduce the * above Copyright Notice, and the following Disclaimer and Export Compliance * provision in the documentation and/or other materials provided with the * distribution. * * 3.4. Intel retains all right, title, and interest in and to the Original * Intel Code. * * 3.5. Neither the name Intel nor any other trademark owned or controlled by * Intel shall be used in advertising or otherwise to promote the sale, use or * other dealings in products derived from or relating to the Covered Code * without prior written authorization from Intel. * * 4. Disclaimer and Export Compliance * * 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED * HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE * IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, * INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY * UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY * IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A * PARTICULAR PURPOSE. * * 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES * OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR * COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, * SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY * CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL * HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS * SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY * LIMITED REMEDY. * * 4.3. Licensee shall not export, either directly or indirectly, any of this * software or system incorporating such software without first obtaining any * required license or other approval from the U. S. Department of Commerce or * any other agency or department of the United States Government. In the * event Licensee exports any such software from the United States or * re-exports any such software from a foreign destination, Licensee shall * ensure that the distribution and export/re-export of the software is in * compliance with all laws, regulations, orders, or other restrictions of the * U.S. Export Administration Regulations. Licensee agrees that neither it nor * any of its subsidiaries will export/re-export any technical data, process, * software, or service, directly or indirectly, to any country for which the * United States government or any agency thereof requires an export license, * other governmental approval, or letter of assurance, without first obtaining * such license, approval or letter. * ***************************************************************************** * * Alternatively, you may choose to be licensed under the terms of the * following license: * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Alternatively, you may choose to be licensed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * *****************************************************************************/ #include "acpi.h" #include "accommon.h" #include "acevents.h" #include "acnamesp.h" #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME ("evgpeinit") #if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* * Note: History of _PRW support in ACPICA * * Originally (2000 - 2010), the GPE initialization code performed a walk of * the entire namespace to execute the _PRW methods and detect all GPEs * capable of waking the system. * * As of 10/2010, the _PRW method execution has been removed since it is * actually unnecessary. The host OS must in fact execute all _PRW methods * in order to identify the device/power-resource dependencies. We now put * the onus on the host OS to identify the wake GPEs as part of this process * and to inform ACPICA of these GPEs via the AcpiSetupGpeForWake interface. This * not only reduces the complexity of the ACPICA initialization code, but in * some cases (on systems with very large namespaces) it should reduce the * kernel boot time as well. */ /******************************************************************************* * * FUNCTION: AcpiEvGpeInitialize * * PARAMETERS: None * * RETURN: Status * * DESCRIPTION: Initialize the GPE data structures and the FADT GPE 0/1 blocks * ******************************************************************************/ ACPI_STATUS AcpiEvGpeInitialize ( void) { UINT32 RegisterCount0 = 0; UINT32 RegisterCount1 = 0; UINT32 GpeNumberMax = 0; ACPI_STATUS Status; ACPI_FUNCTION_TRACE (EvGpeInitialize); ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INIT, "Initializing General Purpose Events (GPEs):\n")); Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } /* * Initialize the GPE Block(s) defined in