/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2005 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */ /* All Rights Reserved */ #pragma ident "%Z%%M% %I% %E% SMI" /* * getdev.c * * Contains * getdev Writes on the standard output stream a list of devices * that match certain criteria. */ #include #include #include #include #include #include #include #include /* * Local Definitions * TRUE Boolean TRUE value * FALSE Boolean FALSE value * EX_OK Exit Value if all went well * EX_ERROR Exit Value if an error occurred * EX_DEVTAB Exit Value if the device table couldn't be opened */ #ifndef TRUE #define TRUE (1) #endif #ifndef FALSE #define FALSE (0) #endif #define EX_OK 0 #define EX_ERROR 1 #define EX_DEVTAB 2 /* * Messages: * M_USAGE Usage error * M_DEVTAB Can't open the device table * M_NODEV Device not found in the device table * M_ERROR Unexpected or internal error */ #define M_USAGE "usage: getdev [-ae] [criterion [...]] [device [...]]" #define M_DEVTAB "Cannot open the device table: %s" #define M_NODEV "Device not found in the device table: %s" #define M_ERROR "Internal error, errno=%d" /* * Local (Static) Definitions and macros * buildcriterialist() Builds the criteria list from the command-line * builddevlist() Builds the device list from the command-line * lbl Buffer for the standard message label * txt Buffer for the standard message text * stdmsg(r,l,s,t) Write a standard message: * r Recoverability flag * l Standard label * s Severity * t Text */ static char **buildcriterialist(); static char **builddevlist(); static char lbl[MM_MXLABELLN+1]; static char txt[MM_MXTXTLN+1]; #define stdmsg(r,l,s,t) (void) fmtmsg(MM_PRINT|MM_UTIL|r,l,s,t,MM_NULLACT,MM_NULLTAG) /* * getdev [-ae] [criterion [...]] [device [...]] * * This command generates a list of devices that match the * specified criteria. * * Options: * -a A device must meet all of the criteria to be * included in the generated list instead of just * one of the criteria (the "and" flag) * -e Exclude the devices mentioned from the generated * list. If this flag is omitted, the devices in the * list are selected from the devices mentioned. * * Arguments: * criterion An expression that describes * a device attribute. * is a device attribute * may be = != : !: indicating equals, does not * equal, is defined, and is not defined * respectively * is the attribute value. Currently, the only * value supported for the : and !: operators * is * * device A device to select for or exclude from the generated * list * * Exit values: * EX_OK All went well * EX_ERROR An error (syntax, internal, or resource) occurred * EX_DEVTAB The device-table could not be opened for reading */ int main(int argc, char **argv) { /* * Automatic data */ char **arglist; /* List of arguments */ char **criterialist; /* List of criteria */ char **devicelist; /* List of devices to search/ignore */ char **fitdevlist; /* List of devices that fit criteria */ char *cmdname; /* Simple command name */ char *device; /* Device name in the list */ char *devtab; /* The device table name */ int exitcode; /* Value to return to the caller */ int sev; /* Message severity */ int optchar; /* Option character (from getopt()) */ int andflag; /* TRUE if criteria are to be anded */ int excludeflag; /* TRUE if exclude "devices" lists */ int options; /* Options to pass to getdev() */ int usageerr; /* TRUE if syntax error */ /* Build the message label from the (simple) command name */ if ((cmdname = strrchr(argv[0], '/')) != (char *) NULL) cmdname++; else cmdname = argv[0]; (void) strlcat(strcpy(lbl, "UX:"), cmdname, sizeof(lbl)); /* Write text-component of messages only (goes away in SVR4.1) */ (void) putenv("MSGVERB=text"); /* * Parse the command line: * - Options * - Selection criteria * - Devices to include or exclude */ /* * Extract options from the command line */ /* Initializations */ andflag = FALSE; /* No -a -- Or criteria data */ excludeflag = FALSE; /* No -e -- Include only mentioned devices */ usageerr = FALSE; /* No errors on the command line (yet) */ /* * Loop until all of the command line options have been parced */ opterr = FALSE; /* Don't let getopt() write messages */ while ((optchar = getopt(argc, argv, "ae")) != EOF) switch (optchar) { /* -a List devices that fit all of the criteria listed */ case 'a': if (andflag) usageerr = TRUE; else andflag = TRUE; break; /* -e Exclude those devices mentioned on the command line */ case 'e': if (excludeflag) usageerr = TRUE; else excludeflag = TRUE; break; /* Default case -- command usage error */ case '?': default: usageerr = TRUE; break; } /* If there is a usage error, write an appropriate message and exit */ if (usageerr) { stdmsg(MM_NRECOV, lbl, MM_ERROR, M_USAGE); exit(EX_ERROR); } /* Open the device file (if there's one to be opened) */ if (!_opendevtab("r")) { if (devtab = _devtabpath()) { (void) snprintf(txt, sizeof(txt), M_DEVTAB, devtab); sev = MM_ERROR; exitcode = EX_DEVTAB; } else { (void) sprintf(txt, M_ERROR, errno); sev = MM_HALT; exitcode = EX_ERROR; } stdmsg(MM_NRECOV, lbl, sev, txt); exit(exitcode); } /* Build the list of criteria and devices */ arglist = argv + optind; criterialist = buildcriterialist(arglist); devicelist = builddevlist(arglist); options = (excludeflag?DTAB_EXCLUDEFLAG:0)|(andflag?DTAB_ANDCRITERIA:0); /* * Get the list of devices that meets the criteria requested. If we * got a list (that might be empty), write that list to the standard * output file (stdout). */ exitcode = 0; if (!(fitdevlist = getdev(devicelist, criterialist, options))) { exitcode = 1; } else for (device = *fitdevlist++ ; device ; device = *fitdevlist++) (void) puts(device); /* Finished */ return(exitcode); } /* * char **buildcriterialist(arglist) * char **arglist * * Build a list of pointers to the criterion on the command-line * * Arguments: * arglist The list of arguments on the command-line * * Returns: char ** * The address of the first item of the list of criterion on the * command-line. This is a pointer to malloc()ed space. */ static char ** buildcriterialist(arglist) char **arglist; /* Pointer to the list of argument pointers */ { /* * Automatic data */ char **pp; /* Pointer to a criteria */ char **allocbuf; /* Pointer to the allocated data */ int ncriteria; /* Number of criteria found */ /* * Search the argument list, looking for the end of the list or * the first thing that's not a criteria. (A criteria is a * character-string that contains a colon (':') or an equal-sign ('=') */ pp = arglist; ncriteria = 0; while (*pp && (strchr(*pp, '=') || strchr(*pp, ':'))) { ncriteria++; pp++; } if (ncriteria > 0) { /* Allocate space for the list of criteria pointers */ allocbuf = (char **) malloc((ncriteria+1)*sizeof(char **)); /* * Build the list of criteria arguments */ pp = allocbuf; /* Beginning of the list */ while (*arglist && /* If there's more to do ... */ (strchr(*arglist, '=') || /* and it's a = criterion ... */ strchr(*arglist, ':'))) /* or it's a : criterion ... */ *pp++ = *arglist++; /* Include it in the list */ *pp = (char *) NULL; /* Terminate the list */ } else allocbuf = (char **) NULL; /* NO criteria */ return (allocbuf); } /* * char **builddevlist(arglist) * char **arglist * * Builds a list of pointers to the devices mentioned on the command- * line and returns the address of that list. * * Arguments: * arglist The address of the list of arguments to the * getdev command. * * Returns: char ** * A pointer to the first item in the list of pointers to devices * specified on the command-line */ static char ** builddevlist(arglist) char **arglist; /* Pointer to the list of pointers to args */ { /* * Automatic data */ /* * Search the argument list, looking for the end of the list or the * first thing that's not a criteria. It is the first device in the * list of devices (if any). */ while (*arglist && (strchr(*arglist, '=') || strchr(*arglist, ':'))) arglist++; /* Return a pointer to the argument list. */ return(*arglist?arglist:(char **) NULL); }