Lines Matching refs:rval
386 int rval = USB_FAILURE; in pl2303_open_port() local
395 return (rval); in pl2303_open_port()
400 if ((rval = pl2303_pm_set_busy(plp)) != USB_SUCCESS) { in pl2303_open_port()
402 return (rval); in pl2303_open_port()
406 rval = pl2303_open_hw_port(plp); in pl2303_open_port()
408 if (rval == USB_SUCCESS) { in pl2303_open_port()
423 return (rval); in pl2303_open_port()
471 int rval; in pl2303_usb_power() local
504 rval = pl2303_pwrlvl0(plp); in pl2303_usb_power()
508 rval = pl2303_pwrlvl1(plp); in pl2303_usb_power()
512 rval = pl2303_pwrlvl2(plp); in pl2303_usb_power()
516 rval = pl2303_pwrlvl3(plp); in pl2303_usb_power()
525 if ((rval == USB_SUCCESS) && in pl2303_usb_power()
539 return (rval); in pl2303_usb_power()
580 int rval; in pl2303_resume() local
589 rval = pl2303_restore_device_state(plp); in pl2303_resume()
591 rval = USB_SUCCESS; in pl2303_resume()
594 return (rval); in pl2303_resume()
653 int rval = USB_FAILURE; in pl2303_set_port_params() local
666 return (rval); in pl2303_set_port_params()
678 if ((rval = pl2303_cmd_get_line(plp, &bp)) != USB_SUCCESS) { in pl2303_set_port_params()
680 return (rval); in pl2303_set_port_params()
767 rval = pl2303_cmd_vendor_write0( in pl2303_set_port_params()
771 if (rval != USB_SUCCESS) { in pl2303_set_port_params()
790 if ((rval = pl2303_cmd_set_rtscts(plp)) in pl2303_set_port_params()
810 rval = pl2303_cmd_set_line(plp, bp); in pl2303_set_port_params()
814 if (rval != USB_SUCCESS) { in pl2303_set_port_params()
816 return (rval); in pl2303_set_port_params()
820 if ((rval = pl2303_cmd_get_line(plp, &bp)) != USB_SUCCESS) { in pl2303_set_port_params()
822 return (rval); in pl2303_set_port_params()
839 int rval = USB_FAILURE; in pl2303_set_modem_ctl() local
851 if ((rval = pl2303_cmd_set_ctl(plp, new_mctl)) == USB_SUCCESS) { in pl2303_set_modem_ctl()
857 return (rval); in pl2303_set_modem_ctl()
1037 int rval = USB_SUCCESS; in pl2303_fifo_drain() local
1059 return (rval); in pl2303_fifo_drain()
1179 int rval; in pl2303_restore_port_state() local
1190 if ((rval = pl2303_open_hw_port(plp)) != USB_SUCCESS) { in pl2303_restore_port_state()
1195 return (rval); in pl2303_restore_port_state()
1241 int rval; in pl2303_destroy_pm_components() local
1249 rval = pm_raise_power(dip, 0, USB_DEV_OS_FULL_PWR); in pl2303_destroy_pm_components()
1250 if (rval != DDI_SUCCESS) { in pl2303_destroy_pm_components()
1253 "raising power failed, rval=%d", rval); in pl2303_destroy_pm_components()
1256 rval = usb_handle_remote_wakeup(dip, in pl2303_destroy_pm_components()
1258 if (rval != USB_SUCCESS) { in pl2303_destroy_pm_components()
1261 "remote wakeup failed, rval=%d", rval); in pl2303_destroy_pm_components()
1280 int rval; in pl2303_pm_set_busy() local
1297 rval = pm_busy_component(dip, 0); in pl2303_pm_set_busy()
1298 ASSERT(rval == DDI_SUCCESS); in pl2303_pm_set_busy()
1310 rval = pm_raise_power(dip, 0, USB_DEV_OS_FULL_PWR); in pl2303_pm_set_busy()
1311 if (rval != DDI_SUCCESS) { in pl2303_pm_set_busy()
1363 int rval; in pl2303_pwrlvl0() local
1370 rval = usb_set_device_pwrlvl3(plp->pl_dip); in pl2303_pwrlvl0()
1371 ASSERT(rval == USB_SUCCESS); in pl2303_pwrlvl0()
1419 int rval; in pl2303_pwrlvl3() local
1426 rval = usb_set_device_pwrlvl0(plp->pl_dip); in pl2303_pwrlvl3()
1427 ASSERT(rval == USB_SUCCESS); in pl2303_pwrlvl3()
1649 int rval = USB_FAILURE; in pl2303_rx_start() local