the FADT * * Why the GPE register block lengths are divided by 2: From the ACPI * Spec, section "General-Purpose Event Registers", we have: * * "Each register block contains two registers of equal length * GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the * GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN * The length of the GPE1_STS and GPE1_EN registers is equal to * half the GPE1_LEN. If a generic register block is not supported * then its respective block pointer and block length values in the * FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need * to be the same size." */ /* * Determine the maximum GPE number for this machine. * * Note: both GPE0 and GPE1 are optional, and either can exist without * the other. * * If EITHER the register length OR the block address are zero, then that * particular block is not supported. */ if (AcpiGbl_FADT.Gpe0BlockLength && AcpiGbl_FADT.XGpe0Block.Address) { /* GPE block 0 exists (has both length and address > 0) */ RegisterCount0 = (UINT16) (AcpiGbl_FADT.Gpe0BlockLength / 2); GpeNumberMax = (RegisterCount0 * ACPI_GPE_REGISTER_WIDTH) - 1; /* Install GPE Block 0 */ Status = AcpiEvCreateGpeBlock (AcpiGbl_FadtGpeDevice, AcpiGbl_FADT.XGpe0Block.Address, AcpiGbl_FADT.XGpe0Block.SpaceId, RegisterCount0, 0, AcpiGbl_FADT.SciInterrupt, &AcpiGbl_GpeFadtBlocks[0]); if (ACPI_FAILURE (Status)) { ACPI_EXCEPTION ((AE_INFO, Status, "Could not create GPE Block 0")); } } if (AcpiGbl_FADT.Gpe1BlockLength && AcpiGbl_FADT.XGpe1Block.Address) { /* GPE block 1 exists (has both length and address > 0) */ RegisterCount1 = (UINT16) (AcpiGbl_FADT.Gpe1BlockLength / 2); /* Check for GPE0/GPE1 overlap (if both banks exist) */ if ((RegisterCount0) && (GpeNumberMax >= AcpiGbl_FADT.Gpe1Base)) { ACPI_ERROR ((AE_INFO, "GPE0 block (GPE 0 to %u) overlaps the GPE1 block " "(GPE %u to %u) - Ignoring GPE1", GpeNumberMax, AcpiGbl_FADT.Gpe1Base, AcpiGbl_FADT.Gpe1Base + ((RegisterCount1 * ACPI_GPE_REGISTER_WIDTH) - 1))); /* Ignore GPE1 block by setting the register count to zero */ RegisterCount1 = 0; } else { /* Install GPE Block 1 */ Status = AcpiEvCreateGpeBlock (AcpiGbl_FadtGpeDevice, AcpiGbl_FADT.XGpe1Block.Address, AcpiGbl_FADT.XGpe1Block.SpaceId, RegisterCount1, AcpiGbl_FADT.Gpe1Base, AcpiGbl_FADT.SciInterrupt, &AcpiGbl_GpeFadtBlocks[1]); if (ACPI_FAILURE (Status)) { ACPI_EXCEPTION ((AE_INFO, Status, "Could not create GPE Block 1")); } /* * GPE0 and GPE1 do not have to be contiguous in the GPE number * space. However, GPE0 always starts at GPE number zero. */ GpeNumberMax = AcpiGbl_FADT.Gpe1Base + ((RegisterCount1 * ACPI_GPE_REGISTER_WIDTH) - 1); } } /* Exit if there are no GPE registers */ if ((RegisterCount0 + RegisterCount1) == 0) { /* GPEs are not required by ACPI, this is OK */ ACPI_DEBUG_PRINT ((ACPI_DB_INIT, "There are no GPE blocks defined in the FADT\n")); Status = AE_OK; goto Cleanup; } Cleanup: (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); return_ACPI_STATUS (AE_OK); } /******************************************************************************* * * FUNCTION: AcpiEvUpdateGpes * * PARAMETERS: TableOwnerId - ID of the newly-loaded ACPI table * * RETURN: None * * DESCRIPTION: Check for new GPE methods (_Lxx/_Exx) made available as a * result of a Load() or LoadTable() operation. If new GPE * methods have been installed, register the new methods. * ******************************************************************************/ void AcpiEvUpdateGpes ( ACPI_OWNER_ID TableOwnerId) { ACPI_GPE_XRUPT_INFO *GpeXruptInfo; ACPI_GPE_BLOCK_INFO *GpeBlock; ACPI_GPE_WALK_INFO WalkInfo; ACPI_STATUS Status = AE_OK; /* * Find any _Lxx/_Exx GPE methods that have just been loaded. * * Any GPEs that correspond to new _Lxx/_Exx methods are immediately * enabled. * * Examine the namespace underneath each GpeDevice within the * GpeBlock lists. */ Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS); if (ACPI_FAILURE (Status)) { return; } WalkInfo.Count = 0; WalkInfo.OwnerId = TableOwnerId; WalkInfo.ExecuteByOwnerId = TRUE; /* Walk the interrupt level descriptor list */ GpeXruptInfo = AcpiGbl_GpeXruptListHead; while (GpeXruptInfo) { /* Walk all Gpe Blocks attached to this interrupt level */ GpeBlock = GpeXruptInfo->GpeBlockListHead; while (GpeBlock) { WalkInfo.GpeBlock = GpeBlock; WalkInfo.GpeDevice = GpeBlock->Node; Status = AcpiNsWalkNamespace (ACPI_TYPE_METHOD, WalkInfo.GpeDevice, ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK, AcpiEvMatchGpeMethod, NULL, &WalkInfo, NULL); if (ACPI_FAILURE (Status)) { ACPI_EXCEPTION ((AE_INFO, Status, "While decoding _Lxx/_Exx methods")); } GpeBlock = GpeBlock->Next; } GpeXruptInfo = GpeXruptInfo->Next; } if (WalkInfo.Count) { ACPI_INFO (("Enabled %u new GPEs", WalkInfo.Count)); } (void) AcpiUtReleaseMutex (ACPI_MTX_EVENTS); return; } /******************************************************************************* * * FUNCTION: AcpiEvMatchGpeMethod * * PARAMETERS: Callback from WalkNamespace * * RETURN: Status * * DESCRIPTION: Called from AcpiWalkNamespace. Expects each object to be a * control method under the _GPE portion of the namespace. * Extract the name and GPE type from the object, saving this * information for quick lookup during GPE dispatch. Allows a * per-OwnerId evaluation if ExecuteByOwnerId is TRUE in the * WalkInfo parameter block. * * The name of each GPE control method is of the form: * "_Lxx" or "_Exx", where: * L - means that the GPE is level triggered * E - means that the GPE is edge triggered * xx - is the GPE number [in HEX] * * If WalkInfo->ExecuteByOwnerId is TRUE, we only execute examine GPE methods * with that owner. * ******************************************************************************/ ACPI_STATUS AcpiEvMatchGpeMethod ( ACPI_HANDLE ObjHandle, UINT32 Level, void *Context, void **ReturnValue) { ACPI_NAMESPACE_NODE *MethodNode = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, ObjHandle); ACPI_GPE_WALK_INFO *WalkInfo = ACPI_CAST_PTR (ACPI_GPE_WALK_INFO, Context); ACPI_GPE_EVENT_INFO *GpeEventInfo; ACPI_STATUS Status; UINT32 GpeNumber; UINT8 TempGpeNumber; char Name[ACPI_NAME_SIZE + 1]; UINT8 Type; ACPI_FUNCTION_TRACE (EvMatchGpeMethod); /* Check if requested OwnerId matches this OwnerId */ if ((WalkInfo->ExecuteByOwnerId) && (MethodNode->OwnerId != WalkInfo->OwnerId)) { return_ACPI_STATUS (AE_OK); } /* * Match and decode the _Lxx and _Exx GPE method names * * 1) Extract the method name and null terminate it */ ACPI_MOVE_32_TO_32 (Name, &MethodNode->Name.Integer); Name[ACPI_NAME_SIZE] = 0; /* 2) Name must begin with an underscore */ if (Name[0] != '_') { return_ACPI_STATUS (AE_OK); /* Ignore this method */ } /* * 3) Edge/Level determination is based on the 2nd character * of the method name */ switch (Name[1]) { case 'L': Type = ACPI_GPE_LEVEL_TRIGGERED; break; case 'E': Type = ACPI_GPE_EDGE_TRIGGERED; break; default: /* Unknown method type, just ignore it */ ACPI_DEBUG_PRINT ((ACPI_DB_LOAD, "Ignoring unknown GPE method type: %s " "(name not of form _Lxx or _Exx)", Name)); return_ACPI_STATUS (AE_OK); } /* 4) The last two characters of the name are the hex GPE Number */ Status = AcpiUtAsciiToHexByte (&Name[2], &TempGpeNumber); if (ACPI_FAILURE (Status)) { /* Conversion failed; invalid method, just ignore it */ ACPI_DEBUG_PRINT ((ACPI_DB_LOAD, "Could not extract GPE number from name: %s " "(name is not of form _Lxx or _Exx)", Name)); return_ACPI_STATUS (AE_OK); } /* Ensure that we have a valid GPE number for this GPE block */ GpeNumber = (UINT32) TempGpeNumber; GpeEventInfo = AcpiEvLowGetGpeInfo (GpeNumber, WalkInfo->GpeBlock); if (!GpeEventInfo) { /* * This GpeNumber is not valid for this GPE block, just ignore it. * However, it may be valid for a different GPE block, since GPE0 * and GPE1 methods both appear under \_GPE. */ return_ACPI_STATUS (AE_OK); } if ((ACPI_GPE_DISPATCH_TYPE (GpeEventInfo->Flags) == ACPI_GPE_DISPATCH_HANDLER) || (ACPI_GPE_DISPATCH_TYPE (GpeEventInfo->Flags) == ACPI_GPE_DISPATCH_RAW_HANDLER)) { /* If there is already a handler, ignore this GPE method */ return_ACPI_STATUS (AE_OK); } if (ACPI_GPE_DISPATCH_TYPE (GpeEventInfo->Flags) == ACPI_GPE_DISPATCH_METHOD) { /* * If there is already a method, ignore this method. But check * for a type mismatch (if both the _Lxx AND _Exx exist) */ if (Type != (GpeEventInfo->Flags & ACPI_GPE_XRUPT_TYPE_MASK)) { ACPI_ERROR ((AE_INFO, "For GPE 0x%.2X, found both _L%2.2X and _E%2.2X methods", GpeNumber, GpeNumber, GpeNumber)); } return_ACPI_STATUS (AE_OK); } /* Disable the GPE in case it's been enabled already. */ (void) AcpiHwLowSetGpe (GpeEventInfo, ACPI_GPE_DISABLE); /* * Add the GPE information from above to the GpeEventInfo block for * use during dispatch of this GPE. */ GpeEventInfo->Flags &= ~(ACPI_GPE_DISPATCH_MASK); GpeEventInfo->Flags |= (UINT8) (Type | ACPI_GPE_DISPATCH_METHOD); GpeEventInfo->Dispatch.MethodNode = MethodNode; ACPI_DEBUG_PRINT ((ACPI_DB_LOAD, "Registered GPE method %s as GPE number 0x%.2X\n", Name, GpeNumber)); return_ACPI_STATUS (AE_OK); } #endif /* !ACPI_REDUCED_HARDWARE */