/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2013 Chris Torek * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef _BHYVE_VIRTIO_H_ #define _BHYVE_VIRTIO_H_ #include #include #include #ifdef __FreeBSD__ #include #include #endif /* * These are derived from several virtio specifications. * * Some useful links: * https://github.com/rustyrussell/virtio-spec * http://people.redhat.com/pbonzini/virtio-spec.pdf */ /* * A virtual device has zero or more "virtual queues" (virtqueue). * Each virtqueue uses at least two 4096-byte pages, laid out thus: * * +-----------------------------------------------+ * | "desc": descriptors, 16 bytes each | * | ----------------------------------------- | * | "avail": 2 uint16; uint16; 1 uint16 | * | ----------------------------------------- | * | pad to 4k boundary | * +-----------------------------------------------+ * | "used": 2 x uint16; elems; 1 uint16 | * | ----------------------------------------- | * | pad to 4k boundary | * +-----------------------------------------------+ * * The number that appears here is always a power of two and is * limited to no more than 32768 (as it must fit in a 16-bit field). * If is sufficiently large, the above will occupy more than * two pages. In any case, all pages must be physically contiguous * within the guest's physical address space. * * The 16-byte "desc" descriptors consist of a 64-bit guest * physical address , a 32-bit length , a 16-bit * , and a 16-bit field (all in guest byte order). * * There are three flags that may be set : * NEXT descriptor is chained, so use its "next" field * WRITE descriptor is for host to write into guest RAM * (else host is to read from guest RAM) * INDIRECT descriptor address field is (guest physical) * address of a linear array of descriptors * * Unless INDIRECT is set, is the number of bytes that may * be read/written from guest physical address . If * INDIRECT is set, WRITE is ignored and provides the length * of the indirect descriptors (and must be a multiple of * 16). Note that NEXT may still be set in the main descriptor * pointing to the indirect, and should be set in each indirect * descriptor that uses the next descriptor (these should generally * be numbered sequentially). However, INDIRECT must not be set * in the indirect descriptors. Upon reaching an indirect descriptor * without a NEXT bit, control returns to the direct descriptors. * * Except inside an indirect, each value must be in the * range [0 .. N) (i.e., the half-open interval). (Inside an * indirect, each must be in the range [0 .. /16).) * * The "avail" data structures reside in the same pages as the * "desc" structures since both together are used by the device to * pass information to the hypervisor's virtual driver. These * begin with a 16-bit field and 16-bit index , then * have 16-bit values, followed by one final 16-bit * field . The entries are simply indices * indices into the descriptor ring (and thus must meet the same * constraints as each value). However, is counted * up from 0 (initially) and simply wraps around after 65535; it * is taken mod to find the next available entry. * * The "used" ring occupies a separate page or pages, and contains * values written from the virtual driver back to the guest OS. * This begins with a 16-bit and 16-bit , then there * are "vring_used" elements, followed by a 16-bit . * The "vring_used" elements consist of a 32-bit and a * 32-bit (vu_tlen below). The is simply the index of * the head of a descriptor chain the guest made available * earlier, and the is the number of bytes actually written, * e.g., in the case of a network driver that provided a large * receive buffer but received only a small amount of data. * * The two event fields, and , in the * avail and used rings (respectively -- note the reversal!), are * always provided, but are used only if the virtual device * negotiates the VIRTIO_RING_F_EVENT_IDX feature during feature * negotiation. Similarly, both rings provide a flag -- * VRING_AVAIL_F_NO_INTERRUPT and VRING_USED_F_NO_NOTIFY -- in * their field, indicating that the guest does not need an * interrupt, or that the hypervisor driver does not need a * notify, when descriptors are added to the corresponding ring. * (These are provided only for interrupt optimization and need * not be implemented.) */ #define VRING_ALIGN 4096 /* * The address of any given virtual queue is determined by a single * Page Frame Number register. The guest writes the PFN into the * PCI config space. However, a device that has two or more * virtqueues can have a different PFN, and size, for each queue. * The number of queues is determinable via the PCI config space * VTCFG_R_QSEL register. Writes to QSEL select the queue: 0 means * queue #0, 1 means queue#1, etc. Once a queue is selected, the * remaining PFN and QNUM registers refer to that queue. * * QNUM is a read-only register containing a nonzero power of two * that indicates the (hypervisor's) queue size. Or, if reading it * produces zero, the hypervisor does not have a corresponding * queue. (The number of possible queues depends on the virtual * device. The block device has just one; the network device * provides either two -- 0 = receive, 1 = transmit -- or three, * with 2 = control.) * * PFN is a read/write register giving the physical page address of * the virtqueue in guest memory (the guest must allocate enough space * based on the hypervisor's provided QNUM). * * QNOTIFY is effectively write-only: when the guest writes a queue * number to the register, the hypervisor should scan the specified * virtqueue. (Reading QNOTIFY currently always gets 0). */ /* * PFN register shift amount */ #define VRING_PFN 12 /* * PCI vendor/device IDs */ #define VIRTIO_VENDOR 0x1AF4 #define VIRTIO_DEV_NET 0x1000 #define VIRTIO_DEV_BLOCK 0x1001 #define VIRTIO_DEV_CONSOLE 0x1003 #define VIRTIO_DEV_SCSI 0x1004 #define VIRTIO_DEV_RANDOM 0x1005 #define VIRTIO_DEV_9P 0x1009 #define VIRTIO_DEV_INPUT 0x1052 /* * PCI revision IDs */ #define VIRTIO_REV_INPUT 1 /* * PCI subvendor IDs */ #define VIRTIO_SUBVEN_INPUT 0x108E /* * PCI subdevice IDs */ #define VIRTIO_SUBDEV_INPUT 0x1100 /* From section 2.3, "Virtqueue Configuration", of the virtio specification */ static inline int vring_size_aligned(u_int qsz) { return (roundup2(vring_size(qsz, VRING_ALIGN), VRING_ALIGN)); } struct pci_devinst; struct vqueue_info; /* * A virtual device, with some number (possibly 0) of virtual * queues and some size (possibly 0) of configuration-space * registers private to the device. The virtio_softc should come * at the front of each "derived class", so that a pointer to the * virtio_softc is also a pointer to the more specific, derived- * from-virtio driver's softc. * * Note: inside each hypervisor virtio driver, changes to these * data structures must be locked against other threads, if any. * Except for PCI config space register read/write, we assume each * driver does the required locking, but we need a pointer to the * lock (if there is one) for PCI config space read/write ops. * * When the guest reads or writes the device's config space, the * generic layer checks for operations on the special registers * described above. If the offset of the register(s) being read * or written is past the CFG area (CFG0 or CFG1), the request is * passed on to the virtual device, after subtracting off the * generic-layer size. (So, drivers can just use the offset as * an offset into "struct config", for instance.) * * (The virtio layer also makes sure that the read or write is to/ * from a "good" config offset, hence vc_cfgsize, and on BAR #0. * However, the driver must verify the read or write size and offset * and that no one is writing a readonly register.) * * The BROKED flag ("this thing done gone and broked") is for future * use. */ #define VIRTIO_USE_MSIX 0x01 #define VIRTIO_EVENT_IDX 0x02 /* use the event-index values */ #define VIRTIO_BROKED 0x08 /* ??? */ struct virtio_softc { struct virtio_consts *vs_vc; /* constants (see below) */ int vs_flags; /* VIRTIO_* flags from above */ pthread_mutex_t *vs_mtx; /* POSIX mutex, if any */ struct pci_devinst *vs_pi; /* PCI device instance */ uint32_t vs_negotiated_caps; /* negotiated capabilities */ struct vqueue_info *vs_queues; /* one per vc_nvq */ int vs_curq; /* current queue */ uint8_t vs_status; /* value from last status write */ uint8_t vs_isr; /* ISR flags, if not MSI-X */ uint16_t vs_msix_cfg_idx; /* MSI-X vector for config event */ }; #define VS_LOCK(vs) \ do { \ if (vs->vs_mtx) \ pthread_mutex_lock(vs->vs_mtx); \ } while (0) #define VS_UNLOCK(vs) \ do { \ if (vs->vs_mtx) \ pthread_mutex_unlock(vs->vs_mtx); \ } while (0) struct virtio_consts { const char *vc_name; /* name of driver (for diagnostics) */ int vc_nvq; /* number of virtual queues */ size_t vc_cfgsize; /* size of dev-specific config regs */ void (*vc_reset)(void *); /* called on virtual device reset */ void (*vc_qnotify)(void *, struct vqueue_info *); /* called on QNOTIFY if no VQ notify */ int (*vc_cfgread)(void *, int, int, uint32_t *); /* called to read config regs */ int (*vc_cfgwrite)(void *, int, int, uint32_t); /* called to write config regs */ void (*vc_apply_features)(void *, uint64_t); /* called to apply negotiated features */ uint64_t vc_hv_caps; /* hypervisor-provided capabilities */ }; /* * Data structure allocated (statically) per virtual queue. * * Drivers may change vq_qsize after a reset. When the guest OS * requests a device reset, the hypervisor first calls * vs->vs_vc->vc_reset(); then the data structure below is * reinitialized (for each virtqueue: vs->vs_vc->vc_nvq). * * The remaining fields should only be fussed-with by the generic * code. * * Note: the addresses of vq_desc, vq_avail, and vq_used are all * computable from each other, but it's a lot simpler if we just * keep a pointer to each one. The event indices are similarly * (but more easily) computable, and this time we'll compute them: * they're just XX_ring[N]. */ #define VQ_ALLOC 0x01 /* set once we have a pfn */ #define VQ_BROKED 0x02 /* ??? */ struct vqueue_info { uint16_t vq_qsize; /* size of this queue (a power of 2) */ void (*vq_notify)(void *, struct vqueue_info *); /* called instead of vc_notify, if not NULL */ struct virtio_softc *vq_vs; /* backpointer to softc */ uint16_t vq_num; /* we're the num'th queue in the softc */ uint16_t vq_flags; /* flags (see above) */ uint16_t vq_last_avail; /* a recent value of vq_avail->idx */ uint16_t vq_next_used; /* index of the next used slot to be filled */ uint16_t vq_save_used; /* saved vq_used->idx; see vq_endchains */ uint16_t vq_msix_idx; /* MSI-X index, or VIRTIO_MSI_NO_VECTOR */ uint32_t vq_pfn; /* PFN of virt queue (not shifted!) */ struct vring_desc *vq_desc; /* descriptor array */ struct vring_avail *vq_avail; /* the "avail" ring */ struct vring_used *vq_used; /* the "used" ring */ }; /* as noted above, these are sort of backwards, name-wise */ #define VQ_AVAIL_EVENT_IDX(vq) \ (*(uint16_t *)&(vq)->vq_used->ring[(vq)->vq_qsize]) #define VQ_USED_EVENT_IDX(vq) \ ((vq)->vq_avail->ring[(vq)->vq_qsize]) /* * Is this ring ready for I/O? */ static inline int vq_ring_ready(struct vqueue_info *vq) { return (vq->vq_flags & VQ_ALLOC); } /* * Are there "available" descriptors? (This does not count * how many, just returns True if there are some.) */ static inline int vq_has_descs(struct vqueue_info *vq) { return (vq_ring_ready(vq) && vq->vq_last_avail != vq->vq_avail->idx); } /* * Deliver an interrupt to the guest for a specific MSI-X queue or * event. */ static inline void vi_interrupt(struct virtio_softc *vs, uint8_t isr, uint16_t msix_idx) { if (pci_msix_enabled(vs->vs_pi)) pci_generate_msix(vs->vs_pi, msix_idx); else { #ifndef __FreeBSD__ boolean_t unlock = B_FALSE; if (vs->vs_mtx && !pthread_mutex_isowned_np(vs->vs_mtx)) { unlock = B_TRUE; pthread_mutex_lock(vs->vs_mtx); } #else VS_LOCK(vs); #endif vs->vs_isr |= isr; pci_generate_msi(vs->vs_pi, 0); pci_lintr_assert(vs->vs_pi); #ifndef __FreeBSD__ if (unlock) pthread_mutex_unlock(vs->vs_mtx); #else VS_UNLOCK(vs); #endif } } /* * Deliver an interrupt to the guest on the given virtual queue (if * possible, or a generic MSI interrupt if not using MSI-X). */ static inline void vq_interrupt(struct virtio_softc *vs, struct vqueue_info *vq) { vi_interrupt(vs, VIRTIO_PCI_ISR_INTR, vq->vq_msix_idx); } static inline void vq_kick_enable(struct vqueue_info *vq) { vq->vq_used->flags &= ~VRING_USED_F_NO_NOTIFY; /* * Full memory barrier to make sure the store to vq_used->flags * happens before the load from vq_avail->idx, which results from a * subsequent call to vq_has_descs(). */ atomic_thread_fence_seq_cst(); } static inline void vq_kick_disable(struct vqueue_info *vq) { vq->vq_used->flags |= VRING_USED_F_NO_NOTIFY; } struct iovec; /* * Request description returned by vq_getchain. * * Writable iovecs start at iov[req.readable]. */ struct vi_req { int readable; /* num of readable iovecs */ int writable; /* num of writable iovecs */ unsigned int idx; /* ring index */ }; void vi_softc_linkup(struct virtio_softc *vs, struct virtio_consts *vc, void *dev_softc, struct pci_devinst *pi, struct vqueue_info *queues); int vi_intr_init(struct virtio_softc *vs, int barnum, int use_msix); void vi_reset_dev(struct virtio_softc *); void vi_set_io_bar(struct virtio_softc *, int); int vq_getchain(struct vqueue_info *vq, struct iovec *iov, int niov, struct vi_req *reqp); void vq_retchains(struct vqueue_info *vq, uint16_t n_chains); void vq_relchain_prepare(struct vqueue_info *vq, uint16_t idx, uint32_t iolen); void vq_relchain_publish(struct vqueue_info *vq); void vq_relchain(struct vqueue_info *vq, uint16_t idx, uint32_t iolen); void vq_endchains(struct vqueue_info *vq, int used_all_avail); uint64_t vi_pci_read(struct pci_devinst *pi, int baridx, uint64_t offset, int size); void vi_pci_write(struct pci_devinst *pi, int baridx, uint64_t offset, int size, uint64_t value); #ifndef __FreeBSD__ void vi_vq_init(struct virtio_softc *, uint32_t); #endif #endif /* _BHYVE_VIRTIO_H_ */