1666 rval = usb_pipe_bulk_xfer(plp->pl_bulkin_ph, br, 0); in pl2303_rx_start()
1668 if (rval != USB_SUCCESS) { in pl2303_rx_start()
1670 "pl2303_rx_start: xfer failed %d", rval); in pl2303_rx_start()
1675 if (rval != USB_SUCCESS) { in pl2303_rx_start()
1679 return (rval); in pl2303_rx_start()
1694 int rval; in pl2303_tx_start() local
1761 rval = pl2303_send_data(plp, data); in pl2303_tx_start()
1764 if (rval != USB_SUCCESS) { in pl2303_tx_start()
1780 int rval; in pl2303_send_data() local
1797 rval = usb_pipe_bulk_xfer(plp->pl_bulkout_ph, br, 0); in pl2303_send_data()
1799 if (rval != USB_SUCCESS) { in pl2303_send_data()
1801 "pl2303_send_data: xfer failed %d", rval); in pl2303_send_data()
1807 return (rval); in pl2303_send_data()
1849 int rval = USB_SUCCESS; in pl2303_open_hw_port() local
1859 if ((rval = pl2303_cmd_vendor_write0(plp, SET_DCR0, in pl2303_open_hw_port()
1862 return (rval); in pl2303_open_hw_port()
1866 if ((rval = pl2303_cmd_vendor_write0(plp, SET_DCR1, in pl2303_open_hw_port()
1869 return (rval); in pl2303_open_hw_port()
1873 if ((rval = pl2303_cmd_vendor_write0(plp, SET_DCR2, in pl2303_open_hw_port()
1876 return (rval); in pl2303_open_hw_port()
1884 if ((rval = pl2303_cmd_vendor_write0(plp, SET_DCR0, in pl2303_open_hw_port()
1887 return (rval); in pl2303_open_hw_port()
1891 if ((rval = pl2303_cmd_vendor_write0(plp, SET_DCR1, in pl2303_open_hw_port()
1894 return (rval); in pl2303_open_hw_port()
1898 if ((rval = pl2303_cmd_vendor_write0(plp, SET_DCR2, in pl2303_open_hw_port()
1901 return (rval); in pl2303_open_hw_port()
1905 if ((rval = pl2303_cmd_vendor_write0(plp, in pl2303_open_hw_port()
1908 return (rval); in pl2303_open_hw_port()
1912 if ((rval = pl2303_cmd_vendor_write0(plp, in pl2303_open_hw_port()
1915 return (rval); in pl2303_open_hw_port()
1924 rval = USB_FAILURE; in pl2303_open_hw_port()
1927 return (rval); in pl2303_open_hw_port()
1946 int rval; in pl2303_cmd_get_line() local
1950 rval = usb_pipe_ctrl_xfer_wait(plp->pl_def_ph, &setup, data, in pl2303_cmd_get_line()
1953 if ((rval == USB_SUCCESS) && (*data != NULL)) { in pl2303_cmd_get_line()
1962 rval, cr, cb_flags); in pl2303_cmd_get_line()
1969 return (rval); in pl2303_cmd_get_line()
1984 int rval; in pl2303_cmd_set_line() local
1991 rval = usb_pipe_ctrl_xfer_wait(plp->pl_def_ph, &setup, &data, in pl2303_cmd_set_line()
1994 if (rval != USB_SUCCESS) { in pl2303_cmd_set_line()
1997 rval, cr, cb_flags); in pl2303_cmd_set_line()
2000 return (rval); in pl2303_cmd_set_line()
2015 int rval; in pl2303_cmd_set_ctl() local
2019 rval = usb_pipe_ctrl_xfer_wait(plp->pl_def_ph, &setup, NULL, in pl2303_cmd_set_ctl()
2022 if (rval != USB_SUCCESS) { in pl2303_cmd_set_ctl()
2025 rval, cr, cb_flags); in pl2303_cmd_set_ctl()
2028 return (rval); in pl2303_cmd_set_ctl()
2044 int rval; in pl2303_cmd_vendor_write0() local
2049 rval = usb_pipe_ctrl_xfer_wait(plp->pl_def_ph, &setup, NULL, in pl2303_cmd_vendor_write0()
2052 if (rval != USB_SUCCESS) { in pl2303_cmd_vendor_write0()
2055 value, index, rval, cr, cb_flags); in pl2303_cmd_vendor_write0()
2058 return (rval); in pl2303_cmd_vendor_write0()
2096 int rval; in pl2303_cmd_break() local
2100 rval = usb_pipe_ctrl_xfer_wait(plp->pl_def_ph, &setup, NULL, in pl2303_cmd_break()
2103 if (rval != USB_SUCCESS) { in pl2303_cmd_break()
2106 rval, cr, cb_flags); in pl2303_cmd_break()
2109 return (rval); in pl2303_cmd_break